FCC ID: A3LS160 Hand PC With 802.11 Wireless LAN

Keyboard

(KB-160E) The KB-160E Keyboard is NEXiO S160s exclusive keyboard which combines functionality and mobility. You may use the external keyboard immediately by attaching it to NEXiO. Also, when on the run, the keyboard can be folded and used as a protective cover for the LCD. Keyboard Overview Guide Rib Power Connector Keyboar Hook Hook Bar Attaching/Removing the Keyboard To Attach the Keyboard 1 Place the keyboard on top of NEXiO, and then align the guide rib on keyboard with the keyboard hole on the bottom of NEXiO. 2 Push the bottom of the keyboard down to attach it to NEXiO. 3 The keyboard icon (

) will appear in the NEXiO task bar. Note You will hear a sound when the keyboard is connected or disconnected from NEXiO. To Remove the Keyboard 1 While (a) holding hook bar on keyboard to the right, (b) slide the keyboard toward the bottom side of NEXiO. b a 2 Keyboard is now disconnected. Using the Keyboard Ctrl Key Fn Key Hot Keys Shift Key

Hot Keys Executes the Calendar, Contact and Messenger pro-

grams.

Fn Key Allows you to use the orange keys.

Ctrl Key Allows you to use the green keys.

Shift Key Allows you to type capital letters or the symbols on the upper part of the keys. Note The keyboard will not work when NEXiOs Hold Button is activated or when the LCD is turned off. Note Due to the fewer number of keys (53) than a standard keyboard, the fol-

lowing features are not supported. We recommend using the software keyboard in the following instances:

- The features on a standard keyboard are activated using Ctrl + the arrow keys.

- Key entry when using the RDP (Remote Desktop Protocol) to activate the PCs Client terminal. To Lock Internal Software Keyboard You can lock the NEXiOs internal software keyboard when using the external keyboard. 1 Tap on the extended keyboard (

) icon in NEXiOs task bar.

"Lock Soft Keyboard" message appears. 2 Tap the message. The software keyboard will be locked, and (

) icon will replace (

) icon in the NEXiOs taskbar. 3 Tap on this message again to activate the software keyboard. To Keep Keyboard while not in Use Attach the keyboard to the underside of NEXiO when not in use. Turn the NEXiO so its LCD is down, and attach keyboard to the backside. Use the same method explained above. Specifications

Total number of keys 53

Size

Interface 47.6mm * 81mm * 4mm Serial

Wireless Hand PC NEXiO

(Samsung S160) Quick Reference Guide SAMSUNG DIGITall everyone's invited

- 1 -

- 2 -

NEXiO Samsung S160

- 3 -

NEXiO Powerful Mobile Office

- Pocket Internet Explorer 5.5

- Pocket Office(Word, Spreadsheet, PPT)

- PIMS compatible w/MS Outlook

- Smart Presentation Full Internet Capability

- 800*480 WVGA

: No horizontal scrolling !

- JVM, Flash Player built-in

- 802.11b(11Mbps) built-in Highest Performance

- Intel 400MHz CPU

- 64MB FROM, 128MB RAM

- WLAN built-in Various Expandability

- standard USB slot

- CF II slot

: Camera, Memory, WAN module

- PCMCIA adapter(optional)

- 4 -

Big & vivid Wide screen

- 5inch wide screen LCD

- Clear & Bright Transflective LCD

- Low power consumption LCD Enforced Battery Solution

- Li-Polymer rechargeable battery

: 3hrs for continuous Internet use

- 2nd Li-Polymer option Battery pack

: 3hrs talking time Digital Entertainments

- MP3, MPEG Player

- e-Book Viewer

- Games

- Camera & Image viewer Outstanding Design

- Slim & Sexy

: 154*91*13.4, 250g

- Homogeneous design

: keyboard cover, 2nd battery

- 5 -

Unpacking Your package contains the following items. NEXiO (Samsung S160) Stylus Ear-microphone AC Adapter Communication Cable External Display Cable Cradle Leather Cover Stand NEXiO CD Quick Reference Guide Accessory Guide Handwriting Guide

- 6 -

NEXiO (Samsung S160) Nickname of Samsung S160 Stylus Stylus that is appropriate for operating NEXiO. Kept in stylus slot on the right side. Ear-microphone Listen to music and record sound AC Adapter Supply DC power and charge battery Communication Cable Connect NEXiO to computer and transfer data between two devices External Display Cable Connect NEXiO to External Display and enable to view NEXiO screen through external display device (ex : Monitor, Project) Cradle Enable to use NEXiO at more comfortable angle and charge external battery Leather Cover Protect LCD screen Stand Inserted in the back side and stand NEXiO. Kept in CF card slot in the right side. NEXiO CD Install program in NEXiO from computer or read online manual Quick Reference Guide Explain basic operation skill Accessory Guide Show Accessory and Option items that can be purchased separately Handwriting Guide Show handwriting method

- 7 -

NEXiO Overview NEXiO Overview Front View Indicator Show NEXiO operation status Microphone Arrow Key Move cursor(item) to up/down/left/right Enter Key Run selected program Hot Key Short cut to run program Speaker Note Hot Key Launcher Backlight REC Run NEXiO Programs Turn on/off backlight Run recorder program

- 8 -

Indicator Network Show wireless LAN connection status

- On after 2 blinking : connection trial. network icon is activated if connection is successful

- On: connected to network

- Off : not connected to network Reminder Blinks at set-up reminder time Show internal battery charge status when connected to adapter

- Green: Charging complete

- Red:

- Red Blinker: Low Battery Charging proceeding Power Rear View Reset Hole Recover NEXiO when it does not operate normally

(refer "Resetting") External Battery Connector Protection Hole Fix External Battery or stick stand in to use NEXiO in a more comfortable angle

- 9 -

Left View Right View Bottom View

- 10 -

Power Button Turn on/off NEXiO Hold Button Only power button is activated in HOLD status. Touch screen is activated when power is on. Ear-microphone Port AC Adapter Port Stylus Slot Keep Stylus PCMCIA Adapter Port Insert PCMCIA Adapter (option) CF Card Slot Insert CF Card Note Since PCMCIA Adapter uses both PCMCIA Adapter Port and CF Card Slot, you cannot use CF Card when you are already using PCMCIA Adapter. Communication Port Connect to Computer, External Display, or Cradle

(refer to "Connecting to Computer", "Using External Display Device", "Using Cradle") External Keyboard Connector Protection Hole Fix Leather Cover or External Keyboard

- 11 -

Cradle overview Front Indicator Show battery charge status when connected to adapter External Battery room Attach and charge External Battery Dummy External Battery Connector NEXiO Connector Connect to Communication Port of NEXiO Note Indicator NEXiO internal Battery

- Green: Charging complete

- Red: Charging proceeding External Battery

* When you charge NEXiO internal Battery and External Battery at the same time, external battery starts being charged after internal battery is fully charged.

- 12 -

Back Communication Port Connect to Computer or External Display

(refer to "Connecting to Computer", "Using External Display Device", "Using Cradle") AC Adapter Port Stylus/Pen Stand Ear-microphone overview Ear-phone Microphone Volume control dial

- 13 -

Connecting NEXiO with peripherals This part explains connecting NEXiO with peripherals such as AC Adapter, Cradle and using. NEXiO power is supplied with AC Adapter or internal battery. Battery should be sufficiently charged with AC adapter to be in use. Note Sufficiently charge internal battery. It takes 2 1/2 hours to fully charge internal battery. If you want to charge quickly, charge 2 hours and you will be able to use. Connecting AC Adapter Attaching Cover Fit cover to 4 protection holes in the NEXiO bottom. While pressing cover against NEXiO, slide two lock buttons to arrow direction and fix cover.

- 14 -

To detach cover from NEXiO, slide two lock buttons in the opposite direction of arrow and pull cover out. Attaching Stand Fit stand to one of 4 protection holes in the rear. You can use NEXiO in a more comfortable angle.

- 15 -

Fitting to Cradle connecting adapter fitting NEXiO to cradle Note You cannot use fit NEXiO to cradle when AC adapter is connected to NEXiO. To use cradle, connect adapter to the back side of cradle. Connecting to Computer You can transfer data and install program in NEXiO by connecting Communication Port of NEXiO to a Computer.

(refer to "Connecting to computer") Connect Communication Port of NEXiO and USB Port of computer with Communication Cable. directly connecting with NEXiO connecting through Cradle

- 16 -

Connecting External Display Device You can view NEXiO screen through external display device and present reports by connecting External Display Device such as Monitor and Projection. (refer to "Connecting external display device") Connect Communication Port of NEXiO and Monitor Cable with External Display Cable. directly connecting with NEXiO connecting through Cradle

- 17 -

Basic uses of NEXiO Turning on/off NEXiO Note When you are first using NEXiO, you have to charge internal battery sufficiently with AC Adapter before using. (Refer to

"Charging battery") Press power button on the left side of NEXiO, then NEXiO will be turned on. When you turn on NEXiO for the first time, Stylus calibration setting screen will appear. Stylus calibration setting When you turn on NEXiO for the first time, + mark will be shown on Stylus calibration setting screen. Tap on + mark to correspond stylus and the location on screen. 1. Follow instructions on screen and tap on the + marks with stylus. + marks disappears after tapping 5 times.

- 18 -

2. Tap screen once, then setting will be completed and NEXiO screen appears. Turning off NEXiO Press power button once more, then NEXiO will be turned off. Or you can tap Start > Suspend on taskbar with stylus. NEXiO runs on Flash memory, so when you turn off and on again, last screen status before turning off will be shown. Tap is softly pressing LCD screen with stylus. Refer to Note

"Using Stylus" for more information. NEXiO is automatically turned off when no action is occured in set time. To change setting, refer to "...". Learning NEXiO Program When you turn on NEXiO and finish Stylus calibration setting, NEXiO Program appears. NEXiO Program is a launch program that lets you run programs easily.

- 19 -

You will first learn about components on screen.. List of programs that are currently running and s Task bar Start Menu Button, Task bar Icon are shown. Start Task bar icon Time and Task icon are shown. Background icon more go back to former view. You can run NEXiO Programs or see help. You can see Background. Press once Program Icon: Press icon twice to run

(Background) corresponding program. Software Keyboard which lets you Shows internal battery charge status when adapter Task bar icon Software keyboard Icon to input letters will be shown Power is connected. Charging is completed Charging is proceeding W-LAN Activate Wireless Lan Network Off Comm connected to network On not connected to network Shows if NEXiO is connected with computer Note To see basic user guide about Windows CE, which is

- 20 -

operating system of NEXiO, refer to help on Start > Help >

Windows CE Basics. For more information on how to use NEXiO Programs, refer to "Using NEXiO Programs". Using Stylus Stylus is a screen touch pen to operate NEXiO, and corresponds to mouse in computers. In this section, you will learn how to input using stylus. Always use stylus to input data into screen. LCD screen Note will be damaged if you use sharp tools, so be careful. tapping. Tap Pressing screen one time. Corresponds to clicking left button in mouse. You can select item or run program by tapping. Double Tap Pressing screen two times continuously. Corresponds to double clicking left button in mouse. You can run some programs by double Drag Move to intended point while you are pressing screen. You can select an area on screen or select multiple items at once by dragging.

- 21 -

Tap and Hold Press screen for about 2 seconds. Correspones to clicking right button in mouse You can see additional functions of the selected item. If you want to use Tap and Hold function, you have to change setting. (Refer to

"Mouse right button function") If stylus is not operating normally, recalibrate. (Refer to Note

"Recalibrating")

- 22 -

Entering Text There are several ways to enter text in NEXiO.

- Using Software Keyboard which is internally embedded in NEXiO

- Using External Keyboard which is an option (refer to Accessory Guide) Software Keyboard is provided in NEXiO. so let's learn how to use Software Keyboard with stylus. Using Software Keyboard Software Keyboard is a keyboard shown on the screen. Software Keyboard is made up of Keyboard Mode, Hand Writing Mode, and Internet Mode. Tap Keyboard () Icon on the taskbar, then Software Keyboard will appear. When you first run Keyboard, Small Size Keyboard in Keyboard Mode will be shown. When you change keyboard mode and run keyboard again, recently changed mode will be shown.

( ) Software Keyboard Keyboard Mode Hand Writing Mode Internet Mode

- 23 -

Retting(Normalizing NEXiO) You can reset to normalize NEXiO when NEXiO is not operating properly. There are two ways of resetting : Soft reset, which is just shutting down all running programs, and hard reset, which is initializing NEXiO to the state when you first bought it. Soft Reset When you soft reset, all running programs are shut down and NEXiO is turned on again. To soft reset, press reset hole in the rear side with stylus. reset hole Hard Reset When NEXiO does not operate normally even after soft resetting, hard reset. When you hard reset, NEXiO is initialized to the state when you first bought it. Note When you hard reset, data and password are deleted. Reter to "Backup and restore" to save data before hard reset. To hard reset, press reset hole in the rear side with stylus while you are pressing power button.

- 24 -

power button + reset hole After hard resetting, Stylus calibration setting screen will Note appear. Refer to stylus calibration section of "Turning on/off NEXiO" to finish setting.

- 25 -

Leaning about NEXiO Programs NEXiO Programs is a launcher program that lets users to use programs in NEXiO easily. In this chapter, you will and what programs are provided in NEXiO. learn about how to use NEXiO Program Refer to online manual for more specific guide on using Note programs. Programs provided with NEXiO can be added or deleted afterward and may be different from this guide. Running NEXiO Programs When you turn on NEXiO, NEXiO Programs will be shown on the screen. NEXiO Programs screen is made up of menu and list of programs.

-menu

-program shown classified in 5 categories programs that comes under each category are If NEXiO programs is not automatically run, press NEXiO Note button on the front side of NEXiO.

- 26 -

Or tap Start > Programs > NEXiO from the taskbar, or double tab NEXiO ( ) icon on the background.

- 27 -

Notices No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, mechanical photocopying, recording or otherwise, without the prior written permission of the manufacturer. The information within this manual The manufacturer shall not be held liable for technical or editorial errors or omissions contained in herein; nor for incidental or consequential damages resulting from the furnishing, performance or use of this material. Microsoft Windows is a registered trademark of the Microsoft Corporation. Product names mentioned herein are for identification purposes only, and may be trademarks and/or registered trademarks of their respective companies. is subject to change without notice. Important Safety Information Safety Instructions Your system is designed and tested to meet the latest standards for safety of information technology equipment. However, to ensure safe use of this product, it is important that the safety instructions marked on the product and in the documentation are followed. Always follow these instructions to help guard against personal damage to your system. injury and Setting Up your System Replacement Parts and Accessories Use only replacement parts and accessories recommended by manufacturer. To reduce the risk of fire, use only No. 26 AWG or larger telecommunications line cord. Do not use this product in areas classified as hazardous. Such areas include patient care areas of medical and dental facilities, oxygen rich environments, or industrial areas. Battery Disposal Do not put rechargeable batteries or products powered by non-removable rechargeable batteries in the garbage.

- 28 -

Contact the Samsung Helpline for information on how to dispose of batteries that you cannot use or recharge any longer. Follow all local regulations when disposing of old batteries. Power Cord Requirements The power cord set (wall plug, cable and AC adapter plug) you received with your computer meets the requirements for use in the country where you purchased your equipment. Power cord sets for use in other countries must meet the requirements of the country where you use the computer. For more information on power cord set requirements, contact your authorized dealer, reseller, or service provider. General Requirements The requirements listed below are applicable to all countries:

227The length of the power cord set must be at least 6.00 feet (1. 8m) and a maximum of 9.75 feet (3.0m). All power cord sets must be approved by an acceptable accredited agency responsible for evaluation in the country where the power cord set will be used. The power cord set must have a minimum current capacity of 7 A and a nominal voltage rating of 125 or 250 volts AC, as required by each country's power system. The appliance coupler must meet the mechanical configuration of an EN 60 320/IEC 320 Standard Sheet C13 connector, for mating with appliance inlet on the computer. Regulatory Compliance Statements Wireless Guidance Low power, Radio LAN type devices (radio frequency (RF) wireless communication devices), operating in the 2.4 GHz Band, may be present

(embedded) in your notebook system. The following section is a general overview of considerations while operating a wireless device. Additional in the specific country sections (or country group sections). The wireless devices in your system are only qualified for use in the countries identified by the Radio Approval Marks on the system rating label. If the country you will be using the wireless device in, is not listed, please contact your local Radio Approval agency for requirements. Wireless devices are closely limitations, cautions, and concerns for specific countries are listed

- 29 -

regulated and use may not be allowed. The power output of the wireless device or devices that may be embedded in your notebook is well below the RF exposure limits as known at this time. Because the wireless devices (which may be embedded into your notebook) emit less energy than is allowed in radio frequency safety standards and recommendations, manufacturer believes these devices are safe for use. Regardless of the power levels, care should be taken to minimize human contact during normal operation. This transmitter must not be collocated or operate in conjunction with any other antenna or transmitter. Some circumstances require restrictions on wireless devices. Examples of common restrictions are listed below:

Radio frequency wireless communication can interfere with equipment on commercial aircraft. Current aviation regulations require wireless devices to be turned off while traveling in an airplane. 802.11B (also known as wireless Ethernet or Wifi) and Bluetooth communication devices are examples of devices that provide wireless communication. In environments where the risk of interference to other devices or services is harmful or perceived as harmful, the option to use a wireless device may be restricted or eliminated. Airports, Hospitals, and Oxygen or flammable gas laden atmospheres are limited examples where use of wireless devices may be restricted or eliminated. When in environments where you are uncertain of the sanction to use wireless devices, ask the applicable authority for authorization prior to use or turning on the wireless device. Every country has different restrictions on the use of wireless devices. Since your system is equipped with a wireless device, when traveling between countries with your system, check with the local Radio Approval authorities prior to any move or trip for any restrictions on the use of a wireless device in the destination country. If your system came equipped with an internal embedded wireless device, do not operate the wireless device unless all covers and shields are in place and the system is fully assembled. Wireless devices are not user serviceable. Do not modify them in any way. Modification to a wireless device will void the authorization to use it. Please contact manufacturer for service. Only use drivers approved for the country in which the device will be used. See the manufacturer System Restoration Kit, or contact manufacturer Technical Support for additional information. United States of America Unintentional Emitter per FCC Part 15 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) this device may not cause

- 30 -

interference in a residential interference, and (2) this device must accept any interference harmful received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful generate uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful equipment does cause harmful reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. interference will not occur in a particular installation. If this interference to radio or television installation. This equipment Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio/TV technician for help. If necessary, the user should consult the dealer or an experienced radio/television technician for additional suggestions. The user may find the following booklet helpful: omething About Interference.?This is available at FCC local regional offices. Our company is not responsible for any radio or television interference caused by unauthorized modifications of this equipment or the substitution or attachment of connecting cables and equipment other than those specified by our company. The correction will be the responsibility of the user. Use only shielded data cables with this system. Intentional emitter per FCC Part 15 Low power, Radio LAN type devices (radio frequency (RF) wireless communication devices), operating in the 2.4 GHz Band, may be present (embedded) in your notebook system. This section is only applicable if these devices are present. Refer to the system label to verify the presence of wireless devices. Wireless devices that may be in your system are only qualified for use in the United States of America if an FCC ID number is on the system label. This transmitter must not be collocated or operate in conjunction with any other antenna or transmitter. Operation of this device is subject to the following two conditions: (1) This device may not cause harmful must accept any interference received, including interference that may cause undesired operation of the device. Wireless devices are not user serviceable. Do not modify them in any interference, and (2) this device

- 31 -

way. Modification to a wireless device will void the authorization to use it. Contact manufacturer for service. FCC RF EXPOSURE INFORMATION In August 1996 the Federal Communications Commission (FCC) of the United States with its action in Report and Order FCC 96-326 adopted an updated safety standard for human exposure to radio frequency electromagnetic energy emitted by FCC regulated transmitters. Those guidelines are consistent with the safety standard previously set by both U.S. and international standards bodies. The design of this Hand PC complies with the FCC guidelines and these international standards. Use only the supplied or an approved antenna. Unauthorized antennas, modifications, or attachments could result in violation of FCC regulations. Body-worn Operation This device was tested for typical body-worn operations with the device directly contacted to the human body to the back and side of the Hand PC. To maintain compliance with FCC RF exposure compliance requirements, use other accessories should not contain metallic components in its assembly. The use of accessories that do not satisfy these requirements may not comply with FCC RF exposure compliance requirements, and should be avoided. Face Held Operation This device was tested for Face Held operations with the separation distance of 2.5 cm between the microphone of the device to the human face. While using face held operation, hold the Hand PC at least 2.5 cm(1 inch) from your face and speak in a normal voice.

- 32 -

SAMSUNG HANDHELD PERSONAL COMPUTER LIMITED WARRANTY TO ORIGINAL PURCHASER This SAMSUNG brand product, as supplied and distributed by Samsung Electronics America, Inc. (SAMSUNG) and delivered new, in the original carton to the original consumer purchaser, is warranted by SAMSUNG against manufacturing defects in materials and workmanship for a limited warranty period of:

One (1) Year Parts and Labor Carry-In/Ship-In Service*

(*90 Days Parts and Labor for Commercial Use) This limited warranty begins on the original date of purchase, and is valid only on products purchased and used in the United States. To receive warranty service, the purchaser must contact SAMSUNG for problem determination and service procedures. Warranty service can only be performed by a SAMSUNG authorized service center. The original dated bill of sale must be presented upon request as proof of purchase to SAMSUNG or SAMSUNG's authorized service center. Transportation of the product to and from the service center is the responsibility of the purchaser. SAMSUNG will repair or replace this product, at our option and at no charge as stipulated herein, with new or reconditioned parts or products if found to be defective during the limited warranty period specified above. All replaced parts and products become the property of SAMSUNG and must be returned to SAMSUNG. Replacement parts and products assume the remaining original warranty, or ninety (90) days, whichever is longer. SAMSUNG does not warrant uninterrupted or error-free operation of the product, and shall not be liable for the loss or destruction of data or media resulting from the use or service of this product. responsibility to secure all programs and data contained in or affected by the product. The purchaser is cautioned that product performance may be affected by installation, system configuration, software, applications, equipment compatibility, purchaser data and operator control of the system, among other factors, and it is the purchaser's responsibility to determine the functional It is the purchaser's implementation. the SAMSUNG brand name are set to software products distributed by SAMSUNG's obligations with respect forth in the SAMSUNG under Non-SAMSUNG hardware and applicable end user software products, if provided, are on an AS IS basis. Non-SAMSUNG manufacturers, suppliers, publishers, and service providers may provide their own warranties. license agreement. This limited warranty covers manufacturing defects in materials and workmanship encountered in normal, and except to the extent otherwise expressly provided for in this statement, noncommercial use of this product, and shall not apply to the following, including, but not limited to: damage which occurs in shipment; delivery and installation; applications and uses for which this product was not intended; altered product or serial numbers;

- 33 -

cosmetic damage or exterior finish; accidents, abuse, neglect, fire, water, lightning or other acts of nature; use of products, equipment, systems, utilities, services, parts, supplies, accessories, applications, installations, repairs, external wiring or connectors not supplied or authorized by SAMSUNG, or which damage this product or result in service problems;

incorrect electrical line voltage, fluctuations and surges; customer adjustments and failure to follow operating instructions, cleaning, maintenance and environmental instructions that are covered and prescribed in the instruction book; product removal or reinstallation; reception or display problems and distortion related to noise, echo, interference or other signal transmission and delivery problems; reduced screen brightness related to normal tube and lamp aging, or burned-in images. THERE ARE NO EXPRESS WARRANTIES OTHER THAN THOSE LISTED AND DESCRIBED ABOVE, AND NO WARRANTIES WHETHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, SHALL APPLY AFTER THE EXPRESS WARRANTY PERIODS STATED ABOVE, AND NO OTHER EXPRESS WARRANTY OR GUARANTY GIVEN BY ANY PERSON, FIRM OR CORPORATION WITH RESPECT TO THIS PRODUCT SHALL BE BINDING ON SAMSUNG. SAMSUNG SHALL NOT BE LIABLE FOR LOSS OF REVENUE OR PROFITS, FAILURE TO REALIZE SAVINGS OR OTHER BENEFITS, OR ANY OTHER SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES CAUSED BY THE USE, MISUSE OR INABILITY TO USE THIS PRODUCT, REGARDLESS OF THE LEGAL THEORY ON WHICH THE CLAIM IS BASED, AND EVEN IF SAMSUNG HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. NOR SHALL RECOVERY OF ANY KIND AGAINST SAMSUNG BE GREATER IN AMOUNT THAN THE PURCHASE PRICE OF THE PRODUCT SOLD BY SAMSUNG AND CAUSING THE ALLEGED DAMAGE. WITHOUT LIMITING THE FOREGOING, PURCHASER ASSUMES ALL RISK AND LIABILITY FOR LOSS, DAMAGE OR INJURY TO PURCHASER AND PURCHASER'S PROPERTY AND TO OTHERS AND THEIR PROPERTY ARISING OUT OF THE USE, MISUSE OR INABILITY TO USE THIS PRODUCT SOLD BY SAMSUNG NOT CAUSED DIRECTLY BY THE NEGLIGENCE OF SAMSUNG. THIS LIMITED WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE ORIGINAL PURCHASER OF THIS PRODUCT, IS NONTRANSFERABLE AND STATES YOUR EXCLUSIVE REMEDY. Some states do not allow limitations on how long an implied warranty lasts, or the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have other rights, which vary from state to state. To obtain warranty service, please contact SAMSUNG at:

SAMSUNG CUSTOMER CARE CENTER 400 Valley Road, Suite 201, Mt. Arlington, NJ 07856 Tel: 973-601-6000, Fax: 973-601-6001 XXX-XXX-XXXX and www.SAMSUNGUSA.com

- 34 -

specification OS WinCE.net (4.0 PB) CPU PXA250 300(400)MHz

(Intel) Display 5 inch Transflective WVGA TFT LCD (800*480, 64K color) Memory Flash ROM 64MB(NAND type) SDRAM 128MB(up to 256MB) Wireless Comm. WLAN(802.11b) built-in (11Mbps)

(Support CF II, PCMCIA type WAN solution) Interface CF II slot, Standard USB(Host) , USB docking port (PC sync.,VGA-out,Power charging) Keyboard port (4pin), Earphone jack (stereo) Battery Li-polymer 1500mAH (Quick charging, 2.5hrs @ 90%)

( * battery life : PDA 9hrs, WLAN 3hrs ) Sound Speaker (17 , mono), Mic (6 , mono) Earphone (stereo, VOIP support) LED Indicator 3 ea ; Red/Green (power), Orange (Alarm), Blue (Data TRX status, Email alarm) Key Buttons 4 way navigation + enter button, 2 Hot button (Launcher, Backlit), Rec., Reset, Hold switch Cover Leather cover Stylus 102.2mm, 4.5 Size 155 * 91 * 13.4 (w/ leather cover)

- 35 -

Weight 280g (incld. Battery, keyboard cover) 250g (incld. Battery, leather cover) Accessories Cradle LED (power), 2 Holes(Stylus & Pen) Charging slot for 2nd battery Detachable Sync. Cable & AC adapter

**Leather/keyboard Cover can be open on cradle

**Device with 2nd battery can be mounted on cradle Earphone 2.5 , Stereo MP3, Mic. Support Standing module CF slot built-in type, Simple & Rugged style VGA-out cable 800*600, 640*480 support, Enhanced compression rate

- 36 -

SAMSUNG DIGITall everyone's invited SAMSUNG CUSTOMER CARE CENTER 400 Valley Road, Suite 201, Mt. Arlington, NJ 07856 Tel: 973-601-6000, Fax: 973-601-6001 www.samsungnexio.com Printed in Korea.

- 37 -