app
s
|
Applicant Information
|
|
1 2 3 4 5
|
Effective |
2020-07-29
|
1 2 3 4 5
|
2019-06-25
|
1 2 3 4 5
|
2019-06-13
|
1 2 3 4 5
|
Applicant's complete, legal business name |
Ruckus Wireless, Inc.
|
1 2 3 4 5
|
FCC Registration Number (FRN) |
0013389887
|
1 2 3 4 5
|
Physical Address |
350 West Java Drive
|
1 2 3 4 5
|
Sunnyvale, CA
|
1 2 3 4 5
|
United States
|
|
app
s
|
TCB Information
|
1 2 3 4 5
|
TCB Application Email Address |
T******@TIMCOENGR.COM
|
1 2 3 4 5
|
t******@siemic.com
|
1 2 3 4 5
|
TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
|
app
s
|
FCC ID
|
1 2 3 4 5
|
Grantee Code |
S9G
|
1 2 3 4 5
|
Equipment Product Code |
R750
|
|
app
s
|
Person at the applicant's address to receive grant or for contact
|
1 2 3 4 5
|
Name |
I******** T********
|
1 2 3 4 5
|
Title |
Principal Wireless Compliance Engineering
|
1 2 3 4 5
|
Telephone Number |
1-408********
|
1 2 3 4 5
|
Fax Number |
1-408********
|
1 2 3 4 5
|
E-mail |
c******@commscope.com
|
1 2 3 4 5
|
c******@ruckuswireless.com
|
|
app
s
|
Technical Contact
|
|
|
n/a |
|
app
s
|
Non Technical Contact
|
|
|
n/a |
|
app
s
|
Confidentiality (long or short term)
|
1 2 3 4 5 |
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No |
1 2 3 4 5 | Yes |
1 2 3 4 5 | Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No |
1 2 3 4 5 | Yes |
1 2 3 4 5 | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 12/22/2019 |
1 2 3 4 5 | 12/10/2019 |
|
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
|
|
|
app
s
|
Cognitive Radio & Software Defined Radio, Class, etc
|
1 2 3 4 5 |
Is this application for software defined/cognitive radio authorization? | No |
1 2 3 4 5 | Equipment Class | NII - Unlicensed National Information Infrastructure TX |
1 2 3 4 5 | DTS - Digital Transmission System |
1 2 3 4 5 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Access Point |
1 2 3 4 5 | R750 Access Point |
1 2 3 4 5 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | Yes |
1 2 3 4 5 | No |
1 2 3 4 5 | Modular Equipment Type | Does not apply |
1 2 3 4 5 | Purpose / Application is for | Class II Permissive Change |
1 2 3 4 5 | Original Equipment |
1 2 3 4 5 | Composite Equipment: Is the equipment in this application a composite device subject to an
additional equipment authorization? | Yes |
1 2 3 4 5 | Related Equipment: Is the equipment in this application part of a system
that operates with, or is marketed with, another device that requires an equipment authorization? | No |
1 2 3 4 5 | Grant Comments | Power listed is the maximum combined conducted output power. Device is certified as 15.407(a) 1)(ii) as indoor access point. Operation in 5.15-5.25 GHz band is for indoor use only. Device is a 4x4 MIMO configuration as described in this filing. This device has a 20 MHz, 40 MHz, 80 and 80+80 MHz bandwidth mode. Product requires professional installation. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. Professional installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.
C2PC: Enable the function of partial resource unit (RU) for 802.11ax mode via embedded software. Enable 80MHz+ 80MHz operating mode via embedded software. |
1 2 3 4 5 | Original grant comment: Power listed is the maximum combined conducted output power. Device is a 4x4 MIMO configuration as described in this filing. This device has a 20 MHz, 40 MHz bandwidth mode. Product requires professional installation. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. Professional installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.
C2PC: Enable the function of partial resource unit (RU) for 802.11ax mode via embedded software. |
1 2 3 4 5 | C2PC to add DFS bands via SW.
Original grant comment:
Power listed is the maximum combined conducted output power. Device is certified as 15.407(a) 1)(ii) as indoor access point. Operation in 5.15-5.25 GHz band is for indoor use only. Device is a 4x4 MIMO configuration as described in this filing. This device has a 20 MHz, 40 MHz, and 80 MHz bandwidth mode. Product requires professional installation. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. Professional installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
1 2 3 4 5 | Power listed is the maximum combined conducted output power. Device is certified as 15.407(a) 1)(ii) as indoor access point. Operation in 5.15-5.25 GHz band is for indoor use only. Device is a 4x4 MIMO configuration as described in this filing. This device has a 20 MHz, 40 MHz, and 80 MHz bandwidth mode. Product requires professional installation. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. Professional installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
1 2 3 4 5 | Power listed is the maximum combined conducted output power. Device is a 4x4 MIMO configuration as described in this filing. This device has a 20 MHz, 40 MHz bandwidth mode. Product requires professional installation. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. Professional installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
1 2 3 4 5 | Is there an equipment authorization waiver associated with this application? | No |
1 2 3 4 5 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No |
|
app
s
|
Test Firm Name and Contact Information
|
1 2 3 4 5
|
Firm Name |
Sporton International (USA) Inc
|
1 2 3 4 5
|
BUREAU VERITAS CONSUMER PRODUCTS SERVICES, INC.
|
1 2 3 4 5
|
Bureau Veritas Consumer Products Services, Inc.
|
1 2 3 4 5
|
Name |
K****** L******
|
1 2 3 4 5
|
S******** L********
|
1 2 3 4 5
|
L**** B********
|
1 2 3 4 5
|
Telephone Number |
16692********
|
1 2 3 4 5
|
978 6******** Extension:
|
1 2 3 4 5
|
408-5********
|
1 2 3 4 5
|
Fax Number |
97848********
|
1 2 3 4 5
|
408 5********
|
1 2 3 4 5
|
E-mail |
K******@sporton-usa.com
|
1 2 3 4 5
|
s******@us.bureauveritas.com
|
1 2 3 4 5
|
l******@siemic.com
|
|