FCC ID: 2AEUPRBFBA001 Floodlight Battery

Floodlight Battery Smart Lighting 02_Battery_Floodlight_MANUAL.indd 1 1/8/19 2:40 PM 1. Set up your Floodlight. Download the Ring app. The app walks you through setting up and managing your Ring Floodlight Battery. Search for Ring in one of these app stores, or visit: ring.com/app Download from Windows Store Set up your Ring Bridge. The Bridge connects your Ring Smart Lights to the Ring app and other compatible Ring devices. Download from Windows Store To set up your Bridge, follow the instructions in the Ring app or the Bridge user manual. 2 02_Battery_Floodlight_MANUAL.indd 3 3 1/8/19 2:40 PM Remove the back cover. Twist your Floodlight counter-clockwise to unlock and separate it from the back cover. Remove the battery lid. Press the side buttons on the battery lid to remove it and open the battery compartment. 4 02_Battery_Floodlight_MANUAL.indd 5 5 1/8/19 2:40 PM Insert the batteries. Insert four D Cell batteries (not included), matching the flat ends with the springs. Then place the lid onto the compartment and push down to snap it into place. 6 02_Battery_Floodlight_MANUAL.indd 6-7 Insert four D-Cell batteries, then slide the battery cover back onto Floodlight Battery. Set up your Floodlight Battery in the Ring app. In the app, tap Set Up a Device. When prompted, select Smart Lights and follow the in-app instructions. After setup, replace the back cover

(be sure to line up the arrows). Doorbells Security Cams Chimes Smart Lights Alarm 1/8/19 2:40 PM 2. Install your Floodlight. Remove the mounting plate. Press the tab on the side and slide the mounting plate off of the back cover. 8 02_Battery_Floodlight_MANUAL.indd 9 Mark pilot holes. If installing on a masonry surface, use the mounting plate as a template to mark pilot holes, making sure the UP arrow is pointing upwards. Then drill the holes and insert the anchors. 9 1/8/19 2:40 PM Drive the screws. Hold the mounting plate firmly against the surface and drive the three mounting screws. 10 02_Battery_Floodlight_MANUAL.indd 10-11 Mount your Floodlight. Align your Floodlight with the mounting plate and slide it to the left to lock it in. The motion sensor is adjustable. Try various angles to find the best setting for your home. 11 1/8/19 2:40 PM For additional help, visit: ring.com/help Or give us a call US 1 800 656 1918 Canada 1 855 300 7289 Worldwide +1 310 929 7085 For a list of all our customer support numbers, visit: ring.com/callus To review your warranty coverage, please visit www.ring.com/warranty. Patents: www.ring.com/patents 2019 Ring LLC or its affiliates. Ring, Alexa, Always Home, and all related logos are trademarks of Amazon.com, Inc. or its affiliates. Last updated: 01/08/19 02_Battery_Floodlight_MANUAL.indd 12 1/8/19 2:40 PM 70mm 1523 26th St. Santa Monica, CA 90404 Models: Ring Motion Sensor (5SM1S8), Ring Spotlight (5B11S8), Ring Steplight (5LD1S8), Ring Pathlight (5LP1Y8), Ring Floodlight Battery (5B21S8), Ring Floodlight Wired

(5W21S8), Ring Transformer (5AT1S9) Canada CAN ICES-3 (B)/NMB-3(B) Innovation, Science and Economic Development Canada (ISED) Compliance. This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas license-exempt RSS(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Conformit Innovation Sciences et Dveloppement conomique Canada (ISDE) Lmetteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme aux CNR dInnovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes : (1) lappareil ne doit pas produire de brouillage, et (2) lutilisateur de lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. Information Regarding Exposure to Radio Frequency Energy: This equipment complies with IC RSS-102 RF exposure limits set forth for an uncontrolled environment. Informations concernant lexposition aux radiofrquences: Cet quipement est conforme aux limites dexposition aux rayonnements IC tablies pour un environnement non contrl. MPE Reminding This equipment should be installed and operated with minimum distance 20 cm between the radiator and your body. Cet quipement doit tre install et utilis avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps. United States This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. Information on this device is on file with the FCC and can be found by inputting the devices FCC ID into the FCC ID Search form available at https://www.fcc.gov/oet/ea/fccid. The output power of the radio technology used in the Products is below the radio frequency exposure limits set by the FCC. Nevertheless, it is advised to use the Products in such a manner that minimizes the potential for human contact during normal operation. This device should be installed and operated with at least 20 cm between the radiator and your body. General NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. m m 8 0 1 Ring_Smart_Lights_legal.indd 1 3/8/19 12:09 PM However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. Electrical ratings:

Motion Sensor: 3 x AAA-cell batteries Spotlight: 4 x D-cell batteries Steplight: 3 x C-cell batteries Pathlight: 4 x D-cell batteries Floodlight Battery: 4 x D-cell batteries Floodlight Wired: 110-240 VAC, 50-60 Hz Transformer: 120 VAC, 60 Hz, 200 W maximum load This device may require batteries for use. Only use the specified battery types. Never mix old and new batteries. Install batteries with correct polarity. Do not mix Alkaline, Standard Carbon Zinc, Rechargeable Nickel Cadmium or Nickel Metal Hydride batteries. Keep all of the batteries out of the reach of children. Do not open, disassemble, puncture, cut, bend, shred or heat the batteries. Remove all batteries if they are worn out or before storing your device for an extended period of time. Dispose of all batteries in accordance with applicable laws and regulations and do not dispose of batteries by throwing them into a fire. If any batteries begin to leak, take steps to prevent the fluid from coming into direct contact with skin or clothes as the fluid could be corrosive and may be toxic. Remove the batteries and clean the battery compartment in accordance with the battery manufacturers recommendations. Operating conditions:

Floodlight Battery: -4F to 122F (-20C to 50C) Floodlight Wired: -4F to 118F (-20C to 48C) Motion Sensor: -4F to 122F (-20C to 50C) Pathlight: -4F to 122F (-20C to 50C) Spotlight: -4F to 122F (-20C to 50C) Steplight: -4F to 122F (-20C to 50C) Transformer: -4F to 122F (-20C to 50C) Small parts may pose choking hazards. Keep device and box contents out of reach of children. To review your warranty coverage, please visit www.ring.com/warranty Patents: www.ring.com/patents 2019 Amazon.com, Inc. or its affiliates. RING, ALWAYS HOME, ALEXA, and all related logos are trademarks of Amazon.com, Inc. or its affiliates. Version 1.1 Ring_Smart_Lights_legal.indd 2 3/8/19 12:09 PM

Sample Agency Request Letter Authority to Act as Agent Date: 28 November 2019 TUV Rheinland Group 762 Park Avenue Youngsville, NC 27596 To Whom It May Concern:

I appoint TUV Rheinland (Shenzhen) Co., Ltd. to act as our agent in the preparation of this application for equipment certification. I certify that submitted documents properly describe the device or system for which equipment certification is sought. I also certify that each unit manufactured, imported or marketed, as defined in the FCC or Industry Canadas regulations will have affixed to it a label identical to that submitted for approval with this application. For instances where our authorized agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by TUV Rheinland Group, still resides with Ring LLC / 1523 26th Street, Santa Monica, California 90404, United States For TCB applications, We certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002 (b), to the application is subject to denial of federal benefits, that includes FCC benefits. Thank you, Agency Agreement Expiration Date:

2020/11/20

(Signature) Carro Hsieh

(Print Name) Engineer Telephone

+1 (800) 656-1918 On behalf of

Ring LLC

(Company Name) Page 1 of 1 Revision 0 By Title

QF094234

Confidentiality Letter Date: 17.11.2020 Subject: Confidentiality Request for FCC ID: 2AEUPRBFBA001, IC: 20271-RBFBA001 Pursuant to FCC 47 CRF 0.457(d) and 0.459 and IC RSP-100, Section 10, the applicant requests that a part of the subject FCC/IC application be held confidential. Type of Confidentiality Requested Short Term Short Term Short Term Short Term Short Term Short Term Short Term Short Term Permanent Permanent Permanent Permanent Permanent Permanent Permanent Permanent Exhibit Block Diagrams External Photos Internal Photos Operation Description/Theory of Operation Part List/Tune-Up Procedure Schematics Test Setup Photos Users Manual Ring LLC has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to "competition" would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. Permanent Confidentiality:

The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. Short-Term Confidentiality:

The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of 180 days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Applicant is also aware that they are responsible to notify TUV Rheinland in the event information regarding the product or the product is made available to the public. TUV Rheinland will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-

1705. Sincerely, By:

(Signature/Title) Carro Hsieh

(Print name)