Specifications RHF2S024 Home LoRaWAN Gateway Specifications V0.4 Document information Info Keywords Content Abstract RisingHF, LoRaWAN, IOT, Gateway, specifications This document describes the specifications of the Home RHF2S024 Specifications 1. Preface This document describes the technical specifications and features of the home gateway RHF2S024. RHF2S024 is an 8 channels Smart Home Gateway device designed by Friendcom, which is compatible with LoRaWAN protocol and WiFi IEEE 802.11b/g/n.It can also be used as a WiFi router. 2. RHF2S024 LoRaWAN Gateway description RHF2S024 is an IOT gateway based on LoRaWAN and target to LPWAN network. The GW could support LoRaWAN Class A/C protocol and WiFi IEEE 802.11.b/g/n standard. The 2.4G wireless transmission rate up to 150Mbps. Users could connect the GW to Cloud server via WiFi. This device integrate an high performance CPU MT7688, one pcs of base-band processor SX1301, that it could support 8 multi-SF channel (SF12 to SF7), 1 single-SF channel and 1 GFSK channel. Output power could achieve to 13dBm max. Sensitivity is as low as -142dBm@300bps. With specified payload length and transmit period, one GW could support 10k nodes. RHF2S024 is a smart, easy installation and high reliability device. Customers could setup a quick LoRaWAN network for their LPWAN application with RHF2S024. 2.1.Functional Block RHF2S024 functional block is shown below. Figure 2- 1 RHF2S024 functional block V0.4 2017-08-25 www.risinghf.com 1 Specifications 2.2.Product features and application Features LoRaWAN half-duplex operation mode;
Include 8 multi-SF LoRa channel, 1 single-
SF LoRa channel, and 1 GFSK channel;
Output power achieve to 3dBm max Industry 4.0Industrial monitor Wireless remote control and monitor Smart Home, Smart building, Smart community and Smart city;
Wireless alarm and security environment monitor receiver sensitivity as low as
-142dBm@300bps;
Support LoRaWAN ClassA/C mode;
Support802.11b/g/n;
Support10base-Tand100base-TX;
Support100mEthernetcable;
Application M2MIOT and LPWAN Wireless sensor network AMR 2.3. Specifications Table 2- 1 RHF2S024 Specifications Item Group Item Description System Configuration Core MIPS24KEc Basic Frequency 580MHZ RAM Flash 1G-bit 256M-bit 10M/100Mbps Interface Access internet via cable Communication 2.412-2.462G WIFI Wireless access LoRa 915MHz V0.4 2017-08-25 www.risinghf.com 2 Specifications Wireless coverage WIFI LoRa 60M(Open Space) 3km(city environment) Power supply input DC 12V Average Power Consumption
<5W Electrical Specification 2.4G WIFI Output Power 2.4G WIFI Sensitivity 11n HT20: 152dBm 11n HT40: 162dBm 11g: 152dBm 11b: 132dBm 11n HT20 MCS7 150Mbps: -68dBm@10%PER 11g 54Mbps: -68dBm@10%PER 11b 11Mbps: -85dBm@8%PER LoRa Output Power 21dBm LoRa Sensitivity
-142dBm@SF12,BW=125kHz POWER LED Power access indication SYSTEM LED System status indication LED WIFI LED WIFI link status indication LoRa LED LoRa link status indication USB LED USB link status indication V0.4 2017-08-25 www.risinghf.com 2 Specifications RJ45 LED RJ45 link status indication RJ45 WAN/LAN Automatic switching between different modes USB2.0 Local firmware upgrade and data download External Interface WIFI antenna 5dBi External antenna LoRa antenna 0dBi External antenna Power interface 12V/1.5A Power supply input Dimensions 166*105*28.4mm Dimensions Installation Weight 223.2g Installation On the desktop or Fixed on the wall Operating Range Operational temperature range Storage temperature range
-20 to +50
-40 to +85 3. Global electrical specifications and reliability 3.1.Electrical specifications 3.1.1. Power Supply RHF2S024 is equipped with 12V / 1.5 A 5 energy efficiency power adapter, input voltage range of 100 ~ 240Vac; 50/60Hz, output voltage range 11.4 ~ 12.6 V. V0.4 2017-08-25 www.risinghf.com 3 Specifications 3.1.2. Consumption Table 3- 1 RHF2S024 Total Consumption Item Standby Average MAX Value typ/W 2.4W 4.1W 5W 3.1.3. Rf SpecificationsLoRaWAN Conducted Receiver sensitivity and Transmitter output power would be used to evaluate the performance here. 1Sensitivity Test condition32byte payloadPER=10% +25. Table 3- 2 Conducted Receiver sensitivity Bandwidth/kHz Spreading Factor Sensitivity/dBm Part Number RHF2S024 125 250 500 12 7 12 7 12 7 125 Table 3- 3 Output power 12 7 12 Min 902.5 902.5 7 2Output power Test conditionCW signal+25. Part Number RHF2S024-868 RHF2S024 Parameter 250 Frequency RangeTx Frequency RangeRx 500 Max Output power RHF2S024-915 125 250 500 12 7 12 7 12 7 V0.4 2017-08-25 www.risinghf.com Max 927.5 927.5 Typ 2
-140
-125
-136
-122
-133
-119
-139
-125
-136
-122
-133
-119
-139
-125
-136
-122
-133
-119 Unit MHz MHz dBm 4 Specifications 3.1.4. Antenna performance The gateway is equipped with an high efficient omnidirectional antenna. Resistance 50 VSWR<3.0@470-510MHZ VSWR<2.0@868-915MHZ VSWR<1.8@2.4-2.5GHZ Gain 0dBi@470-510MHZ 0dBi@868-915MHZ 5dBi@2.4-2.5GHZ Efficiency 470-510MHZ:>35%
868-915MHZ>60%
2.4-2.5GHZ:>60%
V0.4 2017-08-25 www.risinghf.com 5 Specifications 3.2.Reliability Environment test Item Low temperature operation High temperature operation Low temperature Storage High temperature Storage Table 3- 7 Environment test requirement Test condition Temperature: 20C Operation mode: working with service connected Test duration: 12 h Temperature: +50C Operation mode: working with service connected Test duration: 12 h Temperature: 40C Operation mode: no power, no package Test duration: 24 h Temperature: +85C Operation mode: no power, no package Test duration: 24 h standard JESD22-A1 GB/T 2423 JESD22-A1 GB/T 2423 JESD22-A1 GB/T 2423 JESD22-A1 GB/T 2423 results Appearance ok;
LoRaWAN RF Performance ok;
Function ok;
Appearance ok;
LoRaWAN RF Performance ok;
Function ok;
Appearance ok;
LoRaWAN RF Performance ok;
Function ok;
Appearance ok;
LoRaWAN RF Performance ok;
Function ok;
V0.4 2017-08-25 www.risinghf.com 7 4. Mechanical size and package information 4.1.Mechanical size Specifications Figure 4-1 RHF2S024 Mechanical size 4.2.package information 4.2.1. Package list Material PN Table 4- 1 package list RHF2S024 Adapter RHF2S024-xxx 12/1.5A Qty 1 1 V0.4 2017-08-25 www.risinghf.com 9 4.3.Order information RHF2S024 include several part number, different part number would be used in different band and area, please contact with sales@risinghf.com for detailed information. Specifications PN RHF2S024 RHF2S024-868 RHF2S024-915 Table 4- 2 order information descriptions 902.5-927.5MHz 859-871MHz 900-930MHz FCC Warning This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any inte rference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device , pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interferenceto radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. V0.4 2017-08-25 www.risinghf.com 11 Modifications Specifications
+ Add EU868/IN865/US915/AU915/AS923 Specification parameters and ordering information
+ Update with some error modifications V0.4 2017-08-25 V0.3 2017-08-07
+ Add Package information
+ Add Power consumption parameters V0.2 2017-08-04 V0.1 2017-06-20
+ Create draft. V0.4 2017-08-25 www.risinghf.com 12 Specifications Information in this document is provided solely in connection with RisingHF products. RisingHF reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. Please Read Carefully:
All RisingHF products are sold pursuant to RisingHFs terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the RisingHF products and services described herein, and RisingHF assumes no liability whatsoever relating to the choice, selection or use of the RisingHF products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by RisingHF for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN RISINGHFS TERMS AND CONDITIONS OF SALE RisingHF DISCLAIMS ANY EXPRESS OR IMPLIEDWARRANTY WITH RESPECT TO THE USE AND/OR SALE OF RisingHF PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIEDWARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWSOF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. RISINGHF PRODUCTS ARE NOT DESIGNED OR AUTHORIZED FOR USE IN: (A) SAFETY CRITICAL APPLICATIONS SUCH AS LIFE SUPPORTING, ACTIVE IMPLANTED DEVICES OR SYSTEMS WITH PRODUCT FUNCTIONAL SAFETY REQUIREMENTS; (B) AERONAUTIC APPLICATIONS; (C) AUTOMOTIVE APPLICATIONS OR ENVIRONMENTS, AND/OR (D) AEROSPACE APPLICATIONS OR ENVIRONMENTS. WHERE RISINGHF PRODUCTS ARE NOT DESIGNED FOR SUCH USE, THE PURCHASER SHALL USE PRODUCTS AT PURCHASERS SOLE RISK, EVEN IF RISINGHF HAS BEEN INFORMED IN WRITING OF SUCH USAGE, UNLESS A PRODUCT IS EXPRESSLY DESIGNATED BY RISINGHF AS BEING INTENDED FOR AUTOMOTIVE, AUTOMOTIVE SAFETY OR MEDICAL INDUSTRY DOMAINS ACCORDING TO RISINGHF PRODUCT DESIGN SPECIFICATIONS. PRODUCTS FORMALLY ESCC, QML OR JAN QUALIFIED ARE DEEMED SUITABLE FOR USE IN AEROSPACE BY THE CORRESPONDING GOVERNMENTAL AGENCY. Resale of RisingHF products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by RisingHF for the RisingHF product or service described herein and shall not create or extend in any manner whatsoever, any liability of RisingHF. RisingHF and the RisingHF logo are trademarks or registered trademarks of RisingHF in various countries. Information in this document supersedes and replaces all information previously supplied. The RisingHF logo is a registered trademark of RisingHF. All other names are the property of their respective owners. 2015 RISINGHF - All rights reserved http://www.risinghf.com V0.4 2017-08-25 www.risinghf.com 13