FCC ID: VW3DIW377 Set Top Box

ANT0 / ANT-BT Peak gains Frequency

(MHz) ANT0 / ANT-BT Gains

(dBi) ISM band (2.4GHz) UNII-1/2A (5150-5350MHZ) UNII-2C (5470-5725MHZ) UNII-3 (5725-5850MHZ) 2.1 1.8 2 2.3 ANT1 Peak gains Frequency

(MHz) ANT1 Gains

(dBi) ISM band (2.4GHz) UNII-1/2A (5150-5350MHZ) UNII-2C (5470-5725MHZ) UNII-3 (5725-5850MHZ) 2.1 1.2 0.3 0.5

This product contains technology subject to certain intellectual property rights of Microsoft. Use or distribution of this technology outside of this product is prohibited without the appropriate license(s) from Microsoft. Content owners use Microsoft PlayReady content access technology to protect their intellectual property, including copyrighted content. This device uses PlayReady technology to access PlayReady protected content and/or WMDRM-protected content. If the device fails to properly enforce restrictions on content usage, content owners may require Microsoft to revoke the devices ability to consume PlayReady-protected content. Revocation should not affect unprotected content or content protected by other content access technologies. Content owners may require you to upgrade PlayReady to access their content. If you decline an upgrade, you will not be able to access content that requires the upgrade. This product is licensed under the AVC patent portfolio license for the personal and non-

commercial use of a consumer to: (i) encode video in compliance with the AVC standard (AVC-

video) and/or (ii) decode AVC video that was encoded by a consumer engaged in a personal and non-commercial activity and/or was obtained from a video provider licensed to provide AVC-video. No license is granted or shall be implied for any other use. Additional information may be obtained from MPEG LA, LLC see http://www.mpegla.com. Covered by one or more claims of the patents listed at patentlist.hevcadvance.com. All other brands and logos are trademarks or registered trademarks of their respective owners. TM Issued by Sagemcom Broadband SAS Sagemcom Broadband 250, route de lEmpereur - 92500 RUEIL MALMAISON France Sagemcom Broadband SAS 2022 All rights reserved. Subject to availability. Rights of modifications reserved. www.sagemcom.com Get to know your Optimum Stream remote TV Power Optimum Up Left Down Back Volume Up/Down Mute Input Power Netflix Select Right Home Google Assistant Play/Pause Channel Up/Down Settings Apps CS-14154_Stream_Insert_105mmx148.5mm.indd 2 CS-14154_Stream_Insert_105mmx148.5mm.indd 2 6/24/22 8:49 AM 6/24/22 8:49 AM Safe Usage and Certifications:

1. Place the product on a flat surface. 2. Connect the manufacturer supplied AC power adapter. The Optimum Stream requires the use of a 12 VDC, 1A power adapter in compliance with PS2 or LPS according to annex Q of UL 62368-1. Only use a manufacturer supplied and approved power adapter. Always first plug the adapter lead into the Optimum Stream, then the AC adapter into the AC wall socket. If you do not follow this sequence for set-up, you may get an electric shock. 3. Connect the power adapter to the AC outlet in accordance with the markings on the identification label (voltage, current, and frequency of electricity network). 4. Optionally, connect the Ethernet cable to the RJ45/Ethernet ports. Then connect the other end of the Ethernet Cable to the Ethernet port of your internet service device.. When using this device, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons including the following:

1. Do not use this product near water and avoid contact with moisture. For example, do not use it near a bathtub, wash bowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool. Care should be taken so that liquids are not spilled on this equipment. 2. This equipment is for indoor use only, do not place or install it in an outdoor location. 3. Do not overload wall outlets or extension cords. Doing so can result in the risk of fire or electrical shock. 4. The equipment should be situated away from heat sources such as radiators, heat registers, stoves, or other heat-producing appliances and equipment. 5. Care should be taken to ensure that the power cord is routed so it is not likely to be walked on or pinched by items placed upon or next to it. 6. Unplug this equipment before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning only. 7. This equipment is not user serviceable and is to be serviced by qualified personnel only. Do not disassemble this equipment. If service is required, disconnect all power from the equipment and consult qualified service personnel. 8. To disconnect this equipment from AC power, unplug the power supply from the AC wall socket. 9. Make sure the power socket to which you connect the power cord is easily accessible and as close as possible to the equipment so that the appliance can be unplugged quickly in case of a problem. Radio Frequency Interference Statement Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

FCC Radio Frequency Radiation Exposure Statement This equipment complies with FCC1.1310 for radio frequency radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This device produces radio frequency energy in the 2.4 GHz and 5 GHz spectrum. The antenna should be positioned to keep a minimum distance of 30cm (0.98ft) from the radiating element to any nearby person. Federal Communications Commission (FCC) Statements FCC ID: VW3DIW377 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may cause undesired operation. Modifications:

You are cautioned that changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment. FCC Responsible Party: Sagemcom USA 14651 N. Dallas Parkway Suite 900 Dallas, TX 75254 Phone: 972-674-4100 Model Name: DIW377 ALT US Product Name: Optimum Stream Licenses and trademarks The terms HDMI, HDMI High-Definition Multimedia Interface, and the HDMI logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. Manufactured under license from Dolby Laboratories. Dolby, Dolby Audio, Dolby Vision and the double-D symbol are trademarks of Dolby Laboratories Licensing Corporation. Wi-Fi and Wi-Fi logo are registered trademark of Wi-Fi Alliance. Bluetooth is a registered trademark of Bluetooth SIG, Inc. Google is a trademark of Google LLC. CS-14154_Stream_Insert_105mmx148.5mm.indd 3-4 CS-14154_Stream_Insert_105mmx148.5mm.indd 3-4 6/24/22 8:49 AM 6/24/22 8:49 AM

Laboratories Licensing Corporation. Google, Google Play, Android TV and Chromecast built-in are trademarks of Google LLC. HDMI Licensing Administrator, Inc. Dolby, Dolby Audio, Dolby Atmos, Dolby Vision and double-D symbol are trademarks of Dolby The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of stream. Getting started with Optimum Stream 1 Connect the HDMI cable. 2 Install the batteries in the remote. 3 Plug in the power cord and press the power button. ON/OFF 12V1A LAN HDMI S/PDIF ON/OFF 12V1A LAN HDMI S/PDIF 4 Turn on your TV and select the HDMI input that your Stream is connected to. 5 Follow the on-screen instructions to complete setup. For more information visit optimum.net/streamwelcome Optimum is working to reduce our impact on the environment. We have packaged your Optimum Stream with responsibly sourced and recyclable materials.

B A Contraintes du logo Sagemcom voir Spec. 3000474978 000 xx Code barre type 128 12 digits SGC S/N : 123456789012 Code barre type 128 12 digits ETH MAC : 123456789012 Code barre type 128 12 digits Wi-Fi MAC : 123456789012 Tested To Comply With FCC Standards FCC ID : VW3DIW377 Code barre type 128 12 digits I.T.E. E308616 DIW377 ALT US 253964745 MSO Part Number : 46777 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. CA SN : 123456789012 Made in Country of Production Country Of Production est un champ renseigner par lusine de production. Country Of Production is a field to be informed by the production plant 2 Fabriqu suivant tiquette vierge 253907302 (90x30mm) Manufactured according to the virgin label 253907302 (90x30mm) NOTA : Rfrence : Norme EN IEC 62368-1 ar cle F.3.10 Les marquages doivent rester visibles, lisibles et indlbiles aprs fro ement la main pendant 15 s avec un chi on imbib d'eau, et pendant 15 s avec un chi on imbib d'essence minrale (n-hexane). Aprs apposi on sur le produit, aprs les tests ci-dessus, l que e ne doit pas se corner et ne doit pas tre dtachable la main. NOTA : Reference : Standard EN IEC 62368-1 clause F.3.10 Markings shall remain visible, legible and indelible a er rubbing by hand for 15 s with a piece of cloth soaked with water and for 15 s with a piece of cloth soaked with the petroleum spirit (n-hexane). A er a xing on the product, a er the above tests, label shall show no curling and shall not be removable by hand. F. WAIRY 14/03/22 F. HANG DESCRIPTION:

Etiq. Logistique DIW377 Alt US FR :

EN : Logitical sticker DIW377 Alt US 1 02/05/22 FEUILLE / SHEET 1/1 R.FAB / P.N. 253988451 3 0 0 0 5 0 0 1 8 6 R46 000 02

Sa_m m

= >) LONG-TERM CONFIDENTIALITY REQUEST for Certification Service in the USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 TO WHOM IT MAY CONCERN Pursuant to Paragraphs 0.457 and 0.459 of the Commissions Rules (47 C.F.R.) and Section 552(b)(4) of he Freedom of Information Act, we request Long-Term Confidentiality for the following product:

Check vou GC here Click Grantee Search. Grantee Code Equipment Product Code FCC ID VW3 DIW377 For the product stated above, we request Long-Term Confidentiality for exhibits which contain Block Diagram, Operational Description, Parts List/Tune Up Info, Schematics, SDR Software/Security Info. The above exhibits contain our trade secrets and proprietary information that could be of benefit to our competitors. This information will not be publicly available. If you have any questions, please feel free to contact us at the address shown below Sincerely, Company Name:

SAGEMCOM BROADBAND SAS_ Phone: = +33 1 57 61 25 72 250 Route de I'Empereur Fax:

Company . Address: 92848 E-mail _jacques.leroux@sagemcom.com RUEIL MALMAISON CEDEX-FRANCE Contact Name: Jacques LE ROUX ae oe)

. Signature com Broadband S.A.S Signature: Date: 2( ERT je 58 251 417,36 440 294 510 RCS NANTERRE Sige Social :

250, route de Il'Empereur 92848 RUEIL-MALMAISON CEDEX FRANCE Tl. : +33 (0)1 57 61 10 00 Document Version | |

2070-10-30