BOX CONTENTS RAYBABYTM IS INSTALLED VIA THE MOBILE APP. PLEASE DOWNLOAD THE RAYBABYTM APP FROM GOOGLE PLAY STORE FOR ANDROID APP AND FROM APPLE STORE FOR iOS APP. SET-UP INSTRUCTIONS:
1. Gently insert the DC connector pin of the adapter to the device as shown in the Figure 02. Figure 02: DC Power Connector 2. Plug in the adapter to the power outlet. 3. Place the monitor on the side table or a higher surface so that the camera of the monitor is in line with the baby. WARNING: Please ensure that the monitor is not in or on the crib. Also ensure that all the wires are tucked away safely to prevent any strangulation hazard or accidents. 4. Download the RaybabyTM app from Google Play Store or iOS App Store. 5. Switch on the power to the adapter and wait for one minute to allow the device to be powered. 6. Sign up to the app with your Facebook/Google account. 7. Next enter your babys information as shown in Figure 04. Figure 03: Sign In to the Raybaby App Figure 04: Baby Information 8. Once you enter the babys details, you need to scan for the Raybaby device. Click Scan for Device. The app starts to search for a Raybaby device (Figure 05). There are two outcomes possible from the scan (Figure 06, 07). Note: If device is not found, refer to the troubleshooting guide. Once the devices are found, select the Raybaby device from the list of devices.
(Typically the device ID will have Raybaby followed by some numbers.) Figure 06: Device Not Found Figure 07: Device Found After the Raybaby device is connected, the device and mobile app need to be integrated with the Wi-Fi. Ensure that your Wi-Fi username, password is handy. 9. Click Connect to Wi-Fi, enter the Wi-Fi username and password and Confirm. 10. Once the Wi-Fi is detected, click on Start to begin streaming the live data from your Raybaby device. (Figure 08) Note: If device is not found, refer to the troubleshooting guide. Figure 08: Live streaming from Raybaby device NOTE:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/ TV technician for help. This equipment may only be operated indoors. Operation outdoors is in violation of 47 U.S.C. 301 and could subject the operator to serious legal penalties. Any changes or modifications not expressly approved by the party responsible for compliance could void the authority to operate equipment. This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. For product available in the USA market, only channel 1~11 can be operated. Selection of other channels is not possible. Moblile Device This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.