FCC ID: 2AUNZROTOA001 Roto VR Chair

Box Contents Here is a complete list of everything youll find inside your Roto VR Boxes. If you find that anything is missing, please e-mail us at customerservice@rotovr.com. Box 1 Base 1. Base and Cable Magazine

(already installed) 2. Foot Pedals Box 2 Chair 5. Chair Backrest + Rumble (B) 6. Chair Seat + Arms + Rumble (C) 7. Chair Headrest 8. Chair Seat Cushion 9. Base Column 10. Left Hinge 11. Right Hinge 12. Left Hinge Upper Cover 13. Left Hinge Lower Cover 14. Right Hinge Upper Cover 15. Right Hinge Lower Cover 4x M5 Screws M8, M6, M5, M3 Hex Key Box 3 Accessories 16. Left Side Table 17. Right Side Table 18. Laptop Table 19. Laptop Table Leg 20. Arm/Leg Connector 21. Racing Wheel Table Support Box 4 Extras 27. Head Tracker + Charging Cable 28. Main PCB Box 29. Emergency Button + Cable (N) 3. Metal Bracket 4. Power Supply + Cable (J) Cables:

(A) Short Power Cable

(D) Micro USB to USB

(E) Micro USB to USB

(F) Micro USB to USB

(G) Splitter Cable

(H) Aux Cable

(I) USB Type C to Type B USB

(L) USB to USB (PC)

(M)Vive Cable

(O) T150 Long Power Cable 22. Racing Wheel Pedal Support 23. Silicon Basket 24. Racing Pack Footrest 25. Short Extension Arm 26. Long Extension Arm 10 x Velcro Straps USB Extension Cable Roto VR is a UK Ltd company. Companies House: 9473421. VAT Reg: 241423444. 28 Church Road, Stanmore, Middlesex, HA7 4XR, United Kingdom www.rotovr.com Assembly Instructions TIP: please note we have constructional videos on our website to help guide you through each step. If you have any questions please get in touch at setuphelp@rotovr.com 1. Turn Chair Seat upside down and 2. Place Bracket onto Chair Seat 4. Place Column into Metal Bracket remove the 4 screws, mini-

springs and washers with the longer side facing the rumble 3. Screw Metal Bracket into place with the 4 screws, with washer and mini-spring in between screw and bracket 5. Remove the bolt on the Central Tube located opposite the Cable Magazine sockets 6. Place the Touch 7. Align the Touch 8. Screw the bolt Pedal Tube

(footrest) over the Base Central Tube Pedal (footrest) window with the Cable Magazine back into the Central Tube to secure in place sockets Roto VR is a UK Ltd company. Companies House: 9473421. VAT Reg: 241423444. 28 Church Road, Stanmore, Middlesex, HA7 4XR, United Kingdom www.rotovr.com TIP: aligning and screwing in the Left and Hinge can be a bit fiddly. We highly recommend two people to do this task. Also loosely screw in each of the 4 screws before tightening. 9. Place the Seat into the Base Central Tube 10. Align and screw the side bolts into the Central Tube 11. Align and screw the Right Hinge into bottom right side of 12. Align and screw Left Hinge into bottom left side of Chair Seat Chair Seat and secure in place

(tip: wiggle the chair slightly as you screw them in) 13. Screw the Right Hinge into the top right side of Chair Backrest 14. Screw the Left Hinge into top left side of Chair Backrest 15. Screw the 16. Screw the Bottom Right Hinge Cover into place

(tip: the screw isnt very long, so please Bottom Left Hinge Cover into place

(tip: the screw isnt very long, so please press firmly whilst press firmly whilst doing so) doing so) Roto VR is a UK Ltd company. Companies House: 9473421. VAT Reg: 241423444. 28 Church Road, Stanmore, Middlesex, HA7 4XR, United Kingdom www.rotovr.com 17. Screw Top Right Hinge Cover over Right Hinge 18. Screw Top Left Hinge Cover over Left Hinge 19. Push Headrest into the top of the Chair Backrest (tip:

press and hold the button in on the top of the chair whilst inserting the headrest) WARNING: Any wired device must be connected through the stem and base of the Roto chair. NEVER hold or mount a wired device that isnt connected through the stem of the Roto chair. Make sure there are no loose wires anywhere on or near Roto. Please use the velco strips provided to secure all wires. Accidental misuse can be dangerous and result in serious injury or death. Roto VR is a UK Ltd company. Companies House: 9473421. VAT Reg: 241423444. 28 Church Road, Stanmore, Middlesex, HA7 4XR, United Kingdom www.rotovr.com What is Roto?

Roto has been designed to make 360-degree exploration comfortable, effortless, productive and immersive. What games does Roto work with?

Roto adds fun and immersion to all types of games and experiences. We will grow a recommended content list on our website, so please share with us your favourite experiences and setups so we can let everyone else know. Wed also love it if you would share any videos of your setups with us. We find the best experiences with Roto are in 360 degrees in VR. Rotos Headtracking feature enables comfortable viewing with all 360-degree content (Roto auto-turns to wherever you look), whilst the rumble packs add immersive feeling with haptic (vibration) feedback. Roto has lots of other features to explore including Touch Pedals underneath each foot (for walking in VR) which will need developer support before being able to use them. Were excited by the possibilities of how developers make use of Rotos expansive and unique features. If youre a developer, please do get in touch. What should I wire up?

How you wire up your Roto depends on which particular features or functions you wish to use at any particular time. Whilst Roto supports many different types of headsets and accessories, we recommend to wire up as little as possible at any given time, as some PCs and software are not great at handling too many USB devices simultaneously. If you experience any problems, we recommend disconnecting and then reconnecting all connections, especially the last USB cable which goes into your PC as it then reconfigures all the USB devices. Roto VR is a UK Ltd company. Companies House: 9473421. VAT Reg: 241423444. 28 Church Road, Stanmore, Middlesex, HA7 4XR, United Kingdom www.rotovr.com Using HTC Vive or Oculus with Roto Set up your VR Headset and PC normally, as if you didnt have a Roto. Once the headset is fully operational and you can see the menu (or game) inside the headset, then you are ready to set up Roto. Tip: Please see the setup videos for on our website. Connect the cables (and 12.5V power connector for Vive) into the Disconnect the Headset from (if using Oculus) or Vive Breakout Box (if 1) using Vive) 2) Cable Magazine sockets inside the Central Tube of the Roto chair. Connect the Vive USB male connector into the USB Socket labelled B (the data line) or into Side B of the Control Box (ensure the control box is connected to the Cable Magazine using Cable E). Roto VR Headtracker Headtracking Mode is great for exploring 360 degree content. Roto will auto-turn to wherever you look. Charge the headtracker using a USB-micro cable provided. Pair the Headtracker with the Roto base by pressing the Mode button 1) 2) on the side of the Headtracker whilst also pressing the Bluetooth Pairing button on the Roto Base. Bluetooth Pair/Mode button USB charge Attach the Once the Headtracker is paired it will beep and show a green flashing light. 3) headtracker to the Headset. Clip of the Headtracker to your Headset by sliding the Headtracker vertically over the Headset side. Each headset offers different locations to clip onto. Please ensure the Headtracker is securely positioned. Roto VR is a UK Ltd company. Companies House: 9473421. VAT Reg: 241423444. 28 Church Road, Stanmore, Middlesex, HA7 4XR, United Kingdom www.rotovr.com Please do not stress the clip too much by attaching to thick plastic. The clip itself will eventually start to deform. Looking straight ahead, put on the Headset, press the Mode Button (on Find the Mode button on the side of the Headtracker. Get ready to 4) press it once youve put on the Headset. 5) the Headtracker) and wait for two beeps. Please make sure you are looking straight and with your head still during this process. The second Beep signifies Roto is calbirated and will auto-turn to wherever you look. 6) Headtracking Mode, the second to re-enter Headtracking Mode). Recalibrate any time by pressing the Mode Button twice (once to exit NOTE: The Headtracker will only switch into Headtracking Mode if the Headset is actually on the users head. If the user removes their headset, Headtracking Mode will be disengaged automatically. This is a safety feature. Stow the Headtracker inside the recess area of the chair arms for protection and to reduce accidental loss. We like playing all sorts of experiences in Headtracking Mode, including adventure games, 1st person shooters and watching movies. Check out www.rotovr.com for a list of our favourite titles we recommend with Roto. Cockpit Mode: connect a gamepad*, wheel* or HOTAS*

Cockpit Mode is for great for games and experiences where it doesnt make sense to turn around 360 degrees with Headtracking. Flying and Racing games are examples of what we call Cockpit Games, where the player is usually drawn inside a cockpit environment. In Cockpit Mode, Rotos motorised turns are controlled directly by the game controller - and the chair movements are limited to 30 degreees left and right. This keeps the user facing the in correct general direction for the game whilst also offering massive immersive benefits. To activate Cockpit Mode:

Download and install the Roto PC Desktop application from our 1) website www.rotovr.com Connect Roto to the PC via USB (allow for any auto-installations) 2) Connect your gamepad, wheel or joystick (can be anything Windows 3) recognises as a USB HID game controller device). The device should show up in the Roto application. Roto VR is a UK Ltd company. Companies House: 9473421. VAT Reg: 241423444. 28 Church Road, Stanmore, Middlesex, HA7 4XR, United Kingdom www.rotovr.com 4) Using your mouse, tick the Cockpit Mode box Use accessories such as the Racing Pack mounts or Tablettes to set up your Roto devices as comfortably as possible. Before turning on Roto, ALWAYS check every wire is safely connected and there are no loose wires anywhere. When using a wheel or joyatick, ALWAYS ensure the accessory is firmly secured, screwed or clamped in position before turning Roto on. NEVER connect a device thats atop the Roto chair to anything off the chair. ONLY connect devices to the Control Box and through the stem of the Roto central pole. Use the USB cable from the Roto base to the PC to connect all the devices that are connected on the chair. DANGER: Cables will start to wind up extremely quickly if not secured properly, which can lead to serious property and personal injury. Roto VR Ltd accepts no responsibility or liability for any harm or damage caused through misuse.

*As recognised by Windows/PC as a games controller, such a steering wheel, joystick, HOTAS etc. Roto VR is a UK Ltd company. Companies House: 9473421. VAT Reg: 241423444. 28 Church Road, Stanmore, Middlesex, HA7 4XR, United Kingdom www.rotovr.com Freeplay Mode:

The features are exactly the same as Cockpit Mode except Roto can turn 360 degrees continuously. Tick the Free Mode box in the Roto PC Desktop Application to activate. Programming with Roto Experienced developers can download our free SDK to create Roto-optimised experiences. Please share with our Roto community at www.rotovr.com/developerportal. Care and Maintenance Your device is a product of superior design and craftsmanship and should be treated with care. The suggestions below will help you to protect your warranty coverage:

Do not use or store the device in hot areas. High temperatures can Do not use or store the device in dusty, dirty areas, as moving parts Keep the device dry. Precipitation, humidity and all types of liquid or Keep your device out of the reach of small children, pets and indeed anyone or anything that might be in danger of contact during usage (bearing in mind the user cannot or hear (real life surroundings) once play has begun. moisture can contain minerals that will corrode electronic circuits. If your device does get wet, allow it to dry completely. and electronic components of your device can be damaged. shorten the life of electronic devices, damage batteries and warp or melt certain plastics. Do not use or store the device in cold areas. When the device returns to its normal temperature, moisture can form inside the device and damage electronic circuit boards. internal circuit boards and fine mechanics. Do not use harsh chemicals, cleaning solvents or strong detergents to clean the device. All of the previous suggestions apply equally to your device, battery, charger or any enhancements. Do not drop, knock or shake the device. Rough handling can break Roto VR is a UK Ltd company. Companies House: 9473421. VAT Reg: 241423444. 28 Church Road, Stanmore, Middlesex, HA7 4XR, United Kingdom www.rotovr.com Troubleshooting Please go to www.rotovr.com/troubleshooting Helpline Information:

The helpline is a one-to-one live service. 9.00am - 5.00pm Monday to Hours:

Thursday 9.00am 5.0pm Friday

+44 (0) bla bla customerservice@rotovr.com Tel:

Email:

Website: www.rotovr.com To ensure that your call is handled quickly and efficiently please check that you have the product serial number (located on underside of the Roto base) and any other relevant information regarding your product at the time of your call. For the most up to date instructions please go to www.rotovr.com/instructions Please share your favourite Roto moments at www.rotovr.com/seemespin Developers can download our SDK from www.rotovr.com/DeveloperPortal Roto VR is a UK Ltd company. Companies House: 9473421. VAT Reg: 241423444. 28 Church Road, Stanmore, Middlesex, HA7 4XR, United Kingdom www.rotovr.com Before operate the Roto The socket-outlet shall be installed near the equipment and shall be easily accessible. Roto shall be used with the included adaptor model GST280A24 only (Mean Well). Safety of Head Tracker Lithium rechargeable battery CAUTION: Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions. FCC and IC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. CAN ICES-3(B)/NMB-3(B) This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device. FCC/IC RADIATION EXPOSURE STATEMENT:

This equipment complies with FCC/IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. DECLARATION DE LA FCC ET D'IC Lmetteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme aux CNR dInnovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes : (1) Lappareil ne doit pas produire de brouillage; (2) Lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. Roto VR is a UK Ltd company. Companies House: 9473421. VAT Reg: 241423444. 28 Church Road, Stanmore, Middlesex, HA7 4XR, United Kingdom www.rotovr.com DCLARATION IC RELATIVE L'EXPOSITION AUX RADIOFRQUENCES :

Cet appareil est conforme aux limites dexposition aux radiofrquences prvues par la norme RSS-102, tablies pour un environnement non contrl. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Roto VR is a UK Ltd company. Companies House: 9473421. VAT Reg: 241423444. 28 Church Road, Stanmore, Middlesex, HA7 4XR, United Kingdom www.rotovr.com

Roto Base - bottom sticker W 62 xH 57 (mm) OLO www.rotovr.com Model: RotoA001 FCC ID: 2AUNZROTOA001 MADE IN CHINA / FABRIQUE EN CHINE FCC AND IC STATEMENT:

i. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two |

conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. ii. CAN ICES-3(B)/NMB-3(B)

OCO Roto VT Ltd has invested considerable time and materials in research and development to produce Rationale for request for confidentiality:

the referenced product. Disclosure of the permanently confidential portions of this application to competitors would not only give them significant competitive advantages in developing similar products, but would also disclose successful implementation of unpublished, leading edge technology developed by us. Disclosure of the short-term confidential portions of this application during the period of importation and/or distribution would reveal key aspects of proprietary technology to competitors and diminish the value of our investment in research and development. Sincerely, See (Signature) Elliott, Myers ke CEO (Title) Roto VR Ltd

OCO Letter of Agency I, an officer of Roto VR Ltd do hereby authorize Intertek Testing Services (Mr. Terry Chan / Tim Lee/ Herbert Wong / Kenneth Wong) to act on our behalf in front of the Federal Communications Commission with respect to all matters relating to certification of equipment under Part 15 and Part 18 of the FCC Rules until further notice. I further certify that no party (as defined in 1.2002(b) of CFR 47, 2004) to this application, including myself, is subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C.,862. Dated this 11 day October of 2019 OA, (Signature) Elliott, Myers (Name) CEO (Title)