Installation guide Ei6xx... Eng E D F I Installation guide Gua de instalacin Montageanleitung Guide d'installation Guida all'installazione 2 2a O14
[O 9/16"]
3 3a 4 5
]
"
8
/
1
-
4
[
5 0 1
]
"
4
/
3
-
5
[
5 4 1 10 Mortise Lock not included Cerradura de embutir no incluida O25
[O 1"]
*
* Required only for doors that exceed Eng 60mm [2-3/8"] thickness E
* Slo para puertas de espesor mayor de 60mm
[2-3/8"]
7 O utsid Exterior e 1 m t
*
a x. 4 10 Insid Interior e 9 Eng E SALTO recomends the use of a mortise lock, with a maximum 4 pre-turn SALTO no garantiza el correcto funcionamiento del ensamblaje, si se utilizan cerraduras con pregiro superior a 4 E i 650 m 00 ff t x h r series E i 651 m dd ff t x h r E i 652 m dd ff t x h r E i 653 m dd ff t x h r E i 654 m dd ff t x h r E i 656 m 00 ff t x h r E i 657 m dd ff t x h r E i 658 m 00 ff t x h r E i 660 m 00 ff t x h r E i 6E0 m dd ff t x h r E i 6P0 m 00 ff t x h r E i 661 m dd ff t x h r E i 6E1 m dd ff t x h r E i 6P1 m dd ff t x h r E i 666 m 00 ff t x h r E i 6E6 m 00 ff t x h r E i 6P6 m 00 ff t x h r E i 668 m dd ff t x h r 6 8 Eng AT THIS POINT DO NOT CLOSE THE DOOR PROGRAM THE LOCK FIRST follow user manual E EN ESTE PUNTO NO CIERRE LA PUERTA, PROGRAME PRIMERO LA CERRADURA Consulte el manual del usuario 201122 ED. 14/07/2015 1/4 All contents current at time of publication. SALTO Systems S.L. reserves the right to change availability of any item in this catalog, its design, construction, and/or materials. Installation guide Ei65x... (Selection of Handing) E F D INTRODUCIR HINEINSTECKEN INTRODUIRE INTRODURRE INSERT Eng I Eng PUSH
-PULSAR
-DRCKEN
-POUSSEZ
-PREMERE E D F I PULL Eng E D F I
-TIRAR
-HERAUSZIEHEN
-TIREZ
-TIRARE
-Caution !
-Atencin
-Achtung
-Attention
-Attenzione Eng E D F I Eng E D F I
-Do not disconnect !
-No desconectar
-Verbindung nicht unterbrechen
-Ne pas dconecter
-No scollegare 1 SELECT HANDING
-SELECCIONE MANO
-DRCKERRICHTUNG WHLEN
-CHOISIR LE SENSE DE LE POIGN
-SELEZIONARE MANO Eng E D F I 2 3 1 201122 ED. 14/07/2015 2/4 All contents current at time of publication. SALTO Systems S.L. reserves the right to change availability of any item in this catalog, its design, construction, and/or materials. Installation guide Ei6xx... A
=
E
=
B O14mm.
[O9/16"]
90 MIN.O25mm. MIN.[O1"]
O14mm.
[O9/16"]
C D Eng E NOT OK Incorrecto I
=
=
F Eng E Only LR6 Batteries Slo Baterias LR6 Eng CAUTION!!
Fasten with selfdrilling screw to keep it aligned E ATENCION!!
Fijar el tornillo autotaladrante para mantener el alineamiento Reverse !
-TO FIX COUNTER-CLOCKWISE
-FIJACION: GIRAR SENTIDO ANTIHORARIO
-GEGEN UHRZEIGERSINN FESTSCHRAUBEN
-POUR FIXER, TOURNEZ EN SENS INVERSE DES AIGUILLES DUNE MONTRE
-FISSAGGIO: GIRARE SENSO ANTIORARIO Eng E D F I J G H a Eng E D F I b AT THIS POINT DO NOT CLOSE THE DOOR PROGRAM THE LOCK FIRST NO CIERRE LA PUERTA. PROGRAME LA CERRADURA TRE NICHT SCHLIESSEN. ZUERST SCHLOSS PROGRAMMIEREN NE FERMEZ PAS LA PORTE. PROGRAMMEZ LA BQUILLE AVANT PRIMA DI CHIUDERE LA PORTA, PROGRAMARE LA SERRATURA Eng follow user manual E Consulte el manual del usuario 201122 ED. 14/07/2015 3/4 All contents current at time of publication. SALTO Systems S.L. reserves the right to change availability of any item in this catalog, its design, construction, and/or materials. Installation guide Ei6xx... Ei651 m dd ff t s h Ei661 m dd ff t s h 2 2a 10 3
*****
Eng E D F I HOTEL GUEST ROOM LOCK HABITACION HOTEL HOTELZIMMERSCHLOSS PICE DHTEL CAMERE HOTEL 1
*
10 E
* Slo para puertas de Eng espesor mayor de 60mm
[2-3/8"]
* Required only for doors that exceed 60mm [2-3/8"]
thickness t*
WIRELESS with external door detector 3/4" (19) 3a 3a 4 4b 5 3b 3b 7 8 6 Unplug if mortise lock is LE7Sxx series E i 6xx m 00 ff t x h W series
*
* Door detector for Ai6xx... Eng Wooden doors RFDTCTW18W01 RFDTCTS18W01 Steel doors See installation instruction 220446 or 220449
* Detector de puerta para Ai6xx... E Puertas de madera RFDTCTW18W01 Puertas metalicas RFDTCTS18W01 Ver hoja de instalacin 220446 220449 201122 ED. 14/07/2015 4/4 All contents current at time of publication. SALTO Systems S.L. reserves the right to change availability of any item in this catalog, its design, construction, and/or materials. PRODUCTS DESCRIPTION Compliance PRODUCT TECHNOLOGY SOFTWARE COMMERCIAL NAME MODEL RFID BLUETOOTH SMART CONTROL READER IEEE802.15.4 BLUETOOTH MODULE(S) RF2 MODULE XS4 Original E0102 XS4 Original with Keypad E1215 W09 W0B W0J W0S W09W W0BW W0JW W0BK W0JK W0SK W0BWK W0JWK x x x x x x x x x x x x x x x x x x x x x x EU COMPLIANCE STATEMENT x x x x x 0037 0037 0037 0126 0016 0016 0016 0016 0016 0126 0016 0016 0132 0132 0133 0132 0132 0132 0133 0132 0133 0132 0132 0133 0136 0136
-
0136 0136 0136 0136
-
0136 0136 0038 0038 0038 0038 0038 EN Hereby, SALTO Systems S.L. (Arkotz Kalea (Pol. Lanbarren), 9 20180 Oiartzun Spain), declares that this access control equipment is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU (RED) and 2011/65/EU (RoHS). You will be able to find a copy of the original declaration of conformity at the following Internet address: http://www.saltosystems.com/certificate ES FR Por medio de la presente SALTO Systems S.L. (Arkotz Kalea (Pol. Lanbarren), 9 20180 Oiartzun Spain) declara que este equipo de control de accesos cumple con los requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 2014/53/UE (RED) y 2011/65/UE (RoHS). Podr encontrar una copia de la declaracin de conformidad original en la siguiente direccin de internet: http://www.saltosystems.com/certificate Par la prsente SALTO Systems S.L. (Arkotz Kalea (Pol. Lanbarren), 9 20180 Oiartzun Spai dlae ue lappareil quipement pour le contle das est ofoe aux exigences essentielles et aux autres dispositions pertinentes de la directive 2014/53/UE (RED) et 2011/65/UE (RoHS). Vous pouvez tlcharger une copie de la dlaatio de ofoit oigiale taves ladesse suivate: http://www.saltosystems.com/certificate DE Hiermit erklrt SALTO Systems S.L. (Arkotz Kalea (Pol. Lanbarren), 9-20180 Oiartzun-Spain) dass sich das Gert Zutrittskontrollgerte im bereinstimmung mit den grundlegendenAnforderungen und den brigen einschlgigen Bestimmungen derRichtlinie 2014/53/EU (RED) befindet und 2011/65/EU (RoHS). Eine Kopie der originalen Konformittserklrung finden Sie auf der folgenden Internetseite: http://www.saltosystems.com/certificate NL Hierbij verklaart SALTO Systems S.L. (Arkotz Kalea (Pol. Lanbarren), 9 20180 Oiartzun Spain) dat het toestel toegangscontroleapparatuur in overeenstemming is met de essentile eisen en de andere relevante bepalingen van richtlijn 2014/53/EU (RED) en 2011/65/EU (RoHS). U kunt een kopie van de originele verklaring van overeenstemming vinden op het volgende internetadres: http://www.saltosystems.com/certificate PT A SALTO Systems S.L. declara que este equipamento de controlo de acessos est conforme os requisitos essenciais e outras disposies da Diretiva 2014/53/UE (RED) e 2011/65/EU (RoHS). Poder encontrar uma cpia da declarao de conformidade original na seguinte direo de internet: http://www.saltosystems.com/certificate ELECTRICAL WARNINGS Caution: Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions. Recommended batteries:
Duracell Plus Power AAA (MN2400) Duracell Ultra Power AAA (MX2400) Varta Industrial AAA (04003) Varta High Energy AAA (04903) Varta Max Tech AAA (MN2400) Duracell Plus Power AA (MN1500) Duracell Ultra Power AAA (MX1500) Varta Industrial AA (04006) Varta High Energy AA (04906) Varta Max Tech AA (MN1500) Duracell Ultra CR2 Lithium (DLCR2) Panasonic CR2 Lithium Panasonic CR2 Lithium Industrial SALTO SYSTEMS S.L. www.saltosystems.com 1/2 xxxxxx-ED.-14/12/2017 Pol. Lanbarren, c/Arkotz n9, 20180 Oiartzun, Spain. All contents current at time of publication. SALTO Systems S.L. reserves the right to change availability of any item in this catalog, its design, construction, and/or materials. Compliance FRECUENCY / OUTPUT MAXIMUM POWER TECHNOLOGY OPERATING FRECUENCY OUTPUT MAX. POWER RFID Bluetooth Smart IEEE802.15.4 MECHANICAL WARNINGS 13.56 MHz 2400 2483.5 MHz 2400 2483.5 MHz
+25 dBm
+8 dBm / + 2.8 dBm
+5 dBm In order to confirm the correct operation of this electronic device, SALTO recommends using it in combination with a lock destined for that use (door mass, frequency of use, fire door, etc) and that is in good operational conditions. The SALTO product should be treated with care during the installation process to avoid any aggressive contact that may damage the unit. It may be necessary to loosen the trims mounting during installation. Do not bring the device into contact with oil, paints or acids. Do not paint the door with the mortise lock or electronic device already mounted on the door. CLEANING THE ELECTRONIC DEVICE: a damp cloth with mild soapy water can be used. Never use abrasive soaps or sprays. For best performance, stainless steel should be cleaned regularly. Note that when the door is closed without the lock having been already programmed, the lock will automatically lock and can only be opened with a Portable Programing Device (PPD). If you have questions or doubts on this, please contact your authorized SALTO supplier. LEGAL WARNINGS The user shall be responsible for the correct use and maintenance of the access control equipment according to the instructions herein. SALTO shall not be responsible for any defect, malfunction, loss or damage, whether direct or indirect, caused by or arisen from any improper installation or utilization of the equipment or which contravenes, transgresses or infringes in any manner the abovementioned instructions. SALTOs liailit oeig the euipet is liited to the warranty provided. The warranty does not cover product failures due to repairs, modifications or product manipulations performed in the access control equipment or in the inner electromechanical structure by anyone other than authorized SALTO dealers or personnel. FCC COMPLIANCE STATEMENT This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This product is designed not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission. It must not be co-
located or operating in conjunction with any other antenna or transmitter and it must be installed and operated with minimum distance of 20 cm between the radiator and your body. CANADIAN COMPLIANCE STATEMENT This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly appoved the pat esposile fo opliae ould void the uses authoit to opeate the euipet. Le prsent appaeil est ofoe au CNR dIdustie Caada appliales au appaeils adio eepts de liee. Leploitatio est autoise aux deux conditions suivantes: lappaeil e doit pas poduie de ouillage, et lutilisateu de lappaeil doit aepte tout ouillage adioletiue sui, e si le ouillage est suseptile de compromettre le fonctionnement. This product is designed not to exceed the emission limits for exposure to radio frequency (RF) energy set by the ISED. It must not be co-located or operating in conjunction with any other antenna or transmitter and it must be installed and operated with minimum distance of 20 cm between the radiator and your body. Ce produit est conu pour ne pas dpasser les limites d'mission pour l'exposition l'nergie radiofrquence (RF) tablie par l'ISDE. Il ne doit pas tre colocalis ni fonctionner conjointement avec autre antenne ou autre metteu et il doit tre install de faon garder une distance minimale de 20 cm entre la source de rayonnements et votre corps. JAPANESE COMPLIANCE STATEMENT
FCC15 AZigbeeEMCVCCI A
VCCIAFCC15A
RF2MODULEhttp://www.saltosystems.com/certificate SALTO SYSTEMS S.L. www.saltosystems.com Pol. Lanbarren, c/Arkotz n9, 20180 Oiartzun, Spain. 2/2 xxxxxx-ED.-14/12/2017 All contents current at time of publication. SALTO Systems S.L. reserves the right to change availability of any item in this catalog, its design, construction, and/or materials.