FCC ID: 2AD6G-RP410-WU Label Printer

FCC Statement:

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with minimum distance 20cm between the radiator&your body.

Label Label size50mm*60mm Warning words are reflected in the instruction manual. Label location This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Rongta Technology (Xiamen) Group Co., Ltd. Agent Authorization Letter 2022-05-26 Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 USA RE: LETTER OF AGENT AUTHORIZATION To Whom It May Concern:

We, the undersigned, hereby authorize Shenzhen Most Technology Service Co., Ltd. to act on our behalf in all matters relating to application for equipment authorization, including the signing of all documents relating to these matters. We also hereby certify that no party to the application authorized hereunder is subject to the denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C.853(a). This agreement expires one year from the current date. Sincerely, Name:

Position:

Company Name:

Address:

Tel / Fax E-Mail:

Kaihe Xu General manager Rongta Technology (Xiamen) Group Co., Ltd. No.889 Xinmin Avenue,Tongan District,Xiamen,China

+86-592 5602 881/+86 592 5602887 yanglitie@rongtatech.com

Rongta Technology (Xiamen) Group Co., Ltd. Long Term Confidentiality Request Letter 2022-05-26 Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 USA RE: CONFIDENTIALITY REQUEST FOR (FCC ID: 2AD6G-RP410-WU) To Whom It May Concern:

This letter serves as an official request for confidentiality under sections 0.457 and 0.459 of CFR 47. We have requested that the

required to be submitted with this application be permanently withheld from public review. e.g. Block diagram e.g. SCH e.g. Operational Description The above documents are company proprietary information that could never get into the possession of your competition. Please contact me if there is any information you may need. Sincerely, Name:

Position:

Company Name:

Address:

Tel / Fax E-Mail:

Kaihe Xu General manager Rongta Technology (Xiamen) Group Co., Ltd. No.889 Xinmin Avenue,Tongan District,Xiamen,China

+86-592 5602 881/+86 592 5602887 yanglitie@rongtatech.com

Model difference letter 2022.05.26 Dear MET Reviewer, This is a new Application from Rongta Technology (Xiamen) Group Co., Ltd. Model No.:

RP410,RP410Y,PT410,YP410,RP410YU,RP410U,RP410A,RP410B,RP410C, RP410D,RP410E,RP410F,RP410G,RP410H,RP410Z,RP410K,RP410L,RP41 0N,RP410S,RP410W Use RP410 for all tests.Only the model name is different. Thank you for your cooperation!

Yours sincerely, Signatory:

Name:

Position:

Company Name:

Address:

Tel / Fax E-Mail:

Kaihe Xu General manager Rongta Technology (Xiamen) Group Co., Ltd. No.889 Xinmin Avenue,Tongan District,Xiamen,China

+86-592 5602 881/+86 592 5602887 yanglitie@rongtatech.com