FCC ID: 2AEAN-RCPII RODECASTER PRO II (Integrated Audio Production Studio)

QUICK START GUIDE CONNECTIONS Connect your RDECaster PRO II as follows:

Plug the included USB-C power adaptor into the power connector (1) Use the included USB-C cable to connect USB1 (2) to your computer A microSD card can be inserted into the socket (3) if required. The unit can be connected to an ethernet network using the CAT5 (4) socket if required. Additional UISB devices (eg USB storage devices, mobile phoens etc) can be connected to the USB2 connector (5). Additional cables (eg RDE SC15 or 16) may be required Headphones should be connected to the headphone outputs (6). Up to 4 pairs of headphones can be connected. Monitor speakers can be connected to the Line Out (7) if required. Microphones and / or musical instruments are connected to the XLR Combi inputs (8). POWERING THE UNIT ON AND OFF To turn the unit on, press the red power button on the left of the back panel. To turn the unit off, press this button again, and then follow the prompts on the screen of the unit. CONNECTING TO A NETWORK To connect the unit to a network, either:

1) Use an ethernet cable to connect the unit to a network router 2) Connect the unit to WiFi by following the on-screen prompts FRONT PANEL CONTROLS 1) Multi-function touch screen 2) Record button. Press to start a recording. Press again to stop the recording. 3) Channel access button. Press to access channel functions for each fader. 4) Faders. Slide up and down to control the volume of each audio source. 5) Mute and solo buttons. Use to mute a specific channel, and to listen to a specific channel in headphone output 1. 6) Headphone volume controls. 7) Rotary encoder. Use to alter parameter values in conjunction with the multi-function touch screen 8) SMART pads. Press to trigger sounds and other actions. 9) Pad bank controls. Use to switch between pages of SMART pads. REGULATORY AND SAFETY GUIDE Leitfaden fr Sicherheit und Vorschriften Manufacturer: R DE Address: 107 Carnarvon Street, Silverwater, NSW 2128 Australia EU Importer: R DE EU Address: Neukirchner Str. 18, 65510 Hnstetten, Germany UK Importer: R DE UK Address: Unit A, 23-25 Sunbeam Rd, London NW10 6JP, United Kingdom Important Safety Information 1. Read and understand the instructions and safety guide completely before using the product. 2. Ensure both the instruction manual and regulatory and safety guide are accessible to all users, including when passing the product on to third parties. 3. Only use this product with authorized RDE accessories. 4. Do not open the product housing. This will avoid the warranty. 5. Refer all service and repairs to RDE-approved service personnel. Service or repair is required for products that have been damaged, exposed to liquid, rain or moisture, or do not operate normally. 6. Use the product only in the ways described in the instructions. 7. Do not use the product if it was damaged during transportation. 8. Keep the product away from liquids and electrically conductive objects that are not necessary for the operation. 9. Do not use any solvents or corrosive cleaning agents to clean the product. 10. Do not adjust the control of the product in an environment that requires your attention

(Operating machinery, driving, etc.). 11. Battery cannot be subjected to high or low extreme temperatures, low air pressure at high altitude during use, storage or transportation. 12. Replacement of a battery with an incorrect type that can result in an explosion or the leakage of flammable liquid or gas. 13. Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion. 14. Leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas. 15. A battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas. Wichtige Sicherheitsinformationen 1. Die Anweisungen und der Sicherheitsleitfaden sind vor der Verwendung des Produkts vollstndig zu lesen und zu beachten. 2. Stellen Sie sicher, dass sowohl die Betriebsanleitung als auch der Leitfaden fr Vorschriften und Sicherheit fr alle Benutzer zugnglich sind, auch bei Weitergabe des Produkts an Dritte. 3. Verwenden Sie dieses Produkt nur mit autorisiertem RDE-Zubehr. 4. ffnen Sie das Produktgehuse nicht. Dadurch entfllt die Garantie. 5. berlassen Sie alle Service- und Reparaturarbeiten von RDE autorisiertem Servicepersonal. Bei Produkten, die beschdigt wurden; die Flssigkeit, Regen oder Feuchtigkeit ausgesetzt waren; oder die nicht normal funktionieren, ist eine Wartung oder Reparatur erforderlich. 6. Verwenden Sie das Produkt nur auf die in der Anleitung beschriebene Weise. 7. Verwenden Sie das Produkt nicht, wenn es beim Transport beschdigt wurde. 8. Halten Sie das Produkt von Flssigkeiten und elektrisch leitenden Gegenstnden fern, die fr den Betrieb nicht erforderlich sind. 9. Verwenden Sie zur Reinigung des Produkts keine Lsungsmittel oder tzende Reinigungsmittel. 10. Nehmen Sie keine Einstellungen am Produkt vor, wenn Sie in einer Umgebung sind, die Ihre Aufmerksamkeit erfordert (Bedienung von Maschinen, Autofahren usw.). 11. Die Batterie darf whrend des Gebrauchs, der Lagerung oder des Transports keinen extremen Temperaturen, niedrigem Luftdruck oder groer Hhe ausgesetzt werden. 12. Das Ersetzen einer Batterie durch einen falschen Typ kann zu einer Explosion oder zum Austritt von brennbarer Flssigkeit oder Gas fhren. 13. Das Wegwerfen einer Batterie ins Feuer oder in einen heien Ofen oder mechanisches Zerkleinern oder Zerschneiden einer Batterie kann zu einer Explosion fhren. 14. Wenn Sie die Batterie extrem hohen Temperaturen aussetzen, kann dies zu einer Explosion oder zum Austreten von entflammbaren Flssigkeiten oder Gasen fhren. 15. Wenn Sie die Batterie extrem niedrigem Luftdruck aussetzen, kann dies zu einer Explosion oder zum Austreten von brennbaren Flssigkeiten oder Gasen fhren. North America The RDE Caster Pro II must not be co-located or operated in conjunction with any other antenna or transmitter. The device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are design to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of more of the following measures:

1. Reorient or relocate the receiving antenna. 2. 3. Connect the equipment into an outlet on a circuit different from that to with the receiver is Increase the separation between the equipment and receiver. connected. 4. Consult the dealer or an experienced radio/TV technician for help. This equipment complies with FCC radiation exposure limits set forth an uncontrolled environment. Changes or modifications not expressly approved by RDE could void the users authority to operate the equipment. This device is acting as slave and operating in the 2.4GHz (2412-2462 MHz) and 5GHz (5150-5850 MHz) band. Ad Hoc function is supported but not able to operate on non-US frequencies. This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas license-exempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause interference. 2. This device must accept any interference, including interference that may cause undesired operation of the device. Lmetteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme aux CNR dInnovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :

(1) Lappareil ne doit pas produire de brouillage ;

(2) Lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment shall be installed and operated with minimum distance 20cm between the radiator &

body. Radio Frequency Exposure Statement for Canada The device has been evaluated to meet general RF exposure requirements. The device can be used in mobile exposure conditions. The min separation distance is 20cm. Dclaration d'exposition aux radiofrquences pour IC L'appareil a t valu pour rpondre aux exigences gnrales en matire d'exposition aux RF. L'appareil peut tre utilis dans des conditions d'exposition mobiles. La distance de sparation minimale est de 20cm. Operation of this device is restricted to indoor use only. (W52 band) Le fonctionnement de cet appareil est limit une utilisation en intrieur uniquement. (W52 band) For USA: The frequency stability of all transmission frequencies of U-NII-1, U-NII 2A, U-NII 2C and U-

NII-3 meets the requirements of 47 CFR FCC Part15.407(g), and the manufacturer declares that their transmission is maintained at Band U-NII-1, U-NII 2A, U-NII 2C and U-NII-3. For Canada: The frequency stability of all transmission frequencies of U-NII-1, U-NII 2A, U-NII 2C and U-NII-3 meets the 47 CFR FCC Part15.407(g) requirements, and the manufacturer states that their transmissions remain within the U-NII-1, U-NII 2A, U-NII 2C and U-NII-3 bands. Pour le Canada : La stabilit de frquence de toutes les frquences de transmission de U-NII-1, U-NII 2A, U-NII 2C et U-NII-3 est conforme aux exigences 47 CFR FCC Part15.407(g), et le fabricant dclare que leurs transmissions restent dans les bandes U-NII-1, U-NII 2A, U-NII 2C et U-NII-3. EU Compliance Statement R DE hereby declares that the R DECaster Pro II is in compliance with Radio Directive 2014/53/EU. A copy of the declaration of conformity is available at http://www.rode.com/

For details of EU representative go to http://en.rode.com/distributors Operating Frequency Range Bluetooth 2402 2480 MHz The maximum RF Output Power 3.68 dBm (BR/EDR) 4.59 dBm (BLE) EIRP WiFi 2412 2472 MHz 15.99 dBm EIRP WiFi 5150-5250 MHz 16.71 dBm EIRP WiFi 5250-5350 MHz 16.71 dBm EIRP WiFi 5470-5725 MHz 16.71 dBm EIRP WiFi 5725-5850 MHz 14 dBm EIRP 2.4G SRD 2402-2480 MHz 1.19 dBm EIRP Caution The R DECaster Pro II has been designed to be used with the provided power supply, as use the provided power supply only. Stop using the power supply unit and any cables if:

1. There is any damage to the charging port, power connector or power cord. 2. The power supply unit is exposed to excessive moisture, or liquids is spilled into the power supply unit. 3. The power supply unit enclosure is broken. Power Supply Unit Specifications Model Name: YDSPD030/YDS-PD030/YDS-PD030A Frequency: 50-60 Hz Line Voltage: 100-240 V Output Ratings: 20V 1.5A; 15V 2.0A; 12V 2.5A; 9V 3A; 5V 3A TAIWAN Note: For regulatory information such as identification numbers go to Settings > System > Information > View Device Information > Compliance & Regulatory UK USA FCC ID: 2AEAN-RCPII CANADA IC: 20091-RCPII AS/NZS SOUTH KOREA ID: R-R-R72-RCP-II Company Name: RDE Model: R DECaster Pro II Country of Origin: Australia TAIWAN JAPAN

[Include Logo and ID]

To prevent possible hearing damage, do not listen at high volume levels for long periods.

FCC ID and IC Label Location 35mm*30mm FCC ID: 2AEAN-RCPII IC: 20091-RCPII HVIN: RODECASTER PRO II

Rode Microphones 107 Carnarvon Street, Silverwater, 2128, Australia Agent Authorization Company: Rode Microphones Address: 107 Carnarvon Street, Silverwater, 2128, Australia Product Name: RODECASTER PRO II (Integrated Audio Production Studio) Model Number(s): RODECASTER PRO II Product Description: RODECASTER PRO II (Integrated Audio Production Studio) We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature:

Date: May 07, 2022 Name:

Pieter Schillbeeckx Title:

Head of New Product Development Company: Rode Microphones

Rode Microphones 107 Carnarvon Street, Silverwater, 2128, Australia Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: May 07, 2022 Subject: Declaration Operating Channel Limitation FCC ID: GSS-VS18188 To Whom it may concern, This device is acting as slave/client device under the control of a master. The operating channels in 802.11 b/g/n mode for this device marketed to the US are firmware limited to channel 1 ~ 11 (2412 ~ 2462 MHz). The end-user has no possibility to select any other operating channels. If you have any questions, please feel free to contact me. Thank you. Sincerely, Signatory Rode Microphones Contact person: Pieter Schillbeeckx Title: Head of New Product Development

JUSLUGOJSAeq] ONPOJd MeN JO peasy eh XYOSeq|IIYOS Ja}slq :aweN Fr nee a aa eat ceremonial aunjyeuBis K[QIBOUIS panssi si uonezuoujne jusUdINbe Jo jueIB ay} BOUO MBSIASI DI}qQNd JoOj aiqeleae aq ||IM UONEWUOJUI sI4} pue S}JUsUUNDOp

[el}UspyuCS se pejueJB aq JoUuUeD Ssed0id MBIASI UOI}EOYIeO BY} BuLNnp souUspUOodsalOO pue JEWO} jaqge| G| OD soda se} JUSWIaJNSeew |e yeu} Bulpueyssapun Jno si}

"LOG OZ697Z Gay 0} }Uensund sep og} Jo4 KX]

YO GOLL-7O WC S91}0N S1GNdq 0} JUeNSINd skep Gy 104 [|

jenuew Jesr [Xx]

SO}JOUd JeUa}U] fx]

SO}OUd Anas }se] |X]

SO}JOUd Jeula}xy [x]

(s)jusuyoeye Bulmoyjo} suj jo AyenuspyUuCD Ws] WOUS senbe em ssdlAep peziuoyjne A\mau jo Buljeysew jenyoe au} |IUN jeNUSPYUOS SUITES! UO}ELUOJU! SAI}ISUSS SSeUISNg yeu} Oulinsus alum pOTL'Z YAO Zp SHILL Ul Sains UOeLOdW! eu} pue 0g'z HAO Zy SMILL ul suoe|nBes Buyeyiew 94} YIM A|dWO09 0} JaplO Ul S}USLUNDOP PSUOI]USLU SAOge 0} |eUOHIpPpe U]

ys] SHEd X]

uoldiiosaq Ajindeg eiemyos [Xx]

uodiiosaq jeuojessdo IX]

weibeiq y01g [X]

wieiBelq oewayos [Xx]

jewlew uj ul eHeyuenpe slejun ue sJo}jedwio0o SsAiB pjnom pue Auedwod Jno o} jnjueY eg yyBiwW S]JUSLUNDOP Bsa} JO SINSOJOSIp SGnd au] jJUsWdinbe sy} Jo UOessdo Ul UOIFeLUUOJU! AVe}eldoud se paleplsuoo aie pue suoidiosep juswidinbse pue wejsAs payiejep uleyUOO sjuaWuNoOp essay]

AJSHUYOPU! SINSOJOSIP OI]GNd Wo. sjUSsLUNDOp jeluepljuOd se (s)jUsLUYOe}e Buimojjoj SY} P[OUY}M 0} UOISSILULUOD 3u} Huljsenbe aie OM 6G O pue /G'0 SUOI}OES /P SI}LL SAlN S,UOISSILIWIOD OU} JO SUOISIAOJd Ay} 0} JUeNSINd UIe9U0D ABI] }] WOUAA OL WdOY-NVAVZ -dIl DOS Ayjenuepyuoy Joj jsanbey yoelqns Zc07 20 Aew :e}eq Vvsn 9FOLZ CIN elquinjoD PEOY SiN PUeIYeO GErZ UOISSIWIWOD SUOHesIuUNWIWOD jelepe-

ABojouyos | Buu@eulBuz jo solo BIIENSNY 8ZLZ SJEMIBAIIS Yeas UOAIEUUED JO]

ssuoyUdololyy apoy

Rode Microphones 107 Carnarvon Street, Silverwater, 2128, Australia FCC Software Configuration Control Declaration Date: May 07, 2022 Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Attn: OET Dept. Product/ Model Number: RODECASTER PRO II (Integrated Audio Production Studio) / RODECASTER PRO II Regarding FCC Country Code Selection guidelines identified in KDB 594280 D01 v02r01. All applications for equipment authorization for transmitters that can have radio parameters, or other technical parameters, reported to the Commission set by software must have an attestation indicating that no third party will have software, or configuration control, to program the device out of compliance of the technical rules under which it has been certified. We declare that no third party will have software, or configuration control, to program the device out of compliance of the technical rules under which it has been certified. Name: Pieter Schillbeeckx Title: Head of New Product Development Signature of applicant FCC Software Configuration Control Declaration Rev1.1