Compliance PRODUCTS DESCRIPTION PRODUCT TECHNOLOGY SOFTWARE COMMERCIAL NAME MODEL W09 W0J W0S IEEE802.15.4 24002483.5 MHz Output max. power RFID 13.56 MHz Output max. power
+25 dBm
+25 dBm BLUETOOTH LE 24002483.5 MHz Output max. power
+8 dBm
+25 dBm
+2.8 dBm XS4 Original E0102 (A) W09W
+25 dBm W0BW
+25 dBm W0JW
+25 dBm W08
+20 dBm W08W
+20 dBm
+8 dBm
+8 dBm
+5 dBm
+5 dBm
+5 dBm W0BK W0JK W0SK
+25 dBm
+25 dBm
+8 dBm
+8 dBm
+25 dBm
+2.8 dBm W0BWK
+25 dBm W0JWK
+25 dBm W40M W80M W60M W41M W61M W81M W80M W60M W81M W61M
+25 dBm
+25 dBm
+25 dBm
+22 dBm
+22 dBm
+22 dBm
+25 dBm
+25 dBm
+22 dBm
+22 dBm
+8 dBm
+8 dBm
+6 dBm
+6 dBm
+6 dBm
+6 dBm
+6 dBm
+6 dBm
+6 dBm
+6 dBm
+6 dBm
+6 dBm W61MK
+22 dBm
+6 dBm XS4 Original with Keypad E1215 (A) XS4 Original+
E2131 (A) XS4 Original+
E2131 (A) XS4 One S E2131 (A) XS4 One S E2131 (A) XS4 One S KEYPAD E2131 (A) XS4 Original i-Button E0127 (B) CONTROL READER Bluetooth LE MODULE RF2 MODULE MOTOR SoC FUS Bluetooth LE Stack 0037 0037 0126 0016/0061/
0095 0016/0095 0016 0037 0132 0133 0132 0132 0132/0140 0133 0082 0082 0132 0133 0132
+5 dBm 0016/0061 0016/0095 0016 0126
+5 dBm
+5 dBm 0016/0095 0132/0140 0133 0016 0174 0174 0174 0174 0174 0174 0174 0174 0174 0174 0190 0136
0136 0136 0136 0136
0136 0136 0038/0099 0038/0099 0038 0038 0038/0099 0038 0202 0202 0202 0202 0202 0202 0202 0202 0202 0202 0186 0186 0186 0186 0186 0186 0186 0186 0186 0186 0187 0187 0187 0187 0187 0187 0187 0187 0187 0187 0202 0186 0187 W02 0023/0024/
0025
(A) EU DECLARATION OF CONFORMITY EN Hereby, SALTO Systems S.L. (Arkotz Kalea (Pol. Lanbarren), 9 20180 Oiartzun Spain), declares that this access control equipment is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU (RED) and 2011/65/EU (RoHS). You will be able to find a copy of the original declaration of conformity at the following Internet address: https://www.saltosystems.com/certificate ES Por medio de la presente SALTO Systems S.L. (Arkotz Kalea (Pol. Lanbarren), 9 20180 Oiartzun Spain) declara que este equipo de control de accesos cumple con los requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 2014/53/UE (RED) y 2011/65/UE (RoHS). Podr encontrar una copia de internet:
https://www.saltosystems.com/certificate la declaracin de conformidad original en la siguiente direccin de FR Par la prsente SALTO Systems S.L. (Arkotz Kalea (Pol. Lanbarren), 9 20180 Oiartzun Spain) dclare que lappareil quipement pour le contrle daccs est conforme aux exigences essentielles et aux autres dispositions pertinentes de la directive 2014/53/UE (RED) et 2011/65/UE (RoHS). Vous pouvez tlcharger une copie de la dclaration de conformit originale travers ladresse suivante: https://www.saltosystems.com/certificate DE Hiermit erklrt SALTO Systems S.L. (Arkotz Kalea (Pol. Lanbarren), 9-20180 Oiartzun-Spain) dass sich das Gert Zutrittskontrollgerte im bereinstimmung mit den grundlegendenAnforderungen und den brigen einschlgigen Bestimmungen derRichtlinie 2014/53/EU (RED) befindet und Internetseite:
2011/65/EU https://www.saltosystems.com/certificate Konformittserklrung folgenden originalen
(RoHS). finden Kopie Eine der Sie der auf NL Hierbij verklaart SALTO Systems S.L. (Arkotz Kalea (Pol. Lanbarren), 9 20180 Oiartzun Spain) dat het toestel toegangscontroleapparatuur in overeenstemming is met de essentile eisen en de andere relevante bepalingen van richtlijn 2014/53/EU (RED) en 2011/65/EU (RoHS). U kunt een kopie van de originele verklaring van overeenstemming vinden op het volgende internetadres: https://www.saltosystems.com/certificate PT A SALTO Systems S.L. declara que este equipamento de controlo de acessos est conforme os requisitos essenciais e outras disposies da Diretiva 2014/53/UE (RED) e 2011/65/UE (RoHS). Poder encontrar uma cpia da declarao de conformidade original na seguinte direo de internet:
https://www.saltosystems.com/certificate
(A) UKCA DECLARATION OF CONFORMITY Hereby, SALTO Systems S.L. (Arkotz Kalea (Pol. Lanbarren), 9 20180 Oiartzun Spain), declares that this access control equipment is in compliance with the essential requirements and other relevant provisions of The Radio Equipment Regulations 2017 and RoHS Regulation 2012. You will be able to find a copy of the original declaration of conformity at the following Internet address: https://www.saltosystems.com/certificate UK importer contact information:
Salto Systems, Ltd. Unit 1, The Court Holywell Business Park, Northfield Road, CV47 0FS Southam, UK. SALTO SYSTEMS S.L. www.saltosystems.com Pol. Lanbarren, c/Arkotz n9, 20180 Oiartzun, Spain. All contents current at time of publication. SALTO Systems S.L. reserves the right to change availability of any item in this catalog, its design, construction, and/or materials. 226180-ED.5-17/03/2023 1/3 Compliance
(B) EU DECLARATION OF CONFORMITY EN Hereby, SALTO Systems S.L. (Arkotz Kalea (Pol. Lanbarren), 9 20180 Oiartzun Spain), declares that this access control equipment is in compliance with the essential requirements and other relevant provisions of Directive 2014/30/EU (EMCD), 2014/35/EU (LVD) and 2011/65/EU (RoHS). You will be able to find a copy of the original declaration of conformity at the following Internet address: https://www.saltosystems.com/certificate ES Por medio de la presente SALTO Systems S.L. (Arkotz Kalea (Pol. Lanbarren), 9 20180 Oiartzun Spain) declara que este equipo de control de accesos cumple con los requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 2014/30/UE (EMCD), 2014/35/UE (LVD) y 2011/65/UE (RoHS). Podr encontrar una copia de la declaracin de conformidad original en la siguiente direccin de internet:
https://www.saltosystems.com/certificate FR Par la prsente SALTO Systems S.L. (Arkotz Kalea (Pol. Lanbarren), 9 20180 Oiartzun Spain) dclare que lappareil quipement pour le contrle daccs est conforme aux exigences essentielles et aux autres dispositions pertinentes de la directive 2014/30/UE (EMCD), 2014/35/UE (LVD) et ladresse suivante:
2011/65/UE (RoHS). Vous pouvez https://www.saltosystems.com/certificate la dclaration de conformit originale tlcharger une copie de travers DE Hiermit erklrt SALTO Systems S.L. (Arkotz Kalea (Pol. Lanbarren), 9-20180 Oiartzun-Spain) dass sich das Gert Zutrittskontrollgerte im bereinstimmung mit den grundlegendenAnforderungen und den brigen einschlgigen Bestimmungen derRichtlinie 2014/30/EU (EMCD), 2014/35/EU (LVD) befindet und 2011/65/EU (RoHS). Eine Kopie der originalen Konformittserklrung finden Sie auf der folgenden Internetseite:
https://www.saltosystems.com/certificate NL Hierbij verklaart SALTO Systems S.L. (Arkotz Kalea (Pol. Lanbarren), 9 20180 Oiartzun Spain) dat het toestel toegangscontroleapparatuur in overeenstemming is met de essentile eisen en de andere relevante bepalingen van richtlijn 2014/30/EU (EMCD), 2014/35/EU (LVD) en 2011/65/EU
(RoHS). U internetadres:
https://www.saltosystems.com/certificate van overeenstemming van de originele vinden op het kunt een verklaring volgende kopie PT A SALTO Systems S.L. declara que este equipamento de controlo de acessos est conforme os requisitos essenciais e outras disposies da Diretiva 2014/30/UE (EMCD), 2014/35/UE (LVD) e 2011/65/UE (RoHS). Poder encontrar uma cpia da declarao de conformidade original na seguinte direo de internet: https://www.saltosystems.com/certificate
(B) UKCA DECLARATION OF CONFORMITY Hereby, SALTO Systems S.L. (Arkotz Kalea (Pol. Lanbarren), 9 20180 Oiartzun Spain), declares that this access control equipment is in compliance with the essential requirements and other relevant provisions of The Electromagnetic Compatibility Regulations 2016, The Electrical Equipment
(Safety) Regulations 2016 and RoHS Regulation 2012. You will be able to find a copy of the original declaration of conformity at the following Internet address: https://www.saltosystems.com/certificate UK importer contact information:
Salto Systems, Ltd. Unit 1, The Court Holywell Business Park, Northfield Road, CV47 0FS Southam, UK. ELECTRICAL WARNINGS EN Caution:
Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions. Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, can result in an explosion. Leaving a battery in an extremely high temperature surrounding environment can result in an explosion or the leakage of flammable liquid or gas. A battery subjected to extremely low air pressure may result in an explosion or the leakage of flammable liquid or gas. Distance between this device and human body must be higher than 20 cm. FR Attention:
Risque d'explosion si la pile est remplace par un type de pile inadquat. Jetez les piles usages conformment aux instructions. La destruction d'une pile par le feu ou dans un four haute temprature, le broyage ou encore son dcoupage mcanique peut entraner une explosion. Laisser une pile dans un environnement o la temprature est extrmement leve peut entraner une explosion, une fuite de liquide ou de gaz inflammable. Une pile soumise une pression d'air extrmement faible peut entraner une explosion, ou la fuite d'un liquide ou d'un gaz inflammable. La distance entre cet appareil et le corps humain doit tre suprieure 20 cm. ES Atencin:
Peligro de explosin si la batera se reemplaza por un tipo incorrecto. Desechar las bateras usadas siguiendo las instrucciones. Arrojar una batera al fuego o a un horno caliente, o aplastarla o cortarla mecnicamente, puede provocar una explosin. Dejar una batera en un entorno de temperatura extremadamente alta puede provocar una explosin o la fuga del lquido o gas inflamable. Una batera sometida a una presin de aire extremadamente baja puede provocar una explosin o una fuga del lquido o gas inflamable. La distancia entre este dispositivo y el cuerpo humano debe ser mayor de 20 cm. Recommended batteries:
Duracell Plus Power (AAA) LR03 MN2400 Duracell Plus Power (AA) LR6 MN1500 Duracell Ultra Power (AAA) LR03 MX2400 Varta Industrial (AA) LR6 04006 Varta Industrial (AAA) LR03 04003 Varta High Energy (AA) LR6 04906 Varta High Energy (AAA) LR03 04903 Varta Max Tech (AA) LR6 MN1500 Varta Max Tech (AAA) LR03 MN2400 Duracell Ultra Power (AAA) LR03 MX1500 MECHANICAL WARNINGS In order to confirm the correct operation of this electronic device, SALTO recommends using it in combination with a lock destined for that use (door mass, frequency of use, fire door, etc.) and that is in good operational conditions. Polished finishes are strongly recommended in seaside environments for a better performance and durability. The environmental conditions mentioned in the data sheets are always referred to non-condensation situations. The Biocote and IA finishes are painted and sharp objects such as rings or metallic key rings or other metallic objects should be avoided during any cleaning process. The SALTO product should be treated with care during the installation process to avoid any aggressive contact that may damage the unit. It may be necessary to loosen the trims mounting during installation. Do not bring the device into contact with oil, paints or acids. Do not paint the door with the mortise lock or electronic device already mounted on the door. CLEANING THE ELECTRONIC DEVICE: a damp cloth with mild soapy water can be used. Never use abrasive soaps or sprays. The black chromium finish (NE code) is coated with a protective oil that improves the product conservation. Its presence may increase the appearance of fingerprint traces after the needed product handling. Thus, no cleaning processes are applied at the origin to SALTO SYSTEMS S.L. www.saltosystems.com Pol. Lanbarren, c/Arkotz n9, 20180 Oiartzun, Spain. All contents current at time of publication. SALTO Systems S.L. reserves the right to change availability of any item in this catalog, its design, construction, and/or materials. 226180-ED.5-17/03/2023 2/3 Compliance avoid removing the protective layer. SALTO recommends cleaning the product surfaces with a damp cloth after its manipulation when the installation is finished. For best performance, stainless steel should be cleaned regularly. Note that when the door is closed without the lock having been already programmed, the lock will automatically lock and can only be opened with a Portable Programing Device (PPD). If you have questions or doubts on this, please contact your authorized SALTO supplier. LEGAL WARNINGS The user shall be responsible for the correct use and maintenance of the access control equipment according to the instructions herein. SALTO shall not be responsible for any defect, malfunction, loss or damage, whether direct or indirect, caused by or arisen from any improper installation or utilization of the equipment or which contravenes, transgresses or infringes in any manner the above mentioned instructions. SALTOs liability concerning the equipment is limited to the warranty provided. The warranty does not cover product failures due to repairs, modifications or product manipulations performed in the access control equipment or in the inner electromechanical structure by anyone other than authorized SALTO dealers or personnel. FCC COMPLIANCE STATEMENT [1]
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This product is a radio transmitter and receiver to be used in mobile conditions. Supplier's Declaration of Conformity 47 CFR 2.1077 Compliance Information We, SALTO Systems, S.L., hereby declare that the equipment bearing the model number specified above was tested conforming to the applicable FCC Rules. Responsible Party U.S. Contact Information Salto Systems Inc. USA. 1780 Corporate Drive, Suite 400. Norcross, GA. 30093. v.kourelos@saltosystems.com ISED COMPLIANCE STATEMENT [2]
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. Le prsent appareil est conforme aux CNR dIndustrie Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes: (1) lappareil ne doit pas produire de brouillage, et (2) lutilisateur de lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. This device has been tested and found to comply with the limits for a Class B digital device, pursuant to ICES-003. MIC COMPLIANCE STATEMENT [3]
FCC15 AZigbeeEMCVCCI A VCCIAFCC15 A RF2MODULEhttps://www.saltosystems.com/certificate IMDA COMPLIANCE LABEL [4]
NCC WARNING STATEMENT / NCC [5]
Legend:
[1] FCC
[2] ISED
[3] MIC
[4] IMDA
[5] NCC Remarks:
Not applicable for models W08, W08W Not applicable for models W08, W08W Not applicable for models W08, W08W, W40M, W60M, W80M, W41M, W61M, W81M, W61MK, W02 Not applicable for models W08, W08W, W02 Not applicable for models W09, W0S, W09W, W0BW, W0JW, W08, W08W, W0SK, W0BWK, W0JWK, W40M, W60M, W80M, W41M, W61M, W81M, W61MK, W02 SALTO SYSTEMS S.L. www.saltosystems.com Pol. Lanbarren, c/Arkotz n9, 20180 Oiartzun, Spain. All contents current at time of publication. SALTO Systems S.L. reserves the right to change availability of any item in this catalog, its design, construction, and/or materials. 226180-ED.5-17/03/2023 3/3