Sabine-M700 SOLO KTV K iOS &Android APP Sabine-M700*1
*1
*1
*1
*1 1 Sabine-M700 K iOS &Android APP 1 a) ON/LED b) LED 2 a) 2 b) c) 2 d) e) 3 a) b) 2 REC) c 4 a) LEDAPP
(//) b) LED5 c) APPLED APP(//) d) APPLED5 5 a) b) 6 2/
3 REC) 1.USB 2. 4 1 a) M700 1 b) M7003LED
(//) c) Sabine M700 LED5 Sabine M700 2 3LED
[+ +(//) + ] LED 5 3 M700 5 1.;
2.;
3.;
4.;
5.;
6.;
7.;
8. 6 NCC
7 8 9 Sabine-M700 SOLO KTV Wireless bluetooth karaoke headset iOS &Android APP Packing List Sabine-M700*1 Charging Cable*1 Microphone rod*1 Pouch*1 Sabine-M700 Wireless bluetooth karaoke headset iOS &Android APP Manual*1 1 Specification 1On/off a) Before powering on headset, please make sure the slider switch is in the ON position. Press and hold the MFB button for three seconds until the blue led on for 1 sencond. Then the device will enter reconnecting/paring mode while blue led blinking. b) Press the MFB for three seconds to power off device. While LED light is off with the voice the device has been switched off . 2 Call a)Single click the MFB to answer incoming all and press&hold for 2 seconds to reject incoming call. b) Double-click the "multi-function" button to answer the third partys incoming call, and the other partys call will be held;
c) Press&hold the MFB for 2 seconds to reject the third party incoming call. d) Single click the MFB to hang up the current call and answer the third party incoming call. 2 Record Button REC) Next Song Physical Buttons Last Song Multifunctional press key Specification e) Double-click the "multi-function" button to hold the third partys call andreactive the former call.. 3Music play a) Single press the MFB to play/pause music. b) Press "<" for skip forward, and ">" for the skip backward;
cLong press "<" for volume up, and ">" for volume down (only applicable to non-inserted external microphone accessory);
4Record a) Single click the RECORD to start audio recording with APP. LED flashing patterns flashing/breathing/off can be set in APP. b) Single click the RECORD to stop audio recording. Headset will enter standby mode while the blue led flashing once every 5 seconds. 3 Record Button REC) Next Song Physical Buttons Last Song Multifunctional press key Equipment specification c) Single click the RECORD to start video recording with APP. LED flashing patterns flashing/breathing/off can be set in APP. d) Single click the RECORD to stop recording. Headset will enter standby mode while the blue led flashing once every 5 seconds. 5 Transfer(Original/ Backup) a) Doule-click the MFB to enable/disable de-vocal mode (the original voice will be removed in music track). b) Doule-click the MFB to enable/disable de-vocal mode (the original voice will be removed in music track). 6 Change Sound Effect Press&hold RECORD for 2 seconds to change the effects between original-effect/female-voice/male-voice/baby-voice/elec-voice/robot-voice. 4 Record Button REC) Next Song Physical Buttons Last Song Multifunctional press key Charging 1Please charge with the Micro-USB cable;
2While charging, the red LED light constantly. When charging is completed, the LED turns off. 5 Bluetooth connection 1 First Pair a) Put the mobile phone within 1 meter aound the M700. b) Press the "multi-function" button for 3 seconds to turn on the device, and the blue light flashes with voice Device started, please wait for connection, battery level high/medium/low *]
c) Open the mobile phone blutooth setting, search for "Sabine M700", and click it to connect. The blue led will flash once every 5 seconds if connected successfully. 2 Automatic re-connection (applicable to paired devices) Press the "multi-function" button for 3 seconds to turn on the device, and the blue light flashes with the voice power on, waiting for bluetooth connection , battery level condition.. connected], athen the blue light will flash ed every 5 seconds;
Bluetooth Bluetooth Equipment Sabine M700 3 Please retry powering off/powering-on the heaset after paring failed. Paring steps are the same as above related instructions. 6 Caution 7 FCC warning Message Any Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is 8 FCC warning Message encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. FCC ID: 2AK54-SABINE-M700 9 10 Sabine-M700 SOLO KTV K iOS &Android APP Sabine-M700*1
*1
*1
*1
*1 1 Sabine-M700 K iOS &Android APP 1 a) ON b) LED 2 a) 2 b) c) 2 d) e) 3 a) 2 REC) b) c 4 a) LEDAPP/
b) 5 c) appAPP LED(//) d) app5 5 a) b) 6 2/
3 REC) 1.USB 2. 4 1 a) M700 1 b) M7003
... c) Sabine M700 5 Sabine M700 2 3
5 3 M700 5 1.;
2.;
3.;
4.;
5.;
6.;
7.;
8. 6 7