all | frequencies |
|
exhibits | applications |
---|---|---|---|---|
manual |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
Users Manual | Users Manual | 1.82 MiB | ||||
1 | Block Diagram | |||||||
1 | External Photos | |||||||
1 | ID Label/Location Info | |||||||
1 | Internal Photos | |||||||
1 | Operational Description | |||||||
1 | Test Report | |||||||
1 | Test Setup Photos |
1 | Users Manual | Users Manual | 1.82 MiB |
ML-1640 Series ML-2240 Series Mono Laser Printer Users Guide imagine the possibilities Thank you for purchasing a Samsung product. To receive a more complete service, please register your product at www.samsung.com/global/register features of your new laser product Your new machine is equipped with a number of special features that improve the quality of the documents you print. With the machine, you can:
SPECIAL FEATURES Save time and money To save paper, you can print multiple pages on one single sheet of paper. This machine automatically conserves electricity by substantially reducing power consumption when not in use. Print in various environments You can print with Windows 2000 and Windows XP/2003/
Vista as well as Linux and Macintosh systems. Your machine is equipped with a USB interface. Print with excellent quality and speed You can print with a resolution of up to 1200*600 dpi. Your machine prints A4-sized paper at up to 16 ppm,(ML-
1640 series), 22 ppm (ML-2240 series) and lettersized paper at up to 17ppm (ML-1640 series), 23ppm(ML-2240 series). Handle many different types of printable material The 150-sheet tray supports plain paper in various sizes, letterhead, envelopes, labels, custom-sized media, postcards, and heavy paper. Create professional documents Print watermarks. You can customize your documents with words, such as Confidential. See Software section. Print posters. The text and pictures of each page of your document are magnified and printed across the sheet of paper and can then be taped together to form a poster. See Software section. You can use preprinted forms and letterhead with plain paper. See Software section. 2_Features of your new laser product FEATURES BY MODELS The machine is designed to support all of your document needs. Basic features of this machine include;
FEATURES ML-1640 ML-2240 USB 2.0 Full speed Duplex (2-sided) printing (Manual)
(: Included) ABOUT THIS USERS GUIDE This users guide provides information about basic understanding of the machine as well as detailed explanation on each step during the actual usage. Both novice users and professional users can refer to this guide for installing and using the machine. Some terms in this guide are used interchangeably, as below:
Document is synonymous with original. Paper is synonymous with media, or print media. Following table offers the conventions of this guide:
The explanation in this user guide is mainly based on ML-2240 Series. Some illustrations might be different for ML-1640 Series. CONVENTION DESCRIPTION EXAMPLE Bold Note Caution Footnote
(See page 1 for more information) Used for texts on the display or actual prints on the machine. Start Used to provide additional information or detailed specification of the machine function and feature. The date format may differ from country to country Used to give users information to protect the machine from possible mechanical damage or malfunction. Do not touch the green underside of the toner cartridge. Used to provide more detailed information on certain words or a phrase. a. pages per minute Used to guide users to the reference page for the additional detailed information.
(See page 1 for more information) Features of your new laser product_3 FINDING MORE INFORMATION You can find information for setting up and using your machine from the following resources, either as a print-out or onscreen. Quick Install Guide Provides information on setting up your machine and this requires that you follow the instructions in the guide to prepare the machine. Online Users Guide Provides you with step-by-step instructions for using your machines full features, and contains information for maintaining your machine, troubleshooting, and installing accessories. This users guide also contains a Software section to provide you with information on how to print documents with your machine in various operating systems, and how to use the included software utilities. You can access the users guide in other languages from the Manual folder on the printer software CD. Printer Driver Help Provides you with help information on printer driver properties and instructions for setting up the properties for printing. To access a printer driver help screen, click Help from the printer properties dialog box. Samsung website If you have Internet access, you can get help, support, printer drivers, manuals, and order information from the Samsung website, www.samsungprinter.com. 4_Features of your new laser product safety information IMPORTANT SAFETY SYMBOLS AND PRECAUTIONS What the icons and signs in this users guide mean:
Hazards or unsafe practices that may result in severe personal injury or death. Hazards or unsafe practices that may result in minor personal injury or property damage. To reduce the risk of fire, explosion, electric shock, or personal injury when using your laser MFP, follow these basic safety precautions:
WARNING CAUTION CAUTION Do NOT attempt. Do NOT disassemble. Do NOT touch. Follow directions explicitly. Unplug the power plug from the wall socket. Make sure the MFP is grounded to prevent electric shock. Call the service center for help. These warning signs are here to prevent injury to you and others. Follow them explicitly. After reading this section, keep it in a safe place for future reference. 1. Read and understand all instructions. 2. Use common sense whenever operating electrical appliances. 3. Follow all warnings and instructions marked on the machine and in the literature accompanying the machine. 4. If an operating instruction appears to conflict with safety information, heed the safety information. You may have misunderstood the operating instruction. If you cannot resolve the conflict, contact your sales or service representative for assistance. 5. Unplug the machine from the AC wall socket before cleaning. Do not use liquid or aerosol cleaners. Use only a damp cloth for cleaning. 6. Do not place the machine on an unstable cart, stand or table. It may fall, causing serious damage. 7. Your machine should never be placed on, near or over a radiator, heater, air conditioner or ventilation duct. 8. Do not allow anything to rest on the power cable. Do not locate your machine where the cords will be abused by persons walking on them. 9. Do not overload wall outlets and extension cords. This can diminish performance, and may result in the risk of fire or electric shock. 10. Do not allow pets to chew on the AC power or PC interface cords. 11. Never push objects of any kind into the machine through case or cabinet openings. They may touch dangerous voltage points, creating a risk of fire or shock. Never spill liquid of any kind onto or into the machine. 12. To reduce the risk of electric shock, do not disassemble the machine. Take it to a qualified service technician when repair work is required. Opening or removing covers may expose you to dangerous voltages or other risks. Incorrect reassembly could cause electric shock when the unit is subsequently used. Safety information_5 13. Unplug the machine from the PC and AC wall outlet, and refer servicing to qualified service personnel under the following conditions:
When any part of the power cord, plug, or connecting cable is damaged or frayed. If liquid has been spilled into the machine. If the machine has been exposed to rain or water. If the machine does not operate properly after instructions have been followed. If the machine has been dropped, or the cabinet appears damaged. If the machine exhibits a sudden and distinct change in performance. 14. Adjust only those controls covered by the operating instructions. Improper adjustment of other controls may result in damage, and may require extensive work by a qualified service technician to restore the machine to normal operation. 15. Avoid using this machine during a lightning storm. There may be a remote risk of electric shock from lightning. If possible, unplug the 16. If you continuously print multiple pages, the surface of the output tray may become hot. Be careful not to touch the surface, and keep 17. The Power cord supplied with your machine should be used for safe operation. If you are using a cord which is longer than 2 m with AC power for the duration of the lightning storm. children away from the surface. 110 V machine, then it should be 16 AWGa or bigger. 18. SAVE THESE INSTRUCTIONS 19. This machine can be operated only in the country you have purchased. (Due to different voltage, frequency, telecommunication configuration and etc) a.AWG: American Wire Gauge LASER SAFETY STATEMENT The printer is certified in the U.S. to conform to the requirements of DHHS 21 CFR, chapter 1 Subchapter J for Class I(1) laser products, and elsewhere is certified as a Class I laser product conforming to the requirements of IEC 825. Class I laser products are not considered to be hazardous. The laser system and printer are designed so there is never any human access to laser radiation above a Class I level during normal operation, user maintenance or prescribed service condition. WARNING Never operate or service the printer with the protective cover removed from Laser/Scanner assembly. The reflected beam, although invisible, can damage your eyes. When using this product, these basic safety precautions should always be followed to reduce risk of fire, electric shock, and injury to persons:
6_Safety information OZONE SAFETY During normal operation, this machine produces ozone. The ozone produced does not present a hazard to the operator. However, it is advisable that the machine be operated in a well ventilated area. If you need additional information about ozone, request your nearest Samsung dealer. POWER SAVER This printer contains advanced energy conservation technology that reduces power consumption when it is not in active use. When the printer does not receive data for an extended period of time, power consumption is automatically lowered. ENERGY STAR and the ENERGY STAR mark are registered U.S. marks. For more information on the ENERGY STAR program see http://www.energystar.gov RECYCLING Recycle or dispose of the packaging material for this product in an environmentally responsible manner. CORRECT DISPOSAL OF THIS PRODUCT (WASTE ELECTRICAL & ELECTRONIC EQUIPMENT)
(Applicable in the European Union and other European countries with separate collection systems) This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources. Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take this item for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contract. This product should not be mixed with other commercial wastes for disposal. RADIO FREQUENCY EMISSIONS FCC Information to the User This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
This device may not cause harmful interference, and This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Increase the separation between the equipment and receiver. Reorient or relocate the receiving antenna. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or experienced radio TV technician for help. Change or modifications not expressly approved by the manufacturer responsible for compliance could void the user's authority to oper-
ate the equipment. Safety information_7 Canadian Radio Interference Regulations This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus as set out in the interference-causing equipment standard entitled Digital Apparatus, ICES-003 of the Industry and Science Canada. Cet appareil numrique respecte les limites de bruits radiolectriques applicables aux appareils numriques de Classe B prescrites dans la norme sur le matriel brouilleur: Appareils Numriques, ICES-003 dicte par lIndustrie et Sciences Canada. REPLACING THE FITTED PLUG (FOR UK ONLY) Important The mains lead for this machine is fitted with a standard (BS 1363) 13 amp plug and has a 13 amp fuse. When you change or examine the fuse, you must re-fit the correct 13 amp fuse. You then need to replace the fuse cover. If you have lost the fuse cover, do not use the plug until you have another fuse cover. Contact the people from you purchased the machine. The 13 amp plug is the most widely used type in the UK and should be suitable. However, some buildings (mainly old ones) do not have normal 13 amp plug sockets. You need to buy a suitable plug adaptor. Do not remove the moulded plug. If you cut off the moulded plug, get rid of it straight away. You cannot rewire the plug and you may receive an electric shock if you plug it into a socket. Important warning:
You must earth this machine. The wires in the mains lead have the following color code:
Green and Yellow: Earth Blue: Neutral Brown: Live If the wires in the mains lead do not match the colors marked in your plug, do the following:
You must connect the green and yellow wire to the pin marked by the letter E or by the safety Earth symbol or colored green and yellow or green. You must connect the blue wire to the pin which is marked with the letter N or colored black. You must connect the brown wire to the pin which is marked with the letter L or colored red. You must have a 13 amp fuse in the plug, adaptor, or at the distribution board. DECLARATION OF CONFORMITY (EUROPEAN COUNTRIES) Approvals and Certifications The CE marking applied to this product symbolizes Samsung Electronics Co., Ltd. Declaration of Conformity with the following applicable 93/
68/EEC Directives of the European Union as of the dates indicated:
January 1, 1995: Council Directive 73/23/EEC Approximation of the laws of the member states related to low voltage equipment. January 1, 1996: Council Directive 89/336/EEC (92/31/EEC), approximation of the laws of the Member States related to electromagnetic compatibility. March 9, 1999: Council Directive 1999/5/EC on radio equipment and telecommunications terminal equipment and the mutual recognition of their conformity. A full declaration, defining the relevant Directives and referenced standards can be obtained from your Samsung Electronics Co., Ltd. representative. 8_Safety information Safety information_9 contents 2 Features of your new laser product 5 Safety information INTRODUCTION 12 Front view Rear view 12 Printer overview 12 12 13 Control panel overview 14 Understanding the control panel 14 14 14 Supplied software 15 Printer driver features 15 On-Line LEDs Cancel button Printer driver GETTING STARTED 16 16 Setting up the hardware 16 Printing a demo page 16 System requirements 16 17 17 17 Installing the software Windows Linux Macintosh SELECTING AND LOADING PRINT MEDIA 19 Specifications on print media Guidelines for special print media 19 Selecting print media 20 21 22 Loading paper 22 23 Setting the paper size and type Loading paper in the tray BASIC PRINTING 24 MAINTENANCE 25 24 Printing a document 24 Canceling a print job 25 Cleaning your machine Cleaning the outside 25 25 Cleaning the inside 26 Maintaining the cartridge Toner cartridge storage 26 Expected cartridge life 26 26 Redistributing toner 28 Replacing the toner cartridge 10_Contents contents TROUBLESHOOTING 30 In the paper exit area In the paper feed area Around the toner cartridge 30 Tips for avoiding paper jams 30 Clearing paper jams 30 31 32 32 Solving other problems 32 33 35 37 37 38 Paper feeding Printing problems Printing quality problems Common Windows problems Common Linux problems Common Macintosh problems ORDERING SUPPLIES AND ACCESSORIES 39 39 Supply 39 Maintenance parts 39 How to purchase SPECIFICATIONS 40 40 ML-1640 Series specifications 41 ML-2240 Series Specifications GLOSSARY 42 INDEX 46 CONTACT SAMSUNG WORLDWIDE 47 Contents_11 introduction These are the main components of your machine:
This chapter includes:
Printer overview Control panel overview Understanding the control panel Supplied software Printer driver features The illustrations of the machine are based on ML-2240 series. ML-1640 series does not have a manual tray. 9 Manual traya 10 Rear guides 11 Paper covera 12 Side guides a.ML-2240 only. Rear view 1 2 3 USB port Power switch Power receptacle PRINTER OVERVIEW Front view Top cover 1 2 Output tray (face down) 3 Output support 4 5 6 7 8 Control panel Front cover handle Front cover Paper input tray Toner cartridge 12 _Introduction CONTROL PANEL OVERVIEW 1 Status LED Cancel 2 Shows the status of your machine. (See "Understanding the control panel" on page 14 for more information.) Stops an operation at any time and there are more functions. (See "Understanding the control panel" on page 14 for more information.) Introduction_ 13 SUPPLIED SOFTWARE You must install the printer software using the supplied CD after you have set up your machine and connected it to your computer. CD provides you with the following software. CD Printer software CD Windows Linux Macintosh CONTENTS Printer driver: Use this driver to take full advantage of your printers features. Smart Panel: This program allows you to monitor the machines status and alerts you when an error occurs during printing. Printer driver: Use this driver to run your machine from a Linux computer and print documents. Smart Panel: This program allows you to monitor the machines status and alerts you when an error occurs during printing. Printer driver: Use this driver to run your machine from a Macintosh computer and print documents. Smart Panel: This program allows you to monitor the machines status and alerts you when an error occurs during printing. UNDERSTANDING THE CONTROL PANEL The color of the status and toner LED indicates the machine's current status. On-Line LEDs Green STATUS On DESCRIPTION The machine is warming up or ready to receive the data. Blinking The machine is printing data. Toner/Error LEDs STATUS Red On DESCRIPTION The machine is experiencing an error, such as open cover, paper empty, toner exhausted, installer error, or invalid error. The machine is experiencing a service required error, such as LSU error, or fuser error. Contact your sales or service representative. Blinking The toner is low, replace the toner soon. Rapidly Blinking The toner is empty, replace the toner soon. Orange On The machine is experiencing an error such as jammed paper.
All printing errors will be appear in the Smart Panel program window. Cancel button STATUS LED DESCRIPTION In ready mode, press and hold this button until the status LED blinks, and release. Press this button during printing. The red LED blinks while the print job is cleared from both the machine and the computer, and then the machine returns to ready mode. This may take some time depending on the size of the print job. Press this button during printing. The On Line/Error LED blinks while the print job is cleared from both the machine and the computer, and then return to ready mode. This may take some time depending on the size of the print job. In Manual Feed mode, you cant cancel the print job by pressing this button. Printing demo page Canceling print job Manual print 14 _Introduction PRINTER DRIVER FEATURES Your printer drivers support the following standard features:
Paper orientation, size, source and media type selection Number of copies In addition, you can use various special printing features. The following table shows a general overview of features supported by your printer drivers:
Printer driver FEATURE WINDOWS LINUX MACINTOSH Machine quality option Poster printing Multiple pages per sheet
(N-up) Fit to page printing Scale printing Watermark Overlay Toner Save Duplex (Manual) O O O O O O O O O O X O X O (2, 4) O (2, 4, 6, 9, 16) X X X X X X O O X X X X Introduction_ 15 getting started This chapter gives you step-by-step instructions for setting up the machine. This chapter includes:
Setting up the hardware Printing a demo page System requirements Installing the software 7. Turn the machine on. When you move the machine, do not tilt or turn it upside down. Otherwise, the inside of the machine may be contaminated by toner, which can cause damage to the machine or bad print quality. PRINTING A DEMO PAGE Print a demo page to make sure that the machine is operating correctly. To print a demo page:
In ready mode, press and hold the Cancel button for about 2 seconds. SYSTEM REQUIREMENTS Before you begin, ensure that your system meets the following requirements:
Windows Your machine supports the following Windows operating systems. OPERATING SYSTEM Windows 2000 Windows XP Windows 2003 Server Windows Vista REQUIREMENT (RECOMMENDED) CPU Pentium II 400 MHz
(Pentium III 933 MHz) Pentium III 933 MHz
(Pentium IV 1 GHz) Pentium III 933 MHz
(Pentium IV 1 GHz) Pentium IV 4.3 GHz RAM 128 MB
(256 MB) 128 MB
(256 MB) 128 MB
(512 MB) FREE HDD SPACE 600 MB 1.5 GB 1.25 GB to 2 GB 512 MB
(1024 MB) 15 GB Internet Explorer 6.0 or higher is the minimum requirement for all Windows operating systems. Users who have an administrator right can install the software. SETTING UP THE HARDWARE This section shows the steps to set up the hardware which is explained in the Quick Install Guide. Make sure you read Quick Install Guide and complete following steps. 1. Select a stable location. Select a level, stable place with adequate space for air circulation. Allow extra space to open covers and trays. The area should be well-ventilated and away from direct sunlight or sources of heat, cold, and humidity. Do not set the machine close to the edge of your desk or table. Printing is suitable for altitudes under 1,000 m (3,281 ft). Refer to the altitude setting to optimize your printing. Place the machine on a flat and stable surface, not letting it lean more than 2 mm (0.08 inches). Otherwise, it may affect the printing quality. 2. Unpack the machine and check all the enclosed items. 3. Remove the tape holding the machine tightly. 4. 5. Load paper. (See "Loading paper" on page 22.) 6. Make sure that all the cables are connected to the machine. Install all four of the toner cartridge. 16 _Getting started INSTALLING THE SOFTWARE You have to install the machine software for printing. The software includes drivers, applications, and other user friendly programs. The following procedure is based on the Windows XP operating system. The procedure and popup window which appear during the installation may differ depending on the operating system, the printer feature, or the interface in use. 1. Make sure that your machine is connected to the computer. 2. Insert the Printer Software CD-ROM into your CD-ROM drive. The CD-ROM should automatically run, and an installation window appears. If the installation window does not appear, click Start > Run. Type X:\Setup.exe, replacing X with the letter which represents your drive and click OK. If you use Windows Vista, click Start > All Programs > Accessories >
Run, and type X:\Setup.exe. If the AutoPlay window appears in Windows Vista, click Run Setup.exe in Install or run program field, and click Continue in the User Account Control window. 3. Click Next. Linux ITEM REQUIREMENTS Operating system RedHat 8.0 ~ 9.0 Fedora Core 1, 2, 3, 4 Mandrake 9.2 ~ 10.1 SuSE 8.2 ~ 9.2 Ubuntu 6.0 CPU RAM Pentium IV 1 GHz or higher 256 MB or higher Free HDD space 1 GB or higher Connection Software Macintosh ITEM USB interface, Linux Kernel 2.4 or higher Glibc 2.2 or higher CUPS REQUIREMENTS Operating system MacOS X 10.3~10.5 CPU RAM Intel processor Power PC G4/G5 512 MB for an Intel-based Mac, 128 MB for a Power PC based Mac Free HDD space 1 GB Connection USB interface, The window above may slightly differ, if you are reinstalling the driver. View Users Guide: Allows you to view the Users Guide. If your computer does not have Adobe Acrobat, clicking on this button will automatically install Adobe Acrobat Reader for you, and then open the Users Guide. Getting started_ 17 4. Select Typical, and then click Next. 5. After the installation is finished, a window appears asking you to print a test page and to register yourself as a user of Samsung machines in order to receive information from Samsung. If you desire, select the corresponding checkbox(es) and click Finish. If your machine does not work properly after the installation, try to reinstall the printer driver. See Software section. During the printer driver installation process, the driver installer detects the location information for your operating system and sets the default paper size for your machine. If you use a different Windows location, you must change the paper size to match the paper you usually use. Go to printer properties to change the paper size after installation is complete. 18 _Getting started selecting and loading print media This chapter introduces you how to load originals and print media into your machine. This chapter includes:
Selecting print media Loading paper Setting the paper size and type The illustrations of the machine are based on ML-2240 series. ML-1640 series does not have a manual tray. SELECTING PRINT MEDIA You can print on a variety of print media, such as plain paper, envelopes, labels, and transparencies. Always use print media that meet the guidelines for use with your machine. Print media that does not meet the guidelines outlined in this users guide may cause the following problems:
Poor print quality Premature wear on the machine. Properties, such as weight, composition, grain, and moisture content, are important factors that affect the machines performance and the output quality. When you choose print materials, consider the following:
The type, size and weight of the print media for your machine are described later in this section. Increased paper jams Desired outcome: The print media you choose should be appropriate for your project. Brightness: Some print media are whiter than others and produce sharper, more vibrant images. Surface smoothness: The smoothness of the print media affects how crisp the printing looks on the paper. Some print media may meet all of the guidelines in this section and still not produce satisfactory results. This may be the result of improper handling, unacceptable temperature and humidity levels, or other variables over which Samsung has no control. Before purchasing large quantities of print media, ensure that it meets the requirements specified in this users guide. Using print media that does not meet these specifications may cause problems, requiring repairs. Such repairs are not covered by Samsungs warranty or service agreements. Selecting and loading print media_ 19 Specifications on print media TYPE SIZE DIMENSIONS WEIGHTA CAPACITYB 60 to 90 g/m2 (16 to 24 lb bond) for the tray 60~165 g/m2 (16 to 43 lb bond) for manual feeding in the try 150 sheets of 75 g/m2 (20 lb bond) paper for the tray 1 sheet for manual feeding in the tray Letter Legal Folio A4 Oficio JIS B5 ISO B5 216 x 279 mm (8.5 x 11 inches) 216 x 356 mm (8.5 x 14 inches) 216 x 330 mm (8.5 x 13 inches) 210 x 297 mm (8.26 x 11.69 inches) 216 x 343 mm (8.5 x 13.5 inches) 182 x 257 mm (7.16 x 10.11 inches) 176 x 250 mm (6.93 x 9.84 inches) Executive 184 x 267 mm (7.25 x 10.5 inches) Plain paper Envelope A5 A6 Monarch No. 10 DL C5 C6 148 x 210 mm (5.82 x 8.26 inches) 105 x 148 mm (4.13 x 5.82 inches) 98 x 191 mm (3.87 x 7.5 inches) 75 to 90 g/m2 (20 to 24 lb bond) 105 x 241 mm (4.12 x 9.5 inches) 110 x 220 mm (4.33 x 8.66 inches) 162 x 229 mm (6.37 x 9.01 inches) 114 x 162 mm (4.48 x 6.38 inches) Thick paper Labelsc Transparency Card stock Refer to the Plain paper section Letter, A4 Letter, A4 Post card Refer to the Plain paper section 90 to 1 g/m2 (24 to 28 lb bond) Refer to the Plain paper section 120 to 150 g/m2 (32 to 40 lb bond) Refer to the Plain paper section 138 to 146 g/m2 (37 to 39 lb bond) 101.6 x 152.4 mm (4 x 6 inches) 90 to 163 g/m2 (24 to 43 lb bond) Minimum size (custom) Maximum size (custom) 76 x 127 mm (3 x 5 inches) 216 x 356 mm (8.5 x 14 inches) 60 to 165 g/m2 (16 to 43 lb bond) a.If media weight is over 90 g/m2 (24 lb bond), load a paper into the tray one by one. b.Maximum capacity may differ depending on media weight, thickness, and environmental conditions. c. Smoothness: 100 to 250 (sheffield) 20 _Selecting and loading print media 1 sheet for manual feeding in the tray Guidelines for special print media MEDIA TYPE Envelopes GUIDELINES Successful printing on envelopes depends upon the quality of the envelopes. When selecting envelopes, consider the following factors:
- Weight: The weight of the envelope paper should not exceed 90 g/m2 or jamming may occur.
- Construction: Prior to printing, envelopes should lie flat with less than 6 mm curl, and should not contain air.
- Condition: Envelopes should not be wrinkled, nicked, or otherwise damaged.
- Temperature: You should use envelopes that are compatible with the heat and pressure of the machine during operation. Use only well-constructed envelopes with sharp and well creased folds. Do not use stamped envelopes. Do not use envelopes with clasps, snaps, windows, coated lining, self-adhesive seals, or other synthetic materials. Do not use damaged or poorly made envelopes. Be sure the seam at both ends of the envelope extends all the way to the corner of the envelope. Card stock or custom-sized materials Transparencies 1 Acceptable 2 Unacceptable Envelopes with a peel-off adhesive strip or with more than one flap that folds over to seal must use adhesives compatible with the machines fusing temperature for 0.1 second. Check your machines specification to view the fusing temperature, see page 40. The extra flaps and strips might cause wrinkling, creasing, or jams, and may even damage the fuser. For the best print quality, position margins no closer than 15 mm from the edges of the envelope. Avoid printing over the area where the envelopes seams meet. MEDIA TYPE Labels GUIDELINES To avoid damaging the machine, use only labels designed for use in laser machines.
- When selecting labels, consider the following factors:
- Adhesives: The adhesive material should be stable at your machines fusing temperature. Check your machines specification to view the fusing temperature, see page 40.
- Arrangement: Only use labels with no exposed backing between them. Labels can peel off sheets that have spaces between the labels, causing serious jams.
- Curl: Prior to printing, labels must lie flat with no more than 13 mm of curl in any direction.
- Condition: Do not use labels with wrinkles, bubbles, or other indications of separation. Make sure that there is no exposed adhesive material between labels. Exposed areas can cause labels to peel off during printing, which can cause paper jams. Exposed adhesive can also cause damage to machine components. Do not run a sheet of labels through the machine more than once. The adhesive backing is designed for only a single pass through the machine. Do not use labels that are separating from the backing sheet or are wrinkled, bubbled, or otherwise damaged. Do not print on media smaller than 76 mm wide or 127 mm long. In the software application, set margins at least 6.4 mm away from the edges of the material. To avoid damaging the machine, use only transparencies designed for use in laser printers. Transparencies used in the machine must be able to withstand 180 C, the machines fusing temperature. Place them on a flat surface after removing them from the machine. Do not leave them in the paper tray for long periods of time. Dust and dirt may accumulate on them, resulting in spotty printing. To avoid smudging caused by fingerprints, handle them carefully. To avoid fading, do not expose printed transparencies to prolonged sunlight. Ensure that transparencies are not wrinkled, curled, or have any torn edges. Selecting and loading print media_ 21 MEDIA TYPE Preprinted paper GUIDELINES Letterhead must be printed with heat-resistant ink that will not melt, vaporize, or release hazardous emissions when subjected to the machines fusing temperature for 0.1 second. Check your machines specification to view the fusing temperature, see page 40. Letterhead ink must be non-flammable and should not adversely affect printer rollers. Forms and letterhead should be sealed in a moisture-proof wrapping to prevent changes during storage. Before you load preprinted paper, such as forms and letterhead, verify that the ink on the paper is dry. During the fusing process, wet ink can come off preprinted paper, reducing print quality. z Using photographic paper or coated paper may cause problems, requiring repairs. Such repairs are not covered by Samsungs warranty or service agreements. LOADING PAPER Loading paper in the tray Load the print media you use for the majority of your print jobs in the tray. The tray can hold a maximum of 150 sheets of 75 g/m2 (20 lb bond) plain paper. 1. Grasp the paper input tray and pull it toward you to open. Pinch the rear guide and pull it out to extend the tray. Because the machine is very light, it may be moved when you use it;
for example, when opening/closing the tray or installing/removing the toner cartridge. Be careful not to move the machine. 2. Prepare a stack of paper for loading by flexing or fanning them back and forth. Straighten the edges on a level surface. 3. Load paper with the print side facing up. Make sure that all four corners are flat in the tray. 22 _Selecting and loading print media Pay attention not to overload paper. Paper overloading may cause paper jams. 4. Pinch the rear guide to adjust for the paper length and pinch the side guide and slide it to the left flush against the paper. SETTING THE PAPER SIZE AND TYPE After loading paper in the paper tray, you need to set the paper size and type using the printer driver. Follow these steps to make your changes permanent. The following procedure is for Windows XP. For other Windows OS, refer to the corresponding Windows User's Guide or online help. 1. Click the Start button on the computer screen. 2. Select Printers and Faxes. 3. Right-click on the printer driver icon and select Printing Preferences. 4. Click the Paper tab, and change the settings on Paper Options. 5. Click OK. Do not push the width guide far enough to cause the material to warp. If you do not adjust the width guide, it may cause paper jam. 5. If necessary, close the paper cover to keep the paper loaded in the tray from dust. Selecting and loading print media_ 23 basic printing This chapter explains common printing tasks. This chapter includes:
Printing a document PRINTING A DOCUMENT Your machine allows you to print from various Windows, Macintosh, or Linux applications. The exact steps for printing a document may vary depending on the application you use. For details about printing, see the Software secion. Canceling a print job CANCELING A PRINT JOB If the print job is waiting in a print queue or print spooler, such as the printer group in Windows, delete the job as follows:
1. Click the Windows Start menu. 2. For Windows 2000, select Settings and then Printers. For Windows XP/2003, select Printers and Faxes. For Windows Vista, select Control Panel > Hardware and Sound >
Printers. 3. Double-click the Samsung ML-2240 Series icon. 4. From the Document menu, select Cancel. You can also access this window by simply double-clicking the printer icon at the bottom right corner of the Windows desktop. You can also cancel the current job by pressing panel. Cancel on the control 24 _Basic printing maintenance This chapter provides information for maintaining your machine and the toner cartridge. This chapter includes:
Cleaning your machine Maintaining the cartridge Replacing the toner cartridge The illustrations of the machine are based on ML-2240 series. ML-1640 series does not have a manual tray. CLEANING YOUR MACHINE To maintain print quality, follow the cleaning procedures below each time the toner cartridge is replaced or if print quality problems occur. Cleaning the cabinet of the machine with cleaning materials containing large amounts of alcohol, solvent, or other strong substances can discolor or distort the cabinet. If your machine or its surrounding is contaminated with toner, we recommend you to use cloth or tissue dampened with water to clean it. If you use a vacuum cleaner, toner blown into the air may be harmful. Cleaning the outside Clean the cabinet of the machine with a soft lint-free cloth. You can dampen the cloth slightly with water, but be careful not to let any water drip onto or into the machine. Cleaning the inside During the printing process, paper, toner, and dust particles can accumulate inside the machine. This buildup can cause print quality problems, such as toner specks or smearing. Cleaning the inside of the machine clears or reduces these problems. 1. Turn the machine off and unplug the power cord, then wait for the machine to cool down. 2. Open the front cover. 3. Pull the toner cartridge out and remove it from the machine. Because the machine is very light, it may be moved when you use it;
for example, when opening/closing the tray or installing/removing the toner cartridge. Be careful not to move the machine. 4. Remove the manual tray by pulling it out. ML-1640 series does not have a manual tray, go to step 5. Maintenance_ 25 5. With a dry, lint-free cloth, wipe away any dust and spilled toner from the toner cartidge area and the toner cartridge cavity. 7. After inserting the manual tray and the toner cartridge, close the cover. Make sure that the cover is securely closed. If it is not firmly closed, printing errors may occur when you print. If it is not firmly closed, printing errors may occur when you print. 8. Plug in the power cord, and turn the machine on. MAINTAINING THE CARTRIDGE Toner cartridge storage To get the most from the toner cartridge, keep the following guidelines in mind:
Do not remove the toner cartridge from its package until ready for use. Do not refill the toner cartridge. The machine warranty does not cover damage caused by using a refilled cartridge. Store toner cartridges in the same environment as your machine. To prevent damage to the toner cartridge, do not expose it to light for more than a few minutes. To prevent damage to the toner cartridge, do not expose it to light for more than few minute. Cover it with a piece of paper, if necessary. Also, do not touch the black transfer roller inside the machine. 6. Locate the long strip of glass (LSU) inside the top of the cartridge compartment, and gently swab the glass to see if dirt turns the white cotton black. 26 _Maintenance 2. Pull the toner cartridge out and remove it from the machine. Expected cartridge life The life of the toner cartridge yield depends on the amount of toner that print jobs require. The actual number may also be different depending on the print density of the pages you print on, and the number of pages may be affected by operating environment, printing interval, media type, and media size. If you print a lot of graphics, you may need to change the cartridge more often. Redistributing toner When a toner is low, faded or light areas may appear. You can temporarily improve print quality by redistributing the toner. 1. Open the front cover. Avoid reaching too far into the machine. The fusing area may be hot. To prevent damage to the toner cartridge, do not expose it to light for more than few minutes. Do not touch the green surface (or sky blue), the OPC drum, with your hands or any other material. Use the handle on the cartidge to avoid touching this area. Be careful not to expose the green surface (or sky blue), the OPC drum, into light. This will cause damage to the OPC drum. Cover the toner cartridges OPC drum with paper to avoid damaging it from the light. Do not turn the toner cartridge over. Because the machine is very light, it may be moved when you use it;
for example, when opening/closing the tray or installing/removing the toner cartridge. Be careful not to move the machine. 3. Gently shake the toner cartridge from side to side five or six times to redistribute the toner. If toner gets on your clothing, wipe it off with a dry cloth and wash it in cold water. Hot water sets toner into fabric. Maintenance_ 27 4. Reinsert the toner cartridge into the machine. Ensure that the toner cartridge snaps into place. REPLACING THE TONER CARTRIDGE When the status LED lights red, it means the machine cartidge is totally exhausted. Your machine stops printing. Also, the Smart Panel program window appears on the computer telling you to replace the cartridge. At this stage, the toner cartridge needs to be replaced. Check the type of toner cartridge for your machine. (See "Supply" on page 39.) 1. Turn the machine off, then wait a few minutes for the machine to cool. 2. Grasp the front cover and pull it toward you to open. 5. Close the front cover. Make sure that the cover is securely closed. If it is not firmly closed, printing errors may occur when you print. Because the machine is very light, it may be moved when you use it; for example, when opening/closing the tray or installing/
removing the toner cartridge. Be careful not to move the machine. 3. Remove the toner cartridge from its bag and remove the cap protecting the cartridge by pulling the packing tape. Do not touch the green surface (or sky blue), the OPC drum, with your hands or any other material. Use the handle on the cartidge to avoid touching this area. Be careful not to expose the green surface (or sky blue), the OPC drum, into light.This will cause damage to the OPC drum. Cover the toner cartridges OPC drum with paper to avoid damaging it from the light. Do not turn the toner cartridge over. 28 _Maintenance 4. Holding both handles on the toner cartridge, thoroughly rock it from side to side to evenly distribute the toner. 6. Unfold the toner cartridge handle and grasp it. Insert the cartridge in the machine until it snaps into place. If toner gets on your clothing, wipe it off with a dry cloth and wash it in cold water. Hot water sets toner into fabric. Don't use sharp objects, such as a knife or scissors, to open the toner cartridge package. You could damage the surface of the toner cartridge. To prevent damage, do not expose the toner cartridge to light for more than a few minutes. Cover it with a piece of paper to protect it if necessary. 5. Locate the cartridge slots inside the machine, one on each side. Carefully insert or pull out the toner cartridge not to scratch against the machine. Do not touch the green surface (or sky blue), the OPC drum, with your hands or any other material. Use the handle on the cartidge to avoid touching this area. Be careful not to expose the green surface (or sky blue), the OPC drum, into light.This will cause damage to the OPC drum.Cover the toner cartridges OPC drum with paper to avoid damaging it from the light. Do not turn the toner cartridge over. 7. Close the front cover. Make sure that the cover is securely closed. If the cover is not firmly closed, printing errors may occur when you print. Average yield for a new toner cartridge is 1,500 standard pages in accordance with the ISO/IEC 19752 standard. (Average yield for the original toner cartridge supplied with the machine is 700 standard pages.) Maintenance_ 29 troubleshooting This chapter gives helpful information for what to do if you encounter an error. This chapter includes:
Clearing paper jams Tips for avoiding paper jams Solving other problems The illustrations of the machine are based on ML-2240 series. ML-1640 series does not have a manual tray. CLEARING PAPER JAMS In the paper exit area Paper jams in this area may result in loose toner on the page. If you get any toner on your clothes, wash them in cold water as hot water will set the toner into the fabric. 1. If the paper jams as it exits to the output tray and a long portion of the paper is visible, pull the paper straight out. When you pull the jammed paper, if there is resistance and the paper does not move immediately, stop pulling. Continue with the next step. TIPS FOR AVOIDING PAPER JAMS By selecting the correct media types, most paper jams can be avoided. When a paper jam occurs, follow the steps outlined on page 30. Follow the procedures on page 22. Ensure that the adjustable guides are positioned correctly. Do not overload the tray. Ensure that the paper level is below the paper capacity mark on the inside of the tray. Flex, fan, and straighten paper before loading. Do not remove paper from the tray while your machine is printing. Do not use creased, damp, or highly curled paper. Do not mix paper types in a tray. Use only recommended print media. (See "Setting the paper size and Ensure that the recommended side of the print media is facing up in the type" on page 23.) tray. If a paper jam occurs, the error LED on the control panel lights orange. Find and remove the jammed paper. To resume printing after clearing paper jams, you must open and close the front cover. 30 _Troubleshooting 2. Open the top cover and the inner cover. 4. Close the inner cover and the top cover. Printing resumes automatically. When removing the jammed paper, be careful not to touch the heat roller (located underneath the inner cover). It is hot and could cause burns!
The top and inner cover themselves may also be hot due to the heat roller. Allow the machine to cool before opening the covers. 3. Loosen the paper if it is caught in the heat rollers. Then pull the paper gently out. Failed pages will not reprint. Try printing the pages. In the paper feed area 1. Remove any misfeed paper by pulling it out by the visible edge from the tray. Make sure that all of the paper is properly aligned in the tray. 2. Open and close the front or top cover to resume printing the document from failed pages. Troubleshooting_ 31 Around the toner cartridge 1. Open the front cover. 3. Gently pull the paper toward you. 2. Pull the toner cartridge out and remove it from the machine. 4. Check that there is no other paper in the machine. 5. Reinstall the toner cartridge and close the front cover. Your machine resumes printing the document from failed pages. SOLVING OTHER PROBLEMS The following chart lists some conditions that may occur and the recommended solutions. Follow the suggested solutions until the problem is corrected. If the problem persists, call for service. Paper feeding Do not touch the green surface (or sky blue), the OPC drum, with your hands or any other material. Use the handle on the cartidge to avoid touching this area. Be careful not to expose the green surface (or sky blue), the OPC drum, into light.This will cause damage to the OPC drum.Cover the toner cartridges OPC drum with paper to avoid damaging it from the light. Do not turn the toner cartridge over. CONDITION Paper is jammed during printing. Paper sticks together. Multiple sheets of paper do not feed. Paper does not feed into the machine. 32 _Troubleshooting SUGGESTED SOLUTIONS Clear the paper jam. See page 30. Ensure there is not too much paper in the tray. The tray can hold up to 150 sheets of paper, depending on the thickness of your paper. Make sure that you are using the correct type of paper. See page 23. Remove paper from the tray and flex or fan the Humid conditions may cause some paper to paper. stick together. Different types of paper may be stacked in the tray. Load paper of only one type, size, and weight. If multiple sheets have caused a paper jam, clear the paper jam. See page 30. Remove any obstructions from inside the machine. Paper has not been loaded correctly. Remove paper from the tray and reload it correctly. There is too much paper in the tray. Remove excess paper from the tray. The paper is too thick. Use only paper that meets the specifications required by the machine. See page 19. CONDITION SUGGESTED SOLUTIONS The paper keeps jamming. There is too much paper in the tray. Remove excess paper from the tray. If you are printing on special materials, load only one size of print media at a time in the tray. An incorrect type of paper is being used. Use only paper that meets the specifications required by the machine. See page 20. There may be debris inside the machine. Open the front cover and remove the debris. Envelopes skew or fail to feed correctly. Ensure the paper guides are against both sides of the envelopes. Printing problems CONDITION POSSIBLE CAUSE The machine does not print. The machine is not receiving power. SUGGESTED SOLUTIONS Check the power cord connections. Check the power switch and the power source. The machine is not selected as the default printer. Select Samsung ML-2240 Series as your default printer in your Windows. Check the machine for the following:
Paper is jammed. Clear the paper jam. See page The front cover is not closed. Close the cover. 30. No paper is loaded. Load paper. See page 22. The toner cartridge is not installed. Install the toner cartridge. If a system error occurs, contact your service representative. The connection cable between the computer and the machine is not connected properly. The connection cable between the computer and the machine is defective. The port setting is incorrect. Disconnect the printer cable and reconnect it. If possible, attach the cable to another computer that is working properly and print a job. You can also try using a different printer cable. Check the Windows printer setting to make sure that the print job is sent to the correct port. If the computer has more than one port, make sure that the machine is attached to the correct one. The machine may be configured incorrectly. Check the printer properties to ensure that all of the print settings are correct. The printer driver may be incorrectly installed. The machine is malfunctioning. The machine selects print materials from the wrong paper source. The paper source selection in the printer properties may be incorrect. Repair the printer software. See the Software section. Check the LEDs status on the control panel to see if the machine is indicating a system error. For many software applications, the paper source selection is found under the Paper tab within the printer properties. Select the correct paper source. See the printer driver help screen. Troubleshooting_ 33 POSSIBLE CAUSE The oil used to protect the fuser is evaporating. The resolution of the photo is very low. Using damp paper can cause vapor during printing. SUGGESTED SOLUTIONS It is a temporary issue. Reduce the photo size. If you increase the photo size in the software application, the resolution will be reduced. This is not a problem. Just keep printing. CONDITION POSSIBLE CAUSE SUGGESTED SOLUTIONS CONDITION Your machine has an odd smell during initial use. The print quality of photos is not good. Images are not clear. Before printing, the machine emits vapor near the output tray. A print job is extremely slow. The job may be very complex. Reduce the complexity of the page or try adjusting the print quality settings. Half the page is blank. The page orientation setting may be incorrect. Change the page orientation in your application. See the printer driver help screen. The paper size and the paper size settings do not match. The printer cable is loose or defective. The machine prints, but the text is wrong, garbled, or incomplete. The wrong printer driver was selected. The software application is malfunctioning. The operating system is malfunctioning. Pages print, but are blank. The toner cartridge is defective or out of toner. Ensure that the paper size in the printer driver settings matches the paper in the tray. Or, ensure that the paper size in the printer driver settings matches the paper selection in the software application settings you use. Disconnect the printer cable and reconnect. Try a print job that you have already printed successfully. If possible, attach the cable and the machine to another computer and try a print job that you know works. Finally, try a new printer cable. Check the applications printer selection menu to ensure that your machine is selected. Try printing a job from another application. Exit Windows and reboot the computer. Turn the machine off and then back on again. Redistribute the toner, if necessary. See page 27. If necessary, replace the toner cartridge. The file may have blank pages. Check the file to ensure that it does not contain blank pages. Some parts, such as the controller or the board, may be defective. Incompatibility between the PDF file and the Acrobat products. Contact a service representative. Printing the PDF file as an image may solve this problem. Turn on Print As Image from the Acrobat printing options. It will take longer to print when you print a PDF file as an image. The machine does not print PDF file correctly. Some parts of graphics, text, or illustrations are missing. 34 _Troubleshooting Printing quality problems If the inside of the machine is dirty or paper has been loaded improperly, you may notice a reduction in print quality. See the table below to clear the problem. CONDITION White Spots CONDITION Light or faded print Toner specks AaBbCc AaBbCc AaBbCc AaBbCc AaBbCc Dropouts AaBbCc AaBbCc AaBbCc AaBbCc AaBbCc SUGGESTED SOLUTIONS If a vertical white streak or faded area appears on the page:
The toner supply is low. You may be able to temporarily extend the toner cartridge life. See page 28. If this does not improve the print quality, install a new toner cartridge. The paper may not meet paper specifications;
for example, the paper is too moist or too rough. See page 19. If the entire page is light, the print resolution setting is too low. Adjust the print resolution. See the help screen of the printer driver. A combination of faded or smeared defects may indicate that the toner cartridge needs cleaning. The surface of the LSU part inside the machine may be dirty. Clean the LSU by opening and closing the front cover several times and if the problem still occurs call the contact a service representative. The paper may not meet specifications; for example, the paper is too moist or too rough. See page 19. The paper path may need cleaning. See
"Cleaning the inside" on page 25. If faded areas, generally rounded, occur randomly on the page:
A single sheet of paper may be defective. Try reprinting the job. The moisture content of the paper is uneven or the paper has moist spots on its surface. Try a different brand of paper. See page 19. The paper lot is bad. The manufacturing processes can cause some areas to reject toner. Try a different kind or brand of paper. Change the printer option and try again. Go to printer properties, click Paper tab, and set type to Thick Paper. Refer to the Software section for details. If these steps do not correct the problem, contact a service representative. SUGGESTED SOLUTIONS White spots appear on the page:
The paper is too rough and a lot of dirt from the paper falls to the inner devices within the machine, which means the transfer belt may be dirty. Clean the inside of your machine. Contact a service representative. The paper path may need cleaning. Contact a service representative. Vertical lines If white vertical streaks appear on the page:
The surface of the LSU part inside the machine may be dirty. Clean the LSU by opening and closing the front cover several times and if the problem still occurs call the contact a service representative. Black background If the amount of background shading becomes unacceptable:
Change to a lighter weight paper. See page 19. Check the machines environment: very dry
(low humidity) or high humidity (higher than 80% RH) conditions can increase the amount of background shading. Remove the old toner cartridge and install a new one. See page 28. Toner smear Clean the inside of the machine. See page 25. Check the paper type and quality. See page 19. Remove the toner cartridge and install a new one. See page 28. Vertical repetitive defects If marks repeatedly appear on the printed side of the page at even intervals:
The toner cartridge may be damaged. If a repetitive mark occurs on the page, print a cleaning sheet several times to clean the cartridge. After the printout, if you still have the same problems, remove the toner cartridge and install a new one. See page 28. Parts of the machine may have toner on them. If the defects occur on the back of the page, the problem will likely correct itself after a few more pages. The fusing assembly may be damaged. Contact a service representative. Troubleshooting_ 35 A Misformed characters Page skew AaBbCc AaBbCc AaBbCc AaBbCc AaBbCc Curl or wave CONDITION SUGGESTED SOLUTIONS Background scatter Background scatter results from bits of toner randomly distributed on the printed page. The paper may be too damp. Try printing with a different batch of paper. Do not open packages of paper until necessary so that the paper does not absorb too much moisture. If background scatter occurs on an envelope, change the printing layout to avoid printing over areas that have overlapping seams on the reverse side. Printing on seams can cause problems. If background scatter covers the entire surface area of a printed page, adjust the print resolution through your software application or the printer properties. If characters are improperly formed and producing hollow images, the paper stock may be too slick. Try a different paper. See page 19. Ensure that the paper is loaded properly. Check the paper type and quality. See page 19. Ensure that the paper or other material is loaded correctly and the guides are not too tight or too loose against the paper stack. Ensure that the paper is loaded properly. Check the paper type and quality. Both high temperature and humidity can cause paper curl. See page 19. Turn over the stack of paper in the tray. Also try rotating the paper 180 in the tray. Wrinkles or creases Ensure that the paper is loaded properly. Check the paper type and quality. See page 19. Turn over the stack of paper in the tray. Also try rotating the paper 180 in the tray. 36 _Troubleshooting CONDITION Back of printouts are dirty SUGGESTED SOLUTIONS Check for leaking toner. Clean the inside of the machine. See page 25. Black pages A Loose toner Character Voids A Horizontal stripes AaBbCc AaBbCc AaBbCc AaBbCc AaBbCc The toner cartridge may not be installed properly. Remove the cartridge and reinsert it. The toner cartridge may be defective and need replacing. Remove the toner cartridge and install a new one. See page 28. The machine may require repair. Contact a service representative. Clean the inside of the machine. See page 25. Check the paper type and quality. See page 19. Remove the toner cartridge and install a new one. See page 28. If the problem persists, the machine may require repair. Contact a service representative. Character voids are white areas within parts of characters that should be solid black:
If you are using transparencies, try another type of transparency. Because of the composition of transparencies, some character voids are normal. You may be printing on the wrong surface of the paper. Remove the paper and turn it around. The paper may not meet paper specifications. See page 19. If horizontally aligned black streaks or smears appear:
The toner cartridge may be installed improperly. Remove the cartridge and reinsert it. The toner cartridge may be defective. Remove the toner cartridge and install a new one. See page 28. If the problem persists, the machine may require repair. Contact a service representative. CONDITION SUGGESTED SOLUTIONS Curl If the printed paper is curled or paper does not feed into the machine:
Turn over the stack of paper in the tray. Also try rotating the paper 180 in the tray. Change the printer option and try again. Go to printer properties, click Paper tab, and set type to Thin Paper. Refer to the Software section for details. An unknown image repetitively appears on a next few sheets or loose toner, light print, or contamination occurs. Your machine is probably being used at an altitude of 1,000 m (3,281 ft) or above. The high altitude may affect the print quality such as loose toner or light imaging. You can set this option through Paper or Printer tab in printer drivers properties. Common Windows problems CONDITION SUGGESTED SOLUTIONS Exit all software applications. Remove all software from the StartUp Group, then restart Windows. Reinstall the printer driver. Close all other applications, reboot Windows and try printing again. File in Use message appears during installation. General Protection Fault, Exception OE, Spool32, or Illegal Operation messages appear. Fail To Print, A printer timeout error occurred. messages appear. Refer to the Microsoft Windows documentation that came with your computer for further information on Windows error messages. These messages may appear during printing. Just keep waiting until the machine finishes printing. If the message appears in ready mode or after printing has been completed, check the connection and/or whether an error has occurred. I encounter error Unable to open mfp port device file!
when printing a document. Common Linux problems CONDITION SUGGESTED SOLUTIONS The machine does not print. Check if the printer driver is installed in your system. Open Unified Driver Configurator and switch to the Printers tab in Printers configuration window to look at the list of available printers. Make sure that your machine is displayed on the list. If not, please, invoke Add new printer wizard to set up your device. Check if the printer is started. Open Printers configuration and select your machine on the printers list. Look at the description in the Selected printer pane. If its status contains
(stopped) string, please, press the Start button. After that normal operation of the printer should be restored. The "stopped"
status might be activated when some problems in printing occurred. Check if your application has special print option such as -oraw. If -oraw is specified in the command line parameter then remove it to print properly. For Gimp front-end, select print -> Setup printer and edit command line parameter in the command item. The machine does not print whole pages and its output is half page printed. The problem is solved in AFPL Ghostscript v. 8.52 or above. Download the latest version of AFPL Ghostscript from http://sourceforge.net/
projects/ghostscript/ and install it to solve this problem. Please avoid changing print job parameters (via LPR GUI, for example) while a print job is in progress. Known versions of CUPS server break the print job whenever print options are changed and then try to restart the job from the beginning. Since Unified Linux Driver locks mfp port while printing, the abrupt termination of the driver keeps the port locked and therefore unavailable for subsequent print jobs. If this situation occurred, please, try to release the mfp port. Refer to Linux Users Guide that came with your computer for further information on Linux error messages. Troubleshooting_ 37 Common Macintosh problems CONDITION SUGGESTED SOLUTIONS The machine does not print PDF file correctly. Some parts of graphics, text, or illustrations are missing. Incompatibility between the PDF file and the Acrobat products:
Printing the PDF file as an image may solve this problem. Turn on Print As Image from the Acrobat printing options. The document has printed, but the print job has not disappeared from the spooler in Mac OS 10.3.2. Some letters are not displayed normally during the Cover page printing. It will take longer to print when you print a PDF file as an image. Update your Mac OS to OS 10.3.3. or higher. This problem is caused because Mac OS cannot create the font during the Cover page printing. English alphabet and numbers are displayed normally at the Cover page. Refer to Mac OS Users Guide that came with your computer for further information on Mac OS error messages. 38 _Troubleshooting ordering supplies and accessories This chapter provides information on purchasing cartridges and accessories available for your machine. This chapter includes:
Supply Maintenance parts The optional parts or features may differ by countries. Contact your sales representatives whether the part you want is available in your country. SUPPLY When the toner runs out, you can order the following type of toner cartridge for your machine:
TYPE AVERAGE YIELD PART NUMBER MAINTENANCE PARTS To avoid print quality and paper feed problems resulting from worn parts, and to maintain your machine in top working condition the following condition, the following items will need to be replaced after the specified number of pages, or when the life span of each item has expired. Standard yielda toner cartridge Average cartridge yield: 1,500 standard pages Europe region MLT-D1082S Others region MLT-D108S a.Declared yield value in accordance with ISO/IEC 19752. When you purchase a new toner cartridge or supplies, you must purchase them in the same country you have purchased your machine. Otherwise, the toner cartridge or supplies will be incompatible with your machine since the configuration of the toner cartridge or supplies vary depending on the countries. ITEMS YIELD (AVERAGE) Pick-up roller Fuser unit Transfer roller Approx. 50,000 pages Approx. 50,000 pages Approx. 50,000 pages We highly recommend that this maintenance be performed by an authorized service provider, dealer or the retailer where you bought the machine. The warranty does not cover the replacement of the maintenance parts after their lifespan. HOW TO PURCHASE To order Samsung-authorized supplies or accessories, contact your local Samsung dealer or the retailer where you purchased your machine, or visit www.samsungprinter.com and select your country/region to obtain information on calling for technical support. Ordering supplies and accessories_ 39 specifications This chapter guides you about this machines specifications such as various features. This chapter include:
ML-1640 Series specifications ML-2240 Series Specifications ITEM Toner cartridge lifed External dimension
(W x D x H) Weight
(Including consumables) Package weight Duty cycle Fusing temperature DESCRIPTION Average cartridge yield: 1,500 standard pages
(Shipped with 700 pages toner cartridge.) 3 x 3x 2 mm
(1 x 1 x inches)
Kg ( lb) Paper: 5.8 Kg (12.7 lbs) Plastic: 1.8 Kg (3.86 lbs) Up to 5,000 images (Monthly) 8,000 images 180 C (356 F) a.It will be affected by operating system used, computing performance, application software, connecting method, media type, media size and job complexity. b.Visit www.samsungprinter.com to download the latest software version. c. Sound Pressure Level, ISO 7779 d.Declared yield value in accordance with ISO/IEC 19752. The number of pages may be affected by operating environment, printing interval, media type, and media size. ML-1640 SERIES SPECIFICATIONS ITEM Printing method Printing speeda DESCRIPTION Laser beam printing Up to 16 ppm (A4), 17 ppm (Letter) First print out time From ready: Less than 10 seconds From coldboot: Less than 36 seconds Print resolution Printer language OS compatibilityb Max. 1,200 x 600 dpi effective output SPL Windows: 2000/XP/2003/Vista Linux: RedHat 8.0~9.0, Mandrake 9.2~10.1, SuSE 8.2~9.2, Fedra Core 1~4, Ubuntu 6.0 Macintosh: Mac OS 10.3~10.5 Interface Full speed USB 2.0 Tray: 150 sheets for plain paper, 75 g/m2 (20 lb bond) For details about paper input capacity, see 20 page. Face down: 50 sheets 75 g/m2 (20 lb bond) AC 110 - 127 V or AC 220 - 240 V See the Rating label on the machine for the correct voltage, frequency (hertz) and type of current for your machine. Average operating mode: Less than 300 W Ready mode: Less than 70 W Sleep mode: Less than 6W Power off mode: 0W Ready mode: Less than 26 dBA Printing mode: Less than 50 dBA 5 minutes Paper input capacity Paper output capacity Power rating Power consumption Noise Levelc Default time to power save mode from ready mode Warm-up time Less than 35 seconds Operating environment Temperature: 10 to 32.5 C (50 to 90 F) Humidity: 20 to 80% RH 40 _Specifications ML-2240 SERIES SPECIFICATIONS ITEM Printing method Printing speeda DESCRIPTION Laser beam printing Up to 22 ppm (A4), 23 ppm (Letter) First print out time From ready: Less than 10 seconds From coldboot: Less than 25 seconds Print resolution Printer language OS compatibilityb Max. 1,200 x 600 dpi effective output SPL Windows: 2000/XP/2003/Vista Linux: RedHat 8.0~9.0, Mandrake 9.2~10.1, SuSE 8.2~9.2, Fedra Core 1~4, Ubuntu 6.0 Macintosh: Mac OS 10.3~10.5 ITEM Package weight Duty cycle DESCRIPTION Paper: 5.8 Kg (12.7 lbs) Plastic: 1.8 Kg (3.86 lbs) Up to 5,000 images (Monthly) 8,000 images Fusing temperature 180 C (356 F) a.It will be affected by operating system used, computing performance, application software, connecting method, media type, media size and job complexity. b.Visit www.samsungprinter.com to download the latest software version. c. Sound Pressure Level, ISO 7779 d.Declared yield value in accordance with ISO/IEC 19752. The number of pages may be affected by operating environment, printing interval, media type, and media size. Interface Full speed USB 2.0 Tray: 150 sheets for plain paper, 75 g/m2 (20 lb bond) For details about paper input capacity, see 20 page. Face down: 100 sheets 75 g/m2 (20 lb bond) AC 110 - 127 V or AC 220 - 240 V See the Rating label on the machine for the correct voltage, frequency (hertz) and type of current for your machine. Average operating mode: Less than 350 W Ready mode: Less than 70W Sleep mode: Less than 6W Power off mode: 0W Ready mode: Less than 26 dBA Printing mode: Less than 49 dBA 5 minutes Paper input capacity Paper output capacity Power rating Power consumption Noise Levelc Default time to power save mode from ready mode Warm-up time Less than 25 seconds Operating environment Toner cartridge lifed External dimension
(W x D x H) Weight
(Including consumables) Temperature: 10 to 32.5 C (50 to 90 F) Humidity: 20 to 80% RH Average cartridge yield: 1,500 standard pages
(Shipped with 700 pages toner cartridge.) 3 x 3x 2 mm
(1 x 1 x inches)
Kg ( lb) Specifications_ 41 glossary The following glossary helps you get familiar with the product by understanding the terminologies commonly used with printing as well as mentioned in this user's guide. ADF An Automatic Document Feeder (ADF) is a mechanism that will automatically feed an original sheet of paper so that the machine can scan some amount of the paper at once. AppleTalk AppleTalk is a proprietary suite of protocols developed by Apple, Inc for computer networking. It was included in the original Macintosh (1984) and is now deprecated by Apple in favor of TCP/IP networking. BIT Depth A computer graphics term describing the number of bits used to represent the color of a single pixel in a bitmapped image. Higher color depth gives a broader range of distinct colors. As the number of bits increases, the number of possible colors becomes impractically large for a color map. 1-bit color is commonly called as monochrome or black and white. BMP A bitmapped graphics format used internally by the Microsoft Windows graphics subsystem (GDI), and used commonly as a simple graphics file format on that platform. BOOTP Bootstrap Protocol. A network protocol used by a network client to obtain its IP address automatically. This is usually done in the bootstrap process of computers or operating systems running on them. The BOOTP servers assign the IP address from a pool of addresses to each client. BOOTP enables 'diskless workstation' computers to obtain an IP address prior to loading any advanced operating system. CCD Charge Coupled Device (CCD) is a hardware which enables the scan job. CCD Locking mechanism is also used to hold the CCD module to prevent any damage when you move the machine. Collation Collation is a process of printing a multiple-copy job in sets. When collation is selected, the device prints an entire set before printing additional copies. Control Panel A control panel is a flat, typically vertical, area where control or monitoring instruments are displayed. They are typically found in front of the machine. Coverage It is the printing term used for a toner usage measurement on printing. For example, 5% coverage means that an A4 sided paper has about 5%
image or text on it. So, if the paper or original has complicated images or lots of text on it, the coverage will be higher and at the same time, a toner usage will be as much as the coverage. CSV Comma Separated Values (CSV). A type of file format, CSV is used to exchange data between disparate applications. The file format, as it is used in Microsoft Excel, has become a pseudo standard throughout the industry, even among non-Microsoft platforms. 42 _Glossary DADF A Duplex Automatic Document Feeder (DADF) is a mechanism that will automatically feed and flip over an original sheet of paper so that the machine can scan on both sides of the paper. Default The value or setting that is in effect when taking a printer out of its box state, reset, or initialized. DHCP A Dynamic Host Configuration Protocol (DHCP) is a client-server networking protocol. A DHCP server provides configuration parameters specific to the DHCP client host requesting, generally, information required by the client host to participate on an IP network. DHCP also provides a mechanism for allocation of IP addresses to client hosts. DIMM Dual Inline Memory Module (DIMM), a small circuit board that holds memory. DIMM stores all the data within the machine like printing data, received fax data. DNS The Domain Name Server (DNS) is a system that stores information associated with domain names in a distributed database on networks, such as the Internet. Dot Matrix Printer A dot matrix printer refers to a type of computer printer with a print head that runs back and forth on the page and prints by impact, striking an ink-soaked cloth ribbon against the paper, much like a typewriter. DPI Dots Per Inch (DPI) is a measurement of resolution that is used for scanning and printing. Generally, higher DPI results in a higher resolution, more visible detail in the image, and a larger file size. DRPD Distinctive Ring Pattern Detection. Distinctive Ring is a telephone company service which enables a user to use a single telephone line to answer several different telephone numbers. Duplex A mechanism that will automatically flip over a sheet of paper so that the machine can print (or scan) on both sides of the paper. A printer equipped with a Duplex can print double-sided of paper. Duty Cycle Duty cycle is the page quantity which does not affect printer performance for a month. Generally the printer has the lifespan limitation such as pages per year. The lifespan means the average capacity of print-outs, usually within the warranty period. For example, if the duty cycle is 48,000 pages per month assuming 20 working days, a printer limits 2,400 pages a day. ECM Error Correction Mode (ECM) is an optional transmission mode built into Class 1 fax machines or fax modems. It automatically detects and corrects errors in the fax transmission process that are sometimes caused by telephone line noise. Emulation Emulation is a technique of one machine obtaining the same results as another. An emulator duplicates the functions of one system with a different system, so that the second system behaves like the first system. Emulation focuses on exact reproduction of external behavior, which is in contrast to simulation, which concerns an abstract model of the system being simulated, often considering its internal state. Ethernet Ethernet is a frame-based computer networking technology for local area networks (LANs). It defines wiring and signaling for the physical layer, and frame formats and protocols for the media access control
(MAC)/data link layer of the OSI model. Ethernet is mostly standardized as IEEE 802.3. It has become the most widespread LAN technology in use during the 1990s to the present. EtherTalk A suite of protocols developed by Apple Computer for computer networking. It was included in the original Macintosh (1984) and is now deprecated by Apple in favor of TCP/IP networking. FDI Foreign Device Interface (FDI) is a card installed inside the machine to allow a third party device such as a coin operated device or a card reader. Those devices allow the pay-for-print service on your machine. FTP A File Transfer Protocol (FTP) is a commonly used protocol for exchanging files over any network that supports the TCP/IP protocol
(such as the Internet or an intranet). Fuser Unit The part of a laser printer that melts the toner onto the print media. It consists of a hot roller and a back-up roller. After toner is transferred onto the paper, the fuser unit applies heat and pressure to ensure that the toner stays on the paper permanently, which is why paper is warm when it comes out of a laser printer. Gateway A connection between computer networks, or between a computer network and a telephone line. It is very popular, as it is a computer or a network that allows access to another computer or network. Grayscale A shades of gray that represent light and dark portions of an image when color images are converted to grayscale; colors are represented by various shades of gray. Halftone An image type that simulates grayscale by varying the number of dots. Highly colored areas consist of a large number of dots, while lighter areas consist of a smaller number of dots. HDD Hard Disk Drive (HDD), commonly referred to as a hard drive or hard disk, is a non-volatile storage device which stores digitally-encoded data on rapidly rotating platters with magnetic surfaces. IEEE The Institute of Electrical and Electronics Engineers (IEEE) is an international non-profit, professional organization for the advancement of technology related to electricity. IEEE 1284 The 1284 parallel port standard was developed by the Institute of Electrical and Electronics Engineers (IEEE). The term "1284-B" refers to a specific connector type on the end of the parallel cable that attaches to the peripheral (for example, a printer). Intranet A private network that uses Internet Protocols, network connectivity, and possibly the public telecommunication system to securely share part of an organization's information or operations with its employees. Sometimes the term refers only to the most visible service, the internal website. IP address An Internet Protocol (IP) address is a unique number that devices use in order to identify and communicate with each other on a network utilizing the Internet Protocol standard. IPM The Images Per Minute (IPM) is a way of measuring the speed of a printer. An IPM rate indicates the number of single-sided sheets a printer can complete within one minute. IPP The Internet Printing Protocol (IPP) defines a standard protocol for printing as well as managing print jobs, media size, resolution, and so forth. IPP can be used locally or over the Internet to hundreds of printers, and also supports access control, authentication, and encryption, making it a much more capable and secure printing solution than older ones. IPX/SPX IPX/SPX stands for Internet Packet Exchange/Sequenced Packet Exchange. It is a networking protocol used by the Novell NetWare operating systems. IPX and SPX both provide connection services similar to TCP/IP, with the IPX protocol having similarities to IP, and SPX having similarities to TCP. IPX/SPX was primarily designed for local area networks (LANs), and is a very efficient protocol for this purpose (typically its performance exceeds that of TCP/IP on a LAN). ISO The International Organization for Standardization (ISO) is an international standard-setting body composed of representatives from national standards bodies. It produces world-wide industrial and commercial standards. ITU-T The International Telecommunication Union is an international organization established to standardize and regulate international radio and telecommunications. Its main tasks include standardization, allocation of the radio spectrum, and organizing interconnection arrangements between different countries to allow international phone calls. A -T out of ITU-T indicates telecommunication. ITU-T No. 1 chart Standardized test chart published by ITU-T for document facsimile transmissions. JBIG Joint Bi-level Image Experts Group (JBIG) is an image compression standard with no loss of accuracy or quality, which was designed for compression of binary images, particularly for faxes, but can also be used on other images. JPEG Joint Photographic Experts Group (JPEG) is a most commonly used standard method of lossy compression for photographic images. It is the format used for storing and transmitting photographs on the World Wide Web. LDAP The Lightweight Directory Access Protocol (LDAP) is a networking protocol for querying and modifying directory services running over TCP/
IP. Glossary_ 43 LED A Light-Emitting Diode (LED) is a semiconductor device that indicates the status of a machine. MAC address Media Access Control (MAC) address is a unique identifier associated with a network adapter. MAC address is a unique 48-bit identifier usually written as 12 hexadecimal characters grouped in pairs (e. g., 00-00-0c-
34-11-4e). This address is usually hard-coded into a Network Interface Card (NIC) by its manufacturer, and used as an aid for routers trying to locate machines on large networks. MFP Multi Function Peripheral (MFP) is an office machine that includes the following functionality in one physical body, so as to have a printer, a copier, a fax, a scanner and etc. MH Modified Huffman (MH) is a compression method for decreasing the amount of data that needs to be transmitted between the fax machines to transfer the image recommended by ITU-T T.4. MH is a codebook-
based run-length encoding scheme optimized to efficiently compress white space. As most faxes consist mostly of white space, this minimizes the transmission time of most faxes. MMR Modified Modified READ (MMR) is a compression method recommended by ITU-T T.6. Modem A device that modulates a carrier signal to encode digital information, and also demodulates such a carrier signal to decode transmitted information. MR Modified Read (MR) is a compression method recommended by ITU-T T.4. MR encodes the first scanned line using MH. The next line is compared to the first, the differences determined, and then the differences are encoded and transmitted. NetWare A network operating system developed by Novell, Inc. It initially used cooperative multitasking to run various services on a PC, and the network protocols were based on the archetypal Xerox XNS stack. Today NetWare supports TCP/IP as well as IPX/SPX. OPC Organic Photo Conductor (OPC) is a mechanism that makes a virtual image for print using a laser beam emitted from a laser printer, and it is usually green or gray colored and a cylinder shaped. An exposing unit of a drum is slowly worn away by its usage of the printer, and it should be replaced appropriately since it gets scratches from grits of a paper. Originals The first example of something, such as a document, photograph or text, etc, which is copied, reproduced or translated to produce others, but which is not itself copied or derived from something else. OSI Open Systems Interconnection (OSI) is a model developed by the International Organization for Standardization (ISO) for communications. OSI offers a standard, modular approach to network design that divides the required set of complex functions into manageable, self-contained, functional layers. The layers are, from top to bottom, Application, Presentation, Session, Transport, Network, Data Link and Physical. 44 _Glossary PABX A private automatic branch exchange (PABX) is an automatic telephone switching system within a private enterprise. PCL Printer Command Language (PCL) is a Page Description Language
(PDL) developed by HP as a printer protocol and has become an industry standard. Originally developed for early inkjet printers, PCL has been released in varying levels for thermal, matrix printer, and page printers. PDF Portable Document Format (PDF) is a proprietary file format developed by Adobe Systems for representing two dimensional documents in a device independent and resolution independent format. PostScript PostScript (PS) is a page description language and programming language used primarily in the electronic and desktop publishing areas. -
that is run in an interpreter to generate an image. Printer Driver A program used to send commands and transfer data from the computer to the printer. Print Media The media like paper, envelopes, labels, and transparencies which can be used on a printer, a scanner, a fax or, a copier. PPM Pages Per Minute (PPM) is a method of measurement for determining how fast a printer works, meaning the number of pages a printer can produce in one minute. PRN file An interface for a device driver, this allows software to interact with the device driver using standard input/output system calls, which simplifies many tasks. Protocol A convention or standard that controls or enables the connection, communication, and data transfer between two computing endpoints. PS See PostScript. PSTN The Public-Switched Telephone Network (PSTN) is the network of the world's public circuit-switched telephone networks which, on industrial premises, is usually routed through the switchboard. Resolution The sharpness of an image, measured in Dots Per Inch (DPI). The higher the dpi, the greater the resolution. SMB Server Message Block (SMB) is a network protocol mainly applied to share files, printers, serial ports, and miscellaneous communications between nodes on a network. It also provides an authenticated Inter-
process communication mechanism. SMTP Simple Mail Transfer Protocol (SMTP) is the standard for e-mail transmissions across the Internet. SMTP is a relatively simple, text-
based protocol, where one or more recipients of a message are specified, and then the message text is transferred. It is a client-server protocol, where the client transmits an email message to the server. Subnet Mask The subnet mask is used in conjunction with the network address to determine which part of the address is the network address and which part is the host address. TCP/IP The Transmission Control Protocol (TCP) and the Internet Protocol (IP);
the set of communications protocols that implement the protocol stack on which the Internet and most commercial networks run. TCR Transmission Confirmation Report (TCR) provides details of each transmission such as job status, transmission result and number of pages sent. This report can be set to print after each job or only after failed transmissions. TIFF Tagged Image File Format (TIFF) is a variable-resolution bitmapped image format. TIFF describes image data that typically come from scanners. TIFF images make use of tags, keywords defining the characteristics of the image that is included in the file. This flexible and platform-independent format can be used for pictures that have been made by various image processing applications. Toner Cartridge A kind of bottle within a machine like printer which contains toner. Toner is a powder used in laser printers and photocopiers, which forms the text and images on the printed paper. Toner can be melted by the heat of the fuser, causing it to bind to the fibers in the paper. TWAIN An industry standard for scanners and software. By using a TWAIN-
compliant scanner with a TWAIN-compliant program, a scan can be initiated from within the program.; an image capture API for Microsoft Windows and Apple Macintosh operating systems. UNC Path Uniform Naming Convention (UNC) is a standard way to access network shares in Window NT and other Microsoft products. The format of a UNC path is: \\<servername>\<sharename>\<Additional directory>
URL Uniform Resource Locator (URL) is the global address of documents and resources on the Internet. The first part of the address indicates what protocol to use, the second part specifies the IP address or the domain name where the resource is located. USB Universal Serial Bus (USB) is a standard that was developed by the USB Implementers Forum, Inc., to connect computers and peripherals. Unlike the parallel port, USB is designed to concurrently connect a single computer USB port to multiple peripherals. Watermark A watermark is a recognizable image or pattern in paper that appears lighter when viewed by transmitted light. Watermarks were first introduced in Bologna, Italy in 1282; they have been used by papermakers to identify their product, and also on postage stamps, currency, and other government documents to discourage counterfeiting. WIA Windows Imaging Architecture (WIA) is an imaging architecture that is originally introduced in Windows Me and Windows XP. A scan can be initiated from within these operating systems by using a WIA-compliant scanner. Glossary_ 45 S status LED 13 supplies expected toner cartridge life 26 W Windows problems 37 index C Cancel button 13 cleaning inside 25 outside 25 control panel 13 D demo page, print 16 driver installation 17 J jam L LED tips for avoiding paper jams 30 Status 14 Linux problems 37 M Maintenance maintenance parts 39 toner cartridge 26 P paper clearing jam 30 loading in the tray1 22 paper type setting 23 print quality problems, solve 35 printing demo page 16 problem, solve Linux 37 paper feeding 32 printing quality 35 Windows 37 R replacing components toner cartridge 28 46_Index contact SAMSUNG worldwide If you have any comments or questions regarding Samsung products, contact the Samsung customer care center. COUNTRY CUSTOMER CARE CENTER WEB SITE ARGENTINE 0800-333-3733 AUSTRALIA 1300 362 603 www.samsung.com/ar www.samsung.com/au AUSTRIA BELGIUM BRAZIL 0800-SAMSUNG (726-7864) www.samsung.com/at 0032 (0)2 201 24 18 www.samsung.com/be 0800-124-421 4004-0000 www.samsung.com/br CANADA 1-800-SAMSUNG (7267864) www.samsung.com/ca CHILE CHINA 800-726-7864 (SAMSUNG) www.samsung.com/cl 800-810-5858 010- 6475 1880 www.samsung.com.cn COLOMBIA 01-8000-112-112 COSTA RICA 0-800-507-7267 www.samsung.com/co www.samsung.com/latin CZECH REPUBLIC DENMARK ECUADOR 844 000 844 www.samsung.com/cz Distributor pro eskou republiku : Samsung Zrt., eska organizan sloka Vyskoilova 4, 14000 Praha 4 70 70 19 70 www.samsung.com/dk 1-800-10-7267 EL SALVADOR 800-6225 ESTONIA 800-7267 KAZAHSTAN 8-10-800-500-55-500 KYRGYZSTAN 00-800-500-55-500 www.samsung.com/latin www.samsung.com/latin www.samsung.ee www.samsung.kz FINLAND FRANCE GERMANY 030-6227 515 3260 SAMSUNG or 08 25 08 65 65 ( 0,15/min) 01805 - 121213
( 0,14/min) www.samsung.com/fi www.samsung.com/fr www.samsung.de GUATEMALA 1-800-299-0013 HONG KONG 3698 4698 www.samsung.com/latin www.samsung.com/hk HUNGARY 06-80-SAMSUNG (7267864) www.samsung.com/hu INDIA 3030 8282 1800 110011 www.samsung.com/in/
INDONESIA 0800-112-8888 www.samsung.com/id COUNTRY CUSTOMER CARE CENTER WEB SITE ITALIA 800-SAMSUNG(7267864) 800-048989 www.samsung.com/it JAMAICA 1-800-234-7267 www.samsung.com/latin JAPAN LATVIA 0120-327-527 800-7267 LITHUANIA 8-800-77777 www.samsung.com/jp www.samsung.com/lv/
index.htm www.samsung.com/lt LUXEMBURG 0035 (0)2 261 03 710 www.samsung.lu MALAYSIA 1800-88-9999 www.samsung.com/my MEXICO 01-800-SAMSUNG (7267864) www.samsung.com/mx NETHERLANDS 0900 20 200 88 ( 0,10/min) www.samsung.com/nl NEW ZEALAND 0800SAMSUNG(726-7864) www.samsung.com/nz NORWAY PANAMA PHILIPPINES POLAND 815-56 480 800-7267 1800-10-SAMSUNG
(7267864) 0 801 801 881 022-607-93-33 PORTUGAL 80 8 200 128 PUERTO RICO 1-800-682-3180 1-800-751-2676 REP. DOMINICA REPUBLIC OF IRELAND www.samsung.com/no www.samsung.com/latin www.samsung.com/ph www.samsung.com/pl www.samsung.com/pt www.samsung.com/latin www.samsung.com/latin 0818 717 100 www.samsung.com/uk RUSSIA 8-800-555-55-55 www.samsung.ru SINGAPORE 1800-SAMSUNG (7267864) www.samsung.com/sg SLOVAKIA 0800-SAMSUNG (726786) www.samsung.com/sk 0860 726 7864 (SAMSUNG) www.samsung.com/za SOUTH AFRICA SPAIN SWEDEN 902 10 11 30 0771-400 200 SWITZERLAND 0800-7267864 www.samsung.com/es www.samsung.com/se www.samsung.com/ch/
Contact SAMSUNG worldwide_ 47 COUNTRY CUSTOMER CARE CENTER WEB SITE TAIWAN THAILAND TRINIDAD &
TOBAGO 0800-329-999 1800-29-3232 02-689-3232 1-800-7267-864 www.samsung.com/tw www.samsung.com/th www.samsung.com/latin TURKEY 444 77 11 www.samsung.com.tr U.A.E U.K U.S.A. 800-SAMSUNG (7267864) www.samsung.com/mea 0870 SAMSUNG (7267864) www.samsung.com/uk 1-800-SAMSUNG (7267864) www.samsung.com UKRAINE 8-800-502-0000 UZBEKISTAN 8-800-120-0400 VENEZUELA 0-800-100-5303 VIETNAM 1 800 588 889 www.samsung.com/ur www.samsung.com.uz www.samsung.com/latin www.samsung.com/vn 48 _Contact SAMSUNG worldwide 2008 Samsung Electronics Co., Ltd. All rights reserved. This users guide is provided for information purposes only. All information included herein is subject to change without notice. Samsung Electronics is not responsible for any direct or indirect damages, arising from or related to use of this users guide. Samsung and Samsung logo are trademarks of Samsung Electronics Co., Ltd. Microsoft, Windows, and Windows Vista are either registered trademarks or trademarks of Microsoft Corporation. UFST and MicroType are registered trademarks of Monotype Imaging Inc. TrueType, LaserWriter and Macintosh are trademarks of Apple Computer, Inc. All other brand or product names are trademarks of their respective companies or organizations. REV 0.91
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2008-01-18 | JBP - Part 15 Class B Computing Device Peripheral | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2008-01-18
|
||||
1 | Applicant's complete, legal business name |
Samsung Electronics Co Ltd
|
||||
1 | FCC Registration Number (FRN) |
0027908797
|
||||
1 | Physical Address |
19 Chapin Rd., Building D
|
||||
1 |
Pine Brook, New Jersey 07058
|
|||||
1 |
United States
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
r******@pctestlab.com
|
||||
1 | TCB Scope |
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
A3L
|
||||
1 | Equipment Product Code |
ML1640
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
J****** C********
|
||||
1 | Title |
General Manager
|
||||
1 | Telephone Number |
973-8********
|
||||
1 | Fax Number |
973-8********
|
||||
1 |
j******@samsung.com
|
|||||
app s | Technical Contact | |||||
1 | Firm Name |
PCTEST Engineering Lab., Inc.
|
||||
1 | Name |
R******** O********
|
||||
1 | Physical Address |
6660-B Dobbin Road
|
||||
1 |
Columbia, Maryland 21045
|
|||||
1 |
United States
|
|||||
1 | Telephone Number |
410-2********
|
||||
1 | Fax Number |
410-2********
|
||||
1 |
r******@pctestlab.com
|
|||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | JBP - Part 15 Class B Computing Device Peripheral | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Laser Printer | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
Samsung Electronics Co., Ltd. Global CS Center
|
||||
1 | Name |
P**** N******
|
||||
1 | Telephone Number |
82-31********
|
||||
1 | Fax Number |
82-31********
|
||||
1 |
p******@samsung.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15B | 16 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC