FCC ID: A4C01001A 802.11b,g MODULE

TM TND 760 Fleet Edition Users Guide Support This guide is organized to help you effi ciently accomplish all your work-related tasks. However, if you have questions that are not addressed here, we invite you to contact us. Call us: 1-800-641-RAND (7263) E-mail us: eetsupport@randmcnally.com Write to us:

Rand McNally Attn: TND 760 Fleet Edition Customer Support 106 Hi-Lane Richmond, KY 40475 Safe Driving Practices:

Always use your best judgment, exercise caution and common sense when the vehicle is in motion. Do not become distracted by the device while driving. Minimize the amount of time spent looking at the device while driving and use voice prompts when possible. Do not input destinations, change settings, or access any functions requiring prolonged use of the device controls while driving. Pull over in a safe and legal manner before attempting such operations. FCC Compliance Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. FCC WARNING This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and the receiver. Connect the equipment into an outlet different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Exposure to Radio Frequency Radiation. The TND 760 device transmits and receives radio frequency (RF) energy through its internal antennas. The TND 760 cellular antenna is located at the top of the left edge of the device. The Wi-Fi antenna is located near the center of the bottom edge of the device. The TND 760 is designed to operate with internal antennas and has no provisions for external antennas. The TND 760 has been designed, tested and manufactured to comply with the limits for exposure to RF energy set by the FCC. The radiated output power of the TND 760 device is below the FCC radio frequency exposure limits. The FCC has granted an Equipment Authorization for this model device with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR information on this model device is on file with the FCC and can be found under the Display Grant section of http://www.fcc.gov/oet/fccid after searching on FCC ID: A4C 01001A FCC Caution Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate this equipment. Table of Contents Welcome to Your Rand McNally TND 760 Fleet Edition ........................2 Device Overview......................................................................................3 Getting Started .......................................................................................4 System Registration ..............................................................................4 Power On .............................................................................................5 Log On ................................................................................................5 Warning Screen ....................................................................................6 On-Screen Keyboard .............................................................................7 Status Bar ............................................................................................8 Screen Calibration ................................................................................9 TND 760 Menu ...........................................................................10 Menu Safe-driving Screen ...................................................................11 TND 760 Mail .............................................................................12 Inbox .................................................................................................13 Open Message ...................................................................................14 Outbox ...............................................................................................15 Send ..................................................................................................16 Options ..............................................................................................17 Mail Safe-driving Screen .....................................................................17 TND 760 IntelliRoute ...............................................................18 Main Menu ........................................................................................18 Truck Info ...........................................................................................19 Route and Device Options ............................................................ 19-20 Warnings ...........................................................................................20 Route to Destination .................................................................... 21-22 POIs ...................................................................................................23 Timers and Trails ........................................................................... 23-25 TND 760 Hours of Service .........................................................26 Summary ...................................................................................... 27-28 Duty Status ................................................................................... 29-31 Logs ............................................................................................ 32-36 DVIR ............................................................................................ 37-40 Options ........................................................................................ 41-43 Company ............................................................................................44 HOS Safe-driving Screen .....................................................................45 TND 760 Stats ............................................................................46 Driver Performance .............................................................................47 Fault Codes ........................................................................................48 TND 760 SysInfo ........................................................................49 Settings Tab ........................................................................................50 Info Tab ..............................................................................................50 Diagnostics .........................................................................................51 SysInfo Safe-driving Screen .................................................................52 Welcome to Your Rand McNally TNDTM 760 Fleet Edition Easy. Convenient. Accurate. Flexible. Responsive. The Rand McNally TND 760 Fleet Edition is designed to improve your work life. 1. Easy. The format, the applications and the processes are easy to understand and easy to use. Safe-driving screens simplify tasks you may need to perform while driving. 2. Convenient. From Log on to Log off, every task you need to perform has touch-screen convenience. From start to fi nish, instructions are clear and intuitive. 3. Accurate. HOS logs are recorded with accurate-to-the-second technology. 4. Flexible. Tools are built into the system to allow you to manage several applications simultaneously. 5. Responsive. Buttons fi t your fi ngers so managing the touch screen is comfortable. Going back a step is as easy as going forward so you can quickly arrive at where you want to be in the system. 2 TND 760 Fleet Edition Users Guide Front of Display Power Button Back of Display USB Use the USB to connect a keyboard or mouse to your TNDTM 760. Home Button Press to return to Home Menu screen. LED Light Lights up when unit is powered on. Speaker Power and OBD Access Device Overview Mounting Bracket

(with (3) 10-32 x 3/8 screws) Support Plate

(with (4) 10-24 x 1screws and (4) 10-24 nuts) Power and OBD Cable Dash Mount To adjust the position of the mount, turn the mount knob to loosen tension. TND 760 Fleet Edition Users Guide 3 Getting Started TND 760 Fleet Edition System Registration Register TND 760 Fleet Edition. Once system is installed and powered on, the Registration screen should display. Enter your truck number in the Truck # fi eld and tap Register. System Registration The fi rst time you power up your TND 760, you will need to register your unit. Send test message. Select the Mail icon on the Home Menu and tap Send. Type message subject and message text and tap Send in the upper left hand corner. Make sure message indicator changes from X to a green check mark. Verify GPS. Select the SysInfo icon on the Home Menu. Select Diagnostics, then the GPS tab. Verify GPS status is good and that there are values in the Latitude and Longitude fi elds. Verify J1708/1939 data. Drive the truck at least .2 miles. Select the SysInfo icon on the Home Menu. Select the Diagnostics, then the J-Bus tab. Verify that there is an odom-

eter value in the Engine Odometer fi eld. Then go back to the menu and select the Stats icon, then the Driver Performance tab. Verify there is a value in the Engine Odometer eld on the second line in the fi rst column. 4 TND 760 Fleet Edition Users Guide Exhibit 1. TND 760 Power Button Power On Press the Power button on the top right of the TND 760 display. Getting Started Log On The start-up screen for the TNDTM 760 Fleet Edition displays a log on pop-up [Exhibit 2, (a)] and the on-screen keyboard

[Exhibit 2, (b)]. Use the on-screen keyboard to enter your Driver ID

(assigned by your company). Tap Submit [Exhibit 2, (c)]. NOTE: To log off your TNDTM 760, select the Logoff icon

, select the Logoff icon on the menu. Exhibit 2. TND 760 Log On Screen

(a)

(b)

(c) TND 760 Fleet Edition Users Guide 5 Getting Started Exhibit 3. Warning Screen Warning Screen The Warning Screen [Exhibit 3] reminds you that using your TNDTM 760 while driving can be distracting. Be cautious and wise. Tap Continue [Exhibit 3] to complete the logon. Definition Wi-Fi Cell Icon Communication Status You must have a cell or Wi-Fi connection to log on for the first time. Locate the communication icon on the status bar. Icons and their definitions are shown in the table to the left. Tap the keyboard button in the bottom left corner of the keyboard if you cannot view the status bar. NOTE: If you have a signal but still see errors (such as Invalid Logon), contact your company for instructions. 6 TND 760 Fleet Edition Users Guide Exhibit 4. On-screen Keyboard Getting Started On-screen Keyboard The TND 760 on-screen keyboard is quick to access and easy to use. All controls are on the screen. Large button faces fi t your fi ngers.

(f) To use the keyboard:

Tap the keyboard button [Exhibit 4, (e)] on the TND 760 status bar to display the keyboard. Tap the ABC or !@# buttons [Exhibit 4, (a)] to view alphanumeric characters and symbols respectively. The arrow button [Exhibit 4, (c)]

on the right on the ABC screen allows you to change between upper and lower-case letters. Tap the Delete button [Exhibit 4, (b)] to erase a character. Tap the space bar button to insert a space [Exhibit 4, (f)]. Tap Enter [Exhibit 4, (d)] when you have fi nished typing. Tap the keyboard button [Exhibit 4, (e)] again to hide the keyboard. TND 760 Fleet Edition Users Guide 7 Getting Started Exhibit 5. Status Bar Icon Definition Driver Peformance. Balloon messages appear over the icon to help you manage your performance. Messages are related to metrics such as over idling and speeding. HOS. The icon changes color according to your HOS status. The icon is green when you are within acceptable limits for each HOS status. The icon changes to yellow when you are nearing violation status and to red when you are in violation. Mail. The icon appears on the status bar when you have unopened mail. Communications. The icon shows your communication status (Wi-Fi, Cellular, No communication). System message. System alerts appear in balloon messages over the icon 8 TND 760 Fleet Edition Users Guide Status Bar The status bar remains visible at the bottom of every screen and gives you access to current information about the TND 760. Any status or alert icons are found on the status bar [Exhibit 5, (a)]. Icons and their defi nitions are shown in the table to the left. The status bar also allows you to:

Check your terminal time [Exhibit 5, (b)]. Pull up the on-screen keyboard [Exhibit 5, (c)]. Return to the Menu [Exhibit 5, (d)]. Note: You can also tap the Home button on the unit to return to the Menu. Exhibit 6. Calibrate Screen Getting Started Screen Calibration As soon as the TND 760 is running, calibrate your screen. Re-calibrate from time to time, especially if the screen slips when you touch it. To calibrate your screen:

Press and hold the Home button for 10 seconds. Calibration starts once button is released. Tap the center of the crosshairs as they appear on the calibration screen [Exhibit 6]. There are four total.

- Tap as close to the center of the crosshairs symbol (+) as possible.

- Use the same pressure you normally use when tapping the screen

- If you receive an error, try again. NOTE: Do NOT press and hold fi nger on the center of the crosshairs. Just tap. TND 760 Fleet Edition Users Guide 9 Home Menu The Menu [Exhibit 7] is the home screen of the TND 760. The applications available to you on the TND 760 are identified by icons. The icons on the Menu are explained in the table to the left. Press the Home button to return to the Home Menu screen. TNDTM 760 Home Menu Exhibit 7. Home Menu Screen Icon Function View, listen and respond to messages. Review, create and send logs. Access company information. Manage settings, tasks and coommunication. Icon Function Pinpoint location and find routes. View driver perfomance stats. Log off the TND TM 760. 10 TND 760 Fleet Edition Users Guide Exhibit 8. Home Menu Safe-driving Screen TNDTM 760 Home Menu Home Menu Safe-driving Screen Menu options are limited while you are driving. When your truck is moving, the home menu safe-driving screen displays. NOTE: Functionality within the Mail, HOS and SysInfo applications is simplified while you are driving. TND 760 Fleet Edition Users Guide 11 Mail Select the Mail icon on the Home Menu [Exhibit 9]

to access messages and send e-mails. Mail opens to the Inbox tab. The tabs in Mail are explained in the table to the left. TNDTM 760 Mail Exhibit 9. Mail Icon on Home Menu Tab Inbox Outbox Send Work Options Function Holds incoming messages. Holds outgoing messages. Allows you to send messages. Helps you process assignments. Has buttons for displaying your email address and for managing your e-mail contacts. 12 TND 760 Fleet Edition Users Guide Exhibit 10. Inbox Tab TNDTM 760 Mail Inbox All incoming messages appear in your Inbox [Exhibit 10]. Special features of the Inbox tell you details about your messages. Status information is clustered together [Exhibit 10, (a), (b) and (c)].

(a). A blank space in this column means the message has been opened. An envelope means it has not been opened.

(b). A red exclamation point ( ! ) icon means the message is important. A paperclip (

has an attachment.

) icon means the message

(c). When you are working in another Mail tab, an envelope icon appears on the tab indicating that you have an unopened message. Other columns in the Inbox tell you more about your messages

[Exhibit 10, (d), (e) and (f)].

(d). This column tells you who sent the message.

(e). This column tells you the subject of the message.

(f). This column tells you when the message arrived.

-The time displays for messages that arrived on that current day

(based on your terminal time).

-The date displays for messages that arrived on previous days. TND 760 Fleet Edition Users Guide 13 TNDTM 760 Mail Exhibit 11. Open Message Screen

(a)

(c)

(b) 14 TND 760 Fleet Edition Users Guide Open Message Select a message to open it [Exhibit 11].

(d) Four action buttons are available once a message is open.

(a). Back returns you to the Inbox.

(b). Play lets you listen to the message.

(c). Reply lets you send a response to the message.

(d). Delete lets you delete the open message. Your Inbox holds 200 messages. When more messages arrive, the oldest messages in your Inbox are automatically deleted. Personal E-mail Access If your carrier has enabled personal email access. You can save up to 5 personal e-mail addresses to communicate with while on the road. Personal e-mails are color-coded blue in your Inbox so you can identify them quickly. The color coding remains after the e-mail is read. You can view your assigned e-mail address by selecting the Options tab on the Mail screen and tapping the View E-mail Address button. Exhibit 12. Outbox Tab

(a)

(b)

(c)

(d) TNDTM 760 Mail Outbox All outgoing messages appear in your Outbox [Exhibit 12]. Special features of the Outbox tell you details about your messages. Your Outbox holds 50 messages. When you have sent more than that, the oldest messages in your Outbox are automatically deleted.

(a). A green check mark ( ) icon means the message has been sent. A orange arrow ( ) icon means the message is waiting to be sent. A red X ( ) icon means the message has not yet been sent. Other columns in the Outbox tell you more about your messages

[Exhibit 10, (b), (c) and (d)].

(b). This column tells you who received the message.

(c). This column tells you the subject of the message.

(d). This column tells you when the message arrived.

-The time displays for messages that arrived on that current day

(based on your terminal time).

-The date displays for messages that arrived on previous days. TND 760 Fleet Edition Users Guide 15 TNDTM 760 Mail Exhibit 13. Send Tab 16 TND 760 Fleet Edition Users Guide Send Messages You can send messages from the Send tab [Exhibit 13]. The on-screen keyboard [Exhibit 13, (a)] appears automatically when you select the Send tab. Drop-down boxes [Exhibit 13, (b)] make it easy for you to complete the To and Subject fi elds. The To fi eld automatically selects Dispatch. The drop-down is for other contacts if you have e-mail. You can fi ll in the Subject fi eld by using either the drop-down list (if you want to send a form) or the on-screen keyboard

(if you want to send a message). If you choose a form from the drop-down list, the screen displays the form in the message fi eld (the body of the screen). When you are done, tap Send [Exhibit 13, (c)]. Exhibit 14. Options Tab Exhibit 15. Mail Safe-driving Screen TNDTM 760 Mail Options The Options tab has two buttons [Exhibit 14]. Manage Contacts [Exhibit 14, (a)]. This button lets you add contacts (for the list that displays in the To drop-down box on your Send message screen), request your contact list when you enter a new truck and make changes to your contact list. View E-mail Address [Exhibit 14, (b)]. This button lets you review your TND 760 e-mail address. Mail Safe-driving Screen When you select the Mail icon while vehicle is in motion, the mail safe-driving screen will appear. With the mail safe-driving screen

[Exhibit 15], you can hear a message rather than read it. Play and stop messages [Exhibit 15, (a)]. Hear the previous or next message [Exhibit 15, (b)]. Control volume by dragging a fi nger across the volume box

[Exhibit 15, (c)]. TND 760 Fleet Edition Users Guide 17 TNDTM 760 IntelliRoute Exhibit 16. IntelliRoute Icon on Home Menu IntelliRoute Select the IntelliRoute icon on the Home Menu [Exhibit 16] to access the truck-specifi c routing application. IntelliRoute will route you around low bridges, truck-restricted roads and help you fi nd driver-specifi c points of interest. Exhibit 17. IntelliRoute Screen

(b)

(c)

(a)

(d) Main Menu a. Enter truck information and access truck-specifi c use tools. b. Show location on the map and view navigation instructions. c. Choose a destination. d. Select TND and route preferences. e. Mute/unmute the speaker. f. Adjust speaker volume. 18 TND 760 Fleet Edition Users Guide

(e)

(f) Exhibit 18. Truck Info Screen Exhibit 19. Route Tab TNDTM 760 IntelliRoute Enter Truck Information 1. Tap Truck Tools > Truck Info [Exhibit 18]. 2. Tap and to view all options. 3. Tap to select the options to be changed. 4. Enter new truck information settings. 5. Tap Back to save changes. Set Route and Device Options 1. From the Main Menu, Tap Preferences. 2. Tap the Route tab [Exhibit 19]. 3. Tap and to view routing options. 4. Tap the option button to be changed. 5. Enter the new settings for the option. TND 760 Fleet Edition Users Guide 19 TNDTM 760 IntelliRoute Exhibit 20. Device Tab Exhibit 21. Warnings Screen 20 TND 760 Fleet Edition Users Guide 6. Tap the Device tab [Exhibit 20]. 7. Tap and to view device options. 8. Tap the option button to be changed. 9. Enter the new settings for the option. 10. Tap Back to save changes. Set Warnings 1. Tap Truck Tools > Warnings [Exhibit 21]. 2. Tap and to view all warning options. 3. Tap the option button to be changed. 4. Enter the new settings for the option. 5. Tap Back to save changes. TNDTM 760 IntelliRoute Exhibit 22. Keyboard Screen Route to Destination Find an Address 1. Tap Choose Destination > New Location. 2. Select a search type (Address, City Center or Intersection). 3. Use the keyboard to type location information [Exhibit 22]. 4. Tap on the address in the displayed list. Confi rm Destination a. Destination address. b. Begin route to destination. c. Cross reference to printed Rand McNally Motor Carriers Road Atlas. d. Return to previous window. e. View the map. f. Change the starting address for a route to the location displayed on the map screen. g. Return to Main Menu. h. Add the location to a multi-stop route as a via stop. TND 760 Fleet Edition Users Guide 21 Exhibit 23. Destination Screen

(a)

(b)

(c)

(d)

(h)

(e)

(f)

(g) TNDTM 760 IntelliRoute Exhibit 24. Address Book Tab Exhibit 25. Route Map Screen

(a)

(f)

(g)

(h) Route to Saved Location 1. Tap Choose Destination > Address Book [Exhibit 24]. 2. Tap on the All Addresses tab. 3. Tap on the destination in the displayed list. 4. Tap Begin New Route. Route Map Screen a. Repeat spoken next-maneuver instructions. b. Name of street you will turn onto next. c. Show arrival time and distance remaining. d. Directions list slideout. e. Zoom in/zoom out. f. Posted speed limit. g. Current vehicle speed. Tap to view Virtual Dashboard. h. Additional current location or route options. i. Tap to view current road name, upcoming cross road name, or city name and state.

(c)

(d)

(e) i j. Select a map display option: (North Up, Heading Up or 3D View). k. Return to Main Menu. 22 TND 760 Fleet Edition Users Guide

(j)

(k) Exhibit 26. Point of Interest Screen Exhibit 27. Timers Tab TNDTM 760 IntelliRoute Find a Point of Interest (POI) 1. Tap Choose Destination > Points of Interest [Exhibit 26]. 2. Select a search type (My Truck, City, My Route End of Day, or Destination). 3. Select a category and if necessary, a subcategory. 4. Tap on the Point of Interest in the displayed list. Enter Timers and Trails Timers Countdown timers are linked to your HOS information managed under the Hours of Service application (Driving, On-duty or Off-duty). To access the timers, Tap Truck Tools > Timers and Trails [Exhibit 27]. Tap the Timers tab to view timers, odometer readings, local, yard and destination times. Note: Odometers are driver tools and must be set manually. They are not linked to the vehicles odometer. TND 760 Fleet Edition Users Guide 23 TNDTM 760 IntelliRoute Exhibit 28. Trails Tab Exhibit 29. Route Map Screen 24 TND 760 Fleet Edition Users Guide Trails Record a New Trail The Trails feature allows you to record and later view or follow route information on the map. This capability is particularly useful when driving off-road or through private facilities such as a terminal or distribution center where road data is not available. 1. Tap Truck Tools > Trails [Exhibit 28]. 2. Tap New Trail. 3. Tap OK. The Trail Icon displays on the map screen [Exhibit 29]. 4. When you wish to stop recording, tap on the Trail icon. 5. Tap OK. TNDTM 760 IntelliRoute Exhibit 30. Trail Route Screen Exhibit 28. Trail Route Screen View Recorded Trails 1. Tap Truck Tools > Trails. 2. Tap on the trail you want to run. 3. Tap on Show on Map. 4. Tap on the Trails icon. 5. Tap:

- Trail only to show only the trail.

- Trail and Vehicle to show the trail and your current location.

- Hide Trail to not display the trail. 6. Visually follow the trail. The trail is denoted by green diamond icons. Notes:

- Because Trails mode may not contain roads, no voice direction is available.

- You can also rename and delete recorded trails. TND 760 Fleet Edition Users Guide 25 TND TM 760 Hours of Service Exhibit 31. HOS Icon on Home Menu Tab Summary Logs DVIR Options Company Function Displays critical HOS information based on your current duty status. Displays list of duty statuses for the current 8-day period. Allows you to enter and certify your DVIRs for the current 8-day period. Allows you to manage log information and settings related to violations and enforcement. Displays information related to your carrier and terminal. 26 TND 760 Fleet Edition Users Guide Hours of Service With the TND 760, your HOS information is well-organized and user-friendly. What You Do Mark the beginning of your day by submitting an On Duty status and Trip Info entry. From that point on, the TND 760 records Driving and segments automatically. The only entries you need to submit manually are Off Duty and Sleeper Berth statuses. When your day ends, you can review and certify your logsall in one streamlined process. What the System Does The TND 760 logs all your HOS activities with accurate-to-the-second technology so you can make the most of each day. When you tap the Trip Info button, the 14-hour day offi cially begins. When you begin driving after your pre-trip work is complete, Driving status is activated as soon as the tractor detects motion. When you stop, the system waits to be sure you have completed a driving segment before marking the time and activating the On Duty status. You do not need to worry about the system changing statuses when you stop for traffi c lights or signs. Exhibit 32. HOS Main Screen-Summary Tab TND TM 760 Hours of Service Summary This tab gives you critical HOS information at-a-glance. The top of the Summary tab shows the name and HOS status of the driver logged on to the TND 760 [Exhibit 32, (a)]. If the driver shown is not you, log off then log back on. The Status Box provides a summary of your current status

[Exhibit 32, (b)]. Screen left tells the time remaining before you reach HOS limits and whether you can use the 16-hour rule [Exhibit 32, (c)]. Tap the (?) button for details. Screen right shows the time remaining before each type of reset occurs [Exhibit 32, (d)].

- 70hr total. Time until a new 70-hour log starts.

- 10hr Reset. Time until a 10-hour reset.

- Split Reset. Time until reset with sleeper-berth statuses calculated in. Note: The TNDTM 760 Fleet Edition is compliant with FMCSA regulation 395.15 TND 760 Fleet Edition Users Guide 27 TND TM 760 Hours of Service Exhibit 32. HOS Main Screen-Summary Tab Summary (continued) The Summary tab also reports Hours gained back from 70hr total after midnight [Exhibit 32, (e)]. Buttons at the bottom let you change your HOS status or add specifi c trip information to the log [Exhibit 32, (f)]. The buttons display at the bottom of each HOS tab. The Todays log button accesses the graph and tabs you need to manage your day [Exhibit 32, (g)]. The functions of adding a duty status, adding trip information and managing the current days log are explained on the following pages. 28 TND 760 Fleet Edition Users Guide Exhibit 33. Pop-up for Adding a Duty Status Exhibit 34. Pop-up for Choosing a Location TND TM 760 Hours of Service Add a Duty Status Tap any duty-status button to view the [Exhibit 32, (f)) Adding record of duty status pop-up [Exhibit 33, (a)]. Most fi elds are grayed out, which means you do not need to do anything; the system records the required information automatically. The pop-up shows the status selected [Exhibit 33, (b)]. For a different status, tap Back [Exhibit 33, (c)] and select the status you want. Tap Submit [Exhibit 33, (d)] if the record is correct. If GPS is on, the Loc. fi eld will be grayed out. If GPS is off, tap More [Exhibit 33, (e)] to view the Choose location pop-up [Exhibit 34]. Choose a Location Begin typing your location in the Search box [Exhibit 34, (a)]

to bring up the section of the location list showing places beginning with those letters [Exhibit 34, (b)]. Select your location to fi ll in the Loc. fi eld. TND 760 Fleet Edition Users Guide 29 TND TM 760 Hours of Service Exhibit 35. Pop-up for Adding a Duty Status - Remarks Field Add a Remark to a Duty Status You may need to include a comment about the duty status. The cursor automatically appears in the Remarks fi eld

[Exhibit 35]. Use the drop-down arrow to view company-provided options. If a standard remark applies, select it to fi ll in the fi eld. If a standard remark does not apply, type your own remark using the on-screen keyboard. Tap Submit to record the enhanced duty-status entry. 30 TND 760 Fleet Edition Users Guide Exhibit 36. Pop-up for Adding Trip Information TND TM 760 Hours of Service Add Trip Information Tap the Trip Info button on the Summary tab to view the Adding trip information pop-up [Exhibit 36, (a)]. The on-screen keyboard automatically appears so you can enter Load, Co-driver (if appropriate), Trailer numbers and Remarks. The cursor appears in the active fi eld. To move the cursor to another fi eld, just touch the fi eld you want. Standard remarks are included in the Remarks drop-down

[Exhibit 36, (b)]. Select the remark you want or use the on-screen keyboard to enter a non-standard remark. Tap Submit [Exhibit 36, (c)] to record your information and return to the Summary tab. Tap Back [Exhibit 36, (d)] to return to the Summary tab without recording your information. TND 760 Fleet Edition Users Guide 31 TND TM 760 Hours of Service Exhibit 37. Todays Log Main Screen - Graph Tab 32 TND 760 Fleet Edition Users Guide Todays Log The Todays log button can be accessed on the Summary tab

[Exhibit 32, (g)]. Four tabs display across the top of the Todays log screen [Exhibit 37, (a)]. Graph is the tab that opens when you select Todays log. This screen has three buttons: Edit, Add Duty Status and Add Trip Info. Edit. This button [Exhibit 37, (b)] allows you to edit any uncertifi ed log from the last 8 days (select the arrow buttons and to view a previous days log). Add Duty Status. This button [Exhibit 37, (c)] on the Todays Log Graph screen allows you to add a current duty status to the current day. Any changes to earlier statuses must be made using the Edit button. Add Trip Info. This button [Exhibit 37, (d)] allows you to add information for a new trip for the current day. Any changes to the trip information for previous trips must be made using the Edit button. Note: Driving status time cannot be edited once recorded. Exhibit 38. Pop-up for Editing Trip Information

(a)

(e)

(d)

(c) TND TM 760 Hours of Service Edit Trip Information Before selecting the Edit button [Exhibit 37, (b)], you can tap the graph screen on the point where you would like to make an edit. The green line on the graph indicates a change in duty status. You can also tap the Prev and Next buttons to move the green line to the desired point on the graph. Once you tap Edit, the Editing trip information pop-up will appear [Exhibit 38, (a)]. Make any changes to the preexisting information [Exhibit 38, (b)]. Tap Delete [Exhibit 38, (d)] If you wish to delete the entire status entry. Tap Back [Exhibit 38, (e)] to go back to the Graph tab. Tap Submit [Exhibit 38, (c)] to save your entry. TND 760 Fleet Edition Users Guide 33 TND TM 760 Hours of Service Exhibit 39. Graph Tab - Day to be Certifi ed Certify Logs If you have outstanding uncertifi ed log entries (those that do not have a check mark next to them), you should review and certify them as soon as possible. Uncertifi ed log entries must be certifi ed in order of oldest to newest. Review the entry using the tabs (Graph, List, Summary and Trip Info) to verify that the log is accurate. Make any required changes.

- To change an incorrect status, select the correct status from either the Graph or the List tab. Tap Edit [Exhibit 39, (b)]

to access the required pop-up. Make your changes and tap Submit. NOTE: If a status that cannot be edited on the TND 760 is incorrect, contact your manager for help. 34 TND 760 Fleet Edition Users Guide Exhibit 39. Graph Tab - Day to be Certifi ed TND TM 760 Hours of Service Certify Logs (continued)

-To add a status, tap Add Duty Status [Exhibit 39, (c)]. Fill in the time, change the duty status fi eld (if required) and enter the location. Add Remarks if appropriate. Tap Submit.

-To alter the trip information record, tap Add Trip Info

[Exhibit 39, (d)], fi ll in the form and tap Submit. Once you are satisfi ed that the log is accurate, tap Certify

[Exhibit 39, (e)]. A pop-up asks you to confi rm the log is correct.

-Tap No to return to the previous screen.

-Tap Yes to return to the Logs tab. When the log has been certifi ed and recorded, a green check mark appears at the beginning of the row. TND 760 Fleet Edition Users Guide 35 TND TM 760 Hours of Service Exhibit 40. Logs Tab 36 TND 760 Fleet Edition Users Guide Logs The Logs tab gives a summary of the totals for the last 8 days

[Exhibit 40]. Past days that you want to review, edit or certify are selected here. The top of the tab lists your name and current HOS status

[Exhibit 40, (a)]. If you are not the driver shown, log off the TND 760, then log back on. The columns on this tab show summary information about each days log.

- Date. Displays the last eight days with the current date at the top of the list.

- Miles. States the number of miles traveled for the day.

- Off-duty. Gives the number of off-duty hours logged for the day.

- S.B. Indicates the time spent in the sleeper berth for the day.

- Driving. Gives the time spent driving for the day.

- On-duty. Gives the time spent on-duty but not driving for the day. The check marks to the left of the date column show which days have been certifi ed [Exhibit 40, (b)]. Exhibit 41. DVIR Tab

(c)

(a)

(b)

(d)

(e)

(f) TND TM 760 Hours of Service

(g)

(h) DVIR The DVIR (Daily Vehicle Inspection Report) tab contains information regarding all DVIR entries from the last 8 days. DVIR information is clustered together [Exhibit 41, (a), (b) and (c)].

(a). A blank space in this column means the DVIR entry has not yet been certifi ed.

(b). A green check mark ( ) means the DVIR has been certi ed. A tool icon ( ) means a DVIR entry has been added and that there is an outstanding defect that should be reviewed and certifi ed.

(c). A warning icon ( ) on the DVIR tab means there is an outstanding defect.

(d). This column tells you when the DVIR entry was made. The time and date are listed.

(e). This column tells you the number of defects listed in the DVIR entry.

(f). This column tells you the Driver ID of the person who added the DVIR entry. TND 760 Fleet Edition Users Guide 37 TND TM 760 Hours of Service Exhibit 42. Pop-up for Adding DVIR Exhibit 43. Pop-up for Adding Defect 38 TND 760 Fleet Edition Users Guide Add a DVIR Add DVIR. Use this button when you want to add a DVIR for the current day or for any day within the last 8 days

[Exhibit 41, (g)].

- Trailer(s).

- Time and Date. You may have to enter defects from your inspection. If so, select Yes [Exhibit 42].

- Enter the Location and Defect fi elds [Exhibit 43]

- You can also add other notes about the inspection in the Remarks fi eld. Note: You can also view this screen by selecting any DVIR entry from the past 8 days on the DVIR main screen. This will allow you to add a defect to a previous days DVIR. Exhibit 44. DVIR Record-Defects Tab TND TM 760 Hours of Service Certify DVIR Entries and Repairs To review the entered defects of previous DVIR entries, select any entry from the last 8 days on the DVIR tab [Exhibit 40].

-Defects tab [Exhibit 44]. Select this tab to view the description of each defect listed for the selected DVIR. Click on any of the defect entries to view any entered remarks. TND 760 Fleet Edition Users Guide 39 TND TM 760 Hours of Service Exhibit 45. DVIR Record - Certify Tab Certify DVIR Entries and Repairs (continued)

- Certify tab [Exhibit 45]. Select this tab to certify the DVIR entry. Reported by: lists Driver ID and time and date of DVIR entry. Repaired by: lists Driver ID and time and date of repair.

- Tap No repairs needed.

- Tap Repairs Made to indicate that defects have been repaired. Note: You must select one of these options in order to certify your DVIR. Review:

- Tap Certify to submit the DVIR. As with other HOS screens, you can update your current status with the buttons at the bottom [Exhibit 40]. 40 TND 760 Fleet Edition Users Guide Exhibit 46. Options Tab TND TM 760 Hours of Service The Options tab allows you to:

Request Logs. Use this button when you want to move your logs from a previous tractor or when you have previous logs that you cannot view. The button brings up a pop-up box that displays the following notice:

Those portions of your log that havent been received by the back-end may be deleted when your HOS logs are downloaded.

- You choose whether to continue (Yes) or to cancel the request (No). Change Trucks. Use this button before you move to another tractor to confi rm for yourself that your logs are sent to the server and will be available for you when you log on in the new truck (you may need to use Request Logs on the new truck, but usually the logs arrive as you log in). TND 760 Fleet Edition Users Guide 41 TND TM 760 Hours of Service Exhibit 46. Options Tab Options (continued) Fax/E-mail Logs. Use this button to fax or e-mail your logs. Note: You cannot send your logs unless you have certifi ed all. logs from the last 8 days. You must wait 10 minutes before sending your log again. View Violations. Use this button to review any violations that are currently part of your weekly log.

- The screen shows the type of violation, the time and date the violation began, and the time and date the violation ended.

- If you have multiple violations on the same day, each driving segment is its own violation. However, violations on the same day count as a single violation for the day. 42 TND 760 Fleet Edition Users Guide Exhibit 47. Pop-up for Changing Mode TND TM 760 Hours of Service Options (continued) Change Mode. This button lets you govern the information displayed by the TND 760.

- Normal. This option is the default or standard working mode.

- Roadside Audit. This option provides limited access to your logs when enforcement asks to see them. No additional information is shown except what is required by law. No log information can be changed by you or enforcement while you are in Roadside Audit mode. Tap Normal to exit Roadside Audit mode.

- Enter your Driver ID.

- Personal Conveyance. This option, if allowed by your carrier, lets you use your vehicle for personal use. Use this mode only when your vehicle is not laden. The use of personal conveyance is strictly monitored by your carrier as your carrier may have additional re-

quirements not specifi cally listed in 395.8. If you have questions, ask your carrier before using this feature. As with other HOS screens, you can update your current status with the buttons at the bottom [Exhibit 46, (b)]. TND 760 Fleet Edition Users Guide 43 TND TM 760 Hours of Service Exhibit 48. Company Tab 44 TND 760 Fleet Edition Users Guide Company The Company tab [Exhibit 48] contains information required for your log. Your carrier must make the changes to this screen. If any of the information is incorrect, contact your manager for help. Carrier The upper half of the screen identifi es your carrier

[Exhibit 48, (a)].

- Name.

- Address.

- DOT number. Terminal The lower half of the screen identifi es the home terminal to which the TND 760 is assigned [Exhibit 48, (b)].

- Name.

- Address.

- Start. This fi eld shows the time and time zone for the terminal, which governs the HOS information captured by the unit. Exhibit 49. HOS Safe-driving Screen TND TM 760 Hours of Service HOS Safe-driving Screen The time shown on the HOS safe-driving screen is the effective drive time available to you for the day [Exhibit 49]. The time indicates how long you can drive before going into any violation, so the time displayed may not be your actual available drive time if you are close to your 14 or 70-hour limit. Time. Two numbers appear for your remaining drive time if the 16-hour rule is active. Color. Color coding lets you closely monitor your HOS statuses and take whatever action is necessary to remain in compliance. When vehicles are in compliance with HOS limits, the time displays in green. When a vehicle is within one hour of the legal limit for any HOS requirement, the display changes to yellow. When a vehicle is out of time for any HOS requirement, the display changes to red. TND 760 Fleet Edition Users Guide 45 TND TM 760 Stats Exhibit 50. Stats Icon on Home Menu Stats Select the Stats icon on the Home menu [Exhibit 50] to access information about driver performance and fault codes. Stats opens to the Driver Performance tab. The tabs in stats are explained in the table to the left. Tab Driver Performance Fault Codes Function Displays statistics based on idle time, RPM, engine and motion time. Displays list of duty statuses for the current 8-day period. Displays fault codes and the location and type of fault in relation to your vehicle. 46 TND 760 Fleet Edition Users Guide Exhibit 51. Driver Performance Tab TND TM 760 Stats Driver Performance The Driver Performance tab displays provides these statistics:

Hard brakes where vehicle speed is over 20MPH. Miles / MPG. Idling percentages for Short, Mid and Long Idles. Over Idle %where idle is over your eets grace period. Over RPM%. Speeding%. You can tap the Show more metrics for today button

[Exhibit 51, (b)] to view a pop-up with information on Idle fuel, Stop Idle %, Total Idle %, Driving %, Engine time and Motion time. You can tap the Request metrics for month button

[Exhibit 51, (c)] to receive an update on driver performance. The report includes month-to-date information. TND 760 Fleet Edition Users Guide 47 TND TM 760 Stats Exhibit 52. Fault Codes Tab Fault Codes The Fault Codes tab [Exhibit 52, (a)] displays recorded fault codes for the vehicle. Two columns provide details about the fault

[Exhibit 52, (b)]. Source. Indentifi es the location of the fault

(e.g., engine, cab controller, etc.). Subsystem/Parameter. Identifi es the type of fault. 48 TND 760 Fleet Edition Users Guide TND TM 760 SysInfo SysInfo Select the SysInfo icon on the Home menu [Exhibit 53] to control system settings and to view technical information about your TNDTM 760. SysInfo opens to the Settings tab. The tabs in SysInfo are explained in the table to the left. Exhibit 53. SysInfo Icon on Home Menu Tab Settings Function Allows you to control the volume and screen brightness. Info Displays system information. Diagnostics Displays information related to your TND 760's communication status. TND 760 Fleet Edition Users Guide 49 TND TM 760 SysInfo Exhibit 54. Settings Tab Settings Volume. Control the volume of your TND 760 by selecting Mute or by tapping the Down and Up buttons [Exhibit 54, (a)]. Each tap changes the volume by 10 percent. You can also change the volume by pressing down and drawing your fi nger across the percentage box. Backlight. Control the backlight by selecting Off or by adjusting the screens brightness by tapping the Down and Up buttons

[Exhibit 54, (d)]. You can also press down and draw your fi nger across the percentage box. Low dims the screen to less than 10 percent. Exhibit 55. Info Tab Info Tap Info to access registration information for your TND 760. The fi elds on the tab window include Cust. ID.

(Customer Number), Software Version, Truck # and S.N. (Serial Number) 50 TND 760 Fleet Edition Users Guide Exhibit 56. Diagnostics Wi-Fi Sub-Tab Exhibit 57. Diagnostics Files Sub-Tab TND TM 760 SysInfo Diagnostics Status. Shows the current method of communication

[Exhibit 56, (b)]. Health Check. Confi rms function of system hardware. Cell. Provides status of cell connection. Wi-Fi. Provides status of Wi-Fi connection

[Exhibit 56, (a) and (b)]. Files. Shows fi les scheduled for download or upload [Exhibit 57].

- Downloads to the truck [Exhibit 57, (a)] can include software updates and dispatch fi les.

- Transfer [Exhibit 57, (c)] provides the current status of the fi le being transferred. If you are expecting a software update, you can look here to see the status of that download. The percentage shown indicates how much of the fi le has been received. JBus. Confi rms connection to on-board computer. GPS. Captures latitude, longitude, altitude, speed, direction and provides debug information for the GPS. TND 760 Fleet Edition Users Guide 51 TND TM 760 SysInfo Exhibit 58. SysInfo Safe-driving Screen SysInfo Safe-driving Screen The SysInfo safe-driving screen allows you to adjust the TND 760s volume and screen brightness [Exhibit 58]. 52 TND 760 Fleet Edition Users Guide Troubleshooting Troubleshooting To assist you with troubleshooting, please refer to the list of possible solutions below. You are always welcome to call Customer Support, but the hints in the chart on the left may be all you need to have your system up and running quickly. Problem Possible Solutions No power or intermittent power loss:

Unable to register:

Unable to send and receive messages:

Unable to connect cellular modem, GPS or Wi-Fi:

Nothing appears on display:

Unable to use touch screen:

Check power connection

- Ensure that the cable is secured to Deutsch port and display.

- Reestablish the cable connections by unplugging them, then plugging them back in. Check communications

- Look for any crossed-out icons on the lower right of the display.

- Take the truck for a drive to ensure that the issue is not signal interference. Verify registration information

- Check the Registration screen to make sure you have entered the correct Truck #.

- Verify your customer number (Customer # or Cust. ID). If you have questions about your customer number, please call Customer Support at 1-800-641-RAND (7263). Check communications

- Look for any crossed-out icons on the lower right of the display.

- Take the truck for a drive to ensure that the issue is not signal interference. Restart the unit

- Restart the unit by rst logging off, then pressing the On/Off button. This will cause the unit to reset and reconnect. Check connections

- Take the truck for a drive to ensure that the issue is not signal interference. Restart the unit

- Restart the unit by rst logging off, then pressing the On/Off button. This will cause the unit to reset and reconnect. Check connections

- Take the truck for a drive to ensure that the issue is not signal interference. Check connections

- Ensure that the cable is connection to Deutsch port and display. Restart the unit

- Restart the unit by rst logging off, then pressing the On/Off button. This will cause the unit to reset and reconnect. Try a different unit

- Try a different unit to determine whether the issue is with the unit or cable. J-Bus not responding:

Check connection Make sure truck ignition is on Restart engine Rand McNally follows a continuous improvement process and reserves the right to provide enhancements that may not be reflected in the pictures and specifications of this manual. Rand McNally and IntelliRoute are registered trademarks and TND is a trademark of Rand McNally. The Truckers Friend and National Truck Stop Directory are registered trademarks of TR information Publishers, Truck Down is a registered trademark of TruckDown Info International, Inc. NAVTEQ ON BOARD is a trademark of NAVTEQ NAVTEQ. All rights reserved. 2012 Rand McNally. All rights reserved. While the information contained herein is believed correct when compiled, Rand McNally does not guarantee its accuracy. U.S. Patent No. 7,580,791 TND760010612_0001_v1

The modular approval on this module has the following restrictions:

1. It is host specific as the FCC defines this. See FCC document kdb 996369. 2. The grant limits it use to devices that are more than 20 cm from the human body. This by definition is means used in fixed location and mobile devices. See FCC rule Part 2.1091. 3. The module is currently authorized for the specific style antenna used in the TND-760 and the following information (excerpted from kdb 996369) should be understood in subsequent designs. Question 11: Can a module be certified where the host device must use a micro-strip trace on the hosts printed circuit board to an antenna connector or a trace antenna on the host circuit board?

Answer 11: A modular transmitter may be certified when the connection to the antenna is made through a hosts printed board micro-strip trace layout to an external connector, trace antenna or component (chip) antenna on a printed circuit board (herein referenced as trace design). This can be extended to include passive parts for antenna attenuation padding, impedance matching or providing test ports. Other components such as amplifiers and active drivers are not considered a trace layout and must be contained on the module. The Form 731 application shall include detailed engineering reference designs for the trace design in addition to the required OEM instructions (see Comprehensive integration instructions above) for all trace designs approved with the module. In particular the integration instructions shall include the following:

1. Trace layout and dimensions including specific designs for each type:

a. Layout of trace design, parts, antenna ,connectors and isolation requirements;

b. Boundary limits of size , thickness, length, width, shape(s) dielectric constant, and impedance must be clearly described for each type antenna;

c. Different antenna length and shapes affect radiated emissions and each design shall be considered a different type; e.g., antenna length in multiple(s) of frequency wavelength and antenna shape (traces in phase) can affect antenna gain and must be considered;

d. The above data is to be provided by a Gerber file (or equivalent) for PC layout. 2. Appropriate parts by manufacturer and specifications. 3. Test procedures for design verification. 4. Production test procedures for ensuring compliance. Only trace designs approved at the time of grant or through permissive change can be used by the OEM. PCB circuit designs have an increased potential for design mishandling and they are susceptible to cross-talk and increased unintentional radiation. The applicant must provide compliance test data for all antenna circuit trace designs being marketed or used.