all | frequencies |
|
exhibits | applications |
---|---|---|---|---|
manual |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
user manual | Users Manual | 2.35 MiB | July 12 2009 | |||
1 | Cover Letter(s) | July 12 2009 | ||||||
1 | ID Label/Location Info | July 12 2009 | ||||||
1 | Internal Photos | July 12 2009 | ||||||
1 | Cover Letter(s) | July 12 2009 | ||||||
1 | Test Report | July 12 2009 | ||||||
1 | External Photos | July 12 2009 | ||||||
1 | Test Setup Photos | July 12 2009 |
1 | user manual | Users Manual | 2.35 MiB | July 12 2009 |
RB-F900 User Manual Fingerprint System 1 Ver 1.1 User Guide Thank you for Using RingBell F-900. This manual can be change anytime without notice and also can be miss print or spelling error. Copyright Ring Bell Co., Ltd 2009 All rights reserved. This manual have copy right. Manual cannot be reproduction or copy without permission. 2 Section 1 Introduction 1-1 Confirm contents ---------------------------------------- -4 1-2 Install place----------------------------------------------- -5 1-3 Parts name------------------------------------------------ -7 1-4 RB-F900 Sepcification---------------------------------- -9 1-5 RB-F900 summary --------------------------------------10 3 Introduction 1-1 Confirm contents RB-F900 Adaptor Holder/Screw Software Program CD/ Manual Contents can be change without notice. 4 1-2 Install place To get best specification for RB-F900, please install in safe place suggest below. Warning Careful when unpack RB-F900. LCD screen is on the surface. Please Keep RB-F900 in package when you carrying long time trip.. Please check contents and call Ringbell if anything is not included. Select install place Please get enough place to install RB-F900. About Install place Please select safety place to install to get the best specification for RB-F900.
(RB-F900 can be effect noise from TV, Radio, Telephone )
. Avoid high temperature & moisture Please advise install condition below.. Please avoid stove, heater, air condition. 5 Avoid radical temperature changes Please avoid radical temperature change place. Radical temperature change can make dew inside RB-F900. Avoid electromagnetic (radio, TV, microwave). Please avoid electromagnetic noise from RB-F900. Can be have trouble shooting with RF card and interphone. Keep out of sun. Please avoid sun, our solution is optical method, so sun can cause delay authorization. Vertical and steady Install vertical way and steady place, not shaken. 6 1-3 Parts name Front side 1. LCD (3.5) color TFT screen 2. Fingerprint scanner 3. RF Card scanner 4. Key button 7 Back side 1. Slide Holder 2. MIC authorize sticker 3. Please see Pg.38 for terminal connection 8 1-4 RB-F900 Specification RB-F900 Specification is below. Model Name RB-F900 CPU LCD Key Communication Fingerprint r/g Log data ARM9 2440, 32Bits, 400Mhz, (128+64)MB Memory 3.5 inch COLOR TFT LCD Graphic display 0,1,2,3,4,5,6,7,8,9,</*,#/>,CANCEL,ENTER,SETUP,F1,F2,F3,F4 Host[com1] : comm.[RS-485], TCP/IP, WIEGEND Max 10,000 person registration Max 1,000,000 data LAN Convertor Built in TCP/IP LAN Convertor RF-ID Voice Built in RF-ID Module Temic 125Khz Message : 2 language Operating time Card reading : 30ms [13.56Mhz] Verification : Less than 0.3 sec Operating Temp Fingerprint Module: -20 to+65 RF Reader: -35 to +60
, LCD: -20 to +70 Operating humidity 10% to 90% relative humidity non-condensing Power Dimension 12V / 600 mA 160 mm[W] * 140 mm[L] * 35 mm[H]
This specification can be upgrade without further notice. 9 1-5 RB-F900 Summary 1. Summary Ringbell RB-F900 is link with Internet & Intranet Computing. Cannot be authorize by some else. All fingerprint and RF card data will convert to digital data and save in our database in RB-F900 and user PC. RB-F900 has three ways to authorize user (Fingerprint, RF card, Password) to link to security panel RB-3010, RB-3020 for security system. RB-F900 can be use as employee time management system & payroll system. 2. Special feature 1) Smart authorize speed Using 32bit ARM9 to speed up process and provide stable authorization. 0.3 sec. to authorize user fingerprint 2) Dimension System formation Using RS485 communicate up to 1.2Km length data and link up to 32 units. Also have TCP/IP communication to secure and steady data communication. 3) High volume of fingerprint and log data Up to 100,000 fingerprint and 2million data can save in flash memory. 4) Smart authorize system Basic 1:N authorization system can register up to 8000 people and search 3 deferent fingerprint in 1 second. Compare up to 45 deferent point of fingerprint. 0% of miss authorize. 5) DATA storage ability and expanse. User register 10,000, Event Data 1,000,000 same time disposal. Using FLASH MEMORY to protect losing data. 6) Remote operation ability Using software to monitoring real time door status and search users status on / off line. 7) Multi user ability 3.5 inch COLOR TFT LCD Graphic display to show clear Message, LCD Back-Light can be easy to use at night. Using Key, Card + Password, Password user and RF-ID card user select. 8) Variety application range RB-F900 has variety application like Time management & Access control. 10 Section 2 Technical guide 2-1 Employee time management --------------------------12 2-1-1 Function button guide----------------------------------------12 2-1-2 In/Out & Clock In/Out mode -------------------------------13 2-2 System mode entry --------------------------------------13 2-3 System setup----------------------------------------------14 2-3-1 General setting-------------------------------------------------14 2-3-2 Time & Date setting ------------------------------------------15 2-3-3 Operation setting----------------------------------------------15 2-3-4 Time manage setting------------------------------------------16 2-4 Network setup--------------------------------------------17 2-4-1 TCP/IP Setting-------------------------------------------------18 2-4-2 RS-485 Setting -------------------------------------------------18 2-4-3 Network address & error confirm-------------------------19 2-5 Device setup ----------------------------------------------21 2-5-1 Fingerprint Authoize -----------------------------------------22 2-5-2 Input setting----------------------------------------------------23 2-5-3 RF Card setting------------------------------------------------23 2-5-4 Gate setting-----------------------------------------------------24 2-6 User setup-------------------------------------------------24 2-6-1 User Register setting------------------------------------------24 2-6-2 User modify setting -------------------------------------------26 2-6-3 Delete single user setting-------------------------------------27 2-6-4 Delete entire user setting-------------------------------------28 2-7 Screen & Sound setup ----------------------------------28 2-8 Log data management----------------------------------29 2-9 Authoization explanation ------------------------------30 11 Technical Guide Employ time manage mode. (Please refer below) 2-1 In/Out & Clock In/Out Mode
<In/Out & Clock In/Out Mode screen>
Icon will show when communicate with PC and RB-F900 (See capture image above) 1) 2) Door delay activate icon ( Close / Open ) 3) LAN communication link icon ( See capture image above ) If icon show ( X mark ) LAN disconnected 4) Time management mode option screen ( press button to change ability ) 5) Month, date / time line ( exclude by option ) Operation cancel / Preview menu Enter, Ok, Save System set up / Security mode CANCEL ENTER 2-1-1 Function button guide SETUP F1 F3
Clock In / Reregister fingerprint Going Out / Upper Key / Reset Left Key / Delete # / Security system input mode Right Key / Security system input mode F2 F4 Clock out / Reregister card Return / Down Key / Initialize /
User picture modify 12
< Clock Out mode >
< Clock In mode>
< In/Out mode >
2-1-2 In/Out & Time management Press menu you want to use F1~F4. Press to change In/Out mode from Time manage mode You can also set the system to automatically change to In/Out mode from Time manage mode. 2-2 System mode entry Press Setup Button Admin have to have a password to approach system setup to modify settings. If password is failure then RB-F900 will say massage that you cannot access. Initialize password 0000
< Going out >
< Return >
CANCEL SETUP Input PasswordEN Then press TER 13 2-3 System setup 2-3-1 General setting Register System ID and Password Multi reader have ID number for multi RB-F900 to use in one place. Password is access to system setting mode so please be aware not to forget. Select system then press in setting mode icon ENTER menu ENTER ENTER Help Press at general. After setting is done, return to main Direction menu ( F3 : up / F4 :down ) System ID : 1 / password : 0000 When you change ID/PW press 14 2-3-2 Time & Date Set up Setup system Time & Date. In/Out and Time manage system need exact time and date. EX> Date : 2009 yr 10 mo 23 day ( 20091023) / Time: PM 04:57:37 ( 165737 ) Select Date/Time then press 2-3-3 Operation setting ENTER Input exact Time & Date then press ENTER Entire device authorize setting 1) 1:1 Operation -> Multi way to authorize setting Sort : (Card) , (ID/Card+Fingerprint) , (ID/Card+PW) , (ID/Card+Fingerprint/PW) ,
(ID/Card+Fingerprint+PW) Description : EX) (ID/Card+Fingerprint) = Input ID and scan RF card then scan fingerprint. 2) 1:N Operation -> Only Operate with Fingerprint Sort : (Touch) , (Function Key) , (Touch/ Function Key) , (Not use) Description : EX) (Touch) = Using touch sensor behind fingerprint scanner
(Function Key) = Press F1~F4 Key then fingerprint
(Not use) = Not using fingerprint Select Operation menu then press Using F3 & F4 to up and down to change setting then press ENTER ENTER Return to Main menu after setting. 15 2-3-4 Time manage setting Multi Time manage mode setting. 1. Mode description A) Manual mode : Time manage mode will be stay until press Cancel button to return to In/Out mode.
(Clock In/Clock Out/Going Out/ Return) B) Time manage mode : To manage employee time track, use Time manage function key. C) Automatically : Set the time to change functions automatically Clock In / Clock Out / Going Out / Return. D) Fix mode : Set the function fixed in Clock In / Clock Out/ Going Out / Return E) Not use : Not using Time manage mode just using In/Out mode 2. Event Description A) Sort : Clock In / Clock Out / Going Out / Return B) Time : Always apply/Not use (Using software to set the specify time) C) Door Open : Use/Not use (Analysis event to open door or not ) 3. Fix description RB-F900 exclusive when its fix mode (apply to Clock In/Clock Out/Going Out/Return mode) Select Time manage then press
< Time manage >
< Automatically >
< Fix >
< Manual >
< Not Use >
ENTER Return to Main menu after setting. 16 2-4 Network setup RB-F900 has 2 ways to communicate with PC software. 1) TCP/IP Method: Ethernet 802.3 protocol to using TCP/IP address 2) RS485 Method: Connect parallel between RB-F900 and Computer
* Using TCP/IP communication is more steady and safe communication method. 2-4-1 TCP/IP setting 1) Port : To connect PC software, set the peculiar port ( device have to have a peculiar port when there are many IP address sharing in one network. Be careful not to put duplicate port in router for outside remote connection.) 2) Maximum connect : ( 1 / 4 / 6 / 8 / 16 / Unlimited ) -> same time connection with PC software setting. 3) DHCP : ( use / not use ) -> IP automatic assign setting Set the peculiar IP for RB-F900. (When manually input IP, set the IP out of auto assign IP from router /
cause IP crash in hence) 4) IP address : Input IP address ( Regularly router have 192.168.0 or 192.168.10 duty IP ). Please be ware not to input other PC or devices IP address. 5) Gateway : Input GATWAY address If its in the same network, Gateway have to be same as PCs Gateway. Router IP or Network IP is Gateway. 6) Subnet Mask : Input SUBNET MASK IP If its in the same network, Subnet Mask IP have to be same as PCs Subnet Mask IP. 7) MAC address : Mac address is Network communication in OSI 2LAYER. It has own Mac address, but if devices have duplicate Mac address, then network will be crash between devices.
* Warning. When input IP address in new device, use left key </* to delete, and tuse right key #/> to input next IP address number. 2-4-2 RS-485 setting 1) PC : Set the same communication speed as PC communication speed.
(4800 / 9600/ 19200/ 38400/ 57600/ 115200/ not use) 17 2-4-3 Network address & Error 1) To find out what IP address PC are using 2) To Install Time management PC software, use same IP address range in same network 3) Start->Run (Type CMD then ENTER)-> DOS prompt screen ( type ipconfig then ENTER) Window -> Run ->CMD Run : Type CMD then ENTER When Dos Prompt screen shows above, type ipconfig then ENTER
* ipconfig : Verification of PC IP, Gateway, Subnet Mask 192.168.0 Network range Gateway Router IP Orderly IP / Subnet Mask / Gateway will show. If you install device in same network, input subnet mask and gateway then setup automatically or manually input RB-
F900 IP address. 18 160 is RB-F900 IP RB-F900 and PC communication Status which is steady. Input RB-F900 IP, SUBNETMASK, GATEWAY, Input TCP/IP Port and check the status Start->Run(Type CMD then ENTER)-> Dos prompt screen ping 192.168.0.(RB-F900 IP) t <EX : ping 192.168.0.160 t Enter >
Orderly IP / Subnet Mask / Gateway confirm. If you install device in same network, input subnet mask and gateway then setup automatically or manually input RB-
F900 IP address. RB-F900 and PC communication is fail If CMD shows Request timed out, please check the list below. 1) RB-F900 IP , Gateway, Subnet Mask 2) Duplicate IP 3) LAN Cable check (Most router accept cross cable but basic specification is 1:1) 4) Check the Link LED on router or hub 5) RB-F900 LAN port check
* ping description : To check steady communication IP in TCP/IP 19 IP 192.168.0.160 have 00-e0-4c-00-92-22 Mac address To mapping RB-F900 IP & MAC ADDRES. Start->Run(Type CMD then ENTER)-> Dos Prompt screen Type arp a ->
* arp description : Most network device have Mac address, check IP and Mac address status. TCP/IP Select Network then press ENTER Select TCP/IP then press Input Info then press ENTER ENTER Return to main menu after setting. 20 Return to the Main menu after setting. RS-485 Select RS-485 then press 2-5 Device setup Setup hardware device / Setup device reboot and initialize 2-5-1 Fingerprint authoize ENTER ENTER Input speed correctly then 1) Security level : set the security level for fingerprint authorization.
( low / middle / high ) 3 kind of level and initialize setting is middle.
* Low : High authorization, but that can cause duplicate fingerprint authorize Middle : When register fingerprint level is middle High : High secure and elaborate to authorize fingerprint 2) Display Fingerprint : Display Fingerprint on the screen
* Display : Display fingerprint when scan finger Hide : Hide fingerprint when scan finger 3) Fingerprint Delay Time : Setup Delay time when scan fingerprint( 1~20 sec. )
* After delay time voice message will comes out Please scan fingerprint correctly. Display Select Device then press ENTER 21 Setup system the press Return to Main menu after setting. ENTER 1) When case open : Alarm will activate when the device case open enforce. Select Fingerprint Authorize then press 2-5-2 Input setting ENTER
* Alarm : Case open signal apperance Device Lock : Lock the all the system Not Use : Not use ENTER Select Input then press 2-5-3 RF Card setting ENTER 1) Kind : Select RF Card type
* 125Khz : Temic / EM Card Select RF card then press ENTER Input information then press Return to Main Menu after setting. System setup then press ENTER Return to main menu after setting. 22 2-5-4 Gate setting 1) Door Open event : Decide In/Out or Time manage event
* Authorize : In/Out data Time manage : Clock In/Clock Out/Going Out/Return Authorize + Time manage : In & Out/Clock In/Clock Out/Going Out/Return data open door Every event : Clock In/Clock Out/Going Out/Return Data Not use : Door keep close when authorize. 2) Door Close Time : Setup door close time in PC software
* Always use : Apply door time Not use : Not use 3) Door Open Time : Setup door open time in PC software
* Always use : Apply door time Not use : Not use 4) Setup Door Lock Time : Setup door lock time ( When system setup EX : 3 Lock will activate in 3 sec. ) A) Door Open Alarm : After setup time alarm will activate Setup system then press ENTER Return to main menu after setting. ENTER Select door then press Help Press F3 then ENTER to Restart F3 : Restart system F4 : Initialize system Press F4 then ENTER to Initialize 23 2-6 User setup Setup User Fingerprint, Card, Password Register/Modify/Delete/Entire Delete. 2-6-1 User register setting 1) User ID : Use direction key to input User ID , automatically register no.1 then no.2 method. 2) Level : Admin and User level setup
* User : Cannot access initialize mode and cannot delete data Admin : Can access to any of system 3) Password : User password input / (Dont need password to register) 4) Number of scan fingerprint : Setup how many times to scan fingerprint when register.
* 1~5 / Not use ( User do not have to have a fingerprint to register ) After setup you can also change setting at Modify. Then Reregister user fingerprint. Not use screen below 5) Card : Setup card type when register
* Use : RF Card use setup Not use : Not use RF Card
( When use fingerprint and card, Card Register first . ) 6) Input Mode : Card auto Input / Manual Input / Input User ID.
* Read card : Automatically read card Manual Input : Input card data without instead of reading card User ID : Use card ID instead of User ID 7) Card ID : Show register User card data (4Byte = 10 digit) 24 User ID(1) / Not use password / Fingerprint scan (3) / Card use / Auto Reader Select User then press ENTER Scan RF Card on the scanner on the RB-F900. Select register press ENTER Input information then press ENTER Scan fingerprint when screen show above. Automatically save 3 fingerprint When scan first fingerprint. Automatically save 3 fingerprint when scan third fingerprint. register fingerprint, system After automatically return to user register menu for next register Press Cancel button to return to main menu Automatically save 3 fingerprint When scan second fingerprint. Help 1) When register fingerprint and card at same time, Card register first 2) When register fingerprint, [1/3] , [2/3], [3/3] save fingerprint. While scan fingerprint, please avoid movement of fingerprint that can cause failure of fingerprint. 25 3)
[0] None registered User First User register, menu is only activate for Register.
[1] 1 Registered User After User registered, the menu will activate. 2-6-2 User modify setting Modify every User Fingerprint , Card , Password , Card Use or Not Use , Card number. 1) User ID : Input User ID , use direction key to input manually ( type ID then ENTER ) 2) Level : User and Admin modify setting
* User : Register as user level Admin : Register as Admin, access to all level 3) Password : User authorize password input / (Register User without password) 4) Number of Fingerprint : Setup how many times scan fingerprint when register. Modify User fingerprint, rescan from first fingerprint. When reregister fingerprint, press <F1> Button to reregister. 5) Card : Setup Card Use/Not use
* Use : Use RF Card Not Use : Not use RF Card Press <F2> Button to Reregister Card. 6) Input method : Setup Auto Card Input / Manual Input / Modify User ID Input.
* Read Card : Automatically read card to register Manual Input : Manually input card data to register User ID : Set User ID to Card ID 7) Card ID : Show Card data (4Byte = 10 digits) 26 Select Modify then press ENTER Select ID then press F4: Check register Picture ENTER Re registration:
F1 (fingerprint), ,F2 (ID) Press F1 button to add fingerprint or reregister. After register, return to next register menu. Register next user or press CANCEL button to end register menu. Press F2 button to add card or Reregister. Help F1 : Modify Fingerprint F2 : Modify Card 2-6-3 Delete single user setting Delete User ID F4 : Check register Picture. If Picture hasnt been register message will show. Select delete menu then press ENTER Select ID then press ENTER Confirm delete then press ENTER 27 2-6-4 Delete entire user setting Entire User ID delete Select Entire delete then press ENTER Confirm delete then press ENTER 2-7 Screen & Sound setup Select Language / Main screen information / Input wait time / Message wait time / Volume 1) Language : Korean / English ( System will reboot after change language ) 2) Screen : Multimedia / Logo / Slide Show / Notice 3) Information Below : Date/Time, Not use (Show Date/Time Main screen below.) Setting Confirm message Change to English then press ENTER System Reboot confirm, press to reboot system. ENTER Date/Time Not use Date/Time Use 28 4) Input time out : <10~30 sec. , Unlimited> Return to Main menu after delay time is over. 5) Message Time : <1~5 sec.> Set message time ( Authorize time , Failure ) 6) Volume : <10~100% , Mute>
Select Screen/Sound then press ENTER Input information the press ENTER Return to main menu after setting. 2-8 Log data management Show System Log ( System Start , Authorize record, register and delete log data ) Select Log menu then press ENTER Help System log confirm and delete Log data. Press F4 button to erase. Confirm Delete the press ENTER Press F4 button to delete log data 29 2-9 Authorization explanation Fingerprint , ID & Password , RF Card method to authorize User. F1 Clock In, F2 Clock Out, F3 Going Out, F4 Return Use F1~F4 button to change to Time manage. CANCEL button to In/Out mode sw 2-9-1 Fingerprint authorization 1) In/Out Fingerprint authorize Press CANCEL button to change In/Out mode then scan Fingerprint. 2) Clock In fingerprint authorize Press F1 button to change Clock In mode then scan fingerprint. Wait until Fingerprint show on the screen. Authorization success. Wait until screen show Fingerprint on the screen. Clock In authorize Success. 30 3) Clock Out authorize Press F2 button to change to Clock out mode then scan Fingerprint. 4) Going Out authorize Press F3 button to change to Going Out mode then scan Fingerprint. 5) Return authorize Press F4 button to change to Return mode the scan Fingerprint. Wait until fingerprint show on the screen. Clock Out authorize success. Wait until fingerprint show on the screen. Going Out authorize success. Wait until fingerprint show on the screen. Return authorize success. 31 6) ID & Password authorize Use numeric key number to Input ID Input ID use numeric key.
(Press ENTER after Input ID) Input ID, then press ENTER
(Before input password) Input ID then press ENTER
(Input password then press ENTER) Authorization success. 7) RF Card authorize Scan RF Card close to machine. Use F1~F4 button to change mode. Employee Name Card TYPE Key tag Type 32 8) User Info Screen User ID and picture will show when authorize. Modify User Information in PC software then transfer to RB-F900. User Picture 9) Failure screen when authorize Fingerprint authorize failure Password failure Fingerprint scan wait time over. Not register card screen User do not have password Not register ID 33 Section 3 System Analysis and Install 3-1 System Analysis------------------------------------------35 3-1-1 Network connection--------------------------------------------------- -35 3-1-2 RS-485 1:N connection ----------------------------------------------- -35 3-1-3 RS-485 1:1 connection------------------------------------------------ -36 3-1-4 Single connection------------------------------------------------------ -36 3-2 System Install --------------------------------------------37 3-2-1 Installation advice----------------------------------------------------- -37 3-2-2 Holder Install ---------------------------------------------------------- -37 3-2-3 Terminal connection-------------------------------------------------- -38 3-2-4 Hold RB-F900---------------------------------------------------------- -39 3-2-5 Ehernet connection (cable) ------------------------------------------ -40 3-3 Correct Authorization----------------------------------41 34 RFP-407 RFP-407 RFP-407 Admin PC Exit Button LAN / INTERNET 3-1 System Analysis 3-1-1 Network connection Network connection is connect multi RB-F900 thru Internet (TCP/IP Internet). 3-1-2 RS-485 1:N Connection 1:N connection is use RS-485 interface to connect multi RB-F900 to PC. Specification communication length is 1.2Km and maximum connect is 16. PC do not have RS-485 terminal so use RS-232C convertor. RS-232 C < -> RS-485 Admin PC RFP-407 RFP-407 RFP-407 Door Lock RS -485 Converter Exit Button Door Lock 35 Door Lock convertor Admin PC RFP-407 3-1-3 RS-485 1:1 Connection 1:1 connection is using RS-485 interface to connect admin PC and RB-F900. Communication maximum length is 1.2Km. 3-1-4 Single connection Stand alone RB-F900 without admin PC. Door Lock EXIT Exit Button RFP-407 36 3-2 System Install 3-2-1 Installation advice Please advice RB-F900 installation guide below. RB-F900. 1) Please avoid direct sun. Sun can cause problem with scan fingerprint. 2) High temperature, water, and dust also can cause scanner of fingerprint. 3) Please beware of install holder of RB-F900, it have to be open in any ways. 4) Avoid noise from other device. Please keep away from radio, microwave and TV. 3-2-2 Holder Install Install holder against RB-F900 to the wall. See picture below. When there is whole on the wall. Fix screw on the wall
(3point) 37 3-2-3 Terminal connection There is cable with RB-F900 when delivery from factory, connect correct cable to terminal referral below. USB RJ-45 LAN Connector Power ON/OFF 12V Power Adaptor Connect to Com Port from LOCK terminal Magnetic Sensor
Lock + -> LOCK terminal NO Lock - -> Sensor terminal GND Door Lock Magnetic -> GND EXIT button -> Sensor GND Sensor terminal EXIT
* Sensor terminal +12V & LOCK terminal COM
* Connect Door / GND when using different door sensor. Door Port Door Port Sensor terminal +12V Port RS-485 convertor connect with PC RB-3010 Power / Communication RX,TX 38 SENSOR
( +12V)
(Door Input)
(EXIT )
(GND)
(WEIGAND +)
(WEIGAND -) LOCK NC NO COM RS-485 485 RX 485 TX COM RB-3010 (Main)
+12V GND RB-3010 TX RB-3010 RX 3-2-4 Hold RB-F900 After all the wire connection is complete, please slide RB-F900 to the Holder carefully. Please beware of disconnect wire when slide in. After fit in to the holder, use two screw to lock the RB-F900 and holder together. Screw (2 POINT) When wire going thru left, right, below, please cut red dot above the picture. 39 Cable 1 W/Orange 2 Orange 3 W/Green 4 Blue 5 W/Blue 6 Green 7 W/Brown 8 Brown 1 2 3-2-5 Ethernet connection (LAN) Communication connection can be different by communication method, so please advise correct communication method. System analysis Network connection 1:N Connection Single connection Interface (Max. Length) TCP/IP (100M) RS-485(1.2KM) None Connector RJ45 TCP/IP Connect RJ45 Plug to UTP cable to Main socket terminal (J5). Cable example below is referral to EIA/TIA-568B (Standard). RJ-45 Connection Pin Number 1 2 3 4 5 6 7 8 Pin Name Tx+
Tx-
Rx+
Rx-
Description Transmit+
Transmit1 Receive+
Not Used Not Used Receive-
Not Used Not Used Cable Specification 1. 2 different group solid and strip in 8 lines. 2. 1,2,3,6 line is for LAN communication. Orange, Green, Blue, Brown Sequence but change solid line 4, 6. Communicate line is orange and green. 7 8 40 3 4 5 6 Installation Notice for UTP cable Most network problem is UTP cable, so please beware of wire UTP cable. a) Please follow EIA/TIA-568 method. It can cause disconnection if connection method is wrong. EIA/TIA-568B : PC(NIC) - HUB (Direct Cable) EIA/TIA-568A : HUB - HUB, PC - PC (Crossover Cable) 568A connection : Change 1&3 and 2&6 in 568B method. b) Use CAT 5(Category 5) or above level of UTP cable. c) Minimum let the cable length 13mm, so cable is not twist (CAT 5). d) Please keep cable length under 100M.
<Router or hub from RB-F900>. e) Do not twist cable over 90 degree. f) Please avoid power(motor) or power cable, EMI noise can cause wire problem. 3-3 Correct Authorization Prism scanner : scan fingerprint prism Touch sensor : Red LED will splash when touch sensor detect finger. It is depends on user, but usually put finger all the way up to the scanner. Calculate Fingerprint core from middle fingerprint. 41 OK !!
Failure !!
Please put finger all the way up to the scanner. When finger is not the property place. Keep middle core in the center Can not scan middle core 42 Manufacture Warranty Not using intimacy fixture. Rebuild, repair, manufacture from other factory except RingBell Fire, lightning damage, earthquake, flood or nature disaster Intentional mistake from user We have factory warranty for RB-F900 detail below. 1. Warranty Period Warranty period is 1 year from delivery. 2. Fixture Fixture is not cover by warranty, Fixture have to be paid by customer. 3. Intimacy Please use Intimacy fixture we supply, other fixture can cause trouble. So please contact RingBell to buy Intimacy fixture. 4. A/S Parts We offer period time to A/S if delivered product is castrate. 5. A/S Every products under a warranty period, after service is no charge. 6. Responsibility Not cover under warranty list below. FCC approved Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generated, uses instructions, may cause harmful interference to radio communications. However there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures. Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help 7. Out Of Warranty Out of warranty RingBell invoice after service charge by situation. 43 RingBell co,.Ltd. 239-7 Seukchondong, Songpagu, Seoul Customer Service
(02) 2202-6180 / Fax (02) 2202-6184 http://www.ringbell.co.kr 44
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2009-12-07 | 0.125 ~ 0.125 | DCD - Part 15 Low Power Transmitter Below 1705 kHz | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2009-12-07
|
||||
1 | Applicant's complete, legal business name |
Ring Bell
|
||||
1 | FCC Registration Number (FRN) |
0019324565
|
||||
1 | Physical Address |
239-7, Seokchon-dong, Songpa-gu
|
||||
1 |
Seoul
|
|||||
1 |
South Korea
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
m******@ccsemc.com
|
||||
1 | TCB Scope |
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
XXI
|
||||
1 | Equipment Product Code |
RBF900
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
Y****** L******
|
||||
1 | Telephone Number |
82-2-********
|
||||
1 | Fax Number |
82-2-********
|
||||
1 |
l******@hanmail.net
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | DCD - Part 15 Low Power Transmitter Below 1705 kHz | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Fingerprint System (RFID) | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
EMC Compliance Ltd.
|
||||
1 | Name |
H**** Y********
|
||||
1 | Telephone Number |
82-31********
|
||||
1 | Fax Number |
82-31********
|
||||
1 |
y******@emc2000.co.kr
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | 0.12500000 | 0.12500000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC