FCC ID: 2AW6R-IUVC1 iUVC1 UVC Smart Lamp

INSTRUCTION GUIDE iUVC1 | UVC Smart Lamp Please carefully read this instruction guide before using the product 1. Overview Thank you for choosing the ARCHIPELAGO iUVC1 UVC Smart Lamp. Before using iUVC1, please read the instruction carefully in order to use this product in a safe and sound manner. If you have further questions and should problems persist, please email our after-sale service:

iuvc1@archipelagolighting.com We welcome your valuable suggestions and feedback on this product. Special Statement:

1. The pictures in this manual are for reference only, please refer to the actual product. 2. Without prior notice in the future, iUVC1 might or will undergo technical changes or product design and color for 3. This manual has been carefully checked. Any mistake in printing or misunderstanding in the content, our company product enhancement. reserves the right of final interpretation. A The UVC Smart Lamp will get hot when working, please do not touch the lamp to avoid burns. During the process: humans, animals, and plants should not be in the premises. 2. Product Specification Product Name Model Input Wattage Germicidal Factor Wavelength Size WiFi Mobile App OS iUVC1 UVC Smart Lamp iUVC1 100-240Vac | ~50/60Hz 36W UVC 254nm 18.5 x 7.7 x 7.7 inches WiFi 802.11B/G/N 2.4GHz Android 4.4 / iphoneOS 9.0 and above 1. Manual Mode: Short press function button for fast, full, and custom time modes. The indicator of the corresponding mode flashes slowly during the switching process. After 10 seconds, UVC Smart Lamp starts, and the corresponding mode indicator will always be on. During the process, if the radar detects people or pets, it will stop operating. Short press again to continue. 2. WiFi Connect: Press and hold for more than 5 seconds to connect to the WiFi network state, the button light flashes 3. Turning ON the Device green. 4. Download TuyaSmart

"TuyaSmart" App. the app store. 1. This product is connected with "TuyaSmart", which can wirelessly be controlled by 2. Scan the QR code on the right to download and install the app, or search for "TuyaSmart" in 3. Open the "TuyaSmart "App, click "+" at the top right corner of the page, and add devices according to the prompt. 5. Wireless Settings 1. Connect to WiFi router. Must be 2.4GHz band this device will not connect to 5.0GHz network. 2. After the device is powered on, press and hold the switch button for 5 seconds to enter the network distribution mode, you can choose "Add Manually and "Auto-Scan" distribution network. 3. Open the homepage of "TuyaSmart "App, click "+" "Add Manually" at the top right corner of the page select the electrician Socket (WiFi) to enter, and then add the device according to the App prompt. Or "+", select "Auto Scan to add devices. 4. After successfully connecting to the network, you can control the equipment to work through the "TuyaSmart" App, various operation modes can be applied through the app. Tip: Due to the upgrade and update of "TuyaSmart" App, the actual operation may be slightly different from the above description. Please follow the instructions in the current "Tuya Smart App. 6. Key Light Indicator 1. After the device is powered on, the button indicator light is blue, and if connected to WIFI, it will turn to green. 2. Short press to switch between fast, fulI, and custom time modes. The indicator of the corresponding mode flashes slowly during the switching process. After 10 seconds, UVC Smart Lamp starts, the corresponding mode indicator will always be on. During the operation, the UVC Smart Lamp has a delayed start of 10 seconds to scan for it any moving object on the premises and to warm-up. Please do not confuse as not working". 3. During the operation process, when the radar detects that people or pets have entered the environment, the UVC Smart Lamp will turn off. Short press the button again or restart in the APP to continue disinfection. 4. After the process is completed, the status indicator goes out. 5. App operation--You can select the quick , full, and custom time mode before starting. You cannot change the mode once UVC Smart Lamp has started. After selecting the desired mode, click the start button n the app and the radar will operate, and a buzzer will sound. After the delay start up at 10 seconds and no person or pet is detected, the lamp starts operating, and the status indicator will turn on. During the process, if people or pets have entered the environment, the APP will prompt that operation is interrupted, press OK to continue the operation, or press Cancel to terminate. 7. Power Failure Acknowledgements Status Fault Description UVC bulb is not ON Operation Fault Operation is terminated WiFi Connection Fault Buttons cannot be controlled The network connection is normal, but the APP cannot control the device 8. Safety Precautions 1. Please do not touch the lamp when working, to avoid being burnt by the lamp. 2. During the process, humans, animals and plants should not be in the premises. 3. NOTE: UVC Smart Lamp works similar to the sun in that prolonged exposure can fade colors, including paintings and hardwood floors. 4. Do not bend of pull the AC cable. Damage to the cable may easily lead to accidents such as fire and electric shock. 5. Do not disassemble the product. 6. Place the device in a well-ventilated place and avoid high temperatures or direct sunlight 7. Not for use by children or anyone under the age of 18. 8. Handle with Care the UVC bulbs are fragile and can be easily damaged. Any damaged bulb should be immediately replaced. 9. Clean device with a soft damp cloth when not in use. Do not use any chemicals or cleaning agents. 10.UVC Smart Lamp can be dangerous. The motion sensing feature is a safety feature, however its performance will differ depending on the location and surrounding environment. Please avoid exposure from UVC Smart Lamp. 9. Limited Liability Warranty 1. 12 Month Limited Liability Warranty See https://archipelagolighting.com/support/warranty-statement/ for full details. 2. During the applicable Warranty Period set forth above relating to any Product, Seller warrants that the Products will be free from defects in material and workmanship (the Limited Warranty). This Limited Warranty extends only to the end-

user of the Products (the Buyer). Notwithstanding the foregoing, in no event shall Seller be responsible for and Seller makes no warranty with respect to: (1) damages and defects resulting from the misuse, mishandling or alteration of the Products; (2) damages and defects resulting from catastrophic events such as fires, earthquakes, floods and thunderstorms; (3) damages and defects resulting from improper installation or storage; (4) damages and defects resulting from the lack of maintenance as required in the installation instructions and specification sheets; (5) corrosion or discoloration of the components; and (6) damages resulting from improper use, accident, neglect, abuse, misuse, or acts of God. 3. LIMITATION OF LIABILITY. ARCHIPELAGO will not under any circumstances whether as a result of breach of contract, breach of warranty, tort, strict liability or otherwise be liable for consequential, incidental, special or exemplary damages including but not limited to, loss of pro its or revenues, loss of use of the above product or any other goods or associated equipment or damage to any associated equipment, cost of capital, cost of substituted products, facilities of services, downtime cost, or claims of claimants customers. ARCHIPELAGOs liability on any claim of any kind for any loss or damages arising out of, resulting from or concerning any aspect of this agreement of from the product or services furnished hereunder shall not exceed the price of the specific product or products listed above which gives rise to the claim. This warranty gives the claimant specific legal rights. The claimant may also have other rights, which vary from state to state. 10. Warnings Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

(1)Reorient or relocate the receiving antenna.

(2)Increase the separation between the equipment and receiver.

(3)Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

(4)Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation This device complies with Part 18 of the FCC Rules. This product may cause interference to radio equipment and should not be installed near maritime safety communications equipment or other critical navigation or communication equipment operating between 0.45-30 MHz. This equipment has been tested and found to comply with Part 18 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

(1) Reorient or relocate the receiving antenna.

(2) Increase the separation between the equipment and receiver.

(3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

(4) Consult the dealer or an experienced radio/TV technician for help. RF Radiation Exposure Statement Caution: To maintain compliance with the FCCs RF exposure guidelines, place the product at least 20cm from nearby persons.

50 mm AC120V 60Hz 0.7A Conforms to UL Std. 153 Certified to CSA Std. C22.2 No. 250. 4 FCC ID: 2AW6R-IUVC1 m m 0 5 Size: 50*50mm

RONGYEJIA ELECTRONICS LTD Attention: Certification reviewer RE: Request for Confidentiality FCC ID: 2AW6R-IUVC1 To Whom It May Concern:

[x] Permanent Confidentiality [Complete this section if permanent confidentiality is requested]

Request to withhold permanently from public review certain portions of the application for equipment certification for the referenced FCC identifiers. This request for confidentiality is made pursuant to 47 CFR 0.457(d) and 0.459 of the FCC Rules. In particular, the following sections of the application are to be kept permanently confidential:

[Select one or more of items below, as appropriate]

Xx] Schematics

(X] Block Diagrams J] Operational Description Tune-up Procedure Parts List Internal Photos (see note) Users Manual (see note) Note 1: Internal Photos may be held confidential 1) if the circuit board or internal components are not accessible to users. For example, it is acceptable if the circuit board is enclosed in epoxy. 2) Also, it is acceptable if the device is not accessible to the public, for example, a device mounted on the top of a large tower (or in a fenced enclosure) such that it is only serviceable by professional designated technicians under a Non-Disclosure Agreement (NDA). All sales for these devices must be under a NDA restricting the disclosure of the propriety information, including internal photos. Users Manual may be held confidential only when the manual contains proprietary technical information intended for professional technicians obligated under a NDA. All sales and distribution of the users manual must be under a NDA that restricts the disclosure of the information. In the application cover letter requesting permanent confidentiality the following additional description and the NDA exhibit is required:

1. Describe in detail how internal photos and/or users manual information are controlled to prevent them from becoming public or disclosed to unauthorized persons. 2. Describe how public access is restricted for products serviceable by professional designated technicians. 3. A statement that all sales of the non-consumer device will be under a NDA to include third party sales and that the final user of the device is subject to the NDA. 4. Provide an example of the NDA between the grantee and a purchaser. The request for confidentiality must Note 2: For scanning receiver, the schematics, block diagrams, operational description, tune-up procedure, parts list and internal photos are always held permanently confidential.

[_] Short-term Confidentiality [Complete this section if short-term confidentiality is requested]

Request to withhold from public review for a period of [please enter 1 to 180] days from the date of the Grant of Equipment Authorization and prior to marketing, certain portions of the application for equipment certification for the referenced FCC identifiers. This request for confidentiality is made pursuant to 47 CFR 0.457(d) and 0.459 of the FCC Rules. In particular, the following sections of the application are to be kept short-term confidential for a period above from the date of the grant

[Select one or more of items below that are not selected in the list above, as appropriate}

Schematics Block diagrams Operational Description

[| Tune-up Procedure 1(2) Parts List Test Setup Photos External Photos Internal Photos Users Manual OOOO Rationale for request for confidentiality:

We have invested considerable time and materials in research and development to produce the referenced product.

{| Permanent confidentiality: Disclosure of the permanently confidential portions of this application to competitors would not only give them significant competitive advantages in developing similar products, but would also disclose successful implementation of unpublished, leading edge technology developed by us.

[| Short-term confidentiality: Disclosure of the short-term confidential portions of this application during the period of importation and/or distribution would reveal key aspects of proprietary technology to competitors and diminish the value of our investment in research and development. If you have questions or need further information, please contact the undersigned. Sincerely, XINBWG &

XINBING Li Senior Manager August 6, 2020 2(2)

RONGYEJIA ELECTRONICS LTD August 6, 2020 Federal Communications Commission 445 12% Street SW Washington, DC 20554 Subject: Limited Agency Agreement RONGYEJIA ELECTRONICS LTD FCC ID: 2AW6R-IUVC1 To Whom It May Concern:

We, RONGYEJIA ELECTRONICS LTD, hereby authorized Intertek Testing Services to act as our Agent for the purpose of preparing application for FCC ID number 2AW6R-IUVC1 under all applicable parts of the FCC rules and regulations. The effective date of this limited agency agreement is August 6, 2020. The Limited Agency Agreement expires on August 6, 2021, unless sooner terminated or extended by written notice to Intertek Testing Services and the Federal Communications Commission. This is to advise that we are in full compliance with the Anti-Drug Abuse Act. The applicant is not subject to a denial of federal benefits pursuant to Section 5301 of the Anti-Drug Act of 1988, 21 U.S.C. 862, and no party to the application is subject to a denial of federal benefits pursuant to that section. If you have any questions or comments, please do not hesitate to contact me. Sincerely, XINBING L XINBING Li Senior Manager