FCC ID: 2ABTU-9260NG Intel R Wireless-AC 9260

by: RuggON Corporation latest update: 2020-09-25 model: 9260NG

Seven grants have been issued under this FCC ID from 07/06/2020 to 09/25/2020 (this is one of twenty releases in 2020 for this grantee). Public details available include manuals, internal & external photos, and frequency information. some products also feature user submitted or linked instructions, troubleshooting guides, warrantee terms, drivers, & password defaults.
permalink for this FCC identifier
search for: Repair details
from iFixIt
Replacement
on Amazon
Trade-in? Recycling locations
eg is reader-supported. when you buy through links on our site, we may earn an affiliate commission.
|
|
|   
eg for Slack usage
app s submitted / available
1 2 3 4 5 6 7 9260NGW- Inpho Internal Photos pdf 187.82 KiB September 24 2020 / September 25 2020
1 2 3 4 5 6 7 9260NGW- Expho External Photos pdf 565.77 KiB September 24 2020 / September 25 2020
1 2 3 4 5 6 7 9260NGW- LabelLoc ID Label/Location Info pdf 66.80 KiB July 03 2020 / July 06 2020
1 2 3 4 5 6 7 9260NGW- Labelsmpl ID Label/Location Info pdf 15.68 KiB July 03 2020 / July 06 2020
1 2 3 4 5 6 7 9260NGW- ATTESTATION Cover Letter(s) pdf 119.77 KiB September 24 2020 / September 25 2020
1 2 3 4 5 6 7 9260NGW- Class II Change Cover Letter(s) pdf 25.42 KiB September 24 2020 / September 25 2020
1 2 3 4 5 6 7 9260NGW- Confidentiality Request-signed Cover Letter(s) pdf 157.03 KiB September 24 2020 / September 25 2020
1 2 3 4 5 6 7 9260NGW- Declaration of authorization-signed Cover Letter(s) pdf 39.04 KiB September 24 2020 / September 25 2020
1 2 3 4 5 6 7 9260NGW- Declaration Intel 9260NGW Dipole Ruggon Cover Letter(s) pdf 20.43 KiB September 24 2020 / September 25 2020
1 2 3 4 5 6 7 9260NGW- RFExp RF Exposure Info pdf 413.42 KiB September 24 2020 / September 25 2020
1 2 3 4 5 6 7 9260NGW- TestRpt 15.247 Test Report pdf 1.64 MiB September 24 2020 / September 25 2020
1 2 3 4 5 6 7 9260NGW- TestRpt BLE Test Report pdf 1.01 MiB September 24 2020 / September 25 2020
1 2 3 4 5 6 7 9260NGW- Tsup Test Setup Photos pdf 874.47 KiB September 24 2020 / September 25 2020
1 2 3 4 5 6 7 Confidential 9260NGW- OPDes 15.247 Operational Description pdf September 24 2020 confidential
1 2 3 4 5 6 7 Confidential 9260NGW- OPDes BLE Operational Description pdf September 24 2020 confidential
1 2 3 4 5 6 7 9260NGW- TestRpt 15.407 Test Report pdf 4.74 MiB September 24 2020 / September 25 2020
1 2 3 4 5 6 7 Confidential 9260NGW- OPDes 15.407 Operational Description pdf September 24 2020 confidential
1 2 3 4 5 6 7 9260NGW- TestRpt Test Report pdf 1.00 MiB September 24 2020 / September 25 2020
1 2 3 4 5 6 7 Confidential 9260NGW- OPDes Operational Description pdf September 24 2020 confidential
1 2 3 4 5 6 7 9260NGW- Declaration letter for electrically identical Cover Letter(s) pdf 74.05 KiB July 03 2020 / July 06 2020
1 2 3 4 5 6 7 9260NGW- Declaration of authorization Cover Letter(s) pdf 91.17 KiB July 03 2020 / July 06 2020
1 2 3 4 5 6 7 9260NGW- FCC Auth Ltr for Change of ID Ruggon Cover Letter(s) pdf 44.36 KiB July 03 2020 / July 06 2020
1 2 3 4 5 6 7 RF Exposure Info pdf July 03 2020 / July 06 2020
1 2 3 4 5 6 7 9260NGW- Inpho Internal Photos pdf 187.82 KiB September 24 2020 / September 25 2020
1 2 3 4 5 6 7 9260NGW- Expho External Photos pdf 565.77 KiB September 24 2020 / September 25 2020
1 2 3 4 5 6 7 9260NGW- LabelLoc ID Label/Location Info pdf 66.80 KiB July 03 2020 / July 06 2020
1 2 3 4 5 6 7 9260NGW- Labelsmpl ID Label/Location Info pdf 15.68 KiB July 03 2020 / July 06 2020
1 2 3 4 5 6 7 9260NGW- ATTESTATION Cover Letter(s) pdf 119.77 KiB September 24 2020 / September 25 2020
1 2 3 4 5 6 7 9260NGW- Class II Change Cover Letter(s) pdf 25.42 KiB September 24 2020 / September 25 2020
1 2 3 4 5 6 7 9260NGW- Confidentiality Request-signed Cover Letter(s) pdf 157.03 KiB September 24 2020 / September 25 2020
1 2 3 4 5 6 7 9260NGW- Declaration of authorization-signed Cover Letter(s) pdf 39.04 KiB September 24 2020 / September 25 2020
1 2 3 4 5 6 7 9260NGW- Declaration Intel 9260NGW Dipole Ruggon Cover Letter(s) pdf 20.43 KiB September 24 2020 / September 25 2020
1 2 3 4 5 6 7 9260NGW- RFExp RF Exposure Info pdf 413.42 KiB September 24 2020 / September 25 2020
1 2 3 4 5 6 7 9260NGW- TestRpt 15.247 Test Report pdf 1.64 MiB September 24 2020 / September 25 2020
1 2 3 4 5 6 7 9260NGW- TestRpt BLE Test Report pdf 1.01 MiB September 24 2020 / September 25 2020
1 2 3 4 5 6 7 9260NGW- Tsup Test Setup Photos pdf 874.47 KiB September 24 2020 / September 25 2020
1 2 3 4 5 6 7 9260NGW- TestRpt 15.407 Test Report pdf 4.74 MiB September 24 2020 / September 25 2020
1 2 3 4 5 6 7 9260NGW- TestRpt Test Report pdf 1.00 MiB September 24 2020 / September 25 2020
1 2 3 4 5 6 7 9260NGW- Declaration letter for electrically identical Cover Letter(s) pdf 74.05 KiB July 03 2020 / July 06 2020
1 2 3 4 5 6 7 9260NGW- Declaration of authorization Cover Letter(s) pdf 91.17 KiB July 03 2020 / July 06 2020
1 2 3 4 5 6 7 9260NGW- FCC Auth Ltr for Change of ID Ruggon Cover Letter(s) pdf 44.36 KiB July 03 2020 / July 06 2020

frequency equipment class purpose
1 2020-09-25 2422 ~ 2462 DTS - Digital Transmission System Class II Permissive Change
2 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
3 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
4 2020-07-06 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX Change in Identification
5 2422 ~ 2462 DTS - Digital Transmission System
6 JBP - Part 15 Class B Computing Device Peripheral
7 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter

Application Forms

app s Applicant Information
1 2 3 4 5 6 7 Effective 2020-09-25
1 2 3 4 5 6 7 2020-07-06
1 2 3 4 5 6 7 Applicant's complete, legal business name RuggON Corporation
1 2 3 4 5 6 7 FCC Registration Number (FRN) 0023347594
1 2 3 4 5 6 7 Physical Address 4F, No. 298, Yang Guang St. Neihu Dist.
1 2 3 4 5 6 7 4F, No. 298, Yang Guang St.
1 2 3 4 5 6 7 Taipei City, N/A
1 2 3 4 5 6 7 Taiwan
app s TCB Information
1 2 3 4 5 6 7 TCB Application Email Address h******@acbcert.com
1 2 3 4 5 6 7 TCB Scope A4: UNII devices & low power transmitters using spread spectrum techniques
1 2 3 4 5 6 7 A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
app s FCC ID
1 2 3 4 5 6 7 Grantee Code 2ABTU
1 2 3 4 5 6 7 Equipment Product Code 9260NG
app s Person at the applicant's address to receive grant or for contact
1 2 3 4 5 6 7 Name J**** W******
1 2 3 4 5 6 7 Title Manager
1 2 3 4 5 6 7 Telephone Number +886-******** Extension:
1 2 3 4 5 6 7 Fax Number +886-********
1 2 3 4 5 6 7 E-mail j******@ruggon.com
app s Technical Contact
1 2 3 4 5 6 7 Firm Name DEKRA Testing and Certification Co., Ltd
1 2 3 4 5 6 7 Name F****** Y******
1 2 3 4 5 6 7 Physical Address No.5-22, Ruishukeng, Linkou Dist.
1 2 3 4 5 6 7 New Taipei City
1 2 3 4 5 6 7 Taiwan
1 2 3 4 5 6 7 Telephone Number 886-2********
1 2 3 4 5 6 7 Fax Number 886-2********
1 2 3 4 5 6 7 E-mail f******@dekra.com
app s Non Technical Contact
n/a
app s Confidentiality (long or short term)
1 2 3 4 5 6 7 Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:Yes
1 2 3 4 5 6 7 No
1 2 3 4 5 6 7 Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:No
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
app s Cognitive Radio & Software Defined Radio, Class, etc
1 2 3 4 5 6 7 Is this application for software defined/cognitive radio authorization?No
1 2 3 4 5 6 7 Equipment ClassDTS - Digital Transmission System
1 2 3 4 5 6 7 NII - Unlicensed National Information Infrastructure TX
1 2 3 4 5 6 7 DSS - Part 15 Spread Spectrum Transmitter
1 2 3 4 5 6 7 JBP - Part 15 Class B Computing Device Peripheral
1 2 3 4 5 6 7 Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant)Intel R Wireless-AC 9260
1 2 3 4 5 6 7 Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application?No
1 2 3 4 5 6 7 Modular Equipment TypeSingle Modular Approval
1 2 3 4 5 6 7 Purpose / Application is forClass II Permissive Change
1 2 3 4 5 6 7 Change in Identification
1 2 3 4 5 6 7 Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization?Yes
1 2 3 4 5 6 7 Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?No
1 2 3 4 5 6 7 Grant CommentsPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This filing meets RF Exposure requirements of KDB447498 and can be used in mobile configurations. Addition of new dipole type antenna is different from originally antenna type. Manufacturer. WIESON, Part no. GY121HT0321-003-H. Antenna is of lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
1 2 3 4 5 6 7 Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. This transmitter has 20MHz, 40MHz and 80MHz bandwidth modes as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This filing meets RF Exposure requirements of KDB447498 and can be used in mobile configurations. Addition of new dipole type antenna is different from originally antenna type. Manufacturer. WIESON, Part no. GY121HT0321-003-H. Antenna is of lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
1 2 3 4 5 6 7 Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. This filing meets RF Exposure requirements of KDB447498 and can be used in mobile configurations. Addition of new dipole type antenna is different from originally antenna type. Manufacturer. WIESON, Part no. GY121HT0321-003-H. Antenna is of lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
1 2 3 4 5 6 7 Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. This transmitter has 20MHz, 40MHz and 80MHz bandwidth modes as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.73W/kg and 1.41W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
1 2 3 4 5 6 7 Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.40W/kg and 1.41W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
1 2 3 4 5 6 7 Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.03W/kg and 1.41W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
1 2 3 4 5 6 7 Is there an equipment authorization waiver associated with this application?No
1 2 3 4 5 6 7 If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?No
app s Test Firm Name and Contact Information
1 2 3 4 5 6 7 Firm Name DEKRA TESTING AND CERTIFICATION Lin Kou Lab.
1 2 3 4 5 6 7 Intel Corporation S.A.S.
1 2 3 4 5 6 7 Name V**** L********
1 2 3 4 5 6 7 N******** A********
1 2 3 4 5 6 7 Telephone Number 88628******** Extension:
1 2 3 4 5 6 7 00334********
1 2 3 4 5 6 7 Fax Number 88628********
1 2 3 4 5 6 7 00334********
1 2 3 4 5 6 7 E-mail v******@dekra.com
1 2 3 4 5 6 7 n******@intel.com
Equipment Specifications
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
1 1 15C CC 2402 2480 0.01
1 2 15C CC MO 2412 2472 0.984
1 3 15C CC MO 2422 2462 0.43
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
2 1 15E CC MO 5180 5240 0.191
2 2 15E CC MO 5190 5230 0.134
2 3 15E CC MO 5210 5210 0.062
2 4 15E CC MO ND 5260 5320 0.229
2 5 15E CC MO ND 5270 5310 0.11
2 6 15E CC MO ND 5290 5290 0.052
2 7 15E CC MO ND 5500 5700 0.198
2 8 15E CC MO ND 5510 5670 0.221
2 9 15E CC MO ND 5530 5690 0.232
2 1 15E CC MO 5745 5825 0.299
2 11 15E CC MO 5755 5795 0.198
2 12 15E CC MO 5775 5775 0.148
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
3 1 15C CC 2402.00000000 2480.00000000 0.0140000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
4 1 15E CC MO 5180 5240 0.191
4 2 15E CC MO 5190 5230 0.134
4 3 15E CC MO 5210 5210 0.062
4 4 15E CC MO ND 5260 5320 0.229
4 5 15E CC MO ND 5270 5310 0.11
4 6 15E CC MO ND 5290 5290 0.052
4 7 15E CC MO ND 5500 5700 0.198
4 8 15E CC MO ND 5510 5670 0.221
4 9 15E CC MO ND 5530 5690 0.232
4 1 15E CC MO 5745 5825 0.299
4 11 15E CC MO 5755 5795 0.198
4 12 15E CC MO 5775 5775 0.148
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
5 1 15C CC 2402 2480 0.01
5 2 15C CC MO 2412 2472 0.984
5 3 15C CC MO 2422 2462 0.43
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
6 1 15B CC
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
7 1 15C CC 2402.00000000 2480.00000000 0.0140000

 

some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details

 

  This product uses the FCC Data API but is not endorsed or certified by the FCC