FCC ID: 2AX5J-EST310V2 Wireless Bridge

Safety Information 1 / English 2 / etina 3 / Dansk 4 / Nederlands 5 / Franais 6 / Deutsch 7 /

8 / Magyar 9 / Bahasa Indonesia 10 / Italiano 11 /

12 /

13 / Norsk 14 / Polski 15 / Portugus 16 / Romn 17 /

18 / Espaol 19 / Svenska 20 / Trke 21 /

22 / Ting Vit 23/

24/

25/

Safety Information Do not use your device if using the device is prohibited. Do not use the device if doing so causes danger or interference with other electronic devices. Do not attempt to disassemble, repair, or modify the device. If you need service, please contact us. Avoid dusty, damp, or dirty environments. Avoid magnetic fields. Using the device in these environments may result in circuit malfunctions. Ideal operating temperatures are 0 C to 40 C. Ideal storage temperatures are -40 C to +70 C. Extreme heat or cold may damage your device or accessories. For detailed device operation circumstance information, please refer to the user guide. The device should be installed and operated with a minimum distance of 20 cm between the radiator and your body. Using an unapproved or incompatible power adapter, charger, power cord, cable or battery may damage your device,

- 1 -

shorten its lifespan, or cause a fire, explosion, or other hazards. For pluggable devices, the socket-outlet shall be installed near the devices and shall be easily accessible. Adapter shall be installed near the equipment and shall be easily accessible. Do not touch the device or the charger with wet hands. Doing so may lead to short circuits, malfunctions, or electric shocks. Plug the product into the wall outlets with earthing connection through the power supply cord which provided by the manufacturer. Do not block any ventilation openings. Install this apparatus in accordance with the manufacturers instructions. Do not install this apparatus near any heat sources such as radiators, heat registers, stoves or other apparatus (including amplifiers) that produce heat. Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles and the point where they exit from the apparatus. Use only attachments/accessories specified by the manufacturer. Use only with the cart, stand, tripod, bracket or table specified by the manufacturer or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 1 / English 2 / etina 3 / Dansk 4 / Nederlands 5 / Franais 6 / Deutsch 7 /

8 / Magyar 9 / Italiano 10 / Norsk 11 / Polski 12 / Portugus 13 / Romn 14 / Espaol 15 / Svenska 16 / Trke EU declaration of conformity Ruijie Networks Co., Ltd. hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives 2014/53/EU, 2009/125/EC, 2011/65/EU and (EU)2015/863, and UK Radio Equipment Regulations. The original EU and UK declaration of conformity may be found at https://www.ruijienetworks.com/support

- 2 -

Restrictions in the 5 GHz band:

The 5150 to 5350 MHz frequency range is restricted to indoor use only in: AT, BE, BG, CH, CY, CZ, DE, DK, EE, EL, ES, FI, FR, HR, HU, IE, IS, IT, LI, LT, LU, LV, MT, NL, NO, PL, PT, RO, SE, SI, SK, TR, UK. Frequency Bands and Power The frequency bands and transmitting power (radiated and/or conducted) nominal limits applicable to this radio equipment are as follows: Wi-Fi 2400-2483.5MHz: 20 dBm, Wi-Fi 5G: 5150-5350 MHz: 23 dBm, 5470-5725 MHz: 30 dBm. Disposal and recycling information This product bears the selective sorting symbol for Waste electrical and electronic equipment (WEEE). This means that this product must be handled pursuant to European directive 2012/19/EU in order to be recycled or dismantled to minimize its impact on the environment. User has the choice to give his product to a competent recycling organization or to the retailer when he buys a new electrical or electronic equipment. For more information, please contact your local authorities, retailer, or household waste disposal service. This product is RoHS compliant. This product is in compliance with Directive 2011/65/EU and UK The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012, and its amendments, on the restriction of the use of certain hazardous substances in electrical and electronic equipment. CAUTION FCC AND IC STATEMENT FOR USERS Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. For a Class A digital device NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio

- 3 -

communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. CAN ICES-003(A)/NMB-003(A) For a Class B digital device:

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. CAN ICES-003(B)/NMB-003(B) For Products That Transmit RF Energy:

(i) FCC AND IC INFORMATION FOR USERS This device complies with Part 15 of the FCC rules and contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. For radio equipment operates in 5150-5850MHz FCC Caution:

High power radars are allocated as primary users of the 5.25 to 5.35 GHz and 5.65 to 5.85 GHz bands. These radar stations can cause interference with and/or damage to LE LAN (License Exempt Local Area Network) devices. No configuration controls are provided for this wireless equipment allowing any change in the frequency of operations outside the FCC grant of authorization for US operation according to Part 15.407 of the FCC rules. IC Caution:

User should also be advised that: (i) The device for operation in the band 5150 - 5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems; (ii) the maximum antenna gain permitted for devices in the bands 5250 - 5350 MHz and 5470 - 5725 MHz shall comply with the e.i.r.p. limit: and (ii) The maximum antenna gain permitted for devices in the band 5725 - 5825 MHz shall comply with the e.i.r.p. limits specified for point-to-

point and non point-to-point operation as appropriate.

- 4 -

Este equipamento no tem direito proteo contra interferncia prejudicial e no pode causar interferncia em sistemas devidamente autorizados. Este produto est homologado pela ANATEL, de acordo com os procedimentos regulamentados pela Resoluo 242/2000, e atende aos requisitos tcnicos aplicados. Para maiores informaes, consulte o site da ANATEL www.anatel.gov.br IFETEL NOTICE :

La operacin de este equipo est sujeta a las siguientes dos condiciones: (1) es posible que este equipo o dispositivo no cause interferencia perjudicial y (2) este equipo o dispositivo debe aceptar cualquier interferencia, incluyendo la que pueda causar su operacin no deseada. This equipment complies with FCC and ISED radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. Cet quipement est conforme aux limitations prvues par FCC et ISED pour lexposition aux radiations dans le cadre dun environnement non contrl. Cet quipement devrait tre install et actionn avec une distance minimum de 20 centimtres entre le radiateur et votre corps.

- 5 -

Product Manual Hng dn s dng sn phm Buku Panduan Produkthandbuch Manuel du produit Manual del producto rn El Kitab 7 148 15 21 22 28 29 35 36 42 43 49 50 56 57 63 64 70 4. 5. 2-3 2-4 6 2-5 7 8 9 10 11 12 13 14 15 16

General You can get IP settings assigned automatically if your network supports this capability. Otherwise, you need to ask your network administrator for the appropriate IP settings. O Obtain an IP address automatically Use the following IP address:

IP address: 10 . 44. 77 . 100 Subnet mask: 255 .255 .255. 0 Default gateway: 10.44.77 254 Obtain DNS server address automatically

@ Use the following DNS server addresses:

Preferred DNS server: I Alternative DNS server:

Validate settings upon exit VCR (AP) & Pair Again Note

@ You can reset the device to restore default pairing status. Country/Region: United States (US) Pairing Status: Default Work Mode: VCR (AP) WDS SSID: @Ruijie-wds-7749 Custom:

1. Support one-to-many (one AP to many CPEs). 2. Replace the paired device. Country/Region The country/region you select here must be the same as the country/region of the WDS network. Country/Region: United States (US) Previous Mode Switchover Work Mode: VCR (AP) Previous WDS SSID Scan and select WDS SSID or enter WDS SSID.

*WDS SSID: [| wosssiD | Scan |

Setup WDS SSID: @Ruijie-wds-6cc1 General You can get IP settings assigned automatically if your network supports this capability. Otherwise, you need to ask your network administrator for the appropriate IP settings. O Obtain an IP address automatically Use the following IP address:

IP address: 10 . 44. 77 . 100 Subnet mask: 255 .255 .255. 0 Default gateway: 10.44.77 254 Obtain DNS server address automatically

@ Use the following DNS server addresses:

Preferred DNS server: I Alternative DNS server:

Validate settings upon exit VCR (AP) & Pair Again Note

@ You can reset the device to restore default pairing status. Country/Region: United States (US) Pairing Status: Default Work Mode: VCR (AP) WDS SSID: @Ruijie-wds-7749 Custom:

1. Support one-to-many (one AP to many CPEs). 2. Replace the paired device. Country/Region The country/region you select here must be the same as the country/region of the WDS network. Country/Region: United States (US) Previous Mode Switchover Work Mode: VCR (AP) Previous WDS SSID Scan and select WDS SSID or enter WDS SSID.

*WDS SSID: [| wosssiD | Scan |

Setup WDS SSID: @Ruijie-wds-6cc1 General You can get IP settings assigned automatically if your network supports this capability. Otherwise, you need to ask your network administrator for the appropriate IP settings. O Obtain an IP address automatically Use the following IP address:

IP address: 10 . 44. 77 . 100 Subnet mask: 255 .255 .255. 0 Default gateway: 10.44.77 254 Obtain DNS server address automatically

@ Use the following DNS server addresses:

Preferred DNS server: I Alternative DNS server:

Validate settings upon exit VCR (AP) & Pair Again Country/Region The country/region you select here must be the same as the country/region of the WDS network. Country/Region: United States (US) Previous Note

@ You can reset the device to restore default pairing status. Country/Region: United States (US) Pairing Status: Default Work Mode: VCR (AP) WDS SSID: @Ruijie-wds-7749 Custom:

1. Support one-to-many (one AP to many CPEs). 2. Replace the paired device.

Mode Switchover Work Mode: VCR (AP) Previous WDS SSID Scan and select WDS SSID or enter WDS SSID.

*WDS SSID: [| wosssiD | Scan |

Setup WDS SSID: @Ruijie-wds-6cc1 Abad sd ceil acall Claas lusty) as JAY 3 yetueAll Ag pill Atlin yy jleall da eek QO)O PReN| -

Umaliill ye 4 jl Ruijie eb) Laid Sleall le 35100 WSP-EST310 Glee: Cadi AAS Ashi!) Lita y 1 RG-EST310 |S 1 RG-EST310 sss) Jguus Gb 2 od 0.5 / 18 24 PoE 4ilb OY ja0 4 Syl G1 5S 4 2 Con) Cais 4 (ST4.2%19) 4a lll 43 Cel 4 Olaed: Gt chlse 1 Gaal) 4aUy 1 axel Jett) Jule 2 4aUb)) Gila 1 a Jazall spill Jauve C4 pb 4s La

| pall) a sla (cg Ugial) inal! | ypalsl Sills LED I yb 50 LED Gl ij Caray 1 aUaill LED 5 .a deal ned poe easl aes Aagrce 8 yer der: Sigal cut jas LAN 48:41 LED 5450 .b nais JS aa gs y rlibs Ugliiog g) Glial hab adiall Sled Lusi! aa gs: pad! Garey alll ada Yooh hg Y Saball JLed JLoat} an gs eu peas 3 LEN LED 450 .c BLS) ogi GLENS! ayy -Laba Adsae BLEY) tyes LED i) pipe Cpe ay jal clued 63 LAY! 8.68 Gala! Lal :cuti Sul U5 Oil 96 12 Able Adie 2 02 5.5 ise JIS) ball ae 2.1 2 Adal bill LAN/POE 8s .3 LAN/PoE sis

(7/6/5 all Gye SIS) 2 100 :POE Mid 4ilie rai LAN/POE Asis

(7/6/5 =Uall G0 JS) se 100 :POE Sid Ailine nal cine le Cus Sa ARES jae yaad glall GySahiall ys yes Gyacadll cle alSal Guill das AS uth! dads Qle jell ad, bo Aailal! le alSaly cuutill aus G4 al) das le jlgall a8 2 Laila) fe cayts ces all a 5 ui IA) Aaagill Gyo ay all (ol) Aaa! Os es) A Ashu css all Ly 3 jee) aadtiad be 832) oe US asd edly Gal tal gf ga pall Lh jen! aol 2) Gl) daly Hel) QS BIg Gnbill

(Le mass) Gebill pe 3)

-Ruijie Cloud G55 J: ji teal le si Utall le & stadll QR joy Wipe canal 1 Wireless Bridge < Ge! CS! lel 825 sall < (& 5 44) +Project ) Jit! 3 heal Bylay (SLD (ls yall Le I) cig! sc bly

(43 eige) SLY gall rei a!) cola pall Las ll jleas Galalls 5G Audis (SSID) Giles de pane a jad: act! 1 ce all Aas yi OA) Ge Xxxx GyaY jit Gus Ruijie-bxxxx. xxxx@ 12!

(MAC olsic ab scl giall Las yd (gd fnttp://192.168.120.1 Lil Ja Sai 25 qinae BU eitl 2 Enter le bao!

LyStan J gall Sarat Aly Gall! i gueSll gle IP Ul sic anol .1 10.44.77.100: (IP ols) IP Address 255.255.255.0 :(Ae ill 45.3) 8) Subnet Mask 10.44.77.254 :(4\ 51!) Gateway General You can get IP settings assigned automatically if your network supports this capability. Otherwise, you need to ask your network administrator for the appropriate IP settings. Obtain an IP address automatically

@ Use the following IP address:

IP address: 10 . 44 . 77 .100 Subnet mask: 255 .255 .255. 0 Default gateway: 10.44.77 .2A Obtain DNS server address automatically 4 -4 is ay

@ Use the following DNS server addresses:

Preferred DNS server:

Alternative DNS server:

Validate settings upon exit cle Lia! 65 oy) siall Ld 4 http:// 10.44.77.254 dsei ob cqinatie BL ill 2 Enter B5ga) AS game ool! Spe Ge Glalacy!

coil) ple yall ysl Sigs shi8!

Alsi by gaa I gla yall Lay I Glee GS gansh Le cel ial HH pls pall Ley ll Sige JUGS!

etd eb cata) pl pall Las ll Slee 9S (ipalS 5i sped Sauwe GIS el pus) 58 Slee Gl is!

el) la yall Lay) lg Aig Agltal) Gil ghastt Gott pla pall Lt) Sige dings argll ne Bla) Andee le J gdall Jas 4 CAN! shall OS sl (64 (ISaee GLY!) Pair Again J! .2 VCR (AP) & Pair Again 1-2 Sul ;

(Ja!) Start 358 54.3 Note

@ You can reset the device to restore default pairing status. Country/Region: United States (US) Pairing Status: Default Work Mode: VCR (AP) WDS SSID: @Ruijie-wds-7749 Custom:

1. Support one-to-many (one AP to many CPEs). 2. Replace the paired device. 2-2 JSall Note

@ You can reset the device to restore default pairing status. Country/Region: United States (US) Pairing Status: Default Work Mode: VCR (AP) WDS SSID: @Ruijie-wds-7749 Custom:

1. Support one-to-many (one AP to many CPEs). 2. Replace the paired device.

(AGN) Next G8 ail ob Alaawilh Leith Gyo al) si all 8 4 Country/Region The country/region you select here must be the same as the country/region of the WDS network. Country/Region: | United States (US) Previous |

3-2 JSal

(still) Next G8 58) ai ((CPE) |S!) Camera (CPE) 48! .5 Mode Switchover Work Mode: VCR (AP) Previous 4-2 JSall Lalill Go (SSID) Glesall de sone Gd jes aah idly (Se) Scan Gs I 6 JA) C= XXXX 385 Cus <Ruijie-wds-xxxx :JSie) 3 ple 2 yatll da} 5} Alaacall

(MAX o} sic Ge Aly! 4a) WDS SSID Scan and select WDS SSID or enter WDS SSID.

*WDS SSID: | wosssiD Scan |

5-2 JSall

(Ju!) Submit G34 58) .7 Setup WDS SSID: @Ruijie-wds-6cc1 6-2 JS)

| pall) UT LED bps eg: Leis LG gtsill due Sea AILI LED 385 Us .8 38 0.5 Ae aw AGL! Ol gal) GIS IS Ga Bate |adlS Glas 5 dle) 4 cue 9 14) ba, cs Bll on Gilye gl asa pte Ue SU Ga 1 BN gall ELE) ye led ELE! cle jg! Gants yo Stall Coe ail ge gi alia Gals 13) 2 Gal 5 ol) 3 Atlas alas aladtay 8 LEY! 1 Si gla ash pladtuly uel Lild cLiSes gil gall sald OS al 14) 3 gettiall Jai (WDS) (SLdU a2 5 sil Cos AiLwall peal 5 LEY) 1 9S gle ani pladils eucid log ab gl dlual Guba! Jal 4 JIA (5 giae Gynt y cy its oy Slee US J SUIS ua gt coals edge (4 8 plaliiall 48 pl) Glas sll, Adil pall 3 jgal JS i ale 5 BeldSll Gnd g Aas) addi 3 jen) Go Ae gona jlea La ) Jo 2 5 slat Ag phall 5 jel Oy Adluall of ye Sill Lo 3! 6

| alSl) Allal LED 5550 Gey Loy HG gall Jairo See Alle LED bss Us .7 5 0.5 4c an Le MSL; cenit IAD Addseall iy 8 goal oll 3 Lh) Cle Gy gilll 8 ileal Ida Gut, 8 ty Al) 13a Gye all Gals Oe a 5h General You can get IP settings assigned automatically if your network supports this capability. Otherwise, you need to ask your network administrator for the appropriate IP settings. O Obtain an IP address automatically Use the following IP address:

P address: 10 . 44. 77 . 100 Subnet mask: 255 .255 .255.. 0 Default gateway: 10.4 .77 .254 Obtain DNS server address automatically

@ Use the following DNS server addresses:

Preferred DNS server: |

Alternative DNS server:

Validate settings upon exit VCR (AP) & Pair Again Note

@ You can reset the device to restore default pairing status. Country/Region: United States (US) Pairing Status: Default Work Mode: VCR (AP) WDS SSID: @Ruijie-wds-7749 Custom:

1. Support one-to-many (one AP to many CPEs). 2. Replace the paired device. Country/Region The country/region you select here must be the same as the country/region of the WDS network. Country/Region: United States (US) Previous Mode Switchover Work Mode: VCR (AP) Previous WDS SSID Scan and select WDS SSID or enter WDS SSID.

*WDS SSID: [| wosssiD | Scan |

Setup WDS SSID: @Ruijie-wds-6cc1

General You can get IP settings assigned automatically if your network supports this capability. Otherwise, you need to ask your network administrator for the appropriate IP settings. O Obtain an IP address automatically Use the following IP address:

IP address: 10 . 44. 77 . 100 Subnet mask: 255 .255 .255. 0 Default gateway: 10.44.77 254 Obtain DNS server address automatically

@ Use the following DNS server addresses:

Preferred DNS server: I Alternative DNS server:

Validate settings upon exit VCR (AP) & Pair Again Note

@ You can reset the device to restore default pairing status. Country/Region: United States (US) Pairing Status: Default Work Mode: VCR (AP) WDS SSID: @Ruijie-wds-7749 Custom:

1. Support one-to-many (one AP to many CPEs). 2. Replace the paired device. Country/Region The country/region you select here must be the same as the country/region of the WDS network. Country/Region: United States (US) Previous Mode Switchover Work Mode: VCR (AP) Previous WDS SSID Scan and select WDS SSID or enter WDS SSID.

*WDS SSID: [| wosssiD | Scan |

Setup WDS SSID: @Ruijie-wds-6cc1 General You can get IP settings assigned automatically if your network supports this capability. Otherwise, you need to ask your network administrator for the appropriate IP settings. O Obtain an IP address automatically Use the following IP address:

IP address: 10 . 44. 77 . 100 Subnet mask: 255 .255 .255. 0 Default gateway: 10.44.77 254 Obtain DNS server address automatically

@ Use the following DNS server addresses:

Preferred DNS server: I Alternative DNS server:

Validate settings upon exit VCR (AP) & Pair Again Note

@ You can reset the device to restore default pairing status. Country/Region: United States (US) Pairing Status: Default Work Mode: VCR (AP) WDS SSID: @Ruijie-wds-7749 Custom:

1. Support one-to-many (one AP to many CPEs). 2. Replace the paired device. Country/Region The country/region you select here must be the same as the country/region of the WDS network. Country/Region: | United States (US)

| Previous Mode Switchover Work Mode: VCR (AP) Previous WDS SSID Scan and select WDS SSID or enter WDS SSID.

*WDS SSID: [| wosssiD | Scan |

Setup WDS SSID: @Ruijie-wds-6cc1 General You can get IP settings assigned automatically if your network supports this capability. Otherwise, you need to ask your network administrator for the appropriate IP settings. O Obtain an IP address automatically Use the following IP address:

IP address: 10 . 44. 77 . 100 Subnet mask: 255 .255 .255. 0 Default gateway: 10.44.77 254 Obtain DNS server address automatically

@ Use the following DNS server addresses:

Preferred DNS server: I Alternative DNS server:

Validate settings upon exit

Rue Reyee ) Wireless Bridge Model: RG-| _* oe Version: V1.00 Technical sport enna https://www.ruijienetworks.com/support Ruijie Networks Co., Ltd MADE IN CHINA FCC ID: 2AX5J-EST310V2 IC: 27676-EST310V2 This device complies with Part 15 of the FCC rules and contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause harmful interference, . ve and (2) this device must accept any interference received, including interference that may cause undesired opration. CAN ICES-003(B)/NMB-003(B)

Ruijie Networks Co., Ltd. Declaration letter Date: 2022-12-23 We, the undersigned company Company name: Ruijie Networks Co., Ltd. Address: Building 19, Juyuanzhou Industrial Park, No. 618 Jinshan Road, Cangshan District, Fuzhou, Fujian 350002, China Declare that:

Product description: Wireless Bridge Model: RG-EST310 V2 FCC ID: 2AX5J-EST310V2 This device with Bridge mode of Operation is permitted to operate in the DFS band and employ a DFS function. The functionality of the Bridge mode as specified in 15.403(a) is validated in the DFS test report by performing a test Statistical performance check on any one of the radar types. If you have any questions regarding the authorization, please do not hesitate to contact us, thank you. Yours sincerely, Signature:

Name: Chao Jiang Tel: +86 13705060310 Email: jiangchao@ruijie.com.cn 1/1

CONFIDENTIALITY REQUEST for Certification Service in USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048

<12/14/2022>

TO WHOM IT MAY CONCERN Pursuant to Paragraphs 0.457 and 0.459 of the Commissions Rules (47 C.F.R.) and Section 552(b) (4) of the Freedom of Information Act, we request confidentiality for the following products:

FCC ID: 2AX5J-EST310V2 Model name: RG-EST310 V2 For the product stated above, we request that the following information be held confidential;

Exhibits Long-Term Confidentiality Short-Term Confidentiality External Photos Internal Photos Block Diagram Schematics Test Setup Photos Users Manual Parts List Tune Up Operational Descriptions Short-Term Confidentiality Days 180 days 180 days 180 days 180 days The long-term confidentiality exhibits contain our trade secrets and proprietary information that could be of benefit to our competitors. The short-term confidentiality on the basis of ensuring that business sensitive information remains confidential until the actual marketing of our new device. If you have any questions, please feel free to contact me at the address shown below. Sincerely,

(Signed) Name: Chao Jiang Company: Ruijie Networks Co., Ltd. Address: Building 19, Juyuanzhou Industrial Park, No. 618 Jinshan Road, Cangshan District, Fuzhou, Fujian 350002, China Phone: +86 13705060310 Fax: +86 591 28053888 E-Mail: jiangchao@ruijie.com.cn