FCC ID: VW3FAST5280 Sagemcom FAST 5280 Wireless Home WiFi Router

Setting Up WiFi 8 0 2 .1 1 a c Wa v e 2 R o u t e r Identify your equipment Note: You should already have a coax cable connected to your modem. Coax Cord Power Cord Ethernet Cable 1 a b c Unplug the modem Make sure the modem is connected and activated before installing this router. Unplug the power cable from the modem, and then plug it back in. After you plug in the modem, wait for it to connect to the network (about 2 to 5 minutes) before proceeding to the next step. 2 a b c Connect the modem and the WiFi router Connect one end of the Ethernet cable to the modem, and the other end to the yellow internet port on the WiFi router. Plug the power cord into the WiFi router, then plug the other end into an electrical outlet. Wait for the WiFi light on the front panel of the WiFi router to turn on. modem modem electrical outlet modem WiFi router Network Name (SSID) cable outlet internet coax cable coax power ethernet cable power cord b coax power a WiFi router internet b 3 a b c Connect a wireless device to the WiFi router On your device, make sure your WiFi is turned on, then open the WiFi connections. Select the unique network name (SSID) as printed on the WiFi router and on the enclosed stickers. If your device is 5 GHz capable, connecting to the 5G network may provide a better experience. Enter the WiFi password as printed on the WiFi router. This password is also printed on the stickers included with the router. Follow steps A-C to connect other devices. Tips To get the best WiFi coverage, place the WiFi router in a central location in your home. Also, avoid placing the device in the basement, a desk drawer or other enclosed area, as this can affect your signal strength. Place the WiFi router away from household electronics like baby monitors, microwaves and wireless headsets. These can sometimes interfere with your signal. a Need more help?

In-home WiFi Business WiFi spectrum.net/inhomewifi spectrumbusiness.net/businesswifi electrical outlet cable outlet 1506-13JT000 coax cable power cord modem internet coax power WiFi router network name (SSID) reset ethernet ethernet cable internet USB power Safety and Certifications Important Information about the Sagemcom FAST 5280 (aka. RAC2V1S):

Installation and Safe Usage Instructions:

1. Place the router in a vertical orientation on a flat surface. 2. Connect the manufacturer supplied AC to DC power adapter. The FAST 5280 router requires the use of a 12VDC, 2.5A power adapter. Only use a manufacturer supplied and approved power adapter and Ethernet cable. 3. Connect the FAST 5280 to the AC Mains in accordance with the installation instructions in this booklet, and the markings on the identification label (voltage, current, and frequency of electricity network). 4. Connect the Ethernet cable (provided) to the RJ45 port labeled wan on one end and to the Internet access device provided by your ISP on the other end. 5. For connection of a computer with an Ethernet cable use one of the RJ45 ports on the product marked "1", "2",

"3", or "4". Then connect the other end of the Ethernet Cable to the Ethernet port of a computer. Repeat as necessary with the other available Ethernet ports. When using this device, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons including the following:

1. Do not use this product near water and avoid contact with moisture. For example, does not use near a bathtub, wash bowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool. Care should be taken so that liquids are not spilled on this equipment. 2. This equipment is for indoor use only, do not place or install in an outdoor location. 3. Place your product on a firm, solid surface, no obstacle at a minimum distance of 20cm (0.65ft). If you put it on something unsteady, it may fall and be damaged. If you place it on a soft surface, such as rug, sofa or cushion, the vents may be blocked, causing the product to overheat. 4. Never insert objects into the vents of this equipment as this can result in the risk of electrical shock or fire. 5. As the power adapter is the only way to connect to the electrical network, the product must be installed near an 6. This equipment should only be operated with the type of power supply (Voltage and Current) indicated on the easily accessed power outlet. marking label. 7. Do not overload wall outlets or extension cords. Doing so can result in the risk of fire or electrical shock. 8. Avoid blocking any vent openings or exhaust exits on this equipment. Do not place equipment in a built-in installation such as a cabinet that may impede the flow of air through the ventilation openings. 9. The equipment should be situated away from heat sources such as radiators, heat registers, stoves, or other heat producing appliances and equipment. 10. Care should be taken to ensure that the power cord is routed, so it is not likely to be walked on or pinched by 11. Unplug this equipment before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for items placed upon or next to it. cleaning only. 12. This equipment is not user serviceable and is to be serviced by qualified personnel only. Do not disassemble this equipment. If service is required, disconnect all power from the equipment and consult qualified service personnel. 13. To disconnect this equipment from AC power, unplug the power supply from the AC wall socket. 14. Connect only to in house equipment (SELV interface). It is not allowed to connect to public cable distribution or cable television network. 15. Use the product in the environment specified as below:

-

-

-

Air temperature between 0C (32 F) and +40C (104 F). Relative humidity between 20% and 90%. Altitude: 2000 meters (6561ft) maximum. Save these Instructions!

253723558 21 March 2017 1 Safety and Certifications Federal Communications Commission (FCC) Statements This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may cause undesired operation. Modifications:

You are cautioned that changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment. FCC Responsible Party:

Sagemcom USA 14651 N. Dallas Parkway Suite 900 Dallas, TX 75254 Phone: 972-674-4100 Radio Frequency Interference Statement Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

1. Reorient or relocate the receiving antenna. 2. Increase the separation between the equipment and receiver. 3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. 4. Consult the dealer or an experienced radio/TV technician for help. FCC Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This device produces radio frequency energy in the 2.4GHz and 5GHz spectrum. The antenna must be positioned to keep a minimum distance of 30cm (0.98ft) from the radiating element to any nearby person. Issued by Sagemcom Broadband SAS Sagemcom 250, route de l'Empereur - 92500 RUEIL MALMAISON FRANCE Sagemcom Broadband SAS 2017 All rights reserved. Subject to availability. Rights of modifications reserved. www.sagemcom.com 253723558 21 March 2017 2

Left side: 28.64 x 14.79mm Right side: 35.13x12.44mm Total : 35.13 x 44.5mm

= aGeMCOM Declaration of Authorization Rueil-Malmaison, on August 1, 2018 We Name:

Address:

City:

Country:

Declare that:

SAGEMCOM BROADBAND SAS 250 Route de l'Empereur RUEil MALMAISON CEDEX France Name Representative of agent: Ms. Mandy Wang Agent Company name:

Address:

City:

Country:

BTL Inc. No.3 Jinshagang 1st Road, Shixia, Dalang Town Dong Guan China is authorized to apply for Certification and signing related documents of the following product(s), including 731 form(s):

Product description:

Type designation:

Trademark:

FCCID:

Wireless Home Router SAGEMCOM FAST 5280 SAGEMCOM VW3FAST5280 on our behalf. Date:

August 1 st , 2018 City:

RUEil MALMAISON CEDEX Name:

Jacques LE ROUX Signature: .. .... .

'---'::~~~19Ci al 250. route de l'Empereur 92848 RUEIL-MALMAISON CEDEX FRANCE Notes:

(1): Reqwred for FCC a pll1eebl6Fl-_.:_~--....:._;__:_;~-_J

(2): For FCC it must be the Grantee Code "owner" or the authorized agent. el. : +33 (0)1 57 61 1 o oo 1

. S;igemcom Brodbnd SAS Si6ge mial : 250, routed ~(mpuour 92B'l8 RUEl~~ALMAISON CEDEJC FRANCE Tfl t~J(O)I 57 61 10 00 F .. >ll {0)1 57 61 10 01 www.a1J111K04'9.com

----------.......................... --~-

__.aGeMCOM Federal Communications Commission 7 435 Oakland Mills Road Columbia MD 21046 C.C.: Cetecom GmbH, Im Teelbruch 116, 45219 Essen, Germany Subject: Requesting Class II permissive change for FCC ID: VW3FAST5280 To Whom It May Concern:

The purpose of this letter is to request a Class II Permissive change for FCC ID:

VW3FAST5280, original granted on 09/26/2017. There is no other hardware or electrical modification made to the applying modular transmitter itself except below:

The US DFS frequencies 5.25-5.35GHz/5.47-5. 725GHz are added to the original product by software change only. Please contact me if you have any questions or need further information regarding this application. Best Regards, Name: Jacques LE ROUX Funtion: R&D General Methods Department Manager Date: August 1 st .2il.18- - - - - - - - . Signed:

Siege Social 250. route de l'Empereur 92840 RUEIL-MALMAISON CEDEX FRANCE Tel. . +33 (0)1 57 61 10 00 Sog1mcom Broadbnd SAS si.ge so<iol: 250, roule de l'Empmur - '28'8 AVlll-MALMAISON CEDE)( - FRANCE m tll(O)l 576l 10 00 - r .. o>55 (0)1 57 6l lO Ol WWW HgtmcOfll.COnl

--------------.. --

=aGeMCOM CONFIDENTIALITY REQUEST for Certification Service in USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7 435 Oakland Mills Road Columbia, MD 21048 TO WHOM IT MAY CONCERN Rueil-Malmaison, on August 1, 2018 Pursuant to Paragraphs 0.457 and 0.459 of the Commission's Rules (47 C.F.R.) and Section 552(b)(4) of the Freedom of Information Act, we requests confidentiality for the following products:

FCCID VW3FAST5280 Model name FAST5280 Forth e product stated above, we request that the followinq information be held confidential;

Exhibits External Photos Internal Photos Block Diaqram Schematics Test Setup Photos User's Manual Parts List Tune Up Operational Descriptions Long-Term Confidentiality 0 D IXI

~

D I I 0 D IXI Short-Term Confidentiality Short-Term Confidentiality Days I I D l I D D I I I I 0 I I The long-term confidentiality exhibits contain our trade secrets and proprietary information that could be of benefit to our competitors. The short-term confidentiality on the basis of ensuring that business sensitive information remains confidential until the actual marketing of our new device. Sincerely, Name:

Fax:

E-Mail:

ON CEDEX France 92848 jacques.leroux@sagemcom.com Sagemcom Broadband SAS s~ SO<ill: 2SO, routed ~("'fllllur 9zsi;e RIJEllc~~LW.ISON tEDEX FRANCE TI. tn(O)I 57 61 10 00 Fa 35 (0)1 >7 61 LO 01 Ss "''*kal'1e5!!Sl417,l6f liOZ~u.s-aoRCSNirt(tl~

WWW tjgtfftCCHl.CClnl

=aGeMCOM SAGEMCOM BROADBAND SAS Authority to Act as Agent Date: June 06, 2017 Model: FAST5280CH To Whom It May Concern :

We, the undersigned, hereby authorize SGS-CSTC Standards Technical Services Co., Ltd. (SGS) Shenzhen Branch and Joyce Shi in SGS-CSTC Standards Technical Services Co., Ltd. (SGS) Shenzhen Branch to act on our behalf in all matters relating to all processes required in FCC approval and any communication needed with the national authority, shall have the same legal authority as acts on our own behalf. We certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002 (b), to the application is subject to denial of federal benefits, that includes FCC benefits. Thank you, Agency Agreement Expi a~cfiefJ.'EB~

By:

Title:

Jacques LE ROUX

(Print name) ent Manager On behalf of:

SAGEMCOM BROADBAND SAS

(Company Name) Telephone:

+ 33 1 57 61 25 72 S191mcom Broodband SAS S~ iocill : 210, role cle l'Emporm '28"8 AU!ILMALMAISON CEDEX FRANC!

Ttl ll(O)l 5141 10 00 Fe 51 (0)1 57 01 10 01 s A.S "'C<lf)ll:.M dt 59 251 417, !6 . lrio\O 21M no RCS Nmt.,,. www gunc:o.-.<orw

=aGeMCOM SAGEMCOM BROADBAND SAS Rueil-Malmaison, on June 09 09 2017 To:

SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia United States From: SAGEMCOM BROADBAND SAS 250 Route de l'Empereur - 92848 RUEil MALMAISON CEDEX- FRANCE Regarding: Confidentiality Request regarding application for FCC ID: VW3FAST5280 LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commission's rules, the applicant hereby request confidential treatment of the documents listed below, associated with the certification application referenced above. Schematic(s) Block Diagrams Operational Descriptions The documents above contain proprietary information not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. SHORT TERM CONFIDENTIALITY Additionally, the applicant requests the following documents be held confidential until the device is marketed or 180 days from the grant date, whichever is less. If the device is marketed within 180 days of the Grant Date, the applicant will notify the TCB per FCC KDB 726920 DOl Confidentiality Request Procedures. External Photos Internal Photos Test Setup Photos User manual(s) Sincerely, Printed Name:

Signature:

e~R.a~MCO~tl

: R&D General and

. S. On behalf of Company: SAG ~'1;~Q.,tJ?~~ND SAS

+ 33 jl2,6~ ,8,Vl;Jl.:Mfil.MAISON CEDEX

-t~~ L!> IL Telephone:

E-mail Si!Jomcom Broodbond SAS S~ mYI : 250, roul< do l'Emptrour 9ZB41 RIJ!ILMALMAISON CEDEX FRANCE Tfl +H(O)l 57 U 10 00 Fa 53 (0)1 57 61 10 01 WWW l'WOfll.Conl