all | frequencies |
|
|
|
|
exhibits | applications |
---|---|---|---|---|---|---|---|
manual | photos | label |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 2 3 4 |
|
Users Manual | Users Manual | 4.71 MiB | March 07 2018 | |||
1 2 3 4 |
|
Internal Photos | Internal Photos | 696.61 KiB | March 07 2018 | |||
1 2 3 4 |
|
External Photos | External Photos | 778.91 KiB | March 07 2018 | |||
1 2 3 4 |
|
ID Label/Location Info | ID Label/Location Info | 114.79 KiB | March 07 2018 / April 07 2018 | |||
1 2 3 4 | Block Diagram | Block Diagram | July 03 2018 | confidential | ||||
1 2 3 4 |
|
Confidentiality | Cover Letter(s) | 479.50 KiB | March 07 2018 / April 07 2018 | |||
1 2 3 4 |
|
Declaration of Conformity FCC subpart 15B | Cover Letter(s) | 376.17 KiB | March 07 2018 / April 07 2018 | |||
1 2 3 4 |
|
Declaration of authorization | Cover Letter(s) | 346.77 KiB | March 07 2018 / April 07 2018 | |||
1 2 3 4 | Test Report | March 07 2018 / April 07 2018 | ||||||
1 2 3 4 | Test Setup Photos | March 07 2018 | ||||||
1 2 3 4 | RF Exposure Info | March 07 2018 / April 07 2018 | ||||||
1 2 3 4 | Test Report | March 07 2018 / April 07 2018 | ||||||
1 2 3 4 | Test Report | March 07 2018 / April 07 2018 | ||||||
1 2 3 4 | Test Setup Photos | March 07 2018 | ||||||
1 2 3 4 | Test Setup Photos | March 07 2018 | ||||||
1 2 3 4 | Cover Letter(s) | March 07 2018 / April 07 2018 | ||||||
1 2 3 4 | RF Exposure Info | March 07 2018 / April 07 2018 | ||||||
1 2 3 4 | RF Exposure Info | March 07 2018 / April 07 2018 | ||||||
1 2 3 4 | Test Report | March 07 2018 / April 07 2018 | ||||||
1 2 3 4 | Test Report | March 07 2018 / April 07 2018 | ||||||
1 2 3 4 | Test Setup Photos | March 07 2018 | ||||||
1 2 3 4 | Test Setup Photos | March 07 2018 | ||||||
1 2 3 4 | Cover Letter(s) | March 07 2018 / April 07 2018 |
1 2 3 4 | Users Manual | Users Manual | 4.71 MiB | March 07 2018 |
Smart Robot User Manual Version 1.0 / June 2018 / Model#: RBE001 Copyrights Robotelf Technologies Co., Ltd. All rights reserved. All information contained in this manual is protected by copyright law. Without the permission of Robotelf Technology Co., Ltd. (here in after referred to as "Robotelf") will not be able to reproduced, disseminated, modified, transcribed, translated or diverted for his use. Disclaimer You understand and agree that the products contained in this manual, which are available to you on a "depends on the situation" and "depends on the availability" status. To the fullest extent permitted by law, Robotelf does not provide any warranties or conditions, express or implied, including, but not limited to, commercial suitability, compliance with special purpose, infringement of the interests of any other person, and any warranties of use or inability to use the products contained in this manual. Robotelf does not guarantee the accuracy or reliability of any information obtained through the use of the manual or through the use of this manual. Robotelf has not made you a commitment to this product without any problems. Users clearly understand and agree with Robotelf, its director, shareholders, no employee, agent, Director, authorized person, heir, assignee, subsidiary, subsidiary, supplier or relationship enterprise shall be required to do any direct, indirect, special, derivative, consequential, or implied, or arising , punitive, disciplinary or collateral damage (including but not limited to loss of interest, business interruption, loss of data or other pecuniary loss) is responsible, regardless of whether Robotelf has been warned to open the possibility of loss, and even if the remedial measures do not meet their underlying purposes, this does not affect your legal rights. Certain jurisdictions do not allow the full exemption of liability or limitation of liability for the foregoing loss, if the relevant decree prohibits, some of the foregoing exclusions or restrictions may not apply to you, under applicable law, if the Robotelf parties cannot refuse to bear any implied warranty liability and limit their own responsibility, the scope and duration of such liability shall be the minimum allowable value of the above law. Robotelf reserves the right to modify this manual at any time without prior notice to you. This manual will be updated with the specification of the product or software changes. If you have any other question, we suggest you consult Robotelfs product technical support line +886-2-
2797-8660 #9. 1 Robelf User Manual For children under age 5 who have a decline in physical, sensory or mental function, or have no relevant experience or knowledge, please ensure that this product is used in a safe manner, subject to supervision or guidance, and prior knowledge of the risks involved. Children should be accompanied by a parent when using this product and should not be cleaned and maintained without supervision. Warning: Do not expose electronic components, batteries, or chargers of this product. Users do not repair the internal components of products, should be handed over to qualified personnel, please ensure that the Charger power supply rated voltage to meet the standard socket voltage. Attention: Over use this product may cause visual impairment!
1. Please rest for 10 minutes after using for 30 minute straight. 2. It is not recommended that children under the age of 2 watch the screen; if its necessary, no more than 2 hours per days is strongly suggested. Index Robelf User Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Copyrights . 1 Disclaimer . 1 Index . 3 Safety Information . 5 Recommended Using Environment . 7 Specifications . 8 Package Contents . 9 About Robelf . 10 First Time Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Initial Setup . 12 Robelf Tutorials Voice Commands . 15 Robelf Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Execute Manually . 17 Camera . 18 Album . 19 Calendar . 20 Call . 21 Message . 22 Weather . 23 Story . 24 Guard Mode . 25 Clock . 27 System Settings . 29 Familybook . 31 Admission Management . 33 General Settings . 34 Wi-Fi Setting . 35 Set Time Zone . 36 2 Robelf User Manual 3 Robelf User Manual Sensor . 37 Do Not Disturb . 38 Behavior . 39 Developer . 40 Storage . 41 System Update . 42 Unbind . 43 Turn off Robelf . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44 Install Robelf App . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 Scan QR Code . 45 Register Account . 46 Bind with Robelf . 48 Robelf App Main Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53 Messages . 53 Devices . 55 Account . 56 Robelf Device Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57 Member . 57 Call . 57 Remote . 58 Safe Alerts . 58 Behavior Coding . 60 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66 Warranty Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67 Warranty Period . 67 Terms of Use . 67 Warranty Card . 71 Safety Information Considerations for Using Robelf To reduce the risk of injury or damage, keep the following considerations in mind when setting up, using, and maintaining Robelf:
When using speech function, it is recommended to be a clear and loud Mandarin, so that the voice interaction will be function smoother. Do not sit or stand on Robelf. Children should use this product under supervision, as well as cleaning and maintaining products. Before using Robelf, please tidy up the clothing, paper, curtains on the ground, power cord, and any items that may affect Robelf walk. If Robelf passes through the power cord and drags it away, it may pull the items on the table or shelf down. The manufacturer can use this interface to update the internal firmware for any updates to the software interface for Robelf. It is strictly prohibited to access, retrieve, copy, modify, distribute, or use the Robelf software for other purposes. Do not impact the Robelf with external gravity. Do not place any items on the Robelf or non- Robelf accessories. Please use a soft, clean cloth with water or diluted alcohol (the recommended water and alcohol ratio is 1:3), gently wipe the Robelfs touch screen. Do not use bleach, Paint or other chemical substances (such as antimicrobial or lubricant) to prevent screen coating from falling off or other undesirable effects. Recommended temperature for Robelf is to operate it indoor within an environment around 59F (15C) to/95F (35C). To avoid charging in extremely hot or cold environments, the most appropriate temperature is 59F (15C) to/95F (35C). Do not store Robelf near a source of fire or any other heat sources. Do not place Robelf in a high-temperature environment or in direct sunlight. Do not place Robelf in the fire, which may cause explosions, and harmful substances may be dispersed in the surrounding environment. Do not immerse Robelf in water or any other liquid. Do not discard Robelf with other living garbage. Place the discarded Robelf in the resource recycle area for unified processing. Do not attempt to disassemble Robelf. Do not attempt to replace the battery in Robelf, which will affect the warranty and may cause serious damage. 4 Robelf User Manual 5 Robelf User Manual If you need to manually move Robelf, hold the Robelfs body and move it carefully. When Robelf's facility is in operation, do not pull Robelf's head and hands in the opposite direction. If jewelry, such as bracelets and rings, stocks on the machine or clothes rolls into wheels, please use a sharp object to press the small hole behind Robelf to shut down the power immediately. Recommended Using Environment Indoor Environment Robelf is for indoor use. Try to avoid obstructions in your environment to avoid affecting Robelfs path. The anti-collision capability of Robelf may not be properly detected in the following situations:
1. 2. Hitting only the head. 3. After moving on the unsteady floor, it encounters a collision. 4. The execution of "turning around" movement. Slight collision with slow moving speed. Floor Restrictions Make sure that the floor of the environment is flat, avoiding the high and low elevation of the stair over 1.5 meter. Robelf cannot move on black surface due to the infrared sensors. If its necessary, please turn the sensors off manually under System settings. Thick or long-haired carpets might affect Robelfs moving ability. Light Ample light can help with the face recognition function better. Voice Command When voice commands are given, the environment should not be too noisy. Do not give the voice commands by more than 1 people at the same time, so it wont affect Robelfs judgment. For user identification, it is recommended that Robelf should be in front of a user and give instructions in order to facilitate Robelf s identification successfully. Wi-Fi Network When mobile App and Robelf are linked together, please make sure the mobile phone is Robelf requires a W-Fi network environment to use the full function. connected to the Internet. 6 Robelf User Manual 7 Robelf User Manual Specifications Model No. Robelf Size (LxWxH) 350mm*290mm*850mm Weight OS CPU Memory Storage Power AC Battery Sensors Camera Display Microphone Language 7kg Android 7.0 MTK/ARM-A53/1.3GHz 2GB 16GB Input: 100-240V AC 50/60Hz Output: 20V DC, 2.25A, 45W Can last 4-7 hours under Wi-Fi connection Ultrasonic Sensors*5 Infrared Sensor*3 Front 5MP / Back 720P (built-in battery) 1280*800 Microphone Array*2 Traditional / Simplified Chinese; English Obstacle Avoidance Detects distance around 30cm Environment Condition Indoor temperature : 59F - 95C Moving Speed
(Different floor materials might affect the speed. Minimum: 70mm Maximum: 300mm/s Moving Abilities Head (Up/Down) Head (Left/Right) Body Move Body Turn Turning Angles Max -35 Max -60 Max 85 Max 60 N/A 360 Before using Robelf, please read the Safety Information carefully in order not to damage Robelf. Package Contents Please make sure all the items below are included. Robelf Smart Robot Power Adapter
( TPV-ADPC2045 ) User Manual &
Voice Command List Arms(Up/Down) Max 360 Note: If the specification changes, no additional information will be notified. Note: If any of these items is damaged or missing, please contact us immediately. The actual accessories might differ based on the package you purchase. 8 Robelf User Manual 9 Robelf User Manual About Robelf Front View Back View First Time Use 1. Plug the cable into socket first. Camera Touch Panel LED Light Ultrasonic Sensors Infrared Sensors Power Reset Power Jack Then plug the power cable into the power jack on Robelf. 2. 3. Press the Power Button for 6-10 seconds to turn Robelf on. Indications for LED Lights:
Status Color Brightness Frequency Out of battery Charging (cannot be turned on) Red Charging (can be turned off ) Blue+Red Battery Fully Charged Green Low Medium Medium Low Low Low System Notification Yellow+Green Medium High Medium High Security Guard Mode on Red High High 10 Robelf User Manual 11 Robelf User Manual Initial Setup Please select a language for Robelf first. Notice that English and Traditional Chinese systems will have to connect to U.S server which may not be supported in some countries. Please proceed the initial setup by the following steps:
1. After seeing the startup animation, the setups begin. 2. When Robelf is connected to the network, you will be seeing her say greetings. Then, choose your time zone for a more precisely positioning. 3. Please create an Owner Account for Robelf by taking the ID photo first. Last, choose a Wi-Fi network in order for Robelf to function properly. 4. Then, install Robelfs exclusive mobile App. 12 First Time Use 13
*This QR Code is for demonstration only. Robelf User Manual 5. After installing, please create an App account. Robelf Tutorials Voice Commands Please follow the steps to see how to give Robelf commands . 1. Use the command "Hey, Robelf" to wake Robelf up. 6. Choose to Add a Robelf. 7. At last, scan your Family OR Code to connect to your Robelf. 2. Basic voice commands to open functions. 3. You can also open the Function Menu manually. 14 First Time Use 15 Robelf User Manual 4. After saying "Hey, Robelf", ask Robelf to turn left and turn right. Robelf Functions Robelf offers various of applications such as Camera, Album, Weather, Clock, Calendar, Story and so on. Execute Manually 1. Touch Robelfs nose to open the Function Menu. 2. Slide the page left or right to see more function. Note: For more commands, please see the Voice Command List attached. 16 First Time Use 17 Robelf User Manual Camera You can use Robelf to take a picture and record a video. Album You can use Robelf to view photos and videos. Voice Commands
"Open camera"
"Take a picture"
"Record a video"
Voice Commands
"Open album"
"Show me photos"
Say "Hey, Robelf" to wake Robelf up. To take a photo:
1. 2. Make sure Robelf is listening. 3. 4. When you are ready say "Hey, Robelf" and wait for the beep sound. 5. Say "I am ready" to take the picture. Say "take a picture". Say "Hey, Robelf" to wake Robelf up. To view photos:
1. 2. Make sure Robelf is listening. 3. 4. Choose the photo or video manually to view. Say "open album". Switch to Video Switch to Camera Take Photo/Record Video Photo Album Video Album Set Countdown Timer 5. On the preview page, you can slide left or right to see more photos. 18 Robelf Functions 19 Robelf User Manual Calendar You can use Robelf to create an event reminder. Call You can make a video call to the family member who has an App account. Voice Commands
"Open calendar"
"Make a schedule"
Voice Commands
"Make a call"
"Video call"
Say "Hey, Robelf" to wake Robelf up. To view an event:
1. 2. Make sure Robelf is listening. 3. 4. Say "open calendar". You can choose the date manually or say "month/date" to view the event for a certain day. Say "Hey, Robelf" to wake Robelf up. To make a call to members App:
1. 2. Make sure Robelf is listening. 3. 4. Choose the member you wish to talk to manually or say the number. Say "make a call". Todays Schedule Holiday Members Birthday 5. One the date page, you can see all the schedules set for that day and edit as well. Robelf 5. You can turn off the camera or change the voice volume during the call. will also remind you the event one hour ahead when she sees you. End Call Close Camera Mute Microphone Change Volume 20 Robelf Functions 21 Robelf User Manual Message You can leave a message on Robelf to the family member and Robelf will remind it when she sees the person. Weather You can check on the current weather condition and see the 5-day weather forecast. Voice Commands
"Open message"
"Send message"
Say "Hey, Robelf" to wake Robelf up. To see or send a message:
1. 2. Make sure Robelf is listening. 3. 4. Say "open message". You can see the message sent to/from you or send a new message. Voice Commands
"Weather"
"Hows the weather today"
"Weather forecast"
Say "Hey, Robelf" to wake Robelf up. To check on the weather:
1. 2. Make sure Robelf is listening. 3. 4. Say "hows the weather today". You can also see other citys weather condition. Send New Message Select & Delete Message 5. When sending a new message, you need to choose a member first. Start Recording
(shows the available seconds left) Close Camera Switch to (Celsius) Switch to (Fahrenheit) Select City Manually 22 Robelf Functions 23 Robelf User Manual Story You can ask Robelf to read a story for your little ones. Guard Mode With Robelfs facial recognition system, this mode can protect your family from unknown intruders. Voice Commands
"Read a story"
"Play story"
Voice Commands
"Turn on guard mode"
"Guard mode on"
Say "Hey, Robelf" to wake Robelf up. To hear a story:
1. 2. Make sure Robelf is listening. 3. 4. Say "read a story". You can choose story manually or just say the number. Say "Hey, Robelf" to wake Robelf up. To make Guard Mode activated:
1. 2. Make sure Robelf is listening. 3. 4. Say "guard mode". You will need to set a disarm password first in order to turn it on. 5. On the story cover, just say Play to start playing. 5. When Guard Mode is on, if Robelf sees a stranger, she will send a notification to users App. You can clear the alarm from the App or directly on Robelf. Play Close/Open Caption Auto Play on/off 24 Robelf Functions 25 Robelf User Manual Clock You can check the local time, add world clock, set an alarm or timer on Robelf. 6. Setting the countdown timer can only be done manually as well. Voice Commands
"What time is it"
"Open clock"
"Set alarm"
"Set timer"
Say "Hey, Robelf" to wake Robelf up. To see the local time:
1. 2. Make sure Robelf is listening. 3. 4. Say "what time is it". You can also add more clock time to Robelf. World Colck Alarm Countdown Timer 5. The alarm can be set for daily or once, it can only be done manually. 26 Robelf Functions 27 Robelf User Manual Settings Here you can find and change all Robelfs system settings Voice Commands
"System setting"
"Open system"
To change the system settings for Robelf:
1. Say "Hey, Robelf" to wake Robelf up. 2. Make sure Robelf is listening. 3. 4. On this menu, you can choose the function manually or just say the number. Say "open system setting". 6. Below are all the functions under System Settings.
(1) Behavior: Please see Page 39.
(2) Developer: Please see Page 40.
(3) Storage: Please see Page 41.
(4) System Update: Please see Page 42.
(5) Unbind: Please see Page 43. 5. Below are all the functions under System Settings:
(1) Familybook: Please see Page 31.
(2) General Settings: Please see Page 34.
(3) Wi-Fi Setting: Please see Page 35.
(4) Set Time Zone: Please see Page 36.
(5) Sensors: Please see Page 37.
(6) Do Not Disturb: Please see Page 38. 28 Robelf Functions 29 Robelf User Manual Familybook You can add a new family member, change the authority level and edit your profile here 7. Touch members icon to view more details. Voice Commands
"Number one"
Say "Hey, Robelf" to wake Robelf up. To view or edit new family members:
1. 2. Make sure Robelf is listening. 3. 4. 5. Say "system setting". Say "number one". You need to identify yourself first or by entering as a visitor. Photo ID: Change your ID photo. Appellation: Change your appellation. Birthday: Change your birthday. QR Code: Use this code to connect the App account. Administrator: Can be set to Administrator or General User. Delete: Only the member himself or the owner can delete members profile. 6. One this page, you can view all the members or add a new one. Owner Administrator With this icon, it means this member has connected to Robelf App. 30 Robelf Functions 31 Robelf User Manual Admission Management Function Owner Administrator General Visitor Note Can only edit your event Can only delete your message Can only delete yours Can only edit yours Need verification code Camera Album Calendar_View Calendar_Create Calendar_Edit Call Message_View Message_Send Message_Delete Weather Story Guard Mode_Turn on/off Guard Mode_Set Password Familybook_View Familybook_Add Familybook_Delete Familybook_Edit Familybook_Set Permission Unbind Robelf Other Settings Time Dance Message_Disarm Alarm App_Robelf_Set Member Permission App_Robelf_Call App_Robelf_Remote App_Robelf_Safe Alerts App_Robelf_Behavior Coding O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O X X X X O O O O X O O O O O O O O O O O O O O O O X O O X X X X O O O X X O O X O O O O X X O O O X O O X X O X X X X X O O O X X X X X X General Settings You can adjust Robelfs setting here, including system, media, voice volume and so on. Voice Commands
"Number two"
Say "Hey, Robelf" to wake Robelf up. To change some system settings for Robelf:
1. 2. Make sure Robelf is listening. 3. 4. Say "system setting". Say "number two". Alarm, system sound Music, video sound Panels brightness Robelfs sound Sleep time Note: Those settings here can only use change manually. 32 Robelf Functions 33 Robelf User Manual Wi-Fi Settings You can set or change the Wi-Fi network setting here. Set Time Zone You can change your local time zone here. Voice Commands
"Number three"
To change the Wi-Fi network for Robelf:
1. Say "Hey, Robelf" to wake Robelf up. 2. Make sure Robelf is listening. 3. 4. Say "system setting". Say "number three". Fresh Wi-Fi list Add new network Voice Commands
"Number four"
Say "Hey, Robelf" to wake Robelf up. To change Robelfs time zone:
1. 2. Make sure Robelf is listening. 3. 4. Say "system setting". Say "number four". Note: Those settings here can only use change manually. Note: Those settings here can only use change manually. 34 Robelf Functions 35 Robelf User Manual Sensors You can turn off/on infrared or ultrasonic sensors here. Do Not Disturb You can adjust the brightness of Robelfs LED light according to your needs in order not to be disturbed. Voice Commands
"Number five"
Voice Commands
"Number six"
Say "Hey, Robelf" to wake Robelf up. To turn off/on Robelfs sensors:
1. 2. Make sure Robelf is listening. 3. 4. Say "system setting". Say "number five". Say "Hey, Robelf" to wake Robelf up. To turn off the LED light for Robelf:
1. 2. Make sure Robelf is listening. 3. 4. Say "system setting". Say "number five". Note: Those settings here can only use change manually. Note: Those settings here can only use change manually. 36 Robelf Functions 37 Robelf User Manual Behavior You can install the customized behaviors set from your App or shared by other members here. Developer If you are an authorized developer, you can stall your App here for testing only. Voice Commands
"Number one"
Voice Commands
"Number two"
Say "Hey, Robelf" to wake Robelf up. To install the customized behaviors for Robelf:
1. 2. Make sure Robelf is listening. 3. 4. 5. Say "system setting". Say "next page". Say "number one". Say "Hey, Robelf" to wake Robelf up. To test your won apk on Robelf: (You need to become Robelfs developer first.) 1. 2. Make sure Robelf is listening. 3. 4. 5. Say "system setting". Say "next page". Say "number two". My Behavior Member Shared Behavior 5. The behavior needs to be installed manually in order to function. 5. You need to have the permission to upload your test application to our website back end first, then download and install here. Note: Those settings here can only use change manually. Note: Those settings here can only use change manually. 38 Robelf Functions 39 Robelf User Manual Storage You can check the usage of Robelf here. System Update You can check the updates for software and hardware versions here. Voice Commands
"Number three"
Voice Commands
"Number four"
Say "Hey, Robelf" to wake Robelf up. To check the usage of hard drive on Robelf:
1. 2. Make sure Robelf is listening. 3. 4. 5. Say "system setting". Say "next page". Say "number three". Say "Hey, Robelf" to wake Robelf up. To check the updates for Robelf:
1. 2. Make sure Robelf is listening. 3. 4. 5. Say "system setting". Say "next page". Say "number four". Note: Those settings here can only use change manually. Note: Those settings here can only use change manually. 40 Robelf Functions 41 Robelf User Manual Unbind You unbind the ownership with Robelf and set Robelf to factory settings. Turn off Robelf 1. Press the power button till the Reboot option shows up. Voice Commands
"Number five"
To unbind your ownership with Robelf:
1. Say "Hey, Robelf" to wake Robelf up. 2. Make sure Robelf is listening. 3. 4. Say "system setting" then say "next page". Say "number five". 5. The verification code will be sent to owners App; please enter the code in 5 minutes. 2. Wait patiently till Robelf is completely off. Please note that the touch panel and LED light must both be off. Note: Those settings here can only use change manually. 42 Robelf Functions 43 Robelf User Manual Install Robelf App After installing Robelf App, you can use Robelf functions such as remote control, remote monitoring, video call to your family member and receive notifications from Robelf. Scan QR Code Please find Robelf App on App Store or Google Play or scan the QR Code below to install. Register an Account 1. For the first time use, please register an account.
*This QR Code is for demonstration only. Create Account 2. After creating your account name, please set a password. 3. Enter your mobile phone number to receive the Verification Code. 44 Install Robelf App 45 Robelf User Manual 4. Enter the Verification Code to finish the setup. Bind with Robelf 1. Under "Devices", use the "+" button up right to add a Robelf. 2. You need to scan your QR Code on Robelf to establish the link. 3. You can find your family member QR Code here. 46 Install Robelf App 47 Robelf User Manual 4. After connecting to Robelf, you can rename this Robelf. 5. When the process is done, you will have the access to Robelfs function. 6. You can find all the Robelfs that you App has connected to under Devices section. Robelf App Functions Messages 1 . General Messages The following notifications will be sending to you:
When a family member has connected to Robelf App. Updates are available for Robelf. A missed call from Roblef App. Request for a verification code to unbind Robelf. Request for a disarm password for Robelf under Guard Mode. 48 Install Robelf App 49 Robelf User Manual 2 . Alerts When Robelf detects an unknown face on Guard Mode, you will be receiving a notification. If Robelf is really seeing a stranger, you can use "Emergency Call" to call out for help. If Robelf is not seeing a stranger, you can use "Clear Alarm" to add this person to Safe Alert list. You must be at least Administrator to clear the alarm. Devices 1 . Device List You can see all the devices that have been connected to your App account. 2 . Use Robelf You can use Robelfs function according to your authority level. 50 Robelf App Main Functions 51 Robelf User Manual Account 1 . Account Information You can check and edit your account information and unbind the devices with your account here. 2 . Account Options Here you can edit more App related options. Robelf Device Functions Members You can see all family members from the Robelf you chose. If you are the owner of this Robelf, you are allowed to change members permission here. Manage Permission Owner Administrator Call You can make a video call to the appointed Robelf. 52 Robelf App Main Functions 53 Robelf User Manual Remote You can remote control Robelf to navigate around the house and talk or make a face to the person you see. Behavior Coding You can create your own Robelfs behaviors in order to handle 1 . Behavior List You can see and edit all the customized Robelf behaviors here. Safe Alerts If the safe image has been deleted by the administrator, Robelf will send the Alert notification when she sees this person again. 2 . Edit Behavior Note: The Safe Alerts list can only save up to 100 records. You will need to delete it manually when it has reached the maximum amount. 54 Robelf Device Functions 55 Robelf User Manual 3 . To Trigger an Event There are 2 ways to trigger Robelfs action. If Robelf sees a member or hear the keyword during the time period, she will execute your command. 4 . What Robelf can do:
When See Hear See which family member Hear what keyword or sentence Expression Make a funny face Look Up / Down Move head up/down Behaviors Face Head Hand Say What Robelf should say Turn Left / Right Make head left/right Left Up / Down Right Up / Down Both Up / Down Move left arm up/down Move right arm up/down Move both arm up/down Forward Move forward Body Backward Move back Play Video Play YouTube video Turn Left / Right Turn left/right Make a facial expression When event triggered, Robelf will make the assigned facial expression. During the pre-set time period. When Robelf sees a family member. When Robelf hears a keyword or sentence.
(Special symbols are not supported!) 56 Robelf Device Functions 57 Robelf User Manual Talk What Robelf should say when event triggered. (Special symbols are not supported!) Set a responding sentence. Touch or slide to set distance Body Movements Touch to choose a direction Slide to adjust angle Play Video Robelf only supports YouTube video link. Cope/Paste YouTube URL 58 Robelf Device Functions 59 Robelf User Manual 6. How to edit?
Appendix Add a new behavior When the action is set successfully, the connecting dot will turn to white, otherwise it will stay gray. Drag the blocks to concatenate the events Drag and delete unnecessary blocks Troubleshooting Anytime when Robelf does not function properly, please make sure the network connection is working first. Otherwise, you can follow the two steps below. If none of these can solve your problem, please contact our customer service at +886-2-2797-8660 #9. Malfunction on Obstacle Avoidance or Anti-fall Please go to SystemSensors to check if the infrared sensors or ultrasonic sensors are turned off. If so, try turn it on and see whether the issues have been solved. Reboot Robelf Under the rare circumstances if your Robelf is out of order or crushes down, you can reboot Robelf by pressing the Power Button behind till the Reboot option is shown. Please do not try to take out the battery manually since it might cause the damage. If the reboot cannot solve your problem, try to reset Robelf. Use a sharp object to press the Reset button till the LED light is off, then press the Power Button to turn on Robelf and see if the problem has been solved. 60 Robelf Device Functions 61 Robelf User Manual FCC Federal Communications Commission (FCC) Statement 15.21 You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the users authority to operate the equipment. 15.105(b) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules . Operation is subject to the following two conditions:
1) this device may not cause harmful interference and 2) this device must accept any interference received, including interference that may cause undesired operation of the device. FCC RF Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. Warranty Information This Robotelf product are using manually by Robotelf Technology Co., Ltd. (referred to as
"Robotelf") (Purchaser referred to as "you") is shipped with you when you purchase Robelf (here in after referred to as "product") and is subject to the following terms. Product warranty will be providing by Robotelf company Technical Service Center. Warranty Period This Product warranty period will be valid right after the original purchase date, providing a one-year, two times a year (April and October) services. Please provide the product serial number or the date of purchase certificate when you apply for maintenance, if you cannot provide the original proof of the valid purchase of this product, the warranty period starts with the date of the factory. Terms of Use Robotelf warranty terms, only applicable to the purchase of the company's products through the legal sales channels of consumers, this warranty clause is independent of any of the products you buy the application of the warranty, and not in any way affect the statutory warranty maintenance. 1 . Overview If this product is in Warranty period, and it appear failure by normal use, Robotelf will provide free repair or replacement based on the warranty service. Robotelf will test the product as to know whether it needs to be repaired or replaced the problem components, or the product itself. The product or component will be replaced by an equivalent specification or substitute. This warranty only applies to new products from the original date of purchase, please keep the original purchase invoices for future maintenance services. For the damages caused by accidents, natural disasters, operation errors, man-made injuries and unauthorized demolition, maintenance, alteration or by Robotelf proved to be not the original production of formal products, we will not accept the maintains application or provide warranty services. 62 Troubleshooting 63 Robelf User Manual 2 . User Responsibility Using Robelf Please read the manual and follow the instructions in this manual to use this product. For Troubleshooting, please refer to the manual and follow the instruction. Contact Robotelf Customer Service Before contacting Robotelf Technical support, if circumstances permit, please confirm that you have opened the product and placed it in front of you. Please also prepare the product serial number, model name and valid purchase invoice voucher Robotelf Company needs your support to troubleshoot the product, and you may be asked to do the following action:
(a) Restore the product's operating system, drivers, and applications to the factory setting.
(b) Install firmware updates or upgrade kits.
(c) Allow Robotelf technical supporter to access products through remote diagnostics tools.
(d) Perform other reasonable actions required by Robotelf Technical supporter to assist you to identifying or resolving problems. Please attach a copy of the full warranty card and the purchase receipt or the copy of the invoice (Robotelf reserves the right to provide the original document), if you do not provide the confirmation of the document, the warranty period will be recorded by Robotelf from the Date of manufacture. 3 . Warranty Qualifying Terms Robotelf does not guarantee this product an error-free operation. This warranty service only includes failures or malfunctions that occur during the warranty period and in normal use situation. The above warranty terms will be subject to the following conditions and restrictions:
(a) This product is changed, expanded, dismantled, repaired or refitted by non-Robotelf Service Center;
(b) Warranty sticker is damaged or being changed, warranty identification label is torn or damaged.
(c) The warranty number is inconsistent or the serial number is ambiguous or missing;
(d) The product has been scrapped or damaged;
(e) Changes the appearance of the product (accidental or otherwise) but has no effect on the product's operating process and performance. such as rust, scratches, change color, texture decoration, natural worn and the gradual aging of products;
(f) Damage caused by physical or electronically and electromagnetic pressure or interference, war or terrorism, lightning, electrostatic, fire, natural disasters, toxic substances, pests, radiation, intentional or unintentional misuse, negligence, non-OEM maintenance, or other factors of force majeure;
(g) Damage caused by the use of non-original fittings or unsuitable devices;
(h) Failure to operate in accordance with manual operation or not defined within the scope of application, including pressure, broken, damp, soaking, rain, damaged by outer pressure, loss of 0 components, etc.;
(i) Damage to the products caused by third party software, computer viruses or detoxification, and loss of software and data messages resulting from maintenance or replacement;
(j) Fraud, theft, unwarranted disappearance, and other deliberate acts;
(k) Damage or loss due to improper shipping and packaging during the customer's delivery. Liability Restrictions 4 . With the exception of this warranty and the maximum degree of legality, Li Yang is not responsible for any direct, special, incidental, indirect or consequential damages in violation of warranty or other legal discourse. including but not limited to the use of loss, loss of tax, actual or expected income (including loss of contract income), loss of money, loss of deposit, loss of business, opportunity loss, loss of goodwill, loss of reputation, loss of data damage, any consequential loss or damage caused by replacement devices and property, any cost incurred by restoring the data that is stored or used on the product. Nothing in this article removes or restricts the legal liability of rayon for fraud, misrepresentation, death or personal injury, or any intentional or gross negligence, caused by the negligence (such as the relevant legal requirement). Please note that some of the contents of this section may not apply to some jurisdictions, so the above limitation or exclusion clause may not apply to you. 64 Warranty Information 65 Robelf User Manual Expired Cases 5 . When you purchase a product that exceeds the warranty period service, or if you are still trying to deliver the product to us when the warranty is not applicable. The company is still available, but the related maintenance and replacement of the service costs will be needed, maintenance costs will be confirmed by the maintenance Business Department, which will inform you once the service fee is confirm. We will start repair your product after you agree the charging. For the old goods, lack of components to repair, please forgive us for reject the repair application. Robotelf Technology Co., Ltd. retains the Robotelf Product Service information interpretation of the right to explain. If you would like to refer to the latest applicable and complete Robotelf product service information, we suggest you contact Robotelf Product Technical Support line
+886-2-2797-8660 #9. This warranty is provided by:
Taiwan and other areas: Robotelf Technology Co ., Ltd 8F.-3, No.408, Ruiguang Rd., Neihu Dist., Taipei City 114, Taiwan (R.O.C.) Tel: +886-2-797-8660 Email: support@robelf.com China area: Robotelf Technologies (Chengdu) Co ., Ltd . N3-4-1-1914, Global Center, No. 1700, Tianfu Road North, High-rech Zone, Chengdu Ctiy, Sichuan Tel: +86-28-68731381 Warranty Card Name (Mr./Ms.):
Contact Phone:
Contact Address:
E-mail:
Purchase Date:
/
/
(M/D/Y) Distributor:
Distributor Phone:
Distributor Address:
Barcode Sticker ImportantPlease keep this card in good hands. 66 Warranty Information 67 Robelf User Manual
1 2 3 4 | Internal Photos | Internal Photos | 696.61 KiB | March 07 2018 |
Page: 1 of 4 INTERNAL PHOTOGRAPHS OF EUT Open View of EUT 1 Open View of EUT 2 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 90 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for elec-
tronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or ap-
pearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,WuKungRoad,NewTaipeiIndustrialPark,WukuDistrict,NewTaipeiCity,Taiwan24803/ 134 t (886-2) 2299-3279 f (886-2) 2298-0488 www.tw.sgs.com Member of SGS Group Page: 2 of 4 Internal View of EUT 1 Internal View of EUT 2 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 90 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for elec-
tronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or ap-
pearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,WuKungRoad,NewTaipeiIndustrialPark,WukuDistrict,NewTaipeiCity,Taiwan24803/ 134 t (886-2) 2299-3279 f (886-2) 2298-0488 www.tw.sgs.com Member of SGS Group Page: 3 of 4 Internal View of EUT 3 Internal View of EUT 4 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 90 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for elec-
tronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or ap-
pearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,WuKungRoad,NewTaipeiIndustrialPark,WukuDistrict,NewTaipeiCity,Taiwan24803/ 134 t (886-2) 2299-3279 f (886-2) 2298-0488 www.tw.sgs.com Member of SGS Group Page: 4 of 4 Antenna Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 90 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for elec-
tronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or ap-
pearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,WuKungRoad,NewTaipeiIndustrialPark,WukuDistrict,NewTaipeiCity,Taiwan24803/ 134 t (886-2) 2299-3279 f (886-2) 2298-0488 www.tw.sgs.com Member of SGS Group
1 2 3 4 | External Photos | External Photos | 778.91 KiB | March 07 2018 |
Page: 1 of 4 EXTERNAL PHOTOGRAPHS OF EUT All View of EUT Front View of EUT Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 90 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for elec-
tronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or ap-
pearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,WuKungRoad,NewTaipeiIndustrialPark,WukuDistrict,NewTaipeiCity,Taiwan24803/ 134 t (886-2) 2299-3279 f (886-2) 2298-0488 www.tw.sgs.com Member of SGS Group Page: 2 of 4 Back View of EUT Side View of EUT 1 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 90 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for elec-
tronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or ap-
pearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,WuKungRoad,NewTaipeiIndustrialPark,WukuDistrict,NewTaipeiCity,Taiwan24803/ 134 t (886-2) 2299-3279 f (886-2) 2298-0488 www.tw.sgs.com Member of SGS Group Page: 3 of 4 Side View of EUT 2 Side View of EUT 3 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 90 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for elec-
tronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or ap-
pearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,WuKungRoad,NewTaipeiIndustrialPark,WukuDistrict,NewTaipeiCity,Taiwan24803/ 134 t (886-2) 2299-3279 f (886-2) 2298-0488 www.tw.sgs.com Member of SGS Group Page: 4 of 4 Side View of EUT 4 Adapter Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 90 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for elec-
tronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or ap-
pearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,WuKungRoad,NewTaipeiIndustrialPark,WukuDistrict,NewTaipeiCity,Taiwan24803/ 134 t (886-2) 2299-3279 f (886-2) 2298-0488 www.tw.sgs.com Member of SGS Group
1 2 3 4 | ID Label/Location Info | ID Label/Location Info | 114.79 KiB | March 07 2018 / April 07 2018 |
Robel f . Robelf Smart Robot Ee. Type Model/ 288 : RBEOO1 SBE Power Rating/@iR: 20V = 2.0A Aa FCC ID: 2APLA-RBE001 Sh. ERRERSERH. RERNS HEE: E/xooomnxxx CAN ICES-3(BYNMB-3(B) This device complies with Part 15 of the FCC Rules. Operation is subject to the following twoconditions:(1) _|] HAZARDOUS Move PARTS KEEP FINGERS AND
{this device may not cause harmful interference, and(2) ATION this device must accept any interference received, LES PARTIES DANGEREUSES EN MOUVEMENT including interference that may cause undesired operation. || ELOIGNEZ VOS DOIGTS ET AUTRES PARTIES DU CROPS Voir le manuel d'utilisateur pour les courants dalimentation applicable. For applicable power supplies see user manual. Robotelf Technologies (Chengdu) Co., Ltd. 4F., No.89, Minshan St., Neihu Dist., Taipei City 114, Taiwan, R.0.C. Q40GR001-093-01A
+ = ANA/Date of Manufacture: 2018.05.03 FF5l&/Serial Number: RB118A0100001
1 2 3 4 | Confidentiality | Cover Letter(s) | 479.50 KiB | March 07 2018 / April 07 2018 |
FCC, Request for non-disclosure Date: 16-Jul-10 RF_501, Issue 6 Page 1 of 1 Company Name: Robotelf Technologies Co., Ltd Address: 8F.-3, No.408, Ruiguang Rd., Neihu Dist. City: Taipei city Country: Taiwan To: Telefication B.V., Dept. FCC TCB Edisonstraat 12A 6902 PK ZEVENAAR The Netherlands Subject: Request for confidentiality FCC ID: 2APLA-RBE001 Reference number: ##44###
Dear FCC TCB, 1. Long-Term Confidentiality Pursuant to 47 CFR Section 0.459(a) & (b), we hereby requests non-disclosure and confidential treatment of the following materials submitted in support of FCC certification application:
[] Bill(s) of Material XX] Block Diagrams XX] Operational Description [Xx] Schematic Diagrams [_] Tune-up Procedure Above materials contain secrets, proprietary and technical information, which would customarily be guarded from competitors under 47 CFR, section 0.457(d)(2). Disclosure or publication or any portion of this company confidential material to other parties could cause substantial competitive harm and provide unjustified benefits for competitors. 2. Short-Term Confidentiality (STC) Pursuant to Public Notice DA 04-1705 of the Commission's policy, in order to comply with the marketing regulations in 47 CFR 2.803 and the importation rules in 47 CFR 2.1204, applicant hereby requests Short-Term Confidential treatment of the following materials (note 1):
>] Internal Photos [Xx] Users Manual XX] Test Set-up Photos External Photos Planned Release Date STC: 180 days (notes 2, 3, 4, 5) Date: 06/06/2018 Name and signature of applicant:
Qk 9 Tea Notes:
1) A document or type of document can only have ONE type of confidentiality!
2) Short-Term confidentiality is in principle for 45 days from date of grant; it can be extended max 3 times (total time 180 days max.)!
3) FCC must be informed when marketing begins earlier. 4) Release takes place automatically thus extension must be requested in time. Telefication does not remind you of this!
5) Request for extension or for release must be received by Telefication at least 7 days before date of actual marketing or before expiration of the STC period
1 2 3 4 | Declaration of Conformity FCC subpart 15B | Cover Letter(s) | 376.17 KiB | March 07 2018 / April 07 2018 |
ROBOTELF TECHNOLOGIES Co., Ltd. DECLARATION OF CONFORMITY (DoC) Equipment: Robelf Smart Robot Trademark(s) and Model(s): Robotelf Technologies Co., Ltd / RBEOO1 Manufacturer. TOP VICTORY ELECTORONICS(TAIWAN) CO., LTD FCC ID in case other parts of this 2APLA-RBE001 equipment are subject to certification:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. The following test reports are subject to this declaration:
Test report number: Issue date: Test Lab:
FD180502D06 May 11, 2018 Bureau Veritas Consumer Products Services, (H.K.) Ltd., Taoyuan Branch The following manufacturer/importer/entity is responsible for this declaration:
Company name: Robotelf Technologies Co., Ltd Name/Title (legal representative): Adigoo Tsai/ Product Manager Address: 8F.-3, No.408, Ruiguang Rd., Neihu Dist., Taipei city 114, Taiwan (R.O.C) Phone: +886 2 27978660 Fax: +886 2 27975962 E-mail: adigoo@robelf.com Date: t oe 2018/6/14 Signature: VAN \ SA Poteet
1 2 3 4 | Declaration of authorization | Cover Letter(s) | 346.77 KiB | March 07 2018 / April 07 2018 |
RF_ 160, Issue 04
(On manufacturer's company letter heading) Declaration of Authorization We Name: Robotelf Technologies Co., Ltd Address: , 8F.-3, No.408, Ruiguang Rd., Neihu Dist., Taipei city 114, Taiwan (R.O.C) City: Taipei Country: Taiwan Declare that:
Name Representative of agent: Jim Chang ?
Agent Company name: SGS Taiwan Ltd. Address: 134, Wu Kung Road, Wu ku Industrial Zone TW- New Taipei City 24803 City: New Taipei City Country: Taiwan is authorized to apply for Certification of the following product(s):
Product description: Robelf Smart Robot Type designation: | RBEOO1 Trademark: Robotelf Technologies Co., Ltd Validity/ expiry date on our behalf. Date: 2018/6/6 City: Taipei city Name: Adigoo Tsai Function: Product Manager Signature: AS (sen Notes:
(1): Required for FCC application
(2): For FCC it must be the Grantee Code owner or the authorized agent.
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2018-07-04 | JBP - Part 15 Class B Computing Device Peripheral | Original Equipment | |
2 | 5745 ~ 5825 | NII - Unlicensed National Information Infrastructure TX | ||
3 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | ||
4 | 2412 ~ 2462 | DTS - Digital Transmission System |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 2 3 4 | Effective |
2018-07-04
|
||||
1 2 3 4 | Applicant's complete, legal business name |
Robotelf Technologies Co., Ltd
|
||||
1 2 3 4 | FCC Registration Number (FRN) |
0027444645
|
||||
1 2 3 4 | Physical Address |
8F.-3, No.408, Ruiguang Rd., Neihu Dist.
|
||||
1 2 3 4 |
Taipei city, N/A
|
|||||
1 2 3 4 |
Taiwan
|
|||||
app s | TCB Information | |||||
1 2 3 4 | TCB Application Email Address |
c******@telefication.com
|
||||
1 2 3 4 | TCB Scope |
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
||||
1 2 3 4 |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
|||||
app s | FCC ID | |||||
1 2 3 4 | Grantee Code |
2APLA
|
||||
1 2 3 4 | Equipment Product Code |
RBE001
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 2 3 4 | Name |
A****** T******
|
||||
1 2 3 4 | Title |
Product Manager
|
||||
1 2 3 4 | Telephone Number |
88622********
|
||||
1 2 3 4 | Fax Number |
88622********
|
||||
1 2 3 4 |
a******@robelf.com
|
|||||
app s | Technical Contact | |||||
1 2 3 4 | Firm Name |
SGS Taiwan Ltd.
|
||||
1 2 3 4 | Name |
J**** C******
|
||||
1 2 3 4 | Physical Address |
134, Wu Kung Road, Wuku Industrial Zone
|
||||
1 2 3 4 |
Taiwan
|
|||||
1 2 3 4 | Telephone Number |
88622******** Extension:
|
||||
1 2 3 4 | Fax Number |
88622********
|
||||
1 2 3 4 |
J******@sgs.com
|
|||||
app s | Non Technical Contact | |||||
1 2 3 4 | Firm Name |
SGS Taiwan Ltd.
|
||||
1 2 3 4 | Name |
J****** C****
|
||||
1 2 3 4 | Physical Address |
134, Wu Kung Road, Wuku Industrial Zone
|
||||
1 2 3 4 |
Taiwan
|
|||||
1 2 3 4 | Telephone Number |
88622******** Extension:
|
||||
1 2 3 4 | Fax Number |
88622********
|
||||
1 2 3 4 |
J******@sgs.com
|
|||||
app s | Confidentiality (long or short term) | |||||
1 2 3 4 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 2 3 4 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 2 3 4 | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 12/31/2018 | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 2 3 4 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 2 3 4 | Equipment Class | JBP - Part 15 Class B Computing Device Peripheral | ||||
1 2 3 4 | NII - Unlicensed National Information Infrastructure TX | |||||
1 2 3 4 | DSS - Part 15 Spread Spectrum Transmitter | |||||
1 2 3 4 | DTS - Digital Transmission System | |||||
1 2 3 4 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Robelf Smart Robot | ||||
1 2 3 4 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 2 3 4 | Modular Equipment Type | Does not apply | ||||
1 2 3 4 | Purpose / Application is for | Original Equipment | ||||
1 2 3 4 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | Yes | ||||
1 2 3 4 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 2 3 4 | Grant Comments | Power output listed is conducted. The device with its internal antenna must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users must be provided with operating conditions for satisfying RF exposure compliance. This device operates with 20/40 MHz BW. | ||||
1 2 3 4 | Power output listed is conducted. The device with its internal antenna must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users must be provided with operating conditions for satisfying RF exposure compliance. | |||||
1 2 3 4 | Power output listed is conducted. The device with its internal antenna must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users must be provided with operating conditions for satisfying RF exposure compliance. This device operates with 20/40 MHz BW. | |||||
1 2 3 4 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 2 3 4 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 2 3 4 | Firm Name |
SGS Taiwan Ltd. Electronics & Communication Lab
|
||||
1 2 3 4 | Name |
R******** W********
|
||||
1 2 3 4 | Telephone Number |
+886-******** Extension:
|
||||
1 2 3 4 | Fax Number |
+886-********
|
||||
1 2 3 4 |
r******@sgs.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15B | CC | ||||||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
2 | 1 | 15E | CC | 5180 | 5240 | 0.049 | |||||||||||||||||||||||||||||||||||
2 | 2 | 15E | CC ND | 5260 | 5320 | 0.046 | |||||||||||||||||||||||||||||||||||
2 | 3 | 15E | CC ND | 5500 | 5700 | 0.048 | |||||||||||||||||||||||||||||||||||
2 | 4 | 15E | CC | 5745 | 5825 | 0.039 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
3 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0016000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
4 | 1 | 15C | CC | 2402 | 2480 | 0.0018 | |||||||||||||||||||||||||||||||||||
4 | 2 | 15C | CC | 2412 | 2462 | 0.17 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC