IoT Sensor ROOQ Ultra-Low-Power:
1.71 V to 3.6 V power supply;
13 nA shutdown mode;
600 nA Standby mode + RTC + 32 KB RAM;
Radio: Rx 4.5 mA / Tx at 0 dBm 5.2 Ma. Supports Bluetooth Low Energy and 2.4 GHz proprietary/custom protocols RX Sensitivity: -96 dBm (Bluetooth Low Energy at 1 Mbps), -100 dBm (802.15.4) Equipped with the latest Bluetooth 5.0 chip, the transmission data is further improved, and the connection is faster and more stable. Use more accurate 3-axis accelerometer and 3-axis gyroscope to make punch recording more accurate. Compact body, built-in large-capacity battery, with large-capacity MCS, longer battery life. Different status of the sensor corresponds to different status light display, which is more intuitive. MCS has a more accurate battery display, so you know it well. Restricts Bluetooth access to trustworthy users who presents a real digital identity. Provide complete quality assurance, after-sales service and technical support. Product Specification Processor specification CPU CPU Frequency Internal Storage OS Connective OTA Arm-based Cortex-M4 64MHz 64Mbyte of flash memory Support FreeRTOS BT5.0 Suports Multi-Sensor 3-axis accelerometer Range: 0-10000g 3-axis gyroscope Sensitivity : 16.4 LSB/(deg/s) Basic parameters Single Sensor Net Weight Total weight with MCS Sensor battery life Including MCS battery life
~10 g
~75 g
~10 h
~25 h Single Sensor battery capacity 100mAh Li-on 1000mAh Li-on 31.9mm*8.9mm*42.0mm 74.9mm*35.5mm*54.6mm MCS battery capacity Sensor size MCS size Sensor charging time MCS charging time
~1.5 h
~1.5 h Power consumption Single Sensor sleep mode Single Sensor working mode MCS working mode
~7.5mA
~9mA
~150mA Importer:
Geniatech Europe GmbH Address: Kaiserstrasse 100 (TPH 3) 52134 Herzogenrath, Aachen, Germany 1. Sensor signal test 1.1 Install BLE debugging assistant (base.apk) 1.2 Filter settings Purpose: Screen out ROOQ sensors to be tested Clickthefilterbutton SetthefilternametoROOQandRSSIto45db Afterthesettingiscompleted,refresh,thescannedROOQsensoris
within10cmofthemobilephone
The device has been evaluated to meet general RF exposure requirement.