SEC-BT Bluetooth v2.0 + EDR Class2 Module Databook SEC-BT Databook Confidential / Preliminary Documentation Revision 1.0 www.sec.co.kr Revision v1.0 JAN 2007 SEC-BT Bluetooth v2.0 + EDR Class2 Module Databook List of Contents 1 General 1.1 Overview 1.2 Features 1.3 Application 1.4 Pinout Diagram & Outline Size 1.5 Device Terminal Descriptions 1.6 Package Dimensions 2 Characteristics 2.1 2.2 Electrical Characteristics Radio Characteristics 3 Terminal Description 3.1 USB 4 Revision History www.sec.co.kr Revision v1.0 JAN 2007 SEC-BT Bluetooth v2.0 + EDR Class2 Module Databook 1. General 1.1 overview This specification covers Bluetooth module (class-2) which complies with Bluetooth specification version 2.0 + EDR and integrates RF & Baseband controller in small package. This Module has deployed CSRs BC04-ROM CSP EDR chipset. All detailed specification including pinouts and electrical specification may be changed without notice. EEPROM 16Kbit Balance Filter X-Tal 26MHz BC4 CSP USB VCC 3.3V www.sec.co.kr Revision v1.0 JAN 2007 SEC-BT Bluetooth v2.0 + EDR Class2 Module Databook 1.2 Features Fully Qualified Bluetooth v2.0 + EDR System Enhanced Data Rate (EDR) compliant with v2.0.e.2 of specification for both 2Mbps and 3Mbps modulation modes Full-speed Bluetooth Operation with Full Piconet Support Scatternet Support Ultra Low Power Consumption Excellent Compatibility with Cellular Telephones Support for 802.11 Co-existence RoHS Compliant Integrated transcoders for A-law, u-law and linear PCM Full-speed USB v2.0 interface supports OHCI and UHCI host interface Standard HCI (USB) support Integrated 4Mbit ROM & 48Kbyte RAM Integrated 26MHz Reference Clock (Option) Integrated 16Kbit EEPROM (Option) Competitive Size (14mm x 43mm) 1.3 Application Audio Dongle USB Dongle www.sec.co.kr Revision v1.0 JAN 2007 SEC-BT Bluetooth v2.0 + EDR Class2 Module Databook 1.4 Pinout Diagram & Outline Size www.sec.co.kr Revision v1.0 JAN 2007 SEC-BT Bluetooth v2.0 + EDR Class2 Module Databook 1.5 Device Terminal Functions PIN Name PIN No. Description VCC USB +
USB -
GND 1 2 3 4 Main supply input voltage. Regulated DC Source recommended USB + with selectable internal 1.5k pull-up resistor USB -
Ground 1.6 Module Dimension www.sec.co.kr Revision v1.0 JAN 2007 SEC-BT Bluetooth v2.0 + EDR Class2 Module Databook Unit V V 2. Characteristics 2.1 Electrical Characteristics Absolute Maximum Ratings Rating Operating Temperature Range Supply Voltage : VCC Supply Voltage : VDD_CORE Minimum Typical Maximum
-20
-0.3 1.7 3.3 60
+0.3 1.9 www.sec.co.kr Revision v1.0 JAN 2007 SEC-BT Bluetooth v2.0 + EDR Class2 Module Databook 2.2 RF Characteristics Transmitter Specification Output Transmit Power Transmit Power Density Transmit Power Control Frequency Range 20dB Bandwidth Adjacent Channel Power Modulation Characteristics Initial Carrier Frequency Tolerance Carrier Frequency Drift Receiver Specification Sensitivity - Single-Slot Packet Sensitivity - Multi-Slot Packet C/I Performance Blocking Performance Intermodulation Performance Maximum Input Level Condition Minimum Typical Maximum
-6 2 2400 0 850 140 115
-20
-25
-40
-40 4 4 8 2483.5 1000
-20
-40
-40 175 80
-20 25 40 40 Minimum Typical Maximum
-70
-70
-10
-27
-27
-10
-39
-20
11 0 / 0
-30 / -20
-40 / -40 Normal Normal Normal Normal Normal 2MHz 3MHz 4MHz f1avg f2max f2avg/f1avg Normal DH1 DH3 DH5 Condition BER 0.1%
BER 0.1%
C/I co-channel C/I F=F0 +-1MHz C/I F=F0 +-2MHz C/I F=F0 +-3MHz 30MHz ~ 2GHz 2GHz ~ 2.4GHz 2.5GHz ~ 3GHz 3GHz ~ 12.75GHz n=5 Normal Unit dBm dBm dBm MHz KHz dBm KHz KHz KHz Unit dBm dBm dB dBm dBm dBm www.sec.co.kr Revision v1.0 JAN 2007 Description Antenna Frequency (MHz) Polarization Operating Temperature () Impedance () Antenna Type Weight(g) VSWR Efficiency (%) Peak Gain Max.(dBi) Average Gain (dBi) SEC-BT Bluetooth v2.0 + EDR Class2 Module Databook Value 2400~2484 Linear
-40~+85 50 SMD 0.12
< 3 : 1 80.13 4.21
-0.93 www.sec.co.kr Revision v1.0 JAN 2007 SEC-BT Bluetooth v2.0 + EDR Class2 Module Databook 3. Terminal Description 3.1 USB This Bluetooth module contains a full speed (12Mbit/s) USB interface that is capable of driving a USB cable directly. No external USB transceiver is required. The device operates as a USB peripheral, responding to requests from a master host controller such as a PC. Both the OHCI and the UHCI standards art supported. The set of USB endpoints implemented can behave as specified in the USB section of the Bluetooth specification v2.0 + EDR or alternatively can appear as a set of endpoints appropriate to USB audio devices such as a set of USB speakers. USB is a master/slave oriented system (in common with other USB peripherals). This Module only supports USB slave operation. www.sec.co.kr Revision v1.0 JAN 2007 SEC-BT Bluetooth v2.0 + EDR Class2 Module Databook Issued by 4. Revision History Revision Rev 1.0 Date 2007-01-16 Change Descriptions Initial release www.sec.co.kr Revision v1.0 JAN 2007 FCC Statements SEC-BT Bluetooth v2.0 + EDR Class2 Module Databook This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. To comply with the FCC RF exposure compliance requirements, this device and its antenna must not be co-located or operated in conjunction with any other antenna or transmitter. The final device into which this transmitter module is installed must be labeled with the following statement: This device contains TX FCC ID: A3LBT. If this transmitter will be configured as a pc peripheral, it will be the OEMs responsibility to obtain authorization as such (either through Certification of Declaration of Conformity) prior to marketing of the device. www.sec.co.kr Revision v1.0 JAN 2007