Keypad XMB611 I N S T A L L A T I O N D A T A S H E E T Made by RSI VIDEO TECHNOLOGIES 1010-XMBIN February 2012 Product Summary Installation Guidelines The Indoor Keypad Model XMB611 is designed for use in configuring/programming and operating a VideofiedTM security system. The keypad includes the following features:
For easier installation, programming and RF testing should be completed before mounting the control panel and devices.
> Lithium batteries for long life.
> 2-line, 16-character alphanumeric LCD display
> Built-in badge reader for arming/disarming
> Built-in piezo for status and alarm sounds
> Dual tamper function provides detection of both wall and cover tamper.
> Transmits check-in/status signal every 8 minutes. Install the keypad and other system devices in the following order:
> Programming/RF Testing - Program keypad and all other devices into the control panel and test RF communication from each intended device location to the control panel.
> Mounting - Mount keypad and devices at the tested location. Programming/RF Testing*
1 Open the casing by turning the button toward the opened padlock symbol and press down lightly on the button to separate the cover. 2 Insert 3 (minimum) or 4 (for longer life) SAFT 3.6v Lithium AA LS14500 batteries. 3A New Installation: Put the control panel into keypad registration mode by pressing the programming button of the control panel one time. OR 3B Adding to existing system: Using a programmed alphanumeric keypad, proceed through menus until the display shows ADD A NEW DEVICE. Press Yes. The display shows PRESS PROGRAM BUTTON OF DEVICE. OR 3C Adding to existing system without a keypad: Refer to the installation manual of the control panel. 4 Press and release the programming buttons (CLR and ESC/NO) on the XMB keypad. The keypad LED will flash. Wait for keypad display to show KEYPAD# RECORDED. 5 Press Yes. The display shows LANGUAGE: ENGLISH. Press Yes. (This prompt will only appear when performing a new installation). 6 Display shows RADIO RANGE TEST? Press YES, the keypad starts displaying the number of successful pings to and from the control panel out of 9 (0/9 to 9/9). Devices must be installed in a location with a stable 9/9 RF test result to ensure reliable communication. 7 Press YES to end radio range test, then press Esc/No. Note: If this is a new installation (3A), the keypad display prompts other system configuration data. If adding a keypad to an existing (operational) system, proceed to step 8. 8 When finished, exit from configuration mode. Note: The control panel automatically assigns alphanumeric keypads automatically to Area 1 (Entry/Exit delay)
*For complete details, refer to the control panel installation manual. www.videofied.com Keypad XMB611 I N S T A L L A T I O N D A T A S H E E T 1. Mounting
> Use proper tools and hardware.
> Mount indoor in a temperature-controlled environment.
> Mount keypad at height that provides proper viewing and convenience for the customer.
> Mount in a location that provides customer convenience but out of view from windows. 1 Separate base from Keypad. 2 Hold base against mounting surface and mark the three mounting holes. Use the left or right side to level the keypad. 3 Drill pilot holes and install anchors where needed. 4 Place base on mounting surface so holes line up with pilot holes/anchors and secure base with appropriate screws. 5 Attach Keypad to base and secure by turning the button to the closed padlock symbol. Note: The XMB611 Keypad is a supervised device and must be permanently mounted. This product is not intended for portable use. 2. LCD Overview Mounting Holes Icons for entry mode:
a..z Lowercase A..Z Uppercase 123 Keypad
Symbols Information Icon Low Battery Icon Icons for arming mode:
Partition 1 or SP1 selected Partition 2 or SP2 selected Unused External arming mode selected Unused www.videofied.com Keypad XMB611 I N S T A L L A T I O N D A T A S H E E T 4. Removal of Protective Film They keypad is protected by a transparent film. It is important to remove this film before using the keypad. 3. Product Overview LCD display with automatic backlight Menu Navigation Assistance Requests Red /
Green LED Arming Keys RFID Badge reading zone 5. RFID Tag Reading 6. Keypad Use The XMB keypad is equipped with a badge reader ISO/IEC 14443A. The optimal reading area is located around the 0 key. Compatible with MiFare 13.56MHz 1K/4K badges. The badge reader is inactive until approached by a user. The system utilizes a capacitive detector to energize the badge reader. It is recommended the user holds the badge in place in front of the reader rather than a quick swipe. Keys Panic OK ESC CLR When a badge is detected the Green LED is lit for a few seconds. Symbols 7. Security
- Remove batteries before any maintenance
- WARNING, there is a risk of explosion if a battery is replaced by an incorrect type!
- Observe polarity when inserting batteries
- Do not throw away used batteries they must be properly disposed of according to Hazardous material regulations for Lithium batteries Special Characters Description The panic request is launched in two steps:
1. 3 second press on the PANIC key 2. 1 second press on one of the three assistance keys
- The transmitted event type and siren activity depend on programming Used to confirm any data capture or acknowledge messages Exits the current menu or cancels all data entered Deletes the last character entered The symbols: 1 . _ @ $ , ? ! ; : ( =space) are accessed through the 1 key With multiple 1 second presses on the 1 key, the user is able to select the symbol they are looking for. By pressing and holding the 1 key, the line with all symbols will show. Use the arrow keys to select the symbol and press OK to confirm. Special Characters +0-*#=/%& <>() are accessed through the 0 key With multiple 1 second presses on the 0 key the user is able to select the special character they are looking for. By pressing and holding the 1 key, the line with all symbols will show. Use the arrow keys to select the symbol and press OK to confirm. Capital Letter Press and hold appropriate letter key then repeat press Auto-Repeat mode Re-sync and Enrollment When a user holds an arrow key, the keypad will scroll all available values Press and release ESC/NO and CLR buttons simultaneously www.videofied.com Keypad XMB611 I N S T A L L A T I O N D A T A S H E E T FCC Regulatory Information for USA and CANADA FCC Part 15.21 Changes or modifications made to this equipment not expressly approved by RSI VideoTechnologies may void the FCC authorization to operate this equipment. FCC Part 15.105 Class B This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Radio frequency radiation exposure information according 2.1091 / 2.1093 / OET bulletin 65 This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 20 cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This device complies with Part 15 of the FCC Rules and with RSS-210 of Industry Canada. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation. www.videofied.com Keypad XMB611 I N S T A L L A T I O N D A T A S H E E T 8. Specifications Electrical Data Physical Data Panel Compatibility Videofied Alarm Panel XL,XT,XTIP, V6000 Material Power requirements:
Type:
3.6v SAFT Lithium, LS14500, AA Batteries Only Dimensions 2.1v - LCD will stop functioning but communication is working 3.0v - LCD will function and communication is working 3.6v Weight Installation/Mounting ABS UL94-V0
(LxWxD):6.3 x 3.6 x 1.2 Inches
(160 x 92 x 31 mm) 6.35oz (180gr) without batteries Nominal Voltage:
Low Voltage Limit:
Quantity Battery life (estimated) RF technology:
Radio type Operating frequency Transmission security Supervision Antenna Tamper detection Keypad:
Keys:
Allowed Time for Code Entry:
3x or 4x Up to 4 years Wall Mount Case Lock 3 Screws (including one for the tamper) Mechanical lock and optional screw Certification & Approvals FCC Part 15C UL1023 (Applied For) RSS210 2 way S2View RSI Technologies USA 915MHz frequency hopping Spread Spectrum Bidirectional RF 915 MHz Canada AES algorithm encryption Panel polls devices every 8 minutes Integrated Wall and cover tampered 23x Keys 60s Number of Illegal codes:
186 (depending on panel features) User code input attempts before lockout:
5 90 seconds Lockout duration:
Memory Lifetime:
Assistance Request Display type Display size Display backlighting Badge Reader:
Format:
Type:
Built-in sounder:
Piezo Buzzer:
Panic button No Limit (Flash Memory) Police/Medical/Fire Liquid-crystal (LCD) Two lines, 16 characters each Automatic ISO/IEC 14443A MiFare 13.56MHz 1K/4K Emits entry/exit delay beeps, alarms One (Must be programmed/Enabled) Operating temperature Maximum relative humidity 14 - +104 F (-10 - +40 C) 75%, non-condensing EMEA SALES 23, avenue du Gnral Leclerc 92340 BOURG-LA-REINE FRANCE Hotline: +33 (0)820 846 620 Fax: +33 (0)1 82 69 80 10 USA SALES 4455 White Bear Parkway, Suite 700 White Bear Lake, MN 55110 USA Hotline: +1 877 206 5800 Fax: +1 651 762 4693 www.videofied.com 2011 RSI VIDEO TECHNOLOGIES. VIDEOFIED is a Registered Trademark of RSI VIDEO TECHNOLOGIES. S2View is a registered trademark of RSI VIDEO TECHNOLOGIES. Specifications subject to change without notice.