FCC ID: VW3FAST5285 Wireless Router

Safety and Certifications Important Information about the Sagemcom FAST 5285 (SAX1V1S):

Installation and Safe Usage Instructions:

1. Place the router in a vertical orientation on a flat surface. 2. Connect the manufacturer supplied AC to DC power adapter. The FAST 5285 router requires the use of a 12VDC, 3A power adapter. Only use a manufacturer supplied and approved power adapter and Ethernet cable. 3. Connect the FAST 5285 to the AC Mains in accordance with the installation instructions in this booklet, and the markings on the identification label (voltage, current, and frequency of electricity network). 4. Connect the Ethernet cable (provided) to the RJ45 port labeled wan on one end and to the Internet access device provided by your ISP on the other end. 5. For connection of a computer with an Ethernet cable use one of the RJ45 ports on the product marked "1", "2",

"3", or "4". Then connect the other end of the Ethernet Cable to the Ethernet port of a computer. Repeat as necessary with the other available Ethernet ports. When using this device, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons including the following:

1. Do not use this product near water and avoid contact with moisture. For example, does not use near a bathtub, wash bowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool. Care should be taken so that liquids are not spilled on this equipment. 2. This equipment is for indoor use only, do not place or install in an outdoor location. 3. Place your product on a firm, solid surface, no obstacle at a minimum distance of 20cm (0.65ft). If you put it on something unsteady, it may fall and be damaged. If you place it on a soft surface, such as rug, sofa or cushion, the vents may be blocked, causing the product to overheat. 4. Never insert objects into the vents of this equipment as this can result in the risk of electrical shock or fire. 5. As the power adapter is the only way to connect to the electrical network, the product must be installed near an 6. This equipment should only be operated with the type of power supply (Voltage and Current) indicated on the easily accessed power outlet. marking label. 7. Do not overload wall outlets or extension cords. Doing so can result in the risk of fire or electrical shock. 8. Avoid blocking any vent openings or exhaust exits on this equipment. Do not place equipment in a built-in installation such as a cabinet that may impede the flow of air through the ventilation openings. 9. The equipment should be situated away from heat sources such as radiators, heat registers, stoves, or other heat producing appliances and equipment. 10. Care should be taken to ensure that the power cord is routed, so it is not likely to be walked on or pinched by items placed upon or next to it. cleaning only. 11. Unplug this equipment before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for 12. This equipment is not user serviceable and is to be serviced by qualified personnel only. Do not disassemble this equipment. If service is required, disconnect all power from the equipment and consult qualified service personnel. 13. To disconnect this equipment from AC power, unplug the power supply from the AC wall socket. 14. Connect only to in house equipment (SELV interface). It is not allowed to connect to public cable distribution or cable television network. 15. Use the product in the environment specified as below:

Air temperature between 0C (32 F) and +40C (104 F). Relative humidity between 20% and 90%. Altitude: 2000 meters (6561ft) maximum. Save these Instructions!

Safety and Certifications Federal Communications Commission (FCC) Statements This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may cause undesired operation. Modifications:

You are cautioned that changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment. FCC Responsible Party:

Sagemcom USA 14651 N. Dallas Parkway Suite 900 Dallas, TX 75254 Phone: 972-674-4100 Radio Frequency Interference Statement Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

1. Reorient or relocate the receiving antenna. 2. Increase the separation between the equipment and receiver. 3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. 4. Consult the dealer or an experienced radio/TV technician for help. FCC Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This device produces radio frequency energy in the 2.4GHz and 5GHz spectrum. The antenna must be positioned to keep a minimum distance of 30cm (0.98ft) from the radiating element to any nearby person. Issued by Sagemcom Broadband SAS Sagemcom 250, route de l'Empereur - 92500 RUEIL MALMAISON FRANCE Sagemcom Broadband SAS 2019 All rights reserved. Subject to availability. Rights of modifications reserved. www.sagemcom.com

Sa emcom SAGEMCOM BROADBAND SAS

| IP oo Sag m m

(0) 250 Route de l'Empereur - 92848 RUEIL MALMAISON CEDEX- FRANCE Cass ermissive Change Letter Date: 2020-09-08 Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 To Whom It May Concern:

Request for Class Il Permissive Change FCC ID: VW3FAST5285 / Grant Date: 08/12/2020 Pursuant to CFR 2.1043, SAGEMCOM BROADBAND SAS hereby requests a Class II Permissive Change The model name shall be same as before Modification:

Adding U-NII-2A and U-NII-2C bands (5250~5350 MHz, 5470~5725 MHz) for this device The device operates in the TDWR band. There is no change in hardware or in existing RF relevant portion. The product enables U-NII-2A and U-NII-2C bands via Firmware by factory. There is no any software that can be modified by end-user. Add channel bandwidth 160MHz for the device. STA cae Applicants company name SAGEMCOM BROADBAND SAS Applicants company address 250 Route de |Empereur - 92848 RUEIL MALMAISON CEDEX- FRANCE Sfedarele lacs Name and Job Title Jacques LE ROUX / R&D General Methods Department Manager eT jacques.leroux@sagemcom.com ar cea (Cava ew es a oz) Sagemcom Broadband S.A.S. Au capital de 58 251 417,36 cP aSea EE 4 +33 (0)1 57 61 38 99 Sige Social :

250, route de lEmpereur 92848 RUEIL-MALMAISON CEDEX FRANCE Tl.:+33 157611000 SAGEMCOM- Headquarter : 250 Route de lEmpereur 92848 RUEIL MALMAISON CEDEX - FRANCE

agemco SAGEMCOM BROADBAND SAS 250 Route de lEmpereur - 92848 RUEIL MALMAISON CEDEX- FRANCE Confidentia Letter Dic) isa AePA0 melo Ol.) Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Subject: Request for Confidentiality FCCID > VW3FAST5285 To Whom It May Concern:

Pursuant to Sections 0.457 and 0.459 of the Commissions Rules, we hereby respectfully request confidential treatment of information accompanying this application as outlined below:

@ Operational Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. We understand that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Applicants company name SAGEMCOM BROADBAND SAS a eal ll lela 250 Route de |Empereur - 92848 RUEIL MALMAISON CEDEX- FRANCE ST4atc deel ee) Name and Job Title Jacques LE ROUX / R&D General Methods Department Manager Sell jacques.leroux@sagemcom.com Tel +33 (0)1 57 61 25 72

=n ole) Sagemcom Broadband S.A.S Au capital de 58 251 417,36 440 294 510 RCS NANTERRE Fax +33 (0)1 57 61 38 99 Sidge Social :

250, route de |'Empereur 92848 RUEIL-MALMAISON CEDEX aya Ohad Tl. : +33 (0)1 57 61 10 00 SAGEMCOM- Headquarter : 250 Route de lEmpereur 92848 RUEIL MALMAISON CEDEX - FRANCE

Sagemcom SAGEMCOM BROADBAND SAS P At a EE 250 Route de IEmpereur - 92848 RUEIL MALMAISON CEDEX- FRANCE ower of torney Date: 2020-09-08 Dear Sir,

| hereby have entrusted the following person to be a proxy regarding application for Type Certification. AJ oleaco multe Lm ioe Address : No.8, Lane 724, Bo-ai St., Jnubei City, HsinChu County 302, Taiwan, R.O.C. Name : Leo Huang Job Title Aa ETO) 318 earl : Leohuang@sporton.com.tw 1am therefore responsible for the contents of the application. FCC ID: VW3FAST5285 Sincerely, Applicants company name SAGEMCOM BROADBAND SAS Applicants company address 250 Route de IEmpereur - 92848 RUEIL MALMAISON CEDEX- FRANCE Signature Name and Job Title Jacques LE ROUX / R&D General Methods Department Manager A jacques.leroux@sagemcom.com Tel +33 (0)1 57 61 25 72 lah Sem OM OYA Mt BSS) Sagemcom Broadband S.A.S. Met CE Ve SES PUP. SST ect Ba Sidge Social ;

250, route de |'Empereur 92848 RUEIL-MALMAISON CEDEX FRANCE Tl. : +33 (0)1 57 61 10 00 SAGEMCOM- Headauarter : 250 Route de lEmpereur 92848 RUEIL MALMAISON CEDEX - FRANCE

Sagemcom SAGEMCOM BROADBAND SAS TP D ee Sageme m 250 Route de IEmpereur - 92848 RUEIL MALMAISON CEDEX- FRANCE C eclaration Letter Date: 2020-09-08 FCC ID = VW3FAST5285 To Whom It May Concern:

We, SAGEMCOM BROADBAND SAS, declare that the device supports the TPC function in final F/W when EUT is sold to FCC market. test 10 See Ael ce Applicants company name SAGEMCOM BROADBAND SAS Applicants company address 250 Route de IEmpereur - 92848 RUEIL MALMAISON CEDEX- FRANCE Signature Name and Job Title Jacques LE ROUX / R&D General Methods Department Manager YETI jacques.leroux@sagemcom.com a] +33 (0)1 57 61 25 72 O Sagemcom Broadband S.A.S. Au capital de 58 251 417,36 440 294 510 RCS NANTERRE Fax +33 (0)1 57 61 38 99 Sidge Social :

PILOM en RoC MMi Le 92848 RUEIL-MALMAISON CEDEX aay ela Tl. : +33 (0)1 57 61 10 00 SAGEMCOM- Headquarter : 250 Route de |Empereur 92848 RUEIL MALMAISON CEDEX - FRANCE

Sagemcom SAGEMCOM BROADBAND SAS P I I I

[ 250, Emp

. ereur 92848 RUEIL-MAl \LMAISON DEX RAED | ethods Department 250 Route de lEmpereur - 92848 RUEIL MALMAISON CEDEX- FRANCE rofessiona nstal ation Dec aration Date:2020-07-31 FCC ID : VW3FAST5285 To Whom It May Concern Please be advised that due to the unique Market and function targeted by this product, this product will need special trained professional in configuring and installing the product. We hereby declare that the product will be distributed through controlled distribution channel which has special trained professional to install this product and will not be sold directly to the general public through retail store. Sincerely yours, Applicants company name SAGEMCOM BROADBAND SAS BUD lela PLO NRT N CEDEX- FRANCE Sagemcom

; ALS Nya] eles 510 RCS NANTERRE route de 3 Name and Job Title Jacques LE RO Genera M Manager aE jacques. ae Tel +33 (0)157 6125 72 ah +33 (0)1 57 61 38 99 SAGEMCOM- Headquarter : 250 Route de IEmpereur 92848 RUEIL MALMAISON CEDEX - FRANCE