Main Function Default mold Can use as default 15 colors change. Color Tuning by using dedicated App Can freely create lighting color Instruction Instruction Memory mode Can customize the lighting color types and order by selecting from the default 15 colors. 2 mermory pattern can be saved. (+ default pattern) Hot button Can always jump to your favorite color How to use the Default Mode (15 colors change) Pull to remove the plastic tab attached to the battery compartment ON : press the A button for 0.5 seconds, (With the penlight OFF, press and hold the A button, the rst color will light up.) OFF : press and hold the A button for 1.5 seconds. Color change : press the A button once, color will change forward press the B button once, color will change backward Color change order :
1.RED2.BLUE3.WHITE4.ORANGE5.GREEN6.PURPLE7.PINK8.YELLOW9.LIGHT GREEN 10.LIGHT BLUE11.LIGHT PINK12.VIOLET13.LIME14.TURQUOISE15.HOT PINK A button B button Setting for Memory Function (color types and order) Memory A 1.With the penlight o, press and hold the B button for 3 seconds until the RED color ashes slowly. 2. Press the A button to change the color sequentially. Change to the color you want and then press B button to select. The selected color will be ashing fast. You can select a specic order of colors. (Maximum memorable number of colors: 30) 3.After selecting all the colors, you must press and hold the B button until it turns o to save the memory. The switch ON/OFF is the same as default function after the memory function is set. After selecting the 30th color, the penlight will turn o and the color order will be saved automatically. Memory B 1.With the penlight o, press and hold both the A and B button for 3 seconds until the BLUE color ashes slowly. 2.Same as mermory A setting 2~3. Selecting for Memory Pattern After mermory A and mermory B have been saved, 1)default, 2)mermory A, 3)mermory B can be select and switch to use. Reseting for Memory
(1) With the penlight o, press and hold the B button for 3 seconds until the RED color ashes slowly.
(1) With the penlight o, press and hold the B button for 3 seconds until the RED color ashes slowly.
(2) Press C to select the mermory pattern select red color for mermory A select blue color for mermory B select white color for default mode
(3) After select either RED/BLUE/WHITE, press and hold B button for 3 seconds until it turns o to save the setting. The switch ON/OFF and color change is the same as default function after the memory function is set.
(2) Press C for selecting the mermory pattern to delete select red color for reseting mermory A select blue color for reseting mermory B
(3) Press and hold the A button for 3 seconds until the penlight turns o. The color order will be back to default setting. Even replaced the battery, the memory function setting is retained default mode (15 colors change) cannot be delete. How to use the Hot Button 1.Light up the favorite color, press and hold C button for 3 seconds, the penlight will ash once then setting have been saved. 2.While either one of the color is lighting, press C button then will jump to the favorite color. 3.while the favorite color is lighing up, press A or B button, the color will back to the color before pressing C button Hot Button
(C button) How to color tuning Connect to the penlight 1. Turn on the Bluetooth function from the device. 2. With the penlight o, press and hold both the A & B button for 3 seconds until the BLUE color ashes slowly. The penlight became tuning mode. 3. start up the App, touch pairingicon 4. select KBX5 5. The lighting color will be ashing fast. Pairing succeeded. Pairing requested at the rst time only. How to use the App App design might be modied A button B button 6. select the penlight model 7. Make your own blade or start with given default colors. Create your own blade by touching
"Create Blade" icon. 8. press "Create Color" to add the lighting color
(Maximum memorable number of colors: 30)) 9. select the base color for tuning Please choose the Memory type. Connect to:
Memory A Memory B 10. Control the red, green, blue, white color bar to adjust the RGBW value then touch Select Right side, there is a power consumption indicator which can give you a hint of battery duration of the current color. 11. touch install after nish color tuning 12. Select the mermory type for saving. The penlight will light up all colors then installed nished. FCC Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications (including the antennas) to this device that are not expressly approved by the manufacturer may void the user's authority to operate the equipment. FCC RF Radiation Exposure Statement:
This equipment complies with FCC RF Radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter.