all | frequencies |
|
|
|
|
|
exhibits | applications |
---|---|---|---|---|---|---|---|---|
manuals | photos | label |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 2 |
|
User manual Android 2.1 | Users Manual | 2.25 MiB | October 30 2020 | |||
1 2 |
|
User manual iOS 2.1 | Users Manual | 2.03 MiB | October 30 2020 | |||
1 2 |
|
Internal photo Rev1 | Internal Photos | 1.89 MiB | October 30 2020 | |||
1 2 |
|
External photo Rev1 | External Photos | 472.70 KiB | October 30 2020 | |||
1 2 |
|
Label location | ID Label/Location Info | 3.63 MiB | October 30 2020 | |||
1 2 | Confidential Block Diagram | Block Diagram | October 30 2020 | confidential | ||||
1 2 | Confidential Operation Description Rev1 | Operational Description | October 30 2020 | confidential | ||||
1 2 | Confidential Operation Description Rev2 | Operational Description | October 30 2020 | confidential | ||||
1 2 | Confidential Schematic Diagram | Schematics | October 30 2020 | confidential | ||||
1 2 |
|
Declaration letter for channel 12 and 13 | Cover Letter(s) | 30.82 KiB | October 30 2020 | |||
1 2 |
|
FCC Authority Letter | Cover Letter(s) | 48.76 KiB | October 30 2020 | |||
1 2 |
|
FCC Confidentiality Letter | Cover Letter(s) | 77.93 KiB | October 30 2020 | |||
1 2 |
|
Model Differences Declaration | Cover Letter(s) | 27.01 KiB | October 30 2020 | |||
1 2 |
|
Report 15.247-WIFI 1 Rev1 | Test Report | 4.33 MiB | October 30 2020 | |||
1 2 |
|
Report 15.247-WIFI 2 Rev1 | Test Report | 4.87 MiB | October 30 2020 | |||
1 2 |
|
Report 15.247-WIFI 3 Rev1 | Test Report | 2.30 MiB | October 30 2020 | |||
1 2 |
|
Report FCC MPE Rev1 | RF Exposure Info | 297.81 KiB | October 30 2020 | |||
1 2 |
|
Test setup | Test Setup Photos | 627.80 KiB | October 30 2020 | |||
1 2 | RF Exposure Info | October 30 2020 | ||||||
1 2 |
|
Report 15.231 Rev1 | Test Report | 902.07 KiB | October 30 2020 |
1 2 | User manual Android 2.1 | Users Manual | 2.25 MiB | October 30 2020 |
Pulse 2 Hub | Set up Instructions for Android The Pulse 2 connects to home networks to unlock the luxury of automated shade control. Experience customization with scene and timer options as well as voice control via Google Assistant and Amazon Alexa. THE APP ALLOWS FOR:
Individual and group control Group Automate shades by room and conveniently control them accordingly. 1. 2. Remote connectivity - Control shades remotely, whether home or away on a local network or an internet connection. 3. Scene control - Personalize shade control and organize how your shades operate by specific daily events. 4. Timer functionality - Set and forget. Lower, raise and activate shade scenes automatically at the optimal time. 5. Sunrise and Sunset - Utilizing time zone and location, the Pulse 2 can automatically raise or lower Automate shades according to the position of the sun. 6. Compatible IoT Integrations:
IFTTT via applets Amazon Alexa devices
- Google Home Smart Things GETTING STARTED:
To experience automated shade control through the Automate Pulse 2 app, you will need to have:
Downloaded the free app via the Google Play Store. Purchased one or more Hubs depending on the size of the area you would like to cover. Created a Location then pair hub to that location. Our step by step guide will explain in more detail. Familiarized yourself with the app navigation guide below. WI-FI HUB TECHNICAL SPECIFICATIONS:
Radio Frequency range: ~60 feet (no obstructions) Radio Frequency: 433 MHz Wi-Fi 2.4 GHz or Ethernet Connectivity (CAT 5) Power: 5V DC For Indoor Use Only BEST PRACTICES FOR PAIRING THE HUB ON YOUR WIFI NETWORK:
The Hub must be within signal range of both the automated shades and 2.4GHZ Wi-Fi. Ensure 5Ghz are disabled on your Wi-Fi router or disconnected from your mobile device. Only pair your hub via 2.4GHZ Wi-Fi (Lan Pairing is not supported) Do not connect ethernet cable to the hub. Check your phone and confirm if the Home App has been installed. Environments with multiple WAPs (wireless access points) may need all but the main router temporarily disabled. Security settings on your router and on phone may need to be temporarily disabled. Place the Hub in a horizontal position. (avoid metal enclosures / ceiling or any other locations that may affect the range. Before starting the Hub installation, make sure that all your shades are functional and charged. You can test the shade using a remote control or pressing a P1 Button on the motor head. In case of range issues, it is recommended you deploy the antenna or reposition the hub in your installation. Add additional repeaters if is required (Only two per Hub). CAPABILITIES:
Locations per account: 5 Motors per Hub: 30 Hubs per location: 5 Rooms per Location: 30 Scenes per Location: 20 (100 per location) Timers per Location: 20 (100 per location) B. USB Power Supply C. 32 (80cm) USB Power Cord D. Ethernet cable E. Quick Start Guide 1. Unpack the Pulse 2. 2. Check the Box Contents. 3. Plug the USB Cord into the Power Supply 4. Connect the Micro USB end into the back of the Pulse 2 5. Plug the Power Supply into the outlet and place the Hub in a central location in your home. Locations Devices Home Favorite Scenes Timers Home:
Favorites:
Scenes:
Timers:
App Version: 2.0.(13) Shows the main control screen with rooms and devices tabs Allows you to create a list of your favorite Devices or Scenes Show a list of scenes created Show a list of scene timers UNPACKING THE HUB 2.0:
WHATS IN THE BOX?
A. Automate Pulse 2 Hub APP NAVIGATION Home Page Menu Rooms rolleaseacmeda.com 2020 Rollease Acmeda Group SETTING UP:
STEP 1 Open the App STEP 2 Sign Up STEP 3 Sign Up STEP 4 Sign In Email l Email l Email l Open the Automate Pulse 2 mobile App. If required, create a new account. Select Sign Up on the Top Right corner of the screen. Creating an account will require an email address and password. If you already have an account, Log in with your account information. QUICK START SETUP:
NOTE: You cannot pair the hub via the Ethernet cable connection, Wi-Fi only via a 2.4GHZ connection. Refer to troubleshooting for more information. STEP 2 Add Location STEP 1 Quick Start Please power up the Hub then follow the Quick Start guide. Select YES. You can create a name for your location or select Next to use the Default My House. rolleaseacmeda.com 2020 Rollease Acmeda Group STEP 3 - Configure a Hub STEP 4 Time Zone STEP 5 - Configure a Hub STEP 6 - Configure a Hub Wait as the App creates a Location for the Hub. Select your Time Zone. This is important for timers to operate correctly. Ensure daylight savings is enabled. Make sure that your current Wi-Fi Network aligns with the network you want the hub connected to. Open your Wi-Fi settings and connect to the appropriate RA-PULSE-xxx network that corresponds with your hub. STEP 7 - Configure a Hub STEP 8 - Configure a Hub STEP 9 Wi-fi Network STEP 10 - Wi-fi Network Hub Open your Wi-Fi settings and connect to the appropriate RA-PULSE-xxx network that corresponds with your hub. In the app, verify you are connected to your RA_PULSE-xxxx network, press NEXT to pair the hub. Verify if your Wi-Fi network is listed. If it is not, type in the correct network name. Enter your correct Wi-Fi networks password. rolleaseacmeda.com 2020 Rollease Acmeda Group STEP 11 - Configure a Hub STEP 12 - Configure a Hub STEP 13 - Configure a Hub STEP 14 - Finalizing Wait while the hub connects to your Wi-Fi Network. Before selecting NEXT verify the network changes over to your home Wi-Fi network. Select NEXT to continue the setup process. Wait as the hub finalizes the setup. STEP 15 - Pairing Completed The Hub is ready to be used! Press DONE to start the Application. rolleaseacmeda.com 2020 Rollease Acmeda Group ADDING ADDITIONAL HUB TO EXSITING LOCATION:
STEP 1 - Configure a Hub STEP 2 Add a New Hub STEP 3 - Configure a Hub STEP 4 Time Zone Select the location desired to add a new hub to. Click on ADD NEW HUB to start the process to setting up your HUB on the App. Follow on the screen instructions and click on the button to connect to NEW HUB. Select your Time Zone. This is important for timers to operate correctly. Ensure daylight savings is enabled. STEP 5 - Configure a Hub STEP 6 - Configure a Hub STEP 7 - Configure a Hub STEP 8 - Configure a Hub Make sure that your current Wi-Fi Network aligns with the network you want the hub connected to. Open your Wi-Fi settings and connect to the appropriate RA-PULSE-xxx network that corresponds with your hub. Open your Wi-Fi settings and connect to the appropriate RA-PULSE-xxx network that corresponds with your hub. In the app, verify you are connected to your RA_PULSE-xxxx network, press NEXT to pair the hub. rolleaseacmeda.com 2020 Rollease Acmeda Group STEP 9 Wi-fi Network STEP 10 - Wi-fi Network STEP 11 - Configure a Hub STEP 12 - Configure a Hub Verify if your Wi-Fi network is listed. If it is not, type in the correct network name. Enter your correct Wi-Fi networks password. Wait while the hub connects to your Wi-Fi Network. Before selecting NEXT verify the network changes over to your home Wi-Fi network. STEP 13 - Configure a Hub STEP 14 - Finalizing STEP 15 - Pairing Completed Select NEXT to continue the setup process. Wait as the hub finalizes the setup. The Hub is ready to be used! Press DONE to start the Application. rolleaseacmeda.com 2020 Rollease Acmeda Group STEP 2 Add Location STEP 3 Toggle Location Select the default location and update the location name if desired. Select Ok then Done. If you have setup multiple locations, select the Location icon in the upper right corner to toggle between locations. STEP 2 Custom Home Image STEP 3 Custom Home Image STEP 4 Custom Home Image STEP 1 - Add Location CREATING A LOCATION:
ADDING A CUSTOM HOME IMAGE:
Open the App from the home screen and select the menu button, click ADD NEW LOCATION. STEP 1 Custom Home Image From the main menu select the location you wish to change the home image for. Select Change Location Image. Choose to Select Image from Library. You will need to Allow Pulse 2 access to import a picture, Select the image and crop as desired. rolleaseacmeda.com 2020 Rollease Acmeda Group HOW TO PAIR A MOTOR TO THE APP:
During the setup, the hub may need to be moved room to room during the pairing process. We recommend setting up your motors with a remote prior to syncing with the App. STEP 1 Pair a motor STEP 2 Pair a motor STEP 3 Pair a motor STEP 4 Pair a motor On the home screen select DEVICES then select the Plus icon to add a new shade. From the list select the HUB you wish to pair the motor too. Select which device type best represents your shade.. (NOTE this cant be changed later) Make sure the shade device is plugged in or ready to be paired and select NEXT. STEP 5 Pair a motor STEP 6 Pair with Remote STEP 7 Pair with HUB STEP 8 Pair a motor Choose your pairing method: PAIR USING HUB or COPY FROM REMOTE.
*We recommend copying from a remote for the best results. Make sure the remote is tuned to the shades individual channel (not Ch 0). Remove the remote battery cover and press the upper left P2 button Twice, then Next. Press and hold the P1 button on the motor head ~2 seconds. The motor will jog up and down once and you will hear one audible beep. Press PAIR on the app screen. Wait as the app searches for the new device. rolleaseacmeda.com 2020 Rollease Acmeda Group v STEP 9 Pair a motor STEP 10 Shade Details STEP 11 Pair a motor STEP 12 Shade Ready If the pairing process was successful, Press NEXT to finalize pairing. If pairing fails, try the process again. Input a Device Name to customize your treatment name. Press Done to complete setup. The New Device will now be added to the DEVICE tab. Shade is now ready for operation from Pulse 2 App. HOW TO OPERATE SHADES:
STEP 1 Operate Shade STEP 2 - Open a shade STEP 3 - Close a shade STEP 4 - Move a shade rolleaseacmeda.com 2020 Rollease Acmeda Group Select the device that you wish to operate. Close the shade by pressing the Down Arrow icon or scrolling the black line to the bottom. Open the shade by pressing the Up arrow icon or scrolling the black line to the top. Move the shade to the position desired by scrolling the line to any position. Press the stop button to stop the shade anytime. DEVICE INFORMATION:
Battery Device Information Signal Device Information Device Information Top left corner, there is the battery icon This icon has 3 levels. Full, Medium & Low. Top right there is the Signal Strength icon. 4 Levels. Excellent, Satisfactory, Low & No Signal. From the device window if you select Edit you can see all the motors device settings and the device information. Refer to Page 18 for more information about the battery status and Signal Strength Status HOW TO CREATE A ROOM:
STEP 1 Create a Room STEP 2 Create a Room STEP 3 Create a Room STEP 4 Create a Room Select the ROOM NAME to enter the desired room name. Enter the Room Name and click OK. Select ROOM PICTURE to select an icon to represent the room. Once the Shade is paired to the App. Click ROOMS tab. Select the Plus icon to add a new room. designation, return to the home rolleaseacmeda.com 2020 Rollease Acmeda Group STEP 5 Create a Room STEP 6 -Add Shades to a Room STEP 7 -Add Shades to a Room STEP 8 -Add Shades to a Room Select the appropriate icon for the Room. Select ROOM DEVICES to add a new device to the room. Select the devices you wish to be added to the room. Press DONE to complete the setup of the room. STEP 9 -Add Shades to a Room STEP 10 Operate a Room STEP 11 Operate a Room Wait for the App to conclude the process of room set up. Select the Room to operate All shades that have been added to the room at the same time. Operate all shades in the Room with the three buttons options available:
Open, Close and move 50%. rolleaseacmeda.com 2020 Rollease Acmeda Group HOW TO CREATE A SCENE:
You can create scenes to set a treatment or group of treatments to specific heights or capture all the devices that you previously moved to the desired position even from the App or using a remote. STEP 2 Create a Scene STEP 3 Create a Scene STEP 1 Create a Scene STEP 4 Create a Scene Select Scenes then, Add New Scene to begin programming your desired scene. Select the SCENE NAME to customize the name of your scene. Input your scene name. Select SCENE PICTURE to customize the icon for your scene. STEP 5 Create a Scene STEP 6 Automatic a Scene STEP 7 Manual Scene Creation STEP 8 Manual Scene Creation Select the icon that represents your scene. Automatic scene creation Set all devices with the remote to desired position. Then use the Capture All Devices button to create a scene of all current shades are positions. Select Done. Or Select UPDATE SCENE DEVICES to add devices into the Scene. Choose custom heights (by %) or set open/close for all selected window treatments. rolleaseacmeda.com 2020 Rollease Acmeda Group STEP 9 Manual Scene Creation STEP 10 Activate a Scene Repeat for all shade in that scene. Set the shade height percentage if necessary. Select DONE to create your scene. To activate your custom scene just press GO next to the desired scene name. PROGRAMMING TIMERS:
You can program timers to trigger the specific operation of your shades and scenes at your desired times throughout the day. STEP 1 Create a Timer STEP 2 Create a Timer STEP 3 Create a Timer STEP 4 Create a Timer Select TIMERS then, ADD NEW TIMER to program your timer. Select TIMER NAME. Input your desired timer name. Select TIMER ICON to add an icon for your timer. rolleaseacmeda.com 2020 Rollease Acmeda Group STEP 5 Create a Timer STEP 6 Create a Timer STEP 7 Create a Timer STEP 8 Create a Timer Select the appropriate icon for the Timer. Select the TIMER SCENE to choose the scene you wish the timer to activate. In the Scene list, add the scenes you wish to operate. Set the time you wish the timer to trigger shade control. STEP 9 Create a Timer STEP 10 Create a Timer STEP 11 Enable /Disable Timer STEP 12 Pause/Un-Pause Timer Select the days you wish the timer to operate. If you prefer, track your timer through the Sunrise/Sunset functions. Select DONE to finalize your timer. Your timers can be manually enabled and disabled by toggling the switch for each timer. Your timers can be paused and un-
paused to switch all timers on and off at the same time. rolleaseacmeda.com 2020 Rollease Acmeda Group HOW TO CREATE FAVORITE:
STEP 1 Create a Favorite Device STEP 2 Edit a Favorite Device STEP 3 Create a Favorite Scene STEP 4 Create a Favorite Scene Select the Plus icon to add a favorite device to your Favorite HOW TO ADJUST LIMITS:
Select EDIT in the upper right corner to remove the favorite device from your screen. Select the Plus icon to add a favorite scene to your Favorite Select EDIT in the upper right corner to remove the favorite scenes from your screen. STEP 1 Adjust Limits STEP 2 Adjust Limits STEP 3 Setting Limits STEP 4 Setting Limits Select the device you want to adjust the limits on. Select EDIT in the top right to open the shades settings page. Modify the Top or Bottom position of the Device as desired Select the Top Position to change the upper limit of your shade. Press OK to continue rolleaseacmeda.com 2020 Rollease Acmeda Group STEP 5 Setting Limits STEP 6 Setting Limits STEP 7 Setting Limits STEP 8 Setting Limits To move your shade a little bit, press the arrow buttons or slide the double arrow button. Press SET TOP POSIITION to save. The app will configure the new top position. Press the Bottom Position to change the lower limit of your shade. Press OK to continue. To move your shade a little bit, press the arrow buttons or slide the double arrow button. Press SET BOTTOM POSIITION to save. STEP 9 Setting Limits The app will configure the new Bottom Position. rolleaseacmeda.com 2020 Rollease Acmeda Group HOW TO SHARE THE HUB:
STEP 1 - Share a Hub STEP 2 - Share a Hub STEP 3 - Share a Hub STEP 4 - Share a Hub In the Add a Hub Screen, it is possible to connect to a shared hub. The HUB must have been shared from another account. The shared Hub will be listed on the shared Hubs list to be added. After it is added, the shared hub will appear under the Location Settings it was added to with a red S rolleaseacmeda.com 2020 Rollease Acmeda Group LED STATUS INDICATION:
COLOR RESPONSE Blue LED blinks one time a second:
(On for 250ms and off for 850ms). STATUS AP Mode (Pairing Mode) Blue LED short blinks five times a second:
(On for 100ms and off for 100ms). Firmware Updating Blue LED long blinks two times a second:
(On for 250ms and off for 250ms). Connected to Wi-Fi (Paired without Internet) Blue LED short blinks two times a second:
(On for 100ms and off for 500ms). Blue LED is Solid Pulse received configuration via the app (Before reset after Pairing Mode) Connected to Internet (Paired) Red LED long blinks four times a second:
(On for 250ms and off for 250ms). Reset Button Pressed
(Paperclip Needed)
-Red LED short blinks four times a second:
(On for 100ms and off for 150ms). Network Disconnected (Paired without Wi-Fi) Red LED is solid Factory Reset Initiated (User can release reset button)
-Green LED blinks 5 times for one second:
(On for 100ms and off 100ms). HomeKit Identification Re-provisioning Initiated
(User can release P button). Green LED is solid LED is Off Hub is Offline rolleaseacmeda.com 2020 Rollease Acmeda Group MEANING OF ICONS:
App Screen Icon MEANING Signal Strength Icons STATUS Excellent Greater than -89 Satisfactory Between -96 to -89 Low Between -102 to -97 No Signal Between -102 to -97 Battery Percentage Icon 3 Levels of Battery Full 100-70%
Medium 69-11%
Low 10% or less (and motor starts beeping) Pop up The motor is offline, and the control device is not on the same network. Motor Offline Pop up reminder Motor Offline The motor is offline, and the control device is not on the same network. Greyed out Icons Signal or Battery Icons being greyed out when the motor is offline, it displays the last known values rolleaseacmeda.com 2020 Rollease Acmeda Group AC Motor Type Icon AC Powered Motor connected to continuous power DC Motor Type Icon DC Powered Motor connected to continuous power Full 100-70%
Medium 69-11%
Low 10% or less Note varying voltages may be displayed as above TROUBLESHOOTING:
The following scenarios are common issues that may cause connectivity problems during the AUTOMATE PULSE 2 HUB pairing process. If you cannot achieve success connecting the Automate Pulse 2 Hub to your network, please reference below for the most common pairing roadblocks. I CANNOT CONNECT TO MY HIDDEN WI-FI NETWORK. The AUTOMATE PULSE 2 HUB does not currently support pairing with hidden networks. To connect to a hidden network, you will need to unhide the network. Once the network pairing process is complete you can re-hide the network and the Wi-Fi HUB will work without issue. I HAVE MULTIPLE ACCESS POINTS (or a MESH network) AND CANNOT COMPLETE THE PAIRING PROCESS. If you have multiple wireless access points, we recommend that you turn off all but the main router to complete the network pairing process. Once this is complete you can turn on all the wireless access points and the Wi-Fi HUB will work without issue. I CANNOT CONNECT TO MY 5GHZ WI-FI NETWORK. The AUTOMATE PULSE 2 HUB does not currently support operation over a 5GHz network. It operates on a 2.4GHz network or using a LAN CONNECTION (CAT 5). Most routers are dual band and can support both network configurations. Please make sure that the 2.4GHz band is turned on in your wireless routers settings. NETWORK SECURITY SETTINGS ARE INTERFERING WITH THE SETUP PROCESS. Some companies or large corporate offices have network security settings more advanced than the typical homeowner. If you are setting up in this environment, please consult your network administrator. It may be necessary to enable device-to-device communication. One solution is to use a device with a mobile data connection available in the background to complete the set-up process. MY AUTOMATE PULSE 2 HUB IS NOT CONSISTENTLY WORKING. There are many things that can interfere with the radio communication that the AUTOMATE PULSE 2 HUB uses. Try positioning the AUTOMATE PULSE 2 HUB in a different location and/or closer to the shade to improve performance. Due to varying levels of interference it may be necessary to purchase an additional Wi-Fi HUB to extend the coverage throughout your location. Also, is a good practice on this situation to extending antennas outside of any Fascia or Cassette. SUPPORT RESOUCES:
For further assistance, contact your retailer, or visit our website at www.automateshades.com rolleaseacmeda.com 2020 Rollease Acmeda Group This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Caution: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may cause undesired operation of the device. Lmetteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme aux CNR dInnovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes:
1) Lappareil ne doit pas produire de brouillage;
2) Lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. To satisfy FCC&IC RF exposure requirements, a separation distance of 20cm or more should be maintained between the antenna of this device and persons during device operation. To ensure compliance, operations at closer than this distance is not recommended. Les antennes installes doivent tre situes de facon ce que la population ne puisse y tre expose une distance de moin de 20 cm. Installer les antennes de facon ce que le personnel ne puisse approcher 20 cm ou moins de la position centrale de l antenne. Limited by local law regulations, version for North America does not have region selection option. rolleaseacmeda.com 2020 Rollease Acmeda Group
1 2 | User manual iOS 2.1 | Users Manual | 2.03 MiB | October 30 2020 |
Pulse 2 Hub | Set up Instructions for iOS The Pulse 2 connects to home networks to unlock the luxury of automated shade control. Experience customization with scene and timer options as well as voice control via Google Assistant, Amazon Alexa, and Apple HomeKit. THE APP ALLOWS FOR:
Individual and group control Group Automate shades by room and conveniently control them accordingly. 1. 2. Remote connectivity - Control shades remotely, whether home or away on a local network or an internet connection. 3. Scene control - Personalize shade control and organize how your shades operate by specific daily events. 4. Timer functionality - Set and forget. Lower, raise and activate shade scenes automatically at the optimal time. 5. Sunrise and Sunset - Utilizing time zone and location, the Pulse 2 can automatically raise or lower Automate shades according to the position of the sun. 6. Compatible IoT Integrations:
Amazon Alexa
- Google Home IFTTT Smart Things Apple HomeKit GETTING STARTED:
In order to experience automated shade control through the Automate Pulse 2 app, you will need to have:
Downloaded the free app Automate Pulse 2 App via the Apple App Store (available under iPhone apps) or iPad apps for iPad devices. Purchased one or more Hubs depending on the size of the area you would like to cover. Created a Location then pair hub to that location. Our step by step guide will explain in more detail. Familiarized yourself with the app navigation guide below. WI-FI HUB TECHNICAL SPECIFICATIONS:
Radio Frequency: 433 MHz Radio Frequency range: ~ 60 feet (no obstructions) Wi-Fi 2.4 GHz or Ethernet Connectivity (CAT 5) Power: 5V DC For Indoor Use Only BEST PRACTICES FOR PAIRING THE HUB WITH YOUR WI-FI NETWORK:
The Hub must be within signal range of both the automated shades and 2.4GHZ Wi-Fi. Ensure 5Ghz are disabled on your Wi-Fi router or disconnected from your mobile device. Only pair your hub via 2.4GHZ Wi-Fi (Lan Pairing is not supported) Do not connect ethernet to the hub. Check your phone and confirm if the Home App has been installed. Environments with multiple WAPs (wireless access points) may need all but the main router temporarily disabled. Security settings on your router and on phone may need to be temporarily disabled. Place the Hub in a horizontal position. (avoid metal enclosures / ceiling or any other locations that may affect the range. Before starting the Hub installation, make sure that all your shades are functional and charged. You can test the shade using a remote control or pressing a P1 Button on the motor head. In case of range issues, it is recommended you deploy the antenna or reposition the hub in your installation. Add additional repeaters if is required (Only two per Hub). CAPABILITIES:
Locations per account: 5 Motors per Hub: 30 Hubs per location: 5 Rooms per Location: 30 per Hub Scenes per Hub: 20 (100 per location) Timers per Hub: 20 (100 per location) A. Automate Pulse 2 Hub B. USB Power Supply C. 32 (80cm) USB Power Cord D. Ethernet cable E. Quick Start Guide UNPACKING THE HUB 2.0:
1. Unpack the Pulse 2. 2. Check the Box Contents. 3. Plug the USB Cord into the Power Supply 4. Connect the Micro USB end into the back of the Pulse 2 5. Plug the Power Supply into the outlet and place the Hub in a central location in your home. Locations Menu Rooms Devices Home Favorite Scenes Timers Shows the main control screen with rooms and devices tabs Allows you to create a list of your favorite Devices or Scenes Show a list of scenes created Show a list of scene timers WHATS IN THE BOX?
APP NAVIGATION:
Home Page Home:
Favorites:
Scenes:
Timers:
App Version: 2.0.(13) rolleaseacmeda.com 2020 Rollease Acmeda Group ACCOUNT SETUP:
STEP 1 Open the App STEP 2 Sign Up STEP 3 Sign Up STEP 4 Sign In Email Email Open the Automate Pulse 2 mobile App. If required, create a new account. Select Sign Up on the Top Right corner of the screen. QUICK START SETUP:
NOTE: You cannot pair the hub via the Ethernet cable connection, Wi-Fi only via a 2.4GHZ connection. Refer to troubleshooting for more information. STEP 2 Add Location STEP 1 Quick Start Creating an account will require an email address and password STEP 3 Discover Hub STEP 4 Scan Hub If you already have an account Log in with your account information. Please power up the Hub then follow the Quick Start guide. Select YES. rolleaseacmeda.com 2020 Rollease Acmeda Group You can create a name for your location or select Next to use the Default My House. Select the Hub you wish to connect too and then press Next. Scan the QR Code on the bottom of the hub to sync with HomeKit. STEP 5 HomeKit Success STEP 6 Time Zone STEP 7 Finalizing STEP 8 Pairing Completed The Hub has successfully connected to HomeKit. Press Done to continue. Select your Time Zone. This is important for timers to operate correctly. Ensure daylight savings is enabled. Wait as the hub finalizes the setup. The Hub is ready to be used! Press DONE to start the Application. ADDING ADDITIONAL HUB TO EXSITING LOCATION:
STEP 1 - Configure a Hub STEP 2 - Configure a Hub STEP 3 - Configure a Hub STEP 4 - Configure a Hub Select the location desired to add a new hub to. Click on ADD NEW HUB to start the process to setting up your HUB on the App. Follow on the screen instructions and click on the button to connect to NEW HUB. From the list select the hub you wish to pair to. Select NEXT rolleaseacmeda.com 2020 Rollease Acmeda Group STEP 5 - Configure a Hub STEP 6 - Configure a Hub STEP 7 - Configure a Hub STEP 8 - Configure a Hub Scan the QR Code on the bottom of the hub to sync with Homekit The hub was successfully added to Homekit!
Select your Time Zone. This is important for timers to operate correctly. Wait while the hub connects to your Wi-Fi Network STEP 9 - Configure a Hub The Hub is ready to be used! Press DONE to start the Application. rolleaseacmeda.com 2020 Rollease Acmeda Group MANUAL HUB CONFIGURATION IN APPLE HOMEKIT:
STEP 1 - Configure a Hub STEP 2 - Configure a Hub STEP 3 - Configure a Hub STEP 4 - Configure a Hub If the App does not recognize the QR Code, you should enter code manually. Select Enter Code to enter the Homekit code manually Type the code on the label. Wait while the hub syncs with Homekit. CREATING A LOCATION:
STEP 1 Add Location STEP 2 Add Location STEP 3 Toggle Location Open the App from the home screen and select the menu button, click ADD NEW LOCATION. Select the default location and update the location name if desired. Select Ok then Done. If you have setup multiple locations, select the Location icon in the upper right corner to toggle between locations. rolleaseacmeda.com 2020 Rollease Acmeda Group STEP 2- Custom Home Image STEP 3- Custom Home Image STEP 4- Custom Home Image STEP 1- Custom Home Image ADDING CUSTOM HOME IMAGE:
HOW TO PAIR A MOTOR TO THE APP:
During the setup, the hub may need to be moved room to room during the pairing process. We recommend setting up your motors with a remote prior to syncing with the App. From the main menu select the location you wish to change the home image for. Select Change Location Image. Choose to Select Image from Library. You will need to Allow Pulse 2 access to import a picture, Select the image and crop as desired. STEP 1 Pair a motor STEP 2 Pair a motor STEP 3 Pair a motor STEP 4 Pair a motor On the home screen select DEVICES then select the Plus icon to add a new shade. From the list select the HUB you wish to pair the motor too. Select which device type best represents your shade.. (NOTE this cant be changed later) Make sure the shade device is plugged in or ready to be paired and select NEXT device. rolleaseacmeda.com 2020 Rollease Acmeda Group STEP 5 Pair a motor STEP 6 Pair with Remote STEP 7 Pair with HUB STEP 8 Pair a motor Choose your pairing method: PAIR USING HUB or COPY FROM REMOTE.
*We recommend copying from a remote for the best results. Make sure the remote is tuned to the shades individual channel (not Ch 0). Remove the remote battery cover and press the upper left P2 button Twice, then Next. Press and hold the P1 button on the motor head ~2 seconds. The motor will jog up and down once and you will hear one audible beep. Press PAIR on the app screen. Wait as the app searches for the new device. STEP 9 Pair a motor STEP 10 Shade Details STEP 11 Pair a motor STEP 12 Shade Ready If the pairing process was successful, Press NEXT to finalize pairing. If pairing fails, try the process again. Input a Device Name to customize your treatment name. Press Done to complete setup. The New Device will now be added to the DEVICE tab Shade is now ready for operation from Pulse 2 App. rolleaseacmeda.com 2020 Rollease Acmeda Group HOW TO OPERATE SHADES:
STEP 1 Operate Shade STEP 2 - Open a shade STEP 3 - Close a shade STEP 4 - Move a shade Select the device that you wish to operate. Close the shade by pressing the Down Arrow icon or scrolling the black line to the bottom. Open the shade by pressing the Up arrow icon or scrolling the black line to the top. Move the shade to the position desired by scrolling the line to any position. Press the stop button to stop the shade anytime. DEVICE INFORMATION:
Battery Device Information Signal Device Information Device Information Top left corner, there is the battery icon This icon has 3 levels. Full, Medium & Low. Top right there is the Signal Strength icon. 4 Levels. Excellent, Satisfactory, Low & No Signal. Refer to Page 18 for more information about the battery status and Signal Strength Status From the device window if you select Edit you can see all the motors device settings and the device information. rolleaseacmeda.com 2020 Rollease Acmeda Group HOW TO CREATE A ROOM:
STEP 1 Create a Room STEP 2 Create a Room STEP 3 Create a Room STEP 4 Create a Room Once the Shade is paired to the App. Click ROOMS tab. Select the Plus icon to add a new room. designation, return to the home Select the ROOM NAME to enter the desired room name. Enter the Room Name and click OK. Select ROOM PICTURE to select an icon to represent the room. STEP 5 Create a Room STEP 6 -Add Shades to a Room STEP 7 -Add Shades to a Room STEP 8 -Add Shades to a Room Select the appropriate icon for the Room. Select ROOM DEVICES to add a new device to the room. Select the devices you wish to be added to the room. Press DONE to complete the setup of the room. rolleaseacmeda.com 2020 Rollease Acmeda Group STEP 9 -Add Shades to a Room STEP 10 Operate a Room STEP 11 Operate a Room Wait for the App to conclude the process of room set up. Select the Room to operate All shades that have been added to the room at the same time. Operate all shades in the Room with the three buttons options available:
Open, Close and move 50%
HOW TO CREATE A SCENE:
You can create scenes to set a treatment or group of treatments to specific heights or capture all the devices that you previously moved to the desired position even from the App or using a remote. STEP 1 Create a Scene STEP 2 Create a Scene STEP 3 Create a Scene STEP 4 Create a Scene Select Scenes then, Add New Scene to begin programming your desired scene. Select the SCENE NAME to customize the name of your scene. Input your scene name. Select SCENE PICTURE to customize the icon for your scene. rolleaseacmeda.com 2020 Rollease Acmeda Group STEP 5 Create a Scene STEP 6 Automatic Scene STEP 7 Manual Scene Creation STEP 8 Manual Scene Creation Select the icon that represents your scene. Automatic scene creation Set all devices with the remote to desired position. Then use the Capture All Devices button to create a scene of all current shades are positions. Select Done. Or Select UPDATE SCENE DEVICES to add devices into the Scene. Choose custom heights (by %) or set open/close for all selected window treatments. STEP 9 Manual Scene Creation STEP 10 Activate a Scene Repeat for all shade in that scene. Set the shade height percentage if necessary. Select DONE to create your scene. To activate your custom scene just press GO next to the desired scene name rolleaseacmeda.com 2020 Rollease Acmeda Group PROGRAMMING TIMERS:
You can program timers to trigger the specific operation of your shades and scenes at your desired times throughout the day. STEP 1 Create a Timer STEP 2 Create a Timer STEP 3 Create a Timer STEP 4 Create a Timer Select TIMERS then, ADD NEW TIMER to program your timer. Select TIMER NAME. Input your desired timer name. Select TIMER ICON to add an icon for your timer. STEP 5 Create a Timer STEP 6 Create a Timer STEP 7 Create a Timer STEP 8 Create a Timer Select the appropriate icon for the Timer. Select the TIMER SCENE to choose the scene you wish the timer to activate. In the Scene list, add the scenes you wish to operate. Set the time you wish the timer to trigger shade control. rolleaseacmeda.com 2020 Rollease Acmeda Group STEP 9 Create a Timer STEP 10 Create a Timer STEP 11 Enable /Disable Timer STEP 12 Pause/Un-Pause Timer HOW TO CREATE FAVORITE:
Select the days you wish the timer to operate. If you prefer, track your timer through the Sunrise/Sunset functions. Select DONE to finalize your timer. Your timers can be manually enabled and disabled by toggling the switch for each timer. Your timers can be paused and un-
paused to switch all timers on and off at the same time. STEP 1 Create a Favorite Device STEP 2 Edit a Favorite Device STEP 3 Create a Favorite Scene STEP 4 Create a Favorite Scene Select the Plus icon to add a favorite device to your Favorite. Select EDIT in the upper right corner to remove the favorite device from your screen. Select the Plus icon to add a favorite scene to your Favorite. Select EDIT in the upper right corner to remove the favorite scenes from your screen. rolleaseacmeda.com 2020 Rollease Acmeda Group HOW TO ADJUST LIMITS:
STEP 1 Adjust Limits STEP 2 Adjust Limits STEP 3 Setting Limits STEP 4 Setting Limits Select the device you want to adjust the limits on. Select Edit on the top right to open the shades settings page. Modify the Top or Bottom position of the Device as desired. Select the Top Position to change the upper limit of your shade. Press OK to continue. STEP 5 Setting Limits STEP 6 Setting Limits STEP 7 Setting Limits STEP 8 Setting Limits To move your shade a little bit, press the arrow buttons or slide the double arrow button. Press SET TOP POSIITION to save. The app will configure the new top position. Press the Bottom Position to change the lower limit of your shade. Press OK to continue To move your shade a little bit, press the arrow buttons or slide the double arrow button. Press SET BOTTOM POSIITION to save. rolleaseacmeda.com 2020 Rollease Acmeda Group STEP 9 Setting Limits The app will configure the new Bottom Position. HOW TO SHARE THE HUB:
rolleaseacmeda.com 2020 Rollease Acmeda Group STEP 1 - Share a Hub STEP 2 - Share a Hub STEP 3 - Share a Hub STEP 4 - Share a Hub In the Add a Hub Screen, it is possible to connect to a shared hub. The HUB must have been shared from another account. The shared Hub will be listed on the shared Hubs list to be added. After it is added, the shared hub will appear under the Location Settings it was added to with a red S. LED STATUS INDICATION:
COLOR RESPONSE Blue LED blinks one time a second:
(On for 250ms and off for 850ms). STATUS AP Mode (Pairing Mode) Blue LED short blinks five times a second:
(On for 100ms and off for 100ms). Firmware Updating Blue LED long blinks two times a second:
(On for 250ms and off for 250ms). Connected to Wi-Fi (Paired without Internet) Blue LED short blinks two times a second:
(On for 100ms and off for 500ms). Blue LED is Solid Pulse received configuration via the app (Before reset after Pairing Mode) Connected to Internet (Paired) Red LED long blinks four times a second:
(On for 250ms and off for 250ms). Reset Button Pressed
(Paperclip Needed)
-Red LED short blinks four times a second:
(On for 100ms and off for 150ms). Network Disconnected (Paired without Wi-Fi) Red LED is solid Factory Reset Initiated (User can release reset button)
-Green LED blinks 5 times for one second:
(On for 100ms and off 100ms). HomeKit Identification Re-provisioning Initiated
(User can release P button). Green LED is solid LED is Off Hub is Offline rolleaseacmeda.com 2020 Rollease Acmeda Group MEANING OF ICONS:
App Screen Icon MEANING Signal Strength Icons STATUS Excellent Greater than -89 Satisfactory Between -96 to -89 Low Between -102 to -97 No Signal Between -102 to -97 Battery Percentage Icon 3 Levels of Battery Full 100-70%
Medium 69-11%
Low 10% or less (and motor starts beeping) Pop up The motor is offline, and the control device is not on the same network. Motor Offline Pop up reminder Motor Offline The motor is offline, and the control device is not on the same network. Greyed out Icons Signal or Battery Icons being greyed out when the motor is offline, it displays the last known values rolleaseacmeda.com 2020 Rollease Acmeda Group AC Motor Type Icon AC Powered Motor connected to continuous power DC Motor Type Icon DC Powered Motor connected to continuous power Full 100-70%
Medium 69-11%
Low 10% or less Note varying voltages may be displayed as above TROUBLESHOOTING:
The following scenarios are common issues that may cause connectivity problems during the AUTOMATE PULSE HUB 2 pairing process. If you cannot achieve success connecting the Automate Pulse Hub 2 to your network, please reference the below most common pairing roadblocks. I CANNOT CONNECT TO MY 5GHZ WI-FI NETWORK. The AUTOMATE PULSE HUB 2 does not currently support operation over a 5GHz network or hopping mesh networks. It operates on a 2.4GHz network or using a Lan Connection. TRYING TO PAIR HUB VIA THE LAN CONNECTION. The AUTOMATE PULSE HUB 2 does not currently support initial pairing via LAN, Pair through Wi-Fi and once the hub is setup connecting via the LAN can be done. I CANNOT CONNECT TO MY HIDDEN WI-FI NETWORK. The AUTOMATE PULSE HUB 2 does not currently support pairing with hidden networks. To connect to a hidden network, you will need to unhide the network. Once the network pairing process is complete you can re-hide the network and the Wi-Fi HUB will work without issue. I HAVE MULTIPLE ACCESS POINTS AND CANNOT COMPLETE THE PAIRING PROCESS. If you have multiple wireless access points, we recommend that you turn off all but one to complete the network pairing process. Once this is complete you can turn on all the wireless access points and the Wi-Fi HUB will work without issue. NETWORK SECURITY SETTINGS ARE INTERFERING WITH THE SETUP PROCESS. Some companies or large corporate offices have network security settings more advanced than the typical homeowner. If you are setting up in this environment, please consult your network administrator. It may be necessary to enable device-to-device communication. One solution is to use a device with a mobile data connection available in the background to complete the set-up process. MY AUTOMATE PULSE HUB 2 IS NOT CONSISTENTLY WORKING. There are many things that can interfere with the radio communication that the AUTOMATE PULSE HUB 2 uses. Try positioning the AUTOMATE PULSE HUB 2 in a different location and/or closer to the shade to improve performance. Due to varying levels of interference it may be necessary to purchase additional Wi-Fi HUB to extend the coverage throughout your location. HOMEKIT PRIVACY SETTINGS NOT ENABLED. Any issue related with HomeKit, please check out the HomeKit Troubleshooting available on your website and also Apple Support page. For further assistance, contact your retailer, or visit our website at www.automateshades.com SUPPORT RESOUCES:
rolleaseacmeda.com 2020 Rollease Acmeda Group This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Caution: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may cause undesired operation of the device. Lmetteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme aux CNR dInnovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes:
1) Lappareil ne doit pas produire de brouillage;
2) Lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. To satisfy FCC&IC RF exposure requirements, a separation distance of 20cm or more should be maintained between the antenna of this device and persons during device operation. To ensure compliance, operations at closer than this distance is not recommended. Les antennes installes doivent tre situes de facon ce que la population ne puisse y tre expose une distance de moin de 20 cm. Installer les antennes de facon ce que le personnel ne puisse approcher 20 cm ou moins de la position centrale de l antenne. Limited by local law regulations, version for North America does not have region selection option. rolleaseacmeda.com 2020 Rollease Acmeda Group
1 2 | Label location | ID Label/Location Info | 3.63 MiB | October 30 2020 |
45mm MT02-0401-067001 MODEL:
2AGGZ-APULSE-2 FCC ID:
IC:
21769-APULSE2 POWER INPUT: (5V DC)(1000mA) WiFi:
DEVICE RF:
CAN ICES-3(B)/NMB-3(B) 2.4GHz 802.11b/g/n 433.92MHz m m 1 5 TESTED TO COMPLY WITH FCC STANDARDS FOR HOME OR OFFICE USE AUTOMATESHADES.COM DESIGNED IN USA | MADE IN MEXICO v1.3 45mm MT02-0401-067005 MODEL:
2AGGZ-APULSE-2 FCC ID:
IC:
21769-APULSE2 POWER INPUT: (5V DC)(1000mA) WiFi:
DEVICE RF:
CAN ICES-3(B)/NMB-3(B) 2.4GHz 802.11b/g/n 433.92MHz m m 1 5 TESTED TO COMPLY WITH FCC STANDARDS FOR HOME OR OFFICE USE ROWLEYCOMPANY.COM DESIGNED IN USA | MADE IN MEXICO v1.3 45mm MT02-0401-067003 MODEL:
2AGGZ-APULSE-2 FCC ID:
IC:
21769-APULSE2 POWER INPUT: (5V DC)(1000mA) WiFi:
DEVICE RF:
CAN ICES-3(B)/NMB-3(B) 2.4GHz 802.11b/g/n 433.92MHz m m 1 5 TESTED TO COMPLY WITH FCC STANDARDS FOR HOME OR OFFICE USE THESHADESTORE.COM DESIGNED IN USA | MADE IN MEXICO v1.3 45m MT02-0401-067004 MODEL:
2AGGZ-APULSE-2 FCC ID:
IC:
21769-APULSE2 POWER INPUT: (5V DC)(1000mA) WiFi:
DEVICE RF:
CAN ICES-3(B)/NMB-3(B) 2.4GHz 802.11b/g/n 433.92MHz m m 1 5 TESTED TO COMPLY WITH FCC STANDARDS FOR HOME OR OFFICE USE BUDGETBLINDS.COM DESIGNED IN USA | MADE IN MEXICO v1.3 Label Location For reference only, label will be updated
1 2 | Declaration letter for channel 12 and 13 | Cover Letter(s) | 30.82 KiB | October 30 2020 |
We, Rollease Acmeda Inc, hereby declare that the product Pulse 2 Hub is not capable of operating with channel 12 and 13 in regions of US and Canada. Role tele 750 East Main Street Stamford CT 06902-6320 USA T 800 552 5100 infofdrolleaseacmeda.com USA | AUSTRALIA | EUROPE 1-Must be signed by applicant contact given for applicant on the FCC site, or by the authorized agent if an appropriate authorized agent letter has been provided. Letters should be placed on appropriate letterhead. Title: Product Manager Motorization Versions of the product available for import and sale in the US and Canada will not operate on channels 12 and 13. It will not be possible for users and configure these channels in the US and Canada version. Jonny Matuichuk
(Print name) AS tara leche |
Declaration Letter ROLLEASE ACMED, rolleaseacmed
1 2 | FCC Authority Letter | Cover Letter(s) | 48.76 KiB | October 30 2020 |
Rollease Acmeda Inc Wha rere Stamford CT 06902-6320 USA T 800 552 5100 infotdrolleaseacmeda.com Must be signed by applicant contact given for applicant on the FCC site, or by the authorized agent if an appropriate authorized agent letter has been provided. Letters should be placed on appropriate letterhead. On behalf of: Rollease Acmeda Inc
(Company Name) Telephone: +1 203 490-6191 Title: Product Mana er - Motorization Agency Agreement Expiration Date: 19 October 2021 Date: October 19, 2020 American Certification Body, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 KOM Aer iM ENA Oe eceh Intertek Testin Services Shan hai is authorized to act on our behalf, until otherwise notified, for applications to American Certification Body, Inc. (ACB). We certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002 (b) to the application is subject to denial of federal benefits, that includes FCC benefits. We also declare that the information provided to the FCC is true and correct to the best of our knowledge (47 CFR 2.911(d)) and we have been informed of the grantee responsibilities (47 CFR 2.909) with regard to certified equipment. BUT ayo Jonn Matuichuk
(Print name) 1ofi
(Signature!) ROLLEASE ACMEDA USA | AUSTRALIA | EUROPE Authori to Actas A ent ROLLEASE ACMEDA USA
1 2 | FCC Confidentiality Letter | Cover Letter(s) | 77.93 KiB | October 30 2020 |
USA | AUSTRALIA | EUROPE OCC w vet PASC uci Stamford CT 04902-6320 USA BMY An (6) info@ratleaseacmeda.com h_ s://a_ s.fec. ov/oetcf/kdb/forms/FTSSearchResultPa e.cfm?switch=P&id=41731 h__ ://acbcert.com/documents/misc-docs/Memo-Short-Term-Vs-Standard-
ROLLEASE ACMEDA NUMMER OEE Date: October 19, 2020 Subject: Confidentiality Request for:
Pursuant to FCC 47 CFR 0.457(d) and 0.459, the applicant requests that a part of the subject FCC application be held confidential. Type of Confidentiality Requested alot Roca Kor ovens Block Diagrams C1 Short Term External Photos Riese Kove (J Permanent *! [friccrnstclin eg itelcercy MRS tou XS eee Permanent Operation Description/Theory of Operation 0 Short Term MB crest Coelh Parts List & Placement/BOM D Short Term MB Zo vetnoit BUT Oe erecta UO Short Term I Permanent Re Cos tereai ot MBS) Kenai oueel Test Setup Photos QD) Short Term CO Permanent *3 Users Manual Rollease AcmedaInc has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to "competition" would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. Permanent Confidentiality:
The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. Short-Term Confidentiality:
The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of s eci number of da s not to exceed 180? _ days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Applicant is also aware that they are responsible to notify ACB in the event information regarding the product or the product is made available to the public before the requested period has expired. ACB will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-1705. NOTE for Industry Canada Applications:
IC currently only distinguishes Permanent Confidentiality exhibits as shown above. Short Term confidentiality is not considered applicable to IC applications. Sincerely, ha Jonn Matuichuk Sts ammT Co (Print name) The asterisked items (*) require further information to be provided to ACB before permanent confidentiality will be extended to these exhibits. Please refer to FCC KDB 726920 and the specific Document link for DO1 found at:
EI ehs AVAL ace (aye Il, 3) regarding specific information that must accompany these requests. Please refer to for complete details. an ere Pe Ero Confidentiali . df Must be signed by applicant contact given for applicant on the FCC site, or by the authorized agent if an appropriate authorized agent letter has been provided. Letters should be placed on appropriate letterhead. ROLLEASE ACMEDA FCC ID: 2AGGZ-APULSE-2
1 2 | Model Differences Declaration | Cover Letter(s) | 27.01 KiB | October 30 2020 |
By 1R-H 19/Oct/2020 arias Product Manager - Motorization alae Jonny Matuichuk MT02-0401-067001, MT02-0401-067003, Meyer TO elf 0 00 MT02-0401-067005, and model number. are identical in electrical and mechanical construction, except for different trade name Yours sincerely, ROLLEASE ACMEDA USA J AUSTRALIA EUROPE Rollease Acmeda Inc WUE El ela Stamford CT 06902-6320 USA T 800 552 5100 infofarolleaseacmeda.com To whom it may concern, Letter of Declaration We, Rollease Acmeda Inc, hereby declare the models below:
Cotati]
ROLLEASE ACMEBA USA
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2020-10-30 | 2412 ~ 2462 | DTS - Digital Transmission System | Original Equipment |
2 | 433.92 ~ 433.92 | DSC - Part 15 Security/Remote Control Transmitter |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 2 | Effective |
2020-10-30
|
||||
1 2 | Applicant's complete, legal business name |
Rollease Acmeda Inc
|
||||
1 2 | FCC Registration Number (FRN) |
0025043381
|
||||
1 2 | Physical Address |
750 East Main Street, 7th Floor
|
||||
1 2 |
Stamford, CT
|
|||||
1 2 |
United States
|
|||||
app s | TCB Information | |||||
1 2 | TCB Application Email Address |
h******@acbcert.com
|
||||
1 2 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
1 2 |
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
|||||
app s | FCC ID | |||||
1 2 | Grantee Code |
2AGGZ
|
||||
1 2 | Equipment Product Code |
APULSE-2
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 2 | Name |
J****** E****** M********
|
||||
1 2 | Title |
Product Manager - Motorization
|
||||
1 2 | Telephone Number |
20349********
|
||||
1 2 | Fax Number |
20396********
|
||||
1 2 |
j******@rolleaseacmeda.com
|
|||||
app s | Technical Contact | |||||
1 2 | Firm Name |
Intertek Testing Services Shanghai
|
||||
1 2 | Name |
E****** L********
|
||||
1 2 | Physical Address |
Building No.86, 1198 Qinzhou Road(North)
|
||||
1 2 |
Shanghai, 200233
|
|||||
1 2 |
United States
|
|||||
1 2 |
China
|
|||||
1 2 | Telephone Number |
86-21********
|
||||
1 2 |
86 21********
|
|||||
1 2 | Fax Number |
86-21********
|
||||
1 2 |
86 21********
|
|||||
1 2 |
E******@intertek.com
|
|||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 2 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 2 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 2 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 2 | Equipment Class | DTS - Digital Transmission System | ||||
1 2 | DSC - Part 15 Security/Remote Control Transmitter | |||||
1 2 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Wi-Fi to RF433 Bridge | ||||
1 2 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 2 | Modular Equipment Type | Does not apply | ||||
1 2 | Purpose / Application is for | Original Equipment | ||||
1 2 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | Yes | ||||
1 2 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 2 | Grant Comments | Power Output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20 MHz and 40 MHz bandwidth mode. | ||||
1 2 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 2 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 2 | Firm Name |
Intertek Testing Services Shanghai
|
||||
1 2 |
Intertek Testing Services Limited, Shanghai
|
|||||
1 2 | Name |
L****** X******
|
||||
1 2 | Telephone Number |
+86 2********
|
||||
1 2 |
l******@intertek.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | CC | 2412.00000000 | 2462.00000000 | 0.1156100 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
2 | 1 | 15.231 | CC | 433.92000000 | 433.92000000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC