Wireless Charger User Manual Product Diagram Compatible with all Qi-enabled mobile devices. Instructions 1.Connect the USB charge cable to USB wall adaptor(not included) or your computer. 2.Connect the USB cable to the micro USB port of the wireless charger. 3.Place charger on level surface with charging area face up(as shown) 4.Place your phone on the wireless charger.Make sure the phone is centered on the charging area. When the phone is being charged,the LED indicator will light up automatically to show status with different colors:
Red:Standby mode. Green:Fast charging,which requires both a 9V adaptor and 2A USB fast charging cable. Blue:Normal charging,or fully charged.
*Once temperature of battery becomes too high,charging speed will slow down, then color turns from green to blue. Package contents:
Wireless Charger USB Cable User Manual Product Specification Input:DC 5V/2.0A Output:5W/7.5W/10W(MAX) Conversion rate:72%
Transmission distance:8mm 9V/1.67A Attention:
1.Please keep the charger away from water or other liquid. 2.If you need to clean the charger,please make sure it is not connected power supply. 3.Use in environments where temperature is between 0-110. FCC Warning Statement Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.However, there is no guarantee that interference will not occur in a particular installation.If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and the receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.