all | frequencies |
|
|
|
|
|
|
|
exhibits | applications |
---|---|---|---|---|---|---|---|---|---|---|
manuals | photos | labels |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
user manual | Users Manual | 1.30 MiB | ||||
1 |
|
user manual book -1 | Users Manual | 1.92 MiB | ||||
1 |
|
user manual book -2 | Users Manual | 3.54 MiB | ||||
1 |
|
Internal photos A3LHG40NC670 | Internal Photos | 411.29 KiB | ||||
1 |
|
External Photos | External Photos | 356.79 KiB | ||||
1 |
|
label | ID Label/Location Info | 287.97 KiB | ||||
1 |
|
Label location | ID Label/Location Info | 112.93 KiB | ||||
1 |
|
ACB-Form-FCC-Application-Letters | Cover Letter(s) | 83.61 KiB | ||||
1 | Test Report | |||||||
1 | Test Setup Photos |
1 | user manual | Users Manual | 1.30 MiB |
Warning! Important Safety Instructions
(Please read the appropriate section that corresponds to the marking on your Samsung product before attempting to install the product.) CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). THERE ARE NO USER SERVICEABLE PARTS INSIDE. REFER ALL SERVICING TO QUALIFIED PERSONNEL. This symbol indicates that high voltage is present inside. It is dangerous to make any kind of contact with any internal part of this product. This symbol alerts you that important literature concerning operation and maintenance has been included with this product. The slots and openings in the cabinet and in the back or bottom are provided for necessary ventilation. To ensure reliable operation of this apparatus, and to protect it from overheating, these slots and openings must never be blocked or covered.
- Do not cover the slots and openings with a cloth or other materials.
- Do not block the slots and openings by placing this apparatus on a bed, sofa, rug or other similar surface.
- Do not place this apparatus in a confined space, such as a bookcase, or built-in cabinet, unless proper ventilation is provided. Do not place this apparatus near or over a radiator or heat resistor, or where it is exposed to direct sunlight. Do not place a water containing vessel(vases etc.) on this apparatus, as this can result in a risk of fire or electric shock. Do not expose this apparatus to rain or place it near water(near a bathtub, washbowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool etc.). If this appratus accidentally gets wet, unplug it and contact an authorized dealer immediately. Make sure to pull out the power cord from the outlet before cleaning. This appratus use batteries. In your community there might be regulations that require you to dispose of these batteries properly under environmental considerations. Please contact your local authorities for disposal or recycling information. Do not overload wall outlets, extension cords or adaptors beyond their capacity, since this can result in fire or electric shock. Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plug end, adaptors and the point where they exit from the appliance. To protect this apparatus from a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the set due to lightning and power line surges. Before connecting the AC power cord to the DC adaptor outlet, make sure the voltage designation of the DC adaptor corrsponds to the local electrical supply. Never insert anything metallic into the open parts of this apparatus. Doing so many create a danger of electric shock. To avoid electric shock, never touch the inside of this apparatus. Only a qualified technician should open this apparatus. Make sure to plug the power cord in until it is firmly inserted. When removing the power cord, make sure to hold the power plug when pulling the plug from the outlet. Do not touch the power cord with wet hands. If this appratus does not operate normally - in particular, if there are any unusual sounds or smells coming from it
- unplug it immediately and contact an authorized dealer or service center. Be sure to pull the power plug out of the outlet if the TV is to remain unused or if you are to leave the house for an extended period of time (especially when children, elderly or disabled people will be left alone in the house).
- Accumulated dust can cause an electric shock, an electric leakage or a fire by causing the power cord to generate sparks and heat or the insulation to deteriorate. Be sure to contact an authorized service center, when installing your set in a location with heavy dust, high or low temperatures, high humidity, chemical substances and where it operates for 24 hours such as the airport, the train station etc. Failure to do so may cause serious damage to your set. Use only a properly grounded plug and receptacle.
- An improper ground may cause electric shock or equipment damage. (Class l Equipment only.) To disconnect the apparatus from the mains, the plug must be pulled out from the mains socket, therefore the mains plug shall be readily operable. Do not allow children to hang onto the product. Store the accessories (battery, etc.) in a location safely out of the reach of children. Do not install the product in an unstable location such as a shaky self, a slanted floor or a location exposed to vibration. Do not drop or impart any shock to the product. If the product is damaged, disconnect the power cord and contact a service center. Unplug the power cord from the power outlet and wipe the product using a soft, dry cloth. Do not use any chemicals such as wax, benzene, alcohol, thinners, insecticide, air freshener, lubricant or detergent. This may damage the appearance or erase the printing on the product. Apparatus shall not be exposed to dripping or splashing. Do not dispose of batteries in a fire. Do not short circuit, disassemble or overheat the batteries. Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. WARNING - TO PREVENT THE SPREAD OF FIRE, KEEP CANDLES OR OTHER OPEN FLAMES AWAY FROM THIS PRODUCT AT ALL TIMES.
- English -
Avertissement! Consignes de scurit importantes
(Avant toute installation de votre prod uit Samsung, veuillez lire les sections correspondant aux inscriptions qui figurent sur ce de rnier.) ATTENTION RISQUE D'ELECTROCUTION NE PAS OUVRIR ATTENTION : POUR REDUIRE LES RISQUES D'ELECTROCUTION, NE RETIREZ PAS LE CAPOT (NI LE PANNEAU ARRIERE). A L'INTERIEUR DE L'APPAREIL, AUCUNE PIECE NE PEUT ETRE REPAREE PAR LUTILISATEUR. POUR TOUT DEPANNAGE, ADRESSEZ-VOUS A UN SPECIALISTE. Ce symbole indique qu'une tension leve est prsente l'intrieur de l'appareil. Tout contact avec une pice situe l'intrieur de cet appareil est dangereux. Ce symbole vous prvient qu'une documentation importante relative au fonctionnement et lentretien est fournie avec le produit. Les fentes et les ouvertures mnages dans le botier ainsi qu' larrire et au-dessous de l'appareil assurent la ventilation de ce dernier. Afin de garantir le bon fonctionnement de l'appareil et viter les risques de surchauffe, ces fentes et ouvertures ne doivent tre ni obstrues ni couvertes.
- Ne couvrez pas les fentes et les ouvertures avec un morceau de tissu ou tout autre objet.
- Ne les obstruez pas non plus en plaant lappareil sur un lit, un canap, un tapis ou toute autre surface apparente.
- Ne placez pas lappareil dans un environnement clos tel quune bibliothque ou une armoire encastre, sauf si une ventilation adquate est prvue. Ne placez pas lappareil proximit ou au-dessus dun radiateur ou dune bouche d'air chaud, de mme que dans un endroit expos la lumire directe du soleil. Ne placez aucun rcipient(vases etc.) deau sur lappareil car cela reprsente un risque dincendie ou de dcharge lectrique. Nexposez pas lappareil la pluie et ne le placez pas proximit d'une source d'eau, par exemple une baignoire, un lavabo, un vier, un bac de lavage, un sous-sol humide, une piscine, etc. Si lapp areil vient tre mouill par accident, dbranchez-le et contactez immdiatement un revendeur agr. Assurez-vous que le cordon dalimentation est dbranch avant de nettoyer le produit. Cet appareil peut fonctionner sur piles. Dans un souci de prservation de lenvironnement, la rglementation locale prvoit peut-tre des mesures spcifiques de rcupration des piles usages.Veuillez donc contacter les autorits comptentes afin dobtenir des informations sur la mise au rebut ou le recyclage des piles. Evitez de surcharger les prises murales, les rallonges et les prises mult iples car cela entrane un risque d'incendie ou de dcharge lectrique. Les cordons d'alimentation doivent tre drouls de sorte qu'aucun objet plac sur ou contre eux ne les chevauche ou les pince. Accordez une attention particulire aux cordons au niveau des fiches, des prises et de la sortie de lappareil. En cas d'orage, ou bien lorsque vous vous absentez ou n'utilisez pas votre appareil pendant une longue priode, dbranchez celui-ci de la prise murale et dbranchez galement le cble dantenne ou le cordon de connexion au rseau cbl. Ces prcautions viteront que lappareil ne soit endommag par la foudre ou par des surtensions. Avant de raccorder le cordon dalimentation CA la prise de ladaptateur CC, vrifiez que la tension indique sur ce dernier correspond bien la tension dlivre par le rseau lectrique local. Ninsrez aucun objet mtallique dans les ouvertures de lappareil. vous risqueriez de recevoir une dcharge lectrique. Afin dviter tout risque d'lectrocution, ne mettez jamais les doigts lintrieur de lappareil. Seul un technicien qualifi est habilit ouvrir le botier de lappareil. Assurez-vous de bien brancher le cordon d'alimentation. Assurez-vous de bien tenir la prise en main lorsque vous la dbranchez. Ne touchez en aucune circonstance le cordon d'alimentation avec les mains mouilles. Si lappareil ne fonction ne pas normalement, en particulier sil met des odeurs oudes sons anormaux, dbranchez-le immdiatement et contactez un revendeur ou un centre de dpannage agr. Veillez bien dbrancher le cordon d'alimentation si la tlvision doit reste inutilise, ou lorsque vous quittez votre domicile, pendant une priode assez longue (et plus spcialement si des enfants, des personnes ges ou des majeurs incapables doivent rester seul votre domicile).
- L'accumulation de poussires peut provoquer une lectrocution, une perte d'nergie, ou un incendie induit par le cordon d'alimentation, d des variations de tension, une surchauffe ou une dtrioration de l'isolation. Veillez contacter un centre de services homologu lorsque vous installez votre tlviseur dans un endroit trs poussireux, humide, expos des tempratures leves ou faibles ou des produits chimiques, ou sil fonctionne sans interruption, par exemple dans les aroports, les gares, etc. Si vous ne le faites pas, vous risquez dendommager gravement votre tlviseur. Utiliser uniquement des prises correctement relies la terre.
- Un sol inadapt peut causer un choc lectrique ou un incendie. (Appareils de CLASSE l uniquement.) Pour dconnecter l'appareil du secteur, la prise doit tre dbranche de la prise lectrique du secteur. Par consquent, la prise du secteur doit tre en tat de marche. Utiliser uniquement des prises correctement relies la terre. Rangez les accessoires (batterie, etc.) dans un endroit sr, hors de la porte des enfants. N'installez pas le produit sur une surface instable telle quune tagre chancelante, un sol non horizontal ou un endroit soumis des vibrations. Ne faites ni tomber, ni subir de choc au produit. Si le produit est endommag, dconnectez le cordon d'alimentation et contactez un centre de services. Dbranchez le cordon dalimentation de la prise secteur et essuyez le produit laide dun chiffon doux et sec. Nutilisez pas de produit chimique, tels que de la cire, du benzne, de lalcool, du diluant, de linsecticide, du dsodorisant, du lubrifiant ou du dtergent. Cela peut endommager l'aspect ou effacer l'impression sur l'appareil. Lappareil ne doit pas tre expos lhumidit ni aux claboussures. Ne jetez pas les batteries au feu. Ne court-circuitez pas ni ne dsassemblez les batteries et ne les soumettez pas une chaleur excessive. Un risque dexplosion survient si la batterie est replace de manire incorrecte. Ne la remplacez qu'avec une batterie du mme type. AVERTISSEMENT - POUR VITER TOUT RISQUE D'INCENDIE, VEILLEZ GARDER CE PRODUIT LOIN DE BOUGIES OU D'AUTRES SOURCES DE FEU.
- Franais -
Advertencia! Instrucciones importantes de seguridad
(Lea la seccin apropiada que corresponde a la marca del producto Samsung antes de intentar instalar el producto.) PRECAUCIN PELIGRO DE DESCARGA ELCTRICA. NO ABRIR PRECAUCIN:PARA REDUCIR EL PELIGRO DE DESCARGA ELCTRICA, NO RETIRE LA CUBIERTA. NO HAY PIEZAS EN EL INTERIOR QUE PUEDA REPARAR EL USUARIO. CONSULTE AL PERSONAL CUALIFICADO DE SERVICIO TCNICO. Este smbolo indica la presencia de alto voltaje en el interior. Es peligroso entrar en contacto con cual-
quier pieza interior de este producto. Este smbolo le alerta de que con este producto se incluye documentacin importante correspondiente al funcionamiento y mantenimiento. Las ranuras y aberturas existentes en la unidad y en la parte trasera o inferior se facilitan para proporcionar la ventilacin necesaria. Para garantizar el funcionamiento fiable de este aparato, y para protegerlo frente a sobrecalentamiento, estas ranuras y aberturas nunca deben bloquearse ni cubrirse.
- No cubra las ranuras y aberturas con un pao o con cualquier otro material.
- No bloquee las ranuras ni aberturas colocando este aparato sobre la cama, sof, alfombra o superficie similar.
- No coloque este aparato en un espacio cerrado, como una librera, o un armario empotrado, a menos que se proporcione una ventilacin correcta. No coloque este aparato cerca o sobre un radiador o una rejilla de aire caliente, o en lugares expuestos a luz solar directa. No coloque recipientes con agua sobre este aparato(jarros, etc.), ya que podra representar riesgo de incendio o descarga elctrica. No exponga este aparato a la lluvia ni lo coloque cerca de agua (cerca de una baera, lavabo, fregadero o lavadero, en un stano hmedo ni cerca de una piscina o similar). Si este aparato accidentalmente se moja, desenchfelo y pngase en contacto inmediatamente con un autorizado. Antes de limpiar el producto desconecte el cable de alimentacin de la toma de corriente. Este aparato utiliza bateras. En su comunidad puede que existan normativas que requieran la disposicin de estas bateras de forma adecuada bajo consideraciones ambientales. Pngase en contacto con las autoridades locales para obtener informacin sobre desecho y reciclaje. No sobrecargue las tomas murales, los alargadores ni los receptculos correspondientes por encima de su capacidad, ya que esto puede generar incendios o descargas elctricas. Los cables de alimentacin y proteccin deben colocarse de forma que no puedan pisarse ni quedar atrapados por objetos encima o contra ellos, poniendo especial atencin en los cables cerca del enchufe, los receptculos de los electrodomsticos y el punto en el que salen del aparato. Para proteger este aparato durante una tormenta elctrica o cuando no lo utilice durante largos periodos de tiempo, desenchfelo de la toma de la pared y desconecte la antena o el cable del sistema. Esto evitar que el equipo se dae por rayos o picos de tensin de la lnea elctrica. Antes de conectar el cable de alimentacin de CA a la toma del adaptador de CC, asegrese de que la designacin del voltaje del adaptador de CC corresponde a la fuente elctrica local. Nunca inserte nada metlico en las aberturas del aparato. Hacerlo as puede crear peligros de descarga elctrica. Para evitar descarga elctrica, no toque nunca el interior de este aparato. Slo un tcnico cualificado debe abrir el alojamiento del aparato. Cuando conecte el cable de alimentacin compruebe que el enchufe est firmemente insertado. Para desenchufar el cable de alimentacin, sujtelo por el enchufe y tire de ste para sacarlo de la toma de corriente. Nunca toque el cable de alimentacin con las manos mojadas. Si este aparato no funciona normalmente, en concreto, si emite sonidos extraos o desprende olores desde el interior, desenchfelo inmediatamente y pngase en contacto con el distribuidor autorizado o el centro de servicio tcnico. Asegrese de desconectar el enchufe de alimentacin de la toma de corriente si la TV ha dejado de utilizarse, o desea salir de casa, durante un largo perodo de tiempo (especialmente cuando sea necesario dejar solos en casa a nios, ancianos o personas incapacitadas).
- El polvo acumulado puede provocar una descarga elctrica, un cortocircuito o un fuego, haciendo que el cable elctrico genere chispas y calor, o deteriorando la funda protectora. Pngase en contacto con un centro de servicio tcnico autorizado cuando instale el aparato en un lugar expuesto a gran cantidad de polvo, temperaturas extremas, alto nivel de humedad y productos qumicos, y en lugares donde se vaya a utilizar las 24 del da, como aeropuertos, estaciones, etc. El incumplimiento de estas indicaciones puede causar serios desperfectos en el aparato. Cuando instale el equipo, procure guardar una distancia de ms de 10 cm desde la pared para facilitar la ventilacin. Use slamente conectores y receptculos apropiados para hacer la conexin a tierra.
- Una conexin a tierra inapropiada podra causar una descarga elctrica o una avera en el equipo. (Slo equipo de Clase l.) Para desconectar el aparato de la corriente, debe desenchufar el cable de la toma principal, por lo que el enchufe principal debe estar siempre fcilmente accesible. No permita que los nios jueguen con el producto. Guarde los accesorios (pilas, etc.) en un lugar seguro fuera del alcance de los nios. No coloque el producto en un lugar inestable, inclinado o expuesto a vibraciones. No lo deje caer ni le d golpes. Si el producto se estropea, desenchufe el cable de alimentacin y pngase en contacto con un centro de servicio. Desconecte el cable de alimentacin de la toma de corriente y seque el aparato con un pao suave y seco. No utilice ningn producto qumico como cera, benzol, alcohol, disolventes, insecticida, ambientador de aire, lubricante o detergente. Se puede daar el aspecto o borrar las estampaciones del producto. Evite que cualquier lquido salpique el aparato o gotee sobre l. No tire las pilas al fuego. No cortocircuite, desmonte ni sobrecaliente las pilas. Si la pila no se coloca correctamente se corre el riesgo de una explosin. Reemplace la pila slo por una igual o de especificaciones equivalentes. ADVERTENCIA - PARA IMPEDIR QUE EL FUEGO SE PROPAGUE, MANTENGA LAS VELAS U OTRAS LLAMAS EXPUESTAS SIEMPRE ALEJADAS DE ESTE PRODUCTO.
- Espaol -
Warnung! Wichtige Sicherheitshinweise
(Bitte lesen Sie den Ihrem Samsung Gert entsprechenden Abschnitt, bevor Sie dieses installieren.) ACHTUNG STROMSCHLAGGEFAHR NICHT FFNEN ACHTUNG: ABDECKUNG ODER RCKWAND NICHT FFNEN!
STROMSCHLAGGEFAHR! IM GERTEINNEREN BEFINDEN SICH KEINE VOM BENUTZER ZU WARTENDEN TEILE. LASSEN SIE REPARATUREN NUR VON QUALIFIZIERTEM KUNDENDIENSTPERSONAL DURCHFHREN. Dieses Symbol weist auf eine hohe Spannung im Inneren des Gerts hin. Das Berhren von Teilen im Gerteinneren ist gefhrlich. Dieses Symbol weist darauf hin, dass diesem Gert wichtige Anweisungen zu Betrieb und Wartung beigefgt sind. Die Schlitze und ffnungen im Gehuse und in der Rckwand oder im Boden sind fr die Belftung erforderlich. Um den zuverlssigen Betrieb des Gerts zu gewhrleisten und es vor berhitzung zu schtzen, drfen diese ffnungen keinesfalls blockiert oder bedeckt werden.
- Bedecken Sie die Schlitze und ffnungen nicht mit einem Tuch oder anderen Materialien.
- Schlitze und ffnungen drfen keinesfalls blockiert werden, indem das Gert auf ein Bett, Sofa, einen Teppich oder eine hnliche Oberflche gestellt wird.
- Stellen Sie das Gert nicht in abgeschlossene Rume wie z. B. in ein Bcherregal oder einen Einbauschrank. Dieser Einbau ist nur dann zulssig, wenn fr ausreichende Belftung gesorgt wird. Auerdem darf das Gert keinesfalls in der Nhe oder ber einem Radiator oder Heizkrper aufgestellt werden, oder an Orten, an denen es direkter Sonneneinstrahlung ausgesetzt ist. Stellen Sie keine mit Flssigkeit gefllte Behlter auf das Gert (Vasen usw.), da dies zu einem Brand oder Stromschlag fhren kann. Setzen Sie das Gert keinesfalls Regen aus und stellen Sie es nicht in der Nhe von Wasser auf (Badewanne, Kchensple, feuchter Keller, Schwimmbecken usw). Falls das Gert dennoch Nsse ausgesetzt wurde, trennen Sie es von der Stromversorgung und wenden Sie sich umgehend an Ihren rtlichen Vertreter. Ziehen Sie vor dem Reinigen des Gerts den Netzstecker aus der Steckdose. Fr dieses Gert bentigen Sie Batterien. Entsorgen Sie die Batterien gem den regionalen Umweltschutzbestimmungen. berlasten Sie Steckdosen, Verlngerungskabel und Mehrfachstecker keinesfalls, da dies zu einem Brand oder Stromschlag fhren kann. Netzkabel mssen so verlegt werden, dass niemand auf das Kabel treten kann oder es durch Gegenstnde gequetscht wird, die auf dem Kabel stehen oder gegen das Kabel drcken. Besondere Aufmerksamkeit muss den Bereichen um Stecker, Steckdosen und dem Punkt zukommen, an dem das Netzkabel aus dem Gert herausgefhrt wird. Zum Schutz des Gerts bei einem Gewitter oder lngerem Nichtbetrieb trennen Sie das Gert vom Netz. Trennen Sie darber hinaus das Antennenkabel vom Gert. Auf diese Weise werden Schden durch Blitzschlag oder Spannungsste vermieden. Stellen Sie sicher, dass die Nennspannung des Netzteils fr die rtliche Stromversorgung geeignet ist, bevor Sie das Netzkabel an die Stromversorgung anschlieen. Stecken Sie keinesfalls metallische Gegenstnde in die ffnungen des Gerts. Dies kann zu Stromschlgen fhren. Berhren Sie keinesfalls Bauteile im Gerteinneren, um Stromschlge zu vermeiden. Das Gert darf nur von einem qualifizierten Techniker geffnet werden. Stellen Sie sicher, dass das Netzkabel fest in die Steckdose eingestpselt wird. Fassen Sie das Netzkabel am Stecker an, wenn Sie es aus der Wandsteckdose ziehen. Berhren Sie das Netzkabel niemals mit feuchten Hnden. Wenn das Gert nicht einwandfrei funktioniert, insbesondere beim Auftreten ungewhnlicher Gerusche oder Gerche aus dem Inneren, trennen Sie es unverzglich von der Stromversorgung und wenden Sie sich umgehend an Ihren rtlichen Vertreter. Achten Sie darauf, dass der Netzstecker gezogen wird, wenn das Fernsehgert nicht benutzt werden soll oder Sie lngere Zeit abwesend sind (besonders wenn Kinder, ltere oder behinderte Menschen allein im Haus gelassen werden).
- Angesammelter Staub kann bei Funkenund Hitzebildung oder Beschdigung der Isolation einen Stromschlag, elektrischen Kriechstrom oder einen Brand verursachen. Wenden Sie sich an den autorisierten Kundendienst, wenn das Gert an einem Ort mit hoher Konzentration an Staubpartikeln, auergewhnlich hoher oder geringer Raumtemperatur, extrem hoher Luftfeuchtigkeit, in unmittelbarer Nhe zu chemischen Lsungsmitteln oder fr den Dauerbetrieb, z.B. auf Bahn- oder Flughfen, aufgestellt werden soll. Eine nicht fachgerechte Aufstellung kann zu schweren Schden am Gert fhren. Benutzen Sie nur einwandfrei geerdete Netzstecker und Steckdosen.
- Unsachgeme Erdung knnte zu elektrischem Schlag oder Beschdigung der Gerte fhren. (Nur Gerte der Klasse I) Wenn Sie das Gert vom Stromnetz trennen mchten, mssen Sie den Netzstecker aus der Dose ziehen. Deshalb muss der Netzstecker jederzeit leicht erreichbar sein. Achten Sie darauf, dass sich Kinder nicht an das Gert hngen. Lagern Sie die Zubehrteile (Akku usw.) an einem sicheren Ort auerhalb der Reichweite von Kindern. Bringen Sie das Gert nicht an einem instabilen Ort wie z. B. einem wackligen Regal, einem abschssigen Boden oder einem Ort, der Vibrationen ausgesetzt ist, an. Lassen Sie das Gert nicht fallen, und vermeiden Sie Erschtterungen. Wenn das Gert beschdigt ist, trennen Sie es vom Stromnetz, und wenden Sie sich an ein Kundendienstzentrum. Ziehen Sie den Netzstecker aus der Steckdose, und wischen Sie das Gert mit einem weichen, trockenen Tuch ab. Verwenden Sie keine Chemikalien wie Wachs, Benzol, Alkohol, Verdnner, Insektizide, Luftverbesserer, Schmiermittel oder Reinigungsmittel. Hierdurch kann das Aussehen des Gerts beschdigt oder der Aufdruck gelscht werden. Es drfen keinesfalls Flssigkeitstropfen oder spritzer in das Gert eindringen. Entsorgen Sie Batterien niemals in einem Feuer. Schlieen Sie die Batterie nicht kurz, zerlegen und berhitzen Sie sie nicht. Explosionsgefahr bei unsachgemem Ersetzen von Batterien. Setzen Sie nur Batterien des gleichen oder eines gleichwertigen Typs ein. ACHTUNG - UM DIE AUSBREITUNG VON FEUER ZU VERHINDERN, SORGEN SIE DAFR, DASS DAS GERT NIEMALS MIT KERZEN ODER OFFENEM FEUER IN BERHRUNG KOMMT.
- Deutsch -
Aviso! Instrues de segurana importantes
(Leia a seco adequada que corresponde marca no produto Samsung antes de tentar instalar o produto.) ATENO STROMSCHLAGGEFAHR NICHT FFNEN CUIDADO:PARA REDUZIR O RISCO DE CHOQUE ELCTRICO, NO RETIRE A TAMPA (NEM A PARTE TRASEIRA). NO INTERIOR DO TELEVISOR NO EXISTEM PEAS QUE POSSAM SER REPARADAS PELOUTILIZADOR. A ASSISTNCIA S PODE SER EFECTUADA POR TCNICOS QUALIFICADOS. Este smbolo indica a existncia de alta tenso no interior do televisor. perigoso tocar em qualquer parte no interior do produto. Este smbolo informa-o de que este produto inclui literaturaimportante sobre o respectivo funcionamento e manuteno. As ranhuras e aberturas na caixa e na parte posterior ou inferior permitem a ventilao necessria. Para garantir o funcionamento correcto do aparelho e para o proteger do sobreaquecimento, nunca deve bloquear ou tapar estas ranhuras e aberturas.
- No tape as ranhuras e aberturas com panos ou outros materiais.
- No bloqueie as ranhuras e aberturas colocando o aparelho numa cama, sof, tapete ou outra superfcie semelhante.
- No coloque este aparelho num espao fechado, como uma estante ou um armrio embutido, a menos que tenha ventilao adequada. No coloque este aparelho perto ou por cima de um radiador, sistema de aquecimento ou num local em que esteja exposto incidncia directa dos raios solares. No coloque recipientes com gua em cima do aparelho(jarras etc.), porque pode provocar um incndio ou choque elctrico. No exponha o aparelho chuva nem coloque em locais perto de gua (perto de uma banheira, lavatrio, lava-loia, tubo da mquina de lavar a loia, piscina ou numa cave com humidade). Se molhar acidentalmente o aparelho, desligue-o da ficha e contacte de imediato o revendedor autorizado. Retire sempre o cabo de alimentao da tomada antes de limpar o produto. Este aparelho tem pilhas. Deite fora as pilhas adequadamente de acordo com as consideraes ambientais existentes no seu pas. Contacte as autoridades locais para obter informaes sobre a destruio ou reciclagem de pilhas. No sobrecarregue tomadas de parede, extenses nem receptculos, porque pode provocar um incndio ou choque elctrico. Deve colocar os cabos de alimentao de forma a no serem pisados nem entalados por objectos, tendo em especial ateno os cabos ligados a fichas, a receptculos e ao ponto de onde os cabos saem do aparelho. Para proteger o aparelho de trovoadas, ou quando no for utiliz-lo durante longos perodos de tempo, desligue o aparelho da tomada de parede e desligue a antena ou o sistema de televiso por cabo. Deste modo, o aparelho no sofre eventuais danos provocados por raios e descargas em cabos de alta tenso. Antes de ligar o cabo de alimentao de CA tomada do transformador de CC, certifique-se de que a designao de tenso do transformador de CC corresponde alimentao elctrica local. Nunca introduza objectos metlicos nas aberturas do aparelho. Se o fizer, pode provocar choques elctricos. Para evitar choques elctricos, nunca toque no interior do aparelho. A caixa do aparelho s deve ser aberta por tcnicos qualificados. Introduza o cabo de alimentao completamente at ao fim. Quando retirar o cabo de alimentao, certifique-se de que o segura pela ficha quando puxar a mesma da tomada. No toque no cabo de alimentao com as mos molhadas. Se o aparelho no funcionar normalmente - em particular, se o aparelho emitir rudos ou cheiros invulgares desligue o aparelho de imediato e contacte o revendedor autorizado ou centro de assistncia tcnica. Certifique-se de que retira a ficha de alimentao da tomada se o aparelho de televiso no for utilizado ou se o utilizador no estiver em casa durante um perodo de tempo longo (especialmente quando crianas, idosos ou pessoas com deficincias forem deixadas sozinhas em casa).
- Poeira acumulada pode provocar um choque elctrico, uma fuga elctrica ou um incndio, fazendo com que o fio de alimentao produza fascas e aquea ou deteriore o isolamento. Contacte um centro autorizado de assistncia tcnica quando instalar o produto em locais sujeitos a poeiras excessivas, locais sujeitos a temperaturas altas ou baixas, locais com muita humidade, locais onde se utilizem substncias qumicas e locais onde o monitor esteja a funcionar 24 horas por dia como em aeroportos, estaes de comboio, etc. Se no o fizer, pode provocar srios danos no produto. Utilize uma ficha e uma tomada devidamente ligadas terra.
- Uma ligao de terra deficiente pode causar choque elctrico ou danos no equipamento. (S equipamento de classe 1.) Deve puxar a ficha da tomada para desligar o aparelho da corrente, de forma a deixar a ficha pronta a ser utilizada. No deixe as crianas mexer no produto. Guarde os acessrios (bateria, etc.) num local seguro fora do alcance das crianas. No instale o produto num local instvel, como uma prateleira inclinada, um cho desnivelado ou um local exposto vibrao. No deixe cair ou provoque qualquer embate no produto. Se o produto estiver danificado, desligue o cabo de alimentao e contacte um centro de assistncia. Desligue o cabo de alimentao da tomada e utilize um pano seco e macio para limpar o produto. No utilize quaisquer produtos qumicos como cera, benzina, lcool, diluentes, insecticida, ambientador, lubrificante ou detergente. Tal pode danificar o aspecto do produto ou eliminar a impresso do mesmo. No deixe cair gotas ou salpicos em cima do aparelho. No destrua as pilhas atravs de fogo. No provoque curto-circuito, nem desfaa ou sobreaquea as pilhas. Existe perigo de exploso se a pilha for substituda incorrectamente. Substitua-a apenas pelo mesmo tipo de pilha ou por uma equivalente. AVISO - PARA EVITAR O ALASTRAR DE UM INCNDIO, MANTENHA SEMPRE AS VELAS OU OUTRO TIPO DE CHAMA LONGE DESTE PRODUTO.
- Portugus -
Avviso! Importanti istruzioni per la sicurezza
(Prima di installare il prodotto, leggere la sezione che si riferisce al marchio presente sul vostro dispositivo Samsung.) ATTENZIONE RISCHIO DI SCARICHE ELETTRICHE NON APRIRE ATTENZIONE:PER EVITARE IL RISCHIO DI SCOSSE ELETTRICHE, NON RIMUOVERE IL COPERCHIO (O IL PANNELLO POSTERIORE). ALL'INTERNO NON PRESENTE ALCUNA PARTE RIPARABILE DALL'UTENTE.IN CASO DI RIPARAZIONI RIVOLGERSI A PERSONALE QUALIFICATO. Questo simbolo indica la presenza di alta tensione all'interno. pericoloso toccare qualunque parte interna del prodotto. Questo simbolo informa che al prodotto allegata della documentazione importante relativa al funzionamento e alla manutenzione. Le fessure e le aperture presenti sul telaio o nelle parti posteriore e inferiore garantiscono una ventilazione adeguata. Per assicurare il funzionamento corretto del prodotto e proteggerlo dal surriscaldamento, le fessure e le aperture non devono mai essere bloccate o coperte.
- Non coprire le fessure e le aperture con un panno o altri materiali.
- Non bloccare le fessure e le aperture posizionando il dispositivo sul letto, sul divano, su una coperta o su superfici analoghe.
- Non posizionare il dispositivo in uno spazio ristretto, quale ad esempio una libreria o un telaio incorporato, senza una ventilazione adeguata. Non posizionare il dispositivo vicino o sopra un radiatore o una valvola di regolazione del calore, n esporlo alla luce diretta del sole. Non posizionare sul dispositivo recipienti pieni d'acqua per evitare il rischio di incendio o scosse elettriche (vasi, ecc...). Non esporre il dispositivo alla pioggia n posizionarlo in luoghi con presenza di acqua (vasca da bagno, bacinella, lavello o lavatoio, pavimento bagnato, nei pressi di una piscina o in presenza di altre situazioni analoghe.). Se il dispositivo entra accidentalmente in contatto con lacqua, scollegarlo e contattare immediatamente un rivenditore autorizzato. Estrarre il cavo di alimentazione dalla presa prima di eseguire la pulizia del prodotto. Questo dispositivo utilizza delle batterie. Il paese in cui si utilizza questo dispositivo potrebbe avere delle normative in materia di smaltimento delle batterie per la salvaguardia dellambiente. Contattare le autorit locali per ottenere informazioni in merito a smaltimento e riciclaggio. Non sovraccaricare la presa a parete, i cavi di prolunga o le altre prese utilizzate per non incorrere nel pericolo di incendio o scosse elettriche. I cavi di alimentazione devono essere posizionati in modo da non essere calpestati o schiacciati da oggetti collocati sopra o contro di essi, prestando particolare attenzione ai cavi in prossimit delle spine, delle prese uti lizzate e del punto in cui escono dall'unit. Per proteggere il dispositivo durante un temporale, o quando viene lasciato incustodito e inutilizzato per lunghi periodi di tempo, staccarlo dalla presa a parete e scollegare lantenna o il sistema via cavo. Si evitano in questo modo danni all'unit provocati da fulmini o da picchi di corrente. Prima di collegare il cavo di alimentazione CA alluscita delladattatore CC, accertarsi che lindicazione di volt aggio presente sulladattatore corrisponda al tipo di alimentazione elettrica locale. Non inserire alcuna parte metallica nelle aperture del dispositivo. Ci pu generare pericolo di scosse elettriche. Per evitare la formazione di scosse elettriche, non toccare mai le parti interne del dispositivo. Il telaio del dispositivo deve essere aperto solo da un tecnico qualificato. Inserire saldamente il cavo di alimentazione. Quando si scollega il cavo di alimentazione, tenere la spina per estrarla dalla presa. Non toccare il cavo di alimentazione con le mani bagnate. Se il dispositivo non funziona correttamente, in particolare se si avverte la presenza di rumori o odori insoliti, scollegarlo immediatamente e contattare un rivenditore autorizzato o il centro di assistenza tecnica. Accertarsi di scollegare dalla presa di alimentazione la spina nel caso in cui la TV debba rimanere inutilizzata oppure si debba lasciare la casa per un periodo di tempo prolungato (in particolar modo quando ci sono bambini, anziani o persone disabili sole in casa).
- L'accumulo di polvere pu causare scosse elettriche, una dispersione elettrica o un incendio, provocando la generazione di calore e scintille dal cavo di alimentazione e il deteriorasi dell'isolamento. Contattare il centro di assistenza autorizzato quando si installa il dispositivo in una posizione che presenta polvere eccessiva, temperature alte o basse, elevata umidit, sostanze chimiche o nel caso in cui l'unit sar in funzione 24 ore al giorno, come negli aeroporti, nelle stazioni ferroviarie ecc. La mancata osservanza di questa precauzione pu causare gravi danni al dispositivo. Usare solo una spina e una presa opportunamente collegata a massa.
- Una massa inadatta pu causare scosse elettriche o danni alle apparecchiature. (Classe l solo attrezzatura.) Per scollegare lapparecchio dallalimentazione, estrarre la spina dalla presa di corrente. Non consentire ai bambini di giocare con il prodotto. Conservare gli accessori (batteria, ecc) lontano dalla portata dei bambini. Non installare il prodotto su un supporto instabile od oscillante, un pavimento in pendenza o in un locale soggetto a vibrazioni. Non lasciare cadere il prodotto n fargli subire urti. Se il prodotto danneggiato, spegnere lunit, scollegare il cavo di alimentazione e contattare un centro assistenza. Scollegare il cavo di alimentazione dalla presa e pulire il prodotto con un panno morbido e asciutto. Non usare prodotti chimici quali cera, benzene, alcol, solventi, insetticidi, deodoranti per l'ambiente, lubrificanti o detergenti. Ci pu danneggiare laspetto o cancellare il testo stampato sul prodotto. Il dispositivo non deve essere esposto allacqua. Non gettare le batterie nel fuoco. Non provocare cortocircuito, n disassemblare o surriscaldare le batterie. Pericolo di esplosione in caso di sostituzione delle batterie esauste con batterie non idonee. Effettuare la sostituzione utilizzando solo batterie uguali o equivalenti a quelle esauste. AVVISO - PER EVITARE INCENDI, TENERE CANDELE E ALTRE FIAMME LIBERE LONTANO DA QUESTO PRODOTTO.
- Italiano -
Samsung.)
, 24 , , , ..,
- . ( l.)
Samsung
AC DC DC
- ( l )
Samsung
5060Hz 24
- ( l )
() ACDCDC
24
- (1)
Regulatory Compliance Statements Your Samsung product compliance class is marked in the user manual.
- Federal Communications Commission (FCC) - USA
- Industry Canada Equipment Standard for Digital Equipment (ICES-003) - Canada
- Voluntary Control Council for Interference (VCCI) - Japan
- Bureau of Standards Metrology and Inspection (BSMI) - Taiwan
- Korea Communications Commission(KCC) - Republic of Korea
- Italian Post Ministry (Homologation) - Italy FCC Class A Notice This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. NOTE:
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. FCC Class B Notice This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help. User Information Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. If necessary, consult with your dealer or an experienced radio/television technician for additiona suggestions. You may find the booklet called How to Identify and Resolve Radio/TV Interference Problems helpful. This booklet was prepared by the Federal Communications Commission. It is available from the U.S. Government Printing Office. Washington, DC 20402, Stock Number 004-000-00345-4. The party responsible for product compliance:
SAMSUNG ELECTRONICS CO., LTD. America QA Lab of Samsung 3351 Michelson Drive Suite #290, Irvine, CA92612 USA Warning User must use shielded signal interface cables with ferrite cores to maintain FCC compliance for the product. Provided with this monitor is a detachable power supply cord with IEC320 style terminations. It may be suitable for connection to any UL Listed personal computer with similar configuration. Before making the connection, make sure the voltage rating of the computer convenience outlet is the same as the monitor and that the ampere rating of the computer convenience outlet is equal or exceeds the monitor voltage rating. For 120 Volt applications, use only UL Listed detachable power cord with NEMA configuration 5-15P type(parallel blades) plug cap. For 240 Volt applications use only UL Listed detachable power supply cord with NEMA configuration 6-15P type
(tandem blades) plug cap. This television receiver provides display of television closed captioning in accordance with Section 15.119 of the FCC rules.
(TV broadcast receivers with picture screens 13 inches or larger in diameter models only)
-11-
ICES-003 Class A Notice - Avis NMB-003, Classe A This Class A digital apparatus complies with Canadian ICES-003. Cet appareil numrique de la classe A est conforme la norme NMB-003 du Canada. ICES-003 Class B Notice - Avis NMB-003, Classe B This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numrique de la classe B est conforme la norme NMB-003 du Canada. VCCI Class A Notice
(VCCI)A VCCI Class B Notice
(VCCI)B CCC Class A notice - China A BSMI Class A Notice The following statement is applicable to products shipped to Taiwan and marked as Class A on the product compliance label. European Notice(Europe Only) Products with the CE marking comply with the EMC Directive(2004/108/EC) and the Low Voltage Directive(2006/95/EC) issued by the Commission of the European Community. Compliance with these directives implies conformity to the following European Norms:
- EN55022: Radio Frequency Interference
- EN55024: Electromagnetic Immunity of Information Technology Equipment
- EN61000-3-2: Power Line Harmonics
- EN61000-3-3: Voltage Fluctuations
- EN55013: Radio disturbance characteristics of broadcast receivers and associated equipments
- EN55020: Electromagnetic immunity of broadcast receivers and associated equipments European Class A Warning
(If the user manual declares the product as Class A, following statement applies.) This is a class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures. A (KCC Class A Notice)
(A) ,
. B (KCC Class B Notice)
(B) , . Italian Homologation Notice Questo apparecchio e fabbricato in conformita al D.M.28.08.95 n.548 ed in particolare a quanto specificato nell Art.2, comma 1. Questo apparecchio e fabbricato nella U.E. in conformita al D.M.28.08.95 n.548 Art.2, comma 1 ed al D.M.26.03.92 Art.1
-. For products produced in countries except European Community Questo apparecchio e fabbricato in conformita al D.M.28.08.95 n.548 ed in particolare a quanto specificato nell Art.2, comma 1.
-. For products produced in European Community Questo apparecchio e fabbricato nella U.E. in conformita al D.M.28.08.95 n.548 Art.2, comma 1 ed al D.M.26.03.92 Art.1
-12-
Important Safety Instructions(UL Only) manufacturers instructions. or other apparatus (including amplifiers) that produce heat. 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not block any ventilation openings, Install in accordance with the 8) Do not install near any heat sources such as radiators, heat registers, stoves, 9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two 10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the 11) Only use attachments/accessories specified by the manufacturer. 12) Use only with cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 13) Unplug this apparatus during lightning storms or when unused for long periods of time. 14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. point where they exit from the apparatus. WARNING: To prevent damage which may result in fire or electric shock hazard, do not expose this appliance to rain or moisture. Ventilation Do not place the apparatus in a rack or bookcase. Ensure that there is adequate ventilation and that you've followed that manufacturer's instructions for mounting and installation. MPR II Compliance (MPR II applied model only) This monitor complies with SWEDAC(MPR II) recommendations for reduced electric and magnetic fields. ENERGYSTAR qualified model only As an ENERGY STAR Partner, Samsung has determined that this product or product models meets the ENERGY STAR guidelines for energy efficiency. Mercury Statement (LCD Monitor, LCD TV, DLP Projection TV, Projector for USA only) Contains Mercury, Dispose According to Local, State or Federal Laws
-13-
Wiring the Mains Power Supply Plug(UK Only) IMPORTANT NOTICE The mains lead on this equipment is supplied with a moulded plug incorporating a fuse. The value of the fuse is indicated on the pin face of the plug and, if it requires replacing, a fuse approved to BSI1362 of the same rating must be used. Never use the plug with the fuse cover omitted if the cover is detachable. If a replacement fuse cover is required, it must be of the same colour as the pin face of the plug. Replacement covers are available from your dealer. If the fitted plug is not suitable for the power points in your house or the cable is not long enough to reach a power point, you should obtain a suitable safety approved extension lead or consult your dealer for assistance. However, if there is no alternative but to cut off the plug, remove the fuse and then safely dispose of the plug. Do NOT connect the plug to a mains socket as there is a risk of shock hazard from the bared flexible cord. IMPORTANT The wires in the mains lead are coloured in accordance with the following code:
BLUE - NEUTRAL BROWN - LIVE As these colours may not correspond to the coloured markings identifying the terminals in your plug, proceed as follows :
The wire coloured BLUE must be connected to the terminal marked with the letter N or coloured BLUE or BLACK. The wire coloured BROWN must be connected to the terminal marked with the letter L or coloured BROWN or RED. WARNING:
DO NOT CONNECT EITHER WIRE TO THE EARTH TERMINAL, WHICH IS MARKED WITH THE LETTER E OR BY THE EARTH SYMBOL
, OR COLOURED GREEN OR GREEN AND YELLOW. Russia Only - PCT Notice TCO Recycling Information (TCO applied model only) For recycling information for TCO certified monitors, please contact the company corresponding to your region of residence. For those who reside in other countries, please contact a nearest local Samsung dealer for recycling information for the products to be treated in environmentally acceptable way. The information of Regional Takeback Schemes can be found at Samsungs website http://www.samsung.com/recycling_compliance Risk of hazard conneting Class l Equipment to Cable Distribution Networks For Class l equipment in Norway, intended to be connected to CABLE DISTRIBUTION SYSTEMS, the screen of a coax cable is required to be galvanic isolated from the protective earth.
- Connection to a Cable Distribution System is to be provided through a galvanic isolator
- M kun tilkoples kabel-TV nett via galvanisk isolator
-14-
Medical Requirement (Medical applied model only) Classifications:
In accordance with UL 2601-1/IEC 60601-1, the product is classified as Continuous duty Class I equipment, which is not protected against ingress of liquids. The product is not suitable for use in the presence of a flammable anaesthetic mixture with air or with oxygen or nitrous oxide.
- Type of protection against electrical shock : Class l
- Degree of protection against electrical shock (Patient connection) : Not applicable
- Degree of protection against harmful ingress of water : Ordinary equipment
- Methods of sterilization or disinfection : Not applicable
- Degree of safety of application in the presence of a flammable anesthetic material with air or with oxygen or nutrous oxide : Equipment not suitable for use in the presence of a flammable anesthetic mixture with air or with oxygen or nitrous oxide.
- Mode of operation : Continuos operation. EMC This equipment has been tested and found to comply with the limits for medical devices to the IEC 60601-1-2:2001. These limits are designed to provide reasonable protection against harmful interference in a typical medical installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to other devices in the vicinity. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to other devices, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Video In / RS 232 / Video Out Accessories equipment connected to the analog and digital interfaces must be certified to the respective IEC standards
(i.e. IEC 60950-1 for data processing equipment and IEC 60601-1 for medical equipment.) Furthermore all configurations shall comply with the system standard IEC 60601-1-1. Everybody who connects additional equipment to the signal input part or signal output part configures a medical system, and is therefore, responsible that the system complies with the requirements of the system standard IEC 60601-1-1. If in doubt, consult the technical services department or your local representative. Transport and Storage Limitations:
Temperature Range of -40C to +70C Relative Humidity of 10 -95%, non-condensing Barometric pressure : 700hPa to 1060 hPa Symbols The below is provided for your identiification of important symbols located in labels. Reorient or relocate the receiving device. Increase the separation between the equipment. Connect the equipment into an outlet on a circuit different from that to which the other device (s) are connected. Consult the manufacturer or field service technician for help. This symbol indicated that high voltage is present inside. It is dangerous to make any kind of contact with any internal part of this product. This symbol alerts you that important literature concerning operation and maintenance has been included with this product. Manufacturer's declaration of product compliance with applicable EEC directive(s) Protective Earth Ground AC (alternating current) voltage source DC (direct current) voltage source
* Bio-accumulative is defined as substances which accumulate within living organisms.
** Lead, Cadmium and Mercury are heavy metals which are Bio-accumulative.
-15-
-16-
1 | user manual book -1 | Users Manual | 1.92 MiB |
460/465 LED TV Installation manual imagine the possibilities Thank you for purchasing this Samsung product. To receive more complete service, please register your product at www.samsung.com/register Model Serial No.
[HC460-465-EU]Install-Guide-X0ENG.indd 1 2014-05-21 3:08:20 Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance. Product design and specifications may be changed without notice. Instruction This TV is provided with interactive functionality through a set-back box (SBB/STB) connected to the TV, and with other TVs in a computer controlled system for hotels and other hospitality businesses. Interactive: When the TV is powered-up initially, it sends a command to identify the SBB/STB. If identified, the TV switches to ONLINE mode and full control is through the SBB/STB. If the TV is in ONLINE mode, it stops receiving IR (Samsung remote) commands and acts according to the interface protocol. Stand-Alone: If SBB/STB is not identified, the TV should be switched to STAND-ALONE mode with restricted operations. When this TV (in Hotel mode) is operated with a SBB/STB, it is in one of two states:
ONLINE or STAND-ALONE. In the STAND-ALONE state, the TV will act as a Hotel TV, but without active communication. This prevents guests from trying to cheat the system by disconnecting the SBB/STB. Operational Modes Hotel Mode On Hotel TV Stand-alone Mode SBB/STB Online if one success within 10 attempts Power ON SBB/STB Online-10 consecutive fails SBB/STB Status-
Attempt every 2secs Online Mode Poll Rate 20/sec To set the details for Stand-alone or interactive mode, refer to pages 19-24(Setting the hotel option data : Stand-alone mode and Interactive mode) Some operations may be restricted to prevents guests from "cheating" the TV system. No main menu (Interactive mode) or Channel Menu, Plug & Play in Main Menu (Stand-Alone mode) Limited Volume and Panel key lock or unlock Still image warning Avoid displaying still images (like jpeg picture files) or still image elements (like TV Programme such as TV Programmeme logos, the panorama or 4:3 image format, stock or news bars at the bottom of the screen etc.) on the screen. Constantly displaying still pictures can cause uneven wear of the screen phosphor, which will affect the image quality. To reduce risk of this effect, please follow the recommendations below:
Avoid displaying the same TV channel for long periods. Always try do display any image over the full screen, use the TV set picture format menu for the best possible match. Reduce the brightness and contrast values to the minimum require values to achieve the desired picture quality. Exceeding these values may speed up the burnout process. Frequently use all TV features designed to reduce image retention and screen burnout, refer to the appropriate user manual section for more details. Securing the Installation Space Keep the required distances between the product and other objects (e.g. walls) to ensure proper ventilation. Failing to do so may result in fire or a problem with the product due to an increase in the internal temperature of the product. When using a stand or wall-mount, use parts provided by Samsung Electronics only. If you use parts provided by other manufacturers, it may result in a problem with the product or an injury due to the product falling. The appearance may differ depending on the product. Installation with a stand. Installation with a wall-mount. 10 cm 10 cm 10 cm 10 cm 10 cm 10 cm 10 cm
[HC460-465-EU]Install-Guide-X0ENG.indd 2 2014-05-21 3:08:20 Contents E N G L S H I y Instruction ................................................................................................................................................... 2 y Operational Modes ...................................................................................................................................... 2 y Still image warning ....................................................................................................................................... 2 y Securing the Installation Space .................................................................................................................... 2 y Accessories ................................................................................................................................................. 4 y Installing the LED TV Stand.......................................................................................................................... 4 y Using the TV's Controller ........................................................................................................................... 10 y Viewing the Remote Control ...................................................................................................................... 11 y Connecting the MediaHub HD ................................................................................................................... 13 y Connecting the RJP (Remote Jack Pack) .................................................................................................. 14 y Setting the Hotel Option Data .................................................................................................................... 16 y Installing the Wall Mount ............................................................................................................................ 41 y Securing the TV to the Wall ........................................................................................................................ 42 y Anti-theft Kensington Lock ........................................................................................................................ 42 y Specifications ............................................................................................................................................ 43 Correct Disposal of This Product (Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other European countries with separate collection systems) This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger, headset, USB cable) should not be disposed of with other household waste at the end of their working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate these items from other types of waste and recycle them responsibly to promote the sustainable reuse of material resources. Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take these items for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contract. This product and its electronic accessories should not be mixed with other commercial wastes for disposal. Correct disposal of batteries in this product
(Applicable in the European Union and other European countries with separate battery return systems.) This marking on the battery, manual or packaging indicates that the batteries in this product should not be disposed of with other household waste at the end of their working life. Where marked, the chemical symbols Hg, Cd or Pb indicate that the battery contains mercury, cadmium or lead above the reference levels in EC Directive 2006/66. If batteries are not properly disposed of, these substances can cause harm to human health or the environment. To protect natural resources and to promote material reuse, please separate batteries from other types of waste and recycle them through your local, free battery return system. English 3
[HC460-465-EU]Install-Guide-X0ENG.indd 3 2014-05-21 3:08:20 Please make sure the following items are included with your LED TV. If any items are missing, contact your dealer. The items colours and shapes may vary depending on the model. Accessories Remote Control & Batteries (AAA x 2) Power Cord Safety Guide (Not available in some locations) Quick Setup Guide Guide Stand Screws Stand The stand and stand screws may not be included depending on the model. The Data Cable may not be included depending on the SI Vendor. The 32 and larger LED TVs have swivel stands. You can set these stands so that the TVs swivel 20 degrees left and right or 60 degrees and right or 90 degrees left and right. Installing the LED TV Stand Stand Components When installing the stand, use the provided components and parts. A 1 EA B 1 EA C x 4 (M4 X L12) x 4 (M4 X L14) Stand Guide Stand Screws 4 English
[HC460-465-EU]Install-Guide-X0ENG.indd 4 2014-05-21 3:08:21 HG**EC670,HG**AC670,HG**EC675 1 2 C x4
(M4 X L14) B A Front ATTENTION DO NOT USE CHEMICALS DO NOT USE DO NOT USE GREASE OIL Top View 3 Place a soft cloth over a table to protect the TV, and then place the TV on the cloth screen side down. Insert the Stand Guide into the slot on the bottom of the TV. (Stand differ depending on the model) C x 4
(M4 X L12, for 40 and above models)
(Stand differ depending on the model) Make sure to distinguish between the front and back of the Stand and Stand Guide when assembling them. Make sure that at least two people lift and move the TV.
[HC460-465-EU]Install-Guide-X0ENG.indd 5 2014-05-21 3:08:22 English 5 Viewing the Connection Panel
- SIDE -
7 6
/
C L O N N G I
(
5 V 0 5 A
.
) VIDEO AUDIO N I V A RJP HDMI IN
(DVI) PC / DVI AUDIO IN ANT IN PC IN 2 3
- SIDE -
7 6
/
C L O N N G I
(
5 V 0 5 A
.
)
V A RJP HDMI
(DVI) PC / DVI
ANT PC 2 3 5 4 5 4 HG**AC46*
HG**AC46*
<China>
1 1 6 English
[HC460-465-EU]Install-Guide-X0ENG.indd 6 2014-05-21 3:08:22
/
C L O N N G I U S B
(
5 V 0 5 A
.
) I C O M M O N N T E R F A C E 1 8 6 VIDEO AUDIO 7 N I V A RJP 2 PC / DVI AUDIO IN ANT IN PC IN 3 HDMI IN
(DVI) 5 4 HG**EC460 Whenever you connect an external device to your TV, make sure that power on the unit is turned off. When connecting an external device, match the colour of the connection terminal to the cable. 1 USB (5V 0.5A) / CLONING Connector for software upgrades and Media Play, etc. Service connection. 2 PC/ DVI AUDIO IN: Connects to the audio input jacks on an Amplifier/Home Theater. 3 PC IN: Connect to the video output jack on your computer. 4 ANT IN (SATELLITE), (AIR/CABLE) To view television channels correctly, the TV must receive a signal from one of the following sources:
An outdoor antenna / A cable television system 5 HDMI IN: Connects to the HDMI jack of a device with an HDMI output. No sound connection is needed for an HDMI-HDMI connection. HDMI connections carry both audio and video. Use the HDMI IN (DVI) jack for a DVI connection to an external device. Use a DVI to HDMI cable or DVI-HDMI adapter (DVI to HDMI) for the video connection and the PC/DVI AUDIO IN jacks for audio. 6 AV IN / COMPONENT IN Connects the Component video / audio. Connect the component video cables (optional) to the component jacks ("PR", "PB", "Y") at the back of your TV and the other ends to the corresponding component video out jacks on the DVD. If you wish to connect both the Set-Top Box and the DVD player, you should connect the Set-Top Box to the DVD Player and connect the DVD Player to the component jacks ("PR", "PB", "Y") on your TV. The PR, PB and Y jacks on your component devices (DVD) are sometimes labeled Y, B-Y and R-Y or Y, Cb and Cr. Connect the RCA audio cables (optional) to [R - AUDIO - L] at the back of the TV set and the other ends to the corresponding audio out jacks on the DVD Player. 7 RJP: This port is an RJP (Remote Jack Pack) communication port that enables connecting different devices to additional modules to improve device use and convenience. 8 COMMON INTERFACE English 7
[HC460-465-EU]Install-Guide-X0ENG.indd 7 2014-05-21 3:08:22 Display Modes You can also select one of the standard resolutions listed in the Resolution column. The TV will automatically adjust to the resolution you choose. After connecting a computer to the TV, set the screen resolution for the TV on the computer. The optimal resolution is 1920 x 1080 @ 60 Hz. If it is set to any other than in the table below, the TV may display nothing. Set the resolution properly, referring to the user guide of the computer or its graphic card. The resolutions in the table are recommended. Optimal resolution is 1366 X 768 @ 60 Hz. Mode IBM MAC VESA CVT/DMT Resolution 720 x 400 640 x 480 832 x 624 1152 x 870 640 x 480 640 x 480 640 x 480 800 x 600 800 x 600 800 x 600 1024 x 768 1024 x 768 1024 x 768 1152 x 864 1280 x 720 1280 x 800 1280 x 1024 1280 x 1024 1366 x 768 Horizontal Frequency Vertical Frequency
(KHz) 31.469 35.000 49.726 68,681 31,469 37,861 37,500 37,879 48,077 46,875 48,363 56,476 60,023 67,500 45,000 49,702 63,981 79,976 47,712
(Hz) 70.087 66.667 74.551 75,062 59,940 72,809 75,000 60,317 72,188 75,000 60,004 70,069 75,029 75,000 60,000 59,810 60,020 75,025 59,790 Pixel Clock Frequency
(MHz) 28.322 30.240 57.284 100,000 25,175 31,500 31,500 40,000 50,000 49,500 65,000 75,000 78,750 108,000 74,250 83,500 108,000 135,000 85,500 Sync Polarity
(H / V)
-/+
-/-
-/-
-/-
-/-
-/-
-/-
+/+
+/+
+/+
-/-
-/-
+/+
+/+
+/+
-/+
+/+
+/+
+/+
8 English
[HC460-465-EU]Install-Guide-X0ENG.indd 8 2014-05-21 3:08:23 Optimal resolution is 1920 X 1080 @ 60 Hz. Mode IBM MAC VESA CVT VESA DMT VESA GTF Resolution 720 x 400 640 x 480 832 x 624 1152 x 870 720 x 576 1152 x 864 1280 x 720 1280 x 960 640 x 480 640 x 480 640 x 480 800 x 600 800 x 600 800 x 600 1024 x 768 1024 x 768 1024 x 768 1152 x 864 1280 x 1024 1280 x 1024 1280 x 720 1280 x 800 1280 x 800 1360 x 768 1440 x 900 1440 x 900 1680 x 1050 1280 x 720 1280 x 1024 VESA DMT / DTV CEA 1920 x 1080p Horizontal Frequency Vertical Frequency Pixel Clock Frequency Sync Polarity
(KHz) 31.469 35.000 49.726 68.681 35,910 53,783 56,456 75,231 31,469 37,861 37,500 37,879 48,077 46,875 48,363 56,476 60,023 67,500 63,981 79,976 45,000 49,702 62,795 47,712 55,935 70,635 65,290 52,500 74,620 67,500
(Hz) 70.087 66.667 74.551 75.062 59,950 59,959 74,777 74,857 59,940 72,809 75,000 60,317 72,188 75,000 60,004 70,069 75,029 75,000 60,020 75,025 60,000 59,810 74,934 60,015 59,887 74,984 59,954 70,000 70,000 60,000
(MHz) 28.322 30.240 57.284 100.000 32,750 81,750 95,750 130,000 25,175 31,500 31,500 40,000 50,000 49,500 65,000 75,000 78,750 108,000 108,000 135,000 74,250 83,500 106,500 85,500 106,500 136,750 146,250 89,040 128,943 148,500
(H / V)
-/+
-/-
-/-
-/-
-/+
-/+
-/+
-/+
-/-
-/-
-/-
+/+
+/+
+/+
-/-
-/-
+/+
+/+
+/+
+/+
+/+
-/+
-/+
+/+
-/+
-/+
-/+
-/+
-/-
+/+
When using an HDMI/DVI cable connection, you must use the HDMI IN (DVI) jack. (The HC470 is not support) The interlace mode is not supported. The set might operate abnormally if a non-standard video format is selected. Separate and Composite modes are supported. SOG is not supported.
[HC460-465-EU]Install-Guide-X0ENG.indd 9 2014-05-21 3:08:23 English 9 The TV Controller, which is a small joystick like button at the right back of the TV, lets you control the TV without the remote control. Using the TV's Controller Selecting Media Play Selecting the Menu Selecting a Source Function menu Power off Remote control sensor TV Controller The image is drawn by facing the front side of the TV. Some functions which require a PIN code may not be available. The product colour and shape may vary depending on the model. Exits the menu when pressing the controller for longer than 1 second. When selecting the function by moving the controller in the up/down/left/ right directions, be sure not to press the controller. If you press it first, you cannot move it in the up/down/left/right directions. Standby mode Your TV enters Standby mode when you turn it off and continues to consume a small amount of electric power. To be safe and to decrease power consumption, do not leave your TV in standby mode for long periods of time (when you are away on vacation, for example). It is best to unplug the power cord. 10 English
[HC460-465-EU]Install-Guide-X0ENG.indd 10 2014-05-21 3:08:23 This remote control has Braille points on the Power, Channel, and Volume buttons and can be used by visually impaired persons. Viewing the Remote Control Turns the TV on and off. Display and select available video sources. Have direct access to channels Alternately selects Teletext, Double or Mix. TTX/MIX GUIDE GUIDE CONTENT CLOCK Adjust the volume. Display channel list on the screen. Display the main on-screen menu. Quickly select frequently used functions. Select on-screen menu items and change menu values. Return to the previous menu. Buttons in the Channel list, Contents Home menu, etc. ALARM: Enter the hour you want the TV to turn on. W: Turns the 3D image on or off. ( Not available ) SUBT.: Displays digital subtitles. CH LIST HOME CONTENT CLOCK A B C D ALARM SUBT. Electronic Programme Guide (EPG) display. Cut off the sound temporarily. Change channels. Swich to the HOME Screen. View the Contents Home. Press to display information on the TV screen. CLOCK: When you press INFO key in standby mode, TV screen displays the time. Exit the menu. Use these buttons in the Contents Home. Installing batteries (Battery size: AAA) Rear of the Remote NOTE After you have intalled the batteries, use a screwdriver to screw in the screw that holds the battey cover closed. Use the remote control within 23 feet of the TV. Bright light may affect the performance of the remote control. Avoid using nearby special fluorescent light or neon signs. The colour and shape may vary depending on the model. Remote control button 'HOME' & '3D' are not supported. When pressing these buttons, the TV unit does not respond. English 11
[HC460-465-EU]Install-Guide-X0ENG.indd 11 2014-05-21 3:08:23 Using the Football Mode Football Mode t MENU m Applications Football Mode ENTER E This mode provides optimized condition for watching sports games. a (Zoom): Pause playback and divide the picture into 9 parts. Select a part to zoom it in. Press this button again to resume. When the Football Mode is on, the picture and sound modes are set to Stadium automatically. If you turn the TV off while watching Football Mode, the Football Mode will be disable. When the Data Service is running, the Zoom is not available. 12 English
[HC460-465-EU]Install-Guide-X0ENG.indd 12 2014-05-21 3:08:23 Output to any external source connected to MediaHub HD on the hotel desk. Connecting the MediaHub HD MediaHub HD Rear HDMI USB RS/232 TV Rear Panel VIDEO VIDEO AUDIO AUDIO N N I I V V A A RJP HDMI IN
(DVI) 2 HDMI cable PC / DVI PC / DVI AUDIO IN AUDIO IN ANT IN ANT IN PC IN PC IN 1 RS-232 Data Cable 1. Connect the RJP port of the TV and the RS/232 port of the MediaHub HD. 2. Connect the HDMI IN port of the TV and the HDMI port of the MediaHub HD. MediaHub HD The MediaHub HD is a hardware module that has different Audio Video inputs (A/V, Audio, PC, HDMI and USB) and corresponding outputs. The corresponding output sources connect from MediaHub to the TV. MediaHub communicates with the TV via RS232. Hot Plug & Play is a function that allows hotel guests to connect an external source to the MediaHub. MediaHub communicates with the TV by sending messages regarding Active/
Inactive sources. The TV switches to the Active external source. You have to connect the HDMI of the MediaHub to the HDMI IN port of the TV. When the TV is on, connect the TV and the RJP within 10 seconds. Special features PIP Auto Detection
[HC460-465-EU]Install-Guide-X0ENG.indd 13 2014-05-21 3:08:23 English 13 Output to any external source connected to RJP on the hotel desk. Connecting the RJP (Remote Jack Pack) 3 Video Cable RJP Rear USB HDMI VIDEO AUDIO AUDIO/PC
/
R S 2 3 2 TV Rear Panel VIDEO AUDIO 4 HDMI cable N I V A RJP HDMI IN
(DVI) ANT IN ANT IN 5 2 Audio Cable PC / DVI PC / DVI AUDIO IN AUDIO IN PC IN 1 D-sub / PC Audio cable 1. Connect the PC IN / PC/DVI AUDIO IN port of the TV to the PC/AUDIO port of the RJP. 2. Connect the AV IN [VIDEO]/[L-AUDIO-R] port of the TV to the VIDEO port of the RJP. 3. Connect the AV IN [VIDEO] port of the TV to the VIDEO port of the RJP. 4. Connect the HDMI IN port of the TV and the HDMI port of the RJP. 5. Connect the RJP port of the TV and the RS/232 port of the RJP. The RJP (Remote Jack Pack) compatible with this Samsung TV is TeleAdapt TA-7610, TA-7650 (HD) and TA-
7660 (HD Plus). RJP (Remote Jack Pack): RJP stands for Remote Jack Pack. The RJP is a hardware module that has different Audio Video inputs (A/V, Audio, PC and HDMI) and corresponding outputs. The corresponding output sources are connected from the RJP to the TV. The RJP communicates with the TV via RS232. The Hot Plug & Play function allows hotel guests to connect an external source to the RJP. The RJP communicates with the TV by sending mes-
sages regarding Active/ Inactive sources. The TV will switch to the Active external source according to the priority set by the User. You can select HDMI IN and AV IN for connecting the RJP. When the TV is on, connect the TV and the RJP within 10 seconds. 14 English
[HC460-465-EU]Install-Guide-X0ENG.indd 14 2014-05-21 3:08:24 The RJP can be returned to the factory default settings by pressing the A/V and HDMI buttons simultaneously for 10 seconds. All LEDs blink 5 times to acknowledge that this has been finished. The RJP will automatically turn off any LEDs after 5 minutes to avoid unnecessary light pollution in the hotel room. The LEDs that were turned off will turn on again if the guest touches any of the buttons and the 5 minute timer will restart. If the guest then touches another source button, the TV will change to the selected source and the corre-
sponding LED will be lit. After an RJP Reset or a TV Power OFF/ON, it takes approx. 10 seconds to establish communications between the TV and the RJP. The following table shows the approximate time in seconds to switch from the TV to the input source, based on the priority. Scenario 1: When no inputs are connected. Source AV PC HDMI To Connect 2 Sec 0.7 Sec 3.9 Sec Scenario 2: When two or more inputs are connected and an Input source is disconnected and then reconnected. Source AV PC HDMI Disconnect To Connect 4.5 Sec 0.7 Sec 3.9 Sec 2 Sec 0.7 Sec 3.9 Sec Total 6.5 Sec 1.4 Sec 7.8 Sec E.g. If the RJP has all its live sources AV, PC and HDMI connected, AV is viewed as the highest priority. If the RJP is in HDMI mode, and a guest removes and reconnects the AV, the minimum time required to switch to the AV is 6.5 seconds. To connect audio (Ipod or Mp3), Music mode should be ON and Jack Ident detect should be OFF. A/V, PC and HDMI input sources are supported.
[HC460-465-EU]Install-Guide-X0ENG.indd 15 2014-05-21 3:08:24 English 15 To Enter: Press the MUTE 1 1 9 ENTERE buttons in order. (From the Hospitality mode, the Standalone mode is set.) To Exit from this menu : power off and turn on again. Setting the Hotel Option Data Description Interactive mode : TV works with an SI STB or SBB. Select Hospitality mode. Stand-alone mode : TV works alone, without an SI STB or SBB. Interactive mode : Samsung /2M/ Locatel / VDA / VDA-S / Acentic /Sutrinere-
lone mode : OFF /Movielink/Swisscom/ Smoovie Set the default values that will be applied when the TV is turned on. User Defined : Lets you set Power On Channel and Channel Type manually. See Power On Channel and Channel Type below. Last Saved : If you select this item, when the TV is turned on, it displays the channel it was displaying when it was turned off. When the TV is turned on, it switches automatically to this channel. Select channel band : AIR (analog air band), DTV (digital air band), CATV
(analog cable band), CDTV (digital cable band) User Defined : Lets you set the Power On Volume manually. See Power On Volume below. Last Saved : When the TV is turned on, it returns to the volume that had been set when the power had been turned off. The TV turns on with this Volume Level in Stand Alone Hospitality mode. The minimum Volume Level the user can set in Stand Alone Hospitality mode. The maximum Volume Level the user can set in Stand Alone Hospitality mode. Select the input source the TV displays when turns on. Determines the TV's state when power returns after a power failure or after you have unplugged the TV and then plugged it in again. LAST OPTION : Returns to its last Power state. If it was in Stand-by, it returns to Stand-by. If it was on, it turns on. Power On : When the power returns, the TV turns on. Standby : When the power returns, the TV enters the Standby mode. Gives you direct, immediate access to some of the Channel menu functions on the user Channel menu such as Auto Program, Antenna selection, etc. The Channel Editor lets you edit the channels stored in the TV's memory. Using Channel Editor you can:
Change the channel numbers and names, and sort the channels in your desired channel number order. Apply the video mute to channels you select. The video mute blanks out the video from a channel and outputs only the sound while displaying a speaker icon on the screen. The Channel Editor also lets you view information about each channel easily, without your having to display each channel directly. This Feature enables showing/browsing all antenna type (Air/Cable or Satellite) channels at the same time. On: When ON, guests can access the complete Channel Map irrespective of the selected antenna type. The Channel list will also populate Air as well Cable type channels. Off: When OFF, guest can access the Channel Map corresponding to the selected antenna type [AIR/CABLE or Satellite] only. The Channel list/Editor will only show the selected antenna type channels. On : Check the DTV Programme channel number. (the DTV channel editor is inaccessible) Off: Do not check the DTV Programme channel number. (the DTV channel editor is accessible, but additional channel Programme number update is not supported) No 1 2 Hotel TV Function Category Item initial value Hospitality Mode Hospitality Mode Standalone SI Vendor SI Vendor OFF Power On Channel Last Saved Power On Channel Num Power On Channel Type 3 Power On Power On Volume Last Saved Power On Volume Num Min Volume Max Volume Power On Source 0 100 TV Power On Option Last Option Channel Setup Channel Editor 4 Channel Mixed Channel Map ON Dynamic SI OFF 16 English
[HC460-465-EU]Install-Guide-X0ENG.indd 16 2014-05-21 3:08:24 No Hotel TV Function Category Item initial value Description 4 Channel Channel Rescan Message My Channel Genre Editor ON OFF Subtitle Auto On OFF TTX Widescreen Mode Picture Menu Lock Menu Display OFF OFF ON 5 Menu OSD Panel Button Lock Unlock Home Menu Display Home Menu Editor Home Menu Auto Start ON ON Local Time Manual 6 Clock 7 Music Mode Tiime Channel Type Time Channel Num Music Mode AV Music Mode Backlight Priority AV 8 Remote Jack Priority PC Pack AV Option HDMI Option OFF OFF 1 2 AV HDMI When there is a mismatch between the data in the channel map and the transmitted data , the TV autotunes the channels to restore the data/parameters in the channel map. On: When Channel Rescan Message is ON, The OSD showing that the chan-
nels are being rescanned will be displayed to Hotel Guests. Off: A Hotel Admin can turn the Channel Rescan Message OFF, if the rescan message OSD should not to be displayed to Hotel Guests. Enable or disable the Mychannel feature. Edit the genre for channels. (Available when Mychannel is On) This function turns the function On/Off that automatically turns on the subtitles in a specific country. This function is supported for Hotel TVs that are ready to receive DVB broadcasts that is heading to Europe. This function is related to Frances subtitle specification. The rest of the countries subtitles function according to the appropriate country specifications regardless of the Subtitle Auto On function. On: When the Subtitle Auto On function is ON, it follows Frances subtitle specifications. Off: When the Subtitle Auto On function is OFF, it does not follow Frances subtitle specifications. On : The TTX Widescreen Mode is displayed. Off :The TTX Widescreen Mode is not displayed. Enable or disable the Picture Menu. On : The Main Menu is displayed. Off : The Main Menu is not displayed. Turning the front panel (local key) operations on/off. Unlock : Unlocks all panel keys. Lock : Locks all panel keys. OnlyPower : Locks all panel keys except the Power panel key. Menu/Source : Locks the Menu and Source panel keys. OFF:The Home Menu is not displayed. ON:The Home Menu is displayed. Edit Home Menu . ON:The Home Menu is Auto Start. OFF:The Home Menu is not Auto Start. Selection of the way to update clock data Manual: Use clock data from DVB channel or manual clock setting When the TV is in the stand-alone mode. TTX: manual clock setting (with updating from TTX data). To get music output from an mp3/audio player through an AV Input Source. When on, you can hear sound from the player through the TV even there is no video signal. The TVs backlight, however, remains on. And add a video signal,it works normally. Backlight On/Off option in Music mode to save energy If the jack priority is set, the corresponding source is automatically set when a jack is inserted according to the jack priority If the jack priority is set, the corresponding source is automatically set when a jack is inserted according to the jack priority. Select RJP AV Source (Source selection depends on Model). Select which HDMI source of the TV is connected to the RJP jack. English 17
[HC460-465-EU]Install-Guide-X0ENG.indd 17 2014-05-21 3:08:24 No Hotel TV Function Category Item initial value Description USB Pop-up Screen Default 9 External Source External Source Banner ON Auto source OFF Anynet+Return Source Power On Src 10 Eco Solution Energy saving OFF When a USB device is connected to the TV :
Default : A popup window appears. Automatic : Opens the USB contents menu automatically. Disable : Neither the popup window nor the menu appears. If set to On, the TV displays the External Source Banner (information) when you change the TV source to another external input, press the Info key, or turn the TV on. On : The External Source information is displayed on the TV screen. Off : The External Source information is not displayed on the TV screen. On : When an external input source is connected to the TV, the TV identifies the input source, and then automatically switches to that input source. Off : Auto Source function is Off. Select the return TV source after stopping an Anynet+(HDMI-CEC) connection.
(This fuction is especially useful for the Guestlink RJP.) Adjusts the brightness of the TV to reduce power consumption. Off: Turns off the energy saving function. Low: Sets the TV to low energy saving mode. Medium: Sets the TV to medium energy saving mode. High: Sets the TV to high energy saving mode. Welcome Message OFF Displays a the Welcome Message for 5 seconds when the TV turns On. Edit Welcome Message Edits the Welcome Message. 11 Logo/
Message Hospitality Logo OFF Hospitality Logo DL 12 Cloning Logo Display Time Welcome Message Edit Welcome Message Hospitality Logo REACH 3.0 REACH 2.0 REACH Channel Group ID Ticker 13 REACH Solution REACH Update Time REACH Update Immediate Room Number REACH 2.0 TV Sound REACH 2.0 Server Version 18 English OFF OFF OFF OFF Turns the Hospitality logo feature On or Off, If On, when the TV is turned on, the Logo is displayed, before the signal from the initial source, for the amount of time set in "Logo Display Time". Downloads the Hospitality logo. Hospitality logo file requirements:
BMP or AVI files only. Max file size : BMP - 960 X 540. AVI - 30MB. The file can only be named samsung.bmp or samsung.avi. Hospitality Logo Display Time (3/5/7 seconds). Displays a the Welcome Message for 5 seconds when the TV turns On. Edits the Welcome Message. Turns the Hospitality logo feature On or Off, If On, when the TV is turned on, the Logo is displayed, before the signal from the initial source, for the amount of time set in "Logo Display Time". ON: Open the REACH 3.0 OFF:Closed the REACH 3.0 ON: Open the REACH 2.0 OFF:Closed the REACH 2.0 Select SIRCH Update Channel Select the SIRCH Group ID On: The TICKER contents is displayed. Off: The TICKER contents is not displayed. Select the SIRCH update Time. In the SIRCH update time , you have the option to perform an automatic upgrade at 12:00 AM/PM or at 2:00 AM/PM. You can perform hourly upgrades at an interval of either 1 hr or 2 hrs. On : Whenever the TV enters Standby mode, always performs the SIRCH Update Off : Only performs the SIRCH Update at the selected SIRCH Update Time Edit the room number On: The TV sound in the current TV source is output continuously even though the REACH 2.0 TV menu is displayed. Off: The TV sound in the current TV source is stopped when the REACH 2.0 TV menu is displayed. Display the version of the SIRCH Clone file currently updated on the TV.
[HC460-465-EU]Install-Guide-X0ENG.indd 18 2014-05-21 3:08:24 No Hotel TV Function Category Item initial value Description 15 Security Password Input Password Setting Password Reset Security Mode USB HDMI TTX Security Self Diagnosis for TV 16 System SW Update Service Pattern Contact Samsung OFF Input Password 00000000. Set new Password. Reset Password to 00000000. Security Mode ON or OFF. USB Disable or Enable. HDMI Disable or Enable. TTX function Enable or disabl Enter Self Diagnosis Menu. Picture Test: Use to check for picture problems. If the problem appears in the test picture, select Yes and follow the directions on the screen. Sound Test: Use the built-in melody sound to check for sound problems. If the problem occurs during the test, select Yes and follow the directions on the screen. SW USB Update function Same function with SVC Service Pattern Contact Samsung TV reset Factory reset REACH (Remote Enhanced Active Control for Hospitality) is a professional and interactive remote controller that lets you deliver TV firmware updates, cloning data, channel mapping changes, S-LYNK REACH contents, and TICKER contents through RF DTV to several hundred hospitality TVs simultaneously. The REACH functions are only avail-
able in standalone mode. The REACH Server is sold separately. Refer to the REACH server manual enclosed in the REACH server product for more information on operating it.
[HC460-465-EU]Install-Guide-X0ENG.indd 19 2014-05-21 3:08:24 English 19 Welcome Message The Welcome message is a feature that allows you to display customized message on the TV every time the TV is turned on by a guest in a hotel room. The Welcome message settings are placed in the Hotel Option Menu. The Welcome message should be ON in order for the message to be displayed when the power is turned on. Hospitality Mode Standalone System SI Vendor OFF Power On Channel Menu OSD Clock Music Mode Remote Jack Pack External Source Bathroom Speaker Eco Solution Logo/Message Cioning REACH Solution Security r Welcome Message Edit Welcome Message Hospitality Logo Hospitality Logo DL Logo Display Time ON ON
... ..
<Depending on model and region, some menu items may not exist>
The Welcome message can be up to 25 characters and can be edited in the Hotel Service menu. The following is the list of characters supported for the Welcome message. Only the capital letters A to Z are allowed. The Welcome message can be edited using the navigation, colour & enter keys of the remote control in the Edit Welcome Message OSD. Edit Welcome Message W E L C O M E _ A H O V B I P W C J Q X D K R Y E L S Z F M T G N U A B C D Move to left Move to Right Leave Black Done Move Enter Return The Welcome message and hotel logo cannot be active at the same time. 20 English
[HC460-465-EU]Install-Guide-X0ENG.indd 20 2014-05-21 3:08:24
1 | user manual book -2 | Users Manual | 3.54 MiB |
Hotel Logo The Hospitality Logo function displays the Hotel's logo when the TV is powered on. The Hospitality Logo settings are in the Hospitality mode menus. The Logo Download and Logo Display Menu items are enabled when you turn the Hospitality Logo option on. If there is a logo image stored in the memory and the Hospitality Logo option is on, the Hospitality logo is displayed when the TV is turned on. The Hospitality logo is not displayed when the Hospitality Logo option is off, even if the logo image has been loaded onto the TV. Hospitality Mode Standalone System SI Vendor OFF Power On Channel Menu OSD Clock Music Mode Remote Jack Pack External Source Bathroom Speaker Eco Solution Logo/Message Cioning REACH Solution Security r Welcome Message Edit Welcome Message Hospitality Logo Hospitality Logo DL OFF BMP Logo Display Time 5 Second
<Depending on model and region, some menu items may not exist>
Hospitality Logo This option lets you choose whether the Hospitality Logo image is displayed or not. The Initial value is OFF. Can be set to OFF or ON. When set to ON, the Logo Download and Logo Time Display menu items become accessible. Hospitality Logo DL This option lets you download the logo image to the TVs memory from a USB device. The Wait message appears while the image is being copied to the TV. The Completed message appears when the copy operation has finished successfully. The Failed message appears when the copy operation was unsuccessful. The No USB device message appears if no USB device is connected. The No File message appears if there is no file to copy on the USB device or if the file is in the wrong format (must be a BMP file). If the No File message appears and there is a logo file on the USB device, check the file format. Logo File Format The TV only supports the BMP and AVI formats. The file name must be samsung.bmp or samsung.avi. The maximum resolution of the BMP format is 1280 x 720. The maximum file size of the AVI format is 30MB. The TV does not change the size or scale of the image.
[HC460-465-EU]Install-Guide-X0ENG.indd 21 2014-05-21 3:08:25 English 21 Cloning USB Cloning is a function to download user configured settings (Picture, Sound, Input, Channel, Setup, and Hotel Setup) from one TV set and upload the same settings to other TV sets. All user-defined settings from the TV (Master Set) can be copied to the USB device. Cloning from TV to USB: This is an operation that copies the stored data from a specific area of the TV EEPROM to the USB device. 1. Insert a USB drive into the USB port on the back of the TV. 2. Enter the Hotel Options by pressing these buttons in the following order. MUTE 1 1 9 ENTER 3. Press the or button to select Clone TV to USB, then press the ENTER button.
(ARC)
(ARC)
(
)
(5V 0.5A)
(5V 0.5A)
(5V 0.5A)
/ CLONING
/ CLONING
/ CLONING 4. The message Clone TV to USB is displayed, then press the ENTER button. 5. You can check the status of the USB cloning operation. In Progress: While copying data to the USB device. Completed: The copy operation was finished successfully. Failed: The copy operation was not finished successfully. No USB: No USB device connected. Logo/Message Cloning d Clone TV to USB Clone USB to TV Setting Auto Initialize OFF Clone USB to TV: This is an operation that downloads the stored data to the USB device to the TV set. 1. Insert a USB drive into the USB port at the back of the TV. 2. Enter the Hotel Options by pressing these buttons in the following order. MUTE 1 1 9 ENTER Logo/Message Cloning d Clone TV to USB Clone USB to TV Setting Auto Initialize OFF 3. Press the or button to select Clone USB to TV, then press the ENTER button. 4. The message Clone USB to TV is displayed, then press the ENTER button. 5. You can check the status of the USB cloning operation In Progress: While copying data to the USB device. Completed: The copy operation was finished successfully. Failed: The copy operation was not finished successfully. No USB: No USB device connected. No File: There is no file to copy on the USB device. Activate copying from USB to TV by pressing ENTER key for 5 seconds. The CLONE function only supports the same model series. (It does not work properly for different model series.) For fast, instant cloning during installation, insert a USB drive with master settings from the first TV and press the Enter key for 5 seconds. 22 English
[HC460-465-EU]Install-Guide-X0ENG.indd 22 2014-05-21 3:08:25 Plug & Play The Hotel Plug & Play function automatically performs the Hotel mode selection, Country Setup, Clock Setup and Picture mode Setup when the TV starts for the first time. Hotel Plug & Play is only available when the power is turned ON for the first time. After setting up the TV first and running Clone TV to USB. Next, the TV only needs to exit Hotel Plug & Play, connect to the USB device, then run Clone USB to TV. Standalone mode is set TV will enter the RF mode Local Set Change Local Set if Located in North America, Latin America and Europe. In other regions, Please press SKIP button move to the next step. Current Localset : EU Change Skip If Standalone Only is selected If Skip is selected Easy Set up If you select this,Easy setup will be started. There are Essential Details, Channel Scan, Clock and Terms in Easy Setup. Next c Standalone Setup
(Continue Setup) Standalone Only
(End Setup) If Standalone Setup is selected Select your Language Select your language to start the on screen setup. English Eesti Suomi Franais Deutsch Press the buttons to move the highlight. Press the enter button to select. The Language Setting will be applied to Main Menu and not Plug and Play. MAIN : Option, MODE : DTV, RES : NOTSUPPORT, Standalone Menu Hospitality Mode Standalone OFF SI Vendor Power On Channel Menu OSD Clock Music Mode Remote Jack Pack External Source Eco Solution Logo/Message Cloning REACH Solution Security System When complete, power down TV. When pressing OK button, the hotel menu appears as shown on the left. Complete the hotel menu settings, and then reset the TV. You can use your TV. Congure your TV Select your information in the categories below. Select the country that you're in now Country Picture Mode Bulgaria Standard Auto Tuning To receive channels, congure the options below then select Scan. Select the connected aerial that you want to use to get channels. Aerial Air Channel Type Digital & Analogue Scan Auto Tuning Auto tuning is nding channels for you... C40 625MHz Digital TV Radio Data/Other Analogue 2%
0 0 0 0 0 Stop Auto Tuning Auto Tuning Complete. Digital TV Radio Data/Other Analogue 0 0 0 0 0 Change Settings Scan Again
<Depending on Region, this step may not exist.> After selecting the country in the country menu, some models may proceed with an additional option to setup the pin number. If you forget the PIN code, in the Hotel menu, select the SERVICE TV Reset. And set the pin code again in the Plug & Play.
* It may differ depending on the model. TV Setup Complete!
Your TV is now ready to use. Ok
* It may differ depending on the model. Clock You can adjust your time to set DST, Time Zone and clock mode Set current date and time Clock Mode Date Time Time Zone DST Auto
--/--/----
--:--
Auto Off
--:--
English 23
[HC460-465-EU]Install-Guide-X0ENG.indd 23 2014-05-21 3:08:27 Local Set Easy Set Up Change Local Set if Located in North America, Latin America and Europe. In other regions, please press SKIP button move to the next step. Current Localset : AD_AU_NZ2 If Skip is selected Change Skip c Standalone Setup
(Continue Setup) Standalone Only
(End Setup) If you select this, Easy setup will be started. There are Essential Details, Channel Scan, Clock and Terms in Easy setup. If Standalone Setup is selected Select yout Language Select your language to start the on screen setup. c English Franais Italiano
^
Press the udlr buttons to move the highlight. Press the enter button to select. The Language Setting will be applied to Main Menu and not Plug and Play. Select Language
(Hong Kong only have English ) Configure your TV Select your infomation in the categories below. Select the country that you're in now Country Australia Picture Mode Standard Set Country and Picture Mode
(Hong Kong no have Country option) Auto Tuning To receive channels, configure the options below then select Scan. Select the connected aerial that you want to use to get channels. Aerial Air Channel Type Digital & Analogue Scan Auto Tuning Auto Tuning Auto Tuning is finding channels for you... Auto Tuning completed. Digital 0 TV 0 Radio 0 Data/Other 0 Analogue 0 Stop change settings Scan Again Channel 27 7%
Digital 0 TV 0 Radio 0 Data/Other 0 Analogue 0 24 English If Standalone Only is selected:
Standalone mode has been set. TV will enter the RF mode. Power off MAIN : Option, MODE : DTV, RES : NOTSUPPORT, Standalone Menu Hospitality Mode Standalone SI Vendor OFF Power On Channel Menu OSD Clock Music Mode Remote Jack Pack External Source Eco Solution Logo/Message Cloning REACH Solution Security System When complete, Power down TV. TV Setup Complete!
Your TV is now ready to use. OK Clock You can adjust your time to set DST, Time Zone and clock mode Set current date and time Clock Mode Auto Date -- / -- / ----
Time -- : -- --
Time Zone New South Wales/ACT
-- : -- --
-- : --
Set Clock
[HC460-465-EU]Install-Guide-X0ENG.indd 24 2014-05-21 3:08:28 1. LocalSet Check the Current Localset. If you want to change the localset, select the Change. If you select the Skip, the Start screen appears. 2. Start - Easy Set Up If you select the Standalone Only, the Standalone hotel mode is set by default. When you select the Interactive, Interactive Setup Menu is displayed. Press the power off button to exit from the Interactive menu. Select the Standalone Plug & Play to go next step. 3. Select the Language Select the OSD (On Screen Display) language. Display time: The OSD timeouts and operations are the same as all of Samsung's consumer TV models. 4. Select the Country and Picture Mode Select the appropriate country and picture mode. Depending on model and region, some country may not exist. 5. Auto Tuning Select the antenna source and channel type. Configure the settings and select the Scan. The Auto Tuning operation starts searching for channels When the Auto Tuning operation is completed, the channel information is displayed. 6. Clock Set the right time by setting the DST (Daylight Savings Time) and Time Zone. 7. TV Setup Complete
[HC460-465-EU]Install-Guide-X0ENG.indd 25 2014-05-21 3:08:28 English 25 HD Plug & Play Local Set (Only Europe) Local Set is very important software setting value such as Languages, Broadcast frequencies, etc. TV might not function, if Local Set is not correctly configured. Select correct Local Set with country list provided. Region Country Local Set Local Set change option on the first page of Region Country HD plug&play Select right Local Set with country list Europe CIS EU EU_ITALY EU_GER EU_FRANCE EU_BENELUX EU_SPAIN EU_UK NORDIC EU_TURKEY EU_POLAND CIS_RUSSIA Bulgaria Croatia Czech Estonia Greece Hungary Latvia Lithuania Romania Serbia Slovakia Slovenia EU Others Italy Austria Germany Switzerland France Belgium Luxembourg Netherlands Portugal Spain United Kingdom Ireland Denmark Finland Norway Sweden Turkey Poland Kazakhstan Russia Ukraine If you need to change Local Set after HD plug&play, click TV Reset function on Factory mode, you can progress HD plug&play including Local Set change. Self Diagnosis for TV SW Update Service Pattern OFF Contact Samsung TV Reset Local Set Local Set Change Locat Set if Located in North America, Latin America and Europe. In other regions, Please press SKIP button move to the next step. When Local Set is Changed, TV will turn off automatically to apply it. Current Localset : EU Change Skip EU Countries List Bulgria, Croatia, Czech, Estonia, Greece, Hungary, Latvia, Lithuania, Romania, Serbia, Slovakia, Slovenia, EU-Others Local Set Local Set When Local Set is changed, TV will turn off automatically to apply it. When Local Set is changed, TV will turn off automatically to apply it. EU_GER EU_FRANCE Countries List Austria, Germany, Switzerland Countries List France Local Set When Local Set is changed, TV will turn off automatically to apply it. NORDIC Countries List Denmark, Finland, Norway, Sweden TV will reboot automatically to apply new Local Set Local Set When Local Set is Changed, TV will restart automatically to apply it. Turn off and reboot automatically as Local Set is changed OK Countries List Bulgria, Croatia, Czech, Estonia, Greece, Hungary, Latvia, Lithuania, Romania, Serbia, Slovakia, Slovenia, EU-Others After reboot, updated Local Set is shown Local Set Change Locat Set if Located in North America, Latin America and Europe. In other regions, please press SKIP button move to the next step. Current Localset : EU_FRANCE Change Skip Easy Set up Standalone Setup
(Continue Setup) Standalone Only
(End Setup) Press Skip, general HD plug&play will be continued If you select this,Easy setup will be started. There are Essential Details, Channel Scan, Clock and Terms in Easy Setup. Next Local Set Change Locat Set if Located in North America, Latin America and Europe. In other regions, Please press SKIP button move to the next step. Current Localset : EU_FRANCE Change Skip 26 English
[HC460-465-EU]Install-Guide-X0ENG.indd 26 2014-05-21 3:08:28 SW Clock The SW Clock shows the current time on the screen when a user presses the Info remote control key in standby mode. If a user presses the Info key when the TV is in standby mode, the TV is turned on and shows the current time on the screen for 10 seconds and then returns to standby mode. The time is displayed as a digital clock at the normal banner size. The 12 or 24 hour time format is determined according to the format of the Information. If a user presses the Info key when the TV is on, the original Info key function is executed. Detailed Descriptions The SW clock works depending on the On/Off setting in the Factory install menu. If the SW clock is turned on, the Fast logo option is automatically turned off. (In this case, even if you turn the Fast logo option on again, it is automatically turned off when the TV is turned on again.) If the master power is turned off, the time setting is only maintained in models with a backup condenser and an RTC. When a TV in standby mode shows the current time, the video mute and audio mute settings are maintained. In this case, even if the Hotel logo is set to on, the Hotel Logo display is skipped. This feature only works in StandAlone mode. Other key function specifications when the SW clock is running The Info key works like the power key. Pressing the Power or Info key while the SW clock is running, puts the TV into Standby mode. Pressing keys other than the Power and Info keys is ignored while the SW clock is running. In this case, the on timer does not work. The off timer and sleep timer work. When clock mode in the Time menu is set to manual, the time of the sub micom is maintained by the RTC circuit. Even if the current time is not configured, it is displayed in the same way as the menu. (--:--)
[HC460-465-EU]Install-Guide-X0ENG.indd 27 2014-05-21 3:08:28 English 27 Multi Code Remocon Multi Code Remote Control is a special transmitter which is designed to control multiple TVs with one remote. This function is useful when there is more than one TV in one location such as a hospital. The Set ID number will be displayed in the source OSD. It is possible to support up to 9 different remote key transmission for multi code. The initial ID code of each TV is 0. The ID code can be set and reset in Analog TV mode or PC mode. (not available in TTX or DTV channels) The ID code can be from 0 to 9. Press the RETURN + MUTE keys for longer than 7 seconds and the digit key you want to set. The Set ID OSD will be displayed in a central position. The following words will be displayed. The Remote control code is set to x. If you want to change the Remote control code. Enter the digit you want to change. (x is the digit number) This OSD will be displayed until the exit key is pressed. Remote control code is set to 0. If you want to change the Remote control code, enter the chosen digit. For example, the TV and Remote control will be set to ID code #1 if the user presses #1. The following words will be displayed.Remote control code is changed to 1. The TV can then only be controlled by a remote control with the same ID code as the TV. If the ID code between the remote control and the TV does not match, the following words will be displayed. TV ID x (x is the TVs ID) To reset the ID code, press the EXIT + MUTE keys for longer than 7 seconds. The ID codes of both the TV and Remote control will be reset to 0. Remote control code is set to 0. will be displayed. The way to set or reset the ID may differ depending on the remote control. See the table below. Setting the Time OMENU System Time Clock Clock Set The time is entered Press the remote control button to select Clock and set up the time. Setting the Interactive Mode Time If the Hotel System transmits the time information, the time is set automatically. If the Hotel System does not transmit the time information, the time cannot be displayed. If the time is set, the clock will be displayed on the front panel. Time Clock Sleep Timer Off Wake-up Timer Clcok Clock Mode Manual Clock Set Time Zone Auto 28 English
[HC460-465-EU]Install-Guide-X0ENG.indd 28 2014-05-21 3:08:28 Channel Bank Editor (Smoovie TV Only) Channel Bank Editor is a function to edit channels with 3 different Bank Options. Depending on the Bank card, there are specific channels hotel customers can enjoy. Setting the Channel Bank Editor in Stand-alone Mode 1. Enter the Hotel Standalone menu by pressing MUTE+1+1+9+Enter 2. Please select the SI vendor : Smoovie 3. You will be able to see the new menu option Channel Bank Editor 4. Enter Channel Bank Editor Hospitality Mode Standalone System Smoovie SI Vendor SI Vendor Channel OFF d d d Channel Bank Editor
<Depending on the model and region, some menu items may not exist>
5. Edit the channel bank like in the example below. a. Bank1 (Free channel): Select the channel that will be used when the remote control has no card. b. Bank2 (Family Card - Green): Select the channel that will be used when a remote control has a GREEN CARD. c. Bank3 (Adult Card - Red): Select the channel that will be used when a remote has a RED CARD. Channel Bank Edit Bank1 (4) Bank2 (6) Bank3 (36) All 1 1futech 1 BBC1 2 24ore.tv 2 C3 3 BBC World 3 C5 4 Coming Soom 4 S2 c c c c c c c c c c c c c c c c c n Move E Select/Deselect R Return References of using SMOOVIE Remote Controller 1. If you select SMOOVIE as the SI vendor, you should use a SMOOVIE Remote Controller. 2. Using the numeric keys of the remote controller, users can only select Bank1 channels. With this in mind, if you want to change the channel using a Green or Red Card, please use the channel up/down keys. 3. In the Channel guide or Channel list, users can only see the Bank1 channel list. English 29
[HC460-465-EU]Install-Guide-X0ENG.indd 29 2014-05-21 3:08:29 Channel Editor Channel Editor edits channel number a and name. Use Channel Editor to sort the channels as user-desired channel numbers. Hospitality Mode Standalone System SI Vendor OFF Power On Channel Menu OSD Clock Music Mode Remote Jack Pack External Source Bathroom Speaker Eco Solution Logo/Message Cioning REACH Solution Security r Channel Editor
<Depending on model and region, some menu items may not exist>
Simple Steps for channel Editor under Stand-alone Mode Step 1 2 3 4 5 Broad Outline Operate Channel Auto Store in the Hotel Option Menu Enter Channel Editor in the Hotel Option Menu Compile a table related to the final channel lists you want Rearrange channels with TOOLS button based on the table you compiled Press the EXIT or RETURN Button to exit.
<For better comprehension, please refer to the following details>
30 English
[HC460-465-EU]Install-Guide-X0ENG.indd 30 2014-05-21 3:08:29 My Channel If you select the genre that not added any channels, the Channel list displays all of the available channels. Determines the country and genre for the channels provided by the hotel, and if the user selects a country and genre, shows the corresponding channels. You must select the country first, or you cannot set a genre. My Channel works in Standalone mode only. SI Vendor in Standalone mode: This does not work if Smoovie is selected. This is in the Hotel Options in the Hotel Menu -> Service Mode and can be turned on or off. This option only works when it is set to On. Channel Composition [Genre Mode]
Antenna Mode Activation Air/Cable Satellite(HC675) Description O O O O O O O O O O O O Provide genre channel mode by each country that master has managed in factory mode. Standard Category Hotel Genre Ch. Mode All (Default) News Radio Entertainment Sport Hotel My Channel Current status All Country / All Country Genre Austria Belgium China Denmark Finland France All News Radio Entertainment Sports Hotel OK Cancel
* For the number of items to be displayed in the list, refer to the design document.
} Keep Previous n Move E Enter Key Guide Button BLUE ENTER Ch. Up/Down UP/DOWN RIGHT RETURN EXIT Action Returns to the screen. (Genre setup: Last Country & Genre) Selects an item. Move the highlight by page. Navigates the each country, genre list. (in a circular manner.) Selects the highlighted item, and then move the highlight to Genre section. Returns to the screen. (Genre setup: Last Country & Genre) Returns to the screen. (Genre setup: Last Country & Genre) Nav. Help Keep Previous Enter
(No Guide) Move
(No Guide)
(No Guide)
[HC460-465-EU]Install-Guide-X0ENG.indd 31 2014-05-21 3:08:30 English 31 Notes This section describes the layout of the Front UI that appears when the TV is turned on. (Factory Mode > Genre Mode: Enable) The genre is a sub-list for each country. The broadcast screen that was being displayed the last memorial channel. If user want to keep the previous country & genre channel map, press the BLUE, RETURN, and EXIT remote-
control key to close the Front UI. Etc. Default Highlight : Last Memory items (Country, Genre) Timeout (60 sec) Elements No Name Description 1 2 3 4 5 6 7 8 Background Screen Displays the last memorized channel that appears when TV is turned on. Function Title Current Status Country Items Genre Items Highlight Indicator Nav. Help This is name of the function. Display current settings the Country/Genre. The item for the country list is displayed. Displays the last selected country. The item for the genre list is displayed. Displays available genre items by each country that master managed in factory mode. (always provide All item) Displays the last selected genre. If the item title is too long to be displayed within the area, Auto Text Sliding works. This is displayed when there is a previous or next page. The key guide is right-aligned. 32 English
[HC460-465-EU]Install-Guide-X0ENG.indd 32 2014-05-21 3:08:30 Highlight Interaction [Country Items]
This page is only to indicate possible interactions. It may not be exactly identical to actual screens. Notes Users can navigate the items in each country & genre list by pressing the up or down remote control keys. Circular navigation is supported. DOWN Current status All Country / All Country Genre My Channel OK Cancel UP 1 My Channel Current status All Country / All Country Genre All Country Austria Belgium China Denmark Finland All News Radio Entertainment Sports Hotel
} Keep Previous n Move E Enter DOWN UP END My Channel Current status All Country / All Country Genre South Korea Spain Sweden Turkey UK USA All News Radio Entertainment Sports Hotel OK Cancel
} Keep Previous n Move E Enter All Country Austria Belgium China Denmark Finland All News Radio Entertainment Sports Hotel OK Cancel
} Keep Previous n Move E Enter UP x 5 DOWN x 5 My Channel Current status All Country / All Country Genre Austria Belgium China Denmark Finland France All News Radio Entertainment Sports Hotel OK Cancel
} Keep Previous n Move E Enter UP DOWN My Channel Current status All Country / All Country Genre Belgium China Denmark Finland France Germany All News Radio Entertainment Sports Hotel OK Cancel
} Keep Previous n Move E Enter UP x N DOWN x N My Channel Current status All Country / All Country Genre South Korea Spain Sweden Turkey UK USA All News Radio Entertainment Sports Hotel OK Cancel
} Keep Previous n Move E Enter English 33
[HC460-465-EU]Install-Guide-X0ENG.indd 33 2014-05-21 3:08:30 Highlight Interaction [Default Genre]
This page is only to indicate possible interactions. It may not be exactly identical to actual screens. My Channel Current status All Country / All Country Genre ENTER / RIGHT Current status All Country / All Country Genre My Channel All Country Austria Belgium China Denmark Finland All News Radio Entertainment Sports Hotel OK Cancel LEFT All Country Austria Belgium China Denmark Finland All News Radio Entertainment Sports Hotel OK Cancel
} Keep Previous n Move E Enter
} Keep Previous n Move E Enter The current selection of the country is high-lighted. Default High-light: The current selection of the genre. My Channel Current status All Country / All Country Genre Austria Belgium China Denmark Finland France All News Radio Entertainment Sports Hotel OK Cancel ENTER / RIGHT LEFT My Channel Current status All Country / All Country Genre Austria Belgium China Denmark Finland France All News Radio Entertainment Sports Hotel OK Cancel
} Keep Previous n Move E Enter
} Keep Previous n Move E Enter Seems source error, it should be read as "The other item of the county is high-lighted.". Please verify. (ex. France) Default Highlight : All 34 English
[HC460-465-EU]Install-Guide-X0ENG.indd 34 2014-05-21 3:08:31 Mode Change Interaction 1 (1/2) This page is only to indicate possible interactions. It may not be exactly identical to actual screens. My Channel Current status All Country / All Country Genre All Country Austria Belgium China Denmark Finland All News Radio Entertainment Sports Hotel OK Cancel DOWN LEFT My Channel Current status All Country / All Country Genre All Country Austria Belgium China Denmark Finland All News Radio Entertainment Sports Hotel OK Cancel Current Genre Mode : All Country / Sports
} Keep Previous n Move E Enter
} Keep Previous n Move E Enter ENTER / RIGHT My Channel Current status All Country / All Country Genre My Channel Current status All Country / All Country Genre ENTER All Country Austria Belgium China Denmark Finland All News Radio Entertainment Sports Hotel OK Cancel UP DOWN All Country Austria Belgium China Denmark Finland All News Radio Entertainment Sports Hotel OK Cancel
} Keep Previous n Move E Enter
} Keep Previous n Move E Enter If the country is selected, highlight moves to genre menu automatically. ENTER / RIGHT 6
[HC460-465-EU]Install-Guide-X0ENG.indd 35 2014-05-21 3:08:31 English 35 Mode Change Interaction 1 (2/2) This page is only to indicate possible interactions. It may not be exactly identical to actual screens. 5 My Channel Current status All Country / All Country Genre All Country Austria Belgium China Denmark Finland All News Radio Entertainment Sports Hotel OK Cancel 1 6 My Channel Current status All Country / All Country Genre All Country Austria Belgium China Denmark Finland All News Radio Entertainment Sports Hotel OK Cancel
} Keep Previous n Move E Enter
} Keep Previous n Move E Enter The genre mode change complete message is displayed. Timeout(5 sec.) Pressing the left key from the genre to country menu highlights an existing selected country item. ENTER / RETURN / Timeout Genre Mode changed to Aistria / News. 36 English
[HC460-465-EU]Install-Guide-X0ENG.indd 36 2014-05-21 3:08:31 Mode Change Interaction 2 (1/2) This page is only to indicate possible interactions. It may not be exactly identical to actual screens. 1 My Channel Current status All Country / All Country Genre All Country Austria Belgium China Denmark Finland All News Radio Entertainment Sports Hotel OK Cancel DOWN X 6 UP X 6 My Channel Current status All Country / All Country Genre Austria Belgium China Denmark Finland France All News Radio Entertainment Sports Hotel OK Cancel
} Keep Previous n Move E Enter
} Keep Previous n Move E Enter Current Genre Mode : All Country / Sports ENTER / RIGHT 5 Genre Mode Keep All Country / All. My Channel Current status All Country / All Country Genre BLUE
/
RETURN
/
EXIT Austria Belgium China Denmark Finland France All News Radio Entertainment Sports Hotel OK Cancel
} Keep Previous n Move E Enter Current Genre Mode : All Country / Sports If the country is selected, highlight moves to genre menu automatically.
[HC460-465-EU]Install-Guide-X0ENG.indd 37 2014-05-21 3:08:31 English 37 Power On Scenario [Last Memory]
This page is only to indicate possible interactions. It may not be exactly identical to actual screens. 1 Genre Mode changed to Aistria / News. POWER Power O Current Genre Mode : Austria / News POWER Genre Mode changed to Aistria / News. Current Genre Mode : Austria / News 38 English
[HC460-465-EU]Install-Guide-X0ENG.indd 38 2014-05-21 3:08:32 Genre Editor Country and Genre selection can be done in channel list Menu. Pressing Red Key enables country sub list, here viewer can scroll down and select country of choice. Genre selection can be done using Left/right key i.e scrolling horizontally in channel list menu. If viewer wants to change Genre or country in TV On state, it can be done using this feature. Channel Genre Edit Registered News Radio Entertainment Sports Hotel 0 C67 1 C--
2 C78 b Select All Items On Column { Deselect All Items On Column E Select R Return An editor to set genre for each Hotel TV channel. Stored channels can be added to a particular genre in genre editor menu. A channel can belong to multiple genres. Genre Options available are : News, Radio, Entertainment, Sport, and Hotel. Genre selection can be done either on Mychannel FrontUI or in Channel List. This feature sorts out channels of particular genre in a list. Guest can select genre of his choice and select channel by scrolling down sorted list.
[HC460-465-EU]Install-Guide-X0ENG.indd 39 2014-05-21 3:08:32 English 39 Mixed Channel Map The Mixed Channel Map function mixes Air, Cable and Satellite channels The Mixed Channel Map function should be ON in order to mix Air, Cable and Satellite channels. Use the Channel Editor to sort the channels after turning on the 'Mixed Channel Map' function in the Hotel Option Menu Sound Bar Samsung Sound-Bar & Hospitality TV in 2014 Use Samsung Sound-Bar & hospitality TV support HDMI 1.4 to listen to TV sound on the Sound-Bar by using a single HDMI cable. Supporting model. Sound-Bar : HW-F350/F450/F550 The Hotel mode operation from the Sound Bar The following TV hotel options should be set in advance. Hotel option Power On Power ON Volume = "Enable" / Power ON Vol / Max Vol Hotel option External Device Sound Bar Out = "On"
Connect an HDMI cable from the HDMI OUT port of the Sound-BAR to the HDMI1 port of the hospitality TV. After being connected to the 2014 hospitality TV via an HDMI Cable, the Sound-Bar automatically detects the TV while it turns on, and is converted to hotel mode by itself. The change of the power-on volume & max volume on the TV is applied to the connected sound-bar since the TV boots twice . Features of "Hotel Mode" in Sound Bar Synchronized power on/off with the TV. HDMI_CEC enabled. Accessible HDMI OUT port only. (Other inputs are disabled) Synchronized power-on&max volume with the TV. (The Sound-Bars volume is set to half that of the TV) Adjustable power-on&max volume acquired from the TVs hotel option menu. (Sound-Bar volume=TV volume/2) Ex.) If the volume settings on the TV are power-on volume=20 and max volume=90, the Sound bar will work as power-on volume=10, max volume=45.
*This function may differ depending on the model. 40 English
[HC460-465-EU]Install-Guide-X0ENG.indd 40 2014-05-21 3:08:32 Installing the Wall Mount The wall mount kit (sold separately) allows you to mount the TV on the wall. For detailed information on installing the wall mount, see the instructions provided with the wall mount. Contact a technician for assistance when installing the wall mount bracket. We do not advise you to do it yourself. Samsung Electronics is not responsible for any damage to the product or injury to yourself or others if you select to install the TV on your own. Wall Mount Kit Specifications (VESA) The Wall mount kit is not supplied but sold separately. Install your wall mount on a solid wall, perpendicular to the floor. When attaching to other building materials, please contact your nearest dealer. If installing on a ceiling or slanted wall, it may fall and result in severe personal injury. NOTE Standard dimensions for wall mount kits are shown in the table below. When purchasing our wall mount kit, a detailed installation manual and all parts necessary for assembly are provided. Do not use screws that do not comply with VESA standard screw specifications. Do not use screws longer than the standard dimensions, as they may cause damage to the inside of the TV set. For wall mounts that do not comply with the VESA standard screw specifications, the length of the screws may differ depending on their specifications. Do not fasten the screws too tightly. This may... damage the product or cause the product to fall, leading to personal injury. Samsung is not liable for these kinds of accidents. Samsung is not liable for product damage or personal injury when a non-VESA or non-specified wall mount is used or the consumer fails to follow the product installation instructions. Do not exceed a 15 degrees tilt when mounting this TV. TV size in inch 40 inches VESA screw hole specs (A * B) in millimeters 200 x 200 48 inches 200 x 200 Standard Screw Quantity M8 4 Do not install your Wall Mount Kit while your TV is turned on. It may result in personal injury due to electric shock.
[HC460-465-EU]Install-Guide-X0ENG.indd 41 2014-05-21 3:08:32 English 41 Securing the TV to the Wall
[ Caution: Pulling, pushing, or climbing onto the TV may cause the TV to fall. In particular, ensure that your children do not hang over or destabilize the TV; doing so may cause the TV to tip over, resulting in serious injuries or death. Follow all safety precautions provided on the included Safety Flyer. For added stability, install the anti-fall device for safety purposes, as follows. To avoid the TV from falling 1. Put the screws into the clamps and firmly fasten them onto the wall. Confirm that the screws have been firmly installed onto the wall. You may need additional material, such as an anchor, depending on the type of wall. Since the necessary clamps, screws, and string are not supplied, please purchase these additionally. 2. Remove the screws from the centre back of the TV, put the screws into the clamps, and then fasten the screws onto the TV again. Screws may not be supplied with the product. In this case, please purchase the screws of the following specifica-
tions. 3. Connect the clamps fixed onto the TV and the clamps fixed onto the wall with a strong string and then tie the string tightly. NOTE Install the TV near to the wall so that it does not fall backwards. It is safe to connect the string so that the clamps fixed on the wall are equal to or lower than the clamps fixed on the TV. Untie the string before moving the TV. 4. Verify that all connections are properly secured. Periodically check connections for any sign of fatigue for failure. If you have any doubt about the security of your connections, contact a professional installer. Anti-theft Kensington Lock The Kensington Lock is not supplied by Samsung. It is a device used to physically fix the system when using it in a public place. The appearance and locking method may differ from the illustration, depending on the manufacturer. Refer to the manual provided with the Kensington Lock for additional information on proper use. To lock the product, follow these steps:
Please find the K icon on the rear of the TV. A kensington slot is beside the K icon. 1. Wrap the Kensington lock cable around a large, stationary object such as desk or chair. 1
<Optional>
2. Slide the end of the cable with the lock attached through the looped end of the Kensington lock cable. 3. Insert the locking device into the Kensington slot on the product (1). 4. Lock the lock. These are general instructions. For exact instructions, see the User manual supplied with the locking device. The locking device has to be purchased separately. The location of the Kensington Lock may be different depending on the model. 42 English
[HC460-465-EU]Install-Guide-X0ENG.indd 42 2014-05-21 3:08:32 TV System Audio out Input Items Speaker out PC A/V HDMI Antenna RJP DATA Operating temperature Operating Humidity Storage Temperature Storage Humidity Comment Specifications Specification DVB-TC, DTMB, PAL, DVB-T2C 40 inch / 48 inch : 10W X 2 D-sub, Audio-L/R Audio Video Jack Compatible with the HDMI Specifications 75 ohm Unbalanced, Din Jack , F Jack RS232 10C ~ 40C (50F ~ 104F) 10% ~ 80%
-20C ~ 45C (-4F ~ 113F) 5% ~ 95%
non-condensing non-condensing Design and specifications are subject to change without prior notice. For information about the power supply, and more information about the power consumption, refer to the label at-
tached to the product. The above specifications may differ depending on the model.
[HC460-465-EU]Install-Guide-X0ENG.indd 43 2014-05-21 3:08:32 English 43 Supported Video Formats File Extention Container Video Codec Resolution Frame rate(fps) Bit rate(Mbps) Audio Codec
*.avi / *.mkv
*.asf / *.wmv
*.mp4 / *.3gp
*.vro / *.mpg
*.mpeg / *.ts
*.tp / *.trp
*.mov / *.flv
*.vob / *.svi
*.divx AVI MKV ASF MP4 3GP MOV FLV VRO VOB PS TS
*.webm WebM Other Restrictions DivX 3.11/4.x/5.x/6.x MPEG4 SP/ASP H.264 BP/MP/HP Motion JPEG Window Media Video v9 MPEG2 MPEG1 VP8 1920 x 1080 640 x 480 1920 x 1080 6~30 30 8 30 20 AC3 LPCM ADPCM
(IMA, MS) AAC HE-AAC WMA DD+
MPEG (MP3) DTS (Core) G.711(A-Law,
-Law) Vorbis Video content will not play, or not play correctly, if there is an error in the content or the container. Sound or video may not work if the contents have a standard bit rate/frame rate above the compatible Frame/sec listed in the table. If the Index Table is in error, the Seek (Jump) function is not supported. Some USB/digital camera devices may not be compatible with the player. The menu can be displayed late if the video is over 10Mbps(bit rate). Video decoder Audio decoder Supports up to H.264, Level 4.1 (FMO/ASO/RS are not supported.) frame rate :
Below 1280 x 720: 60 frame max Above 1280 x 720: 30 frame max WMA 10 Pro supports up to 5.1 channel and M2 profile. WMA lossless audio is not supported. Vorbis supports up to 2ch. DD+ supports up to 5.1 channel. VC1 AP L4 is not supported. GMC is not supported. Supported Subtitle Formats External Name MPEG-4 timed text SAMI SubRip SubViewer Micro DVD SubStation Alpha Advanced SubStation Alpha Powerdivx File extension
.ttxt
.smi
.srt
.sub
.sub or .txt
.ssa
.ass
.psb Internal Name Xsub SubStation Alpha Advanced SubStation Alpha SubRip MPEG-4 timed text Container ormat AVI MKV MKV MKV MP4 Picture Format Text Format Text Format Text Format Text Format Supported Photo Formats Supported Music Formats File Extension
*.jpg
*.jpeg
*.bmp
*.mpo Type JPEG BMP MPO Resolution 15360 X 8640 4096 X 4096 15360 X 8640 File Extension Type Codec Remark
*.mp3
*.m4a
*.mpa
*.aac
*.flac
*.ogg
*.wma
*.wav
*.mid
*.midi MPEG MPEG1 Audio Layer 3 MPEG4 AAC FLAC OGG WMA wav midi FLAC Vorbis WMA wav midi Can support up to 2channel Can support up to 2channel WMA 10 Pro supports up to 5.1 channel and M2 profile.
(WMA lossless audio is not supported.) Can not support seeking 44 English
[HC460-465-EU]Install-Guide-X0ENG.indd 44 2014-05-21 3:08:32 Contact SAMSUNG WORLD WIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre. Country AUSTRIA BELGIUM BOSNIA BULGARIA CROATIA CZECH DENMARK FINLAND FRANCE GERMANY CYPRUS GREECE HUNGARY ITALIA LUXEMBURG MONTENEGRO SLOVENIA NETHERLANDS NORWAY POLAND PORTUGAL ROMANIA SERBIA SLOVAKIA SPAIN SWEDEN SWITZERLAND Customer Care Centre 0800 - SAMSUNG (0800 - 7267864) 02-201-24-18 051 331 999 07001 33 11 , sharing cost 062 726 786 800 - SAMSUNG (800-726786) Samsung Electronics Czech and Slovak, s.r.o. V Parku 2343/24, 148 00 - Praha 4 70 70 19 70 030-6227 515 01 48 63 00 00 0180 6 SAMSUNG bzw. 0180 6 7267864*
[HHP] 0180 6 M SAMSUNG bzw.
(*0,20 /Anruf aus dem dt. Festnetz, aus dem Mobilfunk max. 0,60 /Anruf) 8009 4000 only from landline, toll free 80111-SAMSUNG (80111 726 7864) only from land line
(+30) 210 6897691 from mobile and land line 0680SAMSUNG (0680-726-786) 0680PREMIUM (0680-773-648) 800-SAMSUNG (726-7864)
[HHP] 800.Msamsung (800.67267864) 261 03 710 020 405 888 080 697 267 090 726 786 0900-SAMSUNG (0900-7267864) ( 0,10/Min) 815 56480 0 801-172-678* lub +48 22 607-93-33 **
[HHP] 0 801-672-678* lub +48 22 607-93-33**
*(cakowity koszt poczenia jak za 1 impuls wedug taryfy operatora)
** (koszt poczenia wedug taryfy operatora) 808 20 7267 08008 SAMSUNG (08008 726 7864) TOLL FREE No. 011 321 6899 0800 - SAMSUNG (0800-726 786) 0034902172678
[HHP] 0034902167267 0771 726 7864 (SAMSUNG) 0848 726 78 64 (0848-SAMSUNG) Web Site www.samsung.com/at/support www.samsung.com/be/support (Dutch) www.samsung.com/be_fr/support (French) www.samsung.com/support www.samsung.com/bg/support www.samsung.com/hr/support www.samsung.com/cz/support www.samsung.com/dk/support www.samsung.com/fi/support www.samsung.com/fr/support www.samsung.com/de/support www.samsung.com/gr/support http://www.samsung.com/hu/support www.samsung.com/it/support www.samsung.com/support www.samsung.com/support www.samsung.com/si/support www.samsung.com/nl/support www.samsung.com/no/support www.samsung.com/pl/support www.samsung.com/pt/support www.samsung.com/ro/support www.samsung.com/rs/support www.samsung.com/sk/support www.samsung.com/es/support www.samsung.com/se/support www.samsung.com/ch/support (German) www.samsung.com/ch_fr/support (French) www.samsung.com/uk/support www.samsung.com/ie/support www.samsung.com/lt/support www.samsung.com/lv/support www.samsung.com/ee/support www.samsung.com/tr/support U.K EIRE LITHUANIA LATVIA ESTONIA TURKEY 2014 Samsung Electronics Co., Ltd. All rights reserved. 0330 SAMSUNG (7267864) 0818 717100 8-800-77777 8000-7267 800-7267 444 77 11
[HC460-465-EU]Install-Guide-X0ENG.indd 45 2014-05-21 3:08:32
1 | label | ID Label/Location Info | 287.97 KiB |
ae aan aa 85 CHALLENGER ROAD, RIDGEFIELD PARK N.J.07660-2112, U.S.A. Model / MODELE NO / Modelo: HG4ONC460KF DIST BY SAMSUNG ELECTRONICS CANADA INC. Type No.: HG40NC460 56 Standish Court Mississ auga, Ontario L6R 4B2 Canada USAICANADA : AC110-120V~ 50/60Hz 70W Typical power: 20W MEXICO: 110-127V c.a.~ 50/60Hz 70W CANICES-3 (B) /NMB-3 (8) Standard Television Receiving Apparatus Apparell de rception tlvision ordinaire, Canada BETS7 / NTVR-7 MFD./FABRIQUE/MANUFACTURADO : MAY 2014 FCC ID: A3LHG40NC460 This device conplies with part 15 of the FOCRUes Cc us
(herationis subjectto the flloningtwo condtions:
(this device may not cause harm interference LISTED ard (his device mustacceptary interference received. including interference that may cause undesired operation. Television Receiver MADE IN TIANJIN CHINA(TSEC) T0FJ FABRIQUE AU TIANJIN CHINE(TSEC) NYCE
[cauTion ]
A tel /|
ARE KAAKERERET
| Code : HG40NC460KFXZA yn No: XXXX Serie No:
ee 2 WARNING : TO PREVENT FIRE OR SHOCK HAZARD 3 DO NOT EXPOSE THIS UNIT TO RAINOR MOISTURE |=
ANE manie RE AURA RS FATANIE UF maaninmin Versic z G
1 | ACB-Form-FCC-Application-Letters | Cover Letter(s) | 83.61 KiB |
Samsung Electronics Co., Ltd. 416 Maetan 3-Dong,Yeongtong-Gu,Suwon-Si, Gyeonggi-Do, 443-742 Republic of Korea Request for Confidentiality Date: ___2014-05-12___ Subject: Confidentiality Request for: _ A3LHG40NC460 __ Pursuant to FCC 47 CRF 0.457(d) and 0.459 and IC RSP-100, Section 10, the applicant requests that a part of the subject FCC application be held confidential. Type of Confidentiality Requested Short Term Short Term Short Term Short Term Short Term Short Term Short Term Short Term Short Term Permanent Permanent*1 Inte Permanent Permanent Permanent Tune-Up Permanent Permanent*
Exhibit Block Diagrams External Photos rnal Photos Procedure Schematics Test Setup Photos Users Manual Operation Description/Theory of Operation Parts List & Placement/BOM
*Note: ______(Insert Explanation as Necessary)______ ____ Samsung Electronics Co., Ltd. _____ has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to "competition" would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. Permanent Confidentiality:
The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. Short-Term Confidentiality:
The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of ___ days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Applicant is also aware that they are responsible to notify ACB in the event information regarding the product or the product is made available to the public. ACB will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-1705. NOTE for Industry Canada Applications:
The applicant understands that until such time that IC distinguishes between Short Term and Permanent Confidentiality, either type of marked exhibit above will simply be marked Confidential when submitted to IC. Sincerely, By: _ Peter Ra, Manager __
(Print name)
(Signature/Title2) 1 - The asterisked items (*) require further justification before permanent confidentiality will be allowed. These also currently require review by the FCC under their Permit-But-Ask policy before the grant is issued and can delay completion of an application. Further justification should be added to the note above. One such example for a potted device would be: The EUT is FULLY potted using a non-removable epoxy based material. Removal of potting material causes irreparable damage to internal circuitry. See photographs exhibits that outline the device before and after potting. 2 - Must be signed by applicant contact given for applicant on the FCC site, or by the authorized agent if an appropriate authorized agent letter has been provided. Letters should be placed on appropriate letterhead.
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2014-05-26 | JBP - Part 15 Class B Computing Device Peripheral | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2014-05-26
|
||||
1 | Applicant's complete, legal business name |
Samsung Electronics Co Ltd
|
||||
1 | FCC Registration Number (FRN) |
0005810205
|
||||
1 | Physical Address |
19 Chapin Rd., Building D
|
||||
1 |
Pine Brook, 07058
|
|||||
1 |
United States
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
h******@acbcert.com
|
||||
1 | TCB Scope |
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
A3L
|
||||
1 | Equipment Product Code |
HG40NC460
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
J******** C****
|
||||
1 | Title |
General Manager
|
||||
1 | Telephone Number |
973-8********
|
||||
1 | Fax Number |
973-8********
|
||||
1 |
j******@samsung.com
|
|||||
app s | Technical Contact | |||||
1 | Firm Name |
China Samsung Quality Assurance Laboratory
|
||||
1 | Name |
X**** L****
|
||||
1 | Physical Address |
Wei 4 Road,Microelectronics Industrial Park
|
||||
1 |
Tianjin
|
|||||
1 |
China
|
|||||
1 | Telephone Number |
022-2******** Extension:
|
||||
1 |
x******@samsung.com
|
|||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | JBP - Part 15 Class B Computing Device Peripheral | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | LED TV | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Grant Comments | Maximum Resolution: 1366x768 @60Hz | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
CHINA SAMSUNG QUALITY ASSURANCE LABORATORY
|
||||
1 | Name |
Z****** G****
|
||||
1 | Telephone Number |
86-22******** Extension:
|
||||
1 |
z******@samsung.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15B | 19 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC