146mm m m 2 8 Beams Battery Floodlight 1. Connect your Battery Floodight. Download the Ring app. The app walks you through setting up and managing your Floodlight. Search for Ring in one of these app stores, or visit: ring.com/app Set up your Ring Beams Bridge. The Bridge connects your Ring Beams lights to the rest of your Ring system. Your Bridge must be up and running before you set up your Floodlight. Download from Windows Store To set up your Bridge, follow the instructions in the Ring app or Bridge user manual. Download from Windows Store 3 Insert the batteries. Twist and pull off the front of the light, then press the side buttons on the battery compartment to open. Insert four D-cell batteries. 4 Set up your Floodlight in the Ring app. In the app, tap Set Up a Device. When prompted, select Beams and follow the in-app instructions. Once setup is complete, slide the battery cover back onto your Floodlight. Doorbells Security Cams Chimes Beams Alarm 5 2. Install your Floodlight. Press the tab on the side of the base, and slide the base off of your Floodlight. Use the base as a template to mark the screw holes. 6 Hold the base against the surface and drive the three mounting screws. The arrow marked UP on the base should point upwards once the base is mounted. Align your Floodlight with the base and slide it to the left to lock it in. The motion sensor is adjustable. Try various angles for the best performance. 7 For additional help, visit: ring.com/help Or give us a call US 1 800 656 1918 Canada 1 855 300 7289 Worldwide +1 310 929 7085 For a list of all our customer support numbers, visit:
ring.com/callus To review your warranty coverage, please visit www.ring.com/warranty. Patents: www.ring.com/patents 2018 Ring LLC or its affiliates. RING, ALWAYS HOME, and all related logos are trademarks of Ring LLC or its affiliates. Last updated: 09/18/18 with user's Rules. device the authority complies device cause harmful undesired This not cause void Part FCC the of 15 interference, this
(2) and operation. modifications or Changes to operate equipment. the NOTE:
has equipment been tested and This the FCC limits These aredesigned to Rules. installation. equipment uses generates, This accordance instructions, the cause may with occur not that in particular a will interference determined television can which be reception, interference of more measures:
one or the following antenna. or relocate receiving between Reorient Increase equipment separation the the the by
--
is Operation accept any expressly must not subject to the interference approved by following received, the party
(1) conditions:
two including responsible this interference device that compliance for may could may B found to comply with provide reasonable radio can radiate and harmful interference installation.If turning by limits protection the frequency to device, for Class a digital interference against harmful installed if energy and, not However, communications. does and off pursuant Part aresidential in used and in is there no guarantee radio interference to to the encouraged to try or correct radio this equipment equipment the of 15 to harmful cause on, the user is receiver. a to on an the that and the into outlet which circuit receiver different Connect equipment
--
--
from
--
FCC The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. experienced statement:
connected. technician Consult warning radio/TV dealer help. the for RF an or is