companies    

FCC ID: SOP424151A IEEE 802.11 a/b/g/n 1T1R WLAN and Bluetooth Low Energy Microcontroller Module

by: Roland Corporation latest update: 2021-06-10 model: 424151A

Four grants have been issued under this FCC ID from 04/29/2021 to 06/10/2021 (this is one of six releases in 2021 for this grantee). Public details available include internal & external photos, frequency information, and manuals. some products also feature user submitted or linked drivers, instructions, password defaults, troubleshooting guides, & warrantee terms.
permalink for this FCC identifier
search for: Repair details
from iFixIt
 Replacement
on Amazon
 Trade-in? Recycling locations
eg is reader-supported. when you buy through links on our site, we may earn an affiliate commission.
|
|
|   
eg for Slack usage
all frequencies exhibits applications
manual photos labels
app s submitted / available
1 2 3 4 Users Manual Users Manual pdf 2.32 MiB June 10 2021 / December 07 2021 delayed release
1 2 3 4 Internal photos Internal Photos pdf 2.36 MiB June 10 2021 / December 07 2021 delayed release
1 2 3 4 External photos External Photos pdf 1.09 MiB June 10 2021 / December 07 2021 delayed release
1 2 3 4 Label Location ID Label/Location Info pdf 8.62 KiB June 10 2021
1 2 3 4 Label Sample (AW-CU108) ID Label/Location Info pdf 243.55 KiB June 10 2021
1 2 3 4 Label Sample (WC-1) ID Label/Location Info pdf 252.93 KiB June 10 2021
1 2 3 4 Label sample and label location rev ID Label/Location Info pdf 199.68 KiB April 29 2021
1 2 3 4 Agent Authorization Cover Letter(s) pdf 141.66 KiB June 10 2021
1 2 3 4 Confidentiality Request (Short term) Cover Letter(s) pdf 127.50 KiB June 10 2021
1 2 3 4 Description of Change rev2 Cover Letter(s) pdf 361.31 KiB June 10 2021
1 2 3 4 RF Exposure Info (SAR) rev2 RF Exposure Info pdf 4.94 MiB June 10 2021
1 2 3 4 Test setup photos (SAR) rev4 Test Setup Photos pdf 750.72 KiB June 10 2021 / December 07 2021 delayed release
1 2 3 4 Change ID Authorization Cover Letter(s) pdf 113.96 KiB April 29 2021
1 2 3 4 Request for Change ID rev Cover Letter(s) pdf 469.04 KiB April 29 2021
1 2 3 4 Users Manual Users Manual pdf 2.32 MiB June 10 2021 / December 07 2021 delayed release
1 2 3 4 Internal photos Internal Photos pdf 2.36 MiB June 10 2021 / December 07 2021 delayed release
1 2 3 4 External photos External Photos pdf 1.09 MiB June 10 2021 / December 07 2021 delayed release
1 2 3 4 Label Location ID Label/Location Info pdf 8.62 KiB June 10 2021
1 2 3 4 Label Sample (AW-CU108) ID Label/Location Info pdf 243.55 KiB June 10 2021
1 2 3 4 Label Sample (WC-1) ID Label/Location Info pdf 252.93 KiB June 10 2021
1 2 3 4 Label sample and label location rev ID Label/Location Info pdf 199.68 KiB April 29 2021
1 2 3 4 Agent Authorization Cover Letter(s) pdf 141.66 KiB June 10 2021
1 2 3 4 Confidentiality Request (Short term) Cover Letter(s) pdf 127.50 KiB June 10 2021
1 2 3 4 Description of Change rev2 Cover Letter(s) pdf 361.31 KiB June 10 2021
1 2 3 4 RF Exposure Info (SAR) rev2 RF Exposure Info pdf 4.94 MiB June 10 2021
1 2 3 4 Test setup photos (SAR) rev4 Test Setup Photos pdf 750.72 KiB June 10 2021 / December 07 2021 delayed release
1 2 3 4 Change ID Authorization Cover Letter(s) pdf 113.96 KiB April 29 2021
1 2 3 4 Request for Change ID rev Cover Letter(s) pdf 469.04 KiB April 29 2021

frequency equipment class purpose
1 2021-06-10 2412 ~ 2462 DTS - Digital Transmission System Class II Permissive Change
2 5260 ~ 5320 NII - Unlicensed National Information Infrastructure TX
3 2021-04-29 2412 ~ 2462 DTS - Digital Transmission System Change in Identification
4 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX

Application Forms

app s Applicant Information
1 2 3 4 Effective 2021-06-10
1 2 3 4 2021-04-29
1 2 3 4 Applicant's complete, legal business name Roland Corporation
1 2 3 4 FCC Registration Number (FRN) 0012075693
1 2 3 4 Physical Address 1-5-3, Shinmiyakoda
1 2 3 4 Kita-ku,Hamamatsu, Sizuoka,, N/A
1 2 3 4 Japan
app s TCB Information
1 2 3 4 TCB Application Email Address c******@nacsemc.com
1 2 3 4 TCB Scope A4: UNII devices & low power transmitters using spread spectrum techniques
app s FCC ID
1 2 3 4 Grantee Code SOP
1 2 3 4 Equipment Product Code 424151A
app s Person at the applicant's address to receive grant or for contact
1 2 3 4 Name H****** N******
1 2 3 4 Title Assistant Manager
1 2 3 4 Telephone Number 81-53********
1 2 3 4 Fax Number 81-53********
1 2 3 4 E-mail H******@roland.com
app s Technical Contact
n/a
app s Non Technical Contact
n/a
app s Confidentiality (long or short term)
1 2 3 4 Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:Yes
1 2 3 4 No
1 2 3 4 Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:Yes
1 2 3 4 If so, specify the short-term confidentiality release date (MM/DD/YYYY format)12/07/2021
1 2 3 4 10/26/2021
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
app s Cognitive Radio & Software Defined Radio, Class, etc
1 2 3 4 Is this application for software defined/cognitive radio authorization?No
1 2 3 4 Equipment ClassDTS - Digital Transmission System
1 2 3 4 NII - Unlicensed National Information Infrastructure TX
1 2 3 4 Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant)IEEE 802.11 a/b/g/n 1T1R WLAN and Bluetooth Low Energy Microcontroller Module
1 2 3 4 Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application?No
1 2 3 4 Modular Equipment TypeSingle Modular Approval
1 2 3 4 Purpose / Application is forClass II Permissive Change
1 2 3 4 Change in Identification
1 2 3 4 Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization?Yes
1 2 3 4 Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?No
1 2 3 4 Grant CommentsClass II Permissive Change for adding one new portable host platform (Brand: Roland, Model: WC-1; Brand: AZUREWAVE, Model: AW-CU108) with NII-2C and NII-3 bands disabled as described in this filing. The highest reported SAR value for body exposure condition is 1.12 W/kg. Power listed is maximum conducted output power. This device supports 20 MHz bandwidth mode for WLAN. Single modular approval for mobile RF exposure conditions. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.
1 2 3 4 Class II Permissive Change for adding one new portable host platform (Brand: Roland, Model: WC-1; Brand : AZUREWAVE, Model: AW-CU108) with NII-2C and NII-3 bands disabled as described in this filing. The highest reported SAR value for body exposure condition is 1.06 W/kg. Power listed is maximum conducted output power. This device supports 20 MHz bandwidth mode. Single modular approval for mobile RF exposure conditions. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.
1 2 3 4 Power listed is maximum conducted output power. This device supports 20 MHz bandwidth mode for WLAN. Single modular approval for mobile RF exposure conditions. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.
1 2 3 4 Power listed is maximum conducted output power. This device supports 20 MHz bandwidth mode. Single modular approval for mobile RF exposure conditions. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.
1 2 3 4 Is there an equipment authorization waiver associated with this application?No
1 2 3 4 If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?No
app s Test Firm Name and Contact Information
1 2 3 4 Firm Name Bureau Veritas CPS(H.K.) Ltd., Taoyuan Branch
1 2 3 4 Name E******** L********
1 2 3 4 Telephone Number +886-********
1 2 3 4 886-3******** Extension:
1 2 3 4 Fax Number +886-********
1 2 3 4 +886-********
1 2 3 4 E-mail e******@tw.bureauveritas.com
Equipment Specifications
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
1 1 15C CC 2412 2462 0.491
1 2 15C CC 2402 2480 0.003
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
2 1 15E CC 5180 5240 0.14
2 2 15E CC ND 5260 5320 0.075
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
3 1 15C CC 2412 2462 0.491
3 2 15C CC 2402 2480 0.003
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
4 1 15E CC 5180 5240 0.14
4 2 15E CC ND 5260 5320 0.075
4 3 15E CC ND 5500 5700 0.078
4 4 15E CC 5745 5825 0.137

 

some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details

 

  This product uses the FCC Data API but is not endorsed or certified by the FCC