all | frequencies |
|
|
exhibits | applications |
---|---|---|---|---|---|
manuals |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
Users Manual | Users Manual | 1.27 MiB | / December 02 2003 | |||
1 |
|
Users Manual per CRN 7159 | Users Manual | 75.89 KiB | / December 02 2003 | |||
1 | Attestation Statements | December 02 2003 | ||||||
1 | Attestation Statements | December 02 2003 | ||||||
1 | Cover Letter(s) | December 02 2003 | ||||||
1 | RF Exposure Info | / December 02 2003 | ||||||
1 | External Photos | December 02 2003 | ||||||
1 | ID Label/Location Info | December 02 2003 | ||||||
1 | Internal Photos | December 02 2003 | ||||||
1 | RF Exposure Info | / December 02 2003 | ||||||
1 | RF Exposure Info | / December 02 2003 | ||||||
1 | RF Exposure Info | / December 02 2003 | ||||||
1 | RF Exposure Info | December 02 2003 | ||||||
1 | RF Exposure Info | December 02 2003 | ||||||
1 | Test Report | / December 02 2003 | ||||||
1 | Test Report | / December 02 2003 | ||||||
1 | Test Setup Photos | / December 02 2003 |
1 | Users Manual | Users Manual | 1.27 MiB | / December 02 2003 |
* Some contents in this manual may differ from your phone depending on the software of the phone or your service provider. TDMA MOBILE TELEPHONE STH-N395 3 r d v e r s i o n
( 2 0 0 2 . 1 1 . 2 7 ) ELECTRONICS World Wide Web http://www.samsungmobile.com Printed in Korea Code No. : GH68-xxxxxA English. 11/2002. Rev. 1.0 Please, be sure to read this manual before using your phone. And keep the manual after reading it and use any time you have a question. FCC RF EXPOSURE INFORMATION Contents In August 1996 the Federal Communications Commission (FCC) of the United States with its action in Report and Order FCC 96-326 adopted an updated safety standard for human exposure to radio frequency electromagnetic energy emitted by FCC regulated transmitters. Those guidelines are consistent with the safety standard previously set by both U.S. and international standards bodies. The design of this phone complies with the FCC guidelines and these international standards. Use only the supplied or an approved antenna. Unauthorized antennas, modifications, or attachments could impair call quality, damage the phone, or result in violation of FCC regulations. Do not use the phone with a damaged antenna. If a damaged antenna comes into contact with the skin, a minor burn may result. Please contact your local dealer for replacement antenna. Body-worn Operation This device was tested for typical body-worn operations with the back of the phone kept 1.5 cm. from the body. To maintain compliance with FCC RF exposure requirements, use only belt-
clips, holsters or similar accessories that maintain a 1.5 cm. separation distance between the user's body and the back of the phone. The use of belt-clips, holsters and similar accessories should not contain metallic components in its assembly. The use of accessories that do not satisfy these requirements may not comply with FCC RF exposure requirements, and should be avoided. Contact your local dealer for optional accessory items. Vehicle Mounted External Antenna (optional, if available.) A minimum separation distance of 7.9 inches (20cm) must be maintained Between a person and the vehicle mounted external antenna to satisfy FCC RF exposure requirements. For more information about RF exposure, please visit the FCC website at www.fcc.gov Unpacking. 7 Your Phone Phone Layout. 8 Display. 10 Service Light . 12 Getting Started Installing the Battery . 13 Charging the Battery . 15 Switching the Phone On or Off . 17 Locking Your Phone . 18 Call Functions Making a Call. 19 Making a Call from the Phonebook . 20 Redialing the Last Number . 20 Adjusting the Volume . 21 Answering a Call . 22 Viewing Missed Calls . 23
. 25 Quickly Switching to Silent Mode Selecting Functions and Options Using the Soft Keys . 26 Selecting Functions and Options . 27 Example: Setting the Display Language . 28 Phonebook Storing a Phone Number with a Name . 30 Searching for a Number in the Phonebook . 31 Entry Options . 33 Speed Dialing by Memory Location . 35 Phonebook Options . 36 1 Entering Text Changing the Text Input Mode . 40 Using the T9 Mode . 41 Using the Upper/Lower-Case Character Mode . 42 Using the Number Mode . 43 Options During a Call Muting/Sending Key Tones. 44 Searching for a Number in the Phonebook . 45 Using the SMS Service . 46 Making a Calling card call . 46 Making the Voice Call Private . 47 Putting a Call on Hold. 47 Answering a Second Call . 48 Making a Conference Call . 49 Using the Menus Accessing a Menu Function by scrolling . 50 Accessing a Menu Function by Using its Shortcut . 51 List of Menu Functions . 52 Call Records Missed Calls (Menu 1.1) . 57 Incoming Calls (Menu 1.2) . 57 Outgoing Calls (Menu 1.3). 58 Call Time (Menu 1.4). 58 Messages Voice Mail (Menu 2.1). 59 Read Messages (Menu 2.2) . 60 Write Messages (Menu 2.3) . 62 Preset Message List (Menu 2.4) . 63 Setup (Menu 2.5) . 64 Message Alert Setting (Menu 2.6). 65 Picture Message (Menu 2.7). 66 Receiving Pictures, Ring Tones, or Caller Line Icons . 67 Tones Ring Tone (Menu 3.1) . 71 Ring Volume (Menu 3.2) . 71 Alert Type (Menu 3.3) . 72 Keypad Sound Type (Menu 3.4). 72 Keypad Tone Length (Menu 3.5) . 73 Error Tone (Menu 3.6). 73 Minute Minder (Menu 3.7) . 74 Connect Tone (Menu 3.8) . 74
. 75 Melody Composer (Menu 3.9) Settings Greeting Message (Menu 4.1). 77 LCD Control (Menu 4.2). 77 Service Light (Menu 4.3). 80 Auto Redial (Menu 4.4) . 80 Answer Mode (Menu 4.5) . 81 External Keys (Menu 4.6) . 81 Short Cut Key (Menu 4.7) . 82 Active Flip (Menu 4.8). 83 Service LED Color (Menu 4.9) . 83 Language (Menu 4.10) . 84 Calling Card (Menu 4.11). 84 Reset Setting (Menu 4.12). 87 Organizer Calendar (Menu 5.1). 88 To do List (Menu 5.2) . 90 Time & Date (Menu 5.3) . 92 Alarm (Menu 5.4) . 94 Calculator (Menu 5.5) . 95 Security Change Lock code (Menu 6.1) . 96 Change Security code (Menu 6.2). 96 Call Restriction (Menu 6.3) . 97 SOS Call List (Menu 6.4) . 98 2 3 Network Services Call Diverting (Menu 7.1) . 99 Call Waiting (Menu 7.2) . 100 Network Selection (Menu 7.3) . 101 Voice Privacy (Menu 7.4) . 102 NAM Selection (Menu 7.5) . 102 Set Service Code (Menu 7.6) . 103 Public System Selection (Menu 7.7) . 104 Games . 105 Voice Functions Voice Dial (Menu 10.1) . 107 Voice Command (Menu 10.2) . 110 Voice Memo (Menu 10.3) . 110 Solving Problems . 112 Health and Safety Information . 114 Glossary. 129 Index . 132 Quick Reference Card . 137 Important Safety Precautions Read these guidelines before using your wireless phone. Failure to comply with them may be dangerous or illegal. For more detailed safety information, see Health and Safety Information on page 114. Road Safety at All Times Do not use a hand-held phone while driving; park the vehicle first. Switching Off When Refueling Do not use the phone at a refueling point (service station) or near fuels or chemicals. Switching Off in Aircraft Wireless phones can cause interference. Using them in aircraft is both illegal and dangerous. Switching Off in Hospitals Switch off your phone near medical equipment. Follow any regulations or rules in force. Interference All wireless phones may be subject to interference, which could affect their performance. Special Regulations Meet any special regulations in force in any area and always switch off your phone whenever it is forbidden to use it, or when it may cause interference or danger (in a hospital for example). 4 5 Radio frequency exposure information In August 1996, the Federal Communications Commission (FCC) of the U.S. adopted an updated safety standard for human exposure to radio frequency electromagnetic energy emitted by FCC regulated transmitters. The design of this phone complies with the FCC guidelines and these international standards. Sensible Use Use only in the normal position (held to the ear). Avoid unnecessary contact with the antenna when the phone is switched on. Accessories and Batteries Use only Samsung-approved accessories and batteries. Qualified service Only qualified service personnel may install or repair your phone. Unpacking Your package contains the following items. Handset Travel Charger Battery Hand Strap Users Manual In addition, you can obtain the following accessories for your phone from your local Samsung dealer:
Desktop charger Hands-free kit Standard/Extended battery Cigarette lighter adapter Ear-microphone Leather case 6 7 Your Phone Phone Layout The following illustrations show the main elements of your phone.
(Soft keys) Antenna Earpiece Display Navigation keys Soft key (right) Power on/off key Alphanumeric keys Special function keys Service light Ear-microphone jock Volume keys Soft key (left) Dial/menu confirmation key Cancel/
correction key Microphone Flip cover 8 YYoouurr PPhhoonnee Key Description Perform the functions indicated by the text above them (on the bottom line of the display). In the menu mode, scroll through the menu options and the phonebook memory. When pressed in the standby mode, enter your favorite menu options directly. For more information on shortcuts, see page 86. Deletes characters from the display. In the menu mode, returns to the previous menu level. When held down for more than two seconds in the standby mode, quickly enters or exits the silent mode. Makes or answers a call. In the standby mode, recalls the last number dialed. Ends a call. Also switches the phone on and off when pressed and held. In the menu mode, cancels your input and returns to the standby mode. When held down in the standby mode, allows you to access your voice mail box.
Enter numbers, letters and some special characters. 9 YYoouurr PPhhoonnee YYoouurr PPhhoonnee Key Description (continued...) Enter special dial characters. Also use these keys for various purposes in different functions.
(on the side of the phone) During a call, adjust the earpiece volume. In the standby mode with the folder open, adjust the key volume. In the menu mode, scroll through the menu options and the phonebook memory. Display Display Layout The display comprises three areas. Icons Text and graphic area Soft key indications MMeennuu NNaammeess Area Description First line Displays various icons (see page 11). Middle lines Last line 10 Display messages, instructions and any information that you enter; for example, the number to be dialed. Shows the functions currently assigned to the two soft keys. Icons Icon Description Shows the received signal strength. The greater the number of bars, the better the signal. Appears when a call is in progress. Appears when you are outside the service area. Appears when a new text message has been received. Appears when the silent mode is active and when the Alert Type menu option
(Menu 3.3) is set to Vibration or Vibra+Melody. Appears when you set an alarm. Shows the level of your battery. The more bars you see, the more power you have left. Appears when you are out of your home area and have registered onto a different network; for example, when travelling in other countries. Appears when the phone is in the digital mode. Appears when a new voice mail message has been received. Appears when you activate the mute mode. 11 Getting Started Installing the Battery To Install the Battery 1. Insert the contact end on the bottom of the battery into the slots at the bottom of the phone. 2. Press the battery down until it clicks into place. YYoouurr PPhhoonnee Backlight The backlight illuminates the display. When you press any key, the backlight illuminates. It turns off if no key is pressed within a given period of time, depending on the Backlight option set in the Settings menu. To specify the length of time for which the backlight is active, set the Backlight menu option (Menu 4.2.4); see page 79 for further details. Service Light The service light is at the top left-hand corner of the phone. It flashes to indicate phone status: When the phone is ready for use, it flashes in green. When a call or message comes in, and you are recording a voice memo, it flashes in red. To activate or deactivate use of the service light, set the Service Light menu (Menu 4.3); see page 80 for further details. Service light 12 13 GGeettttiinngg SSttaarrtteedd GGeettttiinngg SSttaarrtteedd To Remove the Battery 1. If necessary, switch off the phone by holding down the begins to play. key until the power off graphic 2. Remove the battery. To do so:
Push the catch above the battery towards the top of the phone and lift the battery away. Charging the Battery Your phone is powered by a rechargeable Li-Ion battery. A travel adapter comes with your phone. Use only approved batteries and chargers. Ask your local Samsung dealer for further details. You can use the phone while the battery is charging. Note: You must fully charge the battery before using your phone for the first time. A discharged battery is fully recharged in approximately 200 minutes. 1. With the battery in position on the phone, plug the connector of the travel adapter into the slot at the bottom of the phone. 2. Plug the adapter into a standard AC wall outlet. 14 15 GGeettttiinngg SSttaarrtteedd GGeettttiinngg SSttaarrtteedd 3. When charging is finished and the lamp on the charge turns green, unplug the adapter from the AC wall outlet and then from the phone. Note: Do not remove the battery from the phone without unplugging the adapter while it is charging. If you do this, the phone may be damaged. Low Battery Indicator When the battery is weak and only a few minutes of talk time remain, you will hear a warning tone and the following message will be repeated at regular intervals on the display, along with the empty battery icon:
****WWaarrnniinngg****
LLooww BBaatttteerryy When the battery becomes too weak for the phone to operate, it switches off automatically. 16 Switching the Phone On or Off 1. Open the flip cover. 2. Hold down the key for more than one second to switch the phone on. 3. The phone searches for your network and when it finds the network, the idle screen, illustrated below, displays. SSeerrvviiccee PPrroovviiddeerr 1122::5577PP SSaatt 1144 MMaarr MMeennuu NNaammeess Note: The display language is preset to English at the factory. To change the language, use the Language menu option (Menu 4.10); for further details, refer to page 84. 4. When you wish to switch the phone off, hold down the key for more than two seconds. 17 GGeettttiinngg SSttaarrtteedd Locking Your Phone You can lock your phone to protect the phone against unauthorized use. When the phone is locked, you cannot use the phone until you enter the lock code. To lock your phone:
Press and hold the key for more than two seconds in the standby mode. Phone Locked appears on the idle screen. SSeerrvviiccee PPrroovviiddeerr 1122::5577PP PPhhoonnee LLoocckkeedd UUnnlloocckk SSOOSS To unlock the phone:
Press the Unlock soft key and enter the lock code, and then press the OK soft key. Your phones lock code is preset to 0000 at the factory. For further details on the lock code, see page 95. Even when the phone is locked, you can place an SOS call to one of the emergency numbers stored in the SOS Call List (Menu 6.4). See page 98 for further details. To place an SOS call, press the SOS soft key, select an emergency number by pressing the key and press the Yes soft key. or Call Functions Making a Call When the idle screen is displayed, enter the area code and phone number and press the key. Note: If you have set the Auto Redial menu (Menu 4.4) to On and no one answers or the line is busy, the phone automatically retries to make the call up to ten times. If the network answers the call (by voice mail greeting, for example), the phone does not attempt to redial. See page 80. Correcting the Number To clear Press the last digit displayed the whole display the C key. and hold the C key for more than one second. Ending a Call When you want to end a call, briefly press the key or close the flip cover. 18 19 CCaallll FFuunnccttiioonnss CCaallll FFuunnccttiioonnss Making a Call from the Phonebook Adjusting the Volume You can store the phone numbers that you use regularly in the phones memory, which are collectively called the Phonebook. Simply select the required name to recall the associated number to dial. For further details about the Phonebook feature, refer to page 30. Redialing the Last Number The phone stores the last numbers you dialed. To redial any of these numbers:
1. If you have typed any characters on the display, press the mode. key to return to the standby 2. Press the key to display the last dialed number. 3. Press the key to scroll through the numbers until the required number displays. or 4. To dial the number displayed edit the number displayed 20 Press the key. the Edit soft key. Change the number as required, referring to Correcting the Number for details (see page 19). the Save soft key to save key the number or the to dial the number. During a call, if you want to adjust the voice volume, use the volume keys on the left side of the phone. Press the upper position to increase and the lower portion to decrease the volume. In the standby mode with the flip cover open, you can adjust the key tone volume using the keys. 21 CCaallll FFuunnccttiioonnss Answering a Call When someone calls you, the phone rings and displays the phone icon in the middle of the screen. nnnnnnnnnn
(( )) Callers name or number, if available. AAcccceepptt RReejjeecctt If you are subscribed to the Caller Line Identification service and the caller can be identified, the callers phone number or name, if stored in your Phonebook displays. If the caller cannot be identified, only the phone icon displays. 1. Open the flip cover. If it is already open, press the key. If the Answer Mode menu (Menu 4.5) is set to Open Answer, you can answer immediately the call by opening the flip cover. If the menu is set to Anykey Answer, you can press any key except the call. key to answer the If the menu is set to Send Key Answer, you must press the answer the call. For details on the Answer Mode menu, see page 81. key or the Accept soft key to 2. End the call by closing the flip cover or pressing the key. 22 CCaallll FFuunnccttiioonnss Note: You can answer a call while using the Phonebook or menu features. The current operation will be interrupted. Viewing Missed Calls If you are unable to answer a call for any reason, you can find out who is calling you, if the Caller Line Identification service is available, so that you can call the person back, if necessary. The number of missed calls is displayed on the idle screen immediately after the call is missed. To view the missed call immediately:
1. If the flip cover is closed, open the cover. 2. Press the View soft key. The number corresponding to the most recent missed call displays, if available. 3. To scroll through the missed calls Press the or key call the number displayed key. edit or delete a missed call number Options soft key
(For further details, see the next page). 23 CCaallll FFuunnccttiioonnss CCaallll FFuunnccttiioonnss Editing a Missed Call Number Note: If the callers number associated with the missed call is not available, the Edit option is not displayed. 1. Press the Options soft key. 2. If necessary, press the the Edit option. 3. Press the Select soft key. or key to highlight 4. Change the number as required. 5. To call the number store the number Press the key Save soft key and enter the name and location required (For further details, refer to page 30). Deleting a Missed Call 1. Press the Options soft key. 2. If necessary, press the the Delete option. 3. Press the Select soft key. or key to highlight You can press the Missed Call feature. key at any time to exit the Note: You can access the missed calls at any time by selecting the Missed Calls menu (Menu 1.1). For further details, see page 57. 24 Quickly Switching to Silent Mode You can quickly switch your phone to silent mode with a touch of a key. Press and hold the C key until the display. Your phone goes to silent mode immediately. icon and Silent Mode appears on the In silent mode, your phone switches the sound settings as follows:
Alert Type (Menu 3.3) SMS Tone (Menu 2.6) Error Tone (Menu 3.6) keypad tone Vibration vibration off off To exit the silent mode, press and hold the C key again until Exit Silent Mode appears. This feature is convenient when you are in a hurry to mute the phone sound, as when in a theater, for example. 25 Selecting Functions and Options Using the Soft keys Your phone offers a set of functions that allow you to customize it. These functions are arranged in menus and sub-menus, accessed via the two soft keys marked and . Each menu and sub-menu allows you to view and alter the settings of a particular function. The roles of the soft keys vary according to the current context; the label on the bottom line of the display just above each key indicates its current role. Example:
EEnntteerr NNaammee SS aa vv ee AA Press the left soft key to save the name entered. Press the right soft key to select the text input mode. SSeelleeccttiinngg FFuunnccttiioonnss aanndd OOppttiioonnss Selecting Functions and Options To view the various functions/options available and select the one required:
1. Press the appropriate soft key. 2. To select the:
Function displayed or Option highlighted view the next function or highlight the next option in a list move back to the function or option in a list move back up one level in the structure exit the structure without changing the settings Press the Select soft key. key or lower portion of the volume key key or upper portion of the volume key. soft key or C key. key. In some functions, you may be asked for a lock code or security code. Enter the required code and press the OK soft key. Note: When you access a list of options, your phone highlights the current option. If, however, there are only two options, such as On/Off or Enable/Disable, your phone highlights the option that is not currently active, so that you can select it directly. 26 27 SSeelleeccttiinngg FFuunnccttiioonnss aanndd OOppttiioonnss SSeelleeccttiinngg FFuunnccttiioonnss aanndd OOppttiioonnss Example: Setting the Display Language 1. When the idle screen displays, press the Menu soft key to enter menu mode. SSeerrvviiccee PPrroovviiddeerr 1100::3300PP FFrrii 1155 MMaayy MMeennuu NNaammeess 2. Scroll through the menus until you reach the Settings menu, by pressing the key. SSeettttiinnggss SSeelleecctt 44 3. To enter the Settings menu, press the Select soft key. GGrreeeettiinngg MMeessssaaggee SSeelleecctt 44..11 28 4. Scroll through the sub-menus until you reach the Language sub-menu, by pressing the key. LLaanngguuaaggee SSeelleecctt 44..1100 5. Press the Select soft key to choose Text Language option. TTeexxtt LLaanngguuaaggee Current language English SSeelleecctt 44..1100..11 6. To view the languages available, press the Select soft key. The current setting highlights. Current language 11 EEnngglliisshh 22 EEssppaaooll 33 PPoorrttuugguuss SSeelleecctt 44..1100..11..11 7. Find the appropriate language, by pressing the or key. 8. Press the Select soft key to confirm your selection. 9. Press the C or soft key twice to exit the menu structure. 29 Phonebook The Phonebook allows you to store frequently used phone numbers and the associated names in your phone to make it easy for you to make a call without having to remember or enter the phone number. Storing a Phone Number with a Name As soon as you start to enter a number, Save appears above the left soft key to allow you to store the number in your Phonebook. 1. Enter a phone number you want to store. Note: If you make a mistake while entering a number, correct it using the C key. For further details, refer to page 19. 2. To save the number, press the Save soft key. 3. Select a label by pressing the or key, and press the Select soft key. The available labels are: Home, Office, Mobile, Pager, Fax and E-mail. 4. Enter the desired name. For information on how to enter a name, see page 39. 5. When you are satisfied, press the OK soft key. The phone now prompts you to select a location in the phones memory for you to save the entry. PPhhoonneebbooookk 6. If necessary, enter your preferred location by pressing the number keys. 7. Press the OK soft key. The entry is saved and the display shows the name and number you just have saved. 8. To make a call to the displayed number, press the key. To send an SMS message to the displayed number, press the for further details about sending a message. SMS soft key. See page 62 To access the editing options, press the Options soft key. See page 33. 9. Press the key to return to the standby mode. Searching for a Number in the Phonebook 1. When the idle screen displays, press the Names soft key. You are asked to enter a name. 2. Enter the first letters of the name that you want to find and press the Search soft key. Note: You can also scroll through all of your Phonebook entries by pressing the Search soft key directly. The Phonebook entries are listed, starting with the first entry matching your input. 30 31 PPhhoonneebbooookk 3. To view the highlighted entry select a different entry look for a name starting with a different letter Press the View soft key. or key until the required entry highlights. key labeled with the required letter. 4. Press the or key until the desired number is displayed. 5. Once you have found the required number, press the key to dial the number. To send an SMS message to the selected number, press the about sending a message, see page 62. SMS soft key. For further details To edit the selected entry, press the Options soft key. For further details about the options, see page 33. PPhhoonneebbooookk Entry Options When viewing a number in your Phonebook, Options appears above the right soft key to allow you to access the options for editing the entry. Accessing the Options To access the various options:
1. While viewing a Phonebook entry, press the Options soft key. The first available option is highlighted. 2. To select the highlighted option highlight a different option Press the Select soft key. or key until the required option highlights. Add Number This option allows you to store up to seven numbers per entry by assigning them to different categories. Note that you cannot duplicate same categories for one entry. For example, you can only have one number labeled Mobile for the selected entry. New Name This option allows you to add a new phonebook entry See page 30 for further details about storing an entry. 32 33 PPhhoonneebbooookk PPhhoonneebbooookk Change Name This option allows you to change the name for the entry. Clear the old name pressing the C key and enter a new name. For information on entering a name, see page 39. Change Number This option allows you to change the number. Clear the old number by pressing the C key and enter a new number. Change Type This option allows you to change the label type of a stored number. Note that you cannot duplicate same categories for one entry. For example, you can only have one number labeled Mobile for the selected entry. Erase Number This option allows you to erase a stored number. If you saved two numbers under a name, only the currently selected number is erased. You are asked to confirm that you wish to erase the number by pressing the Yes soft key. Erase Name This option allows you to erase a name stored in the Phonebook so that all of the numbers under the name are erased. You are asked to confirm that you wish to erase the name by pressing the Yes soft key. Move This option allows you to move a Phonebook entry to another location. When prompted, enter the location number where you want to move, and press the OK soft key. Caller Group This option allows you to set the number as a member of the caller group. Select the desired caller group from the list. For more details about the Caller Group feature, see page 37. Set Key Number This option allows you to set the selected number as a speed dial number for the entry if it has more than one number. Press the Set soft key. Speed Dialing by Memory Location Once you have stored phone numbers in the phonebook memory, you can dial them easily whenever you want. To speed dial the desired number:
For the 1-digit memory location number (1 through 9), press and hold down the appropriate digit. For the 2 or more-digit memory location number (10 through 500), press first digit(s) briefly and hold down the last digit. 34 35 PPhhoonneebbooookk PPhhoonneebbooookk Note: If you enter the location number and press the key, your phone displays the details on the entry, such as name, number, location number and label. If you have stored more than one number for a name, scroll through the entry by pressing the key repeatedly. Phonebook Options When you press the Names soft key for searching, you can see Options above the right soft key. This key allows you to use the various options for your Phonebook. Accessing the Options To access the various Phonebook options:
1. In idle mode, press the Names soft key. 2. Press the Options soft key. The first available option highlights. 3. To select the highlighted option highlight a different option Press the Select soft key. or key until the required option highlights. New Entry This option allows you to create a new entry in the Phonebook. For details about storing a phone number, see page 30. Caller Group You can set the phone to ring in a specific way and display a preselected graphic icon when a particular person calls you. To do so, you must:
Define your caller groups Assign the numbers in the Phonebook to the appropriate group Defining a caller group Select the group to be defined and set the appropriate options. The following options are available. Call ring tone: allows you to select the ring tone to be used when you receive a voice phone call from a person in the group. SMS tone: allows you to select the ring tone to be used when you receive a text message from a person in the group. Graphic: allows you to select the graphic icon to be displayed when you receive a call from a person in the group. Group Name: allows you to assign a name to the group; for further details on how to enter characters, refer to page 39. Assigning numbers to a group 1. View the required number in Phonebook. 2. Press the Options soft key. 3. Select the Caller Group option. 36 37 PPhhoonneebbooookk 4. Select the required group. To remove a number from a group, select the No Group option. LED Color: allows you to select the color of the service light when you receive a call from a person in the group. Own Number This function is a memory aid, which you can use to check your own phone number if you need to do so. Memory Status You can check the used memory and free memory you have for Phonebook . The display shows how many entries are currently stored and can be saved in the future. Erase All This option allows you to erase all of the Phonebook entries. When a confirmation appears, press the Yes soft key to erase all of the Phonebook entries. To cancel erasing the entries, press the Cancel soft key. When prompted, enter the lock code. All of the entries in the Phonebook are erased. Entering Text When using your phone, you will often need to enter text. For example, when storing a name in the phonebook, creating your personal greeting or scheduling events in your calendar. You can enter alphanumeric characters by using your phone's keypad. Your phone has the following text input modes:
T9 mode This mode allows you to enter words with only one keystroke per letter. Each key on the keypad has more than one letter - when you press the 5 key once, J, K or L displays. The T9 mode automatically compares your keystrokes with an internal linguistic dictionary to determine the correct word, thus requiring far fewer keystrokes than the traditional upper/lower-case character modes. Upper/lower-case character modes These modes allow you to enter letters by pressing the key labeled with the required letter once, twice, three or four times until the letter displays. Number mode This mode allows you to enter numbers. 38 39 EEnntteerriinngg TTeexxtt EEnntteerriinngg TTeexxtt Changing the Text Input Mode Using the T9 Mode When you are in a field that allows characters to be entered, you will notice the text input mode indicator on the display. EEnntteerr NNaammee SSaavvee AA Text input mode indicator To select Press the soft key until The T9 predictive text input mode allows you to enter any character using single keystrokes. This text input mode is based on a built-in dictionary. 1. When you are in the T9 predictive text input mode, start entering a word by pressing keys 2 to 9. Press each key only once for one letter. Example: to enter HELLO in the T9 mode, press 4, 3, 5, 5 and 6. The word that you are typing appears on the display. It may change with each key that you press. 2. Enter the whole word before editing or deleting T9 mode displays. See page 41. the keystrokes. displays. See page 42. 3. If the word is correct, start entering the next word. Upper-case characters mode Lower-case characters mode displays. See page 42. Number mode displays. See page 43. 40 Otherwise, press the 0, key repeatedly to display alternative word choices for the keys that you have pressed. or Example: both OF and ME have the sequence 6, 3. The phone displays the most commonly used choice first. 4. Complete each word with a space by pressing the key. To type words not found in the T9 mode, change the text input mode to the upper/lower-case character input mode. 41 EEnntteerriinngg TTeexxtt EEnntteerriinngg TTeexxtt To enter full stops, hyphens or apostrophes, press the 1 key. The T9 mode applies grammar rules to ensure that the correct punctuation is used. Example: 1 is used twice to display two punctuation marks:
L E T S E A T . To shift the case in the T9 mode, use the key. You can move the cursor by using the key. To delete letters, press the C key. Press and hold the C key to clear the display. Using the Upper/Lower-Case Character Mode Use the 1 to 9 keys to enter your text. 1. Press the keys labeled with the required letter:
- Once for the first letter
- Twice for the second letter
- And so on 2. Select the other letters in the same way. Note: The cursor moves to the right when you press a different key. When entering the same letter twice or a different letter on the same key, press the 1 key to enter a space or just wait for a few seconds for the cursor to move right automatically, and then select the next letter. 42 Refer to the table below for more information about the characters available:
Key Characters in the Order Displayed Upper Case Lower Case You can move the cursor by using the key. To delete letters, press the C key. Press and hold the C key to clear the display. Using the Number Mode The Number mode enables you to enter numbers into a text messages. Press the keys corresponding to the desired digits, and manually switch back to the text input mode of choice. 43 Options During a Call Your phone provides a number of control functions that you can use during a call. Muting/Sending Key Tones You can turn the key tones which were generated each time you press a key off or on. To turn the key tone off:
1. During a call, press the Options soft key. 2. Press the or key to select the Mute Keys option. Now, the option is replaced with Send Keys. 3. Press the OK soft key. Your phone does not transmit the key tones. It allows you to press keys without hearing annoying key tones during a call. To turn the key tone on:
1. During a call, press the Options soft key. OOppttiioonnss DDuurriinngg aa CCaallll Searching for a Number in the Phonebook You can search for a number in the Phonebook during a call. 1. During a call, press the Options soft key. 2. Press the or key to select the Phonebook option. 3. Press the OK soft key. The Phonebook entries are listed. 4. Enter the name that you want to find. If you enter the first letters of the name, the Phonebook entries are listed, starting with the first entry matching your input. The entry also highlights. 5. To view the highlighted entry, press the View soft key. For a more detailed description of the Phonebook feature, refer to page 30. 2. Press the or key to select the Send Keys option. Now, the option is replaced with Mute Keys. 3. Press the OK soft key. Note: To communicate with answering machines or computerized telephony systems, the Send Keys option must be selected. 44 45 OOppttiioonnss DDuurriinngg aa CCaallll Using the SMS Service OOppttiioonnss DDuurriinngg aa CCaallll Making the Voice Call Private You can create and send a SMS message during a call. You can make the current call private so that nobody eavesdrops your call. 1. During a call, press the Options soft key. 1. During a call, press the Options soft key. key to select the SMS 2. Press the or key to select the Voice Privacy 2. Press the or Service option. 3. Press the OK soft key. option. 3. Press the Select soft key. 4. Write text for the message, and press the OK soft key. 4. Press the Deactivate. or key to select Activate or 5. Enter the desired phone number, and press the OK soft key to send the message. Select Activate to secure your call or Deactivate not to do. For further details about the SMS service, refer to page 59. Making a Calling Card Call When you make a call using the prepaid calling card, if you save the calling card information in the Calling Card menu (Menu 4.11), you can send automatically the code number required for the service without entering them manually each time you are prompted. For further details about making a calling card call, refer to page 84. 5. Press the Select soft key. Putting a Call on Hold You can make another call while you have a call in progress if your network supports this service. If you have an active call and a call on hold, you may alternate between the two calls, changing the one on hold to active and placing the other on hold. Note: The procedure to put a call on hold may vary depending on your network. For further details, contact your service provider. 46 47 OOppttiioonnss DDuurriinngg aa CCaallll OOppttiioonnss DDuurriinngg aa CCaallll To make a call while you have a call in progress:
1. During a call, key in the phone number that you wish to dial or look it up in the Phonebook. 2. Press the key to dial the second call. The first call is automatically put on hold. 3. To switch between the two calls, simply press the key. 4. To end the current call, press the key. Answering a Second Call You can answer an incoming call while you have a call in progress, if your network supports this service and you have set the Call Waiting menu (Menu 7.2) to Activate (see page 100). Your phone notifies you of an incoming call by a call waiting tone. To answer a call while you have a call in progress:
1. When you hear a call waiting tone, press the key to answer the incoming call. The first call is automatically put on hold. 2. To switch between the two calls, press the key. 3. To end the current call, press the key. Making a Conference Call You can conduct conference calls with two separate parties at the same time. A conference call is a network service. For more information, contact your service provider. Note: The procedure may vary depending on your network. Contact the service provider for details. 1. Call the first participant in the normal way. 2. Call the second participant in the normal way. The first call is automatically put on hold. 3. When the second person answer, press the key to merge the calls. 4. End the conference call by closing the flip cover or pressing the key. During a conference call, if one of the callers hangs up, you and the remaining caller stay connected. If you initiated the call and you hang up first, all of the three parties are disconnected. 48 49 Using the Menus The phone offers a range of functions that allows you to tailor the phone to your needs. These functions are arranged in menus and submenus. The menus and submenus can be accessed by scrolling or by using the shortcuts. Accessing a Menu Function by Scrolling 1. In the standby mode, press the Menu soft key to key to access the menu mode. Press the reach the desired main menu, e.g., Settings. Press the Select soft key to enter the Settings menu. or 2. If the menu contains any submenus, for example, Language, find one you want by pressing the or submenu. key. Press the Select soft key to enter the If the selected menu contains submenus, repeat this step. or 3. Press the key to find the setting of your choice. Press the Select soft key to confirm the chosen setting. Notes:
You can return to the previous menu level by pressing the C key. You can exit the menu without changing the menu settings by pressing the key. UUssiinngg tthhee MMeennuuss Accessing a Menu Function by Using its Shortcut The menu items (menu, submenus and setting options) are numbered and can be accessed quickly by using their shortcut numbers. The shortcut number is shown in the bottom right next to the on the display. soft key BBaacckklliigghhtt Short SSeelleecctt 44..22..44 Shortcut number Note: The numbers assigned to each menu function are indicated in the list on page 52. 1. In the standby mode, press the Menu soft key. 2. Within three seconds, enter the first digit of the shortcut number. Repeat this for each digit of the shortcut number. Example: Setting the Backlight option to Short Press the Menu soft key, and enter 4, 2, 4, 2. Menu for entering the menu, 4 for Settings, 2 for Lcd Control, 4 for Backlight, 2 for Short . 50 51 UUssiinngg tthhee MMeennuuss UUssiinngg tthhee MMeennuuss List of Menu Functions The following list shows the menu structure available and indicates the:
Number assigned to each option Page on which you can find a description of each Page 57 feature 1. Call Records 1.1 Missed Calls 1.2 Incoming Calls 1.3 Outgoing Calls 1.4 Call Time 1.4.1 Last Call Time 1.4.2 Total Call Time 1.4.3 Display Call Time 1.4.4 Reset Timers 2. Messages Page 59 2.1 Voice Mail 2.1.1 Connect to Voice Server 2.1.2 Voice Server Number 2.2 Read Messages 2.2.1 New Inbox 2.2.2 Old Inbox 2.2.3 Outbox 2.2.4 Delete All 2.3 Write Messages 2.4 Preset Message List 2.5 Setup 2.6 Message Alert Setting 2.7 Picture Messages 52 3. Tones Page 70 3.1 Ring Tone 3.2 Ring Volume 3.3 Alert Type 3.4 Keypad Sound Type 3.5 Keypad Tone Length 3.6 Error Tone 3.7 Minute Minder 3.8 Connect Tone 3.9 Melody Composer 4. Settings Page 76 4.1 Greeting Message 4.2 LCD Control 4.2.1 Screen Mode 4.2.2 Select Image 4.2.3 Slide Menu 4.2.4 Backlight 4.2.5 Contrast 4.3 Service Light 4.4 Auto Redial 4.5 Answer Mode 4.6 External Keys 4.7 Short Cut Key 4.7.1 Key Up 4.7.2 Key Down 4.8 Active Flip 4.9 Service LED Color 4.10 Language 4.10.1 Text Language 4.10.2 Voice Guiding Language 4.11 Calling Card 4.12 Reset Setting 53 Page 87 UUssiinngg tthhee MMeennuuss 5. Organizer 5.1 Calendar 5.2 To do List 5.3 Time & Date 5.3.1 Set Time 5.3.2 Set Date 5.3.3 World Time 5.3.4 Format 5.4 Alarm 5.5 Calculator 6. Security Page 95 6.1 Change Lock Code 6.2 Change Security Code 6.3 Call Restriction 6.3.1 Restrict All Outgoing call 6.3.2 Restrict All Incoming call 6.3.3 Restrict outgoing call 6.4 SOS Call List 7. Network Services UUssiinngg tthhee MMeennuuss Page 98
7.1 Call Diverting 7.1.1 Divert Always 7.1.2 Busy 7.1.3 No Reply 7.1.4 Unreachable 7.1.5 Cancel All 7.2 Call Waiting 7.3 Network Selection 7.4 Voice Privacy 7.5 NAM Selection 7.6 Set Service Code 7.6.1 Call Divertion 7.6.2 Call Waiting 7.7 Public System Selection
*1 available when you set the service code in the Set Service Code menu option (Menu 7.6). 8. Games Page 103 8.1 Casino 8.2 Roulette 8.3 Black Jack 8.4 Sniper 8.5 Snake 8.6 Mole 8.7 Othello 8.8 Fortress 8.9 Ice Cave 54 55 UUssiinngg tthhee MMeennuuss 9. WWW Services 9.1 Home 9.2 Favorite 9.3 http://
9.4 Wap Setting 9.5 Clear Cache See WAP Browser Guide For details on the WAP browser feature, refer to the WAP Browser guide supplied with your phone. 10. Voice Functions Page 105 10.1 Voice Dial 10.2 Voice Command 10.3 Voice Memo Call Records Via this menu, you can view the following phone calls:
Missed Incoming Outgoing The number and name, if available, display together with the date and time at which the call was made. Note: Your phone can keep up to ten numbers in each record. Missed Calls Menu 1.1 This option lets you view the last incoming calls you failed to answer. Pressing the Options soft key allows you to:
edit the number, if available, and dial it or save it in the Phonebook. delete the call from the list. Incoming Calls Menu 1.2 This option lets you view the last calls you received. Pressing the Options soft key allows you to:
edit the number, if available, and dial it or save it in the Phonebook. delete the call from the list. 56 57 CCaallll RReeccoorrddss Outgoing Calls Menu 1.3 This option lets you view the last calls you dialed. Pressing the Options soft key allows you to:
edit the number and save it in the Phonebook. delete the number from the list. Call Time Menu 1.4 This option lets you view the timers for calls you made and received. The following options are available:
Last Call Time: shows the duration of the last call. Total Call Time: shows the total duration of all calls made to or from your phone since the timer was lastly set to zero by using the Reset Timers option. Display Call Time: allows you to set the phone to display the call time when the call is made or received. Select Enable to display the call time and Disable not to display it. Reset Timers: allows you to reset the call timers;
you must first enter the phones security code (see page 95) and then press the OK soft key. Note: The actual time invoiced for calls by your service provider may vary, depending on the network features, rounding-off for billing purposes and so forth. Messages The SMS (Short Message Service) function is a network service that may not be supported by your network. You can send a message by a text, a fax and an e-mail messaging systems, provided that these services are supported by your network. When you receive new text messages, the icon appears on the top line of the display. If the message memory is full, an error message displays and you cannot receive any new messages. Use the Delete option in the Read Messages menu (Menu 2.2) to delete obsolete messages. Your phone has the message function to allow you to receive picture, ring tone or caller line icon messages from the Internet. For details about receiving the messages, see page 60. Voice Mail Menu 2.1 This menu allows you to access your voice mailbox, if your network supports this service. Note: Please contact your service provider for more information. Depending on the service provider, you may be charged for accessing the voice server. Connect to Voice Server: allows you to listen to your voice mails. Before using this feature, you must enter the voice server number obtained from your service provider (see menu option 2.1.2). 58 59 MMeessssaaggeess MMeessssaaggeess Note: You can connect to the voice mail server of the service provider quickly by pressing and holding down the 0 key in idle mode. Voice Server Number: allows you to change the voice mail server number. To enter the server number correct a digit save the entered number Press the corresponding numeric keys. C key. Save soft key. Read Messages Menu 2.2 Three message boxes are available:
New Inbox: used to store the messages that you have received but not read. Old Inbox: used to store the messages that you have received and read. Outbox: used to store the messages that you have already sent or will send. 1. Select the required box. The first message in the box displays with the following information:
Message number Message status: New, Old, Not Sent, Sent
(If you set the Delivery Ack menu to ON, the report is also shown; see page 64 for further details.) Date and time at which the message is received
(inbox only) 60 2. Press the or key to select the message you want to read. 3. To view a message, press the View soft key. The screen shows the:
senders phone number, if the message is sent, or recipients phone number. message text. To scroll through the message, press the key. Press the Options soft key to select the following options:
or Delete: allows you to delete obsolete messages. Text Reply: allows you to reply by sending a text message. Call Back: allows you to call the sender back. Cut Number: allows you to extract a number from the message text, so that you can dial the number or save it in the Phonebook. Send: allows you to send a message that you received or saved. You can:
send the message. save and send the message. save but not send the message. Edit and Send: allows you to edit a message for sending. Note: The available options may vary, depending on the message status (New/Old, Not Sent or Sent, for example). To delete all of the messages in the three message boxes, you can select Delete All (Menu 2.2.4). 61 MMeessssaaggeess MMeessssaaggeess 5. Enter the desired destination and press the OK soft key to send the message. Preset Message List Menu 2.4 Using this menu, you can preset messages that you send most frequently to retrieve when writing a new message. Scroll through the list by pressing the or key. When the required message number appears, press the Options soft key. The following options are available:
Edit: allows you to write a new message or edit the selected preset message. Note: For further information about how to enter the characters, refer to page 39. Send Message: allows you to retrieve the selected message for sending. Once you have completed the message, you can send, save and send, or simply save it. Delete: allows you to delete the selected message. Write Messages Menu 2.3 Via this menu, you can write a text message of up to 160 alphanumeric characters and send it to multiple destinations. 1. Press the or key to select a setting group on which you have set up default information on the SMS feature via the Setup menu (see the page 64), and press the Select soft key. 2. Create a message. For further information about how to enter the characters in your message, see page 39. 3. When you finish entering a message, press the OK soft key. Note: While entering a message, pressing the key allows you to start new line. 4. Select the desired option by pressing the or key, and press the Select soft key. The following options are available:
Send Only: sends the message immediately. After transmission, the message is cleared. Save and Send: allows you to save a copy of the message. When you read the message in your outbox, Sent displays to indicate the message status. Save only: allows you to save the message so that it can be sent later. You do not take the next step. When you read the message in your outbox, Not sent displays. 62 63 MMeessssaaggeess Setup Menu 2.5 Via this menu, you can set up default information for the SMS feature. A setting group is a collection of settings required to send messages. Five setting groups are available. Select the desired number by pressing the key, and press the key or the Select soft key. Then, set up the options for the group. or The following setup options are available:
Setting Name: allows you to give a name to the setting group currently being defined. Callback Number: allows you to set the phone number to which the recipient of your SMS message may send you a reply message via your message center, if the service is provided by the network. Manual Ack: allows you to activate or deactivate the manual acknowledgement function. When this function is activated, the recipient can send you an answer to your message by one touch of a number key. Delivery Ack: allows you to activate or deactivate the delivery acknowledgement function. When this function is activated, the network informs you whether or not your message has been read by the recipient. MMeessssaaggeess Privacy: allows you to set the restriction feature. When this option is set to Restricted, the recipient must have the password which you have set when writing a message to see the message. If you do not want to use the feature, select Not Restricted. Urgency: allows you to set the urgency status of the messages. Bulk, Normal, Urgent and Very Urgent are available. Type: allows you to set the type of messages. The available types are Text and E-mail. Message Alert Setting Menu 2.6 This option allows you to set your phone to beep different tones depending on the urgency status of incoming messages; Bulk, Normal, Urgent, and Very Urgent. After you select one of the urgency options, the following types are available:
Light Only: the service light on the top left-hand corner of the phone flashes. Vibration: the phone vibrates but does not sound. Single Beep: the phone beeps once. SMS Tone x: the phone uses an SMS tone. 64 65 MMeessssaaggeess MMeessssaaggeess Picture Message Menu 2.6 In this menu, you can send an SMS message containing pictures. Your phone has several preset pictures that can be replaced with pictures received from other sources, such as the internet or remote phones. Select the desired picture from the list and press the View soft key. When the picture displays, press the Options soft key. The following options are available:
Delete: deletes the picture from the phone. The preset picture will be restored. Text Reply*: allows you to send a text reply to the sender of the selected picture. Call Back*: allows you to call the sender back. Cut Number*: allows you to extract a number from the message, so that you can call the number or save it in the Phonebook. Send: allows you to send the picture message using the selected picture. Note that the recipient's phone must support the Picture Messaging feature. Edit Text*: allows you to edit text from the message. Rename: allows you to change the title of the picture. For details about entering characters, see page 39. Notes:
Picture messages are stored in the phone memory. You cannot view them if you use your SIM card in another phone. Each picture message is made of several text messages. Therefore, sending one picture message may cost more than sending one text message. Receiving Pictures, Ring Tones, or Caller Line Icons When you receive a message from the Internet, you can hear an alert beep and a text notification appears on the display; Picture Message, Ring Tone or Caller Line Icon. You have the option of saving these items in the phones memory or discarding them.
*: unavailable when the selected picture is one of the preset pictures. 66 67 MMeessssaaggeess MMeessssaaggeess Picture Message You may send a received picture as an SMS message to another phone that supports this feature. When you receive a picture message:
To view the picture save the picture discard the picture Then press the View soft key. press the Options soft key. select Save Picture, and press the Select soft key. select a preset picture to be replaced, and press the Select soft key. press the Options soft key. select Discard, and press the Select soft key. Ring Tone You may set a received tone as your phones ring tone. When you receive a ring tone message:
To listen to the ring tone Then press the Options soft key. select Playback and press the Select soft key. press the Stop soft key to stop playing back. save the ring tone press the Options soft key. select Save and press the Select soft key. select a location and press the Select soft key. select the Yes or No soft key when the phone asks if you want to set the ring tone to the received tone. press the Options soft key. select Discard, and press the Select soft key. use the saved picture go to page 66. discard the message use the saved ring tone go to page 71. 68 69 MMeessssaaggeess Caller Line Icon You may use the received icons as a graphic for a caller group. When the memory for icons is full, you are allowed to select an old one to replace. Note that the eight default icons cannot be replaced with the downloaded ones. When you receive a caller line icon message:
To view the icon save the icon Then press the View soft key. press the Options soft key. select Save and press the Select soft key. if necessary, select an icon to be replaced, and press the Select soft key. discard the icon press the Options soft key. select Discard and press the Select soft key. use the saved icon go to page 37. Tones You can use the Tones feature to customize various settings, such as the:
ringing tone or melody, volume and type. sounds made when you press a key, make an error or receive a message. Ring Tone Menu 3.1 This option allows you to select the desired ringer tone. You can choose from different predefined bells and melodies. Each time you select a tone, it sounds for a few seconds. You can download ring tones from the Internet, and can compose tones, using the Melody Composer menu (Menu 3.9). Ring Volume Menu 3.2 This option allows you to adjust the volume level of the ringer. or key to increase or decrease the Press the level. You can also use the volume keys on the left side of the phone. The greater the number of bars you see, the greater the volume is. 70 71 TToonneess Alert Type Menu 3.3 Keypad Tone Length TToonneess Menu 3.5 This option allows you to indicate how you are to be informed of any incoming calls. The following options are available. Light Only: only the backlight is switched on; the phone neither rings nor vibrates. Melody: the phone rings using the ringer melody selected in the Ring Tone menu (Menu 3.1). Vibration: the phone vibrates but does not ring. Vibra+Melody: the phone first vibrates three times and then starts ringing. Keypad Sound Type Menu 3.4 The option allows you to select the tone that the keypad generates when you press a key. Beep, Drum and Piano are available. This option allows you to select Short or Long DTMF (dual-tone multi-frequency) tones. When you use a tele-service, such as accessing your bank account and press the keys to enter numbers into the tele-service, you are sending DTMF tones. The system used by the bank or other service determines if you need short or long DTMF tones. If the service is digital, as most are, short DTMF tone will almost always work. However, some new systems and almost all older (analog) system require you to use long DTMF tones. Error Tone Menu 3.6 This option allows you to select how the phone informs you that you have made a mistake. The following options are available:
OFF: the phone does not beep. ON: the phone beeps to indicate an invalid entry. 72 73 TToonneess Minute Minder Menu 3.7 Melody Composer TToonneess Menu 3.9 This option allows you to specify whether the phone must beep every minute during an outgoing call to keep you informed of the length of your call. The following options are available:
OFF: the phone does not beep. ON: the phone beeps every minute. Connect Tone Menu 3.8 You can set your phone to beep when your call is connected to the remote phone (or the remote phone is ringing depending on your network). The following options are available:
OFF: the phone does not beep. ON: the phone beeps when your call is connected. This option allows you to compose your own melody to be used as the ring tone. Three octaves are available. A maximum of 100 notes can be entered. You can adjust the length of the notes and add rests, as required. Composing a Melody You can compose two melodies. When you access the menu, the names of any melodies created displays. Otherwise, Melody 1 and Melody 2 appear. Select the melody that you wish to create or edit. To compose a melody Press the Edit soft key. insert a note Next soft key. move a note a semitone up move a note a semitone down change the length of a note 2 key. 8 key. 4 key one or more times until the note is of the required length. delete a note C key. enter a rest 6 key one or more times for the required length of time. 74 75 TToonneess To listen to your melody modify your melody Press the Listen soft key. Modify soft key. Saving a Melody When you are satisfied with your melody after listening to it, you can save the melody and indicate that you wish to use it as the ring tone. 1. Press the Save soft key. 2. Enter a title for the melody, and press the OK soft key. Note: For further details about how to enter characters, refer to page 39. You are asked if the melody is to be set as the ring tone. 3. To use the melody as the ring tone, press the Yes soft key. The melody is saved and set to the current ring tone. Otherwise, press the No soft key. The melody is saved only. Note: You can also select the melodies composed via the Ring Tone menu (Menu 3.1). Settings Many different features of your phone can be customized to suit your preferences via the Settings menu. Greeting Message Menu 4.1 This option allows you to set a greeting to be displayed briefly when the phone is switched on. The current message displays. To clear the existing message enter a new message save the message LCD Control Press the C key and hold it down until the message is cleared. appropriate alphanumeric keys. For further details about how to enter characters, refer to page 39. OK soft key. Menu 4.2 Using this menu option, you can set various settings for the display. Screen Mode You can select the screen to be displayed in the standby mode. 76 77 SSeettttiinnggss SSeettttiinnggss The following options are available:
Normal: the LCD displays the service providers name and the current time and date. Image Display: the LCD displays the image selected in the Select Image option. With the flip cover open, the LCD displays the same information as on the normal screen. Clock: the LCD displays the clock. Select Image This option allows you to select the image to be displayed when you set the Screen mode option to Image Display. Slide Menu This option allows you to determine how the menus display. Note: This menu may be unavailable depending on your network. The following options are available:
Disable: the menus are not slid. Enable: the menus seem to slide into position from the top, bottom, left or right, as applicable. Backlight You can select whether or not the phone uses the backlight. A marginal increase in the standby/talk time can be achieved by turning the backlight off. the key. or The following options are available:
Off: the backlight is not used. Short: the backlight comes on when you press a key or receive a call and switches off 10 seconds after the last key is pressed. Long: the backlight comes on when you press a key or receive a call and switches off 20 seconds after the last key is pressed. Contrast This option allows you to adjust the brightness of the LCD screen by pressing the also use the volume key on the left side of the phone. key. You can or Each time you press the key, you can see the LCD changing according to the current value. 78 79 SSeettttiinnggss Service Light Menu 4.3 Answer Mode SSeettttiinnggss Menu 4.5 This option allows you to select whether or not the service light at the top left-hand corner of the phone is used. The following options are available:
OFF: the service light is not used. ON: the service light flashes when the phone is ready for use. Auto Redial Menu 4.4 With the Auto Redial function, the phone makes up to ten attempts to redial a phone number after an unsuccessful call. Note: The interval between two call attempts varies depending on your network. The following options are available:
OFF: the number is not redialed. This option allows you to select how incoming calls are to be answered. The following options are available:
Open Answer: to answer a call, you can simply open the folder. When it is already open, pressing the key answers the call. AnyKey Answer: to answer a call, you can press any key except the mutes the ringer. key. Pressing the key SendKey Answer: to answer a call, you must press the key mutes the ringer. key. Pressing the External Keys Menu 4.6 This option enables or disables functions of two soft keys and the navigation keys when the flip cover is closed. ON: the number is redialed automatically. The following options are available:
Disable: the keys do not function with the flip cover closed. Enable: the keys function and you can use the menu functions with the flip cover closed. 80 81 SSeettttiinnggss Short Cut Key Menu 4.7 Active Flip SSeettttiinnggss Menu 4.8 The navigation keys can also be used as shortcut keys. When pressed in the standby mode, it allows you to access specific menu options directly. Using this menu, the following menu options can be assigned to the shortcut keys:
Calendar (Menu 5-1) Calculator (Menu 5-5) Alarm (Menu 5-4) Messages (Menu 2) Tones (Menu 3) Games (Menu 8) To Do list (Menu 5-2) Phonebook (with the entries listed by name) New Inbox (Menu 2-2-2) Voice Memo (Menu 10-3) WWW Services (Menu 9) 1. Select the key to be used as a shortcut key by key and press the Select or pressing the soft key:
Key Up Key Down This option allows you to use the voice dialling or voice command feature simply by opening the flip cover. The following options are available:
Off: the active flip feature is deactivated. Voice Dial: you can use the Voice Dial feature automatically. Voice Command: you can use the Voice Command feature automatically. Service LED Color Menu 4.9 You can select the color of the LED at the top left-
hand corner of the phone to indicate that the service is available. Select the desired color from Green, Yellow, Orange, Violet, Blue and Sky Blue. 2. Select the menu option to be assigned to the key by pressing the or key. Note: To deactivate a shortcut key, select None. 3. Press the Select soft key. 82 83 SSeettttiinnggss Language Menu 4.10 You can select a display language and a voice prompt language. The following options are available:
Text Language: you can select a display language. Voice Guiding Language: you can select a voice prompt language. You can select a language from English, Espaol and Portugus. Calling Card Menu 4.11 When you use a calling card for long distance calls, you must send the service code and the card number to the calling card service system. Using this menu, you can save these calling card information to send them automatically when you make calling card calls. Enter 4-digit security code and press the OK soft key to access the Calling Card menu. Saving Calling Card Information 1. Scroll to a calling card number by pressing the key and press the Select soft key. or 84 SSeettttiinnggss 2. If you want to set the card name, press the Select soft key. Enter the name as needed. For further details on entering characters, see page 39. 3. When you finish entering name, press the OK soft key. The name is saved. 4. Press the key to move to the Card Number menu, and press the Select soft key. 5. Enter the card number (and/or PIN if required) as listed on the back of the calling card. To enter a pause, P before the second number, press and hold the sent only by pressing the call with the calling card. Note: The order of the numbers which you must key. The number after P is key when you make a enter may vary depending on the dialing sequence your card uses. 6. When you finish entering the number, press the OK soft key. 7. To return to idle mode, press the key. Selecting a Calling Card You can set the default card to use for making a calling card calls. The number stored in the selected card is sent when you make calling card calls. 1. Scroll to the desired calling card by pressing the or key and press the Select soft key. 85 Reset Setting Menu 4.12 You can easily reset the menu settings to its factory default status. Enter the 4-digit security code and press the OK soft key. The phone immediately resets all settings to default status. Note: The security code is preset to 0000. To change this code, refer to page 96. SSeettttiinnggss 2. Select Set Default by pressing the and press the Select soft key. or key 3. The display shows the number saved for the calling card. If you are satisfied, press the Set soft key. 4. To return to idle mode, press the key. Making Calls Using the Calling Card Note: The procedure may not apply to all calling cards. Please look at the back of your calling card or contact your phone company for instructions. 1. Make a call to the calling card service system. 2. When you are connected, press the Options soft key and select Callcard Service by pressing the or key. 3. Press the OK soft key. 4. When you hear the prompting tone from the service system, press the numbers. key to send the card 5. Dial the number of the desired remote phone. 86 87 Organizer The Organizer feature enables you to:
view the calendar and organize your schedule. define a list of things to do. set the current date and time. set an alarm so that the phone rings at the specified time to remind you of an appointment, for example. use the phone as a calculator. OOrrggaanniizzeerr Writing a Memo To write or edit a memo on a specific date:
1. Select the required date in the calendar, by using the navigation keys. Note: Press the upper portion of the volume key to skip to the previous month or the lower portion to skip to the next month. 2. Press the Select soft key. An empty memo screen displays to allow you to enter your memo. Calendar Menu 5.1 3. Enter your memo and then press the OK soft key. With the Calendar feature, you can:
consult the calendar. write memos to keep track of your schedule and trigger an alarm if necessary. Consulting the Calendar When you select the Calendar menu (Menu 5.1), the calendar displays. The following options are available when you press the Options soft key:
Search All: displays all of the memos set, regardless of the day and starting with the oldest. To scroll through the memos, press the key. or Delete All: allows you to delete all of the memos. You are asked to confirm your selection. Go to date: allows you to jump to a specific date. Note: For further details about how to enter characters, refer to page 39. You are asked if you wish to set an alarm. 4. If you want the alarm to ring on the chosen day, press the Yes soft key. Otherwise, press the No soft key. 5. If you pressed Yes, set the time for the alarm and press the OK soft key. A check mark displays in front of the date in the calendar to indicate that a memo exists. Editing a Memo If you select a day for which a memo already exists, you can press the Edit soft key to edit the memo displayed. Note: For further details about how to enter characters, refer to page 39. 88 89 OOrrggaanniizzeerr OOrrggaanniizzeerr Once you have finished editing the memo, press the OK soft key. The following options are available when you press the Options soft key. Alarm: allows you to set the alarm to ring on the chosen day. Erase: allows you to delete the memo. Copy to: allows you to copy the memo to another date. Move to: allows you to change the date and time of the memo. To do List Menu 5.2 This feature allows you to:
enter a list of tasks to be done. assign a priority and a deadline to each task. sort the tasks by priority and status mark. Creating the To do List 1. Press the New soft key. 2. Enter the first task. Note: For further details on how to enter characters, see page 39. 3. Press the OK soft key. 4. Select High or Low priority by pressing the key, and press the Select soft key. or 5. Enter your deadline. If you do not want to define the deadline, press the Skip soft key. 6. Press the OK soft key to save the task. Editing the To do List If tasks are already defined in the To Do List when you select the To do List menu option (Menu 5.2), the current contents display with the associated priority and status mark. The following options are available:
Then highlight the task. To view the details for a specific task press the View soft key. change the status highlight the task. of a specific task
press the key to mark the task as completed as of the current date and time. or
) or highlight the task. press the Options soft key. select the Mark option. select the appropriate status. create a new task press the Options soft key. select the New option. enter the text, priority and deadline for the task. edit an existing task highlight the task. press the Options soft key. select the Edit option. change the text, priority and deadline for the task. 90 91 OOrrggaanniizzeerr To Then sort the existing tasks by priority or status copy a task delete a task delete all tasks press the Options soft key. select the Sort option. select the sort criterion (High, Low, Done, Undo). highlight the task. press the Options soft key. select the Copy option. change the text, priority and deadline for the task as required. highlight the task. press the Options soft key. select the Delete option. press the Options soft key. select the Delete all option. confirm the deletion by pressing the OK soft key. Time & Date Menu 5.3 This option allows you to change the current time and date displayed. You can also check the current time for Greenwich Mean Time (GMT) and 21 major cities around the world. Set Time: allows you to enter the current time. You can choose the time format via the Format menu
(Menu 5.3.4). OOrrggaanniizzeerr Note: Before setting the time, you must specify your time zone, via the World Time menu (5.3.3). Set Date: allows you to enter the day, month and year. You can change the date format via the Format menu (Menu 5.3.4). World Time: allows you to check the current time for Greenwich Mean Time (GMT) and 21 major cities around the world, by pressing the The screen shows the:
city name current date and time time difference between the selected city and key. or your city if you have set the local time (see below for further details) or GMT (by default) To select the time zone in which you are located:
1. Select the city corresponding to your time zone by pressing the The local date and time display. key. or 2. Press the Set soft key. Format: allows you to change the time and date formats. Time format: 24 Hours 12 Hours Date format: YYYY/MM/DD (year/month/day) DD/MM/YYYY (day/month/year) MM/DD/YYYY (month/day/year) 92 93 OOrrggaanniizzeerr Alarm Menu 5.4 Calculator OOrrggaanniizzeerr Menu 5.5 You can set an alarm to ring at a specific time. Note: To meet FAA safety guidelines, the alarm does not function when the phone is off. The following frequency options are available:
Once Alarm: the alarm rings only once and is then deactivated. Daily Alarm: the alarm rings every day at the same time. Monday -> Friday: the alarm rings from Monday to Friday at the same time. Monday -> Saturday: the alarm rings from Monday to Saturday at the same time. Weekly Alarm: the alarm rings every week on the same day and at the same time. To set an alarm:
1. Choose the location where you want to save the alarm settings and press the Select soft key. 2. Choose the alarm frequency option and press the Select soft key. 3. Enter the required time and press the OK soft key. 3. If you select Weekly alarm in step 1, select the day of the week and the OK soft key. To stop the alarm when it rings, press the Exit soft key. Remove Alarm: deactivates the alarm. 94 Using this feature, you can use the phone as a calculator. The calculator provides the basic arithmetic functions; addition, subtraction, multiplication and division. 1. Enter the first number using the numeric keys. 2. Press the right soft key until the required arithmetic symbol appears: + (add), - (subtract), x (multiply), / (divide). 3. Enter the second number. 4. Repeat steps 2 to 3 as many times as required. Notes:
To erase any mistakes and clear the display, press the C key. To include a decimal point or a bracket, press the left soft key until the required symbol displays. 5. To calculate the result, press the key. 6. To end the calculation, press the key. 95 Security The Security feature enables you to restrict the use of your phone to:
the people of your choice. the types of calls of your choice. Change Lock Code Menu 6.1 The lock code is a password for locking or unlocking the phone. The lock code is preset to 0000 at the factory. This menu allows you to change your current lock code to a new one. Before you can specify a new lock code, you must enter the current code. Then, enter a new code and enter it again to confirm. Change Security Code Menu 6.2 The security code is used for restriction of the use of your phone. The security code is preset to 0000 at the factory. This menu allows you to change your current security code to a new one. Before you can specify a new security code, you must enter the current code. Then, enter a new code and enter it again to confirm. Call Restriction SSeeccuurriittyy Menu 6.3 The call restriction feature allows you to restrict your calls. Call restriction can be set up in the following ways:
Restrict All Outgoing call: calls cannot be made. Restrict All Incoming call: calls cannot be received. Restrict outgoing call: calls to the phone numbers which you have specified cannot be made. To restrict the all outgoing or all incoming calls:
1. Select Restrict All Outgoing call or Restrict All Incoming call by pressing the and then press the Select soft key. or key 2. Select Enable to the feature on, and press the Select soft key. If you want to set the restriction off, select Disable. 3. Enter your security code and press the OK soft key. To set the phone numbers to be restricted:
1. Select Restrict outgoing call by pressing the key and then press the Select soft key. or 2. Enter your security code and press the OK soft key. 96 97 SSeeccuurriittyy 3. Select an empty location by pressing the key, and press the Options soft key. or 4. Select Edit, and then the OK soft key. If a number has already been saved, this option allows you to edit the number. If you want to erase a saved number, select Erase. When a confirmation displays, press the Yes soft key. 5. Enter the phone number and press the OK soft key. The phone number is saved and now you cannot make a call to the number. SOS Call List Menu 6.4 Your phone provides emergency numbers for SOS calls programmed by the service provider. Three numbers including 911 can be manually dialed at any time even when the phone is locked or all of the outgoing calls are restricted. To make an SOS call when the phone is locked, press the SOS soft key, select the desired number saved in the SOS call list, and then press the Call soft key 98 Network Services These menu functions are network services. Please contact your service provider to check for their availability and subscribe to them, if you wish. Call Diverting Menu 7.1 Note: For using the Call Diverting service, you must set the service code for it. Depending on the Set Service Code setting, this menu may not appear. For details, see page 101. This network service enables incoming calls to be rerouted to the number that you specify. Example: You may wish to divert your business calls to a colleague while you are on holiday. Call diverting can be set up in the following ways:
1. Select the type of the call diverting options by key, and press the Select pressing the soft key. or Divert Always: all calls are diverted. Busy: calls are diverted if you are already on another call. No Reply: calls are diverted if you do not answer the phone. Unreachable: calls are diverted if you are not in an area covered by your service provider. Cancel All: all call diverting options are canceled. 99 NNeettwwoorrkk SSeerrvviicceess NNeettwwoorrkk SSeerrvviicceess 2. When Activate highlights, press the Select soft key. 3. Enter the number to which the calls are to be diverted, and press the OK soft key. Note: The Names soft key visible when you do not enter anything allows you to search for a number in your Phonebook. The phone sends your setting to the network and the networks acknowledgement displays. You can deactivate each call diverting setting by selecting the Cancel option. Call Waiting Menu 7.2 This network service enables you to be informed when someone is trying to reach you during another call. Note: For using the Call Waiting service, you must set the service code for it. Depending on the Set Service Code setting, this menu may not appear. For details, see page 101. The following options are available:
Activate: activates the Call Waiting feature. You can answer an incoming call while you have a call in progress. See page 48 for answering a waiting call. Cancel: deactivates the Call Waiting feature. Network Selection Menu 7.3 The Network Selection feature enables you to automatically or manually select the network used when roaming outside of your home area. Note: You can select a network other than your home network only if it has a valid roaming agreement with your home network. The following options are available:
Automatic: your phone automatically searches for a network available and chooses the appropriate one. Every time you switch your phone on, this menu resets to Automatic. Manual: your phone searches for available networks, and then displays them. Press the or key until the preferred network highlights and then press the OK soft key. New Search: your phone begins a new search for new Private and Residential systems. When finding the best new system, the phone displays it. Then you can confirm by pressing the Select soft key, or start another search by pressing the Next soft key. 100 101 NNeettwwoorrkk SSeerrvviicceess NNeettwwoorrkk SSeerrvviicceess Voice Privacy Menu 7.4 Used only in digital networks, Voice Privacy encrypts the voice channel so that people cannot eavesdrop on your call conversation. If you turn this feature on and voice privacy becomes inactive for any reason your phone displays Voice privacy not active and beeps. The following options are available:
Activate: turns this feature on. Your calls are secured. Deactivate: turns this feature off. Note: This feature may not be available in all of the areas. Contact your service provider for details and availability. NAM Selection Menu 7.5 The service provider programs your phone with the phone number and system information when your phone is first activated. This is called a Number Assignment Module (NAM). For example, your phone can be activated in up to 4 different service areas each giving your phone a different phone number or account. Only one number can be active at a time. When you select a phone number, you are also selecting which system to be used as your home system. The first phone number displayed with this menu is the currently selected number. 102 Notes:
It may not be necessary to have four NAMs for your phone if your service provider has service or roaming agreements for each area in which you wish to use your phone. Contact your service provider for details. You need at least one active number to make a call. You cannot change the NAM to another during a call. Set Service Code Menu 7.6 For using the network services, such as Call Diverting and Call Waiting, you must set the service codes supplied by your service provider with this menu. For more information on the service code, contact your service provider. Call Divertion: allows you to set the codes for using each of the options in the Call Diverting menu;
Divert Always, Busy, No Reply, Unreachable and Cancel All . Call Waiting: allows you to set the codes for using each of the options in the Call Waiting menu;
Activate and Cancel . After selecting the desired option, enter the service code and press the OK soft key. The service code is saved and the option is selectable when you access the appropriate menu. 103 NNeettwwoorrkk SSeerrvviicceess Public System Selection Menu 7.7 Note: This menu may not be shown depending on the service provider. When your system leaves its home system, it is roaming. Roaming is a feature which is only relevant in areas where there are usually at least two service providers which are referred to as A and B and have valid roaming agreements. When the phone is roaming, it can automatically search for home-type systems (same type as your home system) or non-
home type systems (opposite type as your home system). Also, your service provider has programmed a list of preferred systems into your phone. The public system selection feature of your phone enables you to choose how your phone will roam. The following options are available:
Home Type: When the service is not available in your home system, it will search for a home type, preferred first. Non HomeType: When the service is not available in your home system, it will search for a non-home type, preferred first. Anysystem: When service is not available in your home system, the phone searches for a preferred system of either type, then a home type system, then a non-home type system. HomeOnly: The phone uses its home system only that is it will not roam. Games Using this feature, you can play different games with the phone:
Casino Roulette Black Jack Sniper Snake Mole Othello Fortress Ice Cave Once you have selected a game, the following options are available:
Play/New game: allows you to start a new game. Configuration: allows you to configure the phone for the chosen game (backlight and sound settings). To adjust each setting, highlight the Backlight or Sound option by pressing the key, and then switch between ON (
) by pressing the On/Off soft key.
) and OFF (
or Instructions/Key info: describes the buttons used by the game. If necessary, press the key to see a more detailed description. or Continue: allows you to continue the game you previously saved. This option is available only when you saved a game. 104 105 GGaammeess High Score: enables you to view the highest score recorded for the selected game. You can also reset this score by pressing the Reset soft key. The options are may differ and some options may not be shown depending on games. If you break the current record for the game, the phone displays the High Score screen. To stop playing a game, press the C or key. Voice Functions You can use the Voice feature to customize various settings, such as the:
Voice Dial Voice Command Voice Memo Voice Dial Menu 10-1 The voice dialling feature allows you to make phone calls by saying a voice tag that has been added to a desired name and phone number. Any spoken word, for example a name, can be a voice tag. Before using voice dialling, note that:
Voice tags are not language dependent. They are dependent on the speakers voice. The voice tags are sensitive to the background noise. Record them and make calls in a quiet environment. When recording a voice tag or making a call, hold the phone in the normal position close to your ear. The maximum length for the voice tag recording is about 1.5 seconds, but very short names are not accepted. You can store up to twenty voice tags in the phones memory. The phone must be in a service area with adequate cellular signal strength. 106 107 VVooiiccee FFuunnccttiioonnss VVooiiccee FFuunnccttiioonnss Record This option allows you to record names and register numbers for voice dialling. Say the name you want to use for voice dialling after you hear a voice prompt. For best results, use names with at least two syllables, or use both a first and last name. The phone stores the name as a first sample, and then prompts you to say the name two times. Respond to the prompts by repeating the name. The phone stores the name and then requests the phone number. To store the number, press the OK soft key. Follow the instructions described on page 30 to complete storing number into your internal phonebook. Act This option activates voice dialling. You hear a voice prompt and Say Name displays. Say the voice tag clearly. If no match for the voice tag is found or recognized, the phone may ask you to try again. The phone automatically dials the number of the recognized voice tag. Note: This option appears only when you have already recorded some names. Delete One This option allows you to delete an individual voice tag. The corresponding phone number remains in the phonebook but the voice tag is deleted. If the name displayed is Press the to be deleted not to be deleted OK soft key. or key. The next name is displayed. To exit the Voice Dial Delete One option, press the soft key. Play One This option allows you to play back a recorded voice tag. Delete All This option allows you to delete all of the voice tags. The corresponding phone numbers remain in the phonebook but the voice tags are all deleted. Press the OK soft key when the message Delete All Confirm? displays. Otherwise, press the Cancel soft key to exit the function without deleting the voice tags. 108 109 VVooiiccee FFuunnccttiioonnss VVooiiccee FFuunnccttiioonnss Voice Command Menu 10-2 This menu allows you to get a quick access to the frequently used menus by saying your own voice command. You can select the following functions:
Record: Depending on the SIM, the most frequently used menu functions are provided to be recorded with your voice. The menus are preset to OFF at the factory, indicating that they are not recorded. When voice commands are recorded successfully, the menus are changed to ON on the display. Act: Activates the voice command. Use this menu to access the menu with the recorded voice command. Play One: Plays a voice commands you have recorded. Delete All : Deletes all of the commands you have recorded. Voice Memo Menu 10-3 You can use the Voice Memo feature to :
record voice memos. play the recorded voice memos. delete one or all of the voice memos. Record: This option allows you to record a memo. The screen displays the:
memo location. date and time when the memo was recorded. recording time counter. The maximum recording time is about 35 seconds. If you want to record for longer, press the Continue soft key. Split appears instead of Continue. You can continue recording and the rest of the memo is stored in the next memo location. To stop recording, press the Stop soft key. Note: If all of the memo locations are full, you must delete an old memo before recording a new one. Replay & Delete: This option allows you to play back a recorded message and delete it, if you want. Press the Skip soft key to skip to the next memo and press Stop soft key to stop the playback. Delete All: This option allows you to delete all of the memos. Press the OK soft key to confirm. Edit Title: This option allows you to change the title of the selected memo. 110 111 Solving Problems Before contacting the after-sales service, perform the following simple checks. They may save you the time and expense of an unnecessary service call. No service, Network failure or Not done is displayed The network connection was lost. You may be in a weak reception area (in a tunnel or surrounded by buildings). Move and try again. You are trying to access an option for which you have not taken out a subscription with your service provider. Contact the service provider for further details. You have entered a number but it was not dialed Have you pressed the Are you accessing the right cellular network?
You may have chosen to restrict outgoing calls. key?
Your correspondent cannot reach you Is your phone switched on (the for more than one second)?
key pressed Are you accessing the right cellular network?
You may have chosen to restrict incoming calls. You may be in a weak signal area. More and try again. Your correspondent cannot hear you speaking Have you switched off the microphone (mute)?
Are you holding the phone close enough to your mouth? The microphone is located on the bottom center of the phone. The phone starts beeping and **Warning**
Low Battery flashes on the display The battery power is weak. Replace the battery and recharge it. The audio quality of the call is poor Check the signal strength indicator on the display
signal strength from strong (
); the number of bars after it indicates the
). Try moving the phone slightly or moving closer to
) to weak (
a window if you are in a building. No number is dialed when you recall a Phonebook entry Check that the numbers have been stored correctly, by using the Phonebook Search feature. Re-store the number, if necessary. If the above guidelines do not enable you to solve the problem, take a note of:
The model and serial numbers of your phone Your warranty details A clear description of the problem Then contact your local dealer or Samsung after-sales service. 112 113 Health and Safety Information Exposure to Radio Frequency (RF) Signals Your mobile phone is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population. Those guidelines are consistent with the safety standard previously set by both U.S. and international standards bodies:
American National Standards Institute (ANSI) IEEE. C95.1-1992 National Council on Radiation Protection and Measurement (NCRP). Report 86 International Commission on Non-Ionizing Radiation Protection (ICNIRP) 1996 Ministry of Health (Canada), Safety Code 6. The standards include a substantial safety margin designed to assure the safety of all persons, regardless of age and health. The exposure standard for wireless mobile phones employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg.*
* In the U.S. and Canada, the SAR limit for mobile phones used by the public is 1.6 watts/kg(w/kg) averaged over on gram of tissue. The standard incorporates a substantial margin of safety to give additional protection for the public and to account for any variations in measurements. HHeeaalltthh aanndd SSaaffeettyy IInnffoorrmmaattiioonn Tests for SAR are conducted using standard operating positions specified by the FCC with the phone transmitting at its highest certified power level in all tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR level of the phone while operation can be well below the maximum value. This is because the phone is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output. Before a phone model is available for sale to the public, it must be tested and certified to the FCC that it does not exceed the limit established by the government-adopted requirement for safe exposure. The tests are performed in positions and locations
(e.g., at the ear and worn on the body) as required by the FCC for each model. (Body-worn measurements differ among phone models, depending upon available accessories and FCC requirements). While there may be differences between the SAR levels of various phones and at various positions, they all meet the government requirement for safety exposure. For body worn operation, to maintain compliance with FCC RF exposure guidelines, use only Samsung-
approved accessories. When carrying the phone while it is on, use the specific Samsung belt-clip that has been tested for compliance. Use of non-Samsung-approved accessories may violate FCC RF exposure guidelines and should be avoided. 114 115 HHeeaalltthh aanndd SSaaffeettyy IInnffoorrmmaattiioonn HHeeaalltthh aanndd SSaaffeettyy IInnffoorrmmaattiioonn For additional information concerning exposure to radio frequency signals, see the following websites:
Federal Communications Commission (FCC) RF Safety program (select Information on Human Exposure to RF Fields from Cellular and PCS Radio Transmitters):
http://www.fcc.gov/oet/rfsafety Cellular Telecommunications Industry Association (CTIA): http://www.wow-com.com World Health Organization (WHO) International Commission on Non-ionizing Radiation Protection
(select Qs & As):
http://www.who.int/emf United Kingdom, National Radiological Protection Board: http://www.nrpb.org.uk U.S.Food and Drug Administration (FDA) Center for Devices and Radiological Health:
http://www.fda.gov/cdrh/consumer/
Precautions When Using Batteries Never use any charger or battery that is damaged in any way. Use the battery only for its intended purpose. If you use the phone near the networks base station, it uses less power; talk and standby time are greatly affected by the signal strength on the cellular network and the parameters set by the network operator. Battery charging time depends on the remaining battery charge and the type of battery and charger used. The battery can be charged and discharged hundreds of times, but it will gradually wear out. When the operation time (talk time and standby time) is noticeably shorter than normal, it is time to buy a new battery. If left unused, a fully charged battery will discharge itself over time. Use only Samsung-approved batteries and recharge your battery only with Samsung-approved chargers. When a charger is not in use, disconnect it from the power source. Do not leave the battery connected to a charger for more than a week, since overcharging may shorten its life. Extreme temperatures will affect the charging capacity of your battery: it may require cooling or warming first. 116 117 HHeeaalltthh aanndd SSaaffeettyy IInnffoorrmmaattiioonn HHeeaalltthh aanndd SSaaffeettyy IInnffoorrmmaattiioonn Do not leave the battery in hot or cold places, such as in a car in summer or winter conditions, as you will reduce the capacity and lifetime of the battery. Always try to keep the battery at room temperature. A phone with a hot or cold battery may temporarily not work, even when the battery is fully charged. Li-ion batteries are particularly affected by temperatures below 0 C (32 F). Do not short-circuit the battery. Accidental short-
circuiting can occur when a metallic object (coin, clip or pen) causes a direct connection between the + and terminals of the battery (metal strips on the battery), for example when you carry a spare battery in a pocket or bag. Short-circuiting the terminals may damage the battery or the object causing the short-circuiting. Dispose of used batteries in accordance with local regulations. Always recycle. Do not dispose of batteries in a fire. Road Safety Your wireless phone gives you the powerful ability to communicate by voice, almost anywhere, anytime. But an important responsibility accompanies the benefits of wireless phones, one that every user must uphold. When driving a car, driving is your first responsibility. When using your wireless phone behind the wheel of a car, practice good common sense and remember the following tips. 1. Get to know your wireless phone and its features, such as speed dial and redial. If available, these features help you to place your call without taking your attention off the road. 2. When available, use a hands-free device. If possible, add an extra layer of convenience and safety to your wireless phone with one of the many hands-free accessories available today. 3. Position your wireless phone within easy reach. Be able to access your wireless phone without removing your eyes from the road. If you get an incoming call at an inconvenient time, let your voice mail answer it for you. 4. Let the person you are speaking with know you are driving; if necessary, suspend the call in heavy traffic or hazardous weather conditions. Rain, sleet, snow, ice and even heavy traffic can be hazardous. 118 119 HHeeaalltthh aanndd SSaaffeettyy IInnffoorrmmaattiioonn HHeeaalltthh aanndd SSaaffeettyy IInnffoorrmmaattiioonn 5. Do not take notes or look up phone numbers while driving. Jotting down a To Do list or flipping through your phonebook takes your attention away from your primary responsibility, driving safely. 6. Dial sensibly and assess the traffic; if possible, place calls when you are not moving or before pulling into traffic. Try to plan calls when your car will be stationary. If you need to make a call while moving, dial only a few numbers, check the road and your mirrors, then continue. 7. Do not engage in stressful or emotional conversations that may be distracting. Make the people with whom you are talking aware that you are driving and suspend conversations that have the potential to divert your attention from the road. 8. Use your wireless phone to call for help. Dial the emergency number in the case of fire, traffic accident or medical emergencies. Remember, it is a free call on your wireless phone!
9. Use your wireless phone to help others in emergencies. If you see a car accident, crime in progress or other serious emergency where lives are in danger, call the emergency number, as you would want others to do for you. 10. Call roadside assistance or a special non-
emergency wireless assistance number when necessary. If you see a broken-down vehicle posing no serious hazard, a broken traffic signal, a minor traffic accident where no one appears injured, or a vehicle you know to be stolen, call roadside assistance or any other special non-
emergency wireless number. Operating Environment Remember to follow any special regulations in force in any area and always switch off your phone whenever it is forbidden to use it, or when it may cause interference or danger. When connecting the phone or any accessory to another device, read its users guide for detailed safety instructions. Do not connect incompatible products. As with other mobile radio transmitting equipment, users are advised that for the satisfactory operation of the equipment and for the safety of personnel, it is recommended that the equipment should only be used in the normal operating position (held to your ear with the antenna pointing over your shoulder). 120 121 HHeeaalltthh aanndd SSaaffeettyy IInnffoorrmmaattiioonn HHeeaalltthh aanndd SSaaffeettyy IInnffoorrmmaattiioonn Other Medical Devices If you use any other personal medical devices, consult the manufacturer of your device to determine if it is adequately shielded from external RF energy. Your physician may be able to assist you in obtaining this information. Switch off your phone in health care facilities when any regulations posted in these areas instruct you to do so. Hospitals or health care facilities may be using equipment that could be sensitive to external RF energy. Vehicles RF signals may affect improperly installed or inadequately shielded electronic systems in motor vehicles. Check with the manufacturer or its representative regarding your vehicle. You should also consult the manufacturer of any equipment that has been added to your vehicle. Posted Facilities Switch off your phone in any facility where posted notices require you to do so. Electronic Devices Most modern electronic equipment is shielded from radio frequency (RF) signals. However, certain electronic equipment may not be shielded against the RF signals from your wireless phone. Consult the manufacturer to discuss alternatives. Pacemakers Pacemaker manufacturers recommend that a minimum distance of 15 cm (6 inches) be maintained between a wireless phone and a pacemaker to avoid potential interference with the pacemaker. These recommendations are consistent with the independent research and recommendations of Wireless Technology Research. Persons with pacemakers:
Should always keep the phone more than 15 cm (6 inches) from their pacemaker when the phone is switched on Should not carry the phone in a breast pocket Should use the ear opposite the pacemaker to minimize potential interference If you have any reason to suspect that interference is taking place, switch off your phone immediately. Hearing Aids Some digital wireless phones may interfere with some hearing aids. In the event of such interference, you may wish to consult your hearing aid manufacturer to discuss alternatives. 122 123 HHeeaalltthh aanndd SSaaffeettyy IInnffoorrmmaattiioonn HHeeaalltthh aanndd SSaaffeettyy IInnffoorrmmaattiioonn Potentially Explosive Atmospheres Other Important Safety Information Switch off your phone when in any area with a potentially explosive atmosphere and obey all signs and instructions. Sparks in such areas could cause an explosion or fire resulting in bodily injury or even death. Users are advised to switch off the phone while at a refueling point (service station). Users are reminded of the need to observe restrictions on the use of radio equipment in fuel depots (fuel storage and distribution areas), chemical plants or where blasting operations are in progress. Areas with a potentially explosive atmosphere are often but not always clearly marked. They include below deck on boats, chemical transfer or storage facilities, vehicles using liquefied petroleum gas
(such as propane or butane), areas where the air contains chemicals or particles, such as grain, dust or metal powders, and any other area where you would normally be advised to turn off your vehicle engine. Only qualified personnel should service the phone or install the phone in a vehicle. Faulty installation or service may be dangerous and may invalidate any warranty applicable to the device. Check regularly that all wireless phone equipment in your vehicle is mounted and operating properly. Do not store or carry flammable liquids, gases or explosive materials in the same compartment as the phone, its parts or accessories. For vehicles equipped with an air bag, remember that an air bag inflates with great force. Do not place objects, including both installed or portable wireless equipment in the area over the air bag or in the air bag deployment area. If wireless equipment is improperly installed and the air bag inflates, serious injury could result. Switch off your phone before boarding an aircraft. The use of wireless phones in aircraft may be dangerous to the operation of the aircraft, and is illegal. Failure to observe these instructions may lead to the suspension or denial of telephone services to the offender, or legal action, or both. 124 125 HHeeaalltthh aanndd SSaaffeettyy IInnffoorrmmaattiioonn HHeeaalltthh aanndd SSaaffeettyy IInnffoorrmmaattiioonn Emergency Calls Important!
This phone, like any wireless phone, operates using radio signals, wireless and landline networks as well as user-programmed functions, which cannot guarantee connection in all conditions. Therefore, you should never rely solely on any wireless phone for essential communications (medical emergencies, for example). Remember, to make or receive any calls the phone must be switched on and in a service area with adequate signal strength. Emergency calls may not be possible on all wireless phone networks or when certain network services and/or phone features are in use. Check with local service providers. To make an emergency call, proceed as follows. 1. If the phone is not on, switch it on. 2. Key in the emergency number for your present location. Emergency numbers vary by location. 3. Press the key. If certain features are in use (call barring, for example), you may first need to deactivate those features before you can make an emergency call. Consult this document and your local cellular service provider. When making an emergency call, remember to give all the necessary information as accurately as possible. Remember that your phone may be the only means of communication at the scene of an accident;
do not cut off the call until given permission to do so. Care and Maintenance Your phone is a product of superior design and craftsmanship and should be treated with care. The suggestions below will help you fulfill any warranty obligations and allow you to enjoy this product for many years. Keep the phone and all its parts and accessories out of the reach of small childrens. Keep the phone dry. Precipitation, humidity and liquids contain minerals that will corrode electronic circuits. Do not touch the phone with wet hands while it is charging. Doing so may give you an electric shock or damage the phone. Do not use or store the phone in dusty, dirty areas, as its moving parts may be damaged. Do not store the phone in hot areas. High temperatures can shorten the life of electronic devices, damage batteries, and warp or melt certain plastics. Do not store the phone in cold areas. When the phone warms up to its normal operating temperature, moisture can form inside the phone, which may damage the phones electronic circuit boards. 126 127 HHeeaalltthh aanndd SSaaffeettyy IInnffoorrmmaattiioonn Do not drop, knock or shake the phone. Rough handling can break internal circuit boards. Do not use harsh chemicals, cleaning solvents or strong detergents to clean the phone. Wipe it with a soft cloth slightly dampened in a mild soap-and-
water solution. Do not paint the phone. Paint can clog the devices moving parts and prevent proper operation. Do not put the phone in or on heating devices, such as a microwave oven, a stove or a radiator. The phone may explode when overheated. Use only the supplied or an approved replacement antenna. Unauthorized antennas or modified accessories may damage the phone and violate regulations governing radio devices. If the phone, battery, charger or any accessory is not working properly, take it to your nearest qualified service facility. The personnel there will assist you, and if necessary, arrange for service. FCC Compliance Information This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) This device must accept any interference received. Including interference that may cause undesired operation. Glossary To help you understand the main technical terms and abbreviations used in this booklet and take full advantage of the features on your mobile phone, here are a few definitions. Antenna A device for transmitting or receiving signals. The size and shape of antennas is determined, in part, by the frequency of the signal they receive. Wireless phones and the base station must have antennas. Call Diverting Ability to reroute calls to another mobile or fixed line. Call Holding Ability to put one call on standby while answering or making another call; you can then switch between the two calls, as required. Calling Line Identification Services (Caller-ID) Services allowing subscribers to view or block the telephone numbers of callers. Call Waiting Ability to inform users that they have an incoming call when engaged on another call. 128 129 GGlloossssaarryy GGlloossssaarryy Conference Calling Ability to establish a conference call involving up to two additional parties. Hands-Free A feature that permits a driver to use a wireless phone without lifting or holding the handset - an important safety feature for automobiles, tractors and most other motorized vehicles. LCD (Liquid Crystal Display) Commonly used to refer to the screen display on the wireless phone. Phone Password Lock code used to unlock the phone when you have selected the option to lock it automatically each time it switches on, and security code used to restrict the use of your phone. Roaming Use of your phone when you are outside your home area (when travelling for example). SMS (Short Message Service) Network service for sending and receiving messages to and from another subscriber without having to speak to the correspondent. The message created or received can be displayed, received, edited or sent. Soft Keys Keys marked of which:
Varies according to the function that you are and on the phone, the purpose currently using Is indicated on the bottom line of the display just above the corresponding key TDMA Time division multiple access (TDMA) is a digital transmission technology that allows a number of users to access a single radio-frequency (RF) channel without interference by allocating unique time slots to each user within each channel. The TDMA digital transmission scheme multiplexes three signals over a single channel. The current TDMA standard for cellular divides a single channel into six time slots, with each signal using two slots, providing a 3 to 1 gain in capacity over advanced mobile-phone service
(AMPS). Each caller is assigned a specific time slot for transmission. Voice Mail A computerized answering service that answers a call, plays a greeting and records a message. 130 131 Index IInnddeexx redialing automatically 80 restriction (6.3) 97 SOS (6.4) 98 time (1.4) 58 via the phonebook 20 waiting (7.2) 100 Care 125 Changing lock code (6.1) 96 security code (6.2) 96 Characters entering 39 Charging batteries 15 Composer Melody (3.9) 75 Conference calls 49 Connect to Voice Mail (2.1) 59 tone (3.8) 74 Contrast 79 Correcting numbers 19 D Date format (5.3.4) 93 setting (5.3.2) 93 Deleting memos 90 missed calls 23 phonebook numbers 34 tasks 92 voice memo 110 Display 10 contrast 79 icons 11 setting the language (4.9) 83 Diverting calls (7.1) 99 A Accessories 7 Active flip (4.8) 83 Adjusting volume 21 Alarm (5.4) 94 Alert Type (3.3) 72 Answering a call 22 a second call 48 Answer mode (4.5) 81 Auto Redial (4.4) 80 B Backlight 12; 79 contrast 79 Batteries charging 15 installing 13 low battery indicator 16 precautions 115 removing 14 C Calculator (5.5) 95 Calendar (5.1) 88 Caller group 37 line icon 67 Calling card(4.11) 84 Calls answering 22 a second call 48 calling card 46 conference 49 diverting (7.1) 99 ending 19 holding 47 incoming (1.2) 57 making 19 missed 23; 57 outgoing (1.3) 58 records (1) 57 E Earpiece Editing adjusting the volume 21 memos 89 messages 66 missed calls 24 phonebook numbers 34 To Do List 91 Erasing memos 89 missed calls 23 phonebook numbers 34 tasks 92 voice memo 110 Error Tone (3.6) 73 External Keys (4.6) 81 F Functions selecting 27 G Games (8) 105 Greeting Message (4.1) 77 Groups caller 37 H Holding calls 47 I Icons description 11 Identifying a caller 23 Incoming Calls (1.2) 57 K Key tones adjusting the volume 21 muting 44 sending 44 Keys description 9 external 81 location 8 L Language (4.10) 84 Last number redialing 20 Length of calls 58 Letters entering 39 Light backlight 12; 79 service 12; 80 Lock code 96 Locking phone 18 Low battery indicator 16 M Maintenance 125 Melody Composer (3.9) 75 Memory status 38 Memos editing 89 erasing 90 writing 89 Menus by scrolling 50 by shortcut 51 list 52 using 50 Messages greeting (4.1) 77 preset (2.4) 63 reading (2.2) 60 setup (2.5) 64 voice mail (2.1) 59 writing (2.3) 62 132 133 IInnddeexx IInnddeexx P Phone locking 18 Settings (4) 77 switching on/off 17 Phonebook 30 dialing 35 editing numbers 34 erasing numbers 34 making calls 20 moving numbers 35 options 36 searching 31 storing numbers/names 30 Playing, voice memo 111 Preset Message List (2.4) 63 Problem solving 112 R Read Messages (2.2) 60 Recording, voice memo 111 Redialing automatically 80 last number 20 Reset Setting (4.12) 87 Restriction, call 97 Ring Tone (3.1) 71 type 72 Volume (3.2) 71 M (continued) Minute Minder (3.7) 74 Missed calls (1.1) 57 deleting 23 editing the number 23 viewing 23; 57 Mute key tones 44 N NAM, selecting (7.5) 102 Names entering 39 options 36 searching/dialing 31 storing in the phonebook 30 Network Selection (7.3) 101 Network Services (7) 99 Number correcting 19 editing missed call 23 phonebook 34 erasing phonebook 34 moving phonebook 35 own 38 redialing 20 automatically 80 searching/dialing 31 storing in the phonebook 30 O Options selecting 27 Organizer (5) 88 Outgoing Calls (1.3) 58 Own Number 38 Text messages 62 preset (2.4) 63 reading (2.2) 60 setup (2.5) 64 writing (2.3) 62 Time calls (1.4) 58 format (5.3.4) 93 setting (5.3.1) 92 world (5.3.3) 93 To do List (5.2) 90 Tone connect (3.8) 74 error (3.6) 73 length (3.5) 73 melody 72 SMS (2.6) 65 ring (3.1) 71 Travel charger 15 V Vibration 72 Voice Command (10.2) 110 Voice mail (2.1) 59 Voice memo 110 Voice privacy (7.4) 102 Voice Server Number
(2.1.2) 60 Volume adjusting 21 selecting the ring (3.2) 71 W Waiting call 100 World Time (5.3.3) 93 Write Messages (2.3) 62 Writing memos 89 S Safety batteries 117 information 114 precautions 5 Security (6) 96 Searching for names/numbers Security code 96 Selecting functions/options 31 27 Sending key tones 44 messages 62 Service code (7.6) 103 Service light 12; 80 Setting alarm (5.4) 94 date (5.3.2) 93 display language 84 time (5.3.1) 92 Settings resetting (4.12) 87 Setup (2.5) 64 Shortcut Key (4.7) 82 Silent mode 25 Slide Menu 78 SMS setup (2.5) 64 Tone (3.5) 73 using 59 Soft keys, using 26 Solving problems 112 SOS Call List (6.4) 98 Sound Settings (3) 71 Speed Dialing 35 Switching on/off phone 17 T Tasks defining 90 deleting 92 editing 91 sorting 92 134 135
. r e b m u n e h t r e t n E
. s s e r P
. s s e r p y l f e i r B l l a C a e k a M l l a C a d n E d n a r e d o f l e h t n e p O t f o s w e i V e h t s s e r p
. y e k e h t h g u o r h t l l o r c S e h t e h t g n i s s e r p y b s l l a c d e s s i m
. y e k r o
, l l a c e h t n r u t e r o T
. s s e r p i d e s s M w e V i i d e s s m e r e w t h g i r s l l a C y e h t r e t f a 5 9 3 N
H T S e n o h p e e T l e l i b o M A M D T d r a C e c n e r e f e R i k c u Q
. l d o h d n a s s e r P f f O
n O h c t i w S r o
. y e k t f o s u n e M e h t s s e r P e h t h c a e r u o y l i t n u s u n e m f o t s i l e h t h g u o r h t l l o r c S y b u n e m d e r i u q e r e h t g n i s s e r p
. y e k u n e M e h t n o i t c n u F s s e c c A
. y e k t f o s t c e l e S e h t s s e r P f o t s i l e h t h g u o r h t l l o r c S d e r i u q e r e h t l i t n u s n o i t p o r o y b d e t c e e s s i l e n o e h t e h t g n i s s e r p
. y e k
. y e k t f o s t c e l e S e h t s s e r P
) y a l p s i d e h t n o e n i l m o t t o b
t i e v o b a t x e t e h t y b d e t a c i d n i n o i t c n u f e h t s m r o f r e p
) d n a
s y e k t f o s o w t e h t f o h c a E 136 137 l A e r t T y p e C h o o s e t h e l V o u m e j A d u s t t h e C a l l A n s w e r a o r P r e s s
. O p e n t h e l f o d e r p h o n e
. o n t h e l e f t s i d e o f t h e P r e s s t h e l v o u m e k e y s m e n u o p t i o n
3 3
. l S e e c t t h e A l e r t T y p e k e y t o c o n f i r m
. P r e s s t h e S e l e c t s o f t V i b r a
M e l o d y
. V i b r a t i o n
, L i g h t O n l y
, a n d l S e e c t a n o p t i o n
M e l o d y
, P h o n e b o o k i n t h e a N u m b e r S e a r c h f o r S t o r e i n t h e N u m b e r s P h o n e b o o k t h e O K s o f t k e y
. E n t e r t h e n a m e
, a n d p r e s s t h e S e l e c t l S e e c t t h e l s o f t k e y a b e l
, a n d p r e s s E n t e r t h e n u m b e r
. P r e s s t h e S a v e s o f t k e y
. k e y
. n a m e s
, p r e s s t h e T o s c r o l l t h r o u g h t h e o r P r e s s t h e S e a r c h s o f t k e y
. n a m e
. E n t e r t h e f i r s t l e t t e r s o f t h e P r e s s t h e O K s o f t k e y
. P r e s s t h e N a m e s s o f t k e y
. l o c a t i o n
. I f n e c e s s a r y
, c h a n g e t h e k e y
. T o m a k e a c a l l
, p r e s s t h e 138
1 | Users Manual per CRN 7159 | Users Manual | 75.89 KiB | / December 02 2003 |
Health and Safety Information Exposure to Radio Frequency (RF) Signals Your mobile phone is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population. Those guidelines are consistent with the safety standard previously set by both U.S. and international standards bodies:
American National Standards Institute (ANSI) IEEE. C95.1-1992 National Council on Radiation Protection and Measurement (NCRP). Report 86 International Commission on Non-Ionizing Radiation Protection (ICNIRP) 1996 Ministry of Health (Canada), Safety Code 6. The standards include a substantial safety margin designed to assure the safety of all persons, regardless of age and health. The exposure standard for wireless mobile phones employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg.*
* In the U.S. and Canada, the SAR limit for mobile phones used by the public is 1.6 watts/kg(w/kg) averaged over on gram of tissue. The standard incorporates a substantial margin of safety to give additional protection for the public and to account for any variations in measurements. HHeeaalltthh aanndd SSaaffeettyy IInnffoorrmmaattiioonn Tests for SAR are conducted using standard operating positions specified by the FCC with the phone transmitting at its highest certified power level in all tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR level of the phone while operation can be well below the maximum value. This is because the phone is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output. Before a phone model is available for sale to the public, it must be tested and certified to the FCC that it does not exceed the limit established by the government-adopted requirement for safe exposure. The tests are performed in positions and locations
(e.g., at the ear and worn on the body) as required by the FCC for each model. (Body-worn measurements differ among phone models, depending upon available accessories and FCC requirements). While there may be differences between the SAR levels of various phones and at various positions, they all meet the government requirement for safety exposure. To maintain compliance with FCC RF exposure require-
ments, use only belt-clips, holsters or similar accessories that maintain a 1.5 cm. separation distance between the user's body and the back of the phone. The use of belt-
clips, holsters and similar accessories should not contain metallic components in its assembly. The use of acces-
sories that do not satisfy these requirements may not comply with FCC RF exposure requirements, and should be 114 115
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2003-02-12 | 824.04 ~ 848.97 | TNE - Licensed Non-Broadcast Transmitter Held to Ear | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2003-02-12
|
||||
1 | Applicant's complete, legal business name |
Samsung Electronics Co Ltd
|
||||
1 | FCC Registration Number (FRN) |
0027908797
|
||||
1 | Physical Address |
19 Chapin Rd., Building D
|
||||
1 |
Pine Brook, New Jersey 07058
|
|||||
1 |
United States
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
r******@pctestlab.com
|
||||
1 | TCB Scope |
B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
A3L
|
||||
1 | Equipment Product Code |
STHN395
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
J****** C******
|
||||
1 | Title |
General Manager
|
||||
1 | Telephone Number |
973-8********
|
||||
1 | Fax Number |
973-8********
|
||||
1 |
j******@samsung.com
|
|||||
app s | Technical Contact | |||||
1 | Firm Name |
PCTEST Engineering Lab., Inc.
|
||||
1 | Name |
R******** O******
|
||||
1 | Physical Address |
6660-B Dobbin Road
|
||||
1 |
Columbia, Maryland 21045
|
|||||
1 |
United States
|
|||||
1 | Telephone Number |
410-2********
|
||||
1 | Fax Number |
410-2********
|
||||
1 |
r******@pctestlab.com
|
|||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | TNE - Licensed Non-Broadcast Transmitter Held to Ear | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Dual-Mode Cellular Phone (AMPS/TDMA) | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Grant Comments | Power output listed is ERP. SAR compliance for body- worn operating configuration is based on a separation distance of 1.5 cm between the back of the unit and the body of the user. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. Belt clips or holsters may not contain metallic components. The highest reported SAR values are AMPS Head: 1.39 W/kg; Body-worn: 0.74 W/kg, TDMA Head: 0.518 W/kg; Body-worn: 0.299 W/kg | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
PCTEST Engineering Laboratory, Inc.
|
||||
1 | Name |
R****** O********
|
||||
1 | Telephone Number |
410-2********
|
||||
1 | Fax Number |
410-2********
|
||||
1 |
r******@pctestlab.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 22H | BC | 824.04 | 848.97 | 0.541 | 2.5 ppm | 40K0F8W | |||||||||||||||||||||||||||||||||
1 | 2 | 22H | BC | 824.04 | 848.97 | 0.541 | 2.5 ppm | 40K0F1D | |||||||||||||||||||||||||||||||||
1 | 3 | 22.901(d) | 824.04 | 848.97 | 0.607 | 2.5 ppm | 30K0DXW |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC