Modular Approval Attestation Modular Approval Request FCC (KDB 996369 D01 & Part 15.212) Applicant Model Name(s) FCC ID IC ID Safetrust Inc SA200 2ANI5SA200 23133-SA200 No Item Single Modular Approval Requirements The radio elements must have the radio frequency circuitry shielded. Physical components and tuning capacitor(s) may be located external to the shield, but must be on the module assembly The module must have buffered modulation/data inputs to ensure that the device will comply with Part 15 requirements with any type of input signal The module must contain power supply regulation on the module;
The module must contain a permanently attached antenna, or contain a unique antenna connector, and be marketed and operated only with specific antenna(s), per 15.203, 15.204(b), 15.204(c), 15.212(a),2.929(b);
The module must demonstrate compliance in a stand-alone configuration;
The module must be labeled with its permanently affixed FCC ID label, or use an electronic display (see KDB Publication 784748);
The module must comply with all specific rules applicable to the transmitter, including all the conditions provided in the integration instructions by the grantee;
The module must comply with RF exposure requirements 1 2 3 4 5 6 7 8 Yes O O O O O O O O A limited modular approval may be granted for single or split modular transmitters that do not comply with all of the above requirements, e.g., shielding, minimum signaling amplitude, buffered modulation/data inputs, or power supply regulation, if the manufacturer can demonstrate by alternative means in the application for equipment authorization that the modular transmitter meets all the applicable Limited modular approval also may be granted in those instances where compliance with RF exposure rules is demonstrated only for particular product configurations. The applicant for certification must state how control of the end product into which the module will be installed will be maintained such that full compliance of the end product is always ensured. Should you have any questions, please contact us. Sincerely, ______________________ Jack Bubany Vice President / Safetrust Inc 8116 Mill Creek Road Fremont, CA 94539, U.S.A.