FCC ID: 2AEUPRB19001 Smart Lightbulb

Smart Lightbulb A19 LED Bulb 02_A19_MANUAL.indd 1 10/7/19 4:57 PM Download the Ring app. The app walks you through setting up and managing your Ring A19 bulb. Search for Ring in one of these app stores, or visit:

ring.com/app Download from Windows Store WARNING: Not suitable for use with standard wall dimmers. Verify that the supply voltage is correct. Connect fixture to a 100 VAC~240 VAC 50/60 Hz power source. Suitable for Damp Locations. This device is not intended for use with emergency exit fixtures or emergency lights. Before replacing, turn off power and let the bulb cool to avoid electrical shock or burn. Risk of Electric Shock. Do not attempt to open or disassemble the bulb. Not for use in totally enclosed of recessed fixtures. Suitable for open fixtures only. Dispose of this device in accordance with disposal laws in your area. Not compatible with photo sensors, motion sensors or timers unless specifically designed for Ring Smart Lighting. OPERATING INSTRUCTIONS:

Use the bulb only in a socket rated for this bulb. This device is not a toy designed to be played with by children. Do not place the device on hot surfaces. For safety reasons, do not open devices, which will also void the warranty. 2 02_A19_MANUAL.indd 3 3 10/7/19 4:57 PM Set up your Ring Bridge. Set up your A19 in the Ring app. The Bridge connects your Ring Smart Lights to the Ring app and the rest of your Ring devices. To set up your Bridge, follow the instructions in the Ring app or the Bridge user manual. In the app, tap Set Up a Device. When prompted, select Smart Lighting and follow the in-app instructions. After youve set up your bulb, its time to install it. Turn off the power. Before you continue, make sure you turn off power to the light fixture. 4 02_A19_MANUAL.indd 4-5 5 10/7/19 4:57 PM Remove the old bulb. Turn counterclockwise to remove it from the socket. Install your A19 Smart Lightbulb. Insert the bulb into the socket and turn clockwise. Power it on. Turn the power back on and wait for your bulb to light up. The light must be on to establish a connection with your Bridge. Youre all set!

Once your bulb lights up, its ready to use!

6 02_A19_MANUAL.indd 6-7 7 10/7/19 4:57 PM For additional help, visit: ring.com/help Or give us a call US 1 800 656 1918 Canada 1 855 300 7289 Worldwide +1 310 929 7085 For a list of all our customer support numbers, visit: ring.com/callus 2019 Ring LLC or its affiliates. RING, ALWAYS HOME, and all related logos are trademarks of Ring LLC or its affiliates. 02_A19_MANUAL.indd 8 10/7/19 4:57 PM

60.000 1523 26th St. Santa Monica, CA 90404 Model: Ring Smart Lightbulb (A19) IMPORTANT PRODUCT INFORMATION Safety and Compliance Information 0 0 0

. 0 6 Use Responsibly. Read all instructions and safety information before use. SAFETY INFORMATION FAILURE TO FOLLOW THESE SAFETY INSTRUCTIONS COULD RESULT IN FIRE, ELECTRIC SHOCK, OR OTHER INJURY OR DAMAGE. Small parts may pose choking hazards. Keep device and box contents out of reach of children. Turn off power before inspection, installation, or removal. Ensure that voltage of the bulb is compatible with the mains electricity of your country before connecting to a bulb holder. Do not force bulb base into incompatible bulb holder. Not intended for use in emergency light fixtures or exit signs. Your bulb can withstand outdoor use in an enclosed fixture. However, your bulb is not intended for underwater use where it will be directly exposed to water. To protect against electric shock, do not intentionally submerge or immerse your bulb in water or expose your bulb to other liquids. Do not spill any food or beverages on your bulb. Do not attempt to clean or polish your bulb with or expose your device to oil, lotion, or other abrasive substances. Do not expose your bulb directly to water, or extremely humid conditions (such as a steam room). Do not attempt to dry your bulb with an external heat source, such as a microwave oven or a hair dryer. If your bulb appears to be damaged, discontinue use immediately. Electrical rating: 120VAC, 75mA, 8.5W, 60Hz Operating conditions: -4F to 104F (-20C to 40C) Recycling Your Device Properly In some areas, the disposal of certain electronic devices is regulated. Make sure you dispose of, or recycle, your device in accordance with your local laws and regulations. For information about recycling your device, go to www.amazon.com/devicesupport. For Canadian Customers Innovation, Science and Economic Development Canada (ISED) Compliance This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas license-exempt RSS(s). Operation is subject to the following two conditions:

(1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Conformit Innovation Sciences et Dveloppement conomique Canada (ISDE) Lmetteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme aux CNR dInnovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes : (1) lappareil ne doit pas produire de brouillage, et (2) lutilisateur de lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. Information Regarding Exposure to Radio Frequency Energy:

This equipment complies with IC RSS-102 RF exposure limits set forth for an uncontrolled environment. WARNING: Risk of Electric Shock. Do not attempt to open or disassemble the bulb. Do not use where directly exposed to water. Renseignements relatifs lexposition lnergie des radiofrquences:

Not suitable for use with standard wall dimmers. This device is not intended for use with emergency exit fixtures or emergency lights. Switch off the power supply to the socket and allow sufficient time for the bulb to cool before removing the bulb from fitting. Use the bulb only in a socket rated for this bulb. Dispose of this device in accordance with disposal laws in your area. Not compatible with photo sensors, motion sensors or timers unless specifically designed for Ring Smart Lighting. Product Specifications Model Number: 5AT1S3 Cet quipement est conforme aux limites dexposition IC CNR-102 prvues pour des environnements non contrls. This equipment should be installed and operated with minimum distance 20 cm between the radiator and your body. Cet quipement doit tre install et utilis avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps. CAN ICES-3 (B)/NMB-3(B) Ring_Smart_Lights_legal_Wave2_A19_Bulbs_content.indd 1-2 12/4/19 4:00 PM Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. Use of the product is subject to your registration with Ring and your agreement with the Terms of Service found at www.ring.com/terms To review your warranty coverage, please visit www.ring.com/warranty 2019 Ring LLC or its affiliates. Ring, Always Home, and all related logos are trademarks of Ring LLC or its affiliates. For United States Customers This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The party responsible for FCC compliance is Ring, LLC 1523 26th St Santa Monica, CA 90404 USA For additional help, visit: ring.com/help Or give us a call:

US +1 800 656 1918 Canada +1 855 300 7289 Worldwide +1 310 929 7085 For a list of all our customer support numbers, visit: ring.com/callus Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. Information on this device is on file with the FCC and can be found by inputting the devices FCC ID into the FCC ID Search form available at https://www.fcc.gov/oet/ea/fccid. The output power of the radio technology used in the Products is below the radio frequency exposure limits set by the FCC. Nevertheless, it is advised to use the Products in such a manner that minimizes the potential for human contact during normal operation. This device should be installed and operated with at least 20 cm between the radiator and your body. General NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Ring_Smart_Lights_legal_Wave2_A19_Bulbs_content.indd 3-4 12/4/19 4:00 PM

Sample Agency Request Letter Authority to Act as Agent Date: 28 November 2019 TUV Rheinland Group 762 Park Avenue Youngsville, NC 27596 To Whom It May Concern:

I appoint TUV Rheinland (Shenzhen) Co., Ltd. to act as our agent in the preparation of this application for equipment certification. I certify that submitted documents properly describe the device or system for which equipment certification is sought. I also certify that each unit manufactured, imported or marketed, as defined in the FCC or Industry Canadas regulations will have affixed to it a label identical to that submitted for approval with this application. For instances where our authorized agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by TUV Rheinland Group, still resides with Ring LLC / 1523 26th Street, Santa Monica, California 90404, United States For TCB applications, We certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002 (b), to the application is subject to denial of federal benefits, that includes FCC benefits. Thank you, Agency Agreement Expiration Date:

2020/11/20

(Signature) Carro Hsieh

(Print Name) Engineer Telephone

+1 (800) 656-1918 On behalf of

Ring LLC

(Company Name) Page 1 of 1 Revision 0 By Title

QF094234

Confidentiality Letter Date: 7 January 2020 Subject: Confidentiality Request for FCC ID: 2AEUPRB19001 and IC ID: 20271-RB19001 Pursuant to FCC 47 CRF 0.457(d) and 0.459 and IC RSP-100, Section 10, the applicant requests that a part of the subject FCC/IC application be held confidential. Type of Confidentiality Requested Short Term Short Term Short Term Short Term Short Term Short Term Short Term Short Term Permanent Permanent Permanent Permanent Permanent Permanent Permanent Permanent Exhibit Block Diagrams External Photos Internal Photos Operation Description/Theory of Operation Part List/Tune-Up Procedure Schematics Test Setup Photos Users Manual Ring LLC has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to "competition" would negate the advantage they have achieved by developing this product. Not protecting the details of the design will r esult in financial hardship. Permanent Confidentiality:

The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. Short-Term Confidentiality:

The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of 180 days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Applicant is also aw are that they are responsible to notify TUV Rheinland in the event information regarding the product or the product is made available to the public. TUV Rheinland will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-

1705. Sincerely, By:

(Signature/Title) Carro Hsieh

(Print name)