all | frequencies |
|
exhibits | applications |
---|---|---|---|---|
manual |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
Exhibit D Section 2 1033 c 3 Users manual | Users Manual | 287.00 KiB | ||||
1 | ID Label/Location Info | |||||||
1 | Schematics | |||||||
1 | Operational Description | |||||||
1 | Block Diagram | |||||||
1 | External Photos | |||||||
1 | Internal Photos | |||||||
1 | Test Report | |||||||
1 | Parts List/Tune Up Info |
1 | Exhibit D Section 2 1033 c 3 Users manual | Users Manual | 287.00 KiB |
UHF Wireless System Owners Manual AF1 Instrument Transmitter AG1 Instrument Transmitter AP1 Receiver UR1 Receiver SAMSON ENGLISH Introduction 1 QuickStart 2 Guided Tour - AP1 Receiver 4 Guided Tour - AF1 / AG1 Transmitter 7 Guided Tour - UR1 Receiver 45 Setting Up and Using Your AirLine System 9 Specifications 48 Channel Plan 50 FRANCAIS Introduction 12 Prise en main 13 Visite guide Rcepteur AP1 15 Visite guide Emetteur AF1 / AG1 18 Configuration et utilisation du systme AirLine 20 Spcifications 48 Tableau de conversion de frquence 50 Table of Contents DEUTSCHE Einleitung 23 Schneller Einstieg 24 bersicht - Empfnger AP1 26 bersicht - Sender AF1 / AG1 29 AirLine System einrichten und einsetzen 31 Technische Daten 48 Frequenzzuordnung der Empfangskanle 50 ESPANOL Introduccin 34 Arranque rpido 35 Recorrido guiado Receptor AP1 37 Recorrido guiado Transmisor AF1 / AG1 40 Ajuste y uso de su sistema AirLine 42 Especificaciones 48 Tabla de conversin de frecuencias 50 Produced by On The Right Wavelength for Samson Technologies Corp. Copyright 2000, Samson Technologies Corp. Printed September 2000 Samson Technologies Corp. 575 Underhill Blvd. P.O. Box 9031 Syosset, NY 11791-9031 Phone: 1-800-3-SAMSON (1-800-372-6766) Fax: 516-364-3888 Note: All trademarks are the property of their respective holders Introduction Samson AirLine Welcome to Samson AirLinethe wireless system for the new millenium! Wireless microphone and instrument systems were originally developed to eliminate cables, providing unparalleled freedom of movement. AirLine takes this concept to a new level with transmitters so small, lightweight and aerodynamic, they are nearly invisible, providing a completely hassle-free user experience. To create the worlds smallest wireless transmitters, we developed new proprietary technology. Featuring miniaturized circuitry and the ability to operate on a single tiny AAA battery (with 14 hours typical battery life), these transmitters also provide significantly improved wireless reception and sound quality. Whats more, the AP1 receiver developed especially for the AirLine guitar system is actually smaller than the typical wireless transmitter. E N G L I S H The Samson AirLine UHF guitar system detailed in this manual is designed to replace the cable between your electric guitar or bass and your onstage amplifier or PA mixer, freeing you to roam the stage or even visit the audience in the middle of your performance!
It operates in the uncrowded 801 - 805 MHz UHF frequency range and contains an AP1 stomp box-style receiver and either of two plug-in micro-transmitter modelsan AF1 (designed to fit the recessed style jack in Fender Stratocaster-type guitars) or an AG1
(which fits all other standard end-mount guitar jacks). In this manual, youll find a more detailed description of the features of your AirLine system, as well as a guided tour through all components, step-by-step instructions for setting up and using your system and full specifications. If your AirLine system was purchased in the United States, youll also find a warranty card encloseddont forget to fill it out and mail it! This will enable you to receive online technical support and will allow us to send you updated information about this and other Samson products in the future. If your AirLine system was purchased outside of the U. S., contact your local distributor for warranty details. Also, be sure to check out our website (http://www.samsontech.com) for complete information about our full product line. SPECIAL NOTE for U.S. purchasers: Should your AirLine system ever require servicing, a Return Authorization number (RA) is necessary. Without this number, the unit will not be accepted. If your AirLine system was purchased in the United States, please call Samson at 1-800-372-6766 for a Return Authorization number prior to shipping your system. If possible, return the unit in its original carton and packing materials. If your AirLine system was purchased outside of the U. S., contact your local distributor for information. 1 Samson AirLine QuickStart I H S L G N E If youve had some prior experience using wireless systems, these QuickStart instructions will get you up and running with your AirLine UHF guitar system in a matter of minutes! Detailed instructions for setting up and using your AirLine system can be found on page 9 of this manual, and the Guided Tour sections on pages 4 - 8 provide full descriptions of all AirLine component controls and displays. 1. Make sure that the supplied AP1 receiver and AF1 or AG1 transmitter are factory preset to the same channel. 2. Physically place the AP1 receiver where it will be used and extend its antennas vertically and spread outwards. 3. Set the power switch on your AF1 or AG1 transmitter to the off position (away from the arrow) and place a fresh AAA battery in it. Then turn the transmitter back on momentarily; its LED will flash once and then go off if the battery is sufficiently strong. Once battery strength is verified, turn the transmitter off again, then plug it into your electric guitar or bass. 4. Open the battery compartment of the AP1 by pressing on the latch and install a fresh battery; if you prefer, you can use an optional power supply instead. Turn the AP1 on momentarily to confirm that the battery has been installed correctly (or that the adapter has been connected correctly); the On/Battery Low LED should light green and not red. Then turn the AP1 power off. 5. Turn your amplifier or mixer off and make the physical cable connection between an audio input and the AP1 output jack. 6. Turn the Level knob on the AP1 completely counterclockwise, then turn its power on; the Power LED will light steadily green. 7. Turn on your AF1 or AG1 transmitter. The TX/Peak LED on the AP1 receiver should light steadily green, indicating that it is receiving valid RF signal and is placed and positioned correctly. 2 QuickStart Samson AirLine 8. Turn on the connected amplifier or mixer but keep its volume all the way down. Set the output level of your instrument to max-
imum and begin playing at a normal performance level while observing the AP1 TX/Peak LED. If the LED lights red (indicating a Peak condition) even with the AP1 Level control fully counterclockwise, engage the 15 dB pad on the transmitter. If not, slowly turn the Level control clockwise to the point where the TX/Peak LED occasionally blinks red during the very loudest passages, then back it off just slightly. Finally, raise the level of your connected amplifier and/or mixer until the desired volume is reached. 9. Do a walkaround through the intended area of coverage while observing the receivers TX/Peak LED; it should continue to be lit steadily green, indicating sufficient RF reception in all areas of coverage. If not, reposition the AP1 or its antennas as necessary. 10. If you hear any spurious noise from the receiver output when the transmitter is turned off, use the supplied plastic screwdriver to adjust the AP1 Squelch control, slowly turning it clockwise to the point at which the noise disappears. E N G L I S H 3 Samson AirLine Guided Tour - AP1 Receiver I H S L G N E 1 4 6 2 3 POWER ON BATT. LOW TX PEAK LEVEL ACTIV E
H I L E V E L P IC KUPS AP1 UHF RECEIVER OPEN 1: Power switch - Move this switch in the direction of the arrow to turn power to the AP1 on; move it away from the arrow to turn power off. 2: Power On / Battery Low LED - This LED lights green whenever the AP1 is powered on and it lights red whenever the battery in the AP1 is running low. In order to avoid compromising audio fidelity (or having the AP1 stop working completely), you should always replace the battery with a fresh one immediately whenever this LED lights red. 5 3: TX / Peak LED - This LED lights green whenever the AP1 is receiving RF signal from a transmitter and it lights red when output signal from the AP1 is at the onset of clipping (that is, when it is on the verge of being distorted). If you see this light during operation, lower the volume level of your instrument or switch on the transmitters 15 dB pad. For more information, see the section entitled Setting Up and Using Your AirLine System on page 9 in this manual. 4: Level control - This knob sets the level of the audio signal being output through the AP1 output jack (see #9 on page 6). When using an electric guitar or bass with an active or high-level pickup, set the knob in the marked area. For more information, see the section entitled Setting Up and Using Your AirLine System on page 9 in this manual. 4 Guided Tour - AP1 Receiver Samson AirLine 5: Antennas - Swivel mounting allows full rotation for optimum positioning of the dual AP1 antennas. In normal operation, both antennas should be placed in a vertical position and spread slightly outward. For convenience, they can be folded inward when transporting the AP1. See the Setting Up and Using Your AirLine System section on page 9 in this manual for more information about antenna positioning. 6: Battery compartment latch - Press gently on this latch to open the AP1 battery compartment (see #7 below). 7: Battery compartment - Insert a standard 9-volt alkaline battery here, being sure to observe the plus and minus polarity markings shown. We recommend the Duracell MN 1604 type battery. Although rechargeable Ni-Cad batteries can be used, they do not supply adequate current for more than four hours. WARNING: Do not insert the battery backwards; doing so can cause severe damage to the AP1 and will void your warranty. Note that the AP1 can also be AC powered with the use of an optional 12 volt adapter available from your Samson dealer (see #10 on the following page). 8: Plastic screwdriver - Specially designed for use in adjusting the AP1 Squelch control (see #11 on the following page). See the Setting Up and Using Your AirLine System section on page 9 in this manual for more information. 5 POWER ON BATT. LOW TX PEAK E N G L I S H LEVEL ACTIV E
H I L E V E L P IC KUPS AP1 UHF RECEIVER 7 8 SAMSON Samson AirLine Guided Tour - AP1 Receiver I H S L G N E OUTPUT 9 10 MIN MAX SQUELCH DC INPUT 12 VDC 11 9: Output jack - Use this standard unbalanced high impedance (5 - 10 K Ohm) 1/4" jack to connect the AP1 to your amplifier or audio mixer. Wiring is as follows: tip hot, sleeve ground. 10: DC input - Connect an optional 12 volt 200 mA power adapter (available from your Samson dealer) here. WARNING: Do not substitute any other kind of power adapter; doing so can cause severe damage to the AP1 and will void your warranty. Note that the AP1 can also be battery powered (see #7 on the previous page and the Setting Up and Using Your AirLine System section on page 9 in this manual). 11: Squelch control - This control determines the maximum range of the AP1 before audio signal dropout. Although it can be adjusted using the supplied plastic screwdriver, it should normally be left at its factory setting. See the Setting Up and Using Your AirLine System section on page 9 in this manual for more information. 6 Guided Tour - AF1 / AG1 Transmitters Samson AirLine 2 3 4 5 1 AF1 15dB PAD POWER E N G L I S H Note: The AF1 and AG1 transmitters are functionally identical apart from the angling of the 1/4 plug. For purposes of illustration, only the AF1 is shown on these pages. 1: Plug - Insert this standard 1/4 plug into your electric guitar or electric bass. Note that the angling of the plug is different in the AF1 (which is designed to be used with instruments that have Fender Stratocaster-type recessed jacks) than in the AG1 (which is designed to be used with all other instruments that have end mount-jacks). 2: Power / Battery LED - This LED flashes once when the AF1 or AG1 is first turned on and lights steadily red when there are less than 2 hours of battery power remaining, indicating that the battery needs to be changed. In order to avoid compromising audio fidelity (or having the AF1 / AG1 stop working completely), you should always replace the battery with a fresh one immediately whenever this LED lights red. 7 Samson AirLine Guided Tour - AF1 / AG1 Transmitters I H S L G N E N O S M A S AF1 15dB PAD 7 PO WER 3: 15 dB Pad - Move this switch in the direction of the arrow to reduce the output of the AF1 or AG1 by 15 dB when your instrument is putting out too hot a signal. See the Setting Up and Using the AirLine System section on page 9 in this manual. 6 4: Power switch - Move this switch in the direction of the arrow to turn power to the AF1 or AG1 on; move it away from the arrow to turn power off. 5: Antenna - This permanently attached flexible antenna should be fully extended during normal operations. See the Setting Up and Using the AirLine System section on page 9 in this manual for more information about antenna positioning. 6: Battery cover - Pull back gently on this cover at the ribbing and pry upwards to remove. See the Setting Up and Using the AirLine System section on page 9 in this manual. 7: Battery compartment - Insert a standard AAA alkaline battery here, being sure to observe the plus and minus polarity markings shown. We recommend the Duracell type battery. Although rechargeable Ni-Cad batteries can be used, they do not supply adequate current for more than four hours. WARNING: Do not insert the battery backwards; doing so can cause severe damage to the AF1 / AG1 and will void your warranty. 8 Setting Up and Using Your AirLine System Samson AirLine E N G L I S H The basic procedure for setting up and using your AirLine System takes only a few minutes:
1. For your AirLine system to work correctly, both the receiver and transmitter must be set to the same channel. Remove all packing materials (save them in case of need for future service) and check to make sure that the supplied AP1 receiver and AF1 or AG1 transmitter are set to the same channel (a complete channel plan is printed on page 47 in this manual). If these channels do not match, contact your distributor or, if purchased in the United States, Samson Technical Support at 1-800-372-6766. 2. Physically place the AP1 receiver where it will be used. The general rule of thumb is to maintain line of sight between the receiver and transmitter so that the person using the transmitter can see the receiver. If you are using the AP1 to feed signal to an onstage amplifier, a good suggestion is to place it on top of the amplifier. 3. Extend the AP1 antennas and place them in a vertical position, spread slightly outwards for maximum coverage. 4. Make sure the Power On-Off switch in your AF1 or AG1 transmitter is set to Off and that the 15 dB pad is also Off (switch away from the direction of the arrow). Pull back gently on the AF1 or AG1 battery cover at the ribbing and pry it upwards to remove it. Please use care when opening this cover as undue force can damage it. Install a fresh AAA alkaline battery in the battery compartment, being sure to observe the polarity markings. Then carefully replace the battery cover and gently press down on it until it clicks. Momentarily turn on the power to the transmitter by sliding its Power on-off switch in the direction of the arrow; the Power/Battery LED will flash if the battery is sufficiently strong (if it lights steadily, the battery has less than 2 hours of power remaining and should be replaced). Once battery strength is verified, turn the transmitter off again and plug it into your electric guitar or bass. 5. With the Power switch on the AP1 set to the Off position (away from the arrow), gently press down on the AP1 battery compartment latch and swing the battery compartment door open (do not use force when opening or closing the battery door; it is hinged and not meant to be removed). Install a fresh 9-volt battery, then carefully close the battery door. Alternatively, you can 9 Samson AirLine Setting Up and Using Your AirLine System I H S L G N E connect a 12-volt AC adapter (available as an option from your Samson dealer). Turn the AP1 on momentarily to confirm that the battery has been installed correctly (or that the adapter has been connected correctly); the On/Battery Low LED should light green and not red. Then turn the AP1 power off. 6. Make the physical cable connection between the AP1 output jack and an audio input of your amplifier or mixer. Leave your ampli-
fier or mixer off at this time. 7. Turn the Level knob on the AP1 completely counterclockwise, then slide its Power switch in the direction of the arrow to turn it on. The Power On LED will light steadily green. 8. Turn on the power to the transmitter. The TX / Peak LED on the AP1 receiver should now light steadily green, indicating that it is receiving valid RF signal and is placed and positioned correctly. 9. Now its time to set the audio levels. Turn on your amplifier and/or mixer but keep its volume all the way down. Set the output level of your electric guitar or bass to maximum and begin playing it at a normal performance level while observing the AP1 TX/Peak LED. If the LED lights red (indicating a Peak condition) even with the AP1 Level control fully counterclockwise, engage the 15 dB pad on your transmitter by sliding the switch in the direction of the arrow. If not, slowly turn the AP1 Level control clockwise to the point where the TX/Peak LED occasionally blinks red during the very loudest passages, then back it off just slightly; this will ensure maxi-
mum signal to noise ratio. Finally, raise the level of your amplifier and/or mixer until the desired volume is reached. 10. If you hear distortion or the AP1 TX/Peak LED lights red even with the 15 dB pad engaged and the Level control at minimum
(fully counterclockwise), reduce the output level of your instrument until the LED no longer lights. Conversely, if you hear a weak, noisy signal at the desired volume level, make sure that your instrument is set to maximum output level, that the 15 dB pad is not engaged, and that the AP1 Level control is turned up. When using instruments with active or high level pickups, the Level control should normally be set in the marked region. 10 Setting Up and Using Your AirLine System Samson AirLine 11. Temporarily turn down the level of your amplifier or mixer and turn off the power to your transmitter, leaving the AP1 receiver on. Then restore the previously set level of your amplifier or mixer. With the transmitter off, the receiver output should be totally silent; if it is, skip ahead to the next step. If it isnt (that is, if you hear some noise), you may need to adjust the AP1 Squelch control. When the Squelch control is at its minimum setting, the AirLine system always provides maximum range without dropout; however, depending upon the particular environment your system is used in, you may need to reduce that range somewhat in order to eliminate band noise when the AF1 or AG1 transmitter is turned off. To do so, use the provided screwdriver to rotate the Squelch control completely counterclockwise (to the Min position), then slowly turn it clockwise until the noise disappears. If no noise is present at any posi-
tion, leave it at its fully counterclockwise Min position (so as to have the greatest overall range available). 12. When first setting up your AirLine System in a new environment, its always a good idea to do a walkaround in order to make sure that coverage is provided for your entire performance area. Accordingly, turn down the level of your audio system and turn on both the transmitter and receiver. Then restore the level of your audio system and while playing your electric guitar or bass at a normal performance level, walk through the entire area that will need to be covered. As you do so, observe the TX/Peak LED on the AP1 receiver to make sure that it is steadily lit green, indicating that it is receiving sufficiently strong RF signal. Always try to minimize the distance between transmitter and receiver as much as possible so that the strongest possible signal is received from all planned trans-
mission points. In certain environments, it may be desirable to angle the AP1s antennas differently from the vertical position. E N G L I S H If you have followed all the steps above and are experiencing difficulties, contact your local distributor or, if purchased in the United States, call Samson Technical Support (1-800-372-6766) between 9 AM and 5 PM EST. 11 Samson AirLine Introduction I S A N A R F Bienvenue sur Samson AirLine. Envolez-vous vers la libert grce aux systmes sans fil du nouveau millnaire ! Les microphones et les systmes d'instruments sans fil ont t dvelopps l'origine pour supprimer les cbles et offrir une complte libert de mouve-
ment. AirLine franchit une nouvelle tape dans cette volution en introduisant des metteurs plus petits, lgers et arodynamiques, par-
faitement discrets, qui offrent enfin une relle libert aux interprtes et aux musiciens. La cration d'metteurs si compacts a ncessit le dveloppement d'une nouvelle technologie propritaire : circuits miniaturiss et alimentation par une seule pile AAA
(autonomie moyenne de 14 heures) ; ces metteurs amliorent en outre la qualit de rception sans fil et offrent une qualit sonore optimale. Qui plus est, le rcepteur micro AP1 conu spcifiquement pour le systme AirLine est en fait plus petit que l'metteur sans fil classique !
Le systme UHF AirLine Samson pour guitares prsent dans ce manuel est conu pour se substituer au cble reliant la guitare ou la basse aux amplificateurs de scne ou la console de sonorisation. Vous pouvez ainsi parcourir toute la scne et descendre dans le public au beau milieu d'un concert ! Le systme utilise la bande de frquences UHF 801 - 805 MHz particulirement peu encom-
bre et intgre un rcepteur AP1 de type pdale ainsi que deux modles d'metteurs micro enfichables sur l'instrument : l'metteur AF1 (conu spcialement pour les guitares avec dfonce de type des Stratocasters Fender) et l'metteur AG1 (conu pour tre branch fleur sur la tranche ou sur le corps de la guitare). Ce manuel vous offre une description complte des spcificits de votre systme AirLine par un tour d'horizon des diffrents composants et des instructions pas pas pour la configuration et l'utilisation de votre systme ainsi qu'une prsentation complte des caractristiques techniques. Pour les utilisateurs ayant achet le systme AirLine aux Etats-Unis, n'oubliez pas de retourner la carte de garantie fournie avec l'appareil. Cette dmarche vous permettra de bnficier d'une aide en ligne et d'tre tenu inform des volutions du systme et des autres nouveauts Samson. Pour les utilisateurs n'ayant pas achet le systme AirLine aux Etats-Unis, contactez le distributeur de votre pays pour obtenir de plus amples informations sur la garantie accorde. Consultez galement notre site Internet
(http://www.samsontech.com) pour obtenir de plus amples informations sur la gamme complte de nos produits. NOTE l'attention exclusive des acheteurs aux Etats-Unis : Pour toute rparation de votre systme AirLine, un numro d'autorisation de retour pour rparation (Return Authorization) vous sera demand. Sans ce numro, votre appareil ne pourra tre pris en charge. Si vous avez effectivement achet le systme AirLine aux Etats-Unis, contactez Samson au 1-800-372-6766 pour obtenir ce numro de retour pour rparation avant d'envoyer l'appareil. Rexpdiez si possible l'appareil dans son emballage et avec ses protections d'orig-
ine. Si vous vous tes procur le systme AirLine en dehors des Etats-Unis, contactez votre distributeur pour obtenir de plus amples 12 Prise en main Samson AirLine informations ce sujet. Si vous possdez dj une certaine exprience des systmes sans fil, ces instructions de prise en main vous permettront de rendre oprationnel en quelques minutes seulement le systme AirLine sans fil UHF pour guitares. Des informations plus compltes sur le systme AirLine vous sont donnes en page 20 de ce manuel ; d'autre part, les sections de tour d'horizon en pages 15 - 19 vous prsentent une description complte des commandes, connecteurs et tmoins des modles AirLine. 1. Vrifiez que le rcepteur AP1 et l'metteur AF1 ou AG1 fournis sont bien rgls sur le mme canal. 2. Placez le rcepteur AP1 l'endroit o il devra tre utilis et redressez ses antennes. 3. Mettez l'metteur AF1 ou AG1 hors tension en rglant l'interrupteur d'alimentation sur Off (pas sur la flche) et installez une pile AAA neuve. Replacez ensuite l'metteur sous tension ; son tmoin lumineux clignote une fois, puis s'teint si la pile est suffisamment puissante. Lorsque la puissance de la pile a t vrifie, mettez l'metteur hors tension et connectez votre guitare ou votre basse. 4. Ouvrez le compartiment pile du rcepteur AP1 et installez une pile neuve ; utilisez si vous le prfrez l'alimentation optionnelle. Placez temporairement l'AP1 sous tension pour vrifier si la pile a t correctement installe (ou si l'adaptateur est correctement connect) ; le tmoin On/Battery Low doit s'allumer en vert et non en rouge. Placez enfin l'AP1 hors tension. 5. Placez votre amplificateur ou la console hors tension puis reliez la sortie du rcepteur AP1 une entre audio. 6. Tournez le potentiomtre de rglage de niveau de l'AP1 compltement gauche, puis placez-le sous tension ; le tmoin Power doit logiquement rester allum en vert. 7. Placez l'metteur AF1 ou AG1 sous tension. Le tmoin TX/Peak du rcepteur AP1 s'allume en vert s'il reoit effectivement le signal HF et s'il est correctement positionn. F R A N A S I 13 Samson AirLine Prise en main 8. Placez l'amplificateur et la console sous tension en veillant garder un rglage de volume au minimum. Rglez le niveau de sortie de l'instrument au maximum et commencez jouer au niveau souhait tout en observant le tmoin TX/Peak de l'AP1. Si ce tmoin s'allume en rouge (indiquant une distorsion) alors que le rglage de niveau du rcepteur AP1 est rgl au minimum, activez l'attnuateur 15 dB de l'metteur. Si ce tmoin n'est pas allum, tournez progressivement le potentiomtre de rglage de niveau jusqu'au point o le tmoin TX/Peak ne clignote que sur les passages les plus forts, puis rduisez trs lgrement le niveau. Augmentez enfin le niveau de l'amplificateur et/ou de la console jusqu' atteindre le niveau recherch. I S A N A R F 9. Parcourez l'ensemble de la zone couvrir et observez le tmoin TX/Peak du rcepteur ; ce tmoin reste constamment allum en vert si la rception est assure sur toutes les parties de la scne. Si le tmoin s'teint, dplacez le rcepteur ou positionnez ses antennes diffremment. 10. Si un bruit de fond est audible en sortie du rcepteur alors que l'metteur est hors tension, utilisez le tournevis en plastique fourni pour modifier le rglage de Squelch de l'AP1 : tournez pour cela la vis lentement vers la droite jusqu' ce que le bruit disparaisse. 14 Visite guide Rcepteur AP1 Samson AirLine 1: Interrupteur Power - Poussez cet interrupteur en direction de la flche pour placer le rcepteur AP1 sous tension ; poussez l'interrupteur l'oppos de la flche pour placer l'appareil hors tension. 2: Tmoin Power On / Battery Low - Ce tmoin s'allume en vert lorsque l'AP1 est sous tension et en rouge pour signaler que la charge de la pile devient insuff-
isante. Afin de prserver l'intgrit et la fidlit du signal (et pour viter que l'AP1 cesse de fonctionner), il est vivement conseill de remplacer la pile usage par une neuve ds que le tmoin passe au rouge. 3: Tmoin TX / Peak - Ce tmoin s'allume en vert ds que l'AP1 reoit un signal HF d'un metteur et s'allume en rouge lorsque le signal de sortie de l'AP1 commence tre crt ( la limite de la distorsion). Si ce tmoin s'allume en rouge en cours d'utilisation, rduisez le volume de l'instrument ou activez l'attnuateur 15 dB de l'metteur. Pour obtenir de plus amples informations, reportez-vous la section intitule Configuration et utilisation du systme AirLine en page 20 de ce manuel. 4: Potentiomtre de volume - Ce potentiomtre permet de rgler le niveau du sig-
nal audio dirig vers la sortie de l'AP1 (#9 en page 6). Si vous utilisez une gui-
tare ou une basse avec micro actif ou niveau lev, rglez le potentiomtre face la marque. Pour obtenir de plus amples informations, reportez-vous la section intitule Configuration et utilisation du systme AirLine en page 20 de ce manuel. 1 4 6 15 2 3 POWER ON BATT. LOW TX PEAK LEVEL ACTIV E
H I L E V E L P IC KUPS AP1 UHF RECEIVER OPEN F R A N A S I 5 I S A N A R F Samson AirLine Visite guide Rcepteur AP1 POWER ON BATT. LOW TX PEAK 5: Antennes - Le montage sur pivots des antennes de l'AP1 autorise une rotation optimale. Dans des circonstances normales, les deux antennes doivent tre places en position verti-
cale et tre lgrement orientes vers l'extrieur. Repliez-les vers l'intrieur pour faciliter le rangement et le transport. Reportez-vous la section Configuration et utilisation du systme AirLine en page 20 de ce manuel pour obtenir de plus amples informations concernant le positionnement des antennes. ACTIV E LEVEL
H I L E V E L P IC KUPS 6: Cache du compartiment de la pile - Poussez lgrement sur le cache pour accder au compartiment de la pile de l'AP1 (voir illustration ci-dessous, #7). AP1 UHF RECEIVER 7 8 SAMSON 7: Compartiment de la pile - Ce compartiment accepte les piles alcalines 9 volts ; respectez les signes de polarit indiqus sur l'appareil. Nous recommandons plus particulirement l'usage de la pile Duracell type MN 1604. Les piles rechargeables Ni-Cad sont certes com-
patibles, mais offrent une autonomie n'excdant pas quatre heures. ATTENTION : Veillez ne pas installer la pile l'envers sous peine d'endommager grave-
ment l'AP1 et d'annuler la garantie. Notez par ailleurs que l'AP1 peut tre reli une alimen-
tation en courant alternatif au moyen d'un adaptateur 12 V en option, disponible chez votre revendeur (voir #10 en page suivante). 8: Tournevis en plastique - Tournevis conu tout spcialement pour le rglage du Squelch de l'AP1 (voir #11 en page suivante). Reportez-vous la section Configuration et utilisation du systme AirLine en page 20 de ce manuel pour obtenir de plus amples informations. 16 Visite guide Rcepteur AP1 Samson AirLine 9: Connecteur de sortie - Reliez l'AP1 l'amplificateur ou votre console de mixage l'aide d'un jack 6,35 mm asymtrique haute impdance (5 - 10 kOhm). Cblage : Pointe=Point chaud, Bague=Masse. 10: Alimentation en courant continu - Reliez l'adaptateur 12 Volts 200 mA en option (disponible chez votre revendeur Samson) ce con-
necteur. ATTENTION : N'utilisez que le type d'adaptateur recom-
mand, au risque sinon d'endommager l'AP1 et d'annuler la garantie. L'alimentation de l'AP1 peut galement tre assure par une pile (voir
#7 en page prcdente et dans la section Configuration et utilisation du Systme AirLine en page 20 de ce manuel). 11: Rglage du Squelch - Ce rglage dtermine la porte maximale de l'AP1 avant dgradation ou perte du signal audio. Bien qu'il soit possible de modifier ce rglage au moyen du tournevis en plastique fourni, veuillez le laisser en temps normal sur sa valeur d'usine. Reportez-vous la section Configuration et utilisation du systme AirLine en page 20 pour obtenir de plus amples informations. 10 OUTPUT 9 F R A N A S I MIN MAX SQUELCH DC INPUT 12 VDC 11 17 Samson AirLine Visite guide Emetteur AF1 / AG1 2 3 4 5 1 AF1 15dB PAD POWER I S A N A R F Note : Les caractristiques des metteurs AF1 et AG1 sont rigoureusement identiques, exception faite de l'angle du jack 6,35 mm. Seul l'AF1 est reprsent dans les illustrations proposes par ce manuel. 1: Connecteur - Ce jack 6,35 mm s'insre dans votre guitare lectrique ou dans votre basse. L'angle form par le jack est diffrent sur l'metteur AF1 (conu spcialement pour les guitares avec dfonce de type des Stratocasters Fender) et sur l'metteur AG1
(conu pour tre branch fleur sur la tranche ou sur le corps de la guitare). 2: Tmoin Power / Battery - Ce tmoin clignote une fois lors de la premire mise sous tension de l'AF1 ou de l'AG1 et reste allum en rouge lorsqu'il reste moins de 2 heures d'autonomie (ncessit de changer la pile). Afin de prserver l'intgrit et la fidlit du signal (et pour viter que l'AF1/AG1 cesse de fonctionner), il est vivement conseill de remplacer la pile usage par une neuve ds que le tmoin passe au rouge. 18 Visite guide Emetteur AF1 / AG1 Samson AirLine N O S M A S AF1 15dB PAD PO WER 6 7 F R A N A S I 3: Attnuateur 15 dB - Poussez le bouton de l'attnuateur vers la flche pour attnuer le signal de sortie de l'AF1 ou de l'AG1 de 15 dB si celui-ci est trop lev. Reportez-vous la section Configuration et utilisation du systme AirLine en page 20 pour obtenir de plus amples informations. 4: Interrupteur Power - Poussez cet interrupteur vers la flche pour placer l'AF1 ou l'AG1 sous tension ; poussez l'interrupteur en sens inverse pour placer l'appareil hors tension. 5: Antenne - Cette antenne flexible fixe doit rester compltement sortie pendant l'utilisation. Reportez-vous la section Configuration et utilisation du systme AirLine en page 20 de ce manuel pour obtenir de plus amples informations. 6: Cache du compartiment de la pile - Poussez doucement sur la partie avec rainures et tirez vers le haut pour retirer le cache. Reportez-vous la section Configuration et utilisation du systme AirLine en page 20 pour obtenir de plus amples informations. 7: Compartiment de la pile - Ce compartiment accepte les piles alcalines AAA ; veillez bien respecter les signes de polarit indiqus sur l'appareil. Nous recommandons plus particulirement l'usage des piles Duracell. Les piles rechargeables Ni-Cad sont certes compatibles, mais offrent une autonomie n'excdant pas quatre heures. ATTENTION : Veillez ne pas installer la pile l'envers sous peine 19 Samson AirLine Configuration et utilisation du systme AirLine I S A N A R F Les rglages de configuration et d'utilisation de votre systme AirLine ne prennent que quelques minutes :
1. Pour que votre systme AirLine fonctionne correctement, veillez ce que l'metteur et le rcepteur soient tous deux rgls sur le mme canal. Retirez les deux appareils de leur emballage (conservez ce dernier pour d'ventuelles rparations) et vrifiez que le rcepteur AP1 et que les metteurs AF1 ou AG1 sont bien rgls sur le mme canal (vous trouverez un tableau complet des canaux en page 47 de ce manuel). Si les rglages de canal ne correspondent pas, contactez votre distributeur. 2. Placez le rcepteur AP1 l'endroit o il devra tre install : il est important de conserver un "couloir" dgag entre l'metteur et le rcepteur afin que la personne utilisant ou portant l'metteur puisse voir le rcepteur. Si vous utilisez l'AP1 pour transmettre le signal un ampli de scne, nous vous suggrons de l'installer de prfrence sur l'amplificateur. 3. Redressez les antennes de l'AP1 et orientez-les lgrement vers l'extrieur. 4. Assurez-vous que l'interrupteur Power On-Off de l'metteur AF1 ou AG1 est rgl sur Off et que l'attnuateur 15 dB est galement dsactiv (bouton pouss en sens inverse de la flche). Poussez doucement sur la partie rainures et tirez vers le haut pour retirer le cache de l'AF1 ou de l'AG1. Ne forcez pas l'ouverture de ce cache au risque de l'endommager. Installez la pile alcaline AAA neuve en veillant respecter les signes de polarit. Replacez dlicatement le cache du compartiment de la pile et appuyez lgrement jusqu'au "clic". Placez l'metteur sous tension quelques instants en faisant glisser l'interrupteur vers la flche ; le tmoin Power/Battery clignote si la pile est suffisamment charge (il reste allum si la charge de la pile n'autorise qu'une autonomie infrieure 2 heures et qu'elle doit tre remplace). Une fois la charge de la pile vrifie, placez l'metteur hors tension et connectez-le la guitare ou la basse. 5. Si l'interrupteur Power de l'AP1 est rgl sur Off ( l'oppos de la flche), poussez dlicatement sur le systme de blocage et soulevez le cache du compartiment (ne forcez pas l'ouverture ou la fermeture du cache ; celui-ci est mont sur une charnire et n'est pas cens tre retir). Installez une pile 9 Volts neuve et refermez le cache sans forcer. L'AP1 peut galement tre aliment via un 20 Configuration et utilisation du systme AirLine Samson AirLine adaptateur 12 Volts courant alternatif (disponible chez votre distributeur Samson). Placez quelques instants l'AP1 sous tension pour vous assurer que la pile est correctement installe (ou que l'adaptateur est correctement connect) ; le tmoin On/Battery Low doit rester allum en vert si l'alimentation est correcte. Pour finir, replacez l'AP1 hors tension. 6. Procdez la connexion physique entre le connecteur de sortie de l'AP1 et l'entre audio de votre amplificateur ou de votre console (hors tension la connexion). 7. Tournez le potentiomtre Level de l'AP1 compltement vers la gauche puis faites glisser l'interrupteur Power en direction de la flche pour placer l'appareil sous tension. Le tmoin Power On doit logiquement rester allum en vert. 8. Placez l'metteur sous tension. Le tmoin TX / Peak du rcepteur AP1 doit rester allum en vert pour signaler qu'il reoit un signal HF valide et qu'il est correctement connect. 9. Passons au rglage des niveaux audio. Placez la console de mixage et/ou l'amplificateur sous tension sans pour autant relever le volume. Rglez le niveau de sortie de votre guitare ou de votre basse au maximum et commencez jouer au niveau souhait tout en observant le tmoin TX/Peak de l' AP1. Si ce tmoin s'allume en rouge (indiquant une distorsion) alors que le rglage de niveau du rcepteur AP1 est rgl au minimum, faites glisser le bouton de l'attnuateur 15 dB vers la flche. Si ce tmoin n'est pas allum, tournez progressivement le potentiomtre de rglage de niveau jusqu'au point o le tmoin TX/Peak ne clignote en rouge que sur les passages les plus forts puis rduisez trs lgrement le niveau. Augmentez enfin le niveau de l'amplificateur et/ou de la console jusqu' atteindre le niveau recherch. 10. Si vous entendez une distorsion au volume souhait, ou si le tmoin TX/Peak du rcepteur AP1 reste allum en rouge alors que l'attnuateur 15 dB est activ et que le volume est rgl au minimum (compltement gauche), rduisez le niveau de sortie de l'instrument jusqu' ce que le tmoin s'teigne. l'inverse, si vous obtenez un son faible avec un bruit de fond au niveau souhait, vrifiez que le niveau de sortie de l'instrument est bien rgl au maximum, que l'attnuateur 15 dB n'est pas activ et que le rglage F R A N A S I 21 Samson AirLine Configuration et utilisation du systme AirLine de volume de l'AP1 est suffisamment lev. La commande Level doit logiquement tre positionne face la marque lorsque vous travaillez avec des instruments quips de micros actifs ou niveau lev. 11. Baissez temporairement le niveau de l'amplificateur ou de la console, placez l'metteur hors tension mais laissez le rcepteur AP1 sous tension. Revenez ensuite sur le niveau pralablement dfini sur l'amplificateur ou sur la console. Une fois l'metteur hors tension, la sortie du rcepteur doit tre parfaitement silencieuse (aucun signal transmis) ; si aucun signal n'est audible, passez l'tape suivante. Si un signal est effectivement audible, un rglage du Squelch de l'AP1 s'impose. Lorsque le Squelch est rgl au minimum, le systme AirLine offre une porte maximale, sans perte de signal ; cependant, il peut tre prfrable dans certaines situations de rduire lgrement cette porte afin d'liminer le bruit de fond prsent lorsque l'metteur AF1 ou AG1 est teint. Aidez-vous pour ce rglage du tournevis fourni : rglez dans un premier temps le Squelch au minimum (compltement gauche), puis tournez douce-
ment vers la droite jusqu' ce que le bruit disparaisse. Si aucun bruit de fond n'est perceptible quel que soit le rglage, laissez-le en position Min, compltement tourn vers la gauche. Vous bnficiez alors de la porte maximale. 12. Lorsque vous installez le systme AirLine dans un nouvel environnement, assurez-vous que la scne est couverte dans sa totalit. Pour ce faire, baissez le volume de votre systme audio, puis placez l'metteur et le rcepteur sous tension. Ramenez ensuite le volume du systme audio au niveau souhait et dplacez-vous sur toute la zone couvrir. Observez alors le tmoin TX/Peak du rcepteur AP1 ; ce tmoin reste constamment allum en vert s'il reoit un signal HF suffisamment puissant. Dans la mesure du possible, rduisez au minimum la distance sparant l'metteur du rcepteur afin que ce dernier reoive un singal puissant depuis tous les points de transmission. Dans certains environnements, il peut s'avrer ncessaire d'orienter les antennes de l'AP1 diffremment. I S A N A R F Si vous rencontrez le moindre problme, n'hsitez pas contacter votre distributeur. 22 Einleitung Samson AirLine Willkommen bei Samson AirLine dem Drahtlos-System fr das neue Jahrtausend! Drahtlose Mikrofon- und Instrumentensysteme wurden ursprnglich entwickelt, um Kabel berflssig zu machen und eine ungeahnte Bewegungsfreiheit zu bieten. AirLine geht noch einen Schritt weiter und verwendet Sender, die klein, leicht, aerodynamisch und fast unsichtbar sind und dem Anwender eine vllig stressfreie Erfahrung vermitteln. Um die kleinsten Drahtlos-Sender der Welt zu schaffen, entwickelten wir eine neue, eigene Technologie. Diese Sender zeichnen sich durch eine Miniaturschaltung aus, knnen mit nur einer winzigen Mikrozelle (normalerweise 14 Stunden lang) betrieben werden und liefern eine wesentlich verbesserte drahtlose Empfangs- und Klangqualitt. Zudem ist der speziell fr das AirLine Gitarrensystem entwickelte AP1 Empfnger kleiner als ein gewhnlicher Drahtlossender. Das in diesem Handbuch beschriebene Samson AirLine UHF Gitarrensystem kann das Kabel zwischen Ihrer E-Gitarre oder Ihrem E-Bass und Ihrem Bhnenverstrker oder PA-Mischer ersetzen und lsst Sie ungehindert auf der Bhne agieren oder sogar mitten im Auftritt dem Publikum einen Besuch abstatten! Das System arbeitet im relativ freien UHF-Frequenzbereich von 801 - 805 MHz und umfasst einen Empfnger in Bodeneffekt-Gre und einen von zwei einsteckbaren Mikrosendermodellen einen AF1 (der in die vertieft angebrachte Buchse von Gitarren des Typs Fender Stratocaster passt) oder einen AG1 (der in alle anderen Standard-
Gitarrenbuchsen passt). In diesem Handbuch finden Sie eine detailliertere Beschreibung der Funktionen Ihres AirLine Systems, eine Fhrung durch alle Komponenten sowie schrittweise Anleitungen zum Einrichten und Einsetzen Ihres Systems, ergnzt durch ausfhrliche technische Daten. Wenn Sie Ihr AirLine-System in den USA gekauft haben, wurde auch eine Garantiekarte beigelegt, die Sie unbedingt ausfllen und abschicken sollten! Dadurch knnen Sie online technische Untersttzung in Anspruch nehmen und zuknftig aktualisierte Informationen ber dieses und andere Samson Produkte erhalten. Wenn Sie Ihr AirLine System nicht in den USA gekauft haben, setzen Sie sich wegen der Garantie bitte mit Ihrem lokalen Vertrieb in Verbindung. Besuchen Sie bitte auch unsere Homepage
(http://www.samsontech.com), um ausfhrliche Informationen ber unsere ganze Produktpalette zu erhalten. BESONDERE ANMERKUNG fr Kufer in den USA: Falls Ihr AirLine System einmal gewartet werden muss, bentigen Sie eine sogenannte Return Authorization Nummer (RA/Rckgabeberechtigungsnummer). Ohne diese Nummer wird das Gert nicht angenommen. Wenn Sie Ihr AirLine System in den USA gekauft haben, rufen Sie bitte Samson unter der Nummer 1-800-372-6766 an, um vor der Rckgabe eine Return Authorization-Nummer zu erhalten. Schicken Sie das Gert mglichst in seiner Originalverpackung zurck. Wenn Sie Ihr AirLine System nicht in den USA gekauft haben, setzen Sie wegen weiterer Einzelheiten bitte mit Ihrem lokalen D E U T S C H E 23 Samson AirLine Schneller Einstieg Vertrieb in Verbindung. Wenn Sie bereits Erfahrungen mit Drahtlos-Systemen besitzen, werden Sie mit diesen Schnellstart-Anleitungen Ihr AirLine UHF Gitarrensystem schon in wenigen Minuten einsetzen knnen! Detaillierte Anleitungen zum Einrichten und Anwenden Ihres AirLine-
Systems finden Sie auf Seite 31 dieses Handbuchs. Die Rundgang-Abschnitte der Seiten 26 - 30 liefern eine detaillierte Beschreibung aller Regler und Anzeigen der AirLine-Komponenten. 1. Stellen Sie sicher, dass der mitgelieferte AP1 Empfnger und AF1 oder AG1 Sender werkseitig auf den gleichen Kanal voreingestellt sind. 2. Stellen Sie den AP1 Empfnger an seinem Einsatzort auf, ziehen Sie seine Antennen nach oben heraus und biegen Sie sie nach auen. E H C S T U E D 3. Stellen Sie den Netzschalter Ihres AF1 oder AG1 Senders auf Off (gegen die Richtung des Pfeils) und setzen Sie eine neue Mikrozelle-Batterie ein. Schalten Sie dann den Sender kurz ein. Wenn die Batterie stark genug ist, wird seine LED einmal blinken und dann erlschen. Nachdem Sie die Batteriestrke berprft haben, schalten Sie den Sender wieder aus und stecken Sie ihn in Ihre E-Gitarre oder Ihren E-Bass. 4. ffnen Sie das Batteriefach des AP1, indem Sie auf die Verriegelung drcken, und setzen Sie eine neue Batterie ein. Sie knnen bei Bedarf auch ein optionales Netzteil verwenden. Schalten Sie den AP1 kurz ein, um sicherzustellen, dass die Batterie richtig eingebaut wurde (oder dass der Adapter richtig angeschlossen wurde). Die On/Battery Low LED sollte grn (nicht rot) leuchten. Schalten Sie dann den AP1 aus. 5. Schalten Sie Ihren Verstrker oder Mischer aus und stellen Sie eine Kabelverbindung zwischen einem Audioeingang und der AP1 Ausgangsbuchse her. 24 Schneller Einstieg Samson AirLine 6. Drehen Sie den Level-Regler des AP1 ganz nach links und schalten Sie dann den AP1 ein. Die Power LED leuchtet jetzt konstant grn. 7. Schalten Sie Ihren AF1 oder AG1 Sender ein. Die TX/Peak LED des AP1 Empfngers sollte konstant grn leuchten und damit anzeigen, dass er gltige Radiofrequenz-Signale (RF) empfngt und richtig platziert ist. 8. Schalten Sie den angeschlossenen Verstrker oder Mischer ein, aber lassen Sie seinen Pegel ganz zurckgedreht. Stellen Sie den Ausgangspegel Ihres Instruments auf Maximum und spielen Sie mit normalem Performance-Pegel, whrend Sie die AP1 TX/Peak LED beobachten. Wenn die LED auch bei vllig zurckgedrehtem AP1 Level-Regler rot leuchtet (bersteuerungen), sollten Sie die 15 dB Dmpfung am Sender einschalten. Andernfalls knnen Sie den Pegelregler langsam nach rechts bis zu der Position drehen, an der die TX/Peak LED bei den lautesten Passagen gelegentlich rot blinkt. Drehen Sie dann den Regler etwas zurck. Heben Sie dann den Pegel Ihres angeschlossenen Verstrkers und/oder Mischers so weit an, bis die gewnschte Lautstrke erreicht ist. 9. Gehen Sie in dem voraussichtlichen Sendebereich umher und beobachten Sie die TX/Peak LED des Empfngers. Sie sollte stndig grn leuchten und dadurch einen guten RF-Empfang im gesamten Sendebereich anzeigen. Andernfalls mssen Sie den AP1 oder seine Antennen neu positionieren. 10. Wenn Sie bei ausgeschaltetem Sender Strgerusche ber den Empfngerausgang hren, stellen Sie mit dem mitgelieferten Plastikschraubenzieher den AP1 Squelch-Regler ein, indem Sie ihn langsam nach rechts bis zu dem Punkt drehen, an dem die Strgerusche verschwinden. D E U T S C H E 25 Samson AirLine bersicht - Empfnger AP1 2 3 POWER ON BATT. LOW TX PEAK ACTIV E LEVEL
H I L E V E L P IC KUPS 5 AP1 UHF RECEIVER OPEN 1 4 6 E H C S T U E D 1: Netzschalter Bewegen Sie diesen Schalter in Richtung des Pfeiles, um den AP1 einzuschalten. Bewegen Sie ihn vom Pfeil weg, um den AP1 auszuschalten. 2: Ein/Batterie leer LED Diese LED leuchtet grn, wenn Sie den AP1 einschalten, und rot, wenn die Batteriespannung des AP1 nachlsst. Um die Klangtreue nicht zu beeintrchtigen (oder den AP1 vllig ausfallen zu lassen), sollten Sie die Batterie immer sofort durch eine neue ersetzen, wenn diese LED rot leuchtet. 3: Empfang/bersteuerung LED Diese LED leuchtet grn, wenn der AP1 ein Radiofrequenzsignal von einem Sender empfngt, und rot, wenn das Ausgangssignal des AP1 sich kurz vor der Clippinggrenze befindet (d. h. an der Verzerrungsgrenze). Wenn Sie diese LED whrend des Gertebetriebs sehen, sollten Sie den Signalpegel an Ihrem Instrument zurckdrehen oder die 15 dB Dmpfung des Senders einschalten. Wegen nherer Einzelheiten siehe Abschnitt AirLine System einrichten und einsetzen auf Seite 31 in diesem Handbuch. 4: Pegelregler Mit diesem Regler stellen Sie den Pegel des Audiosignals ein, das ber die AP1 Ausgangsbuchse ausgegeben wird
(siehe Nr. 9 auf Seite 6). Wenn Sie eine E-Gitarre oder einen E-Bass mit einem aktiven oder hochpegeligen Tonabnehmer verwenden, stellen Sie den Regler im markierten Bereich ein. Wegen nherer Einzelheiten siehe Abschnitt AirLine System einrichten und einsetzen auf Seite 31 in diesem Handbuch. 26 bersicht - Empfnger AP1 Samson AirLine 5: Antennen Da die beiden AP1 Antennen auf einem Schwenkgelenk montiert sind, knnen sie in alle Richtungen gedreht und somit optimal positioniert werden. Bei normalem Betrieb sollten beide Antennen vertikal aufgerichtet und leicht nach auen gerichtet sein. Zum Transport des AP1 knnen die Antennen nach innen geklappt werden. Wegen nherer Einzelheiten ber das Ausrichten der Antennen siehe Abschnitt AirLine System einrichten und einsetzen auf Seite 31 in diesem Handbuch. POWER ON BATT. LOW TX PEAK ACTIV E
H I L E V E L P IC KUPS 6: Batteriefach-Riegel Ein leichter Druck auf diesen Riegel gengt, um das AP1 Batteriefach zu ffnen (siehe Nr. 7 unten). LEVEL 7: Batteriefach Setzen Sie hier eine normale 9-Volt (alkalische) Batterie ein und achten Sie hierbei auf die Plus/Minus-Markierungen. Wir empfehlen Batterien des Typs Duracell MN 1604. Man kann auch wiederaufladbare Nickel-Kadmium Batterien verwenden, wobei diese allerdings nur vier Stunden lang ausreichend Spannung liefern. ACHTUNG: Setzen Sie die Batterien nicht verkehrt herum ein. Dies kann den AP1 ernsthaft beschdigen und fhrt zum Verlust Ihres Garantieanspruchs. Sie knnen den AP1 auch ber einen optionalen 12 Volt Adapter (erhltlich bei Ihrem Samson-Hndler siehe Nr. 10 auf der folgenden Seite) an Wechselspannungsquellen anschlieen. 8: Plastikschraubenzieher Spezialkonstruktion zum Einstellen des AP1 Squelch-Reglers (siehe Nr. 11 auf der folgenden Seite). Wegen nherer Einzelheiten siehe Abschnitt AirLine System einrichten und einsetzen auf Seite 31 in diesem 27 AP1 UHF RECEIVER 7 8 SAMSON D E U T S C H E Samson AirLine bersicht - Empfnger AP1 OUTPUT 9 E H C S T U E D 10 MIN MAX SQUELCH DC INPUT 12 VDC 11 Handbuch. 9: Ausgangsbuchse ber diese asymmetrische hoch-ohmige
(5 - 10 K Ohm) 1/4" Buchse knnen Sie den AP1 an Ihren Verstrker oder Audiomischer anschlieen. Die Verdrahtung ist: Spitze/hei, Schirm/Masse. 10: Gleichstrom-Eingang Hier knnen Sie einen optionalen 12 Volt 200 mA Netzadapter anschlieen (erhltlich bei Ihrem Samson-Hndler). ACHTUNG : Verwenden Sie keine andere Art von Netzadapter. Dies kann den AP1 ernsthaft beschdigen und fhrt zum Verlust Ihres Garantieanspruchs. Der AP1 kann auch mit Batterien betrieben werden (siehe Nr. 7 auf der vorherigen Seite sowie den Abschnitt AirLine System einrichten und einsetzen auf Seite 31 in diesem Handbuch). 11: Squelch-Regler Dieser Regler bestimmt den maximalen Dynamikbereich des AP1 vor dem Ausfall des Audiosignals. Obwohl Sie diesen Bereich mit dem beiliegenden Plastikschraubenzieher nachregeln knnen, sollten Sie normalerweise die Werkseinstellung belassen. Wegen nherer Einzelheiten siehe Abschnitt AirLine System einrichten und einsetzen auf Seite 31 in diesem Handbuch. 28 bersicht - Sender AF1 / AG1 Samson AirLine 2 3 4 5 1 AF1 15dB PAD POWER Anmerkung: Mit Ausnahme der Abwinkelung des 1/4" Steckers sind die AF1 und AG1 Sender funktional identisch. In den Abbildungen dieser Seiten wird immer nur der AF1 gezeigt. 1: Stecker Stecken Sie diesen 1/4" Stecker in Ihre E-Gitarre bzw. Ihren E-Bass. Beachten Sie bitte, dass der Stecker beim AF1
(der in die vertieft angebrachte Buchse von Gitarren des Typs Fender Stratocaster passt) anders abgewinkelt ist als beim AG1
(der in alle anderen Standard-Gitarrenbuchsen passt). 2: Netz-/Batterie-LED Diese LED blinkt einmal beim Einschalten des AF1 oder AG1 und leuchtet konstant rot, wenn weniger als zwei Stunden an Batteriespannung verfgbar sind. Damit wird angezeigt, dass die Batterien gewechselt werden mssen. Um die Klangtreue nicht zu beeintrchtigen (oder den AP1/AG1 vllig ausfallen zu lassen), sollten Sie die Batterie immer durch eine neue ersetzen, sobald diese LED rot leuchtet. D E U T S C H E 29 Samson AirLine bersicht - Sender AF1 / AG1 N O S M A S AF1 15dB PAD 7 E H C S T U E D PO WER 3: 15 dB Dmpfung Bewegen Sie diesen Schalter in die Richtung des Pfeils, um den Ausgangspegel des AF1 oder AG1 um 15 dB zu bedmpfen, wenn Ihr Instrument ein zu starkes Signal ausgibt. Siehe Abschnitt AirLine System einrichten und ein-
setzen auf Seite 31 in diesem Handbuch.. 6 4: Netzschalter Bewegen Sie diesen Schalter in Richtung des Pfeiles, um den AP1 oder AG1 einzuschalten. Bewegen Sie ihn vom Pfeil weg, um den AP1/AG1 auszuschalten. 5: Antenna Diese fest angebrachte flexible Antenne sollte im normalen Betrieb voll ausgezogen sein. Wegen nherer Einzelheiten ber das Positionieren der Antenne siehe Abschnitt AirLine System einrichten und einsetzen auf Seite 31. 6: Batterieabdeckung Schieben Sie die Abdeckung an der Rippung zurck und heben Sie sie zum Entfernen nach oben. Siehe Abschnitt AirLine System einrichten und einsetzen auf Seite 31 in diesem Handbuch. 7: Batteriefach Setzen Sie hier eine normale alkalische Mikrozelle ein und achten Sie hierbei auf die Plus/Minus-
Markierungen. Wir empfehlen Batterien des Typs Duracell. Man kann auch wiederaufladbare Nickel-Kadmium Batterien verwenden, wobei diese allerdings nur vier Stunden lang ausre-
ichend Spannung liefern. ACHTUNG: Setzen Sie die Batterien nicht verkehrt herum ein. Dies kann den AP1/AG1 ernsthaft beschdigen und fhrt zum Verlust Ihres Garantieanspruchs. 30 AirLine System einrichten und einsetzen Samson AirLine Das grundlegende Verfahren zum Einrichten und Einsetzen Ihres AirLine Systems dauert nur wenige Minuten:
1. Damit Ihr AirLine System richtig funktioniert, mssen Empfnger und Sender auf den gleichen Kanal eingestellt sein. Entfernen Sie das gesamte Verpackungsmaterial (heben Sie es fr zuknftige Wartungsarbeiten auf) und prfen Sie, ob der mitgelieferte AP1 Empfnger und AF1 oder AG1 Sender auf den gleichen Kanal eingestellt sind (ein vollstndiger Kanalplan ist auf Seite 47 dieses Handbuchs abgedruckt). Wenn die Kanle nicht bereinstimmen, setzen Sie sich mit Ihrem Vertrieb oder - bei Kauf in den USA mit Samson Technical Support unter 1-800-372-6766 in Verbindung. 2. Stellen Sie den AP1 Empfnger dort auf, wo er benutzt wird. Faustregel: Halten Sie Sichtkontakt zwischen Empfnger und Sender, so dass Sie immer den Empfnger sehen knnen, whrend Sie den Sender benutzen. Wenn Sie Signale ber den AP1 in einen Bhnenverstrker einspeisen, sollten Sie den Empfnger auf den Verstrker stellen. 3. Ziehen Sie die AP1 Antennen heraus, stellen Sie sie senkrecht und neigen Sie sie etwas nach auen, um die bestmgliche Reichweite zu erzielen. 4. Stellen Sie sicher, dass der Power On-Off Schalter in Ihrem AF1 oder AG1 Sender auf Off eingestellt ist und dass die 15 dB Dmpfung ebenfalls auf Off steht (Schalter gegen die Richtung des Pfeils). Schieben Sie die Abdeckung des AF1 oder AG1 an der Rippung zurck und heben Sie sie zum Entfernen nach oben. Gehen Sie beim ffnen der Abdeckung bitte vorsichtig vor, da zuviel Kraftaufwand zu Beschdigungen fhren kann. Setzen Sie eine neue (alkalische) Mikrozelle ins Batteriefach ein und achten Sie hierbei auf die Polarittsmarkierungen. Setzen Sie die Batterieabdeckung dann wieder ein und drcken Sie sie vorsichtig fest, bis sie mit einem Klicken einrastet. Schalten Sie den Sender kurz ein, indem Sie den Netz Ein/Aus-Schalter in die Richtung des Pfeils schieben. Wenn die Batterie stark genug ist, blinkt die Power/Battery LED (wenn die LED konstant leuchtet, reicht die Batteriespannung nur noch fr weniger als zwei Stunden und sollte ersetzt werden). Nachdem Sie die Qualitt der Batterie berprft haben, schalten Sie den Sender wieder aus und stecken Sie ihn in Ihre E-Gitarre bzw. Ihren E-Bass. D E U T S C H E 5. Stellen Sie den Netzschalter des AP1 auf Off (entgegen der Richtung des Pfeils), drcken Sie leicht auf den Riegel des AP1 Batteriefachs und ffnen Sie die Klappe des Batteriefachs (wenden Sie beim ffnen oder Schlieen der Klappe nicht zu viel Kraft an die Klappe hat ein Scharnier und sollte nicht komplett abgenommen werden). Setzen Sie eine neue 9-Volt Batterie ein und schlieen 31 Samson AirLine AirLine System einrichten und einsetzen Sie dann vorsichtig die Klappe. Sie knnen auch einen 12-Volt Wechselstromadapter anschlieen (als Sonderzubehr bei Ihrem Samson-Hndler erhltlich). Schalten Sie den AP1 kurz ein, um sicherzustellen, dass die Batterie korrekt eingesetzt wurde (oder dass der Adapter korrekt angeschlossen wurde). Die Ein/leere Batterie LED sollte grn (nicht rot) leuchten. Schalten Sie den AP1 dann aus. 6. Stellen Sie eine Kabelverbindung zwischen der Ausgangsbuchse des AP1 und einem Audioeingang Ihres Verstrkers oder Mischers her. Lassen hierbei Ihren Verstrker oder Mischer ausgeschaltet. 7. Drehen Sie den Pegelregler Ihres AP1 ganz nach links und schieben Sie den Netzschalter dann in Richtung des Pfeils, um den AP1 einzuschalten. Die Netz LED leuchtet konstant grn. 8. Schalten Sie den Sender ein. Die TX / Peak LED des AP1 Empfngers sollte jetzt konstant grn leuchten und dadurch anzeigen, dass er ein nutzbares RF-Signal empfngt und er korrekt ausgerichtet ist. E H C S T U E D 9. Jetzt sollten Sie die Audiopegel einstellen. Schalten Sie Ihren Verstrker und/oder Mischer ein, aber lassen Sie den Pegel ganz zurckgedreht. Stellen Sie den Ausgangspegel Ihrer E-Gitarre bzw. Ihres E-Basses auf das Maximum und spielen Sie mit dem gewohnten Performance-Pegel. Beobachten Sie hierbei die TX/Peak LED des AP1. Wenn die LED auch bei ganz nach links gedrehtem AP1 Pegelregler rot leuchtet (und somit bersteuerungen anzeigt), schalten Sie die 15 dB Dmpfung Ihres Senders ein, indem Sie den Schalter in die Richtung des Pfeils schieben. Andernfalls drehen Sie den AP1 Pegelregler langsam nach rechts bis zu dem Punkt, an dem die TX/Peak LED bei den lautesten Passagen gelegentlich rot blinkt. Drehen Sie den Regler dann etwas zurck. Damit haben Sie den maximalen Geruschspannungsabstand eingestellt. Drehen Sie schlielich den Pegel Ihres Verstrkers und/oder Mischers auf, bis die gewnschte Lautstrke erreicht ist. 10. Wenn Sie Verzerrungen hren oder die TX/Peak LED des AP1 rot leuchtet, obwohl die 15 dB Dmpfung aktiviert und der Pegelregler auf Minimum eingestellt ist (ganz nach links), verringern Sie den Ausgangspegel Ihres Instruments, bis die LED nicht mehr leuchtet. Wenn Sie andererseits ein schwaches, verrauschtes Signal bei dem gewnschten Lautstrkepegel hren, sollten Sie sicher-
stellen, dass Ihr Instrument auf maximalen Ausgangspegel eingestellt ist, dass die 15 dB Dmpfung nicht aktiviert ist und dass der AP1 Pegelregler aufgedreht ist. Wenn Sie Instrumente mit aktiven oder hochpegeligen Tonabnehmern verwenden, sollten Sie den Pegelregler normalerweise auf den markierten Bereich einstellen. 32 AirLine System einrichten und einsetzen Samson AirLine 11. Drehen Sie den Pegel Ihres Verstrkers oder Mischers vorbergehend zurck und schalten Sie Ihren Sender aus. Lassen Sie den AP1 Empfnger eingeschaltet. Stellen Sie dann den zuvor eingestellten Pegel Ihres Verstrkers oder Mischer wieder her. Bei ausgeschal-
tetem Sender sollte der Ausgang des Empfngers vllig stumm sein. In diesem Fall knnen Sie mit dem nchsten Schritt fortfahren. Andernfalls (wenn Sie also Rauschen hren) mssen Sie mglicherweise den Squelch-Regler des AP1 einstellen. Wenn der Squelch-
Regler auf Minimum steht, liefert das AirLine System immer den maximalen Dynamikbereich ohne Ausflle. Abhngig von der speziellen Umgebung, in der Ihr System betrieben wird, mssen Sie diesen Bereich aber vielleicht etwas verringern, um das Rauschband zu eliminieren, wenn der AF1 oder AG1 Sender ausgeschaltet ist. Drehen Sie hierzu den Squelch-Regler mit dem beiliegenden Schraubenzieher ganz nach links (auf die Min Position) und drehen Sie ihn dann langsam nach rechts, bis das Rauschen verschwindet. Wenn bei keiner Position Rauschen auftritt, lassen Sie den Regler auf seiner ganz nach links gedrehten Min Position stehen (um den grtmglichen Dynamikbereich zu erhalten). 12. Wenn Sie Ihr AirLine System in einer neuen Umgebung aufbauen, sollten Sie immer im Performance-Bereich umherlaufen, um sicherzustellen, dass sich die Reichweite der bertragung ber den gesamten Bereich erstreckt. Drehen Sie also den Pegel Ihres Audiosystems zurck und schalten Sie den Sender und Empfnger ein. Stellen Sie dann den Pegel Ihres Audiosystems wieder her, spie-
len Sie auf Ihrer E-Gitarre bzw. Ihrem E-Bass mit normalem Performance-Pegel und laufen Sie in dem gesamten Bereich umher, ber den sich die Reichweite erstrecken soll. Beobachten Sie hierbei die TX/Peak LED des AP1 Empfngers, um sicherzustellen, dass sie konstant grn leuchtet und damit anzeigt, dass ein ausreichend starkes RF-Signal empfangen wird. Versuchen Sie immer, die Entfernung zwischen Sender und Empfnger so klein wie mglich zu halten, damit das strkstmgliche Signal von allen geplanten bertragungspunkten empfangen wird. In bestimmten Umgebungen mssen Sie die Antennen des AP1 vielleicht nicht vertikal, son-
dern in einem anderen Winkel ausrichten. D E U T S C H E Wenn Sie alle obigen Schritte befolgt haben und dennoch Schwierigkeiten auftreten, setzen Sie sich mit Ihrem lokalen Vertrieb oder bei Kauf in den USA mit Samson Technical Support (1-800-372-6766) zwischen 9 Uhr morgens und 5 Uhr abends (eastern standard time) in Verbindung. 33 Samson AirLine Introduccin Bienvenido al Samson AirLine el sistema inalmbrico para el nuevo milenio!. Los micrfonos y los sistemas de instrumentos inalmbricos fueron desarrollados originalmente para eliminar cables y ofrecer una libertad de movimientos incomparable. El AirLine lleva este concepto a un nuevo nivel haciendo que los transmisores sean tan pequeos, ligeros y aerodinmicos que sean prctica-
mente invisibles, lo que le da al usuario una experiencia de total libertad real. Para crear los transmisores inalmbricos ms pequeos del mundo, hemos desarrollado una tecnologa nueva y exclusiva. Con una circuitera en miniatura y la capacidad de funcionar con una nica pila pequea de tipo AAA (con una duracin tpica de 14 horas), estos transmisores tambin ofrecen una mejora en cuanto a recepcin inalmbrica y calidad de sonido. Y adems, el receptor AP1 desarrollado especialmente para el sistema de guitarra Airline es de hecho ms pequeo que los transmisores inalmbricos tpicos El sistema UHF de guitarra AirLine de Samson descrito en este manual ha sido diseado para sustituir los cables entre su guitarra o bajo elctrico y su amplificador de escenario o mesa PA, permitindole as moverse por el escenario o incluso mezclarse entre el pblico en mitad de su actuacin! Este sistema funciona en el rango de frecuencias UHF algo libre de 801 - 805 MHz y contiene un receptor AP1 de tipo pedal y uno de entre dos modelos de microtransmisores de conexino bien el AF1 (diseado para adaptarse a conectores de tipo bajante como el de las guitarras Fender Stratocaster) o el AG1 (que se adapta al resto de conectores de guitarra standard). En este manual encontrar una descripcin detallada de todas las caractersticas y funciones de su sistema AirLine, as como recorridos guiados a travs de todos sus componentes, instrucciones paso-a-paso para la configuracin y ajuste de su sistema y un completo cuadro de especificaciones tcnicas. Si su sistema AirLine fue adquirido en los Estados Unidos, tambin encontrar una tarjeta de garanta no olvide rellenarla y devolvrnosla por correo! Eso har que pueda recibir soporte tcnico online y que le podamos facilitar informacin actualizada de este y otros productos Samson en el futuro. Si su sistema AirLine fue adquirido fuera de los Estados Unidos, contacte con su distribuidor local para que le indique los detalles de su garanta. Adems, no deje de visitar nuestra pgina web (http://www.samsontech.com) para tener una completa informacin sobre toda nuestra lnea de productos. NOTA ESPECIAL para los compradores de los Estados Unidos: Para el improbable caso de que su sistema AirLine deba ser reparado en algn momento, le ser necesario un nmero de autorizacin (RA). Sin este nmero, la unidad no ser aceptada en fbrica. Si ha adquirido este sistema en los Estados Unidos, llame al nmero de telfono 1-800-372-6766 para solicitar su nmero de autorizacin antes de devolvrnoslo. Si es posible, envenos la unidad dentro del embalaje y protectores originales. Si ha comprado su sistema AirLine fuera de los EE.UU., pngase en contacto con su distribuidor Samson. L O A P S E 34 Arranque rpido Samson AirLine Si ya tiene alguna experiencia previa en el uso de sistemas inalmbricos, estas instrucciones de Arranque rpido harn que se ponga en marcha con su sistema UHF de guitarra AirLine en cuestin de un par de minutos!. En la pgina 42 de este manual encontrar instrucciones detalladas acerca del ajuste y uso de su sistema AirLine; de la misma forma, las secciones de Recorrido guiado en las pginas 37 - 41 le darn una descripcin completa de todos los controles e indicadores que forman su AirLine. 1. Asegrese que el receptor AP1 incluido y el transmisor AF1 o AG1 estn ajustados de fbrica al mismo canal. 2. Site fsicamente el receptor AP1 en el lugar que lo vaya a usar y extienda verticalmente sus antenas y seprelas. 3. Coloque el interruptor de encendido del transmisor AF1 o AG1 en la posicin off (lejos de la flecha) e introduzca una pila AAA nueva en l. Despus encienda momentneamente el transmisor; su piloto parpadear una vez y despus se apagar si la pila tiene suficiente carga. Una vez que haya verificado la carga de la pila, vuelva a apagar el transmisor y despus conctelo en su guitarra o bajo elctrico. 4. Abra el compartimento de la pila del AP1 pulsando sobre la muesca y coloque una pila nueva; si lo prefiere, puede usar una fuente de alimentacin opcional. Encienda momentneamente el AP1 para confirmar que ha colocado la pila correctamente (o que ha conectado correctamente el adaptador); el piloto On/Battery Low debera iluminarse en verde y no en rojo. Despus de comprobar esto, apague el AP1. 5. Apague el amplificador o mesa de mezclas y realice la conexin fsica del cable entre una entrada audio y el conector de salida del AP1. 6. Gire el mando de nivel del AP1 completamente a la izquierda y despus encienda la unidad; el piloto Power se quedar iluminado en verde. E S P A O L 35 Samson AirLine Arranque rpido 7. Encienda su transmisor AF1 o AG1. El piloto TX/Peak en el receptor AP1 debera iluminarse en verde para indicar que est recibiendo una seal RF vlida y que est colocado y situado correctamente. 8. Encienda el amplificador o mezclador al que tenga conectado el receptor pero mantenga su volumen totalmente abajo. Ajuste el nivel de salida de su instrumento al mximo y comience a tocar a un nivel de ejecucin normal mientras observa el piloto TX/Peak del AP1. Si el piloto se enciende en rojo (indicando una condicin de pico) incluso con el control de nivel del AP1 totalmente a la izquierda, active el parche de 15 dB del transmisor. Si no es as, gire lentamente el control de nivel hacia la derecha hasta el punto en el que el piloto TX/Peak parpadee ocasionalmente en rojo durante los pasajes ms fuertes, y despus bjelo solo un poco. Finalmente, suba el nivel del amplificador y/o mezclador al que est conectado hasta que consiga el volumen que quiera. 9. Vaya paseando por el rea de cobertura deseada mientras observa el piloto TX/Peak del receptor; debera continuar iluminado en verde, indicando as una recepcin RF suficiente en todos los puntos del rea de cobertura. Si no es as, recoloque el AP1 o sus antenas si es necesario. 10. Si escucha cualquier ruido espreo de la salida del receptor cuando el transmisor est apagado, utilice el destornillador de plstico que incluimos para ajustar el control Squelch del AP1, girndolo lentamente hacia la derecha hasta el punto en el que desaparezca el ruido. L O A P S E 36 Recorrido guiado Receptor AP1 Samson AirLine 1: Interruptor Power Mueva este interruptor en la direccin de la flecha para encender el AP1; desplcelo en el sentido opuesto para apagar la unidad. 2: Piloto Power On / Battery Low Este piloto LED se ilumina en verde siempre que el AP1 est encendido y se enciende en rojo cuando la pila del AP1 se est quedando sin carga. Para evitar deterioros de la fidelidad de sonido (o que el AP1 deje de funcionar del todo), siempre debera cambiar la pila por una nueva justo despus de que este piloto se ilumine en rojo. 3: Piloto TX / Peak Este piloto se ilumina en verde cuando el AP1 est reci-
biendo una seal RF desde un transmisor y se ilumina en rojo cuando la seal de salida desde el AP1 est llegando a la saturacin (es decir, cuando est a punto de distorsionar). Si observa este piloto en rojo durante el funcionamiento normal, disminuya el nivel de volumen de su instrumento o active el parche de 15 dB del transmisor. Para una mayor informacin, vea la seccin titulada Ajuste y uso de su sistema AirLine en la pgina 42 de este manual. 4: Control Level Este mando ajusta el nivel de la seal audio que est siendo emitida a travs del conector de salida del AP1 (vea el punto 9 de la pgina 6). Cuando utilice una guitarra o bajo elctrico con una pastilla activa o de nivel alto, ajuste el mando en la zona marcada. Para una mayor informacin, vea la seccin titulada Ajuste y uso de su sistema AirLine en la pgina 42 de este manual. 1 4 6 37 2 3 POWER ON BATT. LOW TX PEAK ACTIV E LEVEL
H I L E V E L P IC KUPS 5 AP1 UHF RECEIVER OPEN E S P A O L Samson AirLine Recorrido guiado Receptor AP1 POWER ON BATT. LOW TX PEAK LEVEL ACTIV E
H I L E V E L P IC KUPS AP1 UHF RECEIVER 7 8 SAMSON L O A P S E 5: Antenas El montaje giratorio permite una rotacin completa para una colocacin ptima de las dos antenas del AP1. En condiciones normales de funcionamiento, ambas antenas deberan ser colocadas en posicin vertical y separadas ligeramente hacia fuera. Para mayor comodidad durante el transporte, puede plegarlas dentro de s mismas. Para una mayor informacin acerca de la colocacin de las antenas, vea la seccin titulada Ajuste y uso de su sistema AirLine en la pgina 42 de este manual. 6: Muesca del compartimento de pila Pulse ligeramente sobre esta muesca para abrir el compartimento de la pila del AP1 (vea el punto 7 siguiente). 7: Compartimento de la pila Introduzca una pila alcalina de 9 voltios standard, asegurndose de colocar correctamente las marcas de polaridad ms y menos. Le recomendamos pilas del tipo Duracell MN 1604. Aunque puede usar tambin pilas recargables de Ni-Cad, estas no suministran corriente adecuada para ms de cuatro horas. PRECAUCION: Nunca coloque la pila al revs; el hacerlo podra producir daos graves en el AP1 y anulara la garanta. Tenga en cuenta que tambin puede conectar el AP1 a la corriente elctrica por medio del adaptador de corriente opcional de 12 voltios disponible a travs de su distribuidor Samson (vea el punto 10 de la pgina siguiente). 8: Destornillador de plstico Diseado especialmente para su uso en el ajuste del control Squelch del AP1 (vea el punto 11 de la pgina siguiente). Para una mayor informacin, vea la seccin titulada Ajuste y uso de su sistema AirLine en la pgina 42 de este manual. 38 Recorrido guiado Receptor AP1 Samson AirLine 9: Clavija de salida - Use este conector standard de 6,3 mm no balanceado y de alta impedancia (5 - 10 KOhmnios) para conectar el AP1 a su amplificador o mezclador audio. El cableado interno es: punta activo, lateral masa. 10: Entrada DC Conecte aqu un adaptador de corriente opcional de 12 voltios 200 mA (disponible a travs de su distribuidor Samson). PRECAUCION: Nunca utilice ningn otro tipo de adaptador de corriente; el hacerlo podra producir daos graves al AP1 y anulara la garanta. Tenga en cuenta que tambin puede suministrar corriente al AP1 con pilas (vea el punto 7 de la pgina anterior y la seccin titulada Ajuste y uso de su sistema AirLine en la pgina 42 de este manual). 11: Control Squelch Este control determina el rango mximo del AP1 antes del desbordamiento de la seal audio. Aunque puede ajustarlo usando el destornillador de plstico incluido, normalmente debera dejarlo en su ajuste de fbrica. Para una mayor informacin, vea la seccin titulada Ajuste y uso de su sistema AirLine en la pgina 42 de este manual. 10 39 OUTPUT 9 MIN MAX SQUELCH DC INPUT 12 VDC 11 E S P A O L Samson AirLine Recorrido guiado Transmisor AF1 / AG1 2 3 4 5 1 AF1 15dB PAD POWER Nota: Los transmisores AF1 y AG1 son totalmente idnticos en cuanto a funciones si exceptuamos el conector de 6,3 mm en ngulo de uno de ellos. En todas las ilustraciones, solo mostraremos el modelo AF1. 1: Conector Inserte este conector standard de 6,3 mm en su guitarra o bajo elctrico. Tenga en cuenta que el ngulo del conector es distinto en el AF1 (diseado para su uso con instrumentos que tengan conectores en bajante del tipo Fender Stratocaster) que en el AG1 (diseado para su uso con el resto de instrumentos con conectores de extremo). 2: Piloto Power / Battery Este piloto parpadea una vez cuando enciende por primera vez el AF1 o AG1 y queda iluminado en rojo cuando quedan menos de dos horas de carga de la pila, indicando que debe cambiarla. Para evitar deterioros de la fidelidad de sonido (o que el AF1 / AG1 deje de funcionar del todo), siempre debera cambiar la pila por una nueva justo despus de que este pilo-
to se ilumine en rojo. L O A P S E 40 Recorrido guiado Transmisor AF1 / AG1 Samson AirLine 3: Parche de 15 dB Mueva este interruptor en la direccin de la flecha para reducir la salida del AF1 o AG1 en 15 dB cuando su instrumento est dando salida a una seal demasiado fuerte. Para una mayor informacin, vea la seccin titulada Ajuste y uso de su sistema AirLine en la pgina 42 de este manual. 4: Interruptor Power Desplace este interruptor en la direccin de la flecha para encender la unidad; muvalo en el sentido opuesto para apagar el AF1 o AG1. 5: Antena Debera extender completamente esta antena flexible fija en condiciones normales de uso. Para una mayor informacin acerca de la colocacin de las antenas, vea la seccin titulada Ajuste y uso de su sistema AirLine en la pgina 42 de este manual. 6: Tapa de la pila Tire hacia atrs suavemente de esta tapa en la muesca y despus hacia fuera para sacarla. Para una mayor informacin, vea la seccin titulada Ajuste y uso de su sistema AirLine en la pgina 42. 7: Compartimento de la pila - Introduzca una pila alcalina AAA voltios standard, asegurndose de colocar correctamente las marcas de polaridad ms y menos. Le recomendamos pilas del tipo Duracell. Aunque puede usar tambin pilas recargables de Ni-Cad, estas no suministran corriente adecuada para ms de cuatro horas. PRECAUCION: Nunca coloque la pila al revs; el hacerlo podra produ cir daos graves en el AP1 y anulara la garanta. 41 N O S M A S AF1 15dB PAD PO WER 6 7 E S P A O L Samson AirLine Ajuste y uso de su sistema AirLine El procedimiento bsico de ajuste y uso de su sistema AirLine solo le llevar unos pocos minutos:
1. Para que su sistema AirLine funcione correctamente, tanto el receptor como el transmisor debern estar ajustados al mismo canal. Quite todos los embalajes (gurdelos por si los necesitase en el futuro) y compruebe que tanto el receptor AP1 como el transmisor AF1 o AG1 estn ajustados al mismo canal (en la pgina 47 de este manual puede ver un plano completo de los canales). Si estos canales no coinciden, contacte con su distribuidor o, si adquiri el aparato en los Estados Unidos, con el departamento de soporte tcnico de Samson en el telfono 1-800-372-6766. 2. Coloque fsicamente el receptor AP1 en el lugar en el que lo vaya a usar. La regla de oro principal es mantener siempre la lnea de visin entre el receptor y el transmisor de tal forma que la persona que est usando o que lleve el transmisor pueda ver siempre el receptor. Si est usando el AP1 para dar seal a un amplificador de escenario, una buena sugerencia sera que lo colocase justo encima de l. 3. Extienda las antenas del AP1 y colquelas en vertical, separndolas un poco hacia fuera para tener la mxima cobertura posible. 4. Asegrese de que el interruptor de encendido on-off de su transmisor AF1 o AG1 est ajustado a "Off" y que el parche de 15 dB tambin est desconectado (en sentido opuesto a la flecha). Tire hacia atrs suavemente en la muesca de la tapa de la pila del AF1 o AG1 y despus hacia fuera para sacarla. Tenga cuidado al abrir esta tapa dado que si usa demasiada fuerza puede daarla. Introduzca una pila alcalina AAA nueva en el compartimento de la pila, asegurndose de respetar las marcas de polaridad. Despus vuelva a colocar con cuidado la tapa de la pila y empjela suavemente hasta que haga un clic. Momentneamente encienda el transmisor deslizando su interruptor Power on-off en la direccin de la flecha; el piloto Power/Battery parpadear si la pila tiene suficiente carga (si se queda iluminado fijo es que a la pila le quedan menos de dos horas de carga y que debera cambiarla). Una vez que haya verificado la carga de la pila, apague de nuevo el transmisor y conctelo a su guitarra o bajo elctrico. 5. Con el interruptor de encendido del AP1 colocado en la posicin Off (lejos de la flecha), empuje suavemente sobre la muesca L O A P S E 42 Ajuste y uso de su sistema AirLine Samson AirLine del compartimento de la pila del AP1 y abra la tapa del mismo (no use demasiada fuerza cuando abra o cierre la tapa de la pila; tiene un gozne de cierre y no debe ser separada de la carcasa). Introduzca una pila alcalina de 9 voltios nueva y despus cierre con cuidado la tapa del compartimento de la pila. De forma alternativa, tambin puede conectar un adaptador de corriente AC de 12 voltios (disponible de forma opcional en su distribuidor Samson). Encienda momentneamente el AP1 para confirmar que ha colocado correctamente la pila (o que ha conectado de forma adecuada el adaptador); el piloto On/Battery Low se debera iluminar en verde y no en rojo. Si es as, vuelva a apagar el AP1. 6. Realice la conexin fsica del cable entre el conector de salida del AP1 y una entrada audio de su amplificador o mezclador. Deje su amplificador o mesa de mezclas apagados por el momento. 7. Gire el mando de nivel del AP1 completamente a la izquierda y despus mueva su interruptor de encendido en la direccin de la flecha para encenderlo. El piloto Power On se quedar iluminado en verde. 8. Encienda el transmisor. El piloto TX / Peak del receptor AP1 debera iluminarse ahora en verde, indicando que est recibiendo una seal RF vlida y que est colocado y situado correctamente. 9. Ahora ha llegado el momento de ajustar los niveles audio. Encienda el amplificador y/o mezclador pero deje su volumen completamente abajo. Ajuste el nivel de salida de su guitarra elctrica o bajo al mximo y comience a tocar a un nivel de ejecucin normal mientras va observando el piloto TX/Peak del AP1. Si el piloto se ilumina en rojo (indicando una condicin de pico) incluso con el control de nivel del AP1 completamente a la izquierda, active el parche de 15 dB en su transmisor deslizando ese interruptor en la direccin de la flecha. Si no ocurre as, gire lentamente el control de nivel del AP1 hacia la derecha hasta el punto en el que el piloto TX/Peak solo se ilumine ocasionalmente en rojo durante los pasajes ms fuertes, y despus disminuya de nuevo ligeramente el nivel, asegurndose as la mejor relacin seal-ruido. Finalmente, aumente el nivel de su amplificador y/o mezclador hasta que consi-
ga el nivel de volumen deseado. E S P A O L 43 Samson AirLine Ajuste y uso de su sistema AirLine 10. Si escucha cualquier distorsin o si el piloto TX/Peak del AP1 se ilumina en rojo incluso con el parche de 15 dB activado y el control de nivel al mnimo (completamente a la izquierda), reduzca el nivel de salida de su instrumento hasta que el piloto ya no se ilumine. De forma opuesta, si escucha una seal pobre y con ruidos al nivel de volumen deseado, asegrese de que su instrumento est ajustado al mximo nivel de salida, que el parche de 15 dB no est activado y que el control de nivel del AP1 est arriba. Cuando est usando instrumentos con pastillas activas o de alto nivel, debera colocar normalmente el control de nivel en la regin marcada. 11. Disminuya temporalmente el nivel de su mezclador o amplificador y apague su transmisor, dejando el receptor AP1 encendido. Restaure entonces el nivel ajustado anteriormente en su amplificador o mezclador. Con el transmisor apagado, la salida del receptor debera ser totalmente silenciosa; si es as, pase al siguiente paso. Si esto no se produce (es decir, si escucha algn tipo de ruido), puede que tenga que ajustar el control Squelch del AP1. Cuando el control Squelch est en su valor mnimo, el sistema AirLine siempre suministra el rango mximo sin desbordamientos; no obstante, dependiendo del entorno concreto en que utilice su sistema, puede que tenga que reducir algo el rango de cara a eliminar el ruido de banda que se produce cuando el transmisor AF1 o AG1 estn apagados. Para hacer esto, use el destornillador que se incluye para girar el control Squelch completamente a la izquierda (a la posicin Min) y despus grelo lentamente a la derecha hasta que el ruido desaparezca. Si no escucha ningn ruido en ningu-
na de las posiciones, deje este control en la posicin de ms a la izquierda Min (para tener el mximo rango global posible). 12. Cuando utilice por primera vez su sistema AirLine en un nuevo entorno, siempre resulta una buena idea dar una vuelta para asegurarse que el sistema le ofrece cobertura en toda la zona de la actuacin. De acuerdo a esto, disminuya el nivel de su sistema audio y encienda tanto el transmisor como el receptor. Despus vuelva a ajustar el nivel de su sistema audio al mismo valor anterior y mientras toca en su guitarra o bajo elctrico a un nivel normal de ejecucin, vaya dando una vuelta por toda la zona que quiera cubrir. Mientras va haciendo esto, observe el piloto TX/Peak en el receptor AP1 y asegrese que se ilumina en verde, indicando que est recibiendo una seal RF suficientemente fuerte. Trate siempre de reducir al mnimo la distancia entre el transmisor y el receptor para conseguir la seal ms fuerte posible desde todos los puntos de transmisin posibles. En determinados entornos, puede que sea recomendable cambiar el ngulo de las antenas del AP1 y hacer que no estn en posicin vertical. Si ha seguido todos los pasos anteriores y tiene cualquier tipo de problemas, contacte con su distribuidor local o, si compr el aparato en los Estados Unidos, llame por telfono al departamento de soporte tcnico de Samson (1-800-372-6766) en horario de 9 AM a 5 PM EST. 44 L O A P S E Guided Tour - UR1 Receiver / Front Panel Samson AirLine 1: Antennas (A and B) - The antenna mountings allow full rotation for optimum placement. In normal operation, both Antenna A (the antenna on the left) and Antenna B (the antenna on the right) should be placed in a vertical position. Both antennas can be folded inward for convenience when transporting the UR1. See the Setting Up and Using the AirLine System section on page 16 in this manual for information about antenna installation and positioning. 1 3 4 5 4 1 6 SAMSON UHF RECEIVER 2 7 8 2: AF (Audio Frequency) Level control - This knob sets the level of the audio signal being output through both the balanced and unbalanced output jacks on the rear panel (see #2 and #4 on page 8 in this manual). Reference level is obtained when the knob is turned fully clockwise (to its 10 setting). 3: Peak LED - This LED lights yellow when output signal from the UR1 is at the onset of clipping (that is, when it is on the verge of being distorted). If you see this light during operation, move the microphone further away or lower the output level of your instrument or transmitter. For more information, see the section entitled Setting Up and Using the AirLine System on page 16 in this manual. 45 Samson AirLine Guided Tour - UR1 Receiver / Front Panel 4: A/B Receiver LEDs - When signal is being received, one of these will be lit green, showing you whether the (left) A or (right) B receiver is currently being used. The UR1 constantly scans its two antennas and automatically selects whichever is receiving the strongest, clearest signal. This True Diversity switching is completely inaudible, but it effectively increases overall range while virtually eliminating potential interference and phase cancellation problems. 5: RF (Radio Frequency) Level meter - This five-segment meter (similar to the VU bar meter used on audio devices) indicates the strength of the UHF signal being received. When all segments are lit, the incoming RF signal is at optimum strength; when only the left-most segment is lit, the incoming RF signal is at minimum strength. If no segments are lit, no signal is being received; check to ensure that the transmitter is on and that it is set to the same channel as the UR1. See the Setting Up and Using the AirLine System section on page 16 in this manual for more information. 6: Power LED - This lights red whenever the UR1 is turned on. 7: Mute (squelch) control - This control determines the maximum range of the UR1 before audio signal dropout. Although it can be adjusted using the supplied plastic screwdriver, it should normally be left at its factory setting. See the Setting Up and Using the AirLine System section on page 16 in this manual for more information. 8: Power switch - Use this to turn the UR1 power on and off. When the receiver is on, the Power LED (see #6 above) is lit. 46 Guided Tour - UR1 Receiver / Rear Panel Samson AirLine 1: DC input - Connect the supplied 12 volt 160 mA power adapter here, using the strain relief as shown in the illustration below. WARNING: Do not substitute any other kind of power adapter; doing so can cause severe damage to the UR1 and will void your warranty. 2: Unbalanced output* - Use this unbalanced high impedance (5K Ohm) 1/4" jack when connecting the UR1 to consumer (-10) audio equipment. Wiring is as follows: tip hot, sleeve ground. 1 2 3 4 DC INPUT UNBALANCED OUTPUT
CAUTION:
USE SAMSON AC ADAPTOR ONLY
-10dB 5K CABLE LOCK: LOOP THRU AND TIE BALANCED SWITCH BALANCED OUTPUT LINE:
-20dBm600 MIC:
-40dBm600 MIC LINE POWER RATING DC 12V, 1.9W(160mA) XLR:
1 GND 2 HOT 3 COLD K C O L E L B A C C A 3: Audio Output Level switch - Sets the audio output level attenuation of the balanced output (see #4 below) to
-20 dBm (line level) or -40 dBm
(mic level). See Setting Up and Using the AirLine System on page 16.
4: Balanced output* - Use this electronically balanced low impedance (600 Ohm) XLR jack when connecting the UR1 to professional
(+4) audio equipment. Pin wiring is as follows: Pin 1 ground, Pin 2 high (hot), and Pin 3 low (cold).
* If required, both the unbalanced and balanced outputs can be used simultaneously. 47 Samson AirLine Transmitter (AF1 / AG1) RF Output Power (5mW) Frequency Stability Spurious Modulation Factor Pre-emphasis Maximum Input Level Input Impedance THD Audio Frequency Response Operating Power Voltage Current Consumption Battery Life Output Antenna Controls Indicators Receiver (AP1) Receiving Frequencies Frequency Type Modulation Type Type of Reception OSC (Oscillator) System Local Oscillator Frequency Specifications
-4dB Minimum, +3dB Maximum
-40kHz Minimum, 40kHz Maximum 1W 13kHz Minimum, 15kHz Typical, 17kHz Maximum, Input 1kHz-10dBv 50 sec
+2 dBv 2K ohms
< 2% (1 kHz deviation 15kHz) 50Hz - 15kHz (3.5 dB) 1.5V Typical, 1.05V Minimum, 2V Maximum 60mA Typical 14 Hours (AAA size battery) 6.3mm / 1/4 in. mono Jack Permanently attached 1/4 wave length wire Power Switch, 15 dB Pad Switch Power On (LED Flash), Low Battery (LED On when battery less than 1.1V) USA 801-805MHz (U1-U6), One frequency in Channel Plan F3E Variable Reactance Modulation Single superheterodyne Crystal controlled OSC (oscillator) 79MHz Range 48 Intermediate Frequency Operating Distance Noise Reduction Deemphasis Output Connector Power Input Jack Operating Temperature Storage Temperature Receiving Sensitivity Squelch Sensitivity S/N Ratio
(when comparing to S=0dBv) Audio Output Level at div. f15 kHz Maximum Output Level Audio Frequency Response THD (at SG output 56 dBuv) Output Impedance Power Current Consumption Peak LED Lighting div. frequency Antenna Controls Display Specifications Samson AirLine 10.7 MHz 100m (328 ft) receiver in sight Compander type 50/sec 6.3mm / 1/4 in diameter phone jack (unbalanced) 5.5mm/.21in diameter 0C +50C
-20C +70C More than S/N60 dB (less than 2%) at 21 dBuv input 17dBuv 4dBuv More than 95dB (IHF-A) More than 90dB (IHF-A) Unbalanced output 0dBv Audio OUT +8dBv 3dB at 3% distortion div. f36kHz 50Hz 15kHz (at 30dBv 4dB output) less than 1% (at div. f20kHz AF 1 kHz) Unbalanced output 5K 10K ohms, Balanced output 600K 2.5K ohms AC adapter (12DVC/more than 200mA) or 9 V battery Less than 70mA Max Div. f23kHz 3kHz (at AF output approx. +7dBv) Dual 1/4 wave length rod antennas Audio level volume (front) Squelch level volume (rear) 2-color LED x 2 Power On (Green) / Batt (Red) + TX (Green) / Peak (Red) 49 Samson AirLine Mid frequencies:
System Features Channel Frequency U1 U2 U3 U4 U5 U6 801.375 MHz 801.875 MHz 803.125 MHz 803.750 MHz 804.500 MHz 804.750 MHz 50 FCC Rules and Regulations Samson wireless systems are type accepted under FCC rules parts 90, 74 and 15. Licensing of Samson equipment is the users responsibility and licensability depends on the users classification, application and frequency selected. This device complies with RSS-210 of Industry & Science Canada. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation.
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2001-02-23 | 801.375 ~ 804.75 | TNB - Licensed Non-Broadcast Station Transmitter | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2001-02-23
|
||||
1 | Applicant's complete, legal business name |
Sam Ash Music Corporation
|
||||
1 | FCC Registration Number (FRN) |
0009055401
|
||||
1 | Physical Address |
262 Duffy Avenue
|
||||
1 |
Hicksville, New York 11801
|
|||||
1 |
United States
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
r******@elitetest.com
|
||||
1 | TCB Scope |
B2: General Mobile Radio And Broadcast Services equipment in the following 47 CFR Parts 22 (non-cellular) 73, 74, 90, 95, 97, & 101 (all below 3 GHz)
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
CCR
|
||||
1 | Equipment Product Code |
AF1M
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
D****** A****
|
||||
1 | Telephone Number |
516 3********
|
||||
1 | Fax Number |
516 3********
|
||||
1 |
d******@samsontech.com
|
|||||
app s | Technical Contact | |||||
1 | Firm Name |
Relif Testing Laboratories
|
||||
1 | Name |
T****** J******** S******
|
||||
1 | Physical Address |
795 Marconi Avenue
|
||||
1 |
Ronkonkoma, New York 11779
|
|||||
1 |
United States
|
|||||
1 | Telephone Number |
(631)********
|
||||
1 |
L******@aol.com
|
|||||
app s | Non Technical Contact | |||||
1 | Firm Name |
Relif Testing Laboratories
|
||||
1 | Name |
M**** W******
|
||||
1 | Physical Address |
795 Marconi Avenue
|
||||
1 |
Ronkonkoma, New York 11779
|
|||||
1 |
United States
|
|||||
1 | Telephone Number |
(631)********
|
||||
1 |
L******@aol.com
|
|||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | TNB - Licensed Non-Broadcast Station Transmitter | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Airline UHF Wireless System | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
Retlif Testing Laboratories
|
||||
1 | Name |
M**** B****
|
||||
1 | Telephone Number |
631-7******** Extension:
|
||||
1 | Fax Number |
631-7********
|
||||
1 |
c******@retlif.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 74 | M4 | 801.37500000 | 804.75000000 | 0.0015000 | 0.0050000000 % | 95K6F3E |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC