S o u n d B a r TABLE OF CONTENTS 04 10 12 17 Important Safety Instructions Remote Control Operation Specification Parts Description Installation Troubleshooting Warranty Information 09 11 16 18 IMPORTANT SAFETY INSTRUCTIONS Thank you for purchasing the Sound bar. Please read this user manual carefully and keep it for future reference. Warning Caution To reduce the risk of electric shock, do not dismantle the appliance and do not expose the appliance to rain or moisture. Seek services to qualified personnel only. The lightning flash within an equilateral triangle is intended to alert you to the presence of insulated dangerous voltage within the products enclosure that may be of sufficient magnitude to constitute an electric shock to a person or persons. Important! This symbol alerts you to read and observe important warnings and instructions on the unit or in this manual. 1. This appliance is not intended for use by persons (including children) with reduced physical sensory or mental capabili-
ties, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance. 2. To prevent possible hearing damage, do not listen at high volume levels for long time periods or a sudden high volume level. 3. Never use the device unsupervised! Switch off the device whenever you are not using it, even if not using it only for a short while. SOUND BAR | 4 IMPORTANT SAFETY INSTRUCTIONS 4. The appliance is not intended to be operated by means of an external timer or separate remote control system. 5. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard. 6. Before operating this system, check the voltage of this system to see if it is identical to the voltage of your local power supply. 7. The unit should not be impeded by covering the ventilation opening with items such as newspaper, table-cloths, curtains etc. Make sure that there are at least 8 inch of space above and at least 2 inch of space on each side of the unit. 8. The appliancemust not be exposed to dripping or splashing and that objects filled with liquids, such as vases, must not be placed on the appliance. 9. To prevent fire or shock hazard, do not expose this equipment to direct heat, rain, moisture or dust. 10. Do not locate this unit near any water sources e.g. taps, bathtubs, washing machines or swimming pools. Ensure that you place the unit on a dry, stable surface. 11. Do not place this unit close to a strong magnetic field. 12. Do not place the unit on a amplifier or receiver. 13. Do not place this unit in a damp area as the moisture will affect the life of electric components. 14. Do not attempt to clean the unit with chemical solvents as this might damage the finish. Wipe with a clean, dry or slightly damp cloth. 15. When removing the power plug from the wall outlet, always pull directly on the plug, never pull on the cord. 16. Depending on the electromagnetic waves used by a television broadcast, if a TV is turned on near this unit while its working, lines might appear on the LED TV. Neither this unit nor the TV is malfunctioning. If you see such lines, keep this unit far away from the TV set. 17. The mains plug is used to disconnect the device, the disconnected device should remain readily operable. 18. Do not use this appliance near water. 19. Clean only with dry cloth. 20. Do not block any ventilation openings. Install in accordance with the manufacturers instructions. SOUND BAR | 5 IMPORTANT SAFETY INSTRUCTIONS 21. Do not install near any heat sources such as radiators, heaters, stoves, or other appliance(including amplifiers) that pro-
duce heat. 22. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles or at the point where they exit from the appliance. 23. Only use attachments/accessories specified by the manufacturer. 24. Unplug this appliance during lightning storms or when not in use for long periods of time. 25. Refer all servicing to qualified service personel. Servicing is required when the appliance has been damage in any way, for example, when the power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the appli-
ance, the appliance has been exposed to rain or moisture, does not operate normally, or has been dropped. 26. The AC plug is used to disconnect the device, the disconnected device should remain readily operable. In order to discon-
nect the appliancefrom the AC power completely, the AC plug must be removed from the AC outlet completely. SOUND BAR | 6 PREPARING FOR USE Do not place near candles or other flames. Operate the product only as instructed in this manual. Before turning on the power for the first time, make sure the Sound bar is plugged to power outlet. For safety reasons, do not remove any covers or attempt to gain access to the inside of the product. Refer any servicing to qualified personnel. Do not attempt to remove any screws, or open the casing of the unit; there are no user serviceable parts inside. Refer all servicing to qualified service personnel. SOUND BAR | 8 INSTALLATION Place on a flat Surface Place the Sound bar horizontally on a flat surface such as a TV unit or shelves and align it centrally with the TV screen. Allow some space between the speaker and the wall. Dont place inside a cabinet or a walled shelf. Follow this guidance for best sound output and good airflow around the Sound bar. Mount on the wall WARNING: If you dont feel confident to correctly and securely wall-mount the Sound bar, seek the assis-
tance of an experienced person of professional. Install the speaker on a vertical, fast, reinforced area of wall. For plaster walls, it is recommended to screw into wall studs for greater security. For optimum per-
formance, allow at least 25mm/1distance between the Sound bar and the TV. 25mm / 1 25mm / 1 SOUND BAR | 11 WARRANTY INFORMATION RIF6 offers a 12-month warranty on all of our products purchased new and unused from RIF6 or an authorized reseller, with an original proof of purchase and where a defect has arisen, wholly or substantially, as a result of faulty manufacturing, parts or workmanship during the Warranty Period. The warranty does not apply where damage is caused by other factors, includ-
ing but without limitation: (a) normal wear and tear; (b) abuse, mishandling, accident or failure to follow operating instruc-
tions; (c) exposure to liquid or infiltration of foreign particles; (d) servicing or modification of the product other than by RIF6. These are our general terms for the warranty service, but we always urge our customers to reach out to us with any issue, regardless of warranty terms. If you experience an issue with a RIF6 product, please contact us at support@RIF6. com, and we will do our best to resolve it for you. WARNING This manual is to be used with all items with the model numbers RIF030079N Keep all plastic bags away from children. CONTACT US SOUND BAR | 18 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Note: The Grantee is not responsible for any changes or modifications not expressly approved by the party responsible for compliance. such modifications could void the user's authority to operate the equipment. The device has been evaluated to meet general RF exposure requirement. To maintain compliance with FCC's RF exposure guidelines, the distance must be at least 20 cm between the radiator and your body, and fully supported by the operating and installation configurations of transmitter and its antenna(s). learn more at rif6.com SOUND BAR | 20