all | frequencies |
|
exhibits | applications |
---|---|---|---|---|
manual |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
Manual | Users Manual | 1.75 MiB | ||||
1 | Cover Letter(s) | |||||||
1 | External Photos | |||||||
1 | ID Label/Location Info | |||||||
1 | Cover Letter(s) | |||||||
1 | Internal Photos | |||||||
1 | RF Exposure Info | |||||||
1 | Cover Letter(s) | |||||||
1 | Cover Letter(s) | |||||||
1 | Cover Letter(s) | |||||||
1 | Test Setup Photos | |||||||
1 | Test Report |
1 | Manual | Users Manual | 1.75 MiB |
Rimage Everest III printer User Guide Rimage Corporation reserves the right to make improvements to the equipment and software described in this document at any time without any prior notice. Rimage Corporation reserves the right to revise this publication and to make changes from time to time in the content hereof without obligation of Rimage Corporation to notify any person or organization of such revisions or changes. This document may contain links to web sites that were current at the time of publication, but may have moved or become inactive since. This document may contain links to sites on the Internet that are owned and operated by third parties. Rimage Corporation is not responsible for the content of any such third-party site. 2006, Rimage Corporation Rimage is a trademark of the Rimage Corporation. Everest Printer is a trademark of the Rimage Corporation. Dell is registered trademark of Dell Computer Corporation. FireWire is a registered trademark of Apple Computer, Inc. Macintosh is a registered trademark of Apple Computer, Inc. All other trademarks and registered trademarks are the property of their respective owners. Corporate Headquarters:
Rimage Corporation 7725 Washington Avenue South Minneapolis, MN 55439 USA 800 553 8312 (toll free US) Service: +1 952 946 0004
(International) Fax: +1 952 944 6956 European Headquarters:
Rimage Europe GmbH Hans-Bckler-Strae 7 63128 Dietzenbach, Germany Tel: +49-(0) 6074-8521-0 Fax: +49-(0) 6074-8521-21 CD and DVD Recording Software Disclaimer This Product, Software, or Documentation may be designed to assist you in reproducing material in which you own the copyright or have obtained permission to copy from the copyright owner. Unless you own the copyright or have permission to copy from the copyright owner, you may be violating copyright law and be subject to payment of damages and other remedies. If you are uncertain about your rights, you should contact your legal advisor. If you are neither in possession of the copyright nor have authorization from the owner of the copyright, unauthorized copying of CDs or DVDs violates national and international legislation and can result in severe penalties. Support information US, Asia/Pacific, Mexico/Latin America Europe Rimage Corporation 7725 Washington Avenue South Minneapolis, MN 55439 USA Attn: Rimage Services Service:
North America: 800-553-8312 Asia/Pacific, Mexico/ Latin America: 952-946-0004 FAX: 952-946-6956 When you contact Rimage Services, please provide:
Unit serial number and software version. Functional and technical description of the problem. Exact error message received. Rimage Europe GmbH Hans-Bckler-Strae 7 63128 Dietzenbach, Germany Tel: +49-(0) 6074-8521-0 FAX: +49-(0) 6074-8521-21 Rimage Europe Technical Website http://www.rimage.de/support.html Select the appropriate Support link to learn more. If you cannot find a solution on our website, email Rimage Services, Europe at support@rimage.de. Learn more online At www.rimage.com/support.html, you can experience Rimages world-class Support and Services. 1. Select your product family. 2. Select your product. 3. Learn more on your product page. From your product page you can access:
Information about the latest software and firmware updates Product specifications Troubleshooting tips and FAQs The latest documents Printing tips Current firmware and driver downloads Contents Contents Introduction ...................................................................................... 1 Printer Requirements.......................................................................................1 Operating System requirements............................................................................1 Media requirements...............................................................................................1 Ribbon requirements.............................................................................................1 Label design requirements....................................................................................2 Identify the parts of the Everest printer ......................................... 3 Front view........................................................................................................3 Control panel.........................................................................................................4 Rear view ........................................................................................................5 Everest printer switches ........................................................................................6 Operate the Everest printer ............................................................. 7 Powering on and off the Everest printer ..........................................................7 Installing the Everest printer driver ..................................................................7 Installing the Everest printer driver on Macintosh .................................................8 Placing a disc on the printer tray .....................................................................9 Setting up your printing preferences on a Windows PC ................................10 Navigate to printing preferences .........................................................................10 Setting media size, media type, orientation, and ribbon type..............................11 Setting print quality, color matching, and image adjustments .............................12 Setting the printable area ....................................................................................13 Adjusting the print alignment and color density...................................................14 Setting up your printing preferences on a Macintosh.....................................15 Navigate to printing preferences .........................................................................15 Setting media type, ribbon type, and print quality ...............................................15 Setting color matching, brightness, and threshold ..............................................16 Setting the printable area ....................................................................................17 Adjusting the print alignment and color density...................................................18 Checking the ribbon remaining......................................................................18 Maintain the Everest printer .......................................................... 20 Maintenance schedule...................................................................................20 Changing the print ribbon ..............................................................................21 Changing the retransfer ribbon......................................................................23 Cleaning the Everest printer ..........................................................................25 110875_A i Rimage Everest III printer Clean the print head............................................................................................25 Clean the tacky rollers.........................................................................................26 Clean the air filter ................................................................................................27 Clean the platen roller .........................................................................................28 Learn More ...................................................................................... 30 Everest Printer Specifications .............................................................................30 Technical support and product updates ..............................................................31 Safety information ...............................................................................................31 Safety testing.......................................................................................................32 Rimage Everest III Printer Limited 1 Year Warranty ...........................................36 ii Introduction Introduction This manual provides the information needed to operate the Rimage Everest III printer, identify the parts, and configure printing preferences. To unpack and set up your Everest printer, refer to the Everest Unpacking and Setup Instructions included with your product. Printer Requirements Operating System requirements The Rimage Everest printer is compatible only with Windows 2000 Professional, Windows XP Professional, and Macintosh OSX v 10.3/10.4. Media requirements You must use discs that are coated with a surface designed for thermal printing. The media in Rimage Media Kits is designed for optimum use in the Everest printer. For more information about Rimage Media Kits convenient packages of thermal retransfer-
printable discs and ribbons, all guaranteed by Rimage contact Rimage at 800-445-8288. Ribbon requirements
Important: Use only Everest III print ribbons with the Everest III printer. Print ribbons designed for the Everest II printer or earlier will not print correctly in the Everest III printer. The Everest printer requires a print ribbon and a retransfer ribbon. The standard print ribbon has three colors: Cyan, Magenta, and Yellow (CMY). These three colors combine in printing to create full color discs. Print ribbons are also available in black and CMY+White (CMY+W). Ribbons Part Number Number of Discs Printed 3-Color (CMY) 4-Color (CMY+W) Black (monochrome) Retransfer ribbon Retransfer ribbon 203638-001 203639-001 203640-001 203474-001 203384-001 500 375 1000 500 1000 110875_A 1 Rimage Everest III printer Label design requirements The Everest printer Windows compatible software ships with a label editor called CD Designer, which is installed on your PC during a typical installation of the Rimage software. If you have a Windows based PC, you can use CD Designer to design your labels.
Note: CD Designer is not Macintosh compatible and will not be installed with the Macintosh compatible software. If you have another software application that you prefer, or if you are using a Macintosh computer, you can create a label and save it as an Acrobat (.pdf) file, a .jpg file, or a .tiff file.
t!
o If you are using a standalone Everest printer or an AutoEverest AutoPrinter, you can print using a label file designed in any program. If your Everest printer is on a Rimage autoloader (except the AutoEverest AutoPrinter) and using Windows compatible software, only the Acrobat (.pdf) or CD Designer (.btw) file can print directly to the Everest printer. Importan o To create a label with a software application other than CD Designer, use the following criteria:
Color depth Save the artwork for the label with the color set to millions of colors. DPI Use pictures or logos set to 300 DPI (Dots Per Inch). Label design size A full size disc is 120 mm (4.723). The hole is 15 mm (0.59). The printable area and hub sizes vary depending on the disc manufacturer. Pri ntable Area 118 mm Hub Size 24 mm Media The media that is in Rimage Media Kits has a printable area of 24-118 mm. On most labels, print settings of 24 mm and 118 mm are recommended. For more information about Rimage Media Kits convenient packages of thermal retransfer-printable discs and ribbons, all guaranteed by Rimage contact Rimage at 800-445-8288. 2 110875_A Identify the parts of the Everest printer Identify the parts of the Everest printer This section describes the Everest printer hardware and features. Front view Side cover latches Side cover Handle Control panel Printer tray 110875_A 3 Rimage Everest III printer Control panel Image The control panel, located on the front of the printer, includes an operator button and four indicator lights. The control panel allows you to monitor and control the Everest printer.
Tip: If all indicator lights are blinking, the printer did not initialize properly. To correct this issue:
1. Remove the power cord. The Everest printer powers down. 2. Set the mode switch to the proper position. For more information, refer to the table on page 6. 3. Reconnect the power cord. The Everest printer powers on. Name Functionality Operator Button The operator button is used to complete the following tasks:
Open the printer tray Close the printer tray Reset after an error Put the printer in sleep mode
Tip: To put the printer into sleep mode, press and hold the operator button for 10 seconds. Press the operator button again to resume normal operation. Error indicator light The error indicator light, located on the operator button, illuminates when operator action is required. Disc Present indicator light Active indicator light The Disc present indicator light illuminates when a disc is placed on the tray or when the disc is properly clamped. The Disc present indicator light flashes when an Everest print latch is open or a ribbon is not detected. The active indicator light illuminates when the printer has completed initialization. The active indicator light flashes when the Everest printer is receiving data from the host. Power indicator light The power indicator light illuminates when the Everest printer is powered on. 4 110875_A Rear view Identify the parts of the Everest printer USB connector Mode switch Serial connector Voltage switch Power connector Original shipping screw position Shipping screw storage position 110875_A 5 Rimage Everest III printer Everest printer switches There are two switches on the rear of the Everest printer: the mode switch and the AC voltage switch. Mode switch Voltage switch Mode switch
Important! You must power off the Everest printer before changing the mode switch. The mode switch is a rotary switch used to set the operational mode of the Everest printer. The printer must be powered off for the mode to be changed. After changing the mode, the printer must be powered on again to recognize the change. The opening at the base of the cap on the switch indicates the selected mode. Switch Position 2 Regular operation Mode Switch Mode 3 5 9 Diagnostic Reserved AC voltage switch The AC voltage switch is used to select the AC voltage of the power outlet.
Warning! Set the AC voltage switch to match the AC voltage of the AC power outlet!
6 110875_A Operate the Everest printer Operate the Everest printer This section provides the information needed to use your Everest printer. Powering on and off the Everest printer The Everest printer does not have a power switch:
Note: The printer will go into sleep mode if it is idle for more than 30 minutes. When this occurs, the printer will take 2-3 minutes to warm up after a job is sent to the printer. If the Everest printer is on an autoloader, the printer is powered on when the autoloader is powered on. To power off the Everest printer, power off the autoloader. If the Everest printer is a standalone printer, connect the power cord from the Everest printer to a power outlet to power on the printer. To power off the Everest printer, disconnect the power cord. Installing the Everest printer driver Before printing, you must install the printer driver. If your Rimage Everest printer was included with an autoloader that has an embedded PC or a control center, the Everest printer driver is already installed. 1. Connect the Everest power cord to the printer. 2. Ensure that the Everest printer is powered on.
Note: If the Everest printer is a standalone printer (not on an autoloader), the Everest printer will power on when you connect the power cord. If the Everest printer is on an autoloader, the Everest printer will power on when you power on the autoloader. For more information, refer to Powering on and off the Everest printer on page 7. 3. Connect the USB cable from the Everest printer to the computer. 4. Insert the software disc in the computer disc drive. The printer driver will automatically install from the Rimage Software disc. 110875_A 7 Rimage Everest III printer 1. Installing the Everest printer driver on Macintosh
Important! To install the Everest printer driver, you must log on with an administrator account. Install the printer driver. a. Insert the software disc in the computer disc drive. b. Run the Rimage Everest Installer. c. Select the Install button. The installation begins. d. When the installation is complete, select Quit. The installation completes and the installation window closes. 2. Add the Everest printer to your printer list. Using OSX v 10.4 a. Navigate: System Preferences > Print & Fax. The Print & Fax window opens. b. From the Print & Fax window, select c. From the Printer Name list, select CDPR22. d. Select Add. The printer is added to the printer list and the Printer Browser window
. The Printer Browser window opens. closes. e. Close the Print & Fax window. Using OSX v 10.3 a. Navigate: System Preferences > Print & Fax. The Print & Fax window opens. b. From the Print & Fax window, select Setup Printers. The Printer List window opens. c. From the Printer List window, select Add. The Printer List window updates to display available printers. d. From the printer list popup menu, select USB. In the printer list, CDPR22 displays. e. From the printer list, select CDPR22. f. Select Add. The printer is added to your printer list and the Printer List window closes. g. Close the Print & Fax window. 8 110875_A Operate the Everest printer Placing a disc on the printer tray Use this procedure to place a disc on the printer tray.
Important! To avoid scratching or damaging the recording surface of the disc, you must place the disc properly on the printer tray. 1. To open the printer tray, press the operator button. 2. Place the disc on the print pad with the printable surface facing up and the stacking ring facing the print pad.
Important: The disc must not rest on the holding pins or the centering pin. Print pad Holding pins Printer tray Centering pin 110875_A 9 Rimage Everest III printer Setting up your printing preferences on a Windows PC Printing preferences allows you to set up your Everest printer to produce the best possible labels on your discs. Navigate to printing preferences Use either procedure below to navigate to the Everest Printing Preferences. Accessing Printing Preferences through Windows Start menu
Note: Using this method, printing preferences are saved in the printer driver settings. If you are printing labels from CD Designer, use the procedure below. 1. Navigate: Start > Printers and Faxes. 2. Right-click on the appropriate Everest printer. The dropdown menu displays. 3. From the dropdown menu, select Printing Preferences. The Rimage Everest III Printing Preferences dialog opens. Accessing Printer Preferences through CD Designer
Note: Using this method, printing preferences are saved with the label file and are used instead of the printer driver settings. 1. Open the desired label file in CD Designer. 2. From the File menu, select Print. The Print window opens. 3. From the Printer Name dropdown list, select Everest. 4. Select the Document Properties button. The Rimage Everest Properties dialog opens. Accessing Printer Preferences when printing PDFs Use the procedure below to access printing preferences for PDF files.
Important! The procedure below applies only if yo autoloader (except the AutoEverest Au toPrinter). 1. Navigate: Start > Printers and Faxes. 2. Right-click on the appropriate Everest printer. The dropdown menu displays. 3. From the dropdown menu, select Properties. The Rimage Everest III Prop 4. From the Rimage Everest III Properties dialog, select the Advanced tab. 5. At the bottom of the Advanced t Printing Defaults dialog opens. ab, select Printing Defaults The Rimage Everest III u are printing PDF labels using a Rimage erties dialog opens. 10 110875_A Operate the Everest printer Setting media size, media type, orientation, and ribbon type 1. Navigate to printing preferences (refer to page 10). 2. Select the Main tab. 3. View or change the printing preferences. a. From the Media Type dropdown list, select the appropriate Media Type. b. From the Media Size dropdown list, select the appropriate Media Size. c. Select the desired number of copies. d. Select the desired Orientation. e. From the Ribbon dropdown list, select the appropriate Ribbon Type. If you select CMY+White ribbon, select Manual or Auto:
Select the Manual radio button to send one color label file and then manually send another label file telling the printer where to apply the white background. Select the Auto radio button option to automatically print a white background. If you select Auto, select Complete White Undercoat or Make Pure White Transparent from the dropdown list.
The Complete White Undercoat selection applies a white background to the entire printable area of the disc. The printable area is defined on the Advanced tab.
The Make Pure White Transparent selection does not print the areas of a label that are pure white. 4. When you have made the desired choices, select Apply. 5. To close the Preferences window, select OK. 110875_A 11 Rimage Everest III printer Setting print quality, color matching, and image adjustments 1. Navigate to printing preferences (refer to page 10). 2. Select the Advanced tab. 3. View or change the printing preferences. a. From the Print Quality pane, select the desired Print Quality. b. From the Color Matching pane, select the desired Color Matching.
Note: The default setting for color matching is CMYK. c. From the Image Adjustments dropdown list, select None, High contrast, Vivid colors, or Custom. If you select Custom:
i. Select the Settings button. The Custom Settings window opens. ii. From the dropdown list, select the desired Print Threshold settings. iii. To adjust image contrast and saturation, move the Contrast and Saturation sliders. iv. To close the Custom Settings window, select OK. 4. When you have made the desired choices, select Apply. 5. To close the Printing Preferences window, select OK. 12 110875_A Operate the Everest printer Setting the printable area This functionality allows you to adjust the printable area settings for standard CD/DVD 120 mm media. This allows you to set the outer and inner diameters to print the disc label without overlapping the disc edges. 1. Navigate to printing preferences (refer to page 10). 2. Select the Advanced tab. 3. View or change the printing preferences. b. d. a. To modify the printable area, select Modify. The Printable Area Settings window opens. In the Standard Area settings, enter:
The desired outer diameter The desired inner diameter c. To print on a disc with a stacking ring, select the radio button labeled Advanced. In the Hub Area settings, enter:
The desired outer diameter The desired inner diameter e. To apply the settings, select OK. f. To close the window without applying the settings, select Cancel. 4. When you have made the desired choices, select Apply. 5. To close the Printing Preferences window, select OK.
Tip: Most discs like the one shown above have the following printable areas:
Outer Diameter 118 mm Inner Diameter 24 mm
Tip: Most discs like the one shown above have the following printable areas:
Standard Area Outer Diameter 118 mm Inner Diameter 38 mm Hub Area Outer Diameter 35 mm Inner Diameter 24 mm 110875_A 13 Rimage Everest III printer Adjusting the print alignment and color density 1. Navigate to printing preferences (refer to page 10). 2. Select the Utility tab. 3. From the Printer status pane, select Status. The Status Monitor window opens.
Tip: On the Status tab, you can view information about the Everest printer such as the current firmware version, the progress of a print job, the installed ribbon type, the percentage of unused ribbon remaining and the percentage of retransfer ribbon remaining. 4. From the Printer Information tab, select Settings for the setting you wish to modify. 5. View or change the Print Alignment Settings. a. From the Print Alignment Settings pane, select the Modify button. b. Select the desired print alignment settings. 6. View or change the Color Density Settings. a. From the Color Density Settings pane, select the Modify button. b. Select the desired color density settings. 7. To close the Status Monitor dialog, select Close. 14 110875_A Operate the Everest printer Setting up your printing preferences on a Macintosh Printing preferences allow you to set up your Everest printer to produce the best possible labels on your discs.
Note: The location of the preferences described in this section will change depending on the program used to print the label file. Navigate to printing preferences 1. Open the label file in the application of your choice. 2. From the File menu, select Print. The Print dialog opens. 3. From the Printer dropdown list, select CDPR22. Setting media type, ribbon type, and print quality 1. Navigate to printing preferences (refer to page 15). 2. From the presets pane popup menu select Everest III Settings. The Everest III Settings pane displays. 3. View or change the printing preferences. a. From the Media Type dropdown list, select the appropriate media type. b. From the Ribbon dropdown list, select the appropriate ribbon type. If you select CMY + White from the Ribbon dropdown list, from the Mode dropdown list select one of the following options:
The Auto: Complete white undercoat selection applies a white background everywhere on the printable area of the disc. The Auto: Make Pure white transparent selection makes pure white areas of an image transparent. Manual: Step 1 (CMY) and Manual: Step 2 (White) allow you to manually determine where a white background is applied. c. Select the desired print quality. 4. When you have made the desired choices, select Print. 110875_A 15 Rimage Everest III printer Setting color matching, brightness, and threshold 1. Navigate to printing preferences (refer to page 15). 2. From the presets pane popup menu select Everest III Colors. The Everest III Colors pane displays. 3. View or change the printing preferences. a. From the Color Matching dropdown list, select the desired color matching. b. From the Matching Method dropdown list, select the desired matching method. c. To modify the image brightness, move the Brightness slider. d. From the Threshold dropdown list, select the desired threshold. 4. When you have made the desired choices, select Print. 16 110875_A Operate the Everest printer Setting the printable area This functionality allows you to adjust the printable area settings for standard CD/DVD 120 mm media. This allows you to set the outer and inner diameters to print the disc label without overlapping the disc edges.
Note: Printable area settings created within a CD Designer label file will override the printer and fax settings on Windows.
Tip: Most discs like the one shown above have the following printable areas:
Outer Diameter 118 mm Inner Diameter 24 mm 1. Navigate to printing preferences (refer to page 15). 2. From the presets pane popup menu select Printable Area Settings. The Printable Area Settings pane displays. 3. View or change the printing preferences. a. To increase or decrease the standard printable area, enter the desired values in the Outer Diameter and Inner Diameter fields. b. To set the printable area for a disc with a stacking ring, select Advanced. The advanced settings display. i. To increase or decrease the hub area, enter the desired values in the Outer Diameter and Inner Diameter fields. 4. When you have made the desired choices, select Print. Tip: Most discs like the one shown above have the following printable areas:
S tandard Area Outer Diameter 118 mm eter 38 mm Inner Diam ub Area Outer Diameter 35 mm Inner Diameter 24 mm H
110875_A 17 Rimage Everest III printer Adjusting the print alignment and color density In the Everest III Utility, you can adjust the print alignment and the color density.
Tip: The Everest III Utility allows you to view information such as the current firmware version, the serial number, and the installed ribbon type. Through the Everest III Utility, you can also update your printer firmware. 1. Navigate to the Everest III Utility.
Note: The settings in the Everest III Utility can be modified only when the Everest printer is idle (no jobs currently printing). a. Navigate: System Preferences > Print & Fax. The Print & Fax window opens. b. If you are using OS X v10.3, in the Print & Fax window, select Set up Printers. The Printer list opens. c. From the printer list, select CDPR22. The CDPR22 window opens. d. From the CDPR22 toolbar, select Utility. The Everest III Utility opens. In the Everest III Utility, select the Alignment tab. The alignment settings display. 2. 3. View or change the alignment settings. a. To modify the horizontal alignment, in the Horizontal Alignment Settings pane, move the All Color slider. b. To modify the vertical alignment, in the Vertical Alignment Settings pane, move the Color and Monochrome sliders. 4. View or change the color density settings. In the Everest III Utility, select the Density tab. The density settings display. a. b. To modify the color density settings, in the Color Density Settings pane, move the Cyan, Magenta, and Yellow sliders. c. To modify the grayscale density settings, in the Grayscale Density Settings pane, move the Black slider. 5. To save the modified settings, select Save. Or To close the window without saving your changes, select Quit. Checking the ribbon remaining The operator panel on Producer III autoloaders will display the number of prints remaining on the print ribbon and the retransfer sheet. For stand alone Everest III printers and AutoPrinters, the Status tab in the Status monitor for Windows will allow you to view information about the Everest printer such as the current firmware version, the progress of a print job, the installed ribbon type, the percentage of unused ribbon remaining and the percentage of retransfer sheet remaining.
Tip: If you remove a ribbon from the Everest III printer and reinsert it, the system will recognize the amount of ribbon remaining in the consumable monitoring application. Parti Everest III printers will not display accurately in the consumable used ribbons from other monitoring application. ally 18 110875_A Operate the Everest printer 110875_A 19 Rimage Everest III printer environment. Maintain the Everest printer
Important! For optimum performance, keep the Everest printer in a clean, dust-free To keep the Everest printer operating at optimum performance, you must maintain the Everest printer. Maintenance tasks and frequency are described in the table below. Maintenance schedule Frequency Task Change the print ribbon 3-Color Ribbon (CMY) Change the retransfer ribbon 4-Color Ribbon (CMY+W) Black Ribbon (monochrome) After 1000 discs After 500 discs After 375 discs After 1000 discs Clean the print head Recommended every 2000 discs (as needed) Clean the tacky rollers Recommended every 2000 discs (as needed) Clean the air filter As needed Clean the platen roller As needed The platen roller should be cleaned only if you notice a diminished print quality, such as white specks, on the printed disc. Required tools:
Tip: For best results, use the Everest cleaning kit, which includes the tools listed below. Sponge swabs with long handles High grade isopropyl alcohol 20 110875_A Maintain the Everest printer Changing the print ribbon Before changing the Everest print ribbon, allow time for the new ribbon to become acclimated to the environment. Allow more time for greater temperature and/or humidity differences.
Important! Ribbons must be stored at a temperature between 50 90F (1032C). Avoid moisture and direct sunlight. Do not reuse ribbons. Before you begin:
Power off the printer. 1. Remove the print ribbon. a. Press the two cover latches to release the side cover. b. Lower the side cover. c. Turn latch 1 counter-
clockwise. d. Remove the print ribbon carrier. e. Remove the print ribbon from the carrier. 2. Discard the used print ribbon.
Tip: Perform cleaning procedures while the print ribbon is removed. Refer to Cleaning the Everest printer on page 25. Cover latches Side cover Print ribbon carrier Latch 1 110875_A 21 Rimage Everest III printer Large opening Small shaft Tacky roller 3. Install the new print ribbon. a. Remove the new ribbon b. c. from the packaging. Install the supply roll end of the print ribbon on the top of the carrier. Insert the large shaft in the large opening and press the small shaft into place.
Note: The ribbon must come over the tacky roller. d. Wrap the ribbon around the guide rollers. Install the take up roll. e. f. Rotate the take up roll so the ribbon is aligned and lies flat.
Tip: You may need to lift the ribbon up from the tacky roller to straighten it. Note: If you installe monocolor ribbon, advance the ribbon so the ink portion of the ribbon is nced to the take up adva roll.
d a Supply roll Guide rollers Pull handle Supply roll Take up roll 4. Reassemble the printer. a. Slide the carrier into the printer. b. Close latch 1. c. Close the side cover. 5. Power on the printer. The printer is ready. 22 110875_A Maintain the Everest printer Changing the retransfer ribbon Before changing the Everest retransfer ribbon, allow time for the new ribbon to become acclimated to the environment. Allow more time for greater temperature and/or humidity differences. Ribbons must be stored at a temperature between 50 90F (1032C). Avoid moisture and direct sunlight. Do not reuse ribbons. Before you begin:
Power off the printer. 1. Remove the retransfer ribbon. Cover latches a. Press the two cover latches to release the side cover. b. Lower the side cover. c. Open latches 1, 2, and 3. d. Pull out the retransfer ribbon carrier.
Note: The retransfer ribbon carrier cannot be removed from the printer. e. To remove the retransfer ribbon from the carrier, lift the retransfer rolls up and carefully slide the retransfer ribbon from the retransfer ribbon carrier. Side cover Retransfer ribbon carrier Latch 2 Latch 3 110875_A 23 Rimage Everest III printer 2. Discard the used retransfer ribbon. 3. Install the new retransfer ribbon. a. Remove the retransfer ribbon from the packaging. Supply roll Take up roll b. With the supply roll on the left side, slide both retransfer rolls under the retransfer ribbon carrier. Install the supply roll on the left side of the carrier and snap the roll into place. c. d. Bring the take up roll up and around the guide rollers and snap the roll into place. e. Ensure that the retransfer ribbon is aligned and straight across all the ribbon guides. f. To take up the ribbon slack, turn the take up roll counterclockwise 4. Reassemble the printer. a. Slide the retransfer carrier into the printer. b. Close latches 1, 2, and 3. c. Close the side cover. 5. Power on the printer. The printer is ready. Position of lower guide 24 110875_A Maintain the Everest printer Cleaning the Everest printer Clean the print head Before you begin:
Power off the printer. 1. Access the print head. a. Press the two cover latches to release the side cover. b. Lower the side cover. c. Open latch 1. d. Remove the print ribbon carrier. For specific instructions, refer to page 21. 2. Clean the print head. Latch 1 Printhead
Caution! Wipe the print head from one end to the other. Do not stop wiping in the middle of the print head.
Caution! Do not scratch the print head. The white area in the picture shows the area to clean. a. Apply isopropyl alcohol to the sponge swab. b. Use the sponge swab to wipe across the print head from one end to the other. c. Repeat as needed until the print head is clean of dust and debris. d. Use the sponge swab to remove any waxy buildup from the roller below the print head. Wipe direction 3. Prepare the printer for use. Install the print ribbon carrier. a. b. Close all latches. c. Close the side cover. d. Power on the printer. The printer is ready. 110875_A 25 Rimage Everest III printer Clean the tacky rollers Before you begin:
Power off the printer. 1. Remove the print ribbon. For specific instructions, refer to page 21. 2. To access the tacky rollers, remove the supply roll (the unused portion) of the print ribbon from the print ribbon carrier. 3. Clean the tacky rollers. a. Apply isopropyl alcohol to the sponge swab. b. Use the sponge swab to clean tacky roller 1. c. Use the sponge swab to remove any waxy buildup from other parts of the ribbon carrier. Ribbon carrier d. Reinstall the supply roll on the print ribbon carrier. Inside the printer, use the sponge swab to wipe tacky roller 2. e. 4. Prepare the printer for use. Install the print ribbon carrier. a. b. Close all latches. c. Close the side cover. d. Power on the printer. The printer is ready. Tacky roller 1 Tacky roller 2 Ribbon carrier 26 110875_A Clean the air filter Before you begin:
Power off the printer. 1. Remove the air filter. a. At the rear of the Everest printer, remove the two screws holding the fan cover. b. Remove the air filter. 2. Clean the air filter. a. Use water to clean the air filter. b. Allow the air filter to dry. 3. Prepare the printer for use. Maintain the Everest printer Fan cover Screws a. When the air filter is dry, place it inside the fan cover. b. Use the two screws to attach the fan cover. c. Power on the printer. The printer is ready. 110875_A 27 Rimage Everest III printer Clean the platen roller
Important! The platen roller should be cleaned only if you notice a diminished print quality, such as white specks on the printed disc. Before you begin:
1. Ensure that the printer is powered off. 2. At the back of the printer, change the mode switch to position 3
(Diagnostic Mode). 3. Power on the printer. 1. Access the platen roller. a. Press the two cover latches to release the side cover. b. Lower the side cover. c. Open latches 1, 2, and 3. d. Remove the print ribbon carrier. For specific instructions, refer to page 21. e. Pull out the retransfer ribbon carrier. For specific instructions, refer to page 23.
Note:
The retransfer ribbon carrier cannot be removed from the printer. 2. To access and select diagnostic 1, press and hold the operator button for 2 seconds. The platen roller rotates and the front panel Active indicator light blinks. 3. Clean the platen roller.
Caution! Do not apply pressure when cleaning the platen roller with the sponge swabs. Applying pressure may damage the platen roller, leaving scratch marks on the printed disc. a. Apply isopropyl alcohol to the sponge swab. b. As the platen roller rotates, use the sponge swab to wipe the platen roller, allowing it to rotate a full turn before moving to the next area. Platen roller 4. Press and release the 5. Power off the printer. operator button to exit diagnostics mode. Retransfer ribbon carrier 28 110875_A 6. Prepare the printer for use. Maintain the Everest printer Install the print ribbon carrier. Install the retransfer ribbon carrier. a. b. c. Close all latches. d. Close the side cover. e. Turn the mode switch to the correct operating position. For more information, refer to page 6. f. Power on the printer. The printer is ready. 110875_A 29 Rimage Everest III printer Learn More Everest Printer Specifications Item Printing Speed
(including tray cycle time) Printing Modes Print Quality Media Types Ribbons Ribbon Capacity Physical Properties Interface Power Operating Temperature Relative Humidity Minimum System Requirements Description 60 seconds or less for CMY color coverage. 66 seconds for CMY+W First print is 5 minutes, which includes warm-up time. Monochrome, CMY, and CMY+W Equivalent of 160 LPI (Lines Per Inch) using variable dot technology CDs or DVDs with Everest-compatible coating Monochrome (Black) CMY (Cyan, Magenta, and Yellow) CMY+W (Cyan, Magenta, Yellow, and White) Retransfer Ribbon = 1000 discs or 500 discs Black Ribbon = 1000 discs CMY Ribbon = 500 discs CMY+W Ribbon = 375 discs 9.5 H x 9.5 W x 15.35 D (24.2 cm x 24.2 cm x 39.0 cm) Depth with print tray extended 22.25 or 56.5 cm Left side cover open for print ribbon replacement add additional 9.1 or 23 cm 44 lbs (20 Kg) Shipping Weight 49 lbs USB (Universal Serial Bus) B type connector 100-240 VAC, 50-60 Hz, 500 Watts, 3.9 Amps at 115 VAC/ 2.9 Amps at 220 VAC. 59 F to 86 F (15 C to 30 C) 30% to 70% non-condensing Windows-based PC Pentium 300 or better with 128MB RAM Windows 2000 Professional or XP Professional USB port Macintosh computer G3 or better with 128 MB RAM Macintosh OS X v 10.3/10.4 USB port 30 110875_A Learn More Technical support and product updates Support for the Rimage Everest printer is available through your authorized reseller.
Important: Register your Rimage Everest printer so we can notify you of upgrades as they become available. Safety information This manual and the indications on the product allow proper and safe operation. The indication marks below help protect you and other persons from injury, and equipment from damage.
Warning! According to ANSI (American National Standards Institute) standards, a warning is used to indicate situations that could result in bodily injury to personnel operating or maintaining the equipment.
Caution: Indicates that failure to observe this guideline could result in loss or damage to the equipment, product, software, or data. To ensure safety, please rea before using the equipment. Safety Precautions d the precautions in the User Guide and familiarize yourself with their meaning
Warning! This printer has a vol tage slide switch on the back of the unit. Before use, check that it is set to the correct voltage. Please do not use any voltage other than 110VAC or 220VAC. This could result in a fire and an electric shock.
Warning! Do not disassemble or use tools on the printer. All service procedures should be performe by an authorized field technician, or sent in for repair. Do not service the printer with the pow er cord plugged in the AC outlet. d be opened by han d. Do not insert your fingers. Warning! The front bezel of the printer can
Warning! Do not touch the heater roller.
Warning! The interior of the printer contains Warning! Keep out of reach of children. Caution! Any equipment that has AC line voltage, or low DC voltages, such as switches, power supplies, fuses, fans, non-stepper motors, must be replaced with Rimageapproved components to maintain the safety approval issued by UL. sharp edges.
Caution! This printer has no power switch. Power is disconne cted completely by unplugging the cable. Rimage recommends installing the printer i power cable. Always hold the plug n a position that allows immediate disconnection of the when disconnecting the cable from the outlet.
Caution! Do not use the printer if it is overheating, or an abnormal smell is detected. T a fire and an electric shock. In case of heating or abnormal smell, immediately disconnect the cable from the o utlet. Contact your dealer for repairs. his may result in
Caution! This product is designed for an office environment.
Caution! Do not use outdoors
Caution! If used outside of own premises, general authorization is required. 110875_A 31 Rimage Everest III printer
Caution! Allow s moving. ufficient free space for opening the printer tray. Do not touch the printer tray while it is
Caution! If the side cover is opened while p printer while it is operating. Do not attempt to bypass the door interlock. ower is supplied, the printer will stop. Never reach into the Safety testing P roduct name: E verest III printer Model: CDPR22 Notice for USA e users authority to operate this equipment. Federal Communications Commissions (FCC) Warning Any unauthorized modification to this equipment may result in the revocation by the FCC of th Federal Communications Commissions (FCC) Notice This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not in ca se harmful interference to radio communica guarantee that interference will not occur in a p equipment does cause harmful interference to radio or television re whi h can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the followin mea Reorient or relocate the receiving antenna Connect the equipment into an outlet on a circuit different from that to Increase the separation between the equipment and receiver. stalled and used in accordance with the instructions, may tions. However, there is no articular installation. If this sures:
ception, u c g which the receiver is connected. r d to comply without maximum w levels of RF energy that is deeme pplement C to OET65. This equipment has very d equipment and meets the FCC/IC radio frequency (RF) Consult the dealer or an experienced radio/TV technician for help. This equipment complies with FCC/IC radiation exposure limits set forth fo uncontrolle Exposure Guidelines in Su lo permissive exposure evaluation (MPE). But it is desirable that it should be installed and operated with at least 8 in (20 cm) or more between the radiator and the persons body (excluding extremities: hands, wrists, fe a nd legs). Additional FCC Notices Properly shielded and grounded cables and connectors must be used for connection to host computer a emission limits. nd/or peripherals in order to meet FCC et 32 110875_A Learn More afety precautions for RF exposure S This transmitter must not be co-located other antenna or transmitter. or operated in conjunction with any Product Safety Statement This product complies with UL 60950-1. Notice for Canada Canadian Department of Communications (DOC) Statement C This Class B digital apparatus complies with Canadian ICES-003 Issue 3:
Cet appareil numerique de la classe B est conforme a l a norme NMB-003 du Canade. 1997. This product complies with CAN/CSA-C22.2 No. 60950-1-03 1st edition. Notice for Europe This product is in conformity with the EMC Directive (89/336/EEC) and the Low-Voltage Directive (73/23/EEC) through compliance with the following European standards:
EN 60950:2000, EN 55022:1998 + A1:2000 & A2: 2003, EN 55024:1998 &
2003, EN 61000-3-2:2000; EN 61000-3-3:1995 & A1: 2001. The CE mark has been A1: 2001& A2:
110875_A 33 Rimage Everest III printer ation declares that this equipment Everest III printer, affixed in accordance with the CE Marking Directive 93/68/EEC. Hereby, Rimage Corpor model CDPR22 is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. Hiermit erklrt Rimage Corporation, dass sich das Gert Everest III printer in bereinstimmung mit den grundlegenden Anforderungen und den brigen einschlgigen Bestimmungen der Richtlinie 1999/5/EG befindet. Por medio de la presente Rimage Corporation declara que el Everest III cumple con los requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 1999/5/CE. Notice for France Notice for Italy Par la prsente Rimage Corporation dclare que l'appareil Everest III printer est conforme aux exigences essentielles et aux autres dispositions pertinentes de la directive 1999/5/CE. v rme va exigibles de la Directiva 1999/5/CE. Con la presente Rimage Corporation dichiara che questo Everest III confo ai requisiti essenziali ed alle altre disposizioni pertinenti stabilite dalla diretti 1999/5/CE. Jmno vrobce] tmto prohlauje, e tento Everest III printer je ve shod se ce 1999/5/ES. zkladnmi poadavky a dalmi pslunmi ustanovenmi smrni Undertegnede Rimage Corporation erklrer herved, at flgende udstyr Everest III printer overholder de vsentlige krav og vrige relevante krav i direkti 1999/5/EF. Por medio de la presente Rimage Corporation declara que el Everest III printer cumple con los requisitos esenciales y cualesquiera otras disposiciones aplicables o Rimage Corporation Everest III printer 1999/5/. Hierbij verklaart Rimage Corporation dat het toestel Everest III printer in overeenstemming is met de essentile eisen en de andere relevante bepalingen van richtlijn 1999/5/EG. Rimage Corporation decl requisitos essenc Niniejs zasadn Dyrektywy 1999/5/EC. Rimage Corp direktiivin 1999/5/EY oleellisten vaatimusten ja sit koskevien direkt ehtojen mukainen. Hrmed intygar Rimage Corporation att denna Everest III printer str I verensstmmelse med de vsentliga egenskapskrav och vriga relevanta bestmmelser som framgr av direktiv 1999/5/EG. iais e outras disposies da Directiva zym Rimage Corporation s iczymi wymogami oraz pozostaymi stosownym ara que este Everest III printer est conforme com os oration vakuuttaa tten ett Everest III pr a, e Evere t III printe i postanowieniami inter tyyppinen la r jest zgodny z 1999/5/CE. iivin muiden owiadcz ite on Rimage Corporation erklrer herved at utstyret Everest III printer er i samsvar med de grunnleggende krav og vrige relevante krav i direktiv 1999/5/EF. Notice for Norway This subsection does not apply for the geographical area within a radius of 20km from the centre of Ny-Alesund. Hr me lsir Rimage Corporation yfir v a Everest III printer er samrmi vi grunnkrfur og arar krfur, sem gerar eru tilskipun 1999/5/EC. Rimage Corporation tmto vyhlasuje, e Everest III printer spa zkladn poiadavky a vetky prslun ustanovenia Smernice 1999/5/ES. 110875_A 34 Learn More 1999/5/ES. imus ir kitas 1999/5/EB Direktyvos nuostatas. Rimage Corporation izjavlja, da je ta Everest III printer v skladu z bistvenimi zahtevami in ostalimi relevantnimi doloili direktive Alulrott, Rimage Corporation nyilatkozom, hogy a Everest III printer megfelel a vonatkoz alapvet kvetelmnyeknek s az 1999/5/EC irnyelv egyb elrsainak. Hawnhekk, Rimage Corporation, jiddikjara li dan Everest III printer jikkonforma mal-tiijiet essenzjali u ma provvedimenti orajn relevanti li hemm fid-Dirrettiva 1999/5/EC. iuo Rimage Corporation deklaruoja, kad is Everest III printer atitinka esminius reikalav Ar o Rimage Corporation deklar, ka Everest III printer atbilst Direktvas tiskajm prasbm un citiem ar to saisttajiem noteikumiem. 1999/5/EK b Kesolevaga kinnitab Rimage Corporation seadme Everest III printer vastavust direktiivi 1999/5/E phinuetele ja nimetatud direktiivist tulenevatele teistele asjakohastele stetele. Notice for Japan VCCI This product complies with VCCI V.3/2005.04 Notice for Australia CTICK This p with AS/NZS CISPR22:2004 roduct complies 110875_A 35 Rimage Everest III printer Rimage Everest III Printer Limited 1 Year Warranty Rimage warrants, to the original end user only, that all non-consumable parts of the Everest printer will be free from defects in material or workmanship for 12 months, according to the following terms:
Rimage will replace or repair, at Rimage's discretion, any non-consumable parts found defective within the Warranty period. Valid from the date Rimage ships the product to you. Factory depot repair:
To Rimages location in Minnesota from a location within the US or Canada with a typical response of 15 business days. To Rimages location in Germany from a location in Europe with a typical response of 15 business days. To Rimage Minnesota from a location that is not in the US or Canada with a typical response of up to 25 business days. Several Maintenance Contracts that provide faster service are available for an additional fee. Rimage will pay ground service freight charges for components shipped to you. The use of non-Rimage certified parts may void this warranty. This Warranty does not include the following:
Work done at the customer's location, or customer's loss of data. Shipment costs of equipment or components returned to the Rimage factory. Equipment malfunctions as a result of repairs made by technicians who are not authorized or certified by Rimage. Software and/or firmware enhancements released after purchase of the product. Equipment or parts that were tampered with, misused, neglected, or that were modified in any respect without the written consent of Rimage. Equipment or parts that have been damaged due to shipping or accidents, or damaged by lightning, storms, water, or power surges. Printer consumables including ribbons, transfer sheets, or print head. You may not assign this Warranty without Rimage's written consent. Rimage is the intended beneficiary of this Warranty; if there is any inconsistency between this Warranty and any other agreement included with or relating to Rimage products, this Warranty shall govern. If any term of this Warranty is illegal or unenforceable, the legality and enforceability of the remaining provisions are not affected or impaired. This Warranty is to be interpreted under the laws of the State of Minnesota, without giving effect to conflict of law rules. Rimage must receive written notice of any claimed defect or failure to perform within five (5) days after such failure or defect is first observed. For warranty service, call Rimage at (952) 946-0004. The Limited Warranty set forth above is Rimage's only Warranty in connection with the Rimage Everest printers. All other Warranties, whether written or oral, express or implied, contractual or statutory, including, but not limited to any Warranties of merchantability or fitness for any particular purpose are specifically excluded and disclaimed. In no event shall Rimage's liability under this Warranty exceed the obligation to repair or replace, at Rimage's discretion, a Warranted product, and, without limiting the foregoing, Rimage's liability under this Warranty shall not exceed the cost of the covered product. 36 110875_A
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2006-05-16 | 2427 ~ 2469 | DSS - Part 15 Spread Spectrum Transmitter | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2006-05-16
|
||||
1 | Applicant's complete, legal business name |
Rimage Corporation
|
||||
1 | FCC Registration Number (FRN) |
0008247025
|
||||
1 | Physical Address |
7725 Washington Avenue South
|
||||
1 |
Minneapolis, Minnesota 55439
|
|||||
1 |
United States
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
h******@AmericanTCB.com
|
||||
1 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
QT5
|
||||
1 | Equipment Product Code |
CDPR22
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
Z****** T******
|
||||
1 | Title |
Compliance Engineer
|
||||
1 | Telephone Number |
(952)********
|
||||
1 | Fax Number |
(952)********
|
||||
1 |
z******@rimage.com
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
1 | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 06/30/2006 | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | DSS - Part 15 Spread Spectrum Transmitter | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Rimage Everest II printer | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Grant Comments | Power Output listed is Conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Only the antenna(s) tested in this filing, or similar, may be used with the transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
UL Japan, Inc. Yokowa EMC Lab.
|
||||
1 | Name |
T****** H******
|
||||
1 | Telephone Number |
+81-5********
|
||||
1 | Fax Number |
+81-5********
|
||||
1 |
T******@jp.ul.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | 17 | 2427.00000000 | 2469.00000000 | 0.0423000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC