Packing List Indicator Name Router Power Adapter Warranty Card User Manual Network Cable Quantity 1 1 1 1 1 Unit Set Piece Copy Copy Piece Appearance Reyee Mesh Indicator Reyee RG-E5 Wireless Router User Manual Reyee Mesh Indicator System Status Indicator Reyee Mesh Indicator Blinking The device is being paired. Green Steady on The device is paired and Wi-Fi signal is normal. Orange Steady on The device is paired but Wi-Fi signal is weak. System Status Indicator Steady on The device is running normally. Blue Red Steady on The device pairing is disconnected. Blinking Restoring the factory settings or restarting. Network Connection Scenario 1: Configure a single router
@Reyee-sXXXX
The router will match the Internet access
Configure the SSID and password. After the method. Please configure the network configuration working, you can connect to the parameters accordingly. SSID and access to the Internet.
Download the Reyee Router App System Status Indicator Reset Button LAN 1-4 Ports WAN Port WW
Please connect the power and network cables as shown below.
Register an account by one click d n a b d a I S P B r o Wi-Fi
@Reyee-sXXXX xxxxx-xxxxxxxx xxxxx-xxxxxxxx xxxxx-xxxxxxxx S/N:GXXXXXXXXXXXX MAC:XXXX XXXX XXXX MAC:XXXX XXXX XXXX
Login/Register
Tap Add Router and follow the guide for configuration Scan to Download Reyee Router App Add Router WAN Port (Yellow) if not, please visit 192.168.110.1.
Connect to the SSID @Reyee-sXXXX, and the configuration page will be displayed automatically;
Scenario 2: Reyee Mesh FAQs
Place the second router within 2 meters of the first one, and power it on.
What to do if I forget the management password?
After the system status indicator blinks in blue, wait for 2 to 3 minutes until it turns into steady blue. (If the router Try the Wi-Fi password which may be the same with the management password. If not, please restore had been configured before, please press the Reset Button for more than 3 seconds to restore the factory settings) the factory settings. Press the Reyee Mesh button on the first router.
How to restore the factory settings?
Press the Reyee Mesh button on the first router, and its indicator will blink in green during searching for routers. The Power on the router and wait for 2 to 3 minutes until it starts up. Press the Reset button for more than 3 indicator on the second router will also blink in green slowly during pairing . After 2 minutes, as the indicators on both seconds until the system status indicator blinks. After the indicator changes to steady on and the SSID routers turn into steady green, the pairing succeeds.
@ Reyee-sXXXX is broadcast, the router restores the factory settings successfully. Press the Reyee Button
(All devices within 2 meters)
Can I connect multiple routers with network cables?
2 with the LAN port (black) from master router for wired connection. Yes, and wired connection is more stable. You can connect the WAN port (yellow) from secondary device Modem 1 Federal Communications Commission Statement Dont need to press Reyee Mesh button on the second router
Place the second router to the specified position and power it on. After powering the router, wait for 3 to 5 minutes until the Reyee Mesh indicator turns into steady blue, it is all set and you can access the Internet. The meshed routers will share the same SSID and password. Visit 192.168.110.1 to check router connecting condition. If there is any network port available, you can connect cables as shown below. The wired connection is more stable. LAN Internet WAN This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. Please note that Wi-Fi signal may be weak if two routers are placed far from each other or there are several obstacles like wal ls RF Exposure Statement:
between them. The Internet speed may be slow if there are multiple paired routers. We recommended mesh-up within 5 routers (1+4) to keep good performance. This device complies with FCC radiation exposure limits set forth for an uncontrolled environment and it also complies with Part 15 of the FCC RF Rules. RF Exposure Warning!
This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Caution!
Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. IMPORTANT!
Operation in the band 5150-5250 MHz is only for indoor use. Innovation,Science and Economic Development Canada Statement This device complies with Industry Canadas licenceexempt RSSs. Operation is subject to the following two conditions:
(1) This device may not cause interference; and
(2) This device must accept any interference, undesired operation of the device. Le prsent appareil est conforme aux CNR dIndustrie Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :
(1) lappareil ne doit pas produire de brouillage;
(2) lutilisateur de lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. including interference that may cause Exposure Statement The device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS102 RF exposure, users can obtain Canadian information on RF exposure and compliance. Le dispositif rencontre l'exemption des limites courantes d'valuation dans la section 2.5 de RSS 102 et la conformit l'exposition de RSS 102 rf, utilisateurs peut obtenir l'information canadienne sur l'exposition et la conformit de rf. RF Exposure Warning!
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. Cet metteur ne doit pas tre Coplac ou ne fonctionnant en mme temps qu'aucune autre antenne ou metteur. Cet quipement devrait tre install et actionn avec une distance minimum de 20 centimtres entre le radiateur et votre corps. 5G UNII-1 Statement the maximum antenna gain permitted for the 1.The device for operation in the band 51505250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems;
2. For devices with detachable antenna(s), devices in the bands 5250-5350 MHz and 5470-5725 MHz shall be such that equipment still complies with the e.i.r.p. limit;
3. For devices with detachable antenna(s), the maximum antenna gain permitted for devices in the band 5725-5850 MHz shall be such that the equipment still complies with the e.i.r.p. limits specified for point-to-point and non-point-to-point operation as appropriate. 1.Les dispositifs fonctionnant dans la bande 5150-5250 MHz sont rservs uniquement pour une utilisation lintrieur afin de rduire les risques de brouillage prjudiciable aux systmes de satellites mobiles utilisant les mmes canaux;
2.Le gain maximal dantenne permis pour les dispositifs utilisant les bandes 5250-5350 MHz et 5470-5725 MHz doit se conformer la limite de p.i.r.e.;
3. Le gain maximal dantenne permis (pour les dispositifs utilisant la bande 5725-5825 MHz) doit se conformer la limite de p.i.r.e. spcifie pour lexploitation point point et non point point, selon le cas.