To Use Unscrew protective cap to expose sensors MOISTURE METER ENHMM01 Turn on the Bluetooth switch and connect with the App Press the button at the bottom of the product. When the indicator ashes, then the products Bluetooth connection is successful and displayed on your phone Touch the metal probe to an area of skin, click on the site test on your phones display. When the indicator lights turn on, testing is underway 5 seconds later the test results are shown in your phones App Warnings:
This device complies with Industry Canadas licence-exempt RSSs Operation is subject to the following two conditions:
(1) This device may not cause interference and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.L'exploitation est autorise aux deux conditions suivantes :
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. SPECIFICATIONS:
Power supply: 1 x CR2032 /3 V Capacity: 300mAh Communication distance: above 5 m Design size: 30 x 68 x 20.5mm Weight: 19g This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help. For iOS 7 and above for iPod Touch, iPhone or iPad. Bluetooth 4.0. For Android 4.3 and above (Support for Android 4.3 or below after upgrading). Bluetooth 4.0. Dist. Rodan & Fields, LLC San Francisco, CA 94105 Produced in USA with Domestic and Foreign Ingredients AAWA125 8502-02-0038 (6002-02-5063) Please Recycle US: QUESTIONS OR COMMENTS 1-888-995-5656 visit rodanandelds.com AUS: QUESTIONS OR COMMENTS 1800 731 860 visit rodanandelds.com.au