all | frequencies |
|
|
exhibits | applications |
---|---|---|---|---|---|
manuals |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 2 |
|
UM1 | Users Manual | 3.47 MiB | / May 08 2019 | |||
1 2 |
|
UM2 | Users Manual | 3.46 MiB | / May 08 2019 | |||
1 2 | Block diagram | Block Diagram | July 31 2019 | confidential | ||||
1 2 | Test Report | May 08 2019 | ||||||
1 2 |
|
EXT PHO | External Photos | 542.24 KiB | / May 08 2019 | |||
1 2 | Attestation Statements | May 08 2019 | ||||||
1 2 | Cover Letter(s) | / May 08 2019 | ||||||
1 2 | Cover Letter(s) | / May 08 2019 | ||||||
1 2 |
|
INT PHO | Internal Photos | 1.20 MiB | May 08 2019 | |||
1 2 | ID Label/Location Info | / May 08 2019 | ||||||
1 2 | Operation Description | Operational Description | July 31 2019 | confidential | ||||
1 2 | RF Exposure Info | / May 08 2019 | ||||||
1 2 | SCH | Schematics | July 31 2019 | confidential | ||||
1 2 | Test Setup Photos | / May 08 2019 | ||||||
1 2 | Test Report | May 08 2019 | ||||||
1 2 | Cover Letter(s) | January 08 2019 / May 08 2019 | ||||||
1 2 | Cover Letter(s) | January 08 2019 / May 08 2019 | ||||||
1 2 | OP | Operational Description | August 01 2019 | confidential |
1 2 | UM1 | Users Manual | 3.47 MiB | / May 08 2019 |
EXPEDITION XP3S10Ww 300-WATT PORTABLE PA SYSTEM Owner's Manual SAMSON Copyright 2019 v1 Samson Technologies Corp. 278-B Duffy Ave Hicksville, New York 11801 www.samsontech.com The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Samson Technologies is under license. Other trademarks and trade names are those of their respective owners. Important Safety Information AVIS RISQUE DE CHOC ELECTRONIQUE -
NE PAS OUVRIR a risk of electric shock. This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of non-insulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance instructions in the literature accompanying the appliance. WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) AS THERE ARE NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. There is a separate collection system for used electronic products in accordance with legislation that requires proper treatment, recovery and recycling. Private household in the 28 member states of the EU, in Switzerland and Norway may return their used electronic products free of charge to designated collection facilities or to a retailer (if you purchase a similar new one). et If you want to dispose this product, do not mix it with general household waste. Ea For Countries not mentioned above, please contact your local authorities for a correct method of disposal. By doing so you will ensure that your disposed product undergoes the necessary treatment, recovery and recycling and thus prevent potential negative effects on the environment and human health. XP310w Portable PA System 3 Important Safety Information NOabhoan =
10. 11. 12. 13. 14, 15. 16. 17. 18. 19. 20. 21. 22. 23. Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. Do not defeat the safety purpose of the polarized or grounding type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. Protect the power cord from being walked on or pinched particularly at the plugs, convenience receptacles, and at the point where they exit from the apparatus. Only use attachments/accessories specified by the manufacturer. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. Unplug the apparatus during lightening storms or when unused for long periods of time. Refer all servicing to qualified personnel. Service is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. This appliance shall not be exposed to dripping or splashing water and that no object filled with liquid such as vases shall be placed on the apparatus. Caution-to prevent electrical shock, match wide blade plug wide slot fully insert. Please keep a good ventilation environment around the entire unit. To prevent injury, this apparatus must be securely attached to the stand in accordance with the installation instructions. WARNING: The battery (battery or batteries or battery pack) shall not be exposed to excessive heat such as sunshine, fire or the like. CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. WARNING: The mains plug/appliance coupler is used as disconnect device, the disconnect device shall remain readily operable. Battery disposal should be drawn to environmental aspects and should be according to local law requirements. No naked flame sources, such as lighted candles, should be placed on the apparatus. Important Safety Information FCC Notice 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
. Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. RF Warning Statement The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. This device complies with RSS-310 of Industry Canada. Operation is subject to the condition that this device does not cause harmful interference. Hereby, Samson Technologies Corp., declares that this Expedition XP310w is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. The declaration of conformity may be consulted at:
http:/Avww.samsontech.com/site_media/support/manuals/XP310w_DOC. pdf XP310w Portable PA System 5 Introduction Thank you for purchasing the XP310w battery-powered portable sound system, featuring wireless Bluetooth connectivity. Lightweight and compact, the XP310w features 300 watts of power weighing only 27.5 pounds, making it an excellent complement to any mobile speaker application. The internal rechargeable battery provides up to 12 hours of continuous use. The XP310w can also be AC powered (with the included power cord). The locking telescopic handle and integrated wheels, make the XP310w easy to transport to any outing. The XP310w is a complete all-in-one solution providing the flexibility of a four-channel mixer (with inputs for microphones and line level devices), a line output for linking multiple speakers, and Voiceover priority ducking. For a completely untethered performance, the XP310w includes a Samson Concert 88a Handheld Wireless system and an additional slot to add a second Concert 88a system. There is also a USB jack for adding a Samson XPD Series wireless system. Whether you are looking for a sound system for use outdoors, in the classroom, for karaoke, for presentations, or performing live music, the XP310w provides high quality, portable audio in a small self-powered package. We recommend you keep the following records for reference, as well as a copy of your sales receipt. Serial number: _ Date of purchase:
If you have any questions or comments regarding the XP310w Portable PA System or any other products from Samson, do not hesitate to contact us at support@samsontech.com. With proper care and maintenance, your XP310w Portable PA System will operate trouble-
free for many years. Should your XP310w Portable PA System ever require servicing, a Return Authorization (RA) number must be obtained before shipping your unit to Samson. Without this number, the unit will not be accepted. Please visit www.samsontech.com/ra for an RA number prior to shipping your unit. Please retain the original packing materials and, if possible, return the unit in its original carton. If your XP310w Portable PA System was purchased outside of the United States, contact your local distributor. Features e 300 watt, all-in-one portable PA system that weighs 27.51b e = 2-way speaker enclosure with 10 woofer and 1 tweeter e Internal rechargeable lithium ion battery for up to 12 hours of continuous use e Bluetooth connectivity to connect wireless music sources e Includes Concert 88a Handheld Frequency-agile UHF Wireless System e Top-mounted 4-channel mixer with microphone and line level inputs e Master Bass and Treble EQ e = Variable reverb control for mic/wireless inputs e Voiceover control with priority ducking e Line output to daisy-chain multiple systems together e USB wireless port for use with Samson XPD Series USB Digital Wireless Systems e Locking telescopic handle and smooth rolling wheels for easy transport e =. 1 3/8 speaker stand mount e Two integrated microphone holders for wireless mic storage XP310w Mixer Callouts 1. 10. 11. 12. 13. 14, 15. 16. 17. 18. 19. 20. MASTER VOLUME - Used to control the overall level of the speaker system. MASTER BASS - Controls the low-frequency tone of the entire system. MASTER TREBLE - Controls the high-frequency tone of the entire system. CH1 VOLUME - Controls the level of the Channel 1 Mic/
Line input. LINE / MIC Switch - Adjusts the gain of the CH1 input for a microphone or line level device. CH1 Input - XLR-L4 input for connecting a microphone or a device with a line level signal. CH2 VOLUME - Controls the level of the Channel 2 Aux input. AUX IN - Connect a line level device using a 1/8 audio cable. CH3 WIRELESS VOLUME - Controls the level of the Concert 88a wireless microphone receivers as well as the optional XPD USB wireless receiver. XPD WIRELESS Input - Connect a Samson XPD USB digital wireless receiver to this input. The wireless receiver gets its power from the XP310w, so no additional power supply is needed. REVERB - This knob is used to adjust the total amount of reverb added to Channel 1 and Channel 3 (wireless) input channels. BLUETOOTH VOLUME - Controls the level of the Bluetooth input. PAIR Button - Press this button to enable pairing mode in order to connect to a Bluetooth audio device. Pairing Indicator - Displays the Bluetooth status of the XP310w system. LINE OUT - Line level 1/4 output jack to connect the XP310w to the input of another XP310w to create an expanded speaker system. The LINE OUT signal is before the MASTER VOLUME and EQ Controls. VOICEOVER ON/OFF Switch - Turns the VOICEOVER ducking on or off. LOW BATTERY Indicator - This LED lights when the XP310w battery is low. When the light is on, it is recommended to plug the XP310w into and AC outlet. CHARGING Indicator - When the XP310w is plugged in and the POWER switch is set to the RECHARGE position, the CHARGING indicator will illuminate RED while it is charging. Once charging is complete the indicator will turn off. POWER Indicator - Lights green when the power switch is in the ON position. Antennas - The antenna mountings allow full rotation for optimum placement. When using the Concert 88a wireless system, both antennas should be placed in a vertical position. XP310w Portable PA System he XP310w Rear Panel Callouts 1. Power / Recharge Switch - This three position switch is used to turn the XP310w ON, OFF or place the system into RECHARGE mode to charge the internal battery. AC INPUT - Connect the supplied power cord here. CR88a Receiver - Included frequency agile wireless UHF receiver. CR88a receiver cover/slot - Extra slot to add an additional CR88a wireless receiver. Microphone storage - Two slots to store wireless handheld transmitters. Telescopic handle - Press button and pull up to extend the telescopic handle. Speaker stand receptacle - 1 3/8 locking stand mount for placing the XP310w on a standard speaker stand. CR88a Receiver Display a b wo N Channel - Displays the selected channel number. Frequency - Indicates the operating frequency of the selected channel. Audio Meter - Displays the strength of the incoming audio signal. RF Signal Meter - Displays the strength of the incoming radio signal. Mute Indicator - This icon indicates that the transmitter is muted and audio will not pass through the receiver. Transmitter Battery Level - Indicates the battery level of the transmitter. Using the CR88a Receiver Q Selecting a channel 1. 2. Short press the UP (1) & DOWN (2) buttons to step through the available channels. Press and hold the UP (1) button for 3 seconds to enter IR Set mode to send the selected channel to the transmitter. Press and hold the UP (1) button for more than 6 seconds to rapidly cycle through the channels. Once the button is released, the receiver will enter IR Set mode to send the selected channel to the transmitter. Press and hold the DOWN (2) button for 6 seconds to enter scan mode. The CR88a will scan through the operating channels and find the optimal channel for performance. Once the scan is complete, the receiver will enter IR Set mode to send the selected channel to the transmitter. XP310w Portable PA System Using the CR88a Receiver IR Set 5. Press and hold the UP (1) button for 3 seconds to enter IR Set mode to send the selected channel to the transmitter. 6. Position the transmitter about 6"-12
(15-30 cm) from the front of the CR88a receiver display with the transmitters IR window (located in the battery compartment facing the receiver. 7. When the transmission of the operating channel is complete, the CR&&a will receive RF signal and the RF Signal Meter will light indicating that it is receiving wireless signal from the transmitter. Setting the receiver volume 8. Short press the SET (3) button to enter the receiver volume adjustment mode. 9. Press the UP (1) button to increase the receiver output level. 10. Press the DOWN (2) button to decrease the receiver output level. Adjusting the squelch Squelch is a function of the receiver that passes audio when the desired radio signal is above the squelch threshold and mutes audio when the radio signal is below the threshold. The higher the squelch setting, the stronger the incoming signal will have to be in order for you to hear it. To set your squelch level, place the wireless transmitter at the furthest distance you expect to use it and adjust the squelch level until it mutes the signal. Then adjust the squelch level back up until the wireless transmitter signal is heard. The squelch level should be set just above the background radio signal noise. If the squelch setting is set too low, you will hear static noise pass through the receiver when the transmitter is turned off or out of range. 11. Short press the SET (3) button two times to enter the squelch adjustment mode. 12. Press the UP (1) button to increase the squelch threshold level. 13. Press the DOWN (2) button to decrease the squelch threshold level. 10 CH88 Handheld Transmitter Callouts 1. Status Indicator - This LED displays the operation mode:
GREEN Normal Operation RED Mute Flashing GREEN | Low Battery Power/Mute Switch - Press and hold to turn the unit on or off. Press and release to mute or unmute the transmitter. Battery Cover - Unscrew the battery cover and slide down to open the CH88. battery compartment. Battery Holder - Open the battery holder by pressing the tab and lifting the cover. Insert two standard AA (LR6) batteries here, being sure to observe the plus and minus polarity markings shown. Although rechargeable Ni-Cad batteries can be used, they do not supply adequate current for more than four hours. WARNING: Do not insert the batteries backwards; doing so can cause severe damage to the CH&8 and will void your warranty. Input GAIN Control - This control adjusts the transmitter input sensitivity. For optimal performance, using the included screwdriver, set the input GAIN control to where you see the all of the CR&88a AF indicators light under high levels, then turn down the control until the last indicator lights only during audio peaks. IR Lens - This window is used to capture the infrared signal sent from the CR88a during the IR SET to channelize the transmitter. The battery cover must be open and the IR Lens facing towards the receiver to load the selected channel. Screwdriver - Designed for use in adjusting the CH88 input GAIN control. XP310w Portable PA System 5 11 Quick Start te Set the XP310w power switch to the OFF position, and fully turn all of the LEVEL controls counterclockwise to 0. If an outlet is available, connect the included power cord to the AC input of the speaker, and plug it into an electrical outlet. Set the XP310w power switch to the ON position. Connect your audio sources. Turn the MASTER VOLUME control up and set the input levels, following the steps below. Making Connections Channel 1 (Microphone / Line Input) 1. Connect a microphone using a standard XLR cable or line level equipment using a 1/4 instrument cable. If connecting a microphone, set the LINE / MIC switch to the down (MIC) position. If connecting a line level device, set the LINE / MIC switch to the up (LINE) position. While speaking into the microphone or playing music from a line level audio source, slowly raise the channel CH1 VOLUME control until you have reached the desired level. NOTE: If not using the Channel 1 input, turn the VOLUME control all the way down to keep out any unwanted noise. Channel 2 (Aux Input) 4. 12 Connect a line level device using 1/8 instrument cable. While playing music from a line level audio source, slowly raise the channel CH2 VOLUME control until you have reached the desired level. Quick Start Bluetooth 1. 2. Turn the BLUETOOTH VOLUME control down counterclockwise to 0. With the XP310w and your Bluetooth device powered on; press the PAIR button on the rear panel of the XP310w to make the speaker discoverable. The Bluetooth indicator will slowly flash blue. In the settings of your Bluetooth device, set it to discover available devices. From the Bluetooth device list, select the Samson BLUETOOTH device. If your device asks for a passkey, enter digits OOOO (four zeros) and press OK. Some devices may also ask you to accept the connection. The XP310w speaker indicates that pairing is complete when the indicator turns steady blue. You can now stream audio from your device to the XP310w speakers. With the volume control on your Bluetooth device turned up, play some music, and slowly raise the XP310w BLUETOOTH VOLUME control until you have reached the desired level. Using the Voiceover Switch The XP310w Voiceover ducker is a sophisticated music and paging system where the background music will automatically lower when an announcement is made. The ducker can operate with sound coming from any of the wired or wireless microphone inputs. When the VOICEOVER switch is pressed in, when ever signal is present at the Channel 1 microphone input, Concert 88a wireless inputs or XPD wireless input, the Channel 2 line level input and Bluetooth audio will automatically be lowered. Once there is no input present on microphone and wireless microphone inputs, the line level input and Bluetooth audio will return to their normal levels. XP310w Portable PA System 13 Connecting Samson XPD Wireless The following steps detail connecting a Samson XPD2 USB digital wireless system (sold separately) to your XP310w. 1. Plug the RXD2 USB receiver into one of the USB jacks on rear panel of the XP310w directly (figure 1) or using the included USB extension cable (figure 2). 2. Place a fresh set of AA (LR6) batteries in the transmitter battery holder, taking care to observe the polarity markings. 3. Turn the Channel 3 Wireless Volume knob completely counterclockwise, then turn the power of the XP310w to the ON position. 4. Turn on the power to the HXD1 handheld or PXD1 beltpack transmitter by pressing and holding Power switch; the indicator LED will light amber. 5. If the transmitter and receiver have not been previously paired, press and hold the button on the RXD2 receiver for >5 seconds, until it begins to flash. Press and continue to hold the Power button on the transmitter until the LED indicators on both units light steady, indicating that the receiver and transmitter are paired and ready for operation. 6. Speak or sing into the microphone at a normal performance level and raise the Channel 3 Wireless Volume knob on the XP310w until the desired level is reached. 7. If you hear distortion turn down the Channel 3 Wireless Volume on the XP310w. If distortion is still audible, use the supplied screwdriver to turn the Gain control in the HXD1 transmitter slowly counterclockwise until the distortion disappears. Conversely, if you hear a weak, noisy signal at the desired volume level and with the Wireless level control of the XP310w is set to maximum, use the screwdriver to turn the Gain control in the HXD1 transmitter slowly clockwise until the signal reaches an acceptable level. Figure 2 14 SAMSON Using the LINE OUT Jack The XP310w LINE OUT jack allows you to connect the XP310w with any powered speaker to expand your system or link two XP310w systems together to daisy chain the speakers. Using a standard shielded 1/4 instrument cable, connect the LINE OUT on the XP310w to a line level input of a second powered speaker. The XP310w will send a mix of all inputs, including Bluetooth audio. Each channel VOLUME will control corresponding output level to the LINE OUT jack. Using a Speaker Stand The XP310w includes a 1 3/8 (85mm) pole mount receptacle on the bottom of the cabinet. This fits a standard 1-3/8 (35mm) speaker stand. For maximum coverage when using a speaker stand, the speaker should be raised above the heads of the listening audience. Take care when placing the speaker on a stand, to ensure that it is on a level, steady surface and will not tip over. Use a stand designed to support a speaker with a minimum weight of 30lb. XP310w Portable PA System 15 Charging the Battery The XP310w has an internal, rechargeable battery capable of up to 12 hours of continuous audio on a full charge. Even though the system may have some charge when first taken out of the box, it is recommended to fully charge your XP310w before first using the system. To charge the battery:
1. Connect the XP310w to an AC power outlet using the included power cable. 2. Set the power switch to the RECHARGE position. 3. While charging the CHARGING indicator will light red. 4. Keep the system plugged in until the CHARGING indicator changes to green, indicating the battery is fully charged. If you find that the operation time of the XP310w becomes noticeably decreased, even after fully charging, the battery should be replaced. Contact Samson customer service or your local distributor for a replacement battery. RECHARGE A warning that batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire or the like. CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. Attention should be drawn to the environmental aspects of battery disposal 16 SAMSON Installing the CR88a Receiver The XP310w comes with one CR88a receiver installed. You can add an additional CR&8a receiver to the system. Follow these steps to install the receiver. 1. Turn the XP310w POWER off and leave the AC power cable disconnected until the installation process is completed. 2. Press the button with the arrow under the blank receiver panel until the panel pops out. 3. Remove the blank panel by sliding it out of the XP310w. 4. Align the CR88a module with the open slot and slide the module in until it is fully seated in the XP310w. Note: When using multiple systems, each system must be set to a different operating channel. XP310w Portable PA System 17 Specifications Output Power Speakers Frequency Response Mic/Line Input Aux Input Wireless Input Outputs Tone Control Dynamics Control Bluetooth Working Frequency RF Power Battery Life Battery Charging Power Supply Construction Grille Mounting Wireless Receiver Wireless Sensitivity Wireless Image Rejection Wireless Working Range Operating Temperature Dimensions (LxDxH) Weight CH88 Handheld Transmitter Microphone Element Input Gain Range RF Power Power Requirements Battery Life Dimensions (Hx@) Weight 18 300 watts Peak 10 woofer + 1 tweeter 50Hz-18kHz (-3dB) XLR-1/4" combo 1/8 Aux USB wireless 14 Line Master Bass & Treble EQ Reverb, Voiceover (ducker) Bluetooth 4.0, A2DP 2. 402GHz~2.480GHz
<lomw Up to 12 hours by built-in Li-ion 4-6 hours AC:100-120V/220-240V, 50~60Hz Polypropylene Perforated steel grille, powder coated Integral 1 3/8 Pole Mount Receptacle Samson CR88a
-100 dBm / 30 dB sinad
>50 dB 100 (30m) line-of-sight
-10C ~ +40C 12.25" x 12.25" x 22 310mm x 310mm x 560mm 27.5 lb/ 12.5 kg Dynamic 28 dB 10 mW EIRP Two AA (LR6) alkaline batteries 8 hours 10.23" x 2.1"
260mm x 54mm 0.48 Ib/218 g Concert 88a Operating Bands and Frequency Ranges Frequency Range 470-494 MHz 542-566 MHz 794-806 MHz 806-810 MHz 863-865 MHz
* Not for use in the USA and Canada. European Frequency Operation Note: This equipment is intended for professional musical and similar applications, and may be capable of operating on some frequencies not authorized in your region. Please contact your national authority to obtain information on authorized frequencies for wireless microphone products in your region. Frequency Range EU Country Codes [Note kK? 470-494 MHz AT, BE, BG, CY, CZ, DK, EE, Fl, FR, DE, GR, HU, IS, IE, IT, L, LT, LU, MT, NL, NO, PL, PT, RO, SK, SI, ES, SE, CH, UK D** | 542-566 MHz For use in Israel IL** | 79. 06 MHz For use Japan G 863-865 MHz AT, BE, BG, CY, CZ, DK, EE, Fl, FR, DE, | License Free GR, HU, IS, IE, IT, LV, LT, LU, MT, NL, NO, PL, PT, RO, SK, SI, ES, SE, CH, UK
** Not for use in the EU.
* Licensing: Note that a ministerial license to operate this equipment may be required in certain areas. Consult your national authority for possible requirements. Licensing of Samson wireless microphone equipment is the users responsibility, and licensability depends on the users classification and application, and on the selected frequency. XP310w Portable PA System 19 Having Trouble with your XP310w?
We can help!
CONTACT OUR SUPPORT TEAM: support@samsontech.com Our experts can help you resolve any issues. Follow us:
@samson @samsontech @samson_technologies Samson Technologies Corp. 278-B Duffy Ave Hicksville, New York 11801 Phone: 1-800-3-SAMSON (1-800-372-6766) Fax: 631-784-2201 www.samsontech.com
1 2 | UM2 | Users Manual | 3.46 MiB | / May 08 2019 |
EXPEDITION MXP312w 300-WATT PORTABLE PA SYSTEM Owner's Manual SAMSON Copyright 2019 v1 Samson Technologies Corp. 278-B Duffy Ave Hicksville, New York 11801 www.samsontech.com The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Samson Technologies is under license. Other trademarks and trade names are those of their respective owners. Important Safety Information AVIS RISQUE DE CHOC ELECTRONIQUE -
NE PAS OUVRIR a risk of electric shock. This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of non-insulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance instructions in the literature accompanying the appliance. WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) AS THERE ARE NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. There is a separate collection system for used electronic products in accordance with legislation that requires proper treatment, recovery and recycling. Private household in the 28 member states of the EU, in Switzerland and Norway may return their used electronic products free of charge to designated collection facilities or to a retailer (if you purchase a similar new one). et If you want to dispose this product, do not mix it with general household waste. Ea For Countries not mentioned above, please contact your local authorities for a correct method of disposal. By doing so you will ensure that your disposed product undergoes the necessary treatment, recovery and recycling and thus prevent potential negative effects on the environment and human health. XP312w Portable PA System 3 Important Safety Information NOabhoan =
10. 11. 12. 13. 14, 15. 16. 17. 18. 19. 20. 21. 22. 23. Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. Do not defeat the safety purpose of the polarized or grounding type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. Protect the power cord from being walked on or pinched particularly at the plugs, convenience receptacles, and at the point where they exit from the apparatus. Only use attachments/accessories specified by the manufacturer. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. Unplug the apparatus during lightening storms or when unused for long periods of time. Refer all servicing to qualified personnel. Service is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. This appliance shall not be exposed to dripping or splashing water and that no object filled with liquid such as vases shall be placed on the apparatus. Caution-to prevent electrical shock, match wide blade plug wide slot fully insert. Please keep a good ventilation environment around the entire unit. To prevent injury, this apparatus must be securely attached to the stand in accordance with the installation instructions. WARNING: The battery (battery or batteries or battery pack) shall not be exposed to excessive heat such as sunshine, fire or the like. CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. WARNING: The mains plug/appliance coupler is used as disconnect device, the disconnect device shall remain readily operable. Battery disposal should be drawn to environmental aspects and should be according to local law requirements. No naked flame sources, such as lighted candles, should be placed on the apparatus. Important Safety Information FCC Notice 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
. Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. RF Warning Statement The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. This device complies with RSS-310 of Industry Canada. Operation is subject to the condition that this device does not cause harmful interference. Hereby, Samson Technologies Corp., declares that this Expedition XP312w is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. The declaration of conformity may be consulted at:
http:/Avww.samsontech.com/site_media/support/manuals/XP312w_DOC.pdf XP312w Portable PA System 5 Introduction Thank you for purchasing the XP312w battery-powered portable sound system, featuring wireless Bluetooth connectivity. Lightweight and compact, the XP312w features 300 watts of power weighing only 38 pounds, making it an excellent complement to any mobile speaker application. The internal rechargeable battery provides up to 12 hours of continuous use. The XP312w can also be AC powered (with the included power cord). The retractable handle and integrated wheels, make the XP312w easy to transport to any outing. The XP312w is a complete all-in-one solution providing the flexibility of a four-channel mixer (with inputs for microphones and line level devices), a line output for linking multiple speakers, and Voiceover priority ducking. For a completely untethered performance, the XP312w includes a Samson Concert 88a Handheld Wireless system and an additional slot to add a second Concert 88a system. There is also a USB jack for adding a Samson XPD Series wireless system. Whether you are looking for a sound system for use outdoors, in the classroom, for karaoke, for presentations, or performing live music, the XP312w provides high quality, portable audio in a small self-powered package. We recommend you keep the following records for reference, as well as a copy of your sales receipt. Serial number: _ Date of purchase:
If you have any questions or comments regarding the XP312w Portable PA System or any other products from Samson, do not hesitate to contact us at support@samsontech.com. With proper care and maintenance, your XP312w Portable PA System will operate trouble-
free for many years. Should your XP312w Portable PA System ever require servicing, a Return Authorization (RA) number must be obtained before shipping your unit to Samson. Without this number, the unit will not be accepted. Please visit www.samsontech.com/ra for an RA number prior to shipping your unit. Please retain the original packing materials and, if possible, return the unit in its original carton. If your XP312w Portable PA System was purchased outside of the United States, contact your local distributor. Features e =300 watt, all-in-one portable PA system that weighs 38Ib e 2-way speaker enclosure with 12 woofer and 1 tweeter e Internal rechargeable lithium ion battery for up to 12 hours of continuous use Bluetooth connectivity to connect wireless music sources e Includes Concert 88a Handheld Frequency-agile UHF Wireless System e 4-channel mixer with microphone and line level inputs e Master Bass and Treble EQ e = Variable reverb control for mic/wireless inputs e Voiceover control with priority ducking e Line output to daisy-chain multiple systems together e USB wireless port for use with Samson XPD Series USB Digital Wireless Systems e Retractable handle and smooth rolling wheels for easy transport e =. 1 3/8 speaker stand mount XP312w Mixer Callouts 1. MASTER VOLUME - Used to control the overall level of the speaker system. SAMSON 2. MASTER BASS - Controls the low- EATEDITION emt frequency tone of the entire system. a 3. MASTER TREBLE - Controls the high- ? , +
frequency tone of the entire system. 4. GH1 VOLUME - Controls the level of the Channel 1 Mic/Line input. 5. LINE / MIC Switch - Adjusts the gain of the CH1 input for a microphone or line level device. 6. CH1 Input - XLR-L4 input for connecting a microphone or a device with a line level signal. 7. GH2 VOLUME - Controls the level of the Channel 2 Aux input. AUX IN - Connect a line level device using an 1/8 audio cable. CH3 WIRELESS VOLUME - Controls the level of the Concert 88a wireless microphone receivers as well as the optional XPD USB wireless receiver. 10. XPD WIRELESS Input - Connect a Samson XPD USB digital wireless receiver to this input. The wireless receiver gets its power from the XP312w, so no additional power supply is needed. 11. REVERB - This knob is used to adjust the total amount of reverb added to Channel 1 and Channel 3 (wireless) input channels. 12. BLUETOOTH VOLUME - Controls the level of the Bluetooth input. 13. PAIR Button - Press this button to enable pairing mode in order to connect to a Bluetooth audio device. 14. Pairing Indicator - Displays the Bluetooth status of the XP312w system. 15. LINE OUT - Line level 1/4 output jack to connect the XP312w to the input of another XP312w to create an expanded speaker system. The LINE OUT signal is before the MASTER VOLUME and EQ Controls. 16. VOICEOVER ON/OFF Switch - Turns the VOICEOVER ducking on or off. 17. LOW BATTERY Indicator - This LED lights when the XP312w battery is low. When the light is on, it is recommended to plug the XP312w into and AC outlet. 18. CHARGING Indicator - When the XP312w is plugged in and the POWER switch is set to the RECHARGE position, the CHARGING indicator will illuminate RED while it is charging. Once charging is complete the indicator will turn off. 19. POWER Indicator - Lights green when the power switch is in the ON position. XP312w Portable PA System he XP312w Rear Panel Callouts 20. Antennas - The antenna mountings allow full rotation for optimum placement. When using the Concert 88a wireless system, both antennas should be placed in a vertical position. 21. CR88a Receiver - Included frequency agile wireless UHF receiver. 22. CR88a receiver cover/slot - Extra slot to add an additional CR88a ~
wireless receiver. 23. Retractable handle - Pull up to extend the handle for transport. -[:]o 24. Power / Recharge Switch - This three position switch is used to turn ees the XP312w ON, OFF or place the system into RECHARGE mode to charge the internal battery. @
25. AC INPUT - Connect the supplied power cord here. CR88a Receiver Display a b wo N Channel - Displays the selected channel number. Frequency - Indicates the operating frequency of the selected channel. Audio Meter - Displays the strength of the incoming audio signal. RF Signal Meter - Displays the strength of the incoming radio signal. Mute Indicator - This icon indicates that the transmitter is muted and audio will not pass through the receiver. Transmitter Battery Level - Indicates the battery level of the transmitter. Using the CR88a Receiver Q Selecting a channel 1. 2. Short press the UP (1) & DOWN (2) buttons to step through the available channels. Press and hold the UP (1) button for 3 seconds to enter IR Set mode to send the selected channel to the transmitter. Press and hold the UP (1) button for more than 6 seconds to rapidly cycle through the channels. Once the button is released, the receiver will enter IR Set mode to send the selected channel to the transmitter. Press and hold the DOWN (2) button for 6 seconds to enter scan mode. The CR88a will scan through the operating channels and find the optimal channel for performance. Once the scan is complete, the receiver will enter IR Set mode to send the selected channel to the transmitter. XP312w Portable PA System Using the CR88a Receiver IR Set 5. Press and hold the UP (1) button for 3 seconds to enter IR Set mode to send the selected channel to the transmitter. 6. Position the transmitter about 6"-12
(15-30 cm) from the front of the CR88a receiver display with the transmitters IR window (located in the battery compartment facing the receiver. 7. When the transmission of the operating channel is complete, the CR&&a will receive RF signal and the RF Signal Meter will light indicating that it is receiving wireless signal from the transmitter. Setting the receiver volume 8. Short press the SET (3) button to enter the receiver volume adjustment mode. 9. Press the UP (1) button to increase the receiver output level. 10. Press the DOWN (2) button to decrease the receiver output level. Adjusting the squelch Squelch is a function of the receiver that passes audio when the desired radio signal is above the squelch threshold and mutes audio when the radio signal is below the threshold. The higher the squelch setting, the stronger the incoming signal will have to be in order for you to hear it. To set your squelch level, place the wireless transmitter at the furthest distance you expect to use it and adjust the squelch level until it mutes the signal. Then adjust the squelch level back up until the wireless transmitter signal is heard. The squelch level should be set just above the background radio signal noise. If the squelch setting is set too low, you will hear static noise pass through the receiver when the transmitter is turned off or out of range. 11. Short press the SET (3) button two times to enter the squelch adjustment mode. 12. Press the UP (1) button to increase the squelch threshold level. 13. Press the DOWN (2) button to decrease the squelch threshold level. 10 CH88 Handheld Transmitter Callouts 1. Status Indicator - This LED displays the operation mode:
GREEN Normal Operation RED Mute Flashing GREEN | Low Battery Power/Mute Switch - Press and hold to turn the unit on or off. Press and release to mute or unmute the transmitter. Battery Cover - Unscrew the battery cover and slide down to open the CH88. battery compartment. Battery Holder - Open the battery holder by pressing the tab and lifting the cover. Insert two standard AA (LR6) batteries here, being sure to observe the plus and minus polarity markings shown. Although rechargeable Ni-Cad batteries can be used, they do not supply adequate current for more than four hours. WARNING: Do not insert the batteries backwards; doing so can cause severe damage to the CH&8 and will void your warranty. Input GAIN Control - This control adjusts the transmitter input sensitivity. For optimal performance, using the included screwdriver, set the input GAIN control to where you see the all of the CR&88a AF indicators light under high levels, then turn down the control until the last indicator lights only during audio peaks. IR Lens - This window is used to capture the infrared signal sent from the CR88a during the IR SET to channelize the transmitter. The battery cover must be open and the IR Lens facing towards the receiver to load the selected channel. Screwdriver - Designed for use in adjusting the CH88 input GAIN control. XP312w Portable PA System 5 11 Quick Start 1. Set the XP312w power switch to the OFF position, and fully turn all of the LEVEL controls counterclockwise to 0. If an outlet is available, connect the included power cord to the AC input of the speaker, and plug it into an electrical outlet. Set the XP312w power switch to the ON position. Connect your audio sources. Turn the MASTER VOLUME control up and set the input levels, following the steps below. Making Connections Channel 1 (Microphone / Line Input) 1. Connect a microphone using a standard XLR cable or line level equipment using a 1/4" instrument cable. If connecting a microphone, set the LINE / MIC switch to the down (MIC) position. If connecting a line level device, set the LINE / MIC switch to the up (LINE) position. While speaking into the microphone or playing music from a line level audio source, slowly raise the CH1 VOLUME control until you have reached the desired level. NOTE: If not using the Channel 1 input, turn the VOLUME control all the way down to keep out any unwanted noise. Channel 2 (Aux Input) 4. 12 Connect a line level device using 1/8 cable. While playing music from a line level audio source, slowly raise the CH2 VOLUME control until you have reached the desired level. Quick Start Bluetooth 1. Turn the BLUETOOTH VOLUME control down counterclockwise to 0. 2. With the XP312w and your Bluetooth device powered on; press the PAIR button on the rear panel of the XP312w to make the speaker discoverable. The Bluetooth indicator will slowly flash blue. 3. In the settings of your Bluetooth device, set it to discover available devices. 4. Fromthe Bluetooth device list, select the Samson BLUETOOTH device. 5. If your device asks for a passkey, enter digits 0000 (four zeros) and press OK. Some devices may also ask you to accept the connection. 6. The XP312w speaker indicates that pairing is complete when the indicator turns steady blue. You can now stream audio from your device to the XP312w speakers. 7. With the volume control on your Bluetooth device turned up, play some music, and slowly raise the XP312w BLUETOOTH VOLUME control until you have reached the desired level. Using the Voiceover Switch The XP312w Voiceover ducker is a sophisticated music and paging system where the background music will automatically lower when an announcement is made. The ducker can operate with sound coming from any of the wired or wireless microphone inputs. When the VOICEOVER switch is pressed in, when ever signal is present at the Channel 1 microphone input, Concert 88a wireless inputs or XPD wireless input, the Channel 2 line level input and Bluetooth audio will automatically be lowered. Once there is no input present on microphone and wireless microphone inputs, the line level input and Bluetooth audio will return to their normal levels. XP312w Portable PA System 13 Connecting Samson XPD Wireless The following steps detail connecting a Samson XPD2 USB digital wireless system (sold separately) to your XP312w. 1. Plug the RXD2 USB receiver into one of the USB jacks on rear panel of the XP312w directly (figure 1) or using the included USB extension cable (figure 2). 2. Place a fresh set of AA (LR6) batteries in the transmitter battery holder, taking care to observe the polarity markings. 3. Turn the Channel 3 Wireless Volume knob completely counterclockwise, then turn the power of the XP312w to the ON position. 4. Turn on the power to the HXD1 handheld or PXD1 beltpack transmitter by pressing and holding Power switch; the indicator LED will light amber. 5. If the transmitter and receiver have not been previously paired, press and hold the button on the RXD2 receiver for >5 seconds, until it begins to flash. Press and continue to hold the Power button on the transmitter until the LED indicators on both units light steady, indicating that the receiver and transmitter are paired and ready for operation. 6. Speak or sing into the microphone at a normal performance level and raise the Channel 3 Wireless Volume knob on the XP312w until the desired level is reached. 7. If you hear distortion turn down the Channel 3 Wireless Volume on the XP312w. If distortion is still audible, use the supplied screwdriver to turn the Gain control in the HXD1 transmitter slowly counterclockwise until the distortion disappears. Conversely, if you hear a weak, noisy signal at the desired volume level and with the Wireless level control of the XP312w is set to maximum, use the screwdriver to turn the Gain control in the HXD1 transmitter slowly clockwise until the signal reaches an acceptable level. Figure 2 14 SAMSON Using the LINE OUT Jack The XP312w LINE OUT jack allows you to connect the XP312w with any powered speaker to expand your system or link two XP312w systems together to daisy chain the speakers. Using a standard shielded 1/4 instrument cable, connect the LINE OUT on the XP312w to a line level input of a second powered speaker. The XP312w will send a mix of all inputs, including Bluetooth audio. Each channel VOLUME will control corresponding output level to the LINE OUT jack. qa S) a a
My Using a Speaker Stand The XP312w includes a 1 3/8 (35mm) pole mount receptacle on the bottom of the cabinet. This fits a standard 1-3/8 (85mm) speaker stand. For maximum coverage when using a speaker stand, the speaker should be raised above the heads of the listening audience. Take care when placing the speaker on a stand, to ensure that it is on a level, steady surface and will not tip over. Use a stand designed to support a speaker with a minimum weight of 40lb. XP312w Portable PA System 15 Charging the Battery The XP312w has an internal, rechargeable battery capable of up to 12 hours of continuous audio on a full charge. Even though the system may have some charge when first taken out of the box, it is recommended to fully charge your XP312w before first using the system. To charge the battery:
1. Connect the XP312w to an AC power outlet using the included power cable. 2. Set the power switch to the RECHARGE position. 3. While charging the CHARGING indicator will light red. 4. Keep the system plugged in until the CHARGING indicator changes to green, indicating the battery is fully charged. If you find that the operation time of the XP312w becomes noticeably decreased, even after fully charging, the battery should be replaced. Contact Samson customer service or your local distributor for a replacement battery. RECHARGE A warning that batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire or the like. CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. Attention should be drawn to the environmental aspects of battery disposal 16 Installing the CR88a Receiver The XP312w comes with one CR88a receiver installed. You can add an additional CR88a receiver to the system. Follow these steps to install the receiver. 1. Turn the XP312w POWER off and leave the AC power cable disconnected until the installation process is completed. 2. Press the button with the arrow under the blank receiver panel until the panel pops out. 3. Remove the blank panel by sliding it out of the XP312w. 4. Align the CR88a module with the open slot and slide the module in until it is fully seated in the XP312w. Note: When using multiple systems, each system must be set to a different operating channel. XP312w Portable PA System 17 Specifications Output Power Speakers Frequency Response Mic/Line Input Aux Input Wireless Input Outputs Tone Control Dynamics Control Bluetooth Working Frequency RF Power Battery Life Battery Charging Power Supply Construction Grille Mounting Wireless Receiver Wireless Sensitivity Wireless Image Rejection Wireless Working Range Operating Temperature Dimensions (LxDxH) Weight CH88 Handheld Transmitter Microphone Element Input Gain Range RF Power Power Requirements Battery Life Dimensions (Hx@) Weight 18 300 watts Peak 12 woofer + 1 tweeter 50Hz-18kHz (-3dB) XLR-1/4" combo 1/8 Aux USB wireless 14 Line Master Bass & Treble EQ Reverb, Voiceover (ducker) Bluetooth 4.0, A2DP 2. 402GHz~2.480GHz
<lomw Up to 12 hours by built-in Li-ion 4-6 hours AC:100-120V/220-240V, 50~60Hz Polypropylene Perforated steel grille, powder coated Integral 1 3/8 Pole Mount Receptacle Samson CR88a
-100 dBm / 30 dB sinad
>50 dB 100 (30m) line-of-sight
-10C ~ +40C 15.25 x 14.25" x 23.5"
390mm x 360mm x 600mm 38 Ib/ 17.2 kg Dynamic 28 dB 10 mW EIRP Two AA (LR6) alkaline batteries 8 hours 10.23" x 2.1"
260mm x 54mm 0.48 Ib/218 g Concert 88a Operating Bands and Frequency Ranges Frequency Range 470-494 MHz 542-566 MHz 794-806 MHz 806-810 MHz 863-865 MHz
* Not for use in the USA and Canada. European Frequency Operation Note: This equipment is intended for professional musical and similar applications, and may be capable of operating on some frequencies not authorized in your region. Please contact your national authority to obtain information on authorized frequencies for wireless microphone products in your region. Frequency Range EU Country Codes [Note kK? 470-494 MHz AT, BE, BG, CY, CZ, DK, EE, Fl, FR, DE, GR, HU, IS, IE, IT, L, LT, LU, MT, NL, NO, PL, PT, RO, SK, SI, ES, SE, CH, UK D** | 542-566 MHz For use in Israel IL** | 79. 06 MHz For use Japan G 863-865 MHz AT, BE, BG, CY, CZ, DK, EE, Fl, FR, DE, | License Free GR, HU, IS, IE, IT, LV, LT, LU, MT, NL, NO, PL, PT, RO, SK, SI, ES, SE, CH, UK
** Not for use in the EU.
* Licensing: Note that a ministerial license to operate this equipment may be required in certain areas. Consult your national authority for possible requirements. Licensing of Samson wireless microphone equipment is the users responsibility, and licensability depends on the users classification and application, and on the selected frequency. XP312w Portable PA System 19 Having Trouble with your XP312w?
We can help!
CONTACT OUR SUPPORT TEAM: support@samsontech.com Our experts can help you resolve any issues. Follow us:
@samson @samsontech @samson_technologies Samson Technologies Corp. 278-B Duffy Ave Hicksville, New York 11801 Phone: 1-800-3-SAMSON (1-800-372-6766) Fax: 631-784-2201 www.samsontech.com
1 2 | EXT PHO | External Photos | 542.24 KiB | / May 08 2019 |
External Photos M/N: XP312W External Photos M/N: XP312W External Photos M/N: XP312W External Photos M/N: XP310W External Photos M/N: XP310W External Photos M/N: XP310W
1 2 | INT PHO | Internal Photos | 1.20 MiB | May 08 2019 |
Internal Photos M/N: XP312W Internal Photos M/N: XP312W Internal Photos M/N: XP312W Internal Photos M/N: XP312W Internal Photos M/N: XP312W Bluetooth Antenna Internal Photos M/N: XP312W Internal Photos M/N: XP312W Internal Photos M/N: XP312W Internal Photos M/N: XP312W
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2019-08-05 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | Original Equipment |
2 | 2402 ~ 2480 | DTS - Digital Transmission System |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 2 | Effective |
2019-08-05
|
||||
1 2 | Applicant's complete, legal business name |
Sam Ash Music Corporation
|
||||
1 2 | FCC Registration Number (FRN) |
0009055401
|
||||
1 2 | Physical Address |
262 Duffy Avenue
|
||||
1 2 |
Hicksville, NY
|
|||||
1 2 |
United States
|
|||||
app s | TCB Information | |||||
1 2 | TCB Application Email Address |
d******@compliancetesting.com
|
||||
1 2 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
app s | FCC ID | |||||
1 2 | Grantee Code |
CCR
|
||||
1 2 | Equipment Product Code |
XP310W
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 2 | Name |
D****** A********
|
||||
1 2 | Telephone Number |
516 3********
|
||||
1 2 | Fax Number |
516 3********
|
||||
1 2 |
d******@samsontech.com
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 2 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 2 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 2 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 2 | Equipment Class | DSS - Part 15 Spread Spectrum Transmitter | ||||
1 2 | DTS - Digital Transmission System | |||||
1 2 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Portable PA System | ||||
1 2 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 2 | Modular Equipment Type | Does not apply | ||||
1 2 | Purpose / Application is for | Original Equipment | ||||
1 2 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | Yes | ||||
1 2 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 2 | Grant Comments | Output power listed is conducted | ||||
1 2 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 2 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 2 | Firm Name |
EST Technology Co., Ltd.
|
||||
1 2 | Name |
I******** H******
|
||||
1 2 | Telephone Number |
+86 0******** Extension:
|
||||
1 2 |
i******@gdest.cn
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | 2402.00000000 | 2480.00000000 | 0.0029400 | ||||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
2 | 1 | 15C | 2402.00000000 | 2480.00000000 | 0.0034000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC