SMART SHOES USERS MANUAL FIRST-TIME USER INSTRUCTION 01. Please charge salted shoes
* DC 5V 2000mA 1. Take out insole a. b. 2. Plug charging cable into USB port and charge salted shoes LED light in charging Recommended minimum recharge time : 30 minutes Condition Status LED light Battery Low Red LED light flashes Charging Battery Normal Yellow LED light flashes Battery High Sky-Blue LED light flashes Changing completed LED Light off 02. Run to Pairing mode 1. You must press and hold pairing button over 3 seconds in the first use to turn shoes on(No need any on/off action after the first pairing) 2. Press pairing button shortly, then it goes to pairing mode and LED light(pink) is flickered. 3. When LED (pink) is flickered, press connect button to connect mobile and shoes
* Right Shoe View Pairing Button Reset Button When battery is remained, LED light(Blue) appears in the first action for button and disconnection. Blue LED light flashed for 5 minutes, it automatically goes to sleep mode. Button activation mode and LED light Activation Button LED light Go to Pairing mode Push pairing button shortly Green LED light flashes 2 times, then pink LED light flashes Reset in error Push reset button shortly Blue LED light flashes 03. Install and activate SALTED application Go to SALTED Service www.saltedventure.com Search and download SALTED application in iOS app store and Google play store.
*Android OS : 4.4 version or higher required, 5.0 version or higher recommended
*iOS : 8.0 version or higher, iPhone 5 or higher, iPad 3 or higher required 04. Connect shoes to app via Bluetooth Turn on Bluetooth on your mobile phone and open SALTED app. Connect shoes to app with connection button In pairing mode that Pink LED light flashes on shoes Green LED light flashed when it is connected perfectly. Blue LED light flashes in disconnection
* No more reconnection in 5 minutes, LED light automatically off and it goes to sleep mode. More than 2 pairs of shoes place around you, connection may be faulty. 05. Workout and do Smart training with SALTED ProductGuide 01. Productspecifications Transmission frequency : Bluetooth(BLE) : 2 402 MHz ~ 2 480 MHz Receive frequency : Bluetooth(BLE) : 2 402 MHz ~ 2 480 MHz Conducted Net Power : Bluetooth(BLE) : 0.4 mW Service voltage : DC 3.8 V (Battery) Operating temperature : (-)10 C ~(+)50 C 02. Productauthentication Company name : Salted Venture Co., Ltd Tools andmaterials : Charging device Manufacturing date : marked separately Manufacturer : Salted Venture Co., Ltd / made in Korea Authentication numbers : R-C-IOF-FTU01-BK Note : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, user and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, There is no guarantee that interference will not occur in a particular installation, If this equipment does cause harmful Interference to radio or television reception, which can be determined by turning the equipment off and on, the user Is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receivers is connected.
- Consult the dealer or an experienced radio/TV technician for help. The FCC requires the user to be notified that any changes or modifications made to this device that are not Expressly approved by SALTED VENTURE may void the users authority to operate the equipment. Produ uct inqui iry & iss ue e questions while using g our produc cts, Please c contact the c customer experience is via email be
+82)2 . 552 cs@saltedven s : 11, Nonhy ssues or hav elow 2 . 0815 nture.com yeon-ro 76-g If you e service v Phone :
Email : c Address gil, Gangnam m-gu, Seoul, South Kore a Handling Precautions Damage Compensation Regulation(1 year Limited Warranty) Though we work continually to improve our products quality and reliability, our product can malfunction or fail. Depending on the condition of your product, we repair, exchange, or refund your product based on consumer law
*Exception for compensation: the product damaged due to mishandling or the product past its limited warranty period of ONE (1) YEAR. We are not responsible for damage on the product due to an unreasonable use, improper care/washing, or consequential natural breakdown of materials (damage on sensors, etc) which occurs with the use of past its limited warranty period of ONE (1) YEAR. In such cases, we repaired the product at the cost of individuals own expense if damages are repairable. Exchange / Refund
- You have 7 calendar days to return or refund an item from the date you received it, but the item must be unused.
- If the item is defective, we will be responsible for paying for the shipping cost.
- If you change your mind about the item, you will be responsible for paying for your own shipping cost for returning/refunding your item. Product repair (if the damage on the shoes is non-repairable, we exchange the product for new product with an additional cost during the limited warranty period) An adhesion defect : a sensor module and upper of a shoe are detached A seam defect : a stitch is damaged due to defect in seam An operation failure : a sensor malfunctions during the limited warranty period Free repair (if the damage is non-repairable, we exchange your product for new product during the limited warranty period) If sensors malfunction during the limited warranty period by itself not by mishandling of the user, we repair your good for free. Product Issue & Information If you experience issues or have questions while using our products, please contact the customer service via email below. Salted Customer Service : cs@saltedventure.com Proper care and store guideline for different materials
(SALTED is not responsible for damage on the sensor of the product due to the users improper care, storage, and usage.) A laundry, dryer, and UV sterilizer are forbidden for all products. A sensor module can be damaged when a laundry, dryer, or UV sterilizer is used because of its moisture, heat, or electromagnetic waves. We are not responsible for the sensor module damaged because of such reasons. Cleaning guideline for natural leathers (Nubuck, Suede, and Split) Please give extra caution on water. Water is the cause of stain, discoloration, or even damage on the sensor. If shoes are wet, make sure to quickly brush off moisture on shoes with a soft fabric. We are not responsible for the sensor damaged by such reasons. For light contamination, if you clean shoes with a nylon or brush, dust on the shoes is easily removed, and cleaning with a nylon or brush is good for their fur as well. To clean Nubuck leather, use Nubuck eraser or rubber eraser to remove dirt and smudges. A typical leather cleaner can make the shoes discolored and bleached. Please use a cleaner for Nubuck leather after carefully reading the handling precautions. Cleaning guideline for synthetic leather Gently scrub the outside of the shoes with a toothbrush or soft brush. Do not clean the shoes with a soap or a shoe shampoo (hair shampoo). Also, do not soak the shoes in water for a long time. It might cause a malfunction or breakdown of its sensor module. Cleaning guideline for synthetic textile (Nylon, polyster) Gently scrub the outside of the shoes with a soft brush (toothbrush), and allow them to air-dry in shaded area. Proper care and store guideline for different outsole types For shoes with spikes or stud Make sure your spike or stud is intact and secured properly into their respective receptacles. If they are loosened, they might cause an injury, damage, or problem on accuracy of its sensor module. Change worn-out spike or stud in a timely manner. Worn-out spike or stud might cause you sliding resulting in an injury. For your safety, we recommend rotating shoes between rounds for shoes with non-replaceable spike or stud. Guideline for shoe care Do not bend the heel counter of the shoe while putting it on. If you bend the heel counter of the shoe while putting it on, the heel counter can cause improper fit in the heel which can lead to blistering and overall discomfort. Also, it might cause a problem on a ccuracy and durability of its sensor module. Wear shoes for their intended use only Make sure you wear shoes and socks for their intended use only. Sport shoes have different types and materials for how and where they are supposed to be worn
(Sports, indoor, outdoor, dirt, or turf, etc). Not wearing for their intended use can cause an injury or sensor malfunction. Avoid wearing shoes if their outsoles are worn out. If your shoe outsole is worn out, it might cause you sliding on the ground leading to an injury. We are not responsible for accidents such as a sprain, falling, etc while you wear worn out shoes. Avoid wearing shoes on wet and oily surface. Not only there is danger for sliding, but also it might cause damage to the shoes and its sensor module. Avoid wearing shoes where there are an inflammatory material, strong light, heat, or infrared light. It might cause damage, discoloration, malfunction, and air bubble on shoes and its sensor module. If your toenail is either long or short, there is a possibility of an injury while wearing shoes. Avoid wearing shoes in the environment with high salt concentration. Guideline for discoloration All leather or fabric can get discolored because of moisture and friction. Be aware that while wearing shoes, clothes and socks can get color bleeding. We are not responsible for the issues with color bleeding. Guideline for storing shoes Do not store your shoes in your car. You should not store your shoes in your car, where high temperatures can break down shoe materials resulting in damage on your shoes and malfunction in its sensor module. Avoid placing shoes in the environment that is hot, humid, or exposed to direct sunlight. Exposure to direct sunlight or hot / humid environment might cause damage to shoes and its sensor module. When not in use, removing and storing the battery in a cool place is recommended. Other precautions
- Do not attempt to open or modify shoes.
- Bluetooth module of shoes can cause interference with wireless devices or networks How to choose right shoes Make sure to wear shoes which fit for the use. Wearing for outside of its intended use might cause a physical injury or damage on the product. Avoid wearing shoes with barefoot. Wearing with barefoot might cause damage on the product and allergenic reaction. Completely eliminate moisture on shoes. If not, it might cause not only damage on the product, but also skin diseases such as athletes foot Choose a shoe size that fits for your feet. If not, it might be harmful for your health, and sensors might be unable to capture reliable data. Be mindful of a possibility of an injury because of accessories, Vellore, zipper, or battery cap of shoes before you buy shoes.