FCC ID: UKCIQ3M0B1 IQ3 Mini

Compliance PRODUCTS DESCRIPTION PRODUCT TECHNOLOGY SOFTWARE COMMERCIAL NAME MODEL BLUETOOTH LE 24002483.5 MHz Output max. power WIFI 2400-2483.5 MHz Output max. power CONTROL CIRCUIT BLUETOOTH LE MODULE IQ3.0 P2030 IQ3.0 Mini P2336 BLUEnet Door Controller P2029 IQ302 IQ303

+6 dBm

+6 dBm

+16 dBm IQ3M0B1

+6 dBm

+15 dBm 0171 0171 0210 0208 0208 CUC1B0

+6 dBm 0160 0208 EU DECLARATION OF CONFORMITY SoC FUS Bluetooth LE Stack WIFI MODULE 0191 0186 0187 0211 EN Hereby, SALTO Systems S.L. (Arkotz Kalea (Pol. Lanbarren), 9 20180 Oiartzun Spain), declares that this access control equipment is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU (RED) and 2011/65/EU (RoHS). You will be able to find a copy of the original declaration of conformity at the following Internet address: https://www.saltosystems.com/certificate ES Por medio de la presente SALTO Systems S.L. (Arkotz Kalea (Pol. Lanbarren), 9 20180 Oiartzun Spain) declara que este equipo de control de accesos cumple con los requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 2014/53/EU (RED) y internet:

2011/65/UE (RoHS). Podr encontrar una copia de https://www.saltosystems.com/certificate la declaracin de conformidad original en la siguiente direccin de FR Par la prsente SALTO Systems S.L. (Arkotz Kalea (Pol. Lanbarren), 9 20180 Oiartzun Spain) dclare que lappareil quipement pour le contrle daccs est conforme aux exigences essentielles et aux autres dispositions pertinentes de la directive 2014/53/EU (RED) et 2011/65/UE (RoHS). Vous pouvez tlcharger une copie de la dclaration de conformit originale travers ladresse suivante: https://www.saltosystems.com/certificate DE Hiermit erklrt SALTO Systems S.L. (Arkotz Kalea (Pol. Lanbarren), 9-20180 Oiartzun-Spain) dass sich das Gert Zutrittskontrollgerte im bereinstimmung mit den grundlegendenAnforderungen und den brigen einschlgigen Bestimmungen derRichtlinie 2014/53/EU (RED) befindet und 2011/65/EU Internetseite:

https://www.saltosystems.com/certificate Konformittserklrung folgenden originalen

(RoHS). finden Kopie Eine der Sie der auf NL Hierbij verklaart SALTO Systems S.L. (Arkotz Kalea (Pol. Lanbarren), 9 20180 Oiartzun Spain) dat het toestel toegangscontroleapparatuur in overeenstemming is met de essentile eisen en de andere relevante bepalingen van richtlijn 2014/53/EU (RED) en 2011/65/EU (RoHS). U kunt een kopie van de originele verklaring van overeenstemming vinden op het volgende internetadres: https://www.saltosystems.com/certificate PT A SALTO Systems S.L. declara que este equipamento de controlo de acessos est conforme os requisitos essenciais e outras disposies da Diretiva 2014/53/EU (RED) e 2011/65/UE (RoHS). Poder encontrar uma cpia da declarao de conformidade original na seguinte direo de internet:

https://www.saltosystems.com/certificate UKCA DECLARATION OF CONFORMITY Hereby, SALTO Systems S.L. (Arkotz Kalea (Pol. Lanbarren), 9 20180 Oiartzun Spain), declares that this access control equipment is in compliance with the essential requirements and other relevant provisions of The Radio Equipment Regulations 2017 and RoHS Regulation 2012. You will be able to find a copy of the original declaration of conformity at the following Internet address: https://www.saltosystems.com/certificate UK importer contact information:

Salto Systems, Ltd. Unit 1, The Court Holywell Business Park, Northfield Road, CV47 0FS Southam, UK. ELECTRICAL WARNINGS EN The device must be powered by a power supply classified ES1 and PS2 according IEC/EN/UL 62368-1 & AS/NZS 62368.1. Note 1: IQ303 must be powered by a PoE or by a power supply classified as ES1 and PS2 according IEC/EN/UL 62368-1 & AS/NZS 62368.1 Distance between this device and human body must be higher than 20 cm. FR Lappareil doit tre aliment par une alimentation classe ES1 et PS2 en accord avec IEC/EN//UL 62368-1 et AS/NZS 62368.1. Note 1: IQ303 doit tre aliment par PoE ou par une alimentation classe ES1 et PS2 en accord avec IEC/EN/UL 62368-1 & AS/NZS 62368.1 Le distance entre cet appareil et le corps humain doit tre suprieure 20 cm. ES Este equipo debe alimentarse por una fuente de alimentacin clasificada como ES1 y PS2 segn IEC/EN/UL 62368-1 & AS/NZS 62368.1. Nota 1: IQ303 debe alimentarse por un PoE o por una fuente de alimentacin clasificada como ES1 y PS2 segn IEC/EN/UL 62368-1 &

AS/NZS 62368.1 La distancia entre este dispositivo y el cuerpo humano debe ser mayor de 20 cm. MECHANICAL WARNINGS The environmental conditions mentioned in the data sheets are always referred to non-condensation situations. The SALTO product should be treated with care during the installation process to avoid any aggressive contact that may damage the unit. Do not bring the device into contact with oil, paints or acids. If you have questions or doubts on this, please contact your authorized SALTO supplier. LEGAL WARNINGS The user shall be responsible for the correct use and maintenance of the access control equipment according to the instructions herein. SALTO shall not be responsible for any defect, malfunction, loss or damage, whether direct or indirect, caused by or arisen from any improper installation or utilization of the equipment or which contravenes, transgresses or infringes in any manner the above mentioned instructions. SALTOs liability concerning the equipment is limited to the warranty provided. The warranty does not cover product failures due to repairs, modifications or product manipulations performed in the access control equipment or in the inner electromechanical structure by anyone other than authorized SALTO dealers or personnel. SALTO SYSTEMS S.L. www.saltosystems.com Pol. Lanbarren, c/Arkotz n9, 20180 Oiartzun, Spain. All contents current at time of publication. SALTO Systems S.L. reserves the right to change availability of any item in this catalog, its design, construction, and/or materials. 226742-ED.3-17/03/2023 1/2 Compliance FCC COMPLIANCE STATEMENT This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This product is a radio transmitter and receiver to be used in mobile conditions. Supplier's Declaration of Conformity 47 CFR 2.1077 Compliance Information We, SALTO Systems, S.L., hereby declare that the equipment bearing the model number specified above was tested conforming to the applicable FCC Rules. Responsible Party U.S. Contact Information Salto Systems Inc. USA. 1780 Corporate Drive, Suite 400. Norcross, GA 30093. v.kourelos@saltosystems.com ISED COMPLIANCE STATEMENT This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. Le prsent appareil est conforme aux CNR dIndustrie Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes: (1) lappareil ne doit pas produire de brouillage, et (2) lutilisateur de lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. This device has been tested and found to comply with the limits for a Class B digital device, pursuant to ICES-003. MIC CERTIFICATION INFORMATION [1]

Legend:

[1] MIC Remarks:

Applicable for CUC1B0 SALTO SYSTEMS S.L. www.saltosystems.com Pol. Lanbarren, c/Arkotz n9, 20180 Oiartzun, Spain. All contents current at time of publication. SALTO Systems S.L. reserves the right to change availability of any item in this catalog, its design, construction, and/or materials. 226742-ED.3-17/03/2023 2/2

Eng E F Installation guide Gua de instalacin Guide d'installation 69g The IQ3 Mini is a Gateway device that ensures the comunnication between Nebula and the SALTO BLUEnet devices providing the SVN (SALTO Virtual Network) features. It is equipped with a WIFI and Bluetooth interface. Installation Eng E IQ3 Mini Installation guide O 53 32 F IQ3Mxx.. series

*Corresponding power supply. Use provided power supply and USB wire!

Utilizar fuente de alimentacin y cable USB suministrados!

A2 A3 B2 A A1 B B1 B3 All contents current at time of publication. SALTO Systems S.L. reserves the right to change availability of any item in this catalog, its design, construction, and/or materials. 2023 SALTO Systems S.L. MODEL: ELECTRONIC INFO. IQ3M0B1 227723-ED.-24/04/2023 DRAFT Electrical Features Eng IQ3 Mini Installation guide Eng EXTERNAL POWER SUPPLY CHARACTERISTICS Min 4V4 5w Max 5V5 Typ 5V Input Voltage Wall adapter power Current Consumption 300mA 60mA Eng OPERATING CONDITIONS Temperature Humidity Min 0C 0 Max 60C 95% (Non condensing) Eng Eng Eng CABLE REQUIREMENTS max. 1,5m MAX. NUMBER OF DEVICES TO BE CONNECTED Access points 4 Configuration Eng Eng WIFI CHARACTERISTICS Frecuency Range Standard TX power Range 2400 MHz to 2483.5 MHz IEEE 802.11b/g/n compliant 18dBm 25-30m *

* Depending upon installed environment. To ensure correct operation, do not install the device near a metallic surface. Eng SALTO BLUEnet CHARACTERISTICS 2400 MHz to 2483.5 MHz Bluetooth 4.2 Compliant 6dBm 5-10m *

Frecuency Range Standard TX power Indoor Range

* Depending upon installed environment. To enure correct operation, do not install the device near a metallic surface. The device is configured using the Nebula App. The Nebula App is responsible for commissioning the device, providing the necessary data and keys to connect to the Wifi network of the installation. Installation Example Eng Salto's Software Router Wifi Wifi IQ3 Mini Bluetooth LE All contents current at time of publication. SALTO Systems S.L. reserves the right to change availability of any item in this catalog, its design, construction, and/or materials. 2023 SALTO Systems S.L. 227723-ED.-24/04/2023 DRAFT IQ3 Mini Installation guide LED COLOUR COLOR DE LED FARBE COULEUR COR STATUS INDICATION iNDICACION DE ESTATUS STATUS TAT ESTADO Device ex works. It will be doing advertising. Dispositivo en fbrica. Estar haciendo advertising. Gert ab werk. Bereit zur Anmeldung. Le despositif ex fonctionne. Il fera de la publicit. O dispositivo em ex-work. ra iniciar o mode de publicidade. Identification signal when selected from a mobile phone. The signal lasts 3 second. Seal de identificacin al seleccionarlo desde un mvil. La seal dura 3 segundos. Identifikationssignal bei Auswahl von einem Mobiltelefon. Das Signal dauert 3 Sekunden. Signal d'identification lors de la slection partir d'un tlphone mobile. Le signal dure 3 secondes. Sinal de identificao quando selecionado a partir de um telemvel. O sinal tem a durao de 3 segundos. Device initializated with communication to the server. Dispositivo inicializado con comunicacin al servidor. Gert initialisiert und kommuniziert mit Server. Dispositif initialis avec la comunication au serveur. Dispositivo inicializado com comunicao para servidor. Device not communicating with the server. Dispositivo sin comunicacin con el servidor. Gert kommuniziert nicht mit dem Server. Le desposif ne communique pas a verc le serveur. Dispositivo no est a comunicar com o servidor. Connection established to a mobile phone. Conexin establecida a un mvil. Verdindung zu Mobiltelefon hergestellt. Connexion tablie avec un tlphone portable. Ligao estabelecida a um telemvel. Inizialized and in prigraming mode. It is doing advertising while waiting for a mobile connection. Inicializado y en modo programacin. Est haciendo advertising a la espera de conexin de un mvil. Initialisiert und im Programmiermodus. Bereit zur Anmeldung whrend auf eine Verbindumg zum Mobiletelefon gewartet wird. Initialis et en mode de programation. Il fait de la publicit tout en attendant une connexion mobile. Inicializado e em modo de programao. Est em modo de publicidade enquanto aguarda por uma liao mvel. Signalling Eng LED MODE MODO DE LED LED ANZEIGE MODE LED MODO DO LED Blink long RED Parpadeo largo-ROJO Blinken lange ROT Clignotement long ROUGE Piscar longo-VERMELHO Blink short RED (3 seconds) Parpadeo corto-ROJO (3 segundos) Blinken kurz ROT (3 seconds) Clignotement court ROUGE (3 secondes) Piscar curto-VERMELHO (3 segundos) Blink long BLUE Parpadeo largo-AZUL Blinken lange BLAU Clignotement long BLEU Piscar longo-AZUL Blink short YELLOW Parpadeo corto-AMARILLO Blinken kurz GELB Clignotement court JAUNE Piscar curto-AMARELO Blink long GREEN Parpadeo largo-VERDE Blinken lange GRN Clignotement long VERT Piscar longo-VERDE Blink short GREEN Parpadeo corto-VERDE Blinken kurz GRN Clignotement court VERT Piscar curto-VERDE Operational Test Eng Eng Wait for a long red blink. All contents current at time of publication. SALTO Systems S.L. reserves the right to change availability of any item in this catalog, its design, construction, and/or materials. 2023 SALTO Systems S.L. 227723-ED.-24/04/2023 MODEL: ELECTRONIC INFO. IQ3M0B1 DRAFT

Product marking IQ3 Mini IQ3 Mini P2336 IQ3M0B1 Product marking Changes Version Date 1.0 22/02/2023 First edition Author M.U. SALTO confidential. Do not copy or distribute without permission from SALTO Systems. 1 Product marking IQ3 Mini Table of contents 1 IQ3M0B1 ............................................................................................................................................... 3 Trademark ................................................................................................................................................. 3 CE type ...................................................................................................................................................... 3 Label .......................................................................................................................................................... 3 SALTO confidential. Do not copy or distribute without permission from SALTO Systems. 2 Product marking IQ3 Mini This equipment contains several markings to ensure traceability and fulfilment of the marking requirements established by international regulations. In this product, the marking information is divided into three categories: trademark, CE type and label. 1 IQ3M0B1 Trademark The manufacturers name, SALTO SYSTEMS, S.L., is marked on the label located at the rear side of the device. The trademark is visible to the final user. CE type The CE type reference of this equipment is P2336 and it is marked on the label located at the rear side of the device. The CE type is common for all electronic models of this product family. It is visible even after installation allowing the identification of the product when it is installed as intended. This item number is also used as an identifier on the EU Declaration of Conformity. Together with the electronic model (marked on the label) is used for the traceability of the equipment. Label The label is located at the rear side of the device. The label contains the following information:

SALTO confidential. Do not copy or distribute without permission from SALTO Systems. 3 Product marking IQ3 Mini SALTO confidential. Do not copy or distribute without permission from SALTO Systems. 4

SALTO Systems, S.L. C/Arkotz 9 Pol. Lanbarren 20180 Oiartzun (Gipuzkoa) Date: June 09, 2023 DEKRA Testing and Certification, S.A.U. Parque Tecnolgico de Andaluca C/ Severo Ochoa 2 & 6 29590 Campanillas Mlaga, Espaa Ref: Agent letter for FCC ID: UKCIQ3M0B1 We, hereby authorize Salto Systems S.L., Pol. Lanbarren, C/Arkotz 9, Oiartzun, Gipuzkoa, Spain, DEKRA Testing and Certification, S.A.U , Severo Ochoa, 2 & 6, 29590 Malaga, Spain Ms. Mara Rodrguez Moyano, e-mail: maria.rodriguez@dekra.com, Phone: +34 952 619 114 to act as our agent in the preparation of this application for equipment certification, including the signing of all documents relating to these matters. The present authorization considers the development of documents on behalf of the client, written under his own letterhead and related to the necessary information to be provided on his behalf to complete the certification process. We also hereby certify that neither we nor any party to this application are subject to a denial of U.S. Federal benefits, which include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, U.S.C. 862 because of conviction for possession or distribution of controlled substance. For instances where our authorized agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by DEKRA Testing and Certification, S.A.U., still resides with us. This agreement expires one year from the current date. Sincerely, __________________________ FCB011_02 //DEKRA Testing and Certification, S.A.U. // www.dekra-product-safety.com/wireless SALTO Systems, S.L. C/Arkotz 9 Pol. Lanbarren 20180 Oiartzun (Gipuzkoa) By: Borja Nieto Title: R&D Certification Manager Company: Salto Systems S.L. Telephone: +34 617 890 394 e-mail: b.nieto@saltosystems.com FCB011_02 //DEKRA Testing and Certification, S.A.U. // www.dekra-product-safety.com/wireless

SALTO Systems, S.L. C/Arkotz 9 Pol. Lanbarren 20180 Oiartzun (Gipuzkoa) Date: June 09, 2023 DEKRA Testing and Certification, S.A.U. Parque Tecnolgico de Andaluca C/ Severo Ochoa 2 & 6 29590 Campanillas Mlaga, Espaa Ref: Confidentiality request for FCC ID: UKCIQ3M0B1 To whom it may concern:

Pursuant to 0.457(d)(1)(ii) and 0.459 of the Commissions Rules (47 C.F.R.) and 552 (b)(4) of the Freedom of Information Act, Salto Systems S.L. hereby requests that a part of the subject FCC application be held confidential to avoid release of sensitive information of the product to the public. For the product stated above, we request that the following information be withheld from public disclose:

Permanent Type of Confidentiality Requested Short Term Short Term Short Term Short Term Short Term Short Term Short Term Short Term Short Term Short Term Permanent Permanent Permanent Permanent Permanent Exhibit Block Diagrams External Photos Internal Photos Operation Description Parts List & Placement/BOM Tune-Up Procedure Schematics Test Setup Photos Users Manual SDR software and security information Permanent Confidentiality:

The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to us and provide unjustified benefits to our competitors. Short-Term Confidentiality:

We hereby request short-term confidentiality for the product stated above to avoid premature release of sensitive information prior to marketing or release of the product to the public. Release date of short term confidentiality is:

45 days from grant date marked 90 days from grant date marked 135 days from grant date marked 180 days from grant date marked Specific date:

We are also aware that we are responsible to notify DEKRA in the event information regarding the product or the product is made available to the public. DEKRA will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-1705. FCB012_05 //DEKRA Testing and Certification, S.A.U. // www.dekra-product-safety.com/wireless SALTO Systems, S.L. C/Arkotz 9 Pol. Lanbarren 20180 Oiartzun (Gipuzkoa) Sincerely, __________________________ By: Borja Nieto Title: R&D Certification Manager Company: Salto Systems S.L. Telephone: +34 617 890 394 e-mail: b.nieto@saltosystems.com FCB012_05 //DEKRA Testing and Certification, S.A.U. // www.dekra-product-safety.com/wireless

SALTO Systems, S.L. C/Arkotz 9 Pol. Lanbarren 20180 Oiartzun (Gipuzkoa) Date: June 09, 2023 DEKRA Testing and Certification, S.A.U. Parque Tecnolgico de Andaluca C/ Severo Ochoa 2 & 6 29590 Campanillas Mlaga, Espaa Ref: sDoC declaration letter for equipment with FCC ID: UKCIQ3M0B1 Pursuant to 15.101 of the Commissions Rules (47 C.F.R.), Salto Systems, S.L. hereby declare that the device above mentioned is classified under the following equipment class/classes:

JAB JAD JAV JBP JBC CXX CRR CYY HID Part 15 Class B Digital Device Part 15 Class A Digital Device Other Non-Digital SDoC Devices Part 15 Class B Computing Device/Personal Computer Part 15 Class B Computing Device/Personal Computer Communications Rcvr for use w/ licensed Tx and CBs Superregenerative Receiver Communications Receiver used w/Pt 15 Transmitter Part 15 TV Interface Device And will follow the Authorization procedure Suppliers Declaration of Conformity prior to the initiation of marketing. Sincerely, FCB034_00 //DEKRA Testing and Certification, S.A.U. // www.dekra-product-safety.com/wireless SALTO Systems, S.L. C/Arkotz 9 Pol. Lanbarren 20180 Oiartzun (Gipuzkoa) __________________________ By: Borja Nieto Title: R&D Certification Manager Company: Salto Systems S.L. Telephone: +34 617 890 394 e-mail: b.nieto@saltosystems.com FCB034_00 //DEKRA Testing and Certification, S.A.U. // www.dekra-product-safety.com/wireless

SALTO Systems, S.L. C/Arkotz 9 Pol. Lanbarren 20180 Oiartzun (Gipuzkoa) Date: June 09, 2023 DEKRA Testing and Certification, S.A.U. Parque Tecnolgico de Andaluca C/ Severo Ochoa 2 & 6 29590 Campanillas Mlaga, Espaa Certifications concerning covered equipment. Section 2.911(d)(5)(i)- (ii) FCC ID: UKCIQ3M0B1 We, Salto Systems S.L., Pol. Lanbarren, C/Arkotz 9, Oiartzun, Gipuzkoa, Spain; certify that:

the equipment for which authorization is sought is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing covered equipment. Sincerely, __________________________ By: Borja Nieto Title: R&D Certification Manager Company: Salto Systems S.L. Telephone: +34 617 890 394 e-mail: b.nieto@saltosystems.com FCB045_00 //DEKRA Testing and Certification, S.A.U. // www.dekra-product-safety.com/wireless