ruwido austria Gmbh Kstendorfer Strae 8 A-5202 Neumarkt a.W. Austria Telephone: +43(0)6216-4571 www.ruwido.com DAIMLER REMOTE CONTROL USER MANUAL Model 2738-xxx Documentstatus: Open Editor: Thomas Fischer Document Title:
Daimler Remote Control User Manual 28.08.2011 i. Revision Status Date 20.08.2012 Author Th. Fischer Comment Created Version 1.0 ruwido austria GmbH UserManual.doc 2/4 Document Title:
Daimler Remote Control User Manual 28.08.2011 1 Table of Contents i. Revision Status ................................................................................................................................ 2 1 Table of contents .............................................................................................................................. 3 2 About this document ......................................................................................................................... 4 3 Startup .............................................................................................................................................. 4 4 Association ....................................................................................................................................... 4 5 Transmitting data .............................................................................................................................. 4 ruwido austria GmbH UserManual.doc 3/4 Document Title:
Daimler Remote Control User Manual 28.08.2011 2 About this document The following document describes the use of the remote control model 2738. 3 Startup The remote control is battery operated. Please insert two fresh AAA batteries in the battery compartment on the back side of the remote. The indication LED above the mode wheel indicates the battery status after each button press. If the LED blinks red after a button press the batteries should be replaced. 4 Association To associate the remote with the receiving unit the buttons ON and # should be pressed simultaneously while the receiving unit is also in association mode. The indication LED blinks red during the association process and then blinks green when the association has finished successfully. If the association is not successful after 30 sec. the association process stops and the red indication LED stops blinking. 5 Transmitting data After the association process has finished successfully the remote control send data after each button press and while turning the navigation wheel. A successful transmission is indicated by the green indication LED. An unsuccessful transmission is indicated by the orange indication LED. Turning the mode wheel changes the mode in which the remote works; it does not send any data. ruwido austria GmbH UserManual.doc 4/4