all | frequencies |
|
|
exhibits | applications |
---|---|---|---|---|---|
manuals |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 2 |
|
Users Manual I | Users Manual | 2.08 MiB | ||||
1 2 |
|
Users Manual II | Users Manual | 639.00 KiB | ||||
1 2 | Cover Letter(s) | |||||||
1 2 | Block Diagram | |||||||
1 2 | Block Diagram | |||||||
1 2 | Cover Letter(s) | |||||||
1 2 | External Photos | |||||||
1 2 | ID Label/Location Info | |||||||
1 2 | Internal Photos | |||||||
1 2 | Operational Description | |||||||
1 2 | Test Report | |||||||
1 2 | Test Setup Photos |
1 2 | Users Manual I | Users Manual | 2.08 MiB |
Advanced Wireless Security Panel Software Manual September 2009 Pursuant to FCC 15.21 [ 54 FR 17714 , Apr. 25, 1989, as amended at 68 FR 68545 , Dec.9, 2003], changes or modifications made to equipment, which are not expressly approved by Rosslare Enterprises, Ltd., may void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help. Table of Contents Table of Contents 1. 2. 3. 4. 5. 6. TM Basic Concepts Running the Software The HomeLogiX Main Window Main Tasks Introduction 1.1 Remote PC Activities Installing HomeLogiXTM 2.1 System Requirements 2.2 Installing the Software Getting Started 3.1 3.2 3.3 3.4 Creating and Managing Panel Accounts 4.1 4.2 4.3 4.4 4.5 Editing a Panel Account 5.1 Account Information 5.2 Zones 5.3 Enrollment 5.4 Security 5.5 Communications 5.6 Automation 5.7 Messages Communicating with the Panel 6.1
............................................................................. 4
........................................................ 4
........................................................ 5
...................................................... 5
...................................................... 5
........................................................................ 7
............................................................... 7
....................................................... 7
....................................... 9
...................................................................... 10
............................ 11
................................................. 11
..................................... 12
............................................... 12
............................. 13
.............................................. 15
....................................................... 16
...................................................... 16
............................................................................. 17
...................................................................... 17
.......................................................................... 19
........................................................... 21
.................................................................... 24
....................................................................... 26
............................................ 27
............................. 27 Creating a Panel Group Creating a New Panel Account Saving the Configuration Changing an Existing Panel Account Deleting a Panel Account Setting the Panel Authorization Code HomeLogiX Software Manual Page ii Table of Contents Uploading from a Panel Downloading to a Panel Refreshing the Properties Uploading the Date and Time from a Panel Downloading the Date and Time to a Panel Restoring the Panel to Factory Defaults Disconnecting a Panel 6.2 6.3 6.4 6.5 6.6 6.7 6.8 Viewing System Information 7.1 7.2 7.3 7.4 7.5 7.6 Configuring the System 8.1 General Options 8.2 Communication Options Performing Database Backup 9.1 Backing up the Database 9.2 Restoring the Database
................................................. 27
................................................ 29
................................................ 30
.................. 30
.................. 31
.......................... 32
................................................... 32
................................................ 33
............................ 33
................................................... 33
........................................... 34
....................................... 35
................................ 35
................................................. 36
........................................................ 38
............................................................ 38
............................................... 41
.............................................. 43
.............................................. 43
................................................. 43
.......................................... 45 Viewing the Panel Account Properties View the System Status Applying Actions via the PC Refreshing the Panel Manually Refreshing the Panel Automatically Viewing the Events Logs Technical Support 7. 8. 9. Appendix A. Page iii HomeLogiX Software Manual Introduction 1. Introduction The HomeLogiXTM Remote Programmer (referred to as HomeLogiXTM) is a software application designed to support installers of the HomeLogiXTM Wireless Panel (referred to as wireless panel). HomeLogiXTM allows its users to define the configuration for a wireless panel, edit the configuration and download it to the wireless panel. HomeLogiXTM displays currently defined wireless panels and the properties for each panel. HomeLogiXTM allows the installer to upload the current wireless panel configuration and make changes. The installer can then download the new configuration to the wireless panel. The wireless panel can be connected to HomeLogiXTM either directly via an RS-232 cable and Rosslare's MD-14 RS-485 to RS-232 converter or remotely using a modem. See the HomeLogiXTM Installer Guide for more details on connecting the wireless panel to HomeLogiXTM. 1.1 Remote PC Activities The following are remote PC Activities which can be performed via the HomeLogiXTM PC Software:
Arming Away Arming Home Disarming Set bypass to zone Remove bypass indication from zone Turning on or off a PGM device Note:
HomeLogiXTM now enables remote actions when the panel is armed. HomeLogiX Software Manual Page 4 Installing HomeLogiXPTM 2. Installing HomeLogiXTM This chapter describes how to install HomeLogiXTM. 2.1 System Requirements Hardware Requirements Pentium 4 or higher Minimum 256MB RAM 100MB available Hard Disk space One available serial COM port Software Requirements Microsoft Windows 2000, NT , XP Ancillary equipment Rosslares MD-N33 or similar third party modem Telephone cable (2-wire to RJ-11) for working in remote mode Rosslare's MD-14 RS-485 to RS-232 converter Installing the Software 2.2 The following describes how to install HomeLogiXTM. To install HomeLogiXTM:
1. From the CD provided, double click on the file HomeLogiXSetup.exe. The Select Target window is displayed. Page 5 HomeLogiX Software Manual Installing HomeLogiXPTM Figure 1 - Select Target Window 2. Click Browse to change the destination folder. 3. Click Install to begin the installation. The installation runs and then the Completed window is displayed. Figure 2 - Installation Completed Window 4. Click Close to complete the installation. HomeLogiXTM is successfully installed. HomeLogiX Software Manual Page 6 Getting Started 3. Getting Started This chapter explains what you need to know before using HomeLogiXTM. 3.1 Basic Concepts HomeLogiXTM is a Microsoft Windows application used to manage wireless panels installed in various locations. The user creates a panel account for each owner of a wireless panel. The panel account holds all the configuration information for a specific wireless panel. The configuration can then be downloaded to the wireless panel via a direct connection to the PC or remotely using a modem. The user can also connect to a wireless panel to check its live status, events log and to make changes to the configuration. 3.2 Running the Software The following section explains how to run HomeLogiXTM. To run HomeLogiXTM:
1. From the Start menu, select Programs > Rosslare > HomeLogiXTM Remote Programmer > HomeLogiXTM Remote Programmer. The Login window is displayed. Figure 3 - Login Window 2. The first time you run HomeLogiXTM, the default User Name master and password xxxxxxxx are displayed. Click OK. The first time you run HomeLogiXTM you will be asked to change your user name and password. Page 7 HomeLogiX Software Manual Getting Started Figure 4: Change Login Details dialog 3. Enter the new user name and new password. Confirm new password and click OK. Verify that the new user name and password have been changed successfully. The application starts up and the HomeLogiXTM Remote Programmer window appears. See The HomeLogiX Main Window on page 9. TM 4. After running the HomeLogiXTM Remote Programmer with the changed user details, enter the User Name and Password and click OK. The HomeLogiXTM Remote Programmer window appears. See The HomeLogiX Main Window on page 9. TM HomeLogiX Software Manual Page 8 Getting Started 3.3 The HomeLogiXTM Main Window
Figure 5: HomeLogiXTM Remote Programmer Window
The HomeLogiXTM main window is used as a central place for accessing all the features and options available. The HomeLogiXTM Remote Programmer window contains the following areas:
1 Menu bar Access main options. 2 Toolbar Quickly access frequently used operations. 3 Panel Tree Contains the panel accounts and groups already defined in the system. Displays properties of the current selection in the left pane. Gives assistance by displaying a short description of the field you are in. 6 Status bar Displays the current communication status of the system. The example above shows a panel account that has been defined in the system. Panel accounts are listed in the panel tree on the left. The Properties Area on the right displays the properties for the selected panel. 4 Properties Area 5 Assistance bar Page 9 HomeLogiX Software Manual 3.4 Main Tasks These are the main tasks you need to perform to get started usi HomeLogiXTM. Each task is d Managing Panel Accounts on page 11. escribed in detail in the chapter Creating and ng Getting Started Creating a Panel Group (on page 11) creates a panel group s o you can organize your panel accoun reating a New Panel Account (on p ts. l age 12) creates a new pane C account for an owner of a wireless panel. Saving the Configuration (on page 12) saves the configuration fo r a panel account. Changing an Existing Panel Account (on page 13) lets you make changes to t he properties of a panel account. HomeLogiX Software Manual Page 10 Creating and Managing Panel Accounts 4. Creating and Managing Panel Accounts ing panel accou Creating a Panel Group can organize panel accounts in the Panel Tree accord ps. For example, you can create a group for your corp This chapter describes how to create and manage panel accounts. 4.1 You grou accounts and another group for your private home panel accounts. nts can be copied into a panel group using the Edit Exist Menu commands or by right clicking on a panel account and using the edit commands. To add a new panel group:
1. In the Panel Tree, right click on the place where you want to add a panel group. The right click menu is displayed. ing to panel orate panel Figure 6 - Right Mouse Menu - Add New Panel Group 2. Click on Add New Panel Group. 3. A new panel group is added at the mouse position. In the edit field that appears, enter the name of the panel group as Private Homes. such Figure 7 - Add New Panel Group Note:
You can also change the panel account name at any time by right clicking on the name of the panel and choosing Rename. Page 11 HomeLogiX Software Manual Creating and Managing Panel Accounts 4.2 Creating a New Panel Account You create a new panel account for every owner of a wireless panel. To create a new panel account:
1. From the Panel Account menu, select New. Alternatively, you can right-click on Panel Groups in the Panel Tree and select Add New Panel Account from the dropdown menu. Under Panel Groups, a new panel account is added. In the edit field that appears, enter the name of the panel account such as Office. 2. Figure 8 - New Panel Account 4.3 Saving the Configuration Saving the configuration, saves any changes made to the selected panel account. To save changes made to a panel account:
In the Panel Tree, select the panel account to save. 1. From the Panel Account menu, click Save Configuration. You can also 2. save changes in a panel account by right clicking on the panel account and choosing Save or from the toolb In the status bar the message Panel saved appears. ar. HomeLogiX Software Manual Page 12 Creating and Managing Panel Accounts Figure 9 - Status Bar - Panel Saved e In the ation and defines e applic change pro 4.4 Changing an Existing Panel Account You can change the properties for each panel account. This is the main the behavior of the wireless panel. aspect of th You cannot To change an 1. 2. Under the pane account name, select the item to change (for Panel Tree, select the panel account to change. xisting panel account:
perty items that are grayed out. l example, Accou In the right pane type the information in the property fields. Once you hav made a change to a panel account, the sta e displays Panel m the Configuratio odified until you save the configuration (see Sav n on page 12. nt Information). tus bar 3. ing Page 13 HomeLogiX Software Manual Creating and Managing Panel Accounts Figure 10 - Status Bar - Panel Modified These are the panel account properties available for editing. They are described in further details later in this guide. anel account ss panel. Description Details about the owner of the p plus information about the wirele Section Account Information on Page 16 Zones on page 17 Details about the Zone type and description. Enrollment on page 17 Security on page 19 Details about each enrolled detector. Settings to automatically arm or disarm the wireless panel for specific days and times. Settings for the time delay before activating the alarm state. Communications on page 21 Automation on page 24 Communication settings between the Central Station and the wireless panel. Details of private phone numbers that can be called by the wireless panel. Settings for up to two external devices, called PGMs that can be controlled by the wireless panel. HomeLogiX Software Manual Page 14 Creating and Managing Panel Accounts Description Settings for the Keypad tone function as well as defining custom zone descriptions Section Messages on page 26 4.5 Deleting a Panel Account The following describes how to delete a panel account. For example, need to delete an account when the owner removes the wireless pa from the premises. To delete a panel account:
1. 2. In the Panel Tree, select the panel acc From the Edit menu, click Delete or right click on the panel acco and select Delete from the menu. The following warning window is displayed. ount to delete. you nel unt Figu
. Click Yes t re 11 - Delete Pan o delete the select el Account Warn ed panel account. 3 ing Window Page 15 HomeLogiX Software Manual 5. Edit ing a Pa nel Account Editing a Panel Account riou escribes the va is chapter d Th p anel account. 5.1 Account Informatio Account Information contains de formation abo lus in account p ut th wners general d o includes the et version of the wire less panel. count Information:
To access Ac s properties that you can modify for a n tails about the owner of the panel e wireless panel. Account Information ails and the hardware and software Click on a panel account in the Panel Tree and then click Account Information below the panel account name. After modifying the properties, remember to save the configuration (see Saving the Configuration the properties you shou wireless panel (see Downloading to a Panel on page 29). The following properties are available unde ld also download the latest configuration to the Once you have finished modifying r Account Information:
on page 12). Section Owner Information Panel Information Property Item Owner Name Description The name of the person w panel account. ho owns the nel Own Phon Own er Mobile e er Address telephone number of the panel ner. Owner Telephone The ow The mobile phone number of the pa owner. The address of the premi wireless panel is installed. The firmware version of the wireless panel. This item cannot be changed. The firmware version of the dialer component of the wireless panel. This item cannot be changed. The date format displayed by the pan DD = Day of the month
(01-31), MM =
month (0-12), YY = year (last two digits). el Firmware ion r Firmware ion Pan Vers Diale Vers ses where the Format Date el. HomeLogiX Software Manual Page 16 Editing a Panel Account Section Property Item Time Format Installer Information Installer Code Description
. The time format displayed by the panel HH = hours (0-23), hh = hours (00-12), mm
= minutes (00-59). Note: 00:00 = 12:00AM and 12:00 =
12:00PM. The 4 digit access code of the installer. es o forty you can specify the type of nsing device. You can define up t r each zone eter) as well as giving it a meaningful om. 5.2 Zon A zone is an area secured by a se zones for each panel account. Fo im zo ne (for exa descript dro ion su o access T Click belo A dify fter mo Sa ving the C the propertie wireless pan Th e following mple, interior, per ch as attic or be Zones:
t in the Panel Tree and then click Zones on a panel acco un n w the panel accou t name. member to save the configuration (see ing the properties, re e 12). Once you have finished modifying g onfiguration on pa wnload the latest configuration to th s you should a lso do el (see Dow properties are available under Zones:
nloading to a Panel on page 29). e Zone Description roperty P Zone Type Item Descripti n o You can choose from the following Type of zone
. or, Perimeter, Delay, Fire 24-Hour, 24-Hou options: Inte ri r r Audible, Chime Silent, 24
-Hou n of the zone. You can choose from a The descriptio predefined lis t or you can create up to five custom descriptions. The type o f th changed. No Activity hecks The default
(version 2 and up) disabled. If No Activity Checks is enabled ctivity Timer is enabled, checks for no erformed for this zone. e chime played when zone options are is and the No A are p activity Chime Type C
.3 Enrollment 5 The installer must enroll every detector using the wireless panel. Once each detector is enrolled, upload the panel and the enrolled detectors. The detectors are listed in the Enrollment section. Page 17 HomeLogiX Software Manual Editing a Panel Account To access Enro llment:
Click on a panel account in the Panel Tree and then click Enrollment below the panel account name. After modifying the properties, remember to save the configuratio Saving the Configuration on the properties you should al wire ss p The following properties are available under Enrollment:
anel (see Downloading to a Panel on page 29). page 12). Once you have finished modifying so download the latest configuration to the n (see le Section Property Item Description Detector Detector # Type The device family type for the detector of the zone. This item cannot be changed. The identification number for the wireless detector. This item cannot be changed. Allows you to enable or disable the use of a wired detector The identification number for the remote control. This item cannot be changed. Set the function for the remote con trol panic button to activate the PGM. Set the function for the remote control rol #
ction on button to activate the PGM. rol #
ction rol #
n Set the function for the remote control off button to turn off the PGM. Set the function for the remote control home (partial) button RF ID The identification number for the iButto n. or the remote This item cannot be changed. The identification number f keypad. This item cannot be changed. The identification number for the repeater. This item cannot be changed. The identification number for the wireless siren. This item cannot be changed. Detector # RF ID Detec tor 40 (Wired) rol #
ol #
ont Remote Controls Remote C RF ID r Remote Cont n Panic Butto Function Remote Cont Fun On Button Remote Cont Off Button Fun Remote C ont
"Home" B utto Function s iButton Key #
utton Key iB Keypad # RF Remote Keypads Repeaters Repeater # RF ID ID RF Siren # ID Wireless Sirens HomeLogiX Software Manual Page 18 urity Editing a Panel Account 5.4 Sec You can set the wireless panel to automatically arm or disarm for specific nd ti days a tate alarm s activating t o acces T so set the time delay before activating the an al mes. You c an enter and exit the premises without er c so the own
. tate he alarm s s Security:
Click on a panel a curity below th fying the prope tion (see Configuration on page 12). Once you have finished modifying Se After modi Sa ving the also download the late the properties you should ading to a Panel on page 29). nel (see Dow a wireless p nlo r e available under Security:
g properties a The follow in ccount in the Pa e panel account name. rties, remember to save the configura nel Tree and then click st configuration to the Section Property Description Item Exit Delay
(seconds) Entry Delay
(seconds) Arm Mode Arm Time Delays rming ay) Auto-
A
(D Disarm Time During this period (1-99 seconds) after arming, a zone violation will not set the alarm state. During this period, a user may exit the premises. In the armed mode, this is the delay time between violation of a zone and an alarm event. During this period (1-99 seconds) a user may disarm the panel. The mode for this auto arming schedule. Th options are: Disabled, Home or Away. e The time for automatically arming the wireless panel for this day of the week. The time for automatically disarming the wireless panel for this day of the week. If the disarm time is prior to the arm time, disarm is performed on the following day. Page 19 HomeLogiX Software Manual Section Property Description Editing a Panel Account Sirens G eneral S ecurity Set tings Item Siren Time
(Minu tes) Sirens Mode Wired Siren Relay Polarity Internal Siren Supervision Time (Hours
) Jamming Detection ity ours) No Activ Timer (H
(version 2 and up) ally Closed. The number of minutes (0-99) to sound the sirens in case of an alarm. The sirens will be activated if the specified arming mode is set. The options are: Away, Away + Home. The polarity of the wired siren. The options are:
Normally Opened, Norm The status of the internal siren. The options are:
Enabled or disabled. If this number of hours elapsed and HomeLogiXTM did not receive any message from a zone, a zone trouble event will triggered. The options are: 1, 2, 4, 6, 8, 16, 24,
. and 48 Defines the method used to detect attempts to jam the RF signals from its enrolled detectors. The options are: Disabled, UL Enabled, and EN Enabled. If the timer i for the specified number of hours for any of the zones where no activity check is enabled, a trouble event is reported. The options are:
Disabled, 1, 2, 5, 10, 15, and 30. s enabled and there is no activity be Trouble Beeps If enabled, beeps are generated during system Bypass Options Quick Arm Panic Button Duress Code Alarm Cancel Time (Minutes)
: Off, Manual, Force. trouble. The options are: Enabled or Disabled. The method of setting a zone as bypassed. The options are If enabled, HomeLogiXTM may be armed without entering a user code. The options are:
Enabled or Disabled. If enabled, pressing the panic button will be reported (with a chime if the Audible value is selected). The options are: Disabled, Audible, and Silent. The duress (forced disarm) code - 4 decimal digits. During this time window (0-60 minutes), after an alarm started, a disarm will result in an Alarm Cancelled message sent to the Central Station. HomeLogiX Software Manual Page 20 Editing a Panel Account Section Property Description Item Alarm Ab Time
(Seconds) ort If an alarm is triggered, the alarm message to the sec ab bu Backlight Time Tim Alw If O arm opt If On, each press of a key on the panel keypad will beep. The options are: On or Off. Central Station is delayed for this number of onds (0-60) in order to allow the user to ort it via disarm. This is effective only for rglar type of zones. e the backlight remains on. The options are:
ays or 15 seconds. n, HomeLogiXTM ed and shows only the prompts. The ions are: On or hides its status display when Hide Display Key Bee Off. ps tions Communica 5.5 You can define the details for the communications between the Central at is monitoring the w Station th less panel itself. ireless panel and the wire o define private p ou can al hone numbers and a paging service that Y by the wireless panel. an be c c alled s Note:
r settings that can be ch The only details o anged by the re almost entirely changed only by the u a ser, and which i nstaller, a re of the following nature. Adding a new detector, sensor o r remote control, or removing an exis one. ting A Sa th w unica tions:
To acces s Comm Cl ick on a panel account in the Panel Tree and then click mmunications below the panel account name. o C fter modif y ing the properties ving th e C onfiguration on p e prop h es you s erti ould also ireless pa el (see Dow n nload Note:
For the unit to accept the communication changes you m then exit to update the dialer with the configuration changes.
, remember to save the configuration (see age 12). Once you have finished modifying download the latest c ing to a Panel on page 29). installer programming on the panel itself, onfiguration to the ust activate the Page 21 HomeLogiX Software Manual The following properties are a vailable under Co Editing a Panel Account mmunications:
Section Property Description Panel Phone P rivate R eporting Central Station
(C S) S ettings Item Panel Phon e ed The telephone number used to connect to the wireless panel. The phone number to call when the select event occurs. The phone number to call when the selected event occurs. The phone number to call when the select event occurs. Private Phone 1 Number Private Phone 2 Number Private Phone 3 Number Note:
When using a PABX type the number for an outside line then , followed by the telephone number. Private Reportin Options The list of event types that are reported to the private phone numbers specified. The options are: Alarms, Troubles, Alerts, Bypass, Arm/Disarm, Restore. ed g Dialing Attempts The number of attempts (1-5) the panel wil l CS Connection Method make in order to connect to a specified private phone number before trying the next private phone number. This option specifies which phone numbe r the panel uses to connect to the Central Station. The options are: Primary Only, Alternate, Secondary Only, and Both. The primary phone number used for the panel to connect to the Central Station. outside line Primary Phone Number Note:
When using a PA BX type the number for an then , followed by the telephone number. Primary Account Code Primary Reporting Options The account code for the primary Central Station connection. The list of event types that are reported to the Central Station using the primary number. The options are: Alarms, Troubles, Alerts, Bypass, Arm/Disarm, and Restore. The secondary phone number used for the panel to connect to the Central Station. The account code for the secondary Central Station connection. Secondary Phone Number Secondary Account Code HomeLogiX Software Manual Page 22 Editing a Panel Account Section Property Description Two Way Voice
(2WV) Setup Page 23 Item Secondary Reporting Options The list of event types which are reported the Central Station using the secondary number. The options are: Alarms, Troubles, Alerts, Bypass, Arm/Disarm, and Restore. to Reporting Mode This mode defines whether a message Reporting Protocol Dialing Attempts Days Between Line Tests Line Tests Time AC Fail Reporting Delay
(Minutes) CS 2WV Mode a he rted reported to the Central Station will include single event or multiple events. Defines the structure of the repo messages. Current Option is: Contact ID The number of attempts (1-16) made by t o connect to the Central Station. panel t The number of days (1-30) between tests of the line connecting to the Central Station. The time of day for testing the line to the Central Station. The power failure before this event is repo
(assuming the AC power did not retu during this period Define the way 2-Way Voice commun is made, and set the preferences for th feature. number of minutes (0-240) after an AC rted rn
). ication is Installer can Enable/Disable the 2-Way Voice Mode of the system in this menu via the PC
. Click the drop-down menu and select which option you want to use. CS 2WV Timeout The Time that the HomeLogiX
(Seconds) Note:
2WV actions from the CS. panel waits for 1. The reporting mode in Central Station (CS) Settings must be set to: "Multiple Events". 2. After changing any communication parameters via the PC software, the installer must enter the installer mode, and then return Normal mode in order for the new communication parameters to take effect. HomeLogiX Software Manual Item Miscellane Fax Def ous Mode c Communi tions a Settings Section Property Description Editing a Panel Account at e If enabled, the panel recognizes when a caller disconnects after one or two rings and answers the next inco ming ring immediately. Number of Rings The number of rings (1-15) detected by a it answers an incoming call. ed to authenticate panel before The code us communications with the panel. This code must be the same as the Panels master code. Up/Downloa d Authoriz ation Code u 5.6 A tomation The wireless panel can c To access Automati Click on a pane Automation belo utomation properties in Automation Sett activated direct PG ber (#
device. M Num A ontrol up to two external devices, called PGMs. on:
l account in the Panel Tree and then click w the pane clude these sections:
ings on page 25 for enabling PGMs to be ly from
) on page 25 the settings for the external the wireless panel. l account name. fying the onfigu ties you s fter modi ving the C e proper prop A ration Sa hould th wireless panel (see Down he following T are the erties, remember to save the configuration (see on page 12). Once you have finished modif also download the latest configuration to th loading to a Panel on page 29) ying e propert ies available under automation:
HomeLogiX Software Manual Page 24 Editing a Panel Account Auto ation Settings m Property Item Panel Keypad PGM Function PGM Number (#) Description If e fro nabled, you can activate the PGMs directly m the panel keypad. Section Property Description Pulsing Triggers Item Pulse Time
(Seco nds) Arm A way Arm H ome Di sar m Alarm Panic Trouble AC Loss Remote Control #
Panic Zone #
Opened or Detected p panel On, Off seconds that the will execute when the panel The options are Ignore, On, Off and ion this PGM will execute when the pane l d away. The options are Ignore, On, O ff lse. ion this PGM will execute when the d home. The options are Ignore, lse. ion this PGM The amount of time (1-99) in PGM erforms pulsing. The act i s arme and Pu Th e act is arme and Pu The act is disarmed. Pulse. The act is signal The ac is signal ns are Ignore or Pulse. The action this PGM will execute when the trouble is signaled. The options are Ignore or Pulse. The action this PGM will execute when AC loss is signaled. The options are Disabled or Enabled. The action this PGM will execute when this remote control sends a panic message. The options are Ignore, On, Off, Pulse and Toggle. The action this PGM will execute when this zone is either opened or detected. The options are Ignore, On, Off, Pulse and Toggle. See Zones on page 17 for a description of Zones. ion this PGM will execute when the ed. The options are Enabled o tion this PGM will execute when th ed. The optio alarm r Disabled. e panic Page 25 HomeLogiX Software Manual Editing a Panel Account 5.7 Messages The messages section allows setting the keypad tone function defining custom zone descriptions. See Zones section on page 17 for more information on Zones. To access Messages:
as well as Click on a panel account in the Panel Tree and the n click Messages below the panel account name. After modifying the properties, remember to save the configuration (see Saving the Configuration on page 12). Once you have finished modifying the properties you should also download the latest configuration to the wireless panel (see Downloading to a Panel on page 29) The following properties are available for M Section Description essages:
Property Item Panel Keypad Mute Funct ion Zone Description
Options Custom Zone Custom Descriptions the numeric key 5 When enabled, acts as a mute button for the system beeps and voice announcements when the system is in disarmed mode. The can be set. re are five custom zones that A customized description may be assigned to one of the zones
(maximum of 16 printable ASCII characters). HomeLogiX Software Manual Page 26 Communicating with the Panel 6. Communicating with the Panel This chapter describes how to communicate with a wireless panel and the actions that can be performed. 6.1 Setting the Panel Authorization Code The authorization code is used to authenticate communications between HomeLogiXTM software and the HomeLogiXTM wireless panel. You need to set the panel authentication code in the panel account before performing any type of communication between the panel and the PC. See the Communications section on page 21, specifically Up/Download Authorization Code paragraph. 6.2 Uploading from a Panel You can upload the current information defined for a wireless panel in order to view and modify the existing configuration. There are two ways of uploading from a panel:
Uploading from a local panel the panel is conne ed directly to the PC. Uploading from remotely via a modem. from a panel:
a remote panel the panel is connected ct Tree, select the panel account from which to upload. In the Panel From the Upload From menu, choose either Local Panel or Remote Panel. You can also access Upload from the toolbar button. The Upload window is displayed. To upload 1. 2. Page 27 HomeLogiX Software Manual Communicating with the Panel Figure 12 - Upload Window 3. Check the items to include in the upload and click OK. These are the same options available in the Panel Tree. The following the panel. window is displayed while the software is connecting to Figure 13 - Retrieving Panel Information Window HomeLogiX Software Manual Page 28 Communicating with the Panel The Upload Preview window is displayed and lists all of the uploaded items that have different values from the current panel. Figure 14 - Upload Preview Window 4. Uncheck any items you do n ot wish to save in the current panel and click OK. The current panel account is updated wi th the uploaded information. can download the information in HomeLogiXTM to a wireless panel. Downloading to a Panel 6.3 You To download to a panel:
1. y ed to the PC or Remote Panel if the panel is connected via a From the Download To menu, select Local Panel if the panel is directl connect network. The Download window is displayed. 2. Page 29 HomeLogiX Software Manual Communicating with the Panel Figure 15 - Download Window 3. Check t e items to include in the download and click OK. h The panel i s updated with the downloaded information. Refreshing the Properties 6.4 You can refresh the properties in the panel account to ensure they have been updated from the database. To refresh the properties:
1. From the Actions menu, select Refresh. You can also access Refresh by clicking on the toolbar b All the properties in all the accounts are refreshed fro utton. m the database. a wireless panel to verify if they Uploading the Date and Time from a Panel can upload the date and time from correct. 6.5 You are To upload the date and time from a panel:
1. 2. In the Panel Tree, select the panel account. From the Actions menu, click Upload Date / Time. You can also activate this command by right-clicking on the panel account and choosing Upload Date / Time. The following window appears while connecting to the panel. HomeLogiX Software Manual Page 30 Communicating with the Panel Figure 16 - Upload Date and Time Window The following window appears. The date and time from the panel ar uploaded and the panel account properties updated. e d that the date and time were incorrect, you can downlo e and time to the wireless panel. You can use either the PC clock 3. Click OK. 6.6 Downloading the Date and Time to a Panel You can download the date and time to a wireless panel. For example if you previously uploaded the date and time from a wireless panel and confirme new dat dat e and time or you can choose any other date and time. To download the date and time from a panel:
1. 2. I n From the Actions menu, click Download Date / Time. You can also activate this command by right-clicking on the panel account and choosing Download Date / Time. The following window appears. the Panel Tree, select the panel a ccount. ad a Figure 17 - Download Date and Time Window Page 31 HomeLogiX Software Manual Communicating with the Panel 3. You can check the box to synchronize the Date/Tim you can uncheck this option and select a date/tim calendar. 4. Click OK. e with the PC or e from the The date and time from t application are downloaded to the wireless panel. he HomeLogiXTM Remote Programmer efaults 6.7 Restoring the Panel to Factory D You can restore an account p anels settings to the factory defaults. For example, you can use this feature for troubleshooting, by returning the panel to the factory defaults and then changing one setting at a time. To restore t 1. 2. In the P From the Actions menu click Restore c n also activate this command by a account and choosing Restore Panel to Factory Defaults. Panel to Factory Defaults. You right-clicking on the panel he panel to factory defaults:
anel Tree, select the account panel. Figure 18 - Restore Factory Defaults Warning Window The account panel properties are returned to their factory default state. 6.8 Disconnecting a Panel When the HomeLogiXTM Remote Programmer application has connected to a wireless panel, most actions are not available until you disconnect from the wireless panel. Use Disconnect after performing an upload or download operation. To disconnect from a panel:
1. 2. In the Panel Tree, select the panel. From the Actions menu, click Disconnect. You can also disconnect by click the Disconnect button on the toolbar. The panel is disconnected. HomeLogiX Software Manual Page 32 Viewing System Information 7. Viewing System Information This chapter describes how to view live system information from a wireless panel. 7.1 Viewing the Panel You can view the properties of a panel account. To view the properties:
Account Properties In the Panel Tree, select the account panel. Alternatively, from the View menu, click on Properties. The properties for the selected panel are d Area. isplayed in the Properties e system status for a panel:
ect the account panel. 7.2 View the System Status The system status allows you to check the live status of a wireless panel. To view th 1. 2. In the Panel Tree, sel From the View menu, click System Status. This action can also be accessed by right clicking System St The Properties Area displays the System Status for the panel. atus or by clicking the button on the toolbar. on an account panel and choosing View Figure 19 - View System Status Page 33 HomeLogiX Software Manual The View System Status wind ow includes the following areas:
Viewing System Information tus of the panel in text, including nd RF Jam in the colored check-
Panel Status Displays the sta power, tamper, low battery a box. PGM Status Displays the PGM status of PGM1 and PGM2 in the colored check-boxes. Panel Legend Displays the Le as shown in columns A/O, T, B, S and X. Date/Time Displays the panel date/time. gend of the mapped system information Actions Buttons enable acti ons to be performed on the panel, such as Arm Home, Arm Away, Disarm. 7.3 Applyin You can use the HomeLogiXTM PC itself (see Figure 19). g Actions via the PC Software to run actions on the Panel Arm Home To arm home:
In View System Status screen, in Acti Arm Home button. ons window, click the Arm Away To arm away:
iew System Status screen, in Actions window, click the In V Arm Away button Disarm To disarm:
In View System Status screen, in Actions w Disarm button. indow, click the Bypass Zone To bypass a zone:
In View System Status screen, in Actions window, select the zone number from the drop-down list, and then click Bypass button. HomeLogiX Software Manual Page 34 Viewing System Information Restore Bypassed Zone To restore a bypassed zone:
In View System Status screen, in Actions window, select the zone number from the drop-down list, and then click UnBypass button. Turn PGM On To turn ON a PGM 1 or 2:
In View System Status screen, in Actions window, click the On button of the relevant PGM. Turn PGM OFF To turn OFF a PGM 1 or 2:
In View System Status screen, in Actions window, click the Off button o f the relevant PGM. 7.4 Refreshing the Panel Manually You can refresh the panel manual using the System To refresh panel status manually:
Toolbar. In the Toolbar, click the Live System View button. 7.5 Refreshing the Panel Automatically Y ou can set automatic panel refresh sessions by following the next procedure. To refresh panel status automatically:
1. 2. In the Toolbar, cl In the Tools menu, view select Syst The System em View. View window is displayed. ick the Disconnect select Options, and then in the General tree button. Page 35 HomeLogiX Software Manual Viewing System Information Figure 20 Refreshing Automatically 3. 4. Select Continuous Retrievals Select Frequency of Retrievals (seconds). Note:
Please use a "Frequency of Retrievals" value greater then 3. 7.6 Viewing the Events Logs All actions that take place in HomeLogiXTM are saved in the Events log. You can view the Events log for the following:
Last 20 events Last 50 events All events To view the Events Log:
1. 2. Choose the Events log option to display. From the View menu, click Events Log. The Events log is displayed in the Properties Area. HomeLogiX Software Manual Page 36 Viewing System Information The Event Log window includes the following information:
Figure 21 - View Events Log Event No. Displays the event number and the severity level color. Event Type The event type displays the type of event reported by the system. Reported By The zone which reported the event is displayed in this column. Event Time The time the event took place is displayed in this column. Page 37 HomeLogiX Software Manual Configuring the System 8. Configuring the System This chapter describes the options available to configure your HomeLogiXTM application. You can set the options from the Tools menu by clicking on Options. 8.1 General Options The general options include these sections:
eous on page 39 Miscellan User Login below Languages on page 39 System View on page 39 User Login In the User Log in options, you can change your user name and password. Figure 22 -User Login Options To change the user login:
1. In the User password and click Change. The User Information window is displayed. Login Information window enter the current user name and HomeLogiX Software Manual Page 38 Configuring the System Figure 23 - User Information Window 2. Enter the new user name and password. 3. Confirm the new user name and password and click OK. The user name and password are changed to the new user name and password. Languages In this version of HomeLogiXTM, English and Turkish are the only supported languages. Figure 2 4 - Langua ges Options System View In the System View options you can set whether to update information continuously from a wireless panel or to perform a single retrieval of information from the wireless panel. This option is used when a wireless panel is directly connected to HomeLogiXTM via a cable. If you set the Page 39 HomeLogiX Software Manual retrieval to be continuous, you can also set the frequency of retrievals in seconds. Configuring the System Figure 25 - System View Options llaneous options you can set an automatic save time, enable logging, set an idle time before logout and set warnings for long s Miscellaneou In the Misce session remote connections. Option Automatic Save of Panel Data Session Logging Idle Time Before Logout Warning about long remote connections Description Set how often to automatically save the panel account data. Set whether to enable session logging. Set after how much idle time to automatically logout. This option is only available under Microsoft Windows 2000/XP. Set the time to warn for a long remote connection and how often to display a warning. HomeLogiX Software Manual Page 40 Configuring the System Figure 26 - Miscellaneous Options 8.2 Communication Options You can set the communication options for both local and connection s. remote Local cal options, you can set the C Under Lo for a direct connection with the wirele om Port and the Device Type used ss pane l. Figure 27 - Local Communications Options Page 41 HomeLogiX Software Manual Remote Under Remote options you can change the modem settings. Configuring the System The following options are available under Remote opti ns:
Option Modem Name Com Port Dial ing o Description Displays the name for your modem. Choose a com port. Set the dialin pulse. Turn the modem speaker on or off. Set the timeout for a connection in seconds. Set the timeout for data transfer in seconds. g mode to be tone or Modem Speaker Connection Timeout (seconds) Data Transfer Timeout (seconds) HomeLogiX Software Manual Page 42 Performing Database Backup 9. Perfo rming Database Backup This chapter describes how to backup and restore the database. 9.1 Backing up the Database It is recommended to regularly backup your data. Backup Database creates an Application Backup File in c:\Documents and Settings\All Users\Application Data\Rosslare\ HomeLogiXTM Remote Programmer\Backups. Each time you do a backup, a new file is created in the directory. To backup the database:
1. In the menu, click Tools Backup Database. The following window appears. Figur e 28 - Database Backup Successful Win A zip file containing a backup of the database is cre c:\Documents and Settings\All Us HomeLogiXTM Remote Programmer\Backups. dow ated in ers\Application Data\Rosslare\
2. Click OK. 9.2 Restoring the Database You can restore the database from a backup. To restore the database:
1. he Tools menu, select Restore Database. From t The followi ng warning window appears. Figure 29 - Restore Backup Warning Window Page 43 HomeLogiX Software Manual 2. Click Yes. The Select backup file window is displayed. Performing Database Backup Figure 30 - Select Backup File Window 3. Select the backup file The following window appears. from the list and click Open. Figure 31 - Data Replacement Successful Window 4. Click OK. The database is now restored from the back up. HomeLogiX Software Manual Page 44 Performing Database Backup Appendix A. Asia Pacific, Middle East, Africa BTechnical Support Rosslare Security Products Headquarters 905-912 Wing Fat Industrial Bldg, 12 Wang Tai Road, Kowloon Bay Hong Kong Tel: +852 2795-5630 Fax: +852 2795-1508 E-mail: H Usupport.apac@rosslaresecurity.comU T United States and Canada 1600 Hart Court, Suite 103 Southlake, TX, USA 76092 Toll Free:+1-866-632-1101 Local:+1-817-305-0006 Fax: +1-817-305-0069 E-mail: H Europe Usupport.na@rosslaresecurity.comU T Global Technical Support & Training Center HaMelecha 22 Rosh HaAyin, Israel 48091 Tel: +972 3 938-6838 Fax: +972 3 938-6830 E-mail: H Usupport.eu@rosslaresecurity.comU T South America Pringles 868, 1640 Martinez Buenos Aires Argentina Tel: +54 11 4798-0095 Fax: +54 11 4798-2228 E-mail: H Usupport.la@rosslaresecurity.comU T Uwww.rosslaresecurity.comU T Web Site: H Page 45 HomeLogiX Software Manual 6 4 T T T T T 3 0
6 4 1 0 6 9 0
6 0 7 0 www.rosslaresecurity.com
1 2 | Users Manual II | Users Manual | 639.00 KiB |
SPN6G (HLX40) Advanced Wireless Security Panel Installation Manual May 2009 Table of Contents Table of Contents 3. 1. 2.2.1. INTRODUCTION.....................................................................................................5 1.1 General.............................................................................................................................5 1.2 Special Features ..............................................................................................................5 Information to User ........................................................................................................5 1.3 2. HOMELOGIXTM QUICK REFERENCE................................................................6 2.1 The Panel .........................................................................................................................6 2.2 The Keypad .....................................................................................................................7 Keypad Operated Functions........................................................................................................................ 8 2.3 Sound Indicators.............................................................................................................9 2.4 LED Indicators................................................................................................................9 SPECIFICATIONS ................................................................................................10 3.1 RF Data..........................................................................................................................10 3.2 Environmental Data .....................................................................................................10 3.3 Electrical Data...............................................................................................................10 3.4 Communication.............................................................................................................11 4. USER MENU STRUCTURE .................................................................................12 5. INSTALLATION ....................................................................................................13 5.1 Unpacking the Equipment ...........................................................................................13 HomeLogiXTM Package Content............................................................................................................... 13 5.2 Supply Power to the Unit .............................................................................................13 5.3 Planning & Programming............................................................................................13 5.4 Wiring the System.........................................................................................................13 5.4.1. Wiring the HomeLogiXTM ........................................................................................................................ 13 5.4.2. SIREN RELAY OUTPUT Wiring to External Siren................................................................................ 14 5.4.3. Wiring Auxiliary Outputs 1 and 2............................................................................................................. 14 5.4.4. Wiring the ZONE 1 Wired Input: ............................................................................................................. 15 5.4.5. Wiring the Wired Tamper Input................................................................................................................ 15 5.4.6. Wiring the HomeLogiXTM Telephone connectors .................................................................................... 15 5.5 Connect the AC Transformer......................................................................................16 5.6 Connecting to a Computer...........................................................................................16 5.7 Mounting the Back-plate..............................................................................................16 General...................................................................................................................................................... 16 Required Space ......................................................................................................................................... 17 5.8 Dismounting the Control Panel ...................................................................................18 5.9 Replacing the Backup Battery.....................................................................................18 PROGRAMMING HOMELOGIXTM .....................................................................19 6.1 Overview ........................................................................................................................19 HomeLogiX Installer Manual 5.7.1. 5.7.2. Page ii 5.1.1. 6. Table of Contents 7. 7.4.1. 7.4.2. 7.4.3. 7.4.4. 7.4.5. 6.2 Enrolling Wireless Devices and Remote Controls .....................................................19 INSTALLERS MENU ............................................................................................20 7.1 Accessing the Installer Menu.......................................................................................20 7.2 Change Code .................................................................................................................20 7.3 Zones ..............................................................................................................................21 7.4 Enrolling ........................................................................................................................22 Detectors................................................................................................................................................... 22 Remote Controls ....................................................................................................................................... 23 RF Siren.................................................................................................................................................... 23 Keypads .................................................................................................................................................... 24 Repeaters................................................................................................................................................... 24 7.5 Security ..........................................................................................................................24 Exit Delay ................................................................................................................................................. 25 7.5.1. Entry Delay............................................................................................................................................... 25 7.5.2. Auto Arming............................................................................................................................................. 26 7.5.3. Siren Time ................................................................................................................................................ 26 7.5.4. Siren Mode................................................................................................................................................ 26 7.5.5. Relay Polarity ........................................................................................................................................... 26 7.5.6. Local Siren................................................................................................................................................ 27 7.5.7. 7.5.8. Supervision Time...................................................................................................................................... 27 7.5.9. Jamming.................................................................................................................................................... 27 7.5.10. No Activity Time...................................................................................................................................... 27 7.5.11. Trouble Beeps........................................................................................................................................... 28 7.5.12. Bypass....................................................................................................................................................... 28 7.5.13. Quick Arm ................................................................................................................................................ 28 7.5.14. Panic Button.............................................................................................................................................. 29 7.5.15. Duress Code.............................................................................................................................................. 29 7.5.16. Alarm Cancel ............................................................................................................................................ 29 7.5.17. Alarm Abort Time .................................................................................................................................... 29 7.5.18. Backlight Time ......................................................................................................................................... 30 7.5.19. Hide Display ............................................................................................................................................. 30 7.5.20. Key Beeps................................................................................................................................................. 30 7.6 Communications ...........................................................................................................31 System Telephone..................................................................................................................................... 31 Private Report ........................................................................................................................................... 31 CS Report Setup........................................................................................................................................ 32 Line Test ................................................................................................................................................... 33 AC Fail Report.......................................................................................................................................... 33 2-Way Voice Behavior ............................................................................................................................. 33 Fax Defeat................................................................................................................................................. 34 Number of Rings....................................................................................................................................... 34 Select Region ............................................................................................................................................ 34 7.7 Automation....................................................................................................................35 Keypad Manual......................................................................................................................................... 35 Set Triggers............................................................................................................................................... 35 7.8 Messages ........................................................................................................................36 Keypad Mute ............................................................................................................................................ 36 House Name.............................................................................................................................................. 36 Custom Zones ........................................................................................................................................... 36 7.9 Maintenance ..................................................................................................................37 Factory Defaults........................................................................................................................................ 37 RF Test...................................................................................................................................................... 37 7.6.1. 7.6.2. 7.6.3. 7.6.4. 7.6.5. 7.6.6. 7.6.7. 7.6.8. 7.6.9. 7.8.1. 7.8.2. 7.8.3. 7.7.1. 7.7.2. 7.9.1. 7.9.2. Page iii HomeLogiX Installer Manual Table of Contents 7.9.3. 7.9.4. 7.9.5. Test Indicators........................................................................................................................................... 38 Sirens test.................................................................................................................................................. 38 Test Devices.............................................................................................................................................. 38 8. READING THE EVENT LOG ..............................................................................39 I.1 HomeLogiXTM Compatible Detectors .........................................................................40 I.2 HomeLogiXTM Compatible Remotes...........................................................................42 I.3 Other HomeLogiXTM Accessories................................................................................44 II.1 Default Zone Descriptions............................................................................................45 II.2 Custom Zone Descriptions ...........................................................................................45 II.3 Detector Deployment Plan ...........................................................................................45 II.4 Remote Control .............................................................................................................47 III.1 Reporting codes.............................................................................................................48 IV.1 Limited Warranty.........................................................................................................50 HomeLogiX Installer Manual Page iv INTRODUCTION INTRODUCTION 1. 1.1 General The HomeLogiXTM panel by Rosslare is the perfect wireless security system for intrusion protection of the home, or small office providing security monitoring and VIP Voice messaging. Users receive the latest RF technology in a wide selection of advanced wireless sensors and remotes, and benefit from smooth and easy operation of a large number of security and communication options. The HomeLogiXTM panel, while easy to install and set up, must be installed professionally via local programming and via direct or modem connection to a PC running the HomeLogiXTM PC Software. The Panel has two full split reporting features for communicating to central station for Contact ID + 2-Way Voice Enabled event reporting and vocal communications. This product has only one available channel. VIP features include Voice Assist, where the panel uses voice to prompt the user, Private Messaging to three destinations, with an optional 2-way voice session for every message. 1.2 Special Features Interactive telephone voice menu (Voice interactive system) 40 zones 39 wireless zones, 1 wired zone and tamper Supports 8 remote controls, 4 sirens and 4 wireless keypads Programmable remote-control buttons Flexible PGM automation features Five Custom textual and recordable zone descriptions Advanced testing and diagnostics options Remote (telephone) two-way voice and listen-in Programmable No Activity timer (Version 2.0 and up) 1.3 Information to User Pursuant to FCC 15.21 [ 54 FR 17714 , Apr. 25, 1989, as amended at 68 FR 68545 , Dec. 9, 2003], changes or modifications made to equipment, which are not expressly approved by Rosslare Enterprises, Ltd., may void the user's authority to operate the equipment. Page 5 HomeLogiX Installer Manual NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Page 5-1 HomeLogiX Installer Manual HOMELOGIXTM QUICK REFERENCE 2. HOMELOGIXTM QUICK REFERENCE This section provides a description of the control panel and the keypad. In addition, it also describes the chimes emitted when the buttons on the keypad are pressed. 2.1 The Panel Menu Menu Enter Enter Power indicator Status indicator Status indicator Keypad door Keypad door Display Display Local emergency Local emergency button button Local sounder Local sounder Microphone Microphone Figure 1: HomeLogiXTM Panel Use to navigate between menus. Power LED: Red Status LED: green On: system armed. Off: system disarmed. Flash: entry and exit delay (according to beep rate) Menu Power indicator Status indicator Keypad door Local sounder Open to access the keypad buttons System speaker Enables the recording of voice messages Microphone Local emergency button Keep pressed for 3 seconds to sound a standard panic alarm Display LCD display Enter Accept an entry or selection HomeLogiX Installer Manual Page 6 HOMELOGIXTM QUICK REFERENCE 2.2 The Keypad ABC DEF GHI JKL MNO PQRS TUV WXYZ MEM ESC Figure 2: Keypad The following table describes the keypad functions:
Key Menu Press to Navigate between User and Installer menus, and Normal mode. Navigate to the next menu or the next option within a menu. Accept an entry or selection. Enter Local emergency When pressed for 3 seconds a standard panic alarm Sounds Keys 0 - 9 Away Enter alphanumeric entries. Press 0 to enter a space. Arms all sensors and detectors for use when there is no one at home/office Home Arms all perimeter sensors and detectors as defined by the installer. For use when home/office is occupied Disarm Quick (Esc) Ignore an entry or move one level up in a menu. Disarms all armed sensors and detectors Page 7 HomeLogiX Installer Manual HOMELOGIXTM QUICK REFERENCE 2.2.1. Keypad Operated Functions When the system is idle, the alphanumeric keys initiate the following commands:
Press 0 1 2 3 4 5 6 7 8 9 To Memory Display Press once to display the alarms caused during the last arming period per zone. The first line of the displays shows the alarm memory, and the second line shows the zone description, event and time. The display toggles between zone description and the date by pressing the Enter button. Press Menu to display the next alarmed zone. Press Esc to exit. PGM ON Press once to enter PGM activation mode, the PGM status is indicated on the right. Press 1 to activate PGM 1 and/or 2 to activate PGM 2. PGM OFF Press once to enter PGM deactivation mode, the PGM status is indicated on the right. Press 1 to deactivate PGM 1 and/or 2 to deactivate PGM 2. Chime ON/OFF Manually toggle the chime on and off. Volume Manually toggle the beep volume level. Voice ON/OFF Manually toggle voice messages on and off. Bypass Enter the User menu Bypass option. Record User Message Record a voice message of up to 15 seconds. Press and hold key 7 for 3 seconds to erase a message. Event Log Display Press once to display the event log. The first line of the display shows the event log and the second line shows the zone description (or system, if a system event is displayed), event date and time. The display toggles between zone description and the date by pressing the Enter button. Press again or press Menu to display the next event. Press Esc to exit the menu. Note that a master code is required to access this function. Play User Message Listen to voice messages. HomeLogiX Installer Manual Page 8 HOMELOGIXTM QUICK REFERENCE 2.3 Sound Indicators Following are the sounds emitted by the system and push buttons:
Sound Single beep Long beep Two short beeps Button not pressed for a period of 30 seconds (except during test Sounded when A key is pressed An attempt is made to enter an invalid or unacceptable entry mode). The system automatically exits the current menu. An entry is successfully accepted. Three short beeps Nine short beeps Forced arming or zone bypass Four short beeps a minute Short beep every second Chime If enabled, on trouble condition. An exit/entry delay is activated. (Beep sounded every 0.5 seconds during last 10 seconds of delay. Activated 2.4 LED Indicators This section describes the LED indicators of the power and status indicators Behavior Red On when the system is ON. Green OFF when system is disarmed ON when system is armed. Flashing during entry/exit delay, according to the beep rate specified LED Power LED Status LED Page 9 HomeLogiX Installer Manual SPECIFICATIONS 3. SPECIFICATIONS 3.1 RF Data RF Unit Type Antenna Type Operating Frequencies Receiver Sensitivity Transmitter Power Range
(open field) RF Device ID Coding Integrated RF transceiver (two-way) shielded super heterodyne, fixed frequency Printed PCB type antenna 433.92 MHz G series 868.35 MHz H series Up to -68 dBm Up to +10 dBm, less based on country requirements Up to 250 m in open space for detectors, and 110 m for hand-held remote controls three-bytes non-replicated per sensor type, or multiples of 16 million possible codes, make it almost impossible to have two like coded transmitters The HomeLogiXTM system has optimum range if installed according to the manufacturers recommendations, though this range may be affected by radio noise from high-power nearby sources, or interference with the signal (blocking) by large metal surfaces, or multiple concrete walls. 3.2 Environmental Data Operation temperature: 0 60 C (32 F - 140 F) Storage temperature: -25 70 C (-13 F - 158 F) Relative humidity: 85% at 30 C Non condensing Dimensions: 220mm (L) x 140mm (W) x 48mm (D) (8.7"(L) x 5.5" (W) x 1.9" (D)) Weight: 595gr. (1.3lbs.) 3.3 Electrical Data Display: 2 Lines of 16 characters, backlit LCD Two fully programmable PGM open collector outputs, 200mA, PTC protected External Siren output of 1A relay Case tamper protection On-board, supervised wired zone and wired tamper inputs Local, 87dbA siren External power supply: 220VAC / 50Hz, 110VAC / 60Hz (15VDC, 800mA) Current consumption: 250mA (standby), 500mA (max) Auxiliary power output: 12VDC, 500mA max Internal backup battery: 800mAh for 2 hours standby, 2 hours full alarm HomeLogiX Installer Manual Page 10 SPECIFICATIONS 3.4 Communication Frequencies: 433.92MHz (G version) and 868.35MHz (H version) RF Jamming detection (UL / EN selectable) Proprietary anti-collision RF protocol Programmable no-activity timer 1-30 minutes, per zone Two Central station numbers and accounts, backup and secondary modes Reporting protocols: Contact ID Three Private telephone numbers for voice reporting, and two way voice communications Local connection (with MD-62) port for local upload/download, and remote programming by PC software Built-in telephone dialer and 300 Baud modem Page 11 HomeLogiX Installer Manual USER MENU STRUCTURE 4. USER MENU STRUCTURE The user menu enables basic user settings such as setting the date and time, and changing user codes. Up to twenty users can access most of the user menu settings, each with their own code, including one master user who has access to all the settings. Settings marked with an (M) can be accessed by the master user only, and appear only if the master code was entered. Note:
If the master code has not been specified, and the installer has set the zone bypass to Off, the user menu is unavailable to regular users To enter the user menu:
1. Press Menu until the screen displays User. 2. Press Enter. 3. Enter the master user code, the default code is 1234. The user menu options are displayed, as follows:
Select
(M) Edit Master Code
(M) User Codes
(M) Set Date &
Time
(M) Date & Time Format Zone Bypass
(M) Private Numbers To Change the master code Specify user codes 2 through 20. If the user code exists, you can edit the code or delete the code. Set the time, as specified in Date & Time Format. (Menu button specifies the AM/PM format.) Set the date, as specified in Date & Time Format. Specify the format in which the date is specified: 24 hour format or AM/PM. Specify the format in which the date is specified: DD-MM-YY or MM-
DD-YY This option is enabled if manual bypass has not been set to Off by the Installer. It enables you bypass/un-bypass a selected zone. Specify up to three private telephone numbers. HomeLogiX Installer Manual Page 12 INSTALLATION INSTALLATION 5. 5.1 Unpacking the Equipment The contents of your package are listed below. First, make sure that all the items in the kit have been included. If you find that any item is missing, contact your dealer immediately. 5.1.1. HomeLogiXTM Package Content HomeLogiXTM unit Transformer Telephone cable Backup battery Button pack (provided separately) Installation screw set 5.2 Supply Power to the Unit It is easier to enroll the ID codes of the transmitting devices to the system before installation. Power the HomeLogiXTM system using the external power transformer or from the backup battery. 5.3 Planning & Programming Register the location of each detector in the tables provided in Appendix A and B. Mark the transmitters and detectors accordingly. To Program the system, refer to PROGRAMMING on page 19. To mount the HomeLogiXTM unit, refer to Mounting the Back-plate on page 16. 5.4 Wiring the System The HomeLogiXTM wiring plan is shown below. Release each screw terminal block and connect accordingly. 6-lead RJ-11 cords are required for the telephone line or telephone line and telephone set. 5.4.1. Wiring the HomeLogiXTM AWAITING NEW DRAWING FROM ALEX Figure 3: Panel Wiring Description Relay output for external siren or strobe. Normally open or normally closed for external siren contacts. Programmable AUX outputs 1 and 2, 200 mA Sink Current 12VDC HomeLogiX Installer Manual Input Siren AUX 1 AUX 2 Page 13 INSTALLATION GND ZONE GND TAMPER
+15VDC VIN GND
+13.8VDC (-) AUX
(OUT) LINE IN HOME TEL Connection Socket
+BAT-
open collector outputs Active Low. Ground Wired Zone (zone 40) Alarm input. Ground Wired Zone (zone 40) Tamper input. Input voltage from AC/DC adaptor VIN=13.8-15 . Auxiliary Power output (to power external devices) +13.8 VDC 500mA Load current Max. Current limited. Telephone line in (from the wall to the system). Telephone line out (from system to telephone device). Connection Socket for 10 pin plug connecting panel to PC with MD-62. Battery 5.4.2. SIREN RELAY OUTPUT Wiring to External Siren Relay output for external siren can be programmed as normally open or normally closed (fail-safe) operation. Inside HomeLogiXTM Figure 4: Siren This output can be programmed by the installer to provide normally closed or normally open dry contact output. This relay output will toggle the normal position in case of an alarm and operates in the same method as the local siren. 5.4.3. Wiring Auxiliary Outputs 1 and 2 Auxiliary outputs 1 and 2: This pair of outputs are open collectors with sink current limited at 200 mA. The outputs work by connecting an external device to power supply through an internal transistor in order to turn it on. HomeLogiX Installer Manual Figure 5: AUX Page 14 INSTALLATION Both Aux 1 and Aux 2 have the same selection of programming. When programming the Aux 1 and Aux 2 open collector outputs, it is possible to select from several operational modes from the programming menu as described in the programming section under Automation sub section Set Triggers on page 35. 5.4.4. Wiring the ZONE 1 Wired Input:
Wired input zone 40 for wired door detector. Tamper GND Figure 6: Zone This wired input acts as a regular sensor and functions likewise in armed and disarmed mode. 5.4.5. Wiring the Wired Tamper Input Wired tamper input: 24-hour active on zone 40. Tamper GND 5.4.6. Wiring the HomeLogiXTM Telephone connectors Figure 7: Tamper Terminal Blocks for Line-In and Tel Line-Out Figure 8: Telephone Page 15 HomeLogiX Installer Manual INSTALLATION 5.5 Connect the AC Transformer Note:
Complete all the wiring and programming before plugging the transformer in the AC outlet Attach the transformer and power up the system. The display shows the HomeLogiXTM logo and the current version. Plug in the transformer the power LED on the control panel should light up. 5.6 Connecting to a Computer The control panel can be equipped with an optional MD-62 adaptor for serial data interchange with a computer. 5.7 Mounting the Back-plate 5.7.1. General There are two options on how to prepare the mounting location; in order to complete the installation without exposed wires, all the wiring should be done through the wall. The wiring to the back-plate can be done without having exposed wires, by installing the panel on a standard electrical box, or making a hole in the wall for the wiring. HomeLogiX Installer Manual Page 16 INSTALLATION When drilling the hole for the wires, it is recommended to drill the hole in the marked out area. Figure 9: Back Plate Note:
It is important to mount the back-plate first before connecting any of the wiring to the unit 5.7.2. Required Space The required space on the wall for the panel is (L) x (H). Hole size for wires: 2cm x 5cm. This is to be drilled according to the openings on the back-plate. The optimum viewing angle of the LCD is achieved when the panel is mounted above the eyelevel of the user. Place panel above eye level for best viewing angle Eye level Page 17 Figure 10: Mounting HomeLogiX Installer Manual INSTALLATION 5.8 Dismounting the Control Panel Release HomeLogiXTM from the mounted back-plate by unlocking the locking hooks on the top of the back-plate by lifting them up and out of the recesses on top of the panel. Pull the top of the panel away from the wall to disconnect the connector to the back plate, and then remove the panel from the lower posts of the back-plate. 5.9 Replacing the Backup Battery To replace the backup battery:
Dismount the panel. Remove the battery cover Replace the battery Replace the cover Panel
Battery Connections Removable Battery Door Figure 11: Backup Battery HomeLogiX Installer Manual Page 18 PROGRAMMING HOMELOGIXTM 6. PROGRAMMING HOMELOGIXTM 6.1 Overview We recommend that you program HomeLogiXTM before installing it. You can use the backup battery or the AC power supply for operating power while programming. Access the HomeLogiXTM installers menu by entering the default 4-digit installers code: 8888. HomeLogiXTM is provided with two default codes:
Default installer code: 8888 which enables you to program HomeLogiXTM Default Master code: 1234 which enables you to change the master code and modify the User and Master options We recommend that you change the master and installer codes after first time use. 6.2 Enrolling Wireless Devices and Remote Controls You can enroll detectors, remote controls, keypads, sirens and repeaters. Note:
Enrolling is not available for Wired Zone #40. It can only be enabled or disabled (Default: disabled). Zone 40 uses the wired zone and tamper inputs Before enrolling wireless devices and remote controls, make sure they all contain the appropriate batteries. Page 19 HomeLogiX Installer Manual INSTALLERS MENU 7. The Installers menu enables access to the following group of options:
INSTALLERS MENU Change code Zones Enrolling Security Communications Automation Messages Maintenance 7.1 Accessing the Installer Menu Press the Menu button twice to reach the INSTALLER MENU option and press Enter. Note:
The default password for entering the Installer menu is 8888. If a wrong code was entered, the system will emit a long beep indicating an error and waits once again for the correct code to be entered, after 30 seconds the system to return to normal mode. No activity for 4 minutes will cause the system to return to normal mode, to return to the normal mode before the 4 minutes are up press the Quick button. Once in the INSTALLER MENU use the Menu button to browse the sub menus. Press Enter to access the desired sub menu as detailed below. 7.2 Change Code CHANGE CODE This option enables you to change the code with which you enter the system. The default code is 8888. To change the installer code:
The first sub menu is CHANGE CODE. Press the Enter button to access the sub menu, type a new four-digit installer code and press Enter to save your new code. Zones Enrolling Security Communications Automation Messages Maintenance HomeLogiX Installer Manual Page 20 INSTALLERS MENU ZONES 7.3 Zones Change Code Zone #01-40 Zone Type Description Chime No activity Enrolling Security Communications Automation Messages Maintenance This menu allows you to define each of the 40 available zones. You can define the zone type, description, activity type and its audible chime indication. To specify zones:
The second sub menu is ZONES. Select the required zone by either browsing all 40 using the Menu button or by entering the zone number using the numeric keypad. Once in the desired zone, use the Menu button to browse the options, press Enter to access the desired sub menu in order to define several characteristics as follows:
Zone Type; select one of the following:
Interior o o Perimeter o Delay o Fire o 24 Hour Silent o 24 Hour Audible o Chime Description; select one of 39 fixed descriptions or one of five editable custom descriptions. HomeLogiXTM enables you to specify five custom zones, see Using the Menu button, Enable or Disable the option and press Enter to confirm your selection. Custom menu on page 36, use the tables in SENSOR PLACEMENT and HELPFUL REFERENCE TABLES on page 45 Chime; select one of three chimes, or no chime. By default zone is no chime No Activity Time; select Enabled or Disabled, By default the option is disabled Page 21 HomeLogiX Installer Manual INSTALLERS MENU 7.4 Enrolling Change Code Zones ENROLLING Security Communications Automation Messages Maintenance Detectors Remote controls R. Sirens Keypads Repeaters The Third sub menu is ENROLLING. Browse the desired application listed below using the Menu button and access it by pressing the Enter button:
Detectors Remote controls Sirens Keypads Repeaters 7.4.1. Detectors You can enroll up to 39 detectors, one detector per zone, numbered 01 through 39. Zone no. 40, which is dedicated to a hardwire detector can only be enabled or disabled under this sub-menu, by default this zone is disabled. To enroll/delete a detector:
Select the desired zone by either browsing all 39 zones using the Menu button or by entering the zone number using the numeric keypad. If no detector is associated to the selected zone, for 30 seconds the screen will show a message saying waiting for detector signal initiate a transmission from the detector
(Alarm, Tamper, or any other transmission available, see the detectors manual for reference). When the transmission is detected you will be asked to press the Enter button to store the detector into the zone. Note:
When enrolling smoke and heat detectors, select the zone type fire. If no signal is received with the allocated 30 seconds the unit will return to normal mode. If the selected zone has a detector associated, you will be asked whether you wish to delete it. Press Enter to delete the detector or the Quick (ESC) button to go back. HomeLogiX Installer Manual Page 22 INSTALLERS MENU 7.4.2. Remote Controls You can enroll up to eight remote controls, and specify functions for each button on the remote control. You can also delete enrolled remote controls. To enroll a remote control and specify a function:
Select the desired remote control number 01-08 by either browsing the remotes using the Menu button or by entering the remote number using the numeric keypad. Enroll the remote control when the WAITING FOR SIGNAL message is displayed, by pressing a button on the remote you wish to enroll, When the signal is detected you will be asked to press the Enter button to store and save your selection. Once the selection is stored, you can then choose to configure each of the remote control buttons to behave in one of the following options:
Restore Default (will set the button to its original functionality) Operate PGM 1 Operate PGM 2 Status Request At any time press the Quick (ESC) button to exit the menu, Once you exited the menu
(after saving the enrollment) you cannot change the buttons behavior, unless you delete the remote and re-enroll it. To delete a remote control Select the pre-enrolled remote control number 01-08 by either browsing the remotes using the Menu button or by entering the remote number using the numeric keypad. You will be asked whether you wish to delete it. Press Enter to delete the detector or the Quick (ESC) button to go back. 7.4.3. RF Siren You can enroll up to four RF Sirens. You can choose to remove enrolled sirens. To enroll/remove an RF Siren:
Select the required Siren location, #01-04 by either browsing the keys using the Menu button or by entering the sirens number using the numeric keypad Enroll the RF Siren when the WAITING FOR SIGNAL option is displayed, by activating the sirens tamper, When the signal is detected you will be asked to press the Enter button to store and save your selection If the selected location has a siren enrolled, you will be asked whether you wish to delete it. Press the Enter button to delete or the Quick (ESC) button to go back Page 23 HomeLogiX Installer Manual INSTALLERS MENU 7.4.4. Keypads You can enroll up to four keypads. You can choose to remove enrolled keypads. To enroll/remove a keypad:
Select the required keypad location, #01-04 by either browsing the keys using the Menu button or by entering the keypads number using the numeric keypad Enroll the keypad when the WAITING FOR SIGNAL option is displayed, When a signal is detected you will be asked to press the Enter button to store and save your selection If the selected location has a keypad enrolled, you will be asked whether you wish to delete it. Press the Enter button to delete or the Quick (ESC) button to go back 7.4.5. Repeaters You can enroll up to four repeaters. You can choose to remove enrolled repeaters. To enroll/remove a repeater:
Select the required repeater location, #01-04 by either browsing the keys using the Menu button or by entering the repeaters number using the numeric keypad Enroll the repeater when the WAIT FOR SIGNAL option is displayed, by activating the tamper, When the signal is detected you will be asked to press the Enter button to store and save your selection If the selected location has a repeater enrolled, you will be asked whether you wish to delete it. Press the Enter button to delete or the Quick (ESC) button to go back 7.5 Security The following is a list of the various security features of the system. Change Code Zones Enrolling SECURITY Communications Automation Messages Maintenance HomeLogiX Installer Manual Page 24 INSTALLERS MENU Exit Delay Entry Delay Auto Arming Siren Time Siren Mode Relay Polarity Local Siren Supervision Time Jamming No Activity Time Trouble Beeps Bypass Option Quick Arm Panic Button Duress Code Alarm Cancel Alarm Abort Time Backlight Time Hide Display Key Beeps The fourth sub menu is SECURITY. Browse the desired security related setting, as described in detail ahead, using the Menu button, press the Enter button to access it. 7.5.1. Exit Delay An exit delay enables the user to arm the system, and exit the site through a specified door, after arming the system, without setting off an alarm. Slow-rate warning beeps sound when the system is armed, the beeping rate increases during the last ten seconds of the delay. The exit delay is set at 30 seconds by default. To specify the exit delay:
Using the numeric keypad, specify the length of time for the exit delay between 1 and 99 seconds and press Enter to save your selection. 7.5.2. Entry Delay An entry delay enables the user to enter the site through a specified door without setting off an alarm. The entry delay is set at 30 seconds by default. After entry, the user must disarm the system before the entry delay expires. Slow-rate warning beeps sound upon detection of the specified zone/s, the beeping rate increases during the last ten seconds of the delay. Page 25 HomeLogiX Installer Manual INSTALLERS MENU To modify the entry delay:
Using the numeric keypad, specify the length of the entry delay between 1 and 99 seconds and press Enter to save your selection. 7.5.3. Auto Arming Auto Arming allows scheduled arming and disarming of the system for all weekdays at different hours. To activate auto arm:
Using the Menu button, select the day of the week and press Enter to confirm. Using the Menu button, select one of the following options and press Enter to confirm:
Disabled Arm Home Arm Away Enter a time (24 hour time convention) to arm the system using the numeric keys and press Enter to confirm the time, repeat the process for the disarm time. 7.5.4. Siren Time Specifies the amount of time the siren will sound when an alarm has been set off. The siren time is set to three minutes by default. This relates to all siren types, wired, wireless and local. To specify the siren time:
Using the numeric keypad, specify the length of the siren time between 00 and 99 minutes (00 disables the siren) and press Enter to save your selection. 7.5.5. Siren Mode You can specify whether you want the siren to be activated on Away only or both away and home alarms, the siren mode is set at Away + Home by default. This relates to all siren types, wired, wireless and local. To specify the siren mode:
Using the Menu button, select one of the following options and press Enter to confirm:
Away Away + Home 7.5.6. Relay Polarity Depending on the input trigger of the hardwired siren you are using specify the relay polarity to either Normally Open or Normally Closed. The siren relay polarity is set to N.O. (normally open) by default. HomeLogiX Installer Manual Page 26 INSTALLERS MENU To set the relay polarity:
Using the Menu button, select one of the two options, N.O. or N.C., and press Enter to confirm. 7.5.7. Local Siren Specifies whether an activated alarm causes an internal siren (emitted from the systems speaker) to sound or remain silent. The local siren is enabled by default. To set up a local siren:
Using the Menu button, select one of the two options, Enable or Disable, and press Enter to confirm. 7.5.8. Supervision Time Specifies the time limit during which the system receives supervision reports from specified wireless devices. If a device does not report-in at least once within the specified time limit, the system initiates an inactivity alert. Default is set to one hour. To specify the supervision time:
Using the Menu button, select on of the time limit options, 1, 2, 4, 6, 8, 16, 24 or 48 hours, during which the system receives reports and press Enter to confirm. 7.5.9. Jamming Specifies whether the system detects and reports jamming interferences on the radio channel used by the system. The jamming detection is disabled by default. To specify jamming detection:
Using the Menu button, select one of the following options and press Enter to confirm:
Disabled: to disable jamming detection EN enabled: to enable European standard jamming detection UL enabled: to enable US standard jamming detection 7.5.10. No Activity Time Specifies the time limit in which the system should receive a signal from a sensor used to monitor the activity of sick, elderly or disabled people. If no device detects and reports movement at least once within the specified time limit, a not active alert sounds. This option is disabled by default. To set the no activity time:
Using the Menu button, select one of the following options and press Enter to confirm:
1, 2, 5, 10, 15, or 30 minutes Disable the timer Page 27 HomeLogiX Installer Manual INSTALLERS MENU Note:
Required zones should be set to Enabled for this security feature to work 7.5.11. Trouble Beeps Determine whether the system will emit a trouble beep indicated by a series of four short beeps once a minute for the following Trouble events:
Low battery (detectors and system) Supervision loss (detectors) Power failure (system) Communication failure (system) Tamper(system and zones) RF jamming The default is set to Enabled To specify trouble beeps:
Using the Menu button, choose to Enable or Disable the trouble beeps and press Enter to confirm 7.5.12. Bypass Specifies either manual bypassing of individual zones, or enables the system to forcedly arm open zones when armed. Bypass is turned off by default. To set bypass:
Using the Menu button, select one of the following options and press Enter to confirm:
Off to set the bypass off Off Force/Manual to set the manual bypass Manual/Force to set the forced arming (automatic bypass) 7.5.13. Quick Arm Enables the user to arm the system without entering a code; Quick Arm is set to disable by default. To enable/disable quick arm without a code:
Using the Menu button, select one of the following options and press Enter to confirm:
Enter Installer menu/Security/Quick Arm/Enable Enter Installer menu/Security/Quick Arm/Disable To utilize quick arm:
Give a long press on the ESC key. The panel is armed AWAY or HOME. HomeLogiX Installer Manual Page 28 INSTALLERS MENU 7.5.14. Panic Button Enables the user to generate an alarm (audible or silent) by pressing the emergency button on the control panel, the remote control panic button will remain active at all times if enrolled. The local emergency button is disabled by default. To set a panic button:
Using the Menu button, select one of the following options and press Enter to confirm:
Audible: to set an audible panic alarm that transmits a message to the CMS or private telephone set. Silent: to set a silent panic alarm that transmits a message to the CMS or private telephone set, but without a siren Disabled: to disable the panic alarm button all together 7.5.15. Duress Code The system allows you to define a duress code, which a user can enter when forced to disarm the system under duress. By default, the duress code option is disabled, and there is no duress code set. Note:
The duress code should NOT be identical to any other existing code. To change the duress code:
Type a new four-digit duress code using the numeric keypad and press Enter to save your new code. To disable the duress code:
Press the pound key (#), the code will disappear, and the duress code option will be disabled, press Enter to save. 7.5.16. Alarm Cancel Specifies the amount of time during which if the user disarms the alarm, the system sends a Cancel Alarm message to the central station. By default, The Alarm Cancel is set to 00 minutes (disabled). To set the Alarm Cancel:
Using the numeric keypad, set the alarm cancel time between 01 60 minutes, or set it to 00 to disable the option. 7.5.17. Alarm Abort Time The system will sound a warning, but the central station will not receive notification of the alarm if the user disarms the system within the specified alarm abort time. This function applies to interior and/or perimeter zones only. The Alarm Abort Time is set to 00 minutes (disabled). Page 29 HomeLogiX Installer Manual INSTALLERS MENU To set the alarm abort time:
Using the numeric keypad, set the alarm abort time between 01 60 seconds, or set it to 00 to disable the option. 7.5.18. Backlight Time Specifies the backlight options; by default, the backlight time is set at 15 seconds. To set the backlight:
Using the Menu button, select one of the following options and press Enter to confirm:
Always: to specify that the keypad and buttons are backlit at all times. 15 secs: to specify that the keypad and buttons are backlit for up to 15 seconds after last key press. 7.5.19. Hide Display Enables you to specify that when armed, the system will not display the system statuses or other system prompts; by default, Hide Display is off. To display the system status:
Using the Menu button, select one of the following options and press Enter to confirm:
Off to display status and prompts. On to hide status and prompts. 7.5.20. Key Beeps Choose to turn Key beeps on to hear a beep on each key press; by default, the Key beeps is off. To set the key beeps:
Using the Menu button, select one of the following options and press Enter to confirm:
On to turn the key beeps on Off to turn the key beeps off HomeLogiX Installer Manual Page 30 Zones Enrolling Security COMMUNICATIONS Automation Messages Maintenance INSTALLERS MENU 7.6 Communications Change Code System Telephone Private Report CS Report Setup Line Test AC Fail Report 2WV SETUP Fax Defeat Number of Rings The fifth sub menu is Communication, which deals with the setup of system communications parameters and settings with the outside world. Browse the desired communication related setting, as described in detail ahead, using the Menu button, press the Enter button to access it. 7.6.1. System Telephone This menu allows you to specify the telephone number used for the ring back option when calling the system telephone. To set up the system telephone:
Using the numeric keypad, enter the system telephone number and press Enter to confirm. Press the pound key (#) to delete an existing number. Note:
When setting up the system telephone, use a comma (,) to indicate a delay when dialing a number. 7.6.2. Private Report This menu enables you to set the private telephone report options as detailed below. To set up private report:
Using the Menu button, select from the following options and press Enter to confirm:
Set Numbers, specifies the telephone numbers of the subscribers to which the system reports. You can enter up to three numbers. Using the Menu button, choose between number 1, 2 or 3 and press Enter. Using the numeric keypad, enter the telephone number and press Enter to confirm. Press the pound key (#) to delete an existing number. Note:
When setting up the system telephone, use a comma (,) to indicate a delay when dialing a number. HomeLogiX Installer Manual Page 31 INSTALLERS MENU Report Options specifies the event groups that are included in a report. Using the Menu button, Enable or Disable a group, as required and press Enter to confirm:
o Alarms (enabled by default) o Troubles (enabled by default) o Alerts o Bypass o Arm/disarm o Restore Dialing Attempts specifies the number of times the system attempts to dial a private number before dialing the next specified private number. Using the Menu button, specify between 1, 2, 3, 4, or 5 dialing attempts press Enter to save. The default is 3 attempts. 7.6.3. CS Report Setup This menu enables you to set up the Central Station (CS) report options:
To set up CS report:
Follow these steps:
CS Report method specifies the reporting method. Using the Menu button, select one of the following and press Enter to confirm:
o Primary Only(default) o Alternate o Secondary o Both o Disable CS Primary specifies the first telephone number of the first central station to which the system reports in case of an event, and the primary account code the number that identifies your system to the central station. The events reported are the events specified during setup. Follow these steps:
Note:
For PABX use the digit followed by "*" and then the full number o Phone Number, Using the numeric keypad, enter the CS telephone number, press Enter to save, Press the pound key (#) to delete an existing number o Account Code, Using the numeric keypad, enter a code of four digits and press Enter to confirm o Report Options specifies the event groups which are included in a report. Using the Menu button, Enable or Disable a group, as required and press Enter to confirm:
Alarms (enabled by default) HomeLogiX Installer Manual Page 32 INSTALLERS MENU
Troubles (enabled by default)
Alerts
Bypass
Arm/disarm
Restore CS Secondary specifies the secondary telephone number dialed and the secondary account code the number that identifies your system to the second central station. The events reported are the events specified during setup. Follow the instructions in CS Primary Protocol, specifies the reporting protocol used by the system to report events to the central stations. Currently only Contact ID is available. Dialing Attempts specifies the number of times the system attempt to dial the primary stations number before attempting to dial the secondary number. Using the numeric keypad select 1 to 16 attempts, press Enter to save. The system is set to 3 attempts by default. 7.6.4. Line Test Enables you to specify the time when the telephone line and CS reporting is tested and reported to the central station, as well as the number of days between each test
(CS periodical reporting). To set up line test:
Using the Menu button, select between the two options, and press Enter to confirm:
Repeats, specifies the number of days between tests. Using the numeric keypad, choose 1 to 30 days press Enter to save; default is 7. Test Time Using the numeric keypad, specifies the time of day (24-hour day convention) to perform the test by typing the four digits of the desired hour, press Enter to save. The test time is set at 12:00 by default. 7.6.5. AC Fail Report This option allows you to specify a delay time, before reporting the power failure to the CS, in which time power may be restored. The time is set to 0 (disabled) by default. To set up AC fail report:
Using the numeric keypad, set the time between 1 240 minutes, or set it to 0 to disable the option, press Enter to save. 7.6.6. 2-Way Voice Behavior The HomeLogix panel enables the CMS operator to open a 2-Way Voice session with the panel. The only events used in 2-way voice are: TAMPER, EMERGENCY, and ALARM/RESTORE. In general, 2-Way Voice Behavior option is achieved via simplex telephone communication. The CMS operator can listen, talk, or close communication by Page 33 HomeLogiX Installer Manual INSTALLERS MENU selecting #1 (Listen), #3 (Talk), or #9 (Close communication) in the event the system calls when an alarm is sounded. The installer can set the following options:
CMS 2-way voice Enable/Disable CMS 2-way voice Timeout However, if the KEY ON, TROUBLE, BYPASS, and MISC events are reported, and the CMS is in LISTEN-IN mode, the CMS receptionist can hear the alarm/emergency voice message events, if they belong to the same CMS. On the other hand, if those events belong to another CMS, they will be reported after the current CMS session report has finished. To set up 2 way Voice Behavior:
1. In the 2WV SETUP menu, select CS 2WV ENABLE. 2. Select ENABLE. 3. Select CS 2WV TIMEOUT. 4. Enter a timeout value that does not exceed 180 seconds. Note:
It is recommended to use 180 seconds for Timeout. 5. Press Exit to return to Normal mode. 7.6.7. Fax Defeat When calling the system, fax and answering machines may need to be overridden. This menu specifies whether to enable or disable this override. By default, this option is disabled. To set up Fax Defeat:
Using the Menu button, Enable or Disable the option and press Enter to confirm. 7.6.8. Number of Rings Specify the number of rings before the system answers the line. By default, this option is set to 4 rings. To specify the number of rings:
Using the numeric keypad, set the number of rings to between 1 and 15, and press Enter to confirm. 7.6.9. Select Region Select the region in which the time is set for the system. By default, this option is set to 4 rings. By default, this option is Other. To select the region:
Select the region from the drop down menu (or leave the default of Other), and press Enter to confirm. HomeLogiX Installer Manual Page 34 INSTALLERS MENU Keypad Manual Set Triggers Zones Enrolling Security Communications AUTOMATION Messages Maintenance 7.7 Automation Change Code The sixth sub menu is Automation, which deals with the setup of various home automation options. Browse the desired automation related setting, as described in detail ahead, using the Menu button, press the Enter button to access it. 7.7.1. Keypad Manual Enable or disable this option to determine whether the PGM output can be controlled by numeric keys 1 and 2 of the keypad as described in the Keypad Operated Functions section above, this option is enabled by default. To set up the keypad:
Using the Menu button, Enable or Disable the option and press Enter to confirm your selection. 7.7.2. Set Triggers Enables you to activate the PGMs, using various events in an automated fashion. By default, no triggers are set. To set up triggers:
Using the Menu button, select PGM1 or PGM2, and press Enter to confirm. For each of the PGMs you can select the pulse time and triggers as described below:
Pulse time - set the length of time for the device to stay on when a pulse type activation is selected. Using the numeric keypad, set the time from 1 to 99 seconds and press Enter to save. Select the trigger type and parameters according to the following options:
PGM Activation Options On, Off, Pulse, Ignore On, Off, Pulse, Ignore On, Off, Pulse, Ignore Enabled, Disabled Pulse, Ignore Pulse, Ignore Enabled, Disabled Trigger Arm Away Arm Home Disarm Alarm Panic Trouble AC Loss Remote Control On, Off, Pulse, Trouble, Ignore Relates to remotes panic button Zone On, Off, Pulse, Trouble, Ignore Relates to zone open or detection Remarks Go OFF when alarm stops ON when AC fails, OFF when AC returns Page 35 HomeLogiX Installer Manual INSTALLERS MENU Keypad Mute House Name Custom Zones Zones Enrolling Security Communications Automation MESSAGES Maintenance 7.8 Messages Change Code The seventh sub menu is Messages, which deals with custom text and voice zone descriptions, Personal messages between users and message mute options. Browse the desired setting, as described in detail ahead, using the Menu button, press the Enter button to access it. 7.8.1. Keypad Mute This option allows you to enable or disable the option to mute all the voice messages and beeps (except for trouble beeps) by numeric key 5 of the keypad as described in the Keypad Operated Functions section above. By default, this option is Disabled. To set up keypad mute:
Using the Menu button, Enable or Disable the option and press Enter to confirm your selection. 7.8.2. House Name Enables you to record and listen to the House Name of the system. To record a House Name message:
1. In the Installer Menu, select Messages. 2. Page till you get to House Name menu. 3. In the House Name menu, select ENTER TO RECORD. 4. Press Enter to start and stop recording. 5. Press ENTER TO LISTEN after a recording has been entered. 7.8.3. Custom Zones Enables you to record and listen to five voice and text custom zones descriptions and to toggle between them. On each zone, the user can simply edit the text by typing the keypad buttons, the text is limited to 16 characters. To record a Custom Zone message:
1. In the Custom Zone menu, select a Custom Zone. 2. Press ENTER TO RECORD. 3. Press Enter to record the next zone. 4. Repeat 5 times. HomeLogiX Installer Manual Page 36 INSTALLERS MENU 5. Press ENTER TO LISTEN. This appears after the string of recordings have been entered. 6. Press Enter to stop the listening to one zone and move to the next zone. This option is circular. Note:
Reset to factory settings does not delete these recordings. Zones Enrolling Security Communications Automation Messages MAINTENANCE Factory Default RF Test Test Indicators Test Sirens Test Devices 7.9 Maintenance Change Code The eighth sub menu is Maintenance, which describes the various system maintenance options. Browse the desired security related setting, as described in detail ahead, using the Menu button, press the Enter button to access it. 7.9.1. Factory Defaults This option allows you to restore the default factory settings for the system. To restore factory default:
Press the Enter button to confirm. 7.9.2. RF Test RF testing checks the signal strength of all the wireless devices enrolled to the system. If a weak signal is detected, a repeater may be used to improve the link quality. The system saves the most recent set of RF test results for uploading. The system clears the tests when running another RF test. To perform the test:
Using the Menu button select the test you wish to perform, press the Enter button to access the test. Activate the RF unit to send a signal to the unit. The results can be Strong, Normal or Low. The available tests are:
Test Detectors Test R. Controls Test R. Siren Test Keypads Page 37 HomeLogiX Installer Manual INSTALLERS MENU Test Repeaters To view the results:
For each of the tests, you can review the results by pressing the Enter button and then either the Menu button or the alphanumeric keys review all the units. To exit the RF test mode you must press the Quick (ESC) button 7.9.3. Test Indicators The indicators test checks the two indicator LEDs, power and status located on the Panel. To test the indicators:
After entering this menu press Enter the LEDs will blink three times 7.9.4. Sirens test This test checks the different available sirens by activating them. To test the sirens:
1. Select the siren you wish to test:
Local Siren External siren RF siren o Siren 1 o Siren 2 o Siren 3 o Siren 4 2. Press Enter to activate the sounder. 3. Press ESC to stop the siren. 7.9.5. Test Devices This test checks the PGMs connected to the system. To test the PGM devices:
1. Select the PGM you wish to test:
PGM 1 PGM 2 2. Press Enter to activate the PGM for three seconds. HomeLogiX Installer Manual Page 38 READING THE EVENT LOG 8. READING THE EVENT LOG The HomeLogiXTM event log stores up to 128 events. When the log is full, the new incoming event replaces the oldest event. Events are displayed in a chronological order, and include the date and time of their occurrence. To Access the Event Log:
Access the event log by pressing 8 on the keypad when the system is in normal mode. To read an event, enter the master code and press Enter. Browse the even log using the Menu button, press Enter to view the date and time of the occurrence. Note:
When accessing the Event Log via the PC software the words Remote Control 8 are displayed. Page 39 HomeLogiX Installer Manual ACCESSORIES Annex I. ACCESSORIES I.1 HomeLogiXTM Compatible Detectors A wide assortment of wireless detectors is compatible with the HomeLogiXTM control panel, primarily for use in intrusion and personal safety applications. There are also other system components, such as RF repeaters for extending range, and wireless sirens for remote annunciation of alarms. To cover all the possible solutions of integration, a Universal RF Transmitter is available, which can interface with almost any type of wired sensor and enable it to communicate to the HomeLogiXTM by radio link. Note:
For the model numbers shown below, XX denotes a variation on frequency and country of application. Each detector comes with its own installation manual. All the wireless detectors are powered by high-capacity lithium primary cells, which provide long battery life. The control panel identifies the detectors by means of a unique three-byte identification code (ID Code), which offers up to 16 million possible combinations. The ID is transmitted with every radio message. In addition to the ID, each detector provides local intelligence of events such as the following, by radio link to the panel:
Tamper open and restore events;
Alarm events;
Low battery and restore events. Each detector also generates a supervisory full status transmission every 20 minutes. I.1.1. Wireless Passive Infra-Red (Motion) Detector This sensor (Figure 1) is used to secure volumetric indoor areas. It employs a precision-
optics patented Fresnel lens, an ultra-sensitive infrared silicon sensor, and advanced microcontroller digital signal analysis. The sensor is housed in tamper-detection housing. The sensor can be mounted to any rigid flat or corner surface to cover the desired volumetric space to be protected; a corner mount is available to enable corner tamper detection. When motion is detected, the PIR transmits a message to the control panel. If the control panel is armed, then the system will generate an alarm. Figure 12 SA-01 Wireless PIR Motion Detector I.1.2. Advanced Wireless Spherical PIR (Motion) Detector This sensor (Figure 2) is used to secure volumetric indoor areas. It employs a unique Spherical Fresnel lens with creep-zone and an optional snap-in curtain mask, an ultra-
sensitive infrared silicon sensor, and advanced microcontroller digital signal analysis. HomeLogiX Installer Manual Page 40 ACCESSORIES The sensor is housed in a dual tamper-detection, modernly designed housing. The sensor can be mounted to any rigid flat or corner surface to cover the desired volumetric space to be protected; a corner mount is available to enable corner tamper detection. When motion is detected, the PIR transmits a message to the control panel. If the control panel is armed, then the system will generate an alarm. Figure 13 PYR-2011 Wireless PIR Motion Detector I.1.3. Magnetic Contact Sensor This is a very special transmitter (Figure 3) for protecting windows, doors, closets and drawers with a local magnetic sensor, and terminal blocks for wiring additional wired magnetic sensors in series. A single transmitter can protect more than one door. Figure 14 SA-02 Magnetic Contact Detector I.1.4. Glass Break Detector This special detector (Figure 4) is used to protect windows and glass walls; it is especially suitable for balcony sliding glass windows, gazebo glass areas, and ordinary glass windows. This detector detects an intruder before they actually enterwhen they break the glass. The SA-19 device provides superior audio analysis and false alarm prevention by detecting both the shock wave at low frequencies, and the glass breaking frequencies. Figure 15 SA-19 Wireless Glass Break Detector HomeLogiX Installer Manual Page 41 ACCESSORIES I.1.5. Universal Wire to RF (Two-Channel) Transmitter This special transmitter (Figure 5) was developed for interfacing with advanced sensorssuch as microwave barriers, infrared barriersfence perimeter protection detectors, and other third-party active detectors that produce a normally closed (NC) or normally opened (NO) output. The SA-25 has pulse counting on one of the inputs and can count 3, 6 or 9 pulsesprogrammable in that mode. The SA-25 itself is powered from a battery, though it may also be powered from a dc power supply, saving the battery for backup. This universal detector features a local magnetic contact detector as well, and is supplied with PC utility software to simplify programming. Figure 16 SA-25 Wireless Universal Two Channel Transmitter I.1.6. Smoke and Heat Detectors There are four types of sensors in this category (Figure 6), which are connected to a wireless transmitter base. The family of detectors consists of an Optical Smoke Detector, an Ionization Smoke Detector, a Maximum-Temperature Detector, and a Rate-of- Temperature-Rise Detector. These detectors report status to the control panel, including tamper, low battery, alarms and alarm restore. The battery requires replacement every year. SA-15 SA-14 SA-17 SA-16 Figure 17 Wireless Smoke and Heat Detectors I.2 HomeLogiXTM Compatible Remotes A wide assortment of wireless remote control devices are available for use with the HomeLogiXTM control panel. These are primarily used to set the control panel modes, Page 42 HomeLogiX Installer Manual ACCESSORIES and for personal emergency applications. These transmitters can be enrolled onto the HomeLogiXTM. Note:
For the model numbers shown below, XX identifies a particular frequency and country of application. Each detector is supplied with its own installation manual. All the wireless remote controls are powered with standard available AAA or M2 alkaline primary cells, which have long battery life and are easily replaced. The control panel identifies the detectors by means of a unique three-byte identification code (ID Code), which offers up to 16 million possible combinations. The ID is transmitted with every radio message. In addition to the ID, each detector provides local intelligence by radio link to the panel of events such as:
Away Arming (Full Arming Mode);
Home Arming (Partial Arming Mode);
Disarming (Not Armed Mode);
Personal Panic Emergency. I.2.1. Wireless 3-Button Remote Control Transmitter This hand-held transmitter (Figure 7) comes with a keychain attachment, and is small enough to fit easily into a purse or pocket, to be carried around by the user. Figure 18 SA-03 Wireless 3-Button Keychain Remote Upon arriving at the armed house, the user presses a single button to disarm the house without approaching the panel. Designed for comfortably using the system, the transmitter can also fully arm the panel (Away Arm), or partially arm zones (Home Arm). For emergencies, there is a Panic key, which when pressed for 2 seconds, causes the panel to Alarm, regardless of whether the panel is armed or disarmed. I.2.2. Wireless Emergency Panic Pendant This is a very special transmitter (Figure 8) for emergency use. Because of its small size, it can easily be carried by the user as a pendant. The SA-04 XX features waterproof construction, which means the user can shower or bathe with it and can press the button for 2 seconds to cause an Emergency Alarm at any time, 24 hours a day, in both Armed and Disarmed modes. Note:
This transmitter battery is not installer- replaceable; it can be replaced in the factory. Each SA-04 transmitters battery life is up to 5 years, based on 10 emergency transmissions per year Page 43 Figure 19 Wireless Panic Pendant SA-04 HomeLogiX Installer Manual ACCESSORIES I.2.3. 1, 2 or 4-Button Remote Controls These hand-held transmitters (see Figure 9) come with a belt-clip attachment and a loop-clip attachment, so they can be hung on a wall or carried by the user on the belt, or car visor. The user arrives at the armed house and disarms the house by pressing a single button, without any need to be near the panel. Designed for comfortable use of the system, the transmitter can also fully arm (Away Arm) the panel, or partially arm zones (Home Arm). For emergencies, there is a Panic key, which when pressed for 2 seconds, causes the panel to Alarm, regardless of whether the panel is armed or disarmed. SA-26 SA-27 SA-28 1-button Remote 4-button Remote Figure 20 Wireless Remote Control Transmitters 2-button Remote I.2.4. HomeLogiXTM Compatible Wireless Siren Each HomeLogiXTM Control Panel can enroll and control up to four wireless sirens, which can be installed on the exterior of the house, building or door of the premises. The intrusion sound of the wireless sirens warns off attempting intruders and draws the attention of neighbors, and directs emergency services to the location of the alarm. The wireless sirens act in the same way as the panel alarm settings, with the same siren time. When the panel is in alarm, the remote sirens will sound. For Silent Alarm, the sirens will not sound. When the panel is disarmed, or the siren time expires, the sirens will be remotely switched off by the panel. I.3 Other HomeLogiXTM Accessories Contact your dealer to ask for a current list of any accessories, parts and system components not covered in this Installation Manual. HomeLogiX Installer Manual Page 44 SENSOR PLACEMENT and HELPFUL REFERENCE TABLES Annex II. SENSOR PLACEMENT and HELPFUL REFERENCE TABLES II.1 Default Zone Descriptions Attic Back Door Back Yard Basement Bathroom Bedroom Childs Room Closet Den Dining Room Downstairs Elevator Emergency Fire Front Yard Garage Garage Door Gate Guest Room Guest Bathroom Hall Kitchen Laundry Room Library Living Room Lower Bathroom Main Entrance Master Bathroom Master Bedroom Office Storage Room Store Upper Bathroom Upstairs Vehicle Door Walkway Warehouse Yard Door II.2 Custom Zone Descriptions Custom Zone Custom #1 Custom #2 Custom #3 Custom #4 Custom #5 Description II.3 Detector Deployment Plan Description Zone Type Zone No. 1. 2. 3. 4. 5. 6. Page 45 Chime Yes/No No Activity Zone PGM 1 PGM 2 Remarks HomeLogiX Installer Manual SENSOR PLACEMENT and HELPFUL REFERENCE TABLES Zone No. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. 24. 25. 26. 27. 28. 29. 30. 31. 32. 33. 34. 35. 36. 37. 38. 39. 40. Zone Type Description Chime Yes/No No Activity Zone PGM 1 PGM 2 Remarks HomeLogiX Installer Manual Page 46 SENSOR PLACEMENT and HELPFUL REFERENCE TABLES II.4 Remote Control Normal Operation PGM 1 PGM 2 Status Request No. Holder Name 1. 2. 3. 4. 5. 6. 7. 8. Page 47 HomeLogiX Installer Manual Reporting codesREPORTING CODES Annex III. REPORTING CODES III.1 Reporting codes The Table below provides a listing of the codes used to communicate with the CMS. CID Code Code Index Programmable Feature Description 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F 10 11 12 13 14 15 16 17 18 19 1A 1B 1C 1D 1E 1F 20 21 22 23 24 25 26 27 28 29 2A 2B 2C Burglary Event (Alarm for a zone) Burglary Restore (for a zone) Fire Event (Fire Alarm for a zone or from emergency button) Fire Restore (Fire Alarm for a zone or from emergency button) 24 Hour zone Audible Alarm Event 24 Hour zone Audible Alarm Restore 24 Hour zone Silent Alarm Event 24 Hour zone Silent Alarm Restore Wire Sensor Tamper Event (Zone Tamper Alarm) Wire Sensor Tamper Restore (Zone Tamper Alarm) Wireless Sensor Tamper Event (alarm for RF zone) Wireless Sensor Tamper Restore (for RF zone) RF Low Battery Event (for RF zone) RF Low Battery Restore (for RF zone) Loss of supervision RF Alarm Event (for a zone) Loss of supervision RF Restore (for a zone) Wireless Panic Alarm Event From Remote Control Sensor Trouble Event (No Activity Alarm) Sensor Trouble Restore (No Activity Alarm) Duress Report Event Open Report Event (Disarm) Close Report Event (Arm Away) Partial Close Report Event (Arm Home) Keys-witch O/C (Key-Switch Disarm) Keys-witch O/C (Key-Switch Arm Away) Keys-witch O/C (Key-Switch Arm Home) Cancel Event (Alarm Cancel Report) Silent Panic From Panel Audible Panic From Panel Quick Arm Forced Arm Remote arm/disarm (Disarm) Remote arm/disarm (Arm) RF receiver Jam Detect Event RF receiver Jam Detect Restore Low system battery Event (Panel Low Battery) Low system battery Restore (Panel Low Battery) AC Loss Event (Panel AC Failure) AC Loss Restore (Panel AC Failure) Tamper Event (Panel Tamper) Tamper Restore (Panel Tamper) Failure to communicate Event (Communication Failure) Zone bypass Event Zone bypass Restore E130 R130 E110 R110 E133 R133 E122 R122 E144 R144 E383 R383 E384 R384 E381 R381 E120 E380 R380 R121 E401 R401 E456 R409 E409 E442 E406 E122 E123 E408 E423 R407 E407 E344 R344 E302 R302 E301 R301 E137 R137 E354 E570 R570 HomeLogiX Installer Manual Page 48 Reporting codesREPORTING CODESReporting codes Code Index Programmable Feature Description CID Code 2D
Periodic Test Report Event Listen in Follow -
E602 E606
*This event is not sent by the panel to the dialer. Listen in Follow code is produced by the dialer according to current configuration:
2-way voice enable/disable 2-way voice period, Therefore there is no Index. Page 49 HomeLogiX Installer Manual Limited WarrantyLIMITED WARRANTY Annex IV. LIMITED WARRANTY IV.1 Limited Warranty ROSSLARE ENTERPRISES LIMITED S (Rosslare) TWO YEARS LIMITED WARRANTY is applicable worldwide. This warranty supersedes any other warranty. Rosslare's TWO YEARS LIMITED WARRANTY is subject to the following conditions:
Warranty Warranty of Rosslare's products extends to the original purchaser (Customer) of the Rosslare product and is not transferable. Products Covered By This Warranty and Duration ROSSLARE ENTERPRISES LTD. AND / OR SUBSIDIARIES (ROSSLARE) warrants that the HomeLogiXTM Advanced Wireless Intrusion system panel, to be free from defects in materials and assembly in the course of normal use and service. The warranty period commences with the date of shipment to the original purchaser and extends for a period of 2 years (24 Months). Warranty Remedy Coverage In the event of a breach of warranty, ROSSLARE will credit Customer with the price of the Product paid by Customer, provided that the warranty claim is delivered to ROSSLARE by the Customer during the warranty period in accordance with the terms of this warranty. Unless otherwise requested by ROSSLARE ENTERPRISES LTD. AND / OR SUBSIDIARIES representative, return of the failed product(s) is not immediately required. If ROSSLARE has not contacted the Customer within a sixty (60) day holding period following the delivery of the warranty claim, Customer will not be required to return the failed product(s). All returned Product(s), as may be requested at ROSSLARE ENTERPRISES LTD. AND /OR SUBSIDIARYS sole discretion, shall become the property of ROSSLARE ENTERPRISES LTD. AND
/OR SUBSIDIARIES. To exercise the warranty, the user must contact Rosslare Enterprises Ltd. to obtain an RMA number after which, the product must be returned to the Manufacturer freight prepaid and insured In the event ROSSLARE chooses to perform a product evaluation within the sixty (60) day holding period and no defect is found, a minimum US$ 50.00 or equivalent charge will be applied to each Product for labor required in the evaluation. Rosslare will repair or replace, at its discretion, any product that under normal conditions of use and service proves to be defective in material or workmanship. No charge will be applied for labor or parts with respect to defects covered by this warranty, provided that the work is done by Rosslare or a Rosslare authorized service center. Exclusions and Limitations ROSSLARE shall not be responsible or liable for any damage or loss resulting from the operation or performance of any Product or any systems in which a Product is incorporated. This warranty shall not extend to any ancillary equipment not furnished by ROSSLARE, which is attached to or used in conjunction with a Product, nor to any Product that is used with any ancillary equipment, which is not furnished by ROSSLARE. This warranty does not cover expenses incurred in the transportation, freight cost to the repair center, removal or reinstallation of the product, whether or not proven defective. Specifically excluded from this warranty are any failures resulting from Customer's improper testing, operation, installation, or damage resulting from use of the Product in other than its normal and customary manner, or any maintenance, modification, alteration, or adjustment or any type of abuse, neglect, accident, misuse, improper operation, normal wear, defects or damage due to lightning or other electrical discharge. This warranty does not cover repair or replacement where normal use has exhausted the life of a part or instrument, or any modification or abuse of, or tampering with, the Product if Product disassembled or repaired in such a manner as to adversely affect performance or prevent adequate inspection and testing to verify any warranty claim. ROSSLARE does not warrant the installation, maintenance, or service of the Product. Service life of the product is dependent upon the care it receives and the conditions under which it has to operate. In no event shall Rosslare be liable for incidental or consequential damages. Limited Warranty Terms THIS WARRANTY SETS FORTH THE FULL EXTENT OF ROSSLARE ENTERPRISES LTD. AND ITS SUBSIDIARIES WARRANTY THE TERMS OF THIS WARRANTY MAY NOT BE VARIED BY ANY PERSON, WHETHER OR NOT PURPORTING TO REPRESENT OR ACT ON BEHALF OF ROSSLARE. THIS LIMITED WARRANTY IS PROVIDED IN LIEU OF ALL OTHER WARRANTIES. ALL OTHER WARRANTIES EXPRESSED OR IMPLIED, INCLUDING WITHOUT LIMITATION, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE SPECIFICALLY EXCLUDED. IN NO EVENT SHALL ROSSLARE BE LIABLE FOR DAMAGES IN EXCESS OF THE PURCHASE PRICE OF THE PRODUCT, OR FOR ANY OTHER INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES, INCLUDING BUT NOT LIMITED TO LOSS OF USE, LOSS OF TIME, COMMERCIAL LOSS, INCONVENIENCE, AND LOSS OF PROFITS, ARISING OUT OF THE INSTALLATION, USE, OR INABILITY TO USE SUCH PRODUCT, TO THE FULLEST EXTENT THAT ANY SUCH LOSS OR DAMAGE MAY BE DISCLAIMED BY LAW. THIS WARRANTY SHALL BECOME NULL AND VOID IN THE EVENT OF A VIOLATION OF THE PROVISIONS OF THIS LIMITED WARRANTY. HomeLogiX Installer Manual Page 50 TECHNICAL SUPPORT Annex V. Asia Pacific, Middle East, Africa TECHNICAL SUPPORT Rosslare Security Products Headquarters 905-912 Wing Fat Industrial Bldg, 12 Wang Tai Road, Kowloon Bay Hong Kong
+852 2795-5630 Tel:
Fax:
+852 2795-1508 E-mail: support.apac@rosslaresecurity.com United States and Canada 1600 Hart Court, Suite 103 Southlake, TX, USA 76092 Toll Free: +1-866-632-1101
+1-817-305-0006 Local:
Fax:
+1-817-305-0069 E-mail: support.na@rosslaresecurity.com Europe Global Technical Support & Training Center HaMelecha 22 Rosh HaAyin, Israel 48091
+972 3 938-6838 Tel:
Fax:
+972 3 938-6830 E-mail: support.eu@rosslaresecurity.com South America Pringles 868, 1640 Martinez Buenos Aires Argentina Tel:
Fax:
E-mail: support.la@rosslaresecurity.com
+54 11 4798-0095
+54 11 4798-2228 Web Site: www.rosslaresecurity.com Page 51 HomeLogiX Installer Manual www.rosslaresecurity.com 0 0
8 2 3 0 6 9 0
6 0 7 0
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2009-11-18 | 433.92 ~ 433.92 | DSR - Part 15 Remote Control/Security Device Transceiver | Original Equipment |
2 | JBP - Part 15 Class B Computing Device Peripheral |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 2 | Effective |
2009-11-18
|
||||
1 2 | Applicant's complete, legal business name |
Rosslare Enterprises Ltd
|
||||
1 2 | FCC Registration Number (FRN) |
0008472821
|
||||
1 2 | Physical Address |
Room 905
|
||||
1 2 |
Kowloon Bay, Kowloon, N/A
|
|||||
1 2 |
Hong Kong
|
|||||
app s | TCB Information | |||||
1 2 | TCB Application Email Address |
k******@emcc.de
|
||||
1 2 | TCB Scope |
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
||||
app s | FCC ID | |||||
1 2 | Grantee Code |
GCD
|
||||
1 2 | Equipment Product Code |
SP-N6G
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 2 | Name |
J**** L******
|
||||
1 2 | Title |
Engineering Manager
|
||||
1 2 | Telephone Number |
847-8********
|
||||
1 2 | Fax Number |
847-8********
|
||||
1 2 |
j******@rel-napdc.com
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 2 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 2 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 2 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 2 | Equipment Class | DSR - Part 15 Remote Control/Security Device Transceiver | ||||
1 2 | JBP - Part 15 Class B Computing Device Peripheral | |||||
1 2 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | HomeLogiX | ||||
1 2 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 2 | Modular Equipment Type | Does not apply | ||||
1 2 | Purpose / Application is for | Original Equipment | ||||
1 2 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | Yes | ||||
1 2 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 2 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 2 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 2 | Firm Name |
Elbit Systems Land C41Tadiran Ltd.
|
||||
1 2 | Name |
S******** C******
|
||||
1 2 | Telephone Number |
97235********
|
||||
1 2 | Fax Number |
97235********
|
||||
1 2 |
s******@elbitsystems.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15.231 | CC | 433.92000000 | 433.92000000 | ||||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
2 | 1 | 15B | CC |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC