FCC ID: UKCIQ2 SALTO KS IQ2.0 communication hub with Ethernet/PoE and cellular technology to connect the wireless locks to the SALTO KS cloud and IEEE 802.15.4 and Bluetooth LE technology to communicate with the access points.

PRODUCTS DESCRIPTION Compliance PRODUCT TECHNOLOGY POWER SUPPLY SOFTWARE COMMERCIAL NAME MODEL BLUETOOTH SMART WIFI IEEE802.15.4 12V PoE CONTROL RF2 MODULE BLUETOOTH MODULE IQ2.0 IQ222 IQ223 IQ224 x x x x x x x x x x x CCCPROD CCCPROD CCCPROD 0091 0091 0091

-

-

-

EU COMPLIANCE STATEMENT EN Hereby, SALTO Systems S.L. (Arkotz Kalea (Pol. Lanbarren), 9 20180 Oiartzun Spain), declares that this access control equipment is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU (RED) and 2011/65/EU (RoHS). You will be able to find a copy of the original declaration of conformity at the following Internet address: http://www.saltosystems.com/certificate ES FR Por medio de la presente SALTO Systems S.L. (Arkotz Kalea (Pol. Lanbarren), 9 20180 Oiartzun Spain) declara que este equipo de control de accesos cumple con los requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 2014/53/UE (RED) y 2011/65/UE (RoHS). Podr encontrar una copia de la declaracin de conformidad original en la siguiente direccin de internet: http://www.saltosystems.com/certificate Par la prsente SALTO Systems S.L. (Arkotz Kalea (Pol. Lanbarren), 9 20180 Oiartzun Spain) dclare que lappareil quipement pour le contrle daccs est conforme aux exigences essentielles et aux autres dispositions pertinentes de la directive 2014/53/UE (RED) et 2011/65/UE (RoHS). Vous pouvez tlcharger une copie de la dclaration de conformit originale travers ladresse suivante: http://www.saltosystems.com/certificate DE Hiermit erklrt SALTO Systems S.L. (Arkotz Kalea (Pol. Lanbarren), 9-20180 Oiartzun-Spain) dass sich das Gert Zutrittskontrollgerte im bereinstimmung mit den grundlegendenAnforderungen und den brigen einschlgigen Bestimmungen derRichtlinie 2014/53/EU (RED) befindet und 2011/65/EU (RoHS). Eine Kopie der originalen Konformittserklrung finden Sie auf der folgenden Internetseite: http://www.saltosystems.com/certificate NL Hierbij verklaart SALTO Systems S.L. (Arkotz Kalea (Pol. Lanbarren), 9 20180 Oiartzun Spain) dat het toestel toegangscontroleapparatuur in overeenstemming is met de essentile eisen en de andere relevante bepalingen van richtlijn 2014/53/EU (RED) en 2011/65/EU (RoHS). U kunt een kopie van de originele verklaring van overeenstemming vinden op het volgende internetadres: http://www.saltosystems.com/certificate PT A SALTO Systems S.L. declara que este equipamento de controlo de acessos est conforme os requisitos essenciais e outras disposies da Diretiva 2014/53/UE (RED) e 2011/65/EU (RoHS). Poder encontrar uma cpia da declarao de conformidade original na seguinte direo de internet: http://www.saltosystems.com/certificate ELECTRICAL WARNINGS This device must be powered by an external Limited Power Source, in compliance with the clause 2.5 of the standard IEC 60950-1. FRECUENCY / OUTPUT MAXIMUM POWER TECHNOLOGY Bluetooth Smart IEEE802.15.4 Wifi MECHANICAL WARNINGS OPERATING FRECUENCY 2400 2483.5 MHz 2400 2483.5 MHz 2412 2462 MHz OUTPUT MAX. POWER

+8 dBm / + 2.8 dBm

+5 dBm

+19 dBm In order to confirm the correct operation of this electronic device, SALTO recommends using it in combination with a lock destined for that use (door mass, frequency of use, fire door, etc) and that is in good operational conditions. The SALTO product should be treated with care during the installation process to avoid any aggressive contact that may damage the unit. It may be necessary to loosen the trims mounting during installation. Do not bring the device into contact with oil, paints or acids. Do not paint the door with the mortise lock or electronic device already mounted on the door. CLEANING THE ELECTRONIC DEVICE: a damp cloth with mild soapy water can be used. Never use abrasive soaps or sprays. For best performance, stainless steel should be cleaned regularly. Note that when the door is closed without the lock having been already programmed, the lock will automatically lock and can only be opened with a Portable Programing Device (PPD). If you have questions or doubts on this, please contact your authorized SALTO supplier. LEGAL WARNINGS The user shall be responsible for the correct use and maintenance of the access control equipment according to the instructions herein. SALTO shall not be responsible for any defect, malfunction, loss or damage, whether direct or indirect, caused by or arisen from any improper installation or utilization of the equipment or which contravenes, transgresses or infringes in any manner the abovementioned instructions. SALTOs liability concerning the equipment is limited to the warranty provided. The warranty does not cover product failures due to repairs, modifications or product manipulations performed in the access control equipment or in the inner electromechanical structure by anyone other than authorized SALTO dealers or personnel. SALTO SYSTEMS S.L. www.saltosystems.com 1/2 xxxxxx-ED.-07/02/2018 Pol. Lanbarren, c/Arkotz n9, 20180 Oiartzun, Spain. All contents current at time of publication. SALTO Systems S.L. reserves the right to change availability of any item in this catalog, its design, construction, and/or materials. Compliance FCC COMPLIANCE STATEMENT This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. CANADIAN COMPLIANCE STATEMENT This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. Le prsent appareil est conforme aux CNR dIndustrie Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes:

(1) lappareil ne doit pas produire de brouillage, et (2) lutilisateur de lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. This device has been tested and found to comply with the limits for a Class B digital device, pursuant to ICES-003. SALTO SYSTEMS S.L. www.saltosystems.com 2/2 xxxxxx-ED.-07/02/2018 Pol. Lanbarren, c/Arkotz n9, 20180 Oiartzun, Spain. All contents current at time of publication. SALTO Systems S.L. reserves the right to change availability of any item in this catalog, its design, construction, and/or materials.

Eng E D F P Installation guide Gua de instalacin Montageanleitung Guide d'installation Guia de instalao Installation guide IQ2.0 SP225764 146

(5-3/4") 30

(1-316") 6 4 1

4

3

5

(x2)

(x2) Model: IQ223, IQ224 Installation Instalacin Installation Installation Instalao Eng Not included/ No incluido Nicht enthalten Non inclus / No incluso D E P F 1 PZ2 a 2-a b 2-b ETHERNET + CELLULAR MODEL 3-a Plug Conectar Verbinden Branchez Conectar ETHERNET + WIFI MODEL a ETHERNET + CELLULAR MODEL b ETHERNET + WIFI MODEL c ETHERNET + POE MODEL d ETHERNET MODEL

( )Not included/ No incluido/ Nicht enthalten/ Non inclus/ No incluso

4-a Plug Conectar Verbinden Branchez Conectar 1 2 Plug Conectar Verbinden Branchez Conectar 3-b Plug Conectar Verbinden Branchez Conectar 1 2 Plug Conectar Verbinden Branchez Conectar All contents current at time of publication. SALTO Systems S.L. reserves the right to change availability of any item in this catalog, its design, construction, and/or materials. 2020 SALTO Systems S.L. 1/4 225452-ED1.-30/06/2021 Installation guide IQ2.0 c c 2-c d 2-d ETHERNET + POE MODEL 3-c Plug Conectar Verbinden Branchez Conectar ETHERNET MODEL 3-d Plug Conectar Verbinden Branchez Conectar 4-d Plug Conectar Verbinden Branchez Conectar Plug Conectar Verbinden Branchez Conectar IQ 2.0 SUPPORT SP225764 Plug Conectar Verbinden Branchez Conectar For installations on metal surfaces Para instalaciones sobre superficies metlicas Fr die Montage auf Metalloberflchen Pour installations sur des surfaces mtalliques Para instalaes em superfcies metlicas TORX 20 Not included / No incluido / Nicht enthalten / Non inclus No incluso TORX 20 SUPPORT 5 4 1 0 1 All contents current at time of publication. SALTO Systems S.L. reserves the right to change availability of any item in this catalog, its design, construction, and/or materials. 2020 SALTO Systems S.L. 2/4 225452-ED1.-30/06/2021 Installation guide IQ2.0 1 Eng E D F P Electrical features Caractersticas elctricas Electrische espezifikationen Caracteristiques electriques Caractersticas elctricas OPERATION CONDITIONS OTHER CHARACTERISTICS:

Temperature Min 0 Max 40 Unit C WIFI IEEE 802.11 b/g/n radio 2.4 Ghz RF CHARACTERISTICS Frequency Range RF Standard Indoor Radio Range 2405-2480 Mhz (ISM band) IEEE 802.15.4 7m*

(*) Depending upon installed environment. POWER SUPPLY CHARACTERISTICS

(To be fed only by an official SALTO Power Supply adapter) Input Voltage Max Current 12 800 Unit V mA BLE Bluetooth 4.2 Compliant Integrated antenna TX power: up to +8dBm RX sensitivity: down to -92dBm

Indoor range: 10-15m

(*) Depending upon installed environment.

(PoE + WiFi variant might suffer range reduction of up to 30%). POE The POE connection complies to IEEE 802.3af

(max 15.40W, also known as 802.3a Type 1) To ensure a correct operation, do not install the device near a metallic surface. Para asegurar un correcto funcionamiento, no instalar el dispositivo cerca de una superficie metlica. Um einen einwandfreien Betrieb zu gewhrleisten, installieren Sie das Gert dann nicht in der Nhe von einer metallischen Oberflche. Pour assurer un fonctionnement correct, ninstallez pas lappareil prs dune surface mtallique. Para assegurar o funcionamento adequado, no instale o aparelho perto de uma superfcie de metal All contents current at time of publication. SALTO Systems S.L. reserves the right to change availability of any item in this catalog, its design, construction, and/or materials. 2020 SALTO Systems S.L. 3/4 225452-ED1.-30/06/2021 LED Signals IQ2.0 LED MODE LED COLOUR STATUS INDICATION Blink BLUE twice Blink long BLUE Blink RED GREEN BLUE Blink short BLUE Normal Power Up Software reset Factory reset IQ2.0 firmware update Blink short GREEN (2 minutes) Until BLE connection is established Blink long GREEN Blink short RED Blink long PURPLE Permanent WHITE BLE connection is established No connection to the cloud Not valid subscription found Factory mode All contents current at time of publication. SALTO Systems S.L. reserves the right to change availability of any item in this catalog, its design, construction, and/or materials. 2020 SALTO Systems S.L. 4/4 225452-ED1.-30/06/2021

Compliance PRODUCTS DESCRIPTION PRODUCT TECHNOLOGY POWER SUPPLY SOFTWARE COMMERCIAL NAME MODEL BLUETOOTH LE WIFI IEEE802.15.4 12V PoE CONTROL RF2 MODULE BLUETOOTH LE MODULE IQ2.0 IQ212 IQ213 IQ214 IQ222 IQ223 IQ224 x x x x x x x x EU COMPLIANCE STATEMENT x x x x x x CCCPROD x CCCPROD CCCPROD CCCPROD 0091 x CCCPROD 0091 CCCPROD 0091

x x x EN Hereby, SALTO Systems S.L. (Arkotz Kalea (Pol. Lanbarren), 9 20180 Oiartzun Spain), declares that this access control equipment is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU (RED) and 2011/65/EU (RoHS). You will be able to find a copy of the original declaration of conformity at the following Internet address: https://www.saltosystems.com/certificate ES Por medio de la presente SALTO Systems S.L. (Arkotz Kalea (Pol. Lanbarren), 9 20180 Oiartzun Spain) declara que este equipo de control de accesos cumple con los requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 2014/53/UE (RED) y 2011/65/UE (RoHS). Podr encontrar una copia de la declaracin de conformidad original en internet:

https://www.saltosystems.com/certificate la siguiente direccin de FR Par la prsente SALTO Systems S.L. (Arkotz Kalea (Pol. Lanbarren), 9 20180 Oiartzun Spain) dclare que lappareil quipement pour le contrle daccs est conforme aux exigences essentielles et aux autres dispositions pertinentes de la directive 2014/53/UE (RED) et 2011/65/UE (RoHS). Vous pouvez tlcharger une copie de la dclaration de conformit originale travers ladresse suivante: https://www.saltosystems.com/certificate DE Hiermit erklrt SALTO Systems S.L. (Arkotz Kalea (Pol. Lanbarren), 9-20180 Oiartzun-Spain) dass sich das Gert Zutrittskontrollgerte im bereinstimmung mit den grundlegendenAnforderungen und den brigen einschlgigen Bestimmungen derRichtlinie 2014/53/EU (RED) befindet und 2011/65/EU Internetseite:

https://www.saltosystems.com/certificate originalen Konformittserklrung

(RoHS). Eine folgenden finden Kopie Sie der der auf NL Hierbij verklaart SALTO Systems S.L. (Arkotz Kalea (Pol. Lanbarren), 9 20180 Oiartzun Spain) dat het toestel toegangscontroleapparatuur in overeenstemming is met de essentile eisen en de andere relevante bepalingen van richtlijn 2014/53/EU (RED) en 2011/65/EU (RoHS). U kunt een kopie van de originele verklaring van overeenstemming vinden op het volgende internetadres: https://www.saltosystems.com/certificate PT A SALTO Systems S.L. declara que este equipamento de controlo de acessos est conforme os requisitos essenciais e outras disposies da Diretiva 2014/53/UE (RED) e 2011/65/EU (RoHS). Poder encontrar uma cpia da declarao de conformidade original na seguinte direo de internet:

https://www.saltosystems.com/certificate UKCA DECLARATION OF CONFORMITY Hereby, SALTO Systems S.L. (Arkotz Kalea (Pol. Lanbarren), 9 20180 Oiartzun Spain), declares that this access control equipment is in compliance with the essential requirements and other relevant provisions of The Radio Equipment Regulations 2017 and RoHS Regulation 2012. You will be able to find a copy of the original declaration of conformity at the following Internet address: https://www.saltosystems.com/certificate UK importer contact information:

Salto Systems, Ltd. Unit 1, The Court Holywell Business Park, Northfield Road, CV47 0FS Southam, UK. ELECTRICAL WARNINGS EN This device must be powered by a power supply classified ES1 and PS2 according to IEC/EN/UL/ 62368-1 & AS/NZS 62368.1. Distance between this device and human body must be higher than 20 cm. FR Cet appareil doit tre mis sous tension par une alimentation classe ES1 et PS2 selon IEC/EN/UL 62368-1 et AS/NZS 62368.1. La distance entre cet appareil et le corps humain doit tre suprieure 20 cm. ES Este equipo debe alimentarse por una fuente de alimentacin clasificada como ES1 y PS2 segn IEC/EN/UL 62368-1 & AS/NZS 62368.1. La distancia entre este dispositivo y el cuerpo humano debe ser mayor de 20 cm. FRECUENCY / OUTPUT MAXIMUM POWER TECHNOLOGY Bluetooth LE IEEE802.15.4 Wifi OPERATING FRECUENCY OUTPUT MAX. POWER 2400 2483.5 MHz 2400 2483.5 MHz 2400 2483.5 MHz

+6 dBm

+5 dBm

+17 dBm MECHANICAL WARNINGS The environmental conditions mentioned in the data sheets are always referred to non-condensation situations. The SALTO product should be treated with care during the installation process to avoid any aggressive contact that may damage the unit. If you have questions or doubts on this, please contact your authorized SALTO supplier. SALTO SYSTEMS S.L. www.saltosystems.com Pol. Lanbarren, c/Arkotz n9, 20180 Oiartzun, Spain. All contents current at time of publication. SALTO Systems S.L. reserves the right to change availability of any item in this catalog, its design, construction, and/or materials. 226183-ED.3-20/10/2022 1/2 Compliance LEGAL WARNINGS The user shall be responsible for the correct use and maintenance of the access control equipment according to the instructions herein. SALTO shall not be responsible for any defect, malfunction, loss or damage, whether direct or indirect, caused by or arisen from any improper installation or utilization of the equipment or which contravenes, transgresses or infringes in any manner the above mentioned instructions. SALTOs liability concerning the equipment is limited to the warranty provided. The warranty does not cover product failures due to repairs, modifications or product manipulations performed in the access control equipment or in the inner electromechanical structure by anyone other than authorized SALTO dealers or personnel. FCC COMPLIANCE STATEMENT This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This product is a radio transmitter and receiver to be used in mobile conditions. Supplier's Declaration of Conformity 47 CFR 2.1077 Compliance Information We, SALTO Systems, S.L., hereby declare that the equipment bearing the model number specified above was tested conforming to the applicable FCC Rules. Responsible Party U.S. Contact Information Salto Systems Inc. USA 1780 Corporate Drive, Suite 400 Norcross, GA 30093 v.kourelos@saltosystems.com ISED COMPLIANCE STATEMENT This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. Le prsent appareil est conforme aux CNR dIndustrie Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes: (1) lappareil ne doit pas produire de brouillage, et (2) lutilisateur de lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. Distance between 10088A-IQ2 and human body must be higher than 20 cm. Distance entre le 10088A-IQ2 et le corps humain doit tre suprieure 20 cm. This device has been tested and found to comply with the limits for a Class B digital device, pursuant to ICES-003. IMDA COMPLIANCE LABEL SALTO SYSTEMS S.L. www.saltosystems.com Pol. Lanbarren, c/Arkotz n9, 20180 Oiartzun, Spain. All contents current at time of publication. SALTO Systems S.L. reserves the right to change availability of any item in this catalog, its design, construction, and/or materials. 226183-ED.3-20/10/2022 2/2

Installation guide IQ2.0 146

(5-3/4") 30

(1-316") 6 4 1

/

)

"

4 3

-

5

(

Eng E D F P Installation guide Gua de instalacin Montageanleitung Guide d'installation Guia de instalao

(x2)

(x2) Installation Instalacin Installation Installation Instalao Eng 1 ETHERNET + CELLULAR MODEL a b D E P F ETHERNET + WIFI MODEL PZ2 a 2-a b 2-b ETHERNET + CELLULAR MODEL 3-a Plug Conectar Verbinden Branchez Conectar ETHERNET + WIFI MODEL c ETHERNET + POE MODEL d ETHERNET MODEL

*

*

*

( )Not included/ No incluido/ Nicht enthalten/ Non inclus/ No incluso 4-a Plug Conectar Verbinden Branchez Conectar 1 2 Plug Conectar Verbinden Branchez Conectar 3-b Plug Conectar Verbinden Branchez Conectar 1 2 Plug Conectar Verbinden Branchez Conectar All contents current at time of publication. SALTO Systems S.L. reserves the right to change availability of any item in this catalog, its design, construction, and/or materials. 2017 SALTO Systems S.L. 225452-ED.- -08/03/2017 1/2 Installation guide IQ2.0 c 2-c d 2-d ETHERNET + POE MODEL 3-c Plug Conectar Verbinden Branchez Conectar ETHERNET MODEL 3-d Plug Conectar Verbinden Branchez Conectar Eng E D F P Electrical features Caractersticas elctricas Electrische espezifikationen Caracteristiques electriques Caractersticas elctricas Plug Conectar Verbinden Branchez Conectar 4-d Plug Conectar Verbinden Branchez Conectar Plug Conectar Verbinden Branchez Conectar OPERATION CONDITIONS OTHER CHARACTERISTICS:

Temperature Min 0 2.4 Ghz RF CHARACTERISTICS Max 40 Unit C Frequency Range RF Standard Indoor Radio Range 2405-2480 Mhz (ISM band) IEEE 802.15.4 7m POWER SUPPLY CHARACTERISTICS

(Only for use with KSs power supply) Input Voltage Max Current 12 800 Unit V mA WIFI IEEE 802.11 b/g/n radio BLE Bluetooth 4.2 Compliant Integrated antenna TX power: up to +8dBm RX sensitivity: down to -92dBm Range: up to 200 meters POE The POE connection complies to IEEE 802.3af

(max 15.40W, also known as 802.3a Type 1) To ensure a correct operation, do not install the device near a metallic surface. Para asegurar un correcto funcionamiento, no instalar el dispositivo cerca de una superficie metlica. Um einen einwandfreien Betrieb zu gewhrleisten, installieren Sie das Gert dann nicht in der Nhe von einer metallischen Oberflche. Pour assurer un fonctionnement correct, ninstallez pas lappareil prs dune surface mtallique. Para assegurar o funcionamento adequado, no instale o aparelho perto de uma superfcie de metal All contents current at time of publication. SALTO Systems S.L. reserves the right to change availability of any item in this catalog, its design, construction, and/or materials. 2017 SALTO Systems S.L. 225452-ED.- -08/03/2017 2/2

Product marking IQ2.0 IQ2.0 IQ2.0 IQ223, IQ224 Product marking Version Date 2.0 Changes Author 11/10/2022 First edition with BGM220. Previous edition saved in 9-Histrico M.U. SALTO confidential. Do not copy or distribute without permission from SALTO Systems. 1 Product marking IQ2.0 Table of contents 1 IQ223 ..................................................................................................................................................... 3 Trademark ................................................................................................................................................. 3 CE type ...................................................................................................................................................... 3 Label .......................................................................................................................................................... 4 2 IQ224 ..................................................................................................................................................... 8 Trademark ................................................................................................................................................. 8 CE type ...................................................................................................................................................... 8 Label .......................................................................................................................................................... 9 SALTO confidential. Do not copy or distribute without permission from SALTO Systems. 2 Product marking IQ2.0 This equipment contains several markings to ensure traceability and fulfilment of the marking requirements established by international regulations. In this product, the marking information is divided into three categories: trademark, CE type and label. The information contained slightly varies for each electronic model. 1 IQ223 Trademark The manufacturers name, SALTO, is marked on the front enclosure. The trademark is visible to the final user. CE type The CE type reference of this equipment is IQ2.0 and it is marked on the label located on the rear side of the equipment. The CE type is common for all electronic models of this product family. It is visible even after installation allowing the identification of the product when it is installed as intended. This item number is also used as SALTO confidential. Do not copy or distribute without permission from SALTO Systems. 3 Product marking IQ2.0 an identifier on the EU Declaration of Conformity. Together with the electronic model (marked on the label) is used for the traceability of the equipment. Label There are two labels attached to this product. One label is located on the middle cover and the other is located on the rear side of the equipment. The labels contains the following information:

SALTO confidential. Do not copy or distribute without permission from SALTO Systems. 4 Product marking IQ2.0 SALTO confidential. Do not copy or distribute without permission from SALTO Systems. 5 Product marking IQ2.0 SALTO confidential. Do not copy or distribute without permission from SALTO Systems. 6 Product marking IQ2.0 SALTO confidential. Do not copy or distribute without permission from SALTO Systems. 7 Product marking IQ2.0 2 IQ224 Trademark The manufacturers name, SALTO, is marked on the front enclosure. The trademark is visible to the final user. CE type The CE type reference of this equipment is IQ2.0 and it is marked on the label located on the rear side of the equipment. The CE type is common for all electronic models of this product family. It is visible even after installation allowing the identification of the product when it is installed as intended. This item number is also used as an identifier on the EU Declaration of Conformity. Together with the electronic model (marked on the label) is used for the traceability of the equipment. SALTO confidential. Do not copy or distribute without permission from SALTO Systems. 8 Product marking IQ2.0 Label There are two labels attached to this product. One label is located on the middle cover and the other is located on the rear side of the equipment. The labels contains the following information:

SALTO confidential. Do not copy or distribute without permission from SALTO Systems. 9 Product marking IQ2.0 SALTO confidential. Do not copy or distribute without permission from SALTO Systems. 10 Product marking IQ2.0 SALTO confidential. Do not copy or distribute without permission from SALTO Systems. 11 Product marking IQ2.0 SALTO confidential. Do not copy or distribute without permission from SALTO Systems. 12

SALTO Systems, S.L. C/Arkotz 9 Pol. Lanbarren 20180 Oiartzun (Gipuzkoa) Date: April 3, 2023 DEKRA Testing and Certification, S.A.U. Parque Tecnolgico de Andaluca C/ Severo Ochoa 2 & 6 29590 Campanillas Mlaga, Espaa Class II permissive change request letter We, Salto Systems S.L., Pol. Lanbarren, C/Arkotz 9, Oiartzun, Gipuzkoa, Spain pursuant FCC 2.1043 and pursuant IC RSP-100, hereby request the evaluation of a Class II permissive change as described below for the following device. FCC ID: UKCIQ2 PMN: IQ2.0 HVIN: IQ222, IQ223, IQ224 IC-ID: 10088A-IQ2 HMN: N/A FVIN: N/A The changes made to the currently certified model is the replacement from the previous BLE module BGM111 to the new BGM220 module. In order to assemble the new BGM220 module in the PCB, following the instructions specified by module manufacturer, the IQ products have required more space on the PCB to integrate all the components from the mentioned component to operate properly, respecting former integration with BGM111 module. Along with the change from the previous BGM111 BLE module to the new BGM220 module, the PCB supplier has changed in order to secure the PCB supply chain. The manufacturing tolerances of the new manufacturer have changed compared to the old one, requiring a new tuning of the IEEE 802.15.4 interface. The new tuning resulted in a lower output power than the old board, but with greater uniformity across all units produced, guaranteeing at the same time the absence of out-of-band interference. This tuning has been achieved modifying the values from elements L31 (an inductor). Therefore, this product can be considered electrically identical to the corresponding already assessed radio module except for these replacements. Updated operational Description, test reports and Block Diagram for this model have been developed. Sincerely, __________________________ FCB011_02 //DEKRA Testing and Certification, S.A.U. // www.dekra-product-safety.com/wireless SALTO Systems, S.L. C/Arkotz 9 Pol. Lanbarren 20180 Oiartzun (Gipuzkoa) By: Borja Nieto Title: R&D Certifications Manager Company: Salto Systems S.L. Telephone: +34 617 890 394 e-mail: b.nieto@saltosystems.com FCB011_02 //DEKRA Testing and Certification, S.A.U. // www.dekra-product-safety.com/wireless

SALTO Systems, S.L. C/Arkotz 9 Pol. Lanbarren 20180 Oiartzun (Gipuzkoa) Date: March 7, 2023 DEKRA Testing and Certification, S.A.U. Parque Tecnolgico de Andaluca C/ Severo Ochoa 2 & 6 29590 Campanillas Mlaga, Espaa Ref: Agent letter for FCC ID: UKCIQ2 We, Salto Systems S.L., Pol. Lanbarren, C/Arkotz 9, Oiartzun, Gipuzkoa, Spain, hereby authorize DEKRA Testing and Certification, S.A.U , Severo Ochoa, 2 & 6, 29590 Malaga, Spain Ms. Mara Rodrguez Moyano, e-mail: maria.rodriguez@dekra.com, Phone: +34 952 619 114 to act as our agent in the preparation of this application for equipment certification, including the signing of all documents relating to these matters. The present authorization considers the development of documents on behalf of the client, written under his own letterhead and related to the necessary information to be provided on his behalf to complete the certification process. We also hereby certify that neither we nor any party to this application are subject to a denial of U.S. Federal benefits, which include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, U.S.C. 862 because of conviction for possession or distribution of controlled substance. For instances where our authorized agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by DEKRA Testing and Certification, S.A.U., still resides with us. This agreement expires one year from the current date. Sincerely, __________________________ FCB011_02 //DEKRA Testing and Certification, S.A.U. // www.dekra-product-safety.com/wireless SALTO Systems, S.L. C/Arkotz 9 Pol. Lanbarren 20180 Oiartzun (Gipuzkoa) By: Borja Nieto Title: R&D Certification Manager Company: Salto Systems S.L. Telephone: +34 617 890 394 e-mail: b.nieto@saltosystems.com FCB011_02 //DEKRA Testing and Certification, S.A.U. // www.dekra-product-safety.com/wireless

SALTO Systems, S.L. C/Arkotz 9 Pol. Lanbarren 20180 Oiartzun (Gipuzkoa) Date: March 7, 2023 DEKRA Testing and Certification, S.A.U. Parque Tecnolgico de Andaluca C/ Severo Ochoa 2 & 6 29590 Campanillas Mlaga, Espaa Ref: Confidentiality request for FCC ID: UKCIQ2 To whom it may concern:

Pursuant to 0.457(d)(1)(ii) and 0.459 of the Commissions Rules (47 C.F.R.) and 552 (b)(4) of the Freedom of Information Act, Salto Systems S.L. hereby requests that a part of the subject FCC application be held confidential to avoid release of sensitive information of the product to the public. For the product stated above, we request that the following information be withheld from public disclose:

Permanent Type of Confidentiality Requested Short Term Short Term Short Term Short Term Short Term Short Term Short Term Short Term Short Term Short Term Permanent Permanent Permanent Permanent Permanent Exhibit Block Diagrams External Photos Internal Photos Operation Description Parts List & Placement/BOM Tune-Up Procedure Schematics Test Setup Photos Users Manual SDR software and security information Permanent Confidentiality:

The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to us and provide unjustified benefits to our competitors. Short-Term Confidentiality:

We hereby request short-term confidentiality for the product stated above to avoid premature release of sensitive information prior to marketing or release of the product to the public. Release date of short term confidentiality is:

45 days from grant date marked 90 days from grant date marked 135 days from grant date marked 180 days from grant date marked Specific date:

We are also aware that we are responsible to notify DEKRA in the event information regarding the product or the product is made available to the public. DEKRA will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-1705. FCB012_05 //DEKRA Testing and Certification, S.A.U. // www.dekra-product-safety.com/wireless Sincerely, SALTO Systems, S.L. C/Arkotz 9 Pol. Lanbarren 20180 Oiartzun (Gipuzkoa) __________________________ By: Borja Nieto Title: R&D Certification Manager Company: Salto Systems S.L. Telephone: +34 617 890 394 e-mail: b.nieto@saltosystems.com FCB012_05 //DEKRA Testing and Certification, S.A.U. // www.dekra-product-safety.com/wireless

SALTO Systems, S.L. C/Arkotz 9 Pol. Lanbarren 20180 Oiartzun (Gipuzkoa) Date: March 7, 2023 DEKRA Testing and Certification, S.A.U. Parque Tecnolgico de Andaluca C/ Severo Ochoa 2 & 6 29590 Campanillas Mlaga, Espaa Ref: sDoC declaration letter for equipment with FCC ID: UKCIQ2 Pursuant to 15.101 of the Commissions Rules (47 C.F.R.), SALTO SYSTEMS S.L. hereby declare that the device above mentioned is classified under the following equipment class/classes:

JAB JAD JAV JBP JBC CXX CRR CYY HID Part 15 Class B Digital Device Part 15 Class A Digital Device Other Non-Digital SDoC Devices Part 15 Class B Computing Device/Personal Computer Part 15 Class B Computing Device/Personal Computer Communications Rcvr for use w/ licensed Tx and CBs Superregenerative Receiver Communications Receiver used w/Pt 15 Transmitter Part 15 TV Interface Device And will follow the Authorization procedure Suppliers Declaration of Conformity prior to the initiation of marketing. Sincerely, __________________________ By: Borja Nieto Title: R&D Certification Manager Company: Salto Systems S.L. FCB034_00 //DEKRA Testing and Certification, S.A.U. // www.dekra-product-safety.com/wireless Telephone: +34 617 890 394 e-mail: b.nieto@saltosystems.com SALTO Systems, S.L. C/Arkotz 9 Pol. Lanbarren 20180 Oiartzun (Gipuzkoa) FCB034_00 //DEKRA Testing and Certification, S.A.U. // www.dekra-product-safety.com/wireless

SALTO Systems, S.L. C/Arkotz 9 Pol. Lanbarren 20180 Oiartzun (Gipuzkoa) Date: March 7, 2023 DEKRA Testing and Certification, S.A.U. Parque Tecnolgico de Andaluca C/ Severo Ochoa 2 & 6 29590 Campanillas Mlaga, Espaa Certifications concerning covered equipment. Section 2.911(d)(5)(i)- (ii) FCC ID: UKCIQ2 We, Salto Systems S.L., Pol. Lanbarren, C/Arkotz 9, Oiartzun, Gipuzkoa, Spain; certify that:

the equipment for which authorization is sought is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing covered equipment. Sincerely, __________________________ By: Borja Nieto Title: R&D Certification Manager Company: Salto Systems S.L. Telephone: +34 617 890 394 e-mail: b.nieto@saltosystems.com FCB045_00 //DEKRA Testing and Certification, S.A.U. // www.dekra-product-safety.com/wireless