all | frequencies |
|
|
|
|
|
|
|
exhibits | applications |
---|---|---|---|---|---|---|---|---|---|---|
manuals | photos | label |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 2 3 |
|
Users Manual 1a | Users Manual | 3.79 MiB | March 28 2006 | |||
1 2 3 |
|
Users Manual 1b | Users Manual | 2.14 MiB | March 28 2006 | |||
1 2 3 |
|
Users Manual 2 | Users Manual | 99.42 KiB | March 28 2006 | |||
1 2 3 |
|
Antenna Location Photos | Internal Photos | 289.99 KiB | July 25 2006 | |||
1 2 3 |
|
Internal Photos | Internal Photos | 3.85 MiB | March 28 2006 | |||
1 2 3 |
|
External Photos | External Photos | 1.14 MiB | March 28 2006 | |||
1 2 3 |
|
ID Label | ID Label/Location Info | 117.63 KiB | March 28 2006 | |||
1 2 3 |
|
Antenna Spec | Parts List/Tune Up Info | 1.11 MiB | July 25 2006 | |||
1 2 3 |
|
Class II change letter | Cover Letter(s) | 110.08 KiB | July 25 2006 | |||
1 2 3 | Test Report | July 25 2006 | ||||||
1 2 3 |
|
Power of Attorney Letter | Cover Letter(s) | 101.59 KiB | July 25 2006 | |||
1 2 3 | RF Exposure Info | July 25 2006 | ||||||
1 2 3 | RF Exposure Info | July 25 2006 | ||||||
1 2 3 | RF Exposure Info | July 25 2006 | ||||||
1 2 3 | RF Exposure Info | July 25 2006 | ||||||
1 2 3 | RF Exposure Info | July 25 2006 | ||||||
1 2 3 |
|
TCB Q and A | Cover Letter(s) | 62.44 KiB | July 25 2006 | |||
1 2 3 | Test Setup Photos | July 25 2006 | ||||||
1 2 3 |
|
Antenna Foxconn | Parts List/Tune Up Info | 459.43 KiB | March 28 2006 | |||
1 2 3 |
|
Antenna KAE | Parts List/Tune Up Info | 1.11 MiB | March 28 2006 | |||
1 2 3 |
|
Authorization Letter | Cover Letter(s) | 101.59 KiB | March 28 2006 | |||
1 2 3 | Block Diagram System | Block Diagram | March 28 2006 | confidential | ||||
1 2 3 | Block Diagram WLAN | Block Diagram | March 28 2006 | confidential | ||||
1 2 3 | Operational Description | Operational Description | March 28 2006 | confidential | ||||
1 2 3 |
|
Request for Confidentiality | Cover Letter(s) | 69.80 KiB | March 28 2006 | |||
1 2 3 | RF Exposure Info | March 28 2006 | ||||||
1 2 3 | RF Exposure Info | March 28 2006 | ||||||
1 2 3 | RF Exposure Info | March 28 2006 | ||||||
1 2 3 | RF Exposure Info | March 28 2006 | ||||||
1 2 3 | RF Exposure Info | March 28 2006 | ||||||
1 2 3 | Schematics System | Schematics | March 28 2006 | confidential | ||||
1 2 3 | Schematics WLAN | Schematics | March 28 2006 | confidential | ||||
1 2 3 | Test Report | March 28 2006 | ||||||
1 2 3 |
|
Antennan Foxconn | Parts List/Tune Up Info | 459.42 KiB | March 28 2006 |
1 2 3 | Users Manual 1a | Users Manual | 3.79 MiB | March 28 2006 |
Users Guide 1 Product Features a Small but Strong UMPC (Ultra Mobile PC) Intel Celeron M ULV Processor 256MB~Up To 1GB DDR2 Memory 1.8", 20~60GB High-Capacity Hard Disk Drive 7" WVGA TFT LCD Basic Resolution of 800x480 Pixels, Maximum Resolution of 2048x1536 Pixels
(when an external display is connected) Auto Scaler (Automatic Resolution Adjustment) Function to Support High Resolution Output Easy-to-Use Touch Screen usable with your fingers. Microsoft Windows XP Tablet PC Edition Resolve PDA and Pocket PC restrictions Usability Similar to a Normal PC with Windows Powerful Multimedia Functions Various Multimedia Programs Such as AVStation etc. 2 Built-in Array Microphones for Higher Audio Recording Quality SRS Surround Sound Multiple Network Support Wired LAN, Wireless LAN, Bluetooth (Optional) Resolves Space Restrictions through the Wireless Communication Function Compact, Light-Weight Design for Portability / Polished Design A mere 779g (Without the Bluetooth modules) High-Gloss Front Panel Optional Accessories for Additional Convenience USB Data Cable Enabling Data Exchange with another PC. USB External ODD, Ultra-Slim USB External Keyboard Power Bank to Extend Use Time Product Features 2 Using Your Document Congratulations on your purchase of a notebook computer with the Windows XP operating system. Whether you are new to using a portable computer or are an experienced user, this users manual can help you get the most from your computer. Manual Documentation Conventions Information Icons Three icons and their associated messages appear in this manual. The information icons are placed before the step/information they apply to:
Warning:
Indicates the possibility of personal injury. Caution:
Warns you of possible damage to equipment or data. Note:
Informs you of special circumstances. Technical Information:
Informs you of special requirements or limitations for use of item(s). Keyboard Conventions Keys that you need to press to perform certain functions are displayed in the manual in brackets. For example:
<Ctrl> indicates the control key (Ctrl on the keyboard). If you need to press two keys at the same time, the key names are shown joined by a plus sign. For example:
<Fn+F8> means that you should press the Fn key and hold it and then press the F8 key. CD-ROM Device Naming Convention In many installation programs you will have to get a program from the CD-ROM device. The program installation sequence assumes that the CD is drive d:
, however this is not always the case. The name of the CD-ROM drive is the letter following the letter assigned to your last HDD. For instance, if you have one HDD with two partitions, the HDD is drives C: and D: and the CD-ROM drive is then drive E. Using Your Document 3 Some devices and software may differ from the descriptions in the User's guide or may not be supplied with the product depending on your computer model. The actual appearance of the computer may differ from the pictures printed on the cover and in the User's guide. This manual describes procedures with both the Stylus Pen and Mouse.
'Single-Click' in this manual also means 'Single-tap' for the Stylus Pen. Software User Documentation Your computer is shipped from the factory with several software programs installed. The software may include its own online or printed documentation. Refer to the documentation or the Help options in the software for more information. The figures and illustrations in this manual may not be identical to those on your system. General Icon Note:
Some of the Icons used in Windows XP may be placed on the taskbar by selecting (ex:
Place the volume icon in the taskbar) in the properties dialog box. Using Your Document 4 Contents Product Features Using Your Document Manual Documentation Conventions Contents Chapter 1. Getting Started Overview Front View / Status Indicators Top View Right View Left View Rear View Turning the Computer On and Off To turn on the computer To turn off the computer Chapter 2. Using the Computer Stylus Pen Entering Text Using the Tablet PC Input Panel Dialkeys Volume Control Using the Buttons The Menu Button The Quick Launch Button The Auto Scaler Button CF Card Slot Connecting a Monitor Connecting a Monitor Viewing on a Monitor Dual View 2 3 3 5 8 8 9 10 10 11 12 12 12 14 16 16 19 20 21 21 22 24 25 27 27 27 28 Chapter 3. Introducing Windows About Microsoft Windows XP Get Going with Tablet PC Tablet PC Tutorials Reinstalling Windows XP The Windows XP Screen Layout Desktop Understanding the Start Menu Understanding a Window Control Panel Opening the Control Panel User Account Changing the Resolution and Colors 31 31 32 32 33 33 34 35 36 36 37 39 Chapter 4. Connecting to the Internet Connecting Through a Wired LAN 41 Connecting Through a Wireless LAN 43 Wireless Network Setup Using the Wireless LAN Setup Program 48 Using Samsung Network Manager 49 Using the Network 49 Using the network after moving location 52 Sharing Internet Access 53 56 Network Status Diagnosis 57 Using Bluetooth Devices 57 Bluetooth Software Setup Using Bluetooth 60 Contents 5 Chapter 5. Using Applications Introducing Programs Using Samsung Update Plus Program Launcher Program Launcher Screen Layout Using Program Launcher Using AVStation premium Start and Screen Layout MUSIC Station PHOTO Station MOVIE Station Using AVStation NOW /
AVStation Viewer Start / Exit AVStation NOW Start / Exit AVStation Viewer Screen Layout MUSIC Station MOVIE Station CyberLink PowerDVD Voice Recorder Recording 65 67 69 69 70 71 71 72 74 78 82 82 83 84 85 87 89 91 91 Chapter 6. Customizing Your Computer Using System Setup Starting System Setup System Setup Screen Setting a Booting Password Changing the Booting Priority Using the Battery Removing and Attaching Battery Charging the Battery Monitoring the Battery Charge Extending the Battery Usage Time Tips for Using Your Computer 94 94 95 97 100 101 101 101 102 104 107 108 Travelling with Your Computer Handling Spills 108 Storing the Computer for Long Periods 108 Chapter 7. Troubleshooting / Appendix 110 111 112 115 117 117 118 118 Using Magic Doctor Using Norton AntiVirus Restoring the System Reinstalling Software Reinstalling Windows XP Questions and Answers Running the System Recovery Media Quick Installation Standard Installation Installing Windows When You Cannot Run Windows Windows Related Display Related Sound Related Wired LAN Related Wireless LAN Related Games and Programs Related Security Center Other 120 121 121 121 123 124 125 129 131 133 134 System Specification 134 Wireless LAN Specification (Optional) 135 136 138 142 Abbreviations Glossary Index Specifications Contents 6 Chapter 1. Getting Started Overview Front View / Status Indicators Top View Right View Left View Rear View Turning the Computer On and Off To turn on the computer To turn off the computer 8 8 9 10 10 11 12 12 12 7 Overview Before You Start!
An item marked with (*) may be replaced by another item or may not be supplied with your computer depending on the model. The actual appearance and color of the contents may differ from the pictures used in the material. Front View / Status Indicators z LCD x Speaker(L) c Joystick v Auto Scaler Button x Speaker(R)
. Quick Launch Button
, Enter Button m Menu Button b Status Indicators n Microphone z LCD x Speaker c Joystick The screen images from the computer are displayed here. Used to generate sound. Plays the same role as the direction keys ( , , , ) on the keyboard. Used as a joystick when playing games. v Auto Scaler Button (Automatic Resolution Adjustment Button) Press this button to change the screen resolution. Auto Scaler provides 3-step resolutions. Whenever you press this button, the screen resolution changes to 800x480 Default Resolution > 800x600 > 1024x600 sequentially. (Page 32) b Status Indicators Shows the operating status of the computer. The corresponding operating LED is lit when the corresponding function operates. (Page 17) n Microphone Used to record sound. (Page 104) m Menu Button
, Enter Button
. Quick Launch Button Press this button to launch the Menu Program. (Page 29) The Menu Program provides shortcuts to frequently used functions on the computer. You can easily change the settings. Press this button to select an item. It is the same as the Enter key on the keyboard. You can register a frequently used program to launch it just by pressing this button.
(Page 30) Overview 8 Status Indicators z HDD v Power Status x Wireless LAN c Charge Status z HDD This turns on while the hard disk drive is being accessed. x Wireless LAN This turns on when the wireless LAN is operating. (Page 53) c Charge Status This shows the power source and the battery charge status. Green: When the battery is fully charged or the battery is not installed. Amber: When the battery is being charged. Blinks: When pressed other button in HOLD status. Off : When the computer is running on battery power without being connected to AC power. v Power Status This shows the computer operating status. On : When the computer is operating. Blinks: When the computer is in Standby mode. Top View z Wired LAN Port c Windows Security Button b Vents n Stylus Pen / Stylus Slot x CF Card Slot v Power Switch / AVStation NOW Switch z Wired LAN Port x CF Card Slot c Windows Security Button v Power Switch /
AVStation NOW Switch b Vents A port to which an Ethernet cable is connected; connects the computer to a LAN.
(Page 50) A slot into which a CF card is inserted. (Page 33) Pressing this button is the same as pressing the <Ctrl>+<Alt>+<Del> keys on the keyboard. You can turn the computer on or off by sliding this switch to the right and releasing it.
(Page 20) You can launch AVStation NOW by sliding this switch to the left when the computer is turned off. (Page 87) To turn the computer on, slide the Power switch to the right and hold it for more than 0.1 seconds before releasing it. The internal heat of the computer is emitted through these holes. If the vents are blocked the computer may over-heat. This may be dangerous so avoid blocking the vents. n Stylus Pen /
Stylus Slot The Stylus is used to enter information through the touch screen. (Page 22) You can keep the Stylus Pen in the Stylus Slot. Overview 9 Right View z Monitor Port A port used to connect a monitor, TV or projector supporting a 15-pin D-SUB interface. (Page 34) x USB Port A port used to connect a USB device such as a USB keyboard, mouse, etc. c DC-in Jack A port used to connect the AC adapter supplying power to the computer. z x c Left View z x c v b n z USB External ODD Power Port A port used to supply power to the external USB ODD. x USB Port A port used to connect a USB device such as a USB keyboard, mouse, USB ODD, etc. c Headphone Jack A jack used to connect the headphones. v Volume Control Button A button used to control the volume. (Page 28) b HOLD Switch If this switch is in the HOLD position (upside), none of the buttons will function. If the computer enters HOLD mode, the Lock icon appears on the screen for a moment and the Charge LED ([ICON]) blinks for a moment. To release HOLD mode, slide the HOLD switch downwards. n Hand Strap Hole You can connect the Hand Strap here. Overview 10 Rear View z 20 Stand x 80 Stand c Battery Latch v Battery z 20 Stand x 80 Stand You can position the computer at a 20 degree angle so that you can comfortably enter texts. You can position the computer at an 80 degree angle so that you can comfortably view the screen. c Battery Latch The latch used to remove or install the battery. (Page 112) v Battery A Lithium Ion rechargeable battery which supplies power to the computer. (Page 112) Overview 11 Turning the Computer On and Off To turn on the computer 1 Install the battery and connect the AC adapter. (Refer to the Getting Started Guide.) 2 Adjust the stand at the back of the computer at a comfortable angle. 3 Slide the Power Switch to the right, hold it for more than 0.1 seconds and then release it. The computer is turned on. When running the computer on battery power, the LCD brightness is automatically dimmed to save battery power. To increase the LCD brightness, press the Menu button and press Brightness Up. (Page 29) To turn off the computer 1 Click the start button (
2 Click Turn Off Computer.
) on the taskbar. 3 Click Turn Off. When the system cannot be shut down due to a system error, turn it off by sliding and holding the Power Switch for more than 4 seconds. After that, when turning it on by sliding the Power Switch, the disk checking program may launch. Turning the Computer On and Off 12 Chapter 2. Using the Computer Stylus Pen Entering Text Using the Tablet PC Input Panel Dialkeys Volume Control Using the Buttons The Menu Button The Quick Launch Button The Auto Scaler Button CF Card Slot Connecting a Monitor Connecting a Monitor Viewing on a Monitor Dual View 14 16 16 19 20 21 21 22 24 25 27 27 27 28 Turning the Computer On and Off 13 Stylus Pen A Stylus Pen is used instead of mouse and provides the same function. Before You Start!
It is recommended to connect and use a USB keyboard and mouse when using the computer for a long time. Taking the Stylus Pen Out Pull the Stylus Pen upwards. When finishing using the pen, return it to the Stylus Slot. Stylus Pen Functions Mouse Single-click Double-click Stylus Pen Single-tap Double-tap Function Single-tap with the pen to select an item. Double-tap with the pen to run an item. Right-click Press and Hold Press and hold for more than 3 seconds with the pen to display the Pop-up menu. Drag Drag Press an item and drag it with the pen to move the item. Learning How to Use the Stylus Pen Select Start > Get Going with Tablet PC to learn how to use the Stylus Pen. (Page 38) Stylus Pen 14 Calibrating the Stylus Pen When using the Stylus Pen for the first time or the pointing position of the Stylus Pen is incorrect, you can correct the pointing position using the TouchKit program. 1 Select Start > All Programs > Touchkit > Configure Utility. 2 In the Tools tab, press the 4 Points Calibration. Enhancing the Accuracy If a more precise correction is required, you can correct the pointing position by using 9-
Points or 25-Points Calibration. z In the Linearization Style item in the Settings tab, select 9-Points or 25-Points and then press the Apply button. x In the Tools tab, press Linearization. The higher the number, the more precise a correction is provided. 3 Press and hold the X-symbol displayed on the screen until it stops blinking. The X-
symbol appears repeatedly according to the selected number of points. 4 If the Calibration Result window appears, click the OK button. The pointing position of the Stylus Pen is corrected. Stylus Pen 15 Entering Text You can enter texts by using the Tablet PC Input Panel or DialKeys on this computer. Before You Start!
Using a USB keyboard is more convenient over long periods of use. For example, to enter texts in Notepad, select Start > All Programs > Accessories >
Notepad and run Notepad. Using the Tablet PC Input Panel The Tablet PC Input Panel is an on-screen letter input pad provided by Windows. Using it, you can enter letters with the Stylus Pen when a keyboard is not available. You can enter letters using the Tablet PC Input Panel in 3 ways. Click on the Tablet PC Input Panel (
) icon on the taskbar. Writing Pad Character Pad On-Screen Keyboard Tablet PC Input Panel icon Close Tools and Options Help You can learn detailed usage for the Tablet PC Input Panel. Entering text using the Writing Pad You can enter text on the Writing Pad using the Stylus Pen. 1 In the Tablet PC Input Panel, click the Writing Pad icon (
2 Write text in the input area of the Writing Pad with the Stylus Pen and wait a moment. The written letters are converted into the corresponding computer characters. Press the Insert button to enter the converted letters.
). Insert Entering Text 16 Editing Letters Overwrite wrong letters or press the lower part of a letter to select another letter from the displayed letters. Entering text using the Character Pad You can write a letter in each cell of the Character Pad with the Stylus Pen. 1 In the Tablet PC Input Panel, click the Character Pad icon (
2 Write a letter in the cell of the Character Pad with the Stylus Pen and wait a moment. The
). written letter is converted into the corresponding computer character. Press the Insert button to enter a converted letter. Insert Entering Text 17 Entering text using the On-Screen Keyboard The On-Screen Keyboard displays a standard keyboard on the screen so that you can enter a letter by pressing the corresponding key on the screen. 1 In the Tablet PC Input Panel, click the On-Screen Keyboard icon (
2 Press a letter on the screen with the Stylus Pen.
). Entering Text 18 Dialkeys DialKeys is an on-screen keyboard designed to be used with compact touch screen computers. You can enter letters using the DialKeys by pressing a key on the screen with your thumbs while holding both of the lower corners of the computer with your hands. 1 Click on the Dialkeys icon (
) on the taskbar for more than 3 seconds and select Show/Hide DialKeys from the pop-up menu. 2 Dialkeys appears on both lower corners of the screen. Enter letters using your thumbs. Corresponds to the Enter key on a keyboard. Corresponds to the space bar on a keyboard. Minimizes the Dialkeys. Corresponds to the Backspace on a keyboard. Move the current window upwards. To View Detailed Usage of the Dialkeys Click on the Dialkeys icon (
from the pop-up menu.
) on the taskbar for more than 3 seconds and select Help Entering Text 19 Volume Control You can control the volume with the Volume Control button or Volume Control program. Using the Volume Control with the Volume Control Button Press the top of the Volume Control Button (
bottom of the button (-) to turn down the volume.
) (+) to turn up the volume or press the Using the Volume Control with the Volume Control Program Click on the Volume icon (
) on the taskbar and slide the volume slide bar up or down. Alternatively, double-click on the Volume icon (
) and adjust the master volume control. Volume Control 20 Using the Buttons The procedures to use the Menu, Quick Launch and Auto Scaler buttons are described below. The Menu Button (
Press the Menu button to launch the Menu Program. The Menu Program provides shortcuts to frequently used functions on the computer. You can easily change the settings.
) Press the Menu button again or press a point on the screen to hide the Menu Program. Menu Items Brightness Up Function Whenever this item is pressed, the LCD brightness is increased by one step. Brightness Down Whenever this item is pressed, the LCD brightness is decreased by one step. Wireless LAN ON (OFF) Press this item to turn the Wireless LAN on or off. Wired LAN ON (OFF) Press this item to turn the Wired LAN on or off. Sound ON (OFF) Press this item to turn the volume on or off. Backlit OFF Press this item to turn the LCD backlight off. To turn it on again, press a point on the LCD screen once. Using the Buttons 21 LCD/CRT SRS Press the item to view screen images on an external monitor. When pressing this item once, screen images are displayed on the LCD. When pressing this item twice, screen images are displayed on both the LCD and the CRT (external monitor) simultaneously. CRT Output Only is not supported. Press this item to set up the SRS function. SRS provides surround sound even with 2 speakers by extending the space perception. Whenever this item is pressed, the following function is selected. WOW XT: For listening to music. Trusurround: For watching movies. SRS OFF: Turns the SRS function off. Battery Shows the remaining battery charge. Whenever this item is pressed, the screen rotates by 90 degrees. Rotation When rotating the screen, a part of the screen image may not be displayed in some software programs. Since the Rotation function is supported for the 800x480 pixels resolution only, if the Rotation function does not work when pressing the item, set the screen resolution to 800x480 pixels first by pressing the Auto Scaler button. The Quick Launch Button You can register a frequently used program to launch the program, just by pressing this button. The procedures to change the default settings are described below. Default Setting Quick Launch button is defined as follows by default. Button Function Description u1 u2 u3 u4 Mouse Scroll Up Scrolls up in the current window. Back Moves to the previous page in Internet Explorer or Windows Explorer. Mouse Scroll Down Moves to the next page in Internet Explorer or Windows Explorer. Scrolls down in the current window. Forward Scrolls down in the current window. Using the Buttons 22 Changing the Settings The procedures to change the default settings are described below. 1 Double-click the Magic Keyboard icon (
2 Click the add button. 3 Enter a name in the Group Name field and select a shortcut key in the Select Shortcut 4 Select the Run Program option, click the Browse button, select a program to be
) on the taskbar. Key field. launched and click the Open button. Example) C: Program Files To use the keyboard shortcut function, select the Keyboard Effect option and then define a shortcut key combination. Internet Explorer IEXPLORE 5 Click the Apply button and click the OK button to complete the settings. Using the Buttons 23 The Auto Scaler Button The default resolution of this computer is 800x480 pixels. In the default resolution, the complete screen image of programs designed for high resolutions may not be displayed properly. In this case, press the Auto Scaler button(Automatic Resolution Adjustment Button) on the left side of the computer and select a higher screen resolution. When pressing the Auto Scaler button, the Auto Scaler menu appears. Whenever this button is pressed, the screen resolution changes to 800 x 480 (Default Resolution) > 800 x 600 > 1024 x 600 sequentially. Example) Selecting a 800 x 480 pixels resolution Example) Selecting a 800 x 600 pixels resolution The Auto Scaler button provides a function that fits high resolution screen images to the screen size and does not support all resolutions supported by the graphics chipset. To select a resolution, which is not supported by Auto Scaler, use the Display Properties.
(Page 46) About the 1024X768 Pixels Resolution The 1024x768 pixels resolution is also fitted to the screen size. You can select the 1024X768 pixels resolution by selecting the Start > Control Panel > Appearance and Themes > Display > Setting tab. (Page 46) Using the Buttons 24 CF Card Slot A CF card slot is provided so that you can use CF cards. A CF card is a removable storage device that can be used to exchange data with digital devices such as a digital camera, PDA, etc. conveniently. Before You Start!
This computer supports CF card types I and II. Using the Card 1 Insert a card into the slot in the correct direction. 2 The card drive appears. If it does not appear, click Start > My Computer. 3 Double-click the removable disk and you can save, move and delete files on and to the card. You can only use a formatted card. If it is not formatted, refer to the descriptions for'Formatting a Card'. Removing the Card Hold the end of the CF card and take it out. CF Card Slot 25 Formatting the Card You have to format a card first to use it. If a card is formatted, all data will be deleted. Before formatting a card, please backup your data. 1 Select Start > My Computer. 2 Press a removable disk with the Stylus Pen for more than 3 seconds and select Format 3 Click the Start button to begin formatting the card. from the pop-up menu. To use a CF card on both a computer and another digital device such as a digital camera, it is recommended formatting the memory card in the digital device. When formatting the memory card in the computer, you may have to format the memory card for the other digital device again to use the memory card with that device. CF Card Slot 26 Connecting a Monitor Using an external display device is useful when you are giving a presentation or watching a movie through your TV. Connecting a Monitor Open the Monitor OUT port cover by pulling the groove of the cover and connecting a monitor. Viewing on a Monitor 1 Press the Menu button. 2 Press the LCD/CRT item once to display screen images on the LCD screen. When pressing the item twice, you can view screen images on both the LCD and CRT screens simultaneously. LCD: Computer Screen CRT: External Monitor Screen Outputting to CRT only is not supported. Connecting a Monitor 27 Dual View Dual View is a function that enables you to view a computer screen over two display devices. The Menu button does not support Dual View mode. You have to use the 'Display Properties'
of Windows to use Dual View. When using Dual View, use a USB mouse. Using a mouse to move between screens is convenient. You cannot move between screens with the Stylus Pen. Using Dual View to View an Extended Screen Check if an external display device has been properly connected and configure Dual View. 1 Select Start > Control Panel > Appearance and Themes > Display. 2 Click the Settings tab. 3 Click the monitor '2' icon, select the 'Extend my Windows desktop onto this monitor' check box and click Apply and then the OK button. 4 If you have set the LCD as the primary display device, the primary display device (the LCD) is indicated as '1', and the secondary display device is indicated as '2'. Now you can view the screen through two monitors. It is recommended setting the LCD screen as the primary device ('1') when using Dual View. Connecting a Monitor 28 If the screen of the secondary display device is displayed at 640x480 pixels with 256 colours, select Start > Control Panel > Appearance and Themes > Display >
Settings tab > Monitor 2 and change the settings to the desired screen resolution and colour quality. To Move a Window between Monitors in Dual View Mode Click and hold a window title bar on the primary display device ('1') with the mouse and drag the window title bar to the secondary display device ('2') to move the window. Deactivating Dual View Mode 1 Select the Start > Control Panel > Appearance and Themes > Display > Settings 2 Click the monitor '2' icon, unselect the 'Extend my Windows desktop onto this tab. monitor' check box and then click Apply. Connecting a Monitor 29 Chapter 3. Introducing Windows About Microsoft Windows XP Get Going with Tablet PC Tablet PC Tutorials Reinstalling Windows XP The Windows XP Screen Layout Desktop Understanding the Start Menu Understanding a Window Control Panel Opening the Control Panel User Account Changing the Resolution and Colors 31 31 32 32 33 33 34 35 36 36 37 39 Connecting a Monitor 30 About Microsoft Windows XP The Microsoft Windows XP Tablet PC Edition (hereafter, Windows) operating system is installed on this computer. Microsoft Windows XP Tablet PC Edition is an operating system to which additional features for the tablet PC, such as a hand-writing recognition function, have been added, on the basis of Microsoft Windows XP Professional, for the user's convenience. You can learn elementary functions for using this tablet PC through the Get Going with Tablet PC and Tablet PC Tutorials. The computer has adopted touch screens so that you can operate the computer with your hands and does not accord completely with the characteristics of a typical tablet PC. In addition, since a Stylus Pen is provided instead of a Tablet Pen, the Tablet and Pen Settings provided by the Windows XP Tablet PC Edition are not supported Pen Options completely. To calibrate the Pen, use the Toutchkit program. (Page 23) Get Going with Tablet PC Select Start > All Programs > Get Going with Tablet PC. The Welcome to tablet computing screen appears. Click Start to learn how to use your tablet PC. About Microsoft Windows XP 31 Tablet PC Tutorials You can tour elementary functions of your tablet PC and learn how to hand-write on the Writing Pad through the Tablet PC Tour. Tablet PC Tutorials only supports the 1024x768 pixels resolution. Before running the Tutorials, select the Start > Control Panel > Appearance and Themes > Display > Settings tab and change the screen resolution to 1024x768 pixels. Select Start > All Programs > Tablet PC > Tablet PC Tutorials. The Tablet PC Tour screen appears. Click Next to learn how to perform 'Note Writing',
'Entering texts with the Tablet PC Input Panel', etc. Reinstalling Windows XP If you cannot start up Windows due to damage to the system or errors frequently occur, you can reinstall Windows using the System Recovery Media (DVD). (Page 125) You can use the system recovery media by connecting the USB External ODD to the system. About Microsoft Windows XP 32 The Windows XP Screen Layout The screen layout of Windows XP Tablet PC Edition is the same as that of Windows XP. Desktop The desktop is the working area on the computer. It consists of a large workspace and a taskbar at the bottom as shown in the figure below. z Start x Tablet PC Input Panel c Taskbar b System Tray with Clock v Language Bar z Start Opens the Start menu. x Tablet PC Input Panel The Input Pad used to enter letters. c Taskbar Running programs are displayed here. v Language Bar Switches the text input language. b System Tray with Clock Displays some program icons that are currently running. Infrequently used icons are hidden. When clicking the left arrow icon, hidden icons are displayed. The Windows XP Screen Layout 33 Understanding the Start Menu The Start menu includes everything that is required to start Windows. From the Start menu it is possible to run a program, open a file, assign system users with Control Panel, receive support by clicking Help and Support, and search desired items from the computer or Internet by clicking Search. Frequently used programs All Programs Start Button My Computer Control Panel Help and Support My Computer Displays the contents of the hard disk, the CD-ROM drive, the network drive(s), and floppy disks. It can also be used to search and open files and folders. Control Panel Enables users to configure settings on the computer. Help and Support Search Run Provides on-line help, information on Windows and troubleshooting. Enables users to search for information in files or the Internet. Run programs or documents. The Windows XP Screen Layout 34 Understanding a Window A window is the basic component in working with the computer. The My Computer window, which is a window for the computer's hard drive, will be used as an example here to show the basic composition of a window. Click Start > My Computer. Title Bar Tool Bar Quick Task Window Menu Bar Minimize Button Maximize Button Close Button Folder Icon Drive Icon
(Storage Device) Double-click the hard drive (local disk) to view internal folders and files stored in it. If the contents do not appear, click Show the contents of this folder. What is a drive?
A storage device in which files and folders are saved in, and read from. What is a folder?
A folder is used to group and manage files systematically, and may include files in sub-
folders. It is similar to a bookshelf. What is a file?
A file is a document or various kinds of material that is generated as a result of program operation. It is also called data. To view the entire structure of the drive Click the Folder icon in the taskbar to view the entire structure. Click again to return to the Quick Task Window. The Windows XP Screen Layout 35 Control Panel In the Control Panel, tools to configure Windows are collected. Opening the Control Panel Select Start > Control Panel. Icon Name Function Appearance and Themes Network and Internet Connections Add or Remove Programs Sound, Speech and Audio Devices Performance and Maintenance Printers and Other Hardware User Accounts Date, Time, Language and Regional Options Accessibility Options Security Center Used to change the appearance of Windows. Using this function, you can change the Desktop, apply a theme and a screen saver to the computer, and change the Start menu and Taskbar. Using this function, you can configure the network settings or configure and add Internet connections. Using this function, you can add or remove a program from Windows. Using this function, you can adjust the volume, select a sound scheme, and set up speakers. Using this function, you can set Windows performance options. In addition, you can manage the hard disk drive and hardware. Using this function, you can add or configure a printer, mouse, keyboard, scanner, camera, or gaming device, etc. Using this function, you can add or set a Windows XP user account. Using this function, you can configure the date, time, language, regional settings. Using this function, you can select options for weak-eyed and disabled persons. Using this function, you can check the current security status to protect the user's computer and configure the security settings for the firewall, virus anti-virus program, etc. Control Panel 36 User Account Windows XP allows each user to use a computer with his user account. The procedures to add a user account and switch between user accounts are described below. Adding a User Account 1 Select Start > Control Panel. 2 Double-click User Accounts and click Create a New account. 3 Click the Tablet PC Input Panel icon, enter a name and then click the Next button. 4 Select an account type, click Create Account, and then check the newly created account in the user account screen. If you cannot see the bottom of the screen, press and drag the scroll bar of the window with the Stylus Pen. 5 To change the user account information, click an account to be changed. You can change the account name, password, type and picture. Control Panel 37 Deleting a User Account 1 Select Start > Control Panel > User Accounts. 2 Click a user account to be deleted and click Delete Account. You cannot delete the current login user account. Switching Users 1 Select Start > Log Off. 2 Click Switch User. 3 Click a user account to login to the Start screen. Login with a new user account. Control Panel 38 Changing the Resolution and Colors The resolution means the number of pixels displayed on the screen. When setting the resolution higher, items on the Desktop become smaller and more items can be displayed on the screen. The higher the color quality, the more colors are displayed on the screen. 1 Select Start > Control Panel > Appearance and Themes > Display. 2 Click Settings and change the Screen Resolution and Color Quality and then click OK. You can check your graphics chipset. To set the color quality, select a color quality in the Color quality field. To set the resolution, slide the resolution slide bar to a desired resolution in the Screen resolution field. If 1024x768 or a higher resolution is selected, the entire screen is not displayed on the LCD screen. In this case, you have to move the mouse pointer up, down, left or right to view the hidden part of the screen image. If the 800x480 resolution is not available When selecting the 800x600 or 1024x600 resolution by pressing the Auto Scaler button, the 800x480 resolution may not appear in the Display Properties window. In this case, press the Auto Scaler button and select the 800x480 resolution. Control Panel 39 Chapter 4. Connecting to the Internet Connecting Through a Wired LAN Connecting Through a Wireless LAN Wireless Network Setup Using the Wireless LAN Setup Program Using Samsung Network Manager Using the Network Using the network after moving location Sharing Internet Access Network Status Diagnosis Using Bluetooth Devices Bluetooth Software Setup Using Bluetooth 41 43 48 49 49 52 53 56 57 57 60 Control Panel 40 Connecting Through a Wired LAN Before You Start!
You can also configure the network settings using the Samsung Network Manager. (Page 56) Before configuring the Wired LAN, you have to turn the Wired LAN on, if it is turned off. Press the Menu button and press the Wired LAN ON item to turn it on. 1 Connect a LAN cable to the computers LAN port. 2 Click Start > Control Panel. 3 Click Network and Internet Connections in the [Control Panel] window. 4 Click Network Connections in the [Network and Internet Connections] window. 5 Right-click(press and hold the Stylus Pen for more than 3 seconds) the Local Area Connection icon and click Properties. 6 On the General tab, select Internet Protocol(TCP/IP) and click Properties. Connecting Through a Wired LAN 41 z x 7 To use DHCP:
On the General tab, select Obtain an IP address automatically and Obtain DNS server address automatically. Click OK. To use a static IP:
On the General tab, select Use the following IP address and fill in the IP address, Subnet mask, Default gateway, Preferred DNS server, and Alternative DNS server fields. Click OK. To use both DHCP and static IP simultaneously:
On the Alternate Configuration tab, click User configured and fill in the fields. Click OK. Connecting Through a Wired LAN 42 Connecting Through a Wireless LAN (Optional) A wireless network (Wireless LAN) environment is a network environment that enables communication between multiple computers at home or a small-size office through wireless LAN devices. Using the wireless network connections between the systems, you can use normal network functions such as sharing of files, folders and printers. When a computer-to computer network has been established, a computer that is not connected to the Internet can share the Internet by accessing another computer connected to the Internet. For details, see Sharing Internet Access on page 53. A wireless LAN card is optional. The model of the wireless LAN card is determined by the relevant product. To view the installed wireless LAN card, click Start > Control Panel > Performance and Maintenance > System > Hardware tab > Device Manager. The wireless LAN connection settings will be described on the basis of the Windows XP Service Pack 2 installed computer. It is recommended using the default settings provided by Windows XP for the wireless LAN settings for Windows XP installed computers. To setup using the software supplied by the wireless LAN card manufacturer, refer to
"Wireless Network Setup Using the Wireless LAN Setup Program" (p46). To use the Wireless LAN, you have to turn the Wireless LAN on first, if it is turned off. Press the Menu button and press the Wireless LAN ON item to turn it on. If the Wireless LAN is turned on, the Wireless LAN LED (
) is lit. Wireless network connections can be classified into two categories. 1) Access Point (AP) You can connect to an AP to use the network. This is possible only in an environment equipped with an AP. For details, see Connecting to an Access Point (AP) on page 44. What is an Access Point (AP)?
An AP is a network device that bridges wired and wireless LANs, and corresponds to a wireless hub in a wired network. You can connect multiple wireless LAN installed computers to an AP. 2) Computer-to-computer (ad hoc) This is also called a peer-to-peer network. In computer-to-computer wireless networks, you can wirelessly connect 2 or more computers that have wireless LAN modules. For details, see Connecting to computer-to-computer networks (peer-to-peer or ad hoc) on page 45. Connecting Through a Wireless LAN (Optional) 43 Connecting to an Access Point (AP) This section describes how to connect to an AP. You can use the network when you are connected to an AP. For more detailed information such as the network key (encryption key), ask your network administrator. 1 Right-click(press and hold the Stylus Pen for more than 3 seconds) on the Wireless
) icon on the taskbar, and select View Available Wireless Network Connections (
Networks. 2 Select an AP (E.g. Test) to connect to and click Connect. If there is a configured network key for the AP to connect to, the Enter Network Key window appears. Enter the Network Key in the window and then click the Connect button. When a network key is not defined for a selected AP, click on Link to display the warning message box. Then click Connect again in the box. Now when Connected in AP is displayed, and you can access the network. Checking the connection status Move the mouse pointer over the Wireless Network Connection (
and the connection status is displayed.
) icon on the taskbar, Connecting Through a Wireless LAN (Optional) 44 Connecting to computer-to-computer networks (peer-to-peer or ad hoc) In computer-to-computer wireless networks, you can wirelessly connect 2 or more computers that have wireless LAN modules. Using this method, a computer that is not connected to the Internet can share the Internet by accessing another computer connected to the Internet.
(Refer to "Sharing Internet Access" on page 53.) You can connect by completing the following steps:
Step 1. Set up a computer-to-computer network on a computer. Step 2. Connect to the configured computer from other computers. Step 1. Setting up a computer-to-computer network 1 Right-click on the Wireless Network Connection (
View Available Wireless Networks.
) icon on the taskbar, and select 2 Click Change the order of Preferred Networks. 3 On the Wireless Network tab, click Advanced. 4 Clear 'Automatically connect to non-default network' check box, if it is selected. Select 5 In the Wireless Networks tab, click Add. 6 Enter the network name (e.g. samsung), and unselect 'The key is provided for me
'Computer-to-computer (ad hoc) networks only', and click Close. automatically'. Enter the encryption key in the Network key field, and click OK. Connecting Through a Wireless LAN (Optional) 45 To prevent a network connection from an unauthorized user, it would be better to configure a network key (encryption key). A network key consists of 5 ~ 13 alphanumeric characters (e.g. magic), or of 10 ~ 26 hexadecimal numbers (a hexadecimal number is represented by numbers '0' to '9' or letters 'a' to 'f'). 7 Check that the configured network name (e.g. samsung) is in the Preferred networks item, and click OK. Now your wireless network setup has been completed. Connecting Through a Wireless LAN (Optional) 46 Step 2. Connecting to the configured computer 1 Right-click on the Wireless Network Connection (
) icon on the taskbar, and select 2 Select the wireless network name (e.g. samsung) specified in Connecting to computer-
View Available Wireless Networks. to-computer networks (peer-to-peer or ad hoc) on page 45, and click Connect. 3 Enter a cryptographic key in the network key box and click Connect. If the network key is not configured in Connecting to computer-to-computer networks
(peer-to-peer or ad hoc) on page 45, just click Connect, without any keystrokes. When connected to the wireless network, the system displays Connected in the selected network of the Network Connection window. Checking the connection status Move the mouse pointer over the Wireless Network Connection (
and the connection status is displayed.
) icon on the taskbar, Connecting Through a Wireless LAN (Optional) 47 Wireless Network Setup Using the Wireless LAN Setup Program The procedures to connect to an access point using a wireless LAN configuration program are described below. Since the wireless LAN configuration program is included on the System Software Media, the user has to install the program. Before You Start!
To use the system software media, the external USB ODD must be connected to the computer. The following descriptions presuppose that the external ODD is connected. 1 Insert the System Software Media into the CD drive and install the wireless LAN configuration program (ACU: Atheros Client Utility). Select System Software Media > User Installation > Wireless LAN Driver ReadMe, click ReadMe and install the program according to the instructions. configuration program (
2 Right-click( press and hold the Stylus Pen for more than 3 seconds) on the wireless LAN
) on the taskbar and select Open Atheros Client Utility. 3 Alternatively, click Start > All Programs > Atheros Client Utility > Atheros Client 4 In the Profile Management tab, click Scan to search for available wireless networks. 5 Select the name of an access point (AP) to connect to from the network name (SSID) and 6 Enter a profile name to be used for the connection and select the security settings of the then click Activate. Utility. AP to be connected to in the Security tab. The network authentication, encryption type and password of an access point are configured through the access point management program. For the security information, check the security settings of an access point or ask your wireless network administrator. Refer to the following when setting a WEP key. Data encryption (WEP): The IEEE 802.11 WEP (Wired Equivalent Privacy) standard defines two levels of encryption, a 64-bit key (this is sometimes represented by 40bits) and a 128-bit key. When connecting to an Atheros access point, you can use the 152-bit key (32 hexadecimal digits or 16 ASCII characters). Key index: Select the current encryption key index used by the access point from Using an encryption key: Enter 5 (for 64-bit) or 13 (for 128-bit) alphanumeric between 1 to 4. characters (represented by 0-9, a-z, or A-Z). 7 Click OK and then OK again in the Profile Management window. If the profile is created, the profile appears in the list in the Profile Management tab and the connection is established using the profile. Connecting Through a Wireless LAN (Optional) 48 Using Samsung Network Manager Samsung Network Manager is a program that has been developed to enable users to use the network easily. Samsung Network Manager provides the following features. You can easily set up the network and printer settings. You can immediately use the network without defining new network settings again after moving locations. By setting the network settings (IP address, printer settings, etc.) for each location, you can immediately access the network without following network setting procedures each time regardless of your location. You can easily share Internet Access. You can share your Internet connection by setting up a computer with 2 LAN interfaces
(wired and wireless, or 2 wired LAN) as the sharing server. Then, you can access the Internet on a sharing client by connecting to the sharing server. You can diagnose the network status. You can diagnose the network status when the network is not properly connected. Using the Network This section describes the procedures to connect to the Internet by setting up a network. The setting up procedures include the procedures to add a printer to the network. 1 To use a wired LAN, connect the LAN cable to the LAN port and turn the wired LAN on, if it is turned off. Press the Menu button and click the Wired LAN ON item to turn it on. To use a wireless LAN, you have to turn it on, if it is turned off. Press the Menu button and click the Wireless LAN ON item to turn it on. When the wireless LAN is turned on, the Wireless LAN LED (
) lights up. 2 Run Samsung Network Manager. Select Start > All Programs > Samsung > Samsung Network Manager >
Samsung Network Manager or double click the Samsung Network Manager(
icon on the Desktop. 3 Click the Add button. 4 Select a network location icon and enter the name of the location (e.g. Home). Click the
) Next button. Using Samsung Network Manager 49 5 Select Internet direct connection and click the Next button. 6 Select the LAN device, setup the IP address and click the Next button. Select Device Setup IP Address Select Device Select a device to be connected to the Internet. Select either Wired LAN or Wireless LAN. Setting up the IP Address To allocate an IP address automatically (DHCP), select Get IP Automatically. To use a static IP address, unselect Get IP Automatically and enter an IP address. For IP address information, ask your network administrator. 7 When the Printer Setting window appears, click Finish. To add a printer, click Add Printer. The Add Printer Wizard appears. Set up the printer according to the instructions displayed on the screen. When the printer has been added, click the Show printer button, select the newly added printer and then click the Finish button. Using Samsung Network Manager 50 To not add a printer, select No Default Printer and then click the Finish button. When the network setting is complete, the Do you want to move to newly added location now? message appears. If you select Yes, the network settings for the added location are applied. When the network settings for the added location are applied, the added place and the corresponding network connection information is displayed in The detailed Information for window. When the network setting is complete, an icon for the added location is created within the Saved Locations window. Now you can use the Internet or add a new network location. Menu Current Place Information Saved Locations Wireless LAN AP Connection Procedures To use a wireless LAN, first connect to a wireless LAN AP and then you can access the network even when moving location. Or moving location and then you can access the network even when connecting to a wireless LAN AP z Right-click over the Wireless Network Connection (
) icon on the Taskbar and click View Available Wireless Networks. x Click Search AP from the Wireless menu to search for wireless LAN APs. Select an available wireless network (e.g. SAMSUNG) and click the Connect button. For information on available wireless LAN APs, ask your network administrator. Using Samsung Network Manager 51 Available AP Connect c The network key (security key) input window appears.
- If a network key has been set for the wireless LAN AP, enter the network key and click the Connect button. For the network key information, ask your network administrator.
- If no network key has been set for the wireless LAN AP, click the Connect button without entering the network key. v When the computer is connected to the wireless LAN AP, the Connected message will appear on the Wireless Network icon in the Taskbar. Using the network after moving location By setting the network settings (IP address, printer setting, etc.) for each location, you can immediately access the network without performing the network setting procedures regardless of your location. 1 Run Samsung Network Manager when connected to the Internet. 2 Select an icon that represents the corresponding location from the Saved Locations 3 When the network settings of the selected location are applied, the new location and the window and then click Move. network connection information are displayed in The detailed Information for window. Using Samsung Network Manager 52 Sharing Internet Access This section describes the procedures to share Internet Access. To share Internet Access, you first have to set a sharing server and a sharing client. When the setup is complete, you can access the Internet from the sharing client by connecting to the sharing server. Sharing Server : A computer with a direct connection to the internet and a local network connection. Sharing Client : A computer that uses the Internet by connecting to a sharing server without itself having a direct connection to the Internet. You can connect a sharing server and a sharing client as follows.(See Figure 5 on page
(p50)) Sharing Server Sharing Client External Internet Device Connection 1 Connection 2 Connection 3 Wired LAN Wireless LAN Wired LAN Client Device Wireless LAN Wired LAN Wired LAN Wireless LAN Wired LAN Wired LAN For Connection 1: To use a wired LAN, connect the LAN cable to the LAN port and turn the wired LAN on, if it is turned off. Press the Menu button and click the Wired LAN ON item to turn it on. To use a wireless LAN, you have to turn it on, if it is turned off. Press the Menu button and click the Wireless LAN ON item to turn it on. When the wireless LAN is turned on, the Wireless LAN LED (
For Connection 2,3: To connect a sharing server and a sharing client using a wired LAN, connect the computers with a crossover LAN cable or network hub first. For Connection 3, you have to connect a LAN card in advance.
) lights up. As an example, Internet sharing procedures for [Connection 1], which connect the sharing server and the Internet through a wired LAN and connect the sharing server and the sharing client through a wireless LAN, are described below. Setting Up a Sharing Server 1 Run Samsung Network Manager on the computer to be used as the sharing server. 2 Click the Add button. 3 Select a network location icon and enter the name of the location (e.g. Home). Click the 4 Select Internet direct Connection for sharing and click the Next button. 5 Set up the network device to be connected to the external Internet. Determine whether to use a firewall and select a network device to be connected to the external Internet (e.g. Wired LAN). Set the IP address and then click the Next button. Next button. Using Samsung Network Manager 53 Determine whether to use a firewall Select a device Set an IP address
- To protect against external intrusion attempts, using a firewall is recommended.
- For more information on selecting a device and setting the IP address, refer to the description of item 6 of "Setting Up a Network" on page 47. 6 Select a network device to connect to the sharing client (e.g. wireless LAN) and click the Next button. To Share Internet Access through a Wireless LAN
- In the Select Device field, select Wireless.
- In the Wireless Connection Name (e.g. Samsung) field, enter the network name.
- To use the network key (security key), select the "Use Password ,,," option and enter a network key. Remember the network key because you have to re-enter the key on the sharing client to connect to the sharing server. 7 The setup information is displayed. Confirm the settings and click the Next button. 8 When the Printer Setting window appears, click Finish. For the printer setup procedures, refer to the description of item 7 of "Setting Up a Network" on page 47 When the Shared Server setting is completed, set up the shared client. Using Samsung Network Manager 54 Setting Up the Sharing Client 1 Run Samsung Network Manager on the computer to be used as a sharing client. 2 Click the Add button. 3 Select a network location icon and enter the name of the location. Click the Next button. 4 Select Internet Sharing and click the Next button.
- To connect through a wireless LAN, select Internet Sharing - Wireless.
- To connect through a wired LAN, select Internet Sharing - Wired. 5 Confirm the network device to be connected to the server and click the Next button.
- To connect through a wireless LAN, enter the wireless connection name (e.g. Samsung) you entered in the sharing server. If you have set a network key (security key) for the sharing server, enter the network key. 6 The setup information appears. Confirm the information and click the Next button. 7 When the Printer Setting window appears, click Finish. For the printer setup procedures, refer to the description of item 7 of "Setting Up a Network" on page 47 When the settings are completed, you can use the Internet on the shared client.
- To access the Internet from the sharing client, the sharing server has to be on.
- To use the Internet on the sharing client, select a sharing client icon from the Location List window and then click the Move button.
- If the connection is broken while using the Internet on the sharing client, click the Ap Active from the Wireless menu to reestablish the connection. Using Samsung Network Manager 55 Network Status Diagnosis You can diagnose the network status when the network is not properly connected. 1 Run Samsung Network Manager. 2 Select Auto Diagnosis from the Manage menu. 3 The Network Connections figure window appears. Click the Start button to start the 4 When the diagnosis is complete, out of order devices are marked by the exclamation mark network diagnosis. icon. For detailed device status, read the description in the lower part of the window. Reconnect and set up the device according to the diagnosis result. Using Samsung Network Manager 56 Using Bluetooth Devices (Optional) Bluetooth is a wireless communication technology that allows access to devices nearby such as a computer, mobile phone, printer, keyboard or mouse without a cable connection. Bluetooth enables file transmissions, Internet access, a private area network function, and access to a keyboard, mouse and printer between devices supporting the Bluetooth function without a cable connection. Before You Start!
The Bluetooth function is only available between devices supporting Bluetooth
(computers, mobile phones, PDAs, printers, etc.), and the function may be restricted depending on the device profile. The Bluetooth function is optional and may not be supported depending on your model. Bluetooth Functions File Transmission (
) You can exchange files between 2 Bluetooth devices. You can exchange files with other computers, mobile phones, PDAs, etc. Network Access (
) You can connect to another computer with the Bluetooth function as you access a wireless LAN in Ad-Hoc mode or connect to the Internet through an AP or Internet Connecting Sharing Server. Network Access through a Phone Connection (
) You can connect to the Internet through a Bluetooth mobile phone. Data Sync (Synchronization) (
) You can synchronize the PIMS data (Outlook E-mail address data) with mobile phones, PDAs, notebook computers, etc. supporting Bluetooth. Electronic Business Card (Vcard) Exchange (
) You can exchange electronic business cards with mobile phones, PDAs, notebook computers, etc. supporting Bluetooth. Sound Output (
) You can listen to audio from the computer through another Bluetooth device or listen to audio of another Bluetooth device through the computer. HID Connections (
) You can connect a keyboard, mouse, joystick, etc. supporting Bluetooth. For more information about using the Bluetooth function, refer to the online help of the Bluetooth Device. Bluetooth Software Setup Bluetooth software is installed on computers supporting Bluetooth. For first time use, set up the Bluetooth software as follows. Using Bluetooth Devices (Optional) 57 1 Right-click(press and hold the Stylus Pen for more than 3 seconds) on the Bluetooth
) at the bottom right of the taskbar, and select Start Using Bluetooth from icon (
the pop-up menu. 2 Click the Next button to start setting up. In the setting up steps, enter a device name to be displayed in the Bluetooth Manager program. Enter a Name in the Computer Name field and select Laptop for the Computer Type field. Also, a step appears for selecting the services to be provided by your Bluetooth device for other Bluetooth devices. At this point, the program automatically detects available services and displays them as selected. It is recommended not to change the default selection. If you change the service settings, the driver necessary for the additionally selected services are installed. At this point, a warning message may appear informing you that there is no Microsoft logo. Since it does not affect the operation, continue the installation. 3 If the driver installation is complete, the next step proceeds which searches for nearby Bluetooth devices. Since you do not have to search while setting up, click the Skip button and finish the settings. Using Bluetooth Devices (Optional) 58 4 When the settings are complete, the Bluetooth icon menu of the notification area changes as shown in the figure. Using Bluetooth Devices (Optional) 59 Using Bluetooth Describes how to exchange files between computers supporting Bluetooth and how to use other Bluetooth devices. Bluetooth Help Bluetooth Help provides detailed procedures on using Bluetooth functions. Double-click on My Bluetooth Settings on the Desktop and click Help > Bluetooth Help from the top menu. Select Start > Help and Support > Networking and the Web > Networking > Wireless networking > Bluetooth devices (wireless) to view Windows Help. Exchanging Files between Bluetooth computers The procedures to exchange files and folders between Bluetooth computers are described below. 1 On the computer which is sending a file (hereafter Computer A), right-click(press and hold
) on the taskbar and the Stylus Pen for more than 3 seconds) the Bluetooth icon (
select Quick Connection > File Transmission > Search for Device. 2 In the Select Device window, click on a computer to be connected (hereafter Computer B). Using Bluetooth Devices (Optional) 60 3 If the Bluetooth PIN code requested notification window appears on the bottom right taskbar, click on the window, enter the Bluetooth PIN code and click the OK button. The Bluetooth PIN Code is a password used for the connection between two Bluetooth devices, the user just enter the same PIN Code (E.g. same numbers) on both Bluetooth devices to make a connection. B, enter the code that you have entered in Step 3 above. 4 After a short while, the Bluetooth PIN Code required dialog box appears on Computer 5 If the FTP File Access Privilege Request window appears on Computer B, click on the 6 The file transmission window appears on computer A. Drag files or folders to send onto window. If the Select Access Permission window appears, click the OK button. the window, and the files or folders are automatically transmitted. Using Bluetooth Devices (Optional) 61 7 If the file transmission is complete, close the File Transmission window. The received files are saved in the C:\Documents and Settings\[user name]\My Documents\Bluetooth Exchange folder. Connecting Keyboard, Mouse, Joystick and Headset devices The procedures to use Bluetooth HID devices (keyboard, mouse, joystick, etc.) or a headset, etc. on the computer are described below. The Bluetooth PIN Code is a password used for the connection between two Bluetooth devices, the user just enter the same PIN Code on both Bluetooth devices to make a connection. 1 Turn on the Bluetooth function on the device to connect to (mouse, keyboard, joystick or headset). Some devices have a button to turn on the Bluetooth function, so refer to the corresponding device manual. 2 Double-click on the My Bluetooth Settings icon (
3 If the My Bluetooth Settings window appears, click on View Devices within
) on the Desktop. Coverage. If the device to connect to appears, click on the device. (E.g. mouse) If the device does not appear, click the View Devices within Coverage. If the device has not appeared yet, since this menu changes to Search Devices within Coverage, click the Search Devices within Coverage to show the device. Using Bluetooth Devices (Optional) 62 4 If the Bluetooth PIN Code input window appears, enter a PIN code referring to the manual of the corresponding device. The PIN code for an HID device is generally printed in the manual of the corresponding device. 5 If you enter the PIN code, you can immediately use the device. A Bluetooth keyboard and mouse work only in Windows. They will not work in MS-DOS mode or in Hibernation mode. Stopping a Bluetooth device Right-click(press and hold the Stylus Pen for more than 3 seconds) the Bluetooth icon (
on the taskbar and select Stop the Bluetooth Device.
) To use a Bluetooth device after stopping it, select Start Bluetooth device as above. Use Instructions Bluetooth devices must be within a 3m distance. For a better communications environment, use the devices in an open space where no wall or obstacle exists. For a telephone connection, data synchronization, electronics business card exchange, fax transmission/reception, sound related functions, and serial port function, you can connect with only one Bluetooth device. Using the network connection or file transmission function, multiple Bluetooth devices can be connected. However, since connecting with multiple devices may slow down the data rate or make the connection unstable, connecting with one device at a time is recommended. The Bluetooth function of a Bluetooth PDA, mobile phone, mouse or keyboard may be turned off. To use them in connection with a Samsung computer supporting Bluetooth, you must check if the Bluetooth function of the device to connect to is turned on. For the procedures on turning on the Bluetooth function of a device, refer to the manual of the device. The services provided by Bluetooth devices may vary depending on their capability. For the services provided by Bluetooth devices, refer to the manual of the device. Using Bluetooth Devices (Optional) 63 Chapter 5. Using Applications Using AVStation premium Program Launcher Screen Layout Using Program Launcher Start and Screen Layout MUSIC Station PHOTO Station MOVIE Station Introducing Programs Using Samsung Update Plus Program Launcher 65 67 69 69 70 71 71 72 74 78 Using AVStation NOW / AVStation Viewer 82 82 83 84 85 87 89 91 91 Start / Exit AVStation NOW Start / Exit AVStation Viewer Screen Layout MUSIC Station MOVIE Station CyberLink PowerDVD Voice Recorder Recording Using Bluetooth Devices (Optional) 64 Introducing Programs Using software supplied with the Samsung computer, you can easily use difficult functions and troubleshoot problems by yourself. Learn how to use the programs yourself. For detailed information, refer to the help of the corresponding software. Before You Start!
Every software program may not be provided or the version may differ depending on your computer model. Multi Media Functions Program Launcher The Program Launcher categorizes frequently used programs, folders, web sites so that you can easily manage and access them. This program is designed for the small LCD size so that you can easily use this program with the Stylus Pen or your fingers. (Page 75) AVStation premium (
) AVStation premium is an integrated multimedia program that enables users to enjoy better quality of music, photographs, video, movies, etc. all with a single program. (Page 77) AVStation Viewer AVStation Viewer is a program that enables you to easily run AVStation premium in full screen. (Page 87) AVStation NOW AVStation NOW is an integrated multimedia program that enables users to enjoy photographs, video, DVDs, music, etc. all with a single program and without booting Windows even when the computer is turned off. (Page 87) Introducing Programs 65 CyberLink PowerDVD (
) CyberLink PowerDVD is a DVD player program supplied with the external USB ODD. To use this program, you have to install this program manually. (Page 95) Voice Recorder (
) Video Recorder is a program which enables users to make and play recordings. (Page 104) Management Functions Samsung Update Plus (
) Samsung Update Plus is software that examines and updates the Samsung software and drivers installed on your Samsung computer to the most recent versions. (Page 73) Samsung Network Manager (
) Samsung Network Manager is a program that has been developed to enable users to configure the network and internet sharing settings easily. You can configure the network settings by the location and you can configure the Internet sharing settings and perform a network diagnosis. (Page 56) Samsung Battery Manager (
) Samsung Battery Manager is a power management program that provides easy-to-use power management and power saving settings so that the battery usage time can be extended. (Page 114) Samsung Display Manager Samsung Display Manager is a program that displays the setting status of some buttons on the screen. Example) The icon that appears when pressing the Menu button and clicking Brightness Up. Troubleshooting Functions Magic Doctor (
) Magic Doctor is troubleshooting software provided by Samsung Computer. A user can diagnose system problems via one-click or by selecting diagnostic items. (Page 118) Norton AntiVirus (
) Norton AntiVirus is a program that examines a computer and deals with found viruses. Since viruses may damage the files and data on your computer, it is recommended to examine your system frequently with the Norton AntiVirus program. (Page 120) Introducing Programs 66 Using Samsung Update Plus Samsung Update Plus is software that examines and updates Samsung software and drivers installed on your Samsung computer to the latest version. To use Samsung Update Plus, your computer has to be connected to the Internet. To Update Samsung Software and Drivers 1 Select Start > All Programs > Samsung > Samsung Update Plus > Samsung Update Plus. If this is the first time you are running the program, a window will appear asking you if you agree to the agreement in the window. Click Agree to use this software. 2 Click Search for and Install Updates and click the Search for New Updates button. 3 If there are available software or driver updates for your computer, the available updates will be listed. Select the required updates from the list and click Install Update to start the update.
(The update list on the screen may differ depending on the computer model.) Updates that must be installed separately. If you select Install as an update item that must be installed separately, a message appears informing you of this. Follow the instruction message to correctly install it. Automatic update items display By default, your computer is configured to automatically search for updates. If there is a new update available, this is notified in the notification area. Click the balloon help icon in the notification area. Here you will be able to find the latest available updates. Using Samsung Update Plus 67 To change the automatic update settings, click the Configuration button in Figure 2 and change the settings. Samsung Update Plus does not provide updates for additionally installed software and device drivers. Using Samsung Update Plus 68 Program Launcher The Program Launcher categorizes frequently used programs, folders, web sites so that you can easily manage and access them. This program is designed for the small LCD size so that you can easily use this program with the Stylus Pen or your fingers. Program Launcher Screen Layout When turning the computer on, the Program Launcher is launched. If it does not appear automatically, click Start > All Programs > Microsoft Touch Pack for Tablet PC > Program Launcher. Battery Charge Status When clicking the icon, the Power Option Properties window appears. Wireless LAN Status When clicking the icon, the Network Connections window appears. View Taskbar Clock Minimize Close Category Shortcut Icon Program Launcher 69 Using Program Launcher For example, the procedures to launch the Calculator on the Program Launcher are described below. 1 Run the Program Launcher. 2 Select More Programs > Calculator. The Calculator program is launched. For more detailed usage Program Launcher User Setting functions For more detailed usage, click Program Launcher Help from the Tools category. You can add a category and add or delete a shortcut icon. Click on Customize Launcher from the Tools category to change the settings. Program Launcher 70
1 2 3 | Users Manual 1b | Users Manual | 2.14 MiB | March 28 2006 |
Using AVStation premium AVStation premium is an integrated multimedia program that enables users to enjoy music, photographs, video, movies, etc. all with a single program. program version. Before You Start!
AVStation premium is optional and may not be provided depending on the model. The screens used in this manual may differ from actual screens according to the TV Station is only available for systems supporting the TV function. To play an audio CD or DVD, you have to connect the external USB ODD to the For detailed usage, refer to the program help. computer. The following descriptions presuppose that the external ODD is connected. Start and Screen Layout To launch the program, select Start > All Programs > Samsung > AVStation premium
> AVStation premium. Alternatively double-click the AVStation premium icon (
) on the Desktop. x c v z z Station Bar x Menu Bar c Library v Exit Press the Exit button to exit the program. MUSIC You can play a music file or an audio CD. PHOTO You can view or edit a photograph (image), and also view the photographs through a SlideShow. MOVIE You can play a video (movie) file or a DVD/VCD title. Using AVStation premium 71 MUSIC Station Launch AVStation premium and click MUSIC on the Station Bar. z c x z MUSIC Menu Bar x Station Bar c MUSIC Library v Register a File b Playlist n Playlist Control Buttons m Play Control Buttons
, Volume Control
. Play Options
/ EDS Setting Button b n v m
,
.
/
What is EDS (Enhanced Digital Sound)?
EDS (Enhanced Digital Sound) is a sound quality enhancement technology developed by Samsung Electronics. You can listen to clearer sound if you enable the EDS function when playing music or video on AVStation premium. Playing an Audio CD The procedures to play an audio CD are described below. 1 Launch AVStation premium and insert an audio CD into the CD drive. 2 In the Audio CD window, select Play Audio CD using Samsung AVStation and click the OK button. 3 The tracks on the audio CD are displayed in the Playlist and the first track is automatically played. Using AVStation premium 72 If an audio CD is already in the CD drive, double-click the album title in the Audio CD folder of the Library and add the tracks to the Playlist. The tracks added to the Playlist are played. Playing a Music File If a music file is registered to the MUSIC Library, you can easily play the music file. For the procedures to register tracks to the Library, refer to (p74). 1 Move to MUSIC Station and double-click on All Music. 2 Double-click a music file. The file is added to the playlist and played. Play a Track not registered to the Library Click File > Open, select a music file to be played and click Open. The selected track is registered to the Library and played. Creating My Playlist Using AVStation premium 73 My Playlist is a personal album with which you can collect, manage and play your favorite music files. For the procedures to create My Playlist, refer to the descriptions of MUSIC Station in Help. Adding Music Files to the Library MUSIC Library is a library holding music files used by MUSIC Station. The procedures to add music files saved on the computer to the Library are described below. You can add files, folders or search and add files. As an example, the procedures to add a folder are described below. 1 Click on the Register a File (
) button below the Library and click on Add by Folders. 2 Select a folder which included music files and click the OK button. The music files in the folder are added to the Library. The tracks used in AVStation are automatically added to the Library. PHOTO Station Launch AVStation premium and click PHOTO on the Station Bar. Using AVStation premium 74 x
, z PHOTO Menu Bar x Station Bar c PHOTO Library v Register a File b Image Viewer Tab n Image Editor Tab m Move to a Higher-Level Folder
, Preview/Zoom-in b n m z c v Viewing an Image The procedures to view images registered to the PHOTO Library one by one and through a SlideShow are described below. For the procedures to register image files to the Library, refer to (p77). 1 Move to PHOTO Station and double-click on All Images. 2 Click on a folder which includes images, and the images in the folder are displayed in the Image Viewer window. Image Viewer Window Image 3 Double-click on an image. The selected image is zoomed in on. Using AVStation premium 75 Viewing an Image not registered to the Library Click File > Open, select an image file to view and click Open. The selected image file is registered to the Library and displayed in the Image Viewer window. Viewing an Image in Full Screen or through a SlideShow. Click the Full Screen (
Viewer window. To return to the Image Viewer window, double-click on the screen.
) button or SlideShow (
) button below the Image Watching a SlideShow while Listening to Music To watch a SlideShow while listening to music, play music from MUSIC Station and run SlideShow. Setting an Image as the Background. Click the Set as Background (
selected image is set as the Desktop background.
) button below the Image Viewer window. The Editing an Image You can change the shape of an image, edit an image or apply special effects to an image. The image editor functions are described below. 1 Select an image to edit in the Image Viewer window, and select the Image Editor tab. The Image Editor screen appears. The Image Editor screen consists of an Image Workspace window and 3 Tool tabs. Using AVStation premium 76 Image Workspace Zoom In / Zoom Out 2 Edit the image using the Shape, Edit and Effect tools. Tool Tabs Shape tool: Change the shape of an image through cut, resize. Edit tool: Draw a line, add some clip art or enter letters. Effect tool: Apply various effects to an image. 3 When finishing editing an image, click the Save Edited Image (
Image Editor window. The edited image is saved.
) button below the Adding Images to the Library The PHOTO Library is a library holding image files to be used by PHOTO Station. The procedures to add image files saved on the computer to the Library are described below. You can add files, add folders or search and add files. As an example, the procedures to add folders are described below. 1 Click the Register a File (
) button below the Library and click on Add by Folders. 2 Select a folder which includes image files and click the OK button. The image files in the folder are added to the Library. The image files used in AVStation are automatically added to the Library. Using AVStation premium 77 MOVIE Station Launch AVStation premium and click on MOVIE on the Station Bar. z c x b z MOVIE Menu Bar x Station Bar c MOVIE Library v Register a File b Video Play window n Play Control Buttons m Volume Control
, EDS Setting Button (p72)
. EDI Setting Button
/ Capture Button v n m
,
. /
What is EDI (Enhanced Digital Image)?
EDI (Enhanced Digital Image) is a visual quality enhancement technology developed by Samsung Electronics. You can view a clearer and sharper picture by enabling the EDI function when watching TV or playing a video on AVStation premium. However, some TV tuners and graphics cards are not supported by EDI. For information on EDS (Enhanced Digital Sound), refer to p72. Playing a DVD The procedures to play a DVD title are described below. To play a DVD title, DVD playing software (e.g. CyberLink PowerDVD) must be installed. Install the DVD playing software first. 1 Launch AVStation premium and insert a DVD title into the DVD drive. 2 In the 'What do you want Windows to do?' window, select Play DVD Video using Samsung AVStation and click the OK button. Using AVStation premium 78 3 The DVD title is played. If a DVD title is already in the DVD drive, double-click the DVD title in the DVD / VCD folder of the Library. The DVD title is played. Playing a Movie(Video) File The procedures to play a video file registered to the MOVIE Library are described below. For the procedures to register files to the Library, refer to p80. 1 Move to MOVIE Station and double-click All Movies. 2 Double-click a video file. The file is played. Using AVStation premium 79 Playing a Video File not Registered to the Library Click File > Open, select a video file to be played and click Open. The selected file is registered to the Library and played. Playing a Video File in Full Screen 1) Double-click on the current playback screen. 2) The video is played in full screen. In full screen, move the mouse pointer to the bottom of the screen to show the Play Control bar. To play at the default screen size, double-click on the screen. Capturing the Video Screen
) below the Play window when the desired image Click on Capture Current Screen (
appears on the screen and click the OK button. Captured images are saved in the C:\Program Files\Samsung\AVStation Premium x.x\Data\Captured Images folder. In addition, you can view captured images in the PHOTO Station > Captured Images folder. Adding Videos to the Library The MOVIE Library is a library holding video files to be used by MOVIE Station. The procedures to add video files saved on the computer to the Library are described below. You can add files, add folders or search and add files. As an example, the procedures to add folders are described below. 1 Click the Register a File (
) button below the Library and click Add by Folders. Using AVStation premium 80 2 Select a folder which includes video files and click the OK button. The video files in the folder are added to the Library. The video files used in AVStation are automatically added to the Library. Using AVStation premium 81 Using AVStation NOW / AVStation Viewer Using these programs, you can play music, photographs, video and movies in full screen. You can enjoy multimedia using AVStation NOW when the computer is off and using AVStation Viewer when the computer is on. Before You Start!
AVStation NOW and AVStation Viewer are optional and may not be provided depending on the model. AVStation NOW Restrictions You can only use AVStation NOW when the computer is turned off. Using AVStation NOW, you can play files registered to the AVStation premium Library, saved to My Computer, and saved on the multi-card slot. (For the procedures to register files to the Library, refer to p74, p77 and p80.) If you define a login password for a Windows user account or if the folder is protected, you cannot play the files in the folder on AVStation NOW. AVStation Viewer Restrictions Using AVStation Viewer, you can only play files registered to the AVStation premium Library. (For the procedures to register files to the Library, refer to p74, p77 and p80.) Since the screen layout and usage of the two programs are similar, the manual describes the functions and screens on the basis of AVStation NOW. The screen figures may differ from actual ones depending on the program version. TV Station is only available for systems supporting the TV function. In AVStation NOW, the Auto Scaler function is not available. Start / Exit AVStation NOW Starting To turn the computer on, slide the Power switch/AVS NOW switch to the left (
hold it for more than 0.1 seconds.
) and If the HOLD switch on the left side of the computer is slid upwards all buttons of the computer are locked and do not work. If AVStation NOW is not launched, check the position of the HOLD switch. Using AVStation NOW / AVStation Viewer 82 Exiting Move the mouse pointer to the top screen and click the Exit (
) button. Alternatively, slide and hold the Power switch/AVS NOW switch to the right for more than 0.1 seconds. Start / Exit AVStation Viewer Starting Select Start > All Programs > Samsung > AVStation premium > AVStation Viewer from Windows. Exiting Move the mouse pointer to the top of the screen and click the Exit (
) button. Using AVStation NOW / AVStation Viewer 83 Screen Layout MUSIC You can play a music file or audio CD. PHOTO You can view a photograph or image file one by one or in a SlideShow. MOVIE You can play a video, DVD or VCD title. Settings You can set the Music, Photo and Movie settings. To move to the start screen while using the program Click over the top left in the current screen. Then the (
icon, you can move to the start screen.
) icon appears. If you click this Using AVStation NOW / AVStation Viewer 84 MUSIC Station The procedures to play a music file or an audio CD are described below. Playing a Music File The procedures to play a music file registered to the MUSIC Library are described below. (For the procedures to register files, refer to p74.) 1 Launch AVStation NOW and click on Music. 2 Click on All Music and double-click a file in the right pane. The music file is played. z x c v z My Computer This only appears in AVStation NOW. You can manually find and play files on My Computer or a removable disk. x All Music c Playlist Window v Music File Playing an Audio CD 1 Launch AVStation NOW and insert an audio CD into the CD drive. 2 In the AVStation NOW start screen, click on Music. 3 Double-click the Audio CD in the left pane and double-click on an album or music file in the right pane. The selected music file is played. Using AVStation NOW / AVStation Viewer 85 PHOTO Station The procedures to view images registered to the PHOTO Library one by one and through a SlideShow are described below.
(For the procedures to register image files to the Library, refer to p77.) 1 Launch AVStation NOW and click on Photo. 2 Click on All Images and double-click on an image file in the right pane. z x c z My Computer This only appears in AVStation NOW. You can manually find and play files on My Computer or a removable disk. x All Images c Image File 3 The selected image is zoomed in on. To view an image in Full Sreen or through a SlideShow. Click on the SlideShow or Full Screen button below the zoomed in image. To return to the previous status in the SlideShow or Full Screen, double-click on the screen. In AVStation NOW, double-click and click on Back. Using AVStation NOW / AVStation Viewer 86 MOVIE Station The procedures to play a video (movie) file or DVD/VCD title are described below. Playing a Movie File The procedures to play a video file registered to the MOVIE Library are described below. (Refer to p80.) 1 Launch AVStation NOW and click the Movie. 2 Click on All Movies and double-click a movie file in the right pane. The movie file is played. z x z My Computer This only appears in AVStation NOW. You can manually find and play files on My Computer or a removable disk. x All movies c movie File c Showing the Play Control window When clicking on the screen once, the Play Control window appears at the bottom. Using AVStation NOW / AVStation Viewer 87 Playing a DVD 1 Launch AVStation NOW and insert a DVD title into the DVD drive. 2 In the AVStation NOW start screen, click on Movie. 3 Click on DVD/VCD and double-click on the DVD title. The DVD title is played. Using AVStation NOW / AVStation Viewer 88 CyberLink PowerDVD CyberLink PowerDVD is a DVD player program. Before You Start!
CyberLink PowerDVD is supplied with the external USB ODD. So, it is optional and is not supplied with some models. In addition, to use this program, you have to install the program manually using the external USB ODD. 1 Insert a DVD title into the DVD drive. 2 Select Play DVD Video Using Power DVD and click OK. z x After a moment, the DVD title is played. 3 If the DVD title is not played automatically, click Start > All Programs > CyberLink 4 Click the Play button in the CyberLink PowerDVD play control panel. PowerDVD > CyberLink PowerDVD. z x z PLAY x SETTINGS CyberLink PowerDVD 89 For more detailed usage For more detailed usage, click Start > All Programs > CyberLink PowerDVD >
PowerDVD Help. DVD Region Code A DVD title has a region code according to the international specifications so that it can be played only in that specific region. DVD titles with a region code will only play on a DVD drive with the same region code. A DVD drive is sold with an empty region code and the region code is set when the user inserts a DVD title into the drive for the first time. Whenever DVD title is inserted with a region code that is different from that of the DVD drive, the region code of the DVD drive is automatically changed to the region code of the DVD title. However, the region code changes of a DVD drive is limited to 5 changes. After that, the region code is permanently fixed to the last region code. CyberLink PowerDVD 90 Voice Recorder Video Recorder is a program which enables users to make recordings. Recording 1 Click Start > All Programs > Samsung > Voice Recorder > Voice Recorder. 2 Start recording near the built-in microphone at the front of the computer by clicking the Record (
) button. HELP OPEN PLAY STOP RECORD SETTING 3 If the recording is complete, click the Stop (
file name and click Save. A recording file is saved to the 'C: My Recorded Files 4 To play a recorded file, click the Play (
) button. To play a previously recorded file, click the Open (
' folder.
) and select the file.
) button. In the Save window, enter the When unable to make a recording using the built-in microphone Click the SETTING button and check if the Recording device is set to SoundMAX HD Audio I, and the Input Source is set to Microphone. If the setting is not done properly, you will not be able to make a proper recording. Voice Recorder 91 For more detailed usage, click the Help button. Voice Recorder 92 Chapter 6. Customizing Your Computer Using System Setup Starting System Setup System Setup Screen Setting a Booting Password Changing the Booting Priority Using the Battery Removing and Attaching Battery Charging the Battery Monitoring the Battery Charge Extending the Battery Usage Time Tips for Using Your Computer Travelling with Your Computer Handling Spills Storing the Computer for Long Periods 94 94 95 97 100 101 101 101 102 104 107 108 108 108 Voice Recorder 93 Using System Setup The System Setup (BIOS) program enables you to configure your computer hardware. Before You Start!
Use the BIOS setup to define a booting password, change the booting priority or add a new device. Since incorrect settings may cause your system to malfunction or crash, take care when setting up the BIOS. The functions of the BIOS setup are subject to change for product function enhancement purposes. Starting System Setup 1 Slide the Power switch to the right to turn the computer on. 2 The booting screen (SAMSUNG logo) appears. Press the Menu button (
side of the computer. When an external keyboard is connected, press the F2 key.
) on the right 3 After a moment, the BIOS setup screen appears. The items of the BIOS setup may differ depending on the product. Using System Setup 94 z x c z Setup Menu x Setup Items c Help Descriptions of the selected item are displayed. System Setup Screen Menu Main Advanced Security Boot Exit Function Changes the basic system. Configures the advanced functions on your computer. Enables the security functions, including passwords. Specifies the order of the boot devices and configures them. Specifies how to exit System Setup. Using System Setup 95 System Setup Buttons(Keys) The following Buttons(keys) are used in System Setup. When an external keyboard is connected, you can use the keys enclosed in parenthesis. For example, you can press the F1 key instead of the Auto Scaler button. Setup Key Button Function Auto Scaler Button (F1) When pressing the Auto Scaler button, Help appears. When pressing the button again, Help disappears. Up & Down Keys ( , ) Move the joystick up or down to move the cursor up and down. Left & Right Keys ( , ) Move the joystick left or right to move the cursor left or right. u3(F5) / u1(F6) Press the u3 (F5) / u1 (F6) u3 and u1 buttons to change the value of an item. u4(Esc) Enter
(F9)
(F10) Press the u4 button to return to a higher-level menu or to move to the Exit menu. Selects an item or opens a submenu. To initialize the setup settings, press the F9 key on the external keyboard. If an external keyboard is not connected, select Exit >
Load Setup Default from the setup menu. To save the changes press the F10 key on the external keyboard. If an external keyboard is not connected, select Exit >
Exit Saving Changes from the setup menu. Exiting the System Setup z Move to Exit menu > Exit Saving Changes using the joystick and press the Enter. x Select Yes and press the Enter button. The System Setup is closed and Windows is started. Using System Setup 96 Setting a Booting Password When setting a password, you have to enter the password to start up the computer or enter the System Setup. By configuring a supervisor password, you can restrict system access to authorized users only and protect data and files saved on the computer. Before You Start!
Do not lose or forget your password. If you have forgotten your password, contact a Samsung service center. In this case, a service fee will be charged. For the setup buttons, refer to the description of 'System Setup Keys'. Page 107 Setting a Supervisor Password A Supervisor Password is required to turn the computer on or to start System Setup. When setting a Supervisor Password, users other than a supervisor cannot use the computer. 1 Select the Security menu in the System Setup. 2 In the Set Supervisor Password item, press <Enter>. Setting a Booting Password 97 3 On the screen, the password setting buttons are described. You can set a password by entering numbers between 1 and 4 with the joystick. Since the u2 button is used as Delete (BackSpace) and the u4 button is used as Cancel
(Esc), enter the password using the joystick. Up: 1 Left: 4 Right: 2 Next: 3 Enter a password, press <Enter>, re-enter the password for confirmation, and press
<Enter> again. 4 When a message confirming the password configuration appears in the [Setup Notice]
window, press <Enter>. The supervisor password has been set. The supervisor password is required to turn the computer on or to enter System Setup. Setting a User Password Users can start the system with their user password, but cannot enter the System Setup. Before configuring a user password, a supervisor password must have been configured. Deactivating the supervisor password also deactivates the user password. However, please note that deactivating a user password does not deactivate the supervisor password. In the Set User Password item, press <Enter> and complete the procedures of Step 3 of Setting a Supervisor Password. Activating the Booting Password Before activating the booting password, a supervisor password must have been configured. Set the Password on boot option to Enabled. From now on, system booting will not proceed without the password. Setting a Booting Password 98 supervisor password in the Set Supervisor Password item, press<Enter>. Deactivating the Password 1 On the password to be deactivated, press <Enter>. For example, to deactivate a 2 In the Enter Current Password item, enter the currently configured password and 3 Leave the Enter New Password item field empty, and press <Enter>. 4 Leave the Confirm New Password field empty, and press <Enter>. 5 In the [Setup Notice] window, press <Enter>. press <Enter>. The password is deactivated. Setting a Booting Password 99 Changing the Booting Priority The default booting priority of your computer is the CD-ROM, a removable device and the hard disk drive in this order. You can change the booting priority using the Boot menu of the System Setup. 1 Select the Boot menu in System Setup. 2 Press <Enter> on the Boot Device Priority item. 3 Use the u1 or u3 button to move a booting device up. 4 Exit from the Boot menu by pressing the u4 button and move to the Exit > Exit Saving Changes menu using the joystick and press <Enter> to save the settings and exit the setup. Changing the Booting Priority 100 Using the Battery Please refer to the following instructions when running the computer on battery power, without connecting the AC power. A Lithium-Ion smart battery is supplied with this computer. Before You Start!
Carefully read and follow the precautions printed on the battery before using the battery. 60C, as this may cause fire. Precautions Use only charges specified in the user's guide. Never heat the battery pack, put it near or in a fire or use at a temperature higher than Never cause a short circuit between the battery pack terminals or disassemble the Carefully read and follow the precautions printed on the battery and the safety Please refer to the system operation environment of this manual and operate and the instructions in the user's guide before using the battery. battery pack. store the battery at room temperature. (p.xx) Removing and Attaching Battery 1 Shutdown the system and place the computer upside down on a flat surface. 2 Pull the two battery latches outwards (
), then remove the battery. Battery Latch 3 To install the battery again, slide the battery into the system. The battery latches move inwards and fix the battery automatically. Check if the battery latch has been moved inwards. Charging the Battery 1 Attach the battery and connect the AC adapter to the DC-in jack of the computer. The battery will then be charged. Using the Battery 101 2 When a charge is complete, the Charge LED turns green. Status Charging Charging complete AC adapter not connected Charge LED Amber Green Off Monitoring the Battery Charge You can view the battery charge status by completing the following procedures. Viewing through the Menu button Press the Menu button and press on Battery. Viewing through the Control Panel Select the Start > Control Panel > Performance and Maintenance > Power Options >
Power Meter tab. z Power Supply Status x Remaining Battery Charge z x Using the Battery 102 Viewing on the battery Separate the battery and press the PUSH button on the battery. The remaining battery charge
(%) will be displayed. Battery Warning You will hear an alarm when the remaining battery charge reaches below 10%. In this case, connect the AC adapter or turn off the computer and install a fully charged battery. When the remaining battery charge is under 3%, the computer automatically saves the current work and turns off. This may differ according to the settings in the Control Panel > Performance and Maintenance > Power Options > Alarms tab. Using the Battery A battery is an expendable supply, so when using it for a long time, the capacity/battery life is shortened. If the battery life is reduced to under half of the initial time, we recommend that you purchase a new battery. For long periods of not using the battery, keep the battery after discharging it. This extends the battery life time. Using the Battery 103 Extending the Battery Usage Time Using Samsung Battery Manager Battery Manager is a power management program that enables using battery power efficiently. You can select an optimized power mode according to your requirements. Click Start > All Programs > Samsung > Samsung Battery Manager > Samsung Battery Manager. Change Power Mode Power Saving Effects You can only change the detailed configuration in Custom Mode. Maximum Battery Saving Mode This mode is appropriate for conditions which require the maximum battery usage time. This may degrade the performance of the system. Normal Mode This mode is appropriate for normal conditions. Both system performance and battery usage time are optimized. Maximum Performance Mode This mode is appropriate for conditions that require maximum system performance. Therefore, the battery usage time may be reduced in this mode. Custom Mode In this mode, a user can configure a detailed configuration to save the battery usage time. You can adjust the LCD brightness, the system standby time, the screen color quality, and the graphic mode values. Using the Battery 104 Power Saving Effect This shows the relative battery usage time for each power mode. The more effective the power saving, the longer the graph will appear. When Running a Game or Multimedia Application A game or multimedia application may not work smoothly in Maximum Battery Saving Mode. Using this is recommended when the AC adapter is connected or in Normal or higher modes. Samsung Battery Manager Power Modes Since the Maximum Battery Saving Mode of the Samsung Battery Manager controls the system operating speed to extend the battery usage time, the performance of the system may be degraded. When changing the power settings in Custom Mode in the Samsung Battery Manager, To use Normal Mode in Samsung Battery Manager after reinstalling Windows XP, you the settings of the Power Options Properties window are changed accordingly. have to install the Samsung Battery Manager using the system software media. Turning Off Unnecessary Devices Turning off unnecessary devices extends the battery usage time. 1 Select the Start > Control Panel > Performance and Maintenance > System >
2 Right-click(press and hold the Stylus Pen for more than 3 seconds) a device you are not Hardware tab and click on Device Manager. using, and select Disable. Example) Wireless LAN, Bluetooth, etc. Using the Battery 105 Battery Calibration When charging/discharging the battery repeatedly for only a short time, the battery usage time may be reduced by the difference between the actual battery charge and the remaining charge display. In this case, the actual battery charge and the remaining charge display will be the same by discharging the battery completely using the Battery Calibration function, and then recharging it again. 1 Disconnect the AC power adapter after turning off the system. 2 Restart your computer and press the Menu button when the SAMSUNG logo appears, to 3 Using the arrow keys, select Smart Battery Calibration in the Boot menu and press start System Setup. Enter. 4 Highlight Yes in the [Battery Calibration Confirmation] window and press Enter. The Battery Calibration function is activated and the battery is discharged by force. To stop the operation press the u4 (Esc) button. This operation requires 3~5 hours depending on the battery capacity and the remaining battery charge. Using the Battery 106 Tips for Using Your Computer The following information helps you avoid potential problems as you use your computer:
Do not try to disassemble your computer. Opening the system chassis voids your warranty. Only an authorised manufacturer service center can replace or add any parts inside the chassis. Follow all the instructions and cautions in your computer user documentation. The LCD has a polarized surface and can be damaged easily. To prevent damage, avoid touching the screen. Use only approved AC adapters, auto adapters, memory modules and other options. Because a notebook computer is small and has restricted air flow around components, it is more likely to overheat than a desktop computer. A fan inside your computer runs when needed to help eliminate heat. Make sure the fan vent on the left side of your computer is not blocked when you use the computer. Occasionally check the vents and remove any accumulated dust on the outside. Avoid using or storing the computer in extremely hot or cold areas, such as a car on a hot day. Keep the computer away from heaters and out of direct sunlight. Exposure to excessive heat may damage computer components. If you have left your computer in a hot place, let it cool down slowly to room temperature (with the LCD panel open) before using it. Do not remove the memory-module compartment door, or try to install a memory module when the computer is on. Set up your computer work area to avoid physical strain. Sit with your back straight and supported by your chair. Adjust your chair or work table so that your arms and wrists can remain in a relaxed position, parallel with the floor. Avoid bending or twisting your wrists as you work. Your hands should float slightly above the keyboard. Refer to a book on office ergonomics for more information on setting up your work area. Take frequent breaks from working at the computer to rest your eyes and stretch your muscles. Remember to save your data files frequently and to make backup copies of your files. A walkie-talkie must be kept more than 1 meter away from the device. Since a walkie-talkie transmits a very strong signal, it may cause a computer malfunction. Using the Battery 107 Travelling with Your Computer Air Travel If you are travelling by air, follow these tips:
Take the computer with you as carry-on luggage. Do not check the computer with your baggage. Allow the computer and disks to go through the X-ray security devices. Do not hand-carry disks through the walk-through metal detectors, which can cause loss of data. Be prepared to turn off the computer during take off and landing. Please follow the instruction of the corresponding facilities regarding the use of wireless devices (wireless LAN, Bluetooth , etc.) when in a wireless communication restricted area
(e.g. airplane, hospital , etc.). Handling Spills Do not spill anything on your computer. The best way to avoid spills is to avoid eating and drinking around your computer. If you do spill something on your computer, turn off your computer, unplug it immediately, and do the following:
If you spill liquid on the keyboard, drain as much of the liquid from the keyboard as possible. Be careful not to let the liquid drip onto the LCD panel. Allow the system to dry for several days before trying to use it. If you spill liquid on an external keyboard or keypad, unplug it and drain as much of the liquid as possible. Allow the keyboard to sit at room temperature for a full day before trying to use it. Sweet liquids leave a sticky residue that may jam the keyboard despite your efforts to dry it. If you spill liquid on the LCD panel, clean it immediately with a soft cloth and denatured alcohol or a proprietary LCD screen cleaner. Do not use water, window cleaner, acetone, aromatic solvent, or dry, rough towels to clean it. Some liquids damage the polarized LCD screen. If your screen is damaged, contact your authorized manufacturers service center for a replacement. Storing the Computer for Long Periods If you will not be using the computer for a long period of time (a month or more), you should discharge the battery completely then remove the battery from the computer. This extends the life of the battery. Using the Battery 108 Chapter 7. Troubleshooting / Appendix Using Magic Doctor Using Norton AntiVirus Restoring the System Reinstalling Software Reinstalling Windows XP Running the System Recovery Media Quick Installation Standard Installation Installing Windows When You Cannot Run Windows Questions and Answers Windows Related Display Related Sound Related Wired LAN Related Wireless LAN Related Games and Programs Related Security Center Other Specifications System Specification Wireless LAN Specification (Optional) 110 111 112 115 117 117 118 118 120 121 121 121 123 124 125 129 131 133 134 134 135 Using the Battery 109 Using Magic Doctor Magic Doctor is troubleshooting software provided by Samsung Computer. A user can diagnose system problems via one-click or by selecting diagnostic items. 1 Click Start > All Programs > Samsung > Magic Doctor > Magic Doctor. 2 Click on an icon at the top of the screen. OneClick Diagnosis: You can diagnose problems affecting the system connections and system operations via one-click. User Diagnosis: You can select the necessary diagnostic items and diagnose system problems. System Recovery: Launches the Restoring the System function of Windows XP. (p141) 3 When the system diagnosis is completed, the diagnostic result appears. If problems are found, click the Cure button to correct the problem. Magic Doctor starts the correction operations. Using Magic Doctor 110 Using Norton AntiVirus The Norton AntiVirus software is provided as the virus inspection program. Before You Start!
When you first run Norton AntiVirus, the Norton AntiVirus Configuration window pops up. If you complete the configuration and your computer connect to network, you can download and install the latest updates via the network. When the live update is done, virus scanning starts automatically. To stop scanning, click on Stop. If you didnt configure the Norton AntiVirus program, a security alert icon (
) appears in the notification area on the right of the task bar. This indicates that the current security state of your computer is not secure. Configure the virus-scanning program to make the security alert icon disappear. 1 Select Start > All Programs > Norton AntiVirus > Norton AntiVirus 200x. 2 Click Scan Virus, select drive to inspect, and click Scan. Vaccines for the latest viruses can be downloaded by connecting to Symantecs homepage. 3 If a virus is detected, select Automatic in Norton AntiVirus, and click Next to delete the virus. Using Norton AntiVirus 111 Restoring the System This description is only for models running Window XP. The System Restore function allows you to restore your computer to an earlier copy (called restore point), and restores the settings if a problem occurs.The System Restore function is provided by Windows XP to enable the resolution of various problems without reinstalling Windows XP completely. You can use System Restore in the following cases. The system files are deleted or damaged by mistake. The system is unstable or a problem occurs in a device driver. A problem occurs after changing system files such as the registry. A problem occurs after installing a new program. Creating a Restore Point Restore points are created at predetermined times and at times of significant system events such as when a program or a driver is installed. You can also decide when to create your own restore points. There has to more than 200MB of free space on the hard disk drive. If the disk space is insufficient, a saved restore point might be deleted. You are recommended to create a restore point when you have purchased a new computer and before installing new programs or device drivers. Before creating a restore point, check that the computer is operating properly. The procedures to create your own restore point are described below. 1 Click Start > All Programs > Accessories > System Tools > System Restore. 2 Select "Create a restore point", and click Next. Restoring the System 112 Since changes made after the Recovery Point may not be maintained, please back-up all necessary files to another location before performing system recovery. 3 In the Restore point description box, type a name to identify the restore point, and than click Create. A restore point has been created. Returning your computer to an earlier restore point The procedures to return your computer to an earlier restore point when a problem has occurred are described below. 1 Click Start > All Programs > Accessories > System Tools > System Restore. 2 Select "Restore my computer to an earlier time", and then click Next. Restoring the System 113 3 Select the desired restore date from the calendar restoration and select the desired restore point from the list, and then click Next. The date of the restore point is displayed in bold font. 4 Confirm the selected restore point and click Next. System Restore shuts down Windows, 5 After the restoration is complete, Windows restarts. In the [System Restore completed]
and starts the restoration processes. dialog, click OK.Your computer has been restored to the selected restore point. Undoing the last restoration The procedures to undo a restoration are described below. 1 Click Start > All Programs > Accessories > System Tools > System Restore. 2 Select "Undo my last restoration", and then click Next. 3 Confirm the restoration information to undo, and than click Next. System Restore shuts 4 After the undo restoration is complete, Windows restarts. In the [Undo the last restoration completed] dialog, click OK.Your computer has been restored to the point prior to the last restoration. down Windows and starts undoing the restoration. Restoring the System 114 Reinstalling Software If you have reinstalled the Windows operating system, or the system and program do not operate properly, you can re-install the driver and program using the system software Media. Before You Start!
If a program has a problem, it is recommended to remove the program using Add or Remove Programs in the Control Panel and to reinstall it using the system software media. To use the system software media, the external USB ODD must be connected to the computer. The following descriptions presuppose that the external USB ODD is connected. This computer is optimized for Microsoft Windows XP, therefore drivers for other operating systems are not included on the System Software Media. Running the system software Media Insert the system software Media into the CD-ROM drive. The initial screen appears automatically. Standard Installation: This displays a list of drivers or programs that are not currently installed on your computer from the system software Media provided. All necessary components are installed using the factory defaults. Minimum Installation: This displays the components (driver, Windows programs, etc) that, if not installed, may cause problems with the system performance. You can install only required components. Custom Installation: You can customize the installation of drivers and programs. Reinstalling Software 115 Installing drivers and programs 1 Click Standard Installation in the main window of the System Software Media. 2 The system is scanned to display the drivers and programs that need to be installed. 3 Click OK. The drivers and programs are automatically installed as factory defaults.
(Standard Installation is recommended) 4 When done, restart the system. Reinstalling Software 116 Reinstalling Windows XP If Windows XP is not operating properly due to an error in the system, or if you have replaced the hard disk drive, you can reinstall Windows XP using the system recovery media. Before You Start!
To use the system recovery media, the external USB ODD must be connected to the computer. The following descriptions presuppose that the external ODD is connected. There are two Windows installation modes: Standard Installation, which allows users to If you cannot run Windows, refer to page 128 to install Windows. change options, and Quick Installation, which allows users to install Windows easily. Reinstalling Windows may delete the data on the hard disk drive such as files, programs, etc. In order to minimize damage from data loss, please remember to always back up your data. Samsung Electronics is not liable for any data loss. Running the System Recovery Media Insert the system recovery media into the external USB ODD. The start screen automatically appears. Standard Installation You can change the settings for Regional and Language Options, Date and Time, Computer Name, User Accounts, etc. during the Windows installation. However, after reinstalling Windows, you have to manually reinstall device drivers and programs using the system software media. Quick Installation This reinstalls Windows with the user data and the system settings intact by overwriting the Windows folder. Since the user data and the system settings in the already existing Windows folders are preserved, you do not have to reinstall device drivers and programs. Reinstalling Windows XP 117 Quick Installation The Windows Quick Installation procedures are described below. You can install using the Stylus Pen. 1 In the system recovery media start screen, click Quick Installation. 2 The description for the Quick Installation appears. Click Yes to start Windows installation. When the installation is complete, the Windows Desktop appears. Remove the system recovery media from the ODD. Standard Installation The Windows Standard Installation procedures are described below. For the Standard Installation, a USB keyboard is required. The following descriptions suppose that the external USB ODD and USB keyboard are connected. 1 In the system recovery media start screen, click Standard Installation. Reinstalling Windows XP 118 2 The description for the Standard Installation appears. Click Yes to start the Windows installation. The system restarts and the Windows installation begins. If you have set a booting password, enter the booting password when booting the system to continue the installation. 3 After the system has restarted, the message 'Press any key to boot from DVD'
appears. Do not press any key at this time. After a while the partition setting screen appears. To not change the partition, move to the C:Partition 2 using the direction key ( ) and press <Enter>. Partition setting is a function that divides the hard disk drive into one or several partitions. Note that changing the partition deletes all of the data on the hard disk drive. 4 Select the folder to install the Windows operating system. To delete the previous version of Windows and install in the current folder, press <L> on the keyboard. If you press the ESC key to select another folder for the installation, new Windows folders are created causing a risk of dual booting. 5 After the installation process copies the necessary folders for the Windows installation, restart the system, and the message "Press any key to boot from DVD" is displayed. You do not need to enter anything. In a moment, the Windows XP installation screen will appear to proceed with the installation. 6 When the Regional and Language Options window appears, click Next. 7 When a window that requires your name and organization pops up, enter your name and the organization and click Next. A window that requires the computer name and the administrator password appears. Enter the computer name and the administrator password and click Next. 8 When the Date and Time Settings window appears, click Next. Setup continues and 9 When the system restarts, the message "Press any key to boot from DVD" is the system restarts. displayed. You do not need to enter anything. In a moment, the Windows XP Desktop appears. When you see the Windows desktop, this means that the installation process is completed. 10 Remove the system recovery media and install the device drivers and applications from the system software media. (Page 123) Reinstalling Windows XP 119 Installing Windows When You Cannot Run Windows If you cannot run Windows, you have to boot the system with the system recovery media and reinstall Windows. To install Windows, the external USB ODD and USB keyboard must be connected to the computer. Before you install Windows, you must have to connect external USB Keyboard. If you connect external USB keyboard while installing Windows, USB keyboard does not work. on. displayed. You do not need to press anything. 1 Insert the system recovery media into the external USB ODD and turn the computer 2 When the system restarts, the message "Press any key to boot from DVD" is 3 After a while the partition setting screen appears. To install Windows in the selected 4 Select a file system (format). To keep the current file system, press <Enter>. 5 Select the folder to install the Windows operating system. partition without change, press <Enter>. To delete the previous version of Windows and install in the current folder, press <L> on the keyboard. 6 The subsequent procedures are the same as those after Step 5 of <Standard Installation>. (Page 127) Reinstalling Windows XP 120 Questions and Answers This section provides information on possible problems, solutions and other references for system use. Windows Related Q1 The system does not shutdown properly. A When the system does not shutdown normally, press and hold the Power button until the system manually shuts off. If the Power-Saving Mode is configured into the Power button, press and hold for more than 4 seconds to shut the system off. When the system is turned on after such manual shutdown, Scandisk will run to check errors in the system. Q2 The system freezes during program operation A1 There is an error with the program currently being used. Press the <Ctrl>, <Alt>, and
<Del> keys simultaneously and click End Task in the [Windows Task Manager] window. A2 There is an error with the Windows OS. Reboot the system by using the Power button. Display Related Q1 The LCD screen is too dark or too bright A Adjust the LCD brightness. Press the Menu button and click on Brightness UP or Brightness Down. Q2 The screen saver disturbs Media Player playing a movie or video clip after the screen saver is activated while Media Player is playing. Unselect Tools > Options > Player > Allow screen saver during playback in the Media Player. A Q3 In the following cases, the screen blinks or displays noise for a short time A Click the Graphics Related tab, Change Resolution, Change Display Device, Remove the AC Adapter, Restart the System, Change Power Mizer level.) This may happen while the video driver is examining the connected device. While busy detecting, any connected display devices may blink or some noise may occur. In addition, pressing the Auto Scaler button, the screen may blink or display noise for a short time while the resolution changes or the Down Scale (resolution zoom out) function operates. Questions and Answers 121 Q4 When I connect a projector, and change the settings to display the screen image on both the LCD and the projector by pressing the Menu button, the screen is not displayed properly. Press the Menu button and press the LCD/CRT twice to select LCD+CRT. If the screen image or some part of it is not displayed on the screen, this is because the LCD resolution is low or the current resolution is too wide and cannot be supported by the projector. Press the Auto Scaler button and change the resolution to 800x600 pixels. A Q5 The shortcut icons are not displayed on the screen. A The shortcut icons only appear when both the Magic Keyboard and Samsung Display Manager programs are installed. Q6 When I connect an external monitor and select the monitor, no screen image A is displayed (Clone Mode). This may happen when the current resolution is inappropriate or Dual View (Extended Mode) is selected. Try the following methods. 1. When the current resolution is inappropriate This computer supports the 800x480 WVGA resolution. Since this resolution is lower than that of the operating system, the above symptom may appear when the external monitor cannot support this resolution. Change the resolution to 800x600 pixels, press the Menu button and press the LCD/CRT twice to select LCD+CRT. 2. When Dual View (Extended mode) is selected When Dual View is selected, the Clone Mode is not supported. In this case, unselect the Dual View, press the Menu button to select the Clone Mode. For the procedures to unselect the Dual View, refer to (page 36). Q7 In the Display Properties window, resolution starts from 800x600. A Even if the current resolution is 800x480 pixels, it may be represented as 800x600 in the Display Properties. This is because the lowest resolution of the operating system is 800x600 and is unable to show the 800x480 resolution in the Display Properties window. Q8 Pressing [Start] displays a [Some items cannot be shown] message. A This message appears when all start menu items cannot be displayed in the default resolution (800x480 pixels). In this case, change the resolution to 1024x600 Q9 The whole screen image is not displayed on the screen. A This may happen when a program or game is designed for at least 800x600 pixels. In this case, press the Auto Scaler button and change the resolution. Whenever the button is pressed, the screen resolution changes to 800X480 > 800x600 >1024x600 pixels, in this sequence. Questions and Answers 122 Q10 When I press the Auto Scaler button, letters on the screen are blurry. A In resolutions provided by Auto Scaler, the letters on the screen may be blurred because these are not the optimal resolutions of the LCD panel. In this case, press the Auto Scaler button again and change the screen resolution to 800x480 pixels which is the default resolution of the LCD panel. Sound Related Q1 How to install and uninstall the sound driver A To install or uninstall the sound driver from this system, please follow the procedures below. Sound Driver Components The sound driver consists of the following 3 components and the 3 components are automatically installed during the installation.
- High Definition Audio - KB888111: Microsoft UAA Bus Driver for High Definition Audio
- SoundMAX: SoundMAX Integrated Digital HD Audio
- WOW XT and TSXT Filter Driver: SRS Uninstalling the Sound Driver To remove the sound driver due to a problem or for an update, follow the procedures below. If you do not follow the sequence below, the sound driver may not be removed or the reinstalled driver, or may not work properly. z Select Start > Control Panel > Add or Remove Programs. x Remove WOW XT and TSXT Filter Driver first. c Remove SoundMAX and restart the computer. Reinstalling the Sound Driver If there is an already installed sound driver, uninstall the driver according to the procedures above. The sound driver is included on the System Software Media. z Connect the external USB ODD and insert the System Software Media into the ODD. x Select the Sound Driver on either Standard Installation or Custom Installation, then the 3 components of the sound driver are automatically installed. Q2 How can I use an additional function when making a recording using the A microphone?
To use an addition function so as to record sound by emphasizing the sound between the two microphones, configure the settings as follows. z Click Start > Control Panel > Sound, Speech and Audio Devices > SoundMAX. x In the Microphone Peripherals, select 'Directional Beam' and click the OK button. Questions and Answers 123 Wired LAN Related Q1 The <Wake On LAN> function A
<Wake On LAN> is a function that activates the system from standby (S3) when a signal
(such as ping or magic packet commands) arrives from the network (wired LAN). Using the <Wake On LAN> function z Click on My Network Place> View network connections on the Desktop. x Right-click the Local Area Connection (press and hold the Stylus Pen for more than 3 seconds) and click Properties. c Click Configure, and select the Power Management tab. Select 'Allow this device to bring the computer out of standby', then click OK. Restart the system.
- If the system in standby mode is activated when there is no received signal, use the system after disabling the <Wake On LAN> function.
- When turning the power off when <Wake On LAN> is disabled, the LAN LED may continue to be lit up.
- The <Wake On LAN> function operates only when the LAN is ON.
- Connecting a wired LAN while using a wireless LAN may not activate the <Wake On LAN> function. Set the Wireless LAN to 'Disable' to use the <Wake On LAN> function. z Click on My Network Place> View network connections on the Desktop. x Right-click(press and hold the Stylus Pen for more than 3 seconds) over Wireless Network Connection and select Disable. Q2 When I am connected to a 100Mbps wired LAN and the computer exits standby/hibernation mode, a message appears informing of a connection to a 10Mbps wired LAN. A When the computer exits standby/hibernate mode, restoring the network takes about 3 seconds. When the network is restored, it operates at 100Mbps. Q3 To use the network at the maximum data rate, configure the following A options. Click Start > Control Panel > Performance and Maintenance > System >
Hardware > Device Manager > Network adapters and Right-click(press and hold the Stylus Pen for more than 3 seconds) Marvell Yukon88E8036 PCI-E Fast Ethernet Controller and click Properties > Advanced. Configure as follows and click the OK button. z BatteryModeLinkDetection : EnergyDetect+
x BatterySpeedSettings : FullSpeed Questions and Answers 124 Wireless LAN Related Q1 The Wireless LAN device is operating properly, but I cannot connect to the Internet or to another computer. This is due to an incorrect configuration, or a configuration error. Check the following check lists:
A1 If you are using a computer-to-computer (Ad Hoc) network connection, check that the name of the configured network (SSID) is correct. The network name (SSID) is case sensitive. A2 If you are using a network key (encryption key), you have to use the same network keys for an AP (Access Point) or a computer-to-computer network (Ad Hoc). The network key of the AP is configured in the AP management program. Ask your network administrator or AP manager for more detailed information. A3 Check that the device driver is properly installed. If the driver is not properly installed, you will find a yellow exclamation mark on the network icon by clicking Start > Control Panel > Performance and Maintenance > System > Hardware tab > Device Manager >
Network adapters > Wireless LAN adapter. If there is a yellow exclamation mark, please reinstall the device driver with the system software Media. A4 Referring to A2 of Q3, Check that the network bridge configuration is correct. Q2 The signal strength is excellent, but I cannot connect to the network. Even if the signal strength is excellent, the network connection may not operate properly if the TCP/IP properties are not properly configured, or the network key (encryption key) is incorrect. A1 Check that the TCP/IP properties are configured properly. When you connect to an AP, click the Wireless Network Connection icon on the taskbar and select the Support tab. If the IP is not allocated properly, the IP address will be displayed as follows (e.g. 169.254.xxx.xxx). If the network does not provide DHCP, you have to specify the correct IP address by asking your network administrator. Even if the network provides DHCP, the server may not allocate an IP address to the client properly, and the client station cannot connect to the network. A2 Referring to A2 of Q1, check that the network key is correct. A3 Referring to Q4, check that AP is operating properly. Q3 I cannot connect to the AP. A1 Verify whether the wireless LAN function of the computer is on by doing the following. If Check the Computer Settings the wireless LAN function is off, turn it on.
- For Windows XP, verify that the wireless network connection has been set to "Enable"
in Start > Control Panel > Network Connections.
- Check if the wireless LAN is turned on. Questions and Answers 125 A2 Verify whether the same network key (encryption key) has been entered in both the AP and the computer. The network key is an encryption key for encrypting data transmitted between the AP and the computer. It is recommended setting the network key manually. Check the AP Settings For the AP settings, refer to the User's Guide provided by the AP manufacturer. A3 Verify whether the environment is suitable for using a wireless LAN. The use of a wireless LAN may be restricted according to the environment and distance. Obstacles such as walls or doors affect the use of a wireless LAN. Install the AP in a high and open space 50cm from the wall and far removed from any other radio signal sources. A4 Verify whether the AP is operating properly.
- When the AP is not operating normally, turn off the AP and after a short while turn it on again.
- Verify whether the AP's firmware is the most recent version. (Contact the AP manufacturer or the place where you purchased the AP for details of the AP firmware.) A5 Verify whether the AP has been properly connected to the network. Verify whether the network is operating normally by connecting the wired network cable, which has been connected to the AP, to your computer. A6 Check the network key settings (encryption key). When automatic code conversion (a passphrase function) has been selected and data communication is not functioning even with a normal wireless connection, it is recommended entering the network key (encryption key) manually. A7 Check the AP settings as follows. (The following is recommended for a standard environment and thus may differ according to the specific wireless network environment.)
- When several APs are present simultaneously, check the channel setting for each AP. When different APs are using nearby channels, interference may occur between electronic waves. Set the APs' channels further apart from each other. (Ex: Ch1, Ch5, Ch9, Ch13)
- When an AP's SSID (Service Set ID) option is set to "Hide", you cannot search for that AP on the computer. We recommend canceling the "Hide" option for an AP. The SSID is a name for distinguishing one wireless LAN from another wireless LAN.
- It is recommended using Long Preamble. Preamble is a signal for data transmission synchronization. Short Preamble may be supported by some types of APs but may cause compatibility problems.
- It is recommended using a static IP.
- Since static channel selection is more reliable than auto channel selection, it is recommended setting a static channel. Questions and Answers 126 Q4 In the Windows XP 'Available wireless networks' window, the Wireless Network Connection is displayed as 'Not Available'. A1 Check if the wireless LAN is turned on. A2 Check if there is additional program for a wireless LAN connection installed. Windows XP supports wireless LAN connections through the Wireless Zero Configuration (WZC) service. Therefore, an additional program for wireless LAN connection is not required, unless the network requires a specific program. However, installation of some wireless LAN related programs may sometimes disable the [View Available Wireless Networks]
window supported by WZC service. Exit the wireless LAN related program then check whether the window is enabled. A3 Initialize the device driver. Click Start > Control Panel > Performance and Maintenance > System > Hardware tab
> Device Manager > Network adapters, and select the wireless LAN adapter. Right-click the network adaptor and select 'Disable'. Then right-click over the network adaptor and select 'Enable' after a short wait to check that the device is operating properly. A4 Right-click the My computer icon, and select Manage. When the Computer Management window appears, double-click Services and Applications on the left, and then click Services from the sub menu tree. Select the Standard tab in the right pane, double-click Wireless Zero Configuration and check that Startup Type is configured to Automatic, and the Service status is Started. A5 In the case of Windows XP, click Advanced in the [Wireless Network Connection] dialog box (see "Connecting to an Access Point (AP)" (p44)) and make sure that 'Use Windows to configure my wireless network settings' is selected. This may happen when a third-party wireless network setup program (e.g. PROSet) other than Windows XP default program is installed. For setting up a wireless network using the Windows XP program, this option should be selected. Q5 When connecting to a computer-to-computer (Ad Hoc) network, I cannot connect to another computer connected to the same computer-to-computer network. A1 Make sure that the security settings and network name of the computer-to-computer (Ad Hoc) network is correct. A2 Check the TCP/IP properties of the computers to be connected through the computer-
to-computer (Ad Hoc) network. All of the computers to be connected through a computer-to-computer (Ad Hoc) network should be configured so that their IP addresses are within the same subnet range.
- If the TCP/IP Settings are configured to DHCP, the address is automatically configured to an address within the subnet IP range. This will take about 2~3 minutes.
- If the IP address is configured to static IP in TCP/IP properties, select Use the following IP address in the TCP/IP properties of the wireless adapter, configure IP address:10.0.0.1~10.0.0.254, and Subnet mask: 255.255.0.0, and then try again.
- A fixed IP is recommended for a small-size network. Questions and Answers 127 A A Q6 When using a computer-to-computer (Ad Hoc) network, sometimes I cannot search the access point. It may happen occasionally when you are using a computer-to-computer (Ad Hoc) network connection. Even if you cannot find some access points, the computer-to-
computer (Ad Hoc) network is operating properly. Click Refresh to view the latest search result. Q7 The network does not operate properly when both the wireless and the wired network connections are simultaneously configured with the same IP address. You cannot use the wireless and the wired network connections using the same IP address simultaneously. To use either the wireless or the wired network in turn with the same IP address, you have to Disable whichever network device will not be using in the network connection of the Control Panel. Q8 The wireless LAN does not work properly when there is a device operating on an adjacent frequency in the vicinity of the product. A1 Channel interference may occur when a wireless video transceiver or a microwave oven is being used.If you experience channel interference from other equipment, it is recommended changing the channel to connect to the AP. For more information about AP settings, refer to the User Manual supplied by the AP manufacturer. A2 Since IEEE802.11g equipment operates in hybrid mode when there is active IEEE802.11b equipment, the data rate may be degraded. Q9 An established wireless LAN connection is disconnected after 2~3 minutes, and the connection is not recovered. A1 This may be caused by channel interference. Change the channel of the AP, and reconnect. A2 This may be caused by selecting the Use IEEE 802.1x network authentication option when IEEE 802.1x authentication is not available. Check the properties of the AP in the wireless network settings. If the Use IEEE 802.1x authentication in this network option is selected, deselect the option on the Authentication tab. For more detailed information about authentication server, ask your network administrator. A3 If the AP is configured to Use network authentication (Shared Key) If the AP is configured to authentication shared mode, all computers to be connected should be configured as follows:
If you are using Windows XP, select network authentication(shared mode) in the wireless network settings. Select Start > Control Panel > Network and Internet Connections > Network Connections, right-click the Wireless Network Connection icon and then select View Available Wireless Networks. Questions and Answers 128 Select Change Advanced Settings from the left menu, select an AP from Preferred networks window in the Wireless Networks tab, and click the Properties button. Select Shared Mode in the Network Authentication field of the Association tab, and then click the OK button. If the Preferred networks window in the Wireless Network tab is empty, click View Wireless Networks, select an AP to connect to, and select Shared Mode in the Network Authentication field of the Connection Information tab as described above. For more detailed network authentication procedures, ask your AP (Access Point) administrator. Q10 After Wireless LAN Setup Program is installed, The AEGIS Protocol (IEEE 802.1x) v2.2.1.0 appears in the [Local Area Connection Properties] window. The AEGIS Protocol is a security authentication protocol that is automatically installed when Wireless LAN Setup Program is installed and does not affect the operation of other programs. Q11 I want to use the Wireless LAN power saving function to extend the system battery use time. You can configure this in the Samsung Battery Manager program. Run the Samsung Battery Manager and select Options > Wireless LAN Power Saving > On from the menu. However, this setting may affect the performance of the Wireless LAN. In addition, the wireless LAN connection might be disconnected while configuring this. Games and Programs Related Q1 3D game is not executed, or some functions are not working. A Change the graphic setting of the game to '2D' or 'Software Renderer', then execute the program again. Q2 While playing a game, pressing the Menu button or pressing the LCD/CRT item does not work or the screen is not properly displayed. Some games and 3D application programs may change the display device control. Therefore, pressing the Menu button and clicking the LCD/CRT item may terminate the running program or may display an abnormal screen. Press the Menu button and press the LCD/CRT item before launching a program and do not press these buttons while running the program. Q3 Running speed of a game is too slow or fast. A Change the setting of Power Schemes to 'Always On'.
(Click Start > Control Panel > Performance and Maintenance > Power Options > Power Schemes tab, then configure the Power schemes field to 'Always On'.) Questions and Answers 129 A A A Q4 Some part of a game image is not displayed or is displayed in black. A This may happen when running a game designed for DirectX 8.1, such as NHL 2003, MVP Baseball 2003, etc. Q5 The game screen is displayed small. A z Right-click on the Desktop and select Properties from the pop-up menu. x In the [Display Properties] window, select the Settings tab > Advanced > Intel Graphics Media Accelerator Driver for Mobile tab. c Select the Display Device menu and click on 'Notebook' in the 'Single Display'
field. v Select the Display Setting menu, click 'Full Screen' in the Extended Display field and click the Apply button. Q6 The picture is not displayed properly for some games. A Some games such as 'Harry Potter and the Sorcerer's Stone', 'Harry Potter and the Chamber of Secrets', etc. may not display the picture properly when the screen resolution is set to 1024x768 and the color quality is set to 32 bit. For these games, set the screen resolution to 1024x768, and the color quality to 16 bit. Q7 Game play is not displayed smoothly on the screen. A For 3D games, the texture data for the 3D screen display is saved to the system memory. If there is insufficient system memory, the data is saved to the hard disk drive and loaded to memory when required. This operation may temporarily stop displaying the picture on the screen. In this case, lower the game resolution or the screen settings. (For Delta Force: Black Hawk Down, Medal of Honor, Battle Field, 1942, etc.) Q8 If I run a program, an error message appears or the program does not launch. A This may happen when the program does not support the 800x480 pixels resolution. This is caused by a program that is designed for a minimum resolution of 800x600 pixels and fails to support a resolution lower than its minimum resolution. In this case, change the screen resolution to 800x600 pixels or press the Auto Scaler button to change the resolution. Questions and Answers 130 Security Center Q1 To change the popup window display settings when connected to the Internet. In the Windows XP SP2 environment, you can decide whether to display a popup window when connected to the Internet, for user convenience and security. A1 To display most of the popup windows when connected to the Internet:
z Click on Internet Options in Start > Control Panel > Security Center > Manage security settings for. x In the Privacy tab of Internet Properties, clear Block pop-ups. A2 To display popup windows only from the current site when connected to the Internet:
Place the cursor on the notification area at the bottom of the Internet address bar and right-click to display a menu, from which you can select Temporarily Allow Pop-ups or Always Allow Pop-ups from This Site. A3 To display popup windows from a particular site:
z Click on Internet Options in Start > Control Panel > Security Center > Manage security settings for. x In the Privacy tab of Internet Properties, click on Settings from Block pop-ups. c Enter a URL to want to allow pop-ups into Address of Web site to allow and click on Add. v You will find that the entered address is added to the allowed sites list. The next time you connect to the Web site, you will see pop-ups appearing. When you need to re-block a permitted site, select the Web site address that you want to block from the Allowed Sites and click on Remove. Q2 When you connect to a Web site, you see the message, To help protect your security, Internet Explorer stopped this site from installing an ActiveX control on your computer or This site might require the following ActiveX control below the address bar. A Windows XP SP2 blocks unsigned ActiveX controls from being installed when connected to certain Web sites for security reasons. On some Web sites that have no ActiveX controls installed, applications are not started or do not display properly. In this case, to install ActiveX controls, right-click the notification area to display a menu from which you can select Install ActiveX control. Q3 When you see a Windows Security Alert icon (
) appear on the right part of the task bar. With the Security Center feature added, Windows XP SP2 checks the Firewall, the automatic updates configuration and installation of virus-checking programs to display a Windows Security Alert icon on the right part of the task bar when it judges that the computer is vulnerable to attacks from the Internet. In this case, check the following to install the necessary components. Questions and Answers 131 A1 Set up the Windows Firewall. When you set up the Windows Firewall, you will be protected from unauthorized access through the Internet or the network. z Click on Windows Firewall in Start > Control Panel > Security Center > Manage security settings for. x From the General tab of Windows Firewall, select ON (recommended). c If you want to allow a certain program or service to gain access to your computer using the Firewall, select and check the program or service that you want to allow access from, in the Exceptions tab of the Windows Firewall. If you want to add a program to Programs and Services, click on Add Program and select it. A2 Set up Windows Automatic Updates. This automatically downloads and installs critical updates via the Internet to keep your computer up to date. z Click on Automatic Updates in Start > Control Panel > Security Center > Manage security settings for. x From general tab of Automatic Updates window, select Automatic (recommended). A3 Keep your computer current with the latest virus updates. (ex: Norton Antivirus) Even when you have installed Norton AntiVirus on your computer, Windows cannot recognize the program until you configure the settings, displaying a Security Alert icon. When you first use or install Norton AntiVirus for the first time, follow the Registration Wizard steps to configure the registration settings. To protect your computer from virus attacks with the latest updates, click on Options to display the Norton AntiVirus Options window. From the left menu of the window, check Run Automatic Protection to select Automatic Protection and check Run LiveUpdate to select LiveUpdate. A4 Two virus scanning programs on one computer may cause system conflicts. Remove one of the programs from the system. A5 If Windows does not recognize the existence of an anti-virus program even when it has been installed, your computer could be vulnerable to attacks from the Internet. You should install an anti-virus program that your computer is able to identify. Check the following programs which Windows can detect and select one from the list. A list of anti-virus programs that Windows can detect:
-Symantec Norton Anti-Virus
-NetworkAssociates (McAfee)
-TrendMicro
-ComputerAssociates
-Panda
-Kaspersky
-Ahnlabs (AhnLab) Visit the Microsoft Web site (www.microsoft.com) regularly to check the latest list. Questions and Answers 132 Other Q1 I cannot run any functions. A1 This may happen when the computer is in the HOLD status. In the HOLD status, the Charging LED blinks for a moment. Slide the HOLD switch downwards and try again. A2 If the computer is running on battery power, check the battery charge status. Q2 The [Power Switch] and the [AVStation now] switch do not work. A1 This may happen when the computer is in the HOLD status. In the HOLD status, the Charging LED blinks for a moment. Slide the HOLD switch downwards and try again. A2 To use the switch, you have to slide and hold the switch for more than 0.1 seconds. Slide and hold the switch for more than 0.1 seconds before releasing it. A3 If the computer is running on battery power, check the battery charge status. Questions and Answers 133 Specifications System Specification The system specifications will be described below. The system specifications may differ depending on the derived models. Item CPU Cache memory Main memory Main Chipset Hard disk drive (HDD) Graphics Sound Network Interface CF Card Slot Ports Specification Intel Celeron M ULV Celeron (512KB) 256MB ~ Max 1GB, Memory type : DDR2 SODIMM Intel 915GMS / 400 MHz FSB Support, Intel ICH6-M 1.8" HDD20 ~ 60GB Intel 915GMA 900 Graphics AD1986 (2CH) Remarks Optional Optional Optional Optional Optional Optional Wired LAN: Marvell Yukon 88E8036 PCI-E Fast Ethernet Controller Broadcom BCM4401E 10/100 Wireless LAN: 802.11BG Bluetooth 2.0+EDR Optional Optional Optional Type I and II Compatible USB 2.0 x 2, Video (Monitor) Out Port, Headphone Jack, Wired LAN Port, DC-in Jack, External ODD Power Port Optional 7" WVGA (800x480) 227.5 x 138 x 24~25.7 Dimensions (mm) LCD Weight Battery Operation Environment Temperature (storage) : -5 ~ 40C (operation) : 10 ~ 32 C Humidity (storage) : 5% ~ 90% (operation) : 20% ~ 80%
Lithium-Ion smart battery: 3 Cells 779g (without Bluetooth) W x D x H Optional Operation Voltage Frequency Output Power Output Voltage 100 - 240 VAC 50 - 60 Hz 60W 19.0VDC The system specifications are subject to change without notice. For detailed system specifications, refer to the product catalog. The capacity of the hard disk drive with Samsung Recovery Solution will be displayed as less than the specified capacity. Specifications 134 Wireless LAN Specification (Optional) Atheros AR5006EX Wireless Network Adapter Device Product Specification Item Physical Specifications Detailed Specifications Dimensions
(Width X Height) 59.75 X 44.70 mm operation temperature and humidity Same as system operation Power Specification Power Saving Mode Receiving Mode Transmission Mode Power Temperature: 0C ~ 70C Humidity: 95%
726mW 1.353W 2.046W 3.3V Network Specifications Compatibility IEEE 802.11g, IEEE 802.11b Operating System Microsoft Windows XP
- NDIS5 Miniport Driver Media Access Protocol CSMA/CA (Collision Avoidance) with Acknowledgement(ACK) Security Wired Equivalent Privacy support (WEP) 64bit / 128bit
*WPA, *CCX
* This piece of equipment supports the Wi-Fi wireless LAN security standard, WPA (Wi-Fi Protected Access) and CCX (Cisco Compatible eXtensions). To connect to a wireless network consisting of the WPA and CCX, certificates or Atheros Client Utility may be required depending on the network settings. For more information, ask your network administrator. Radio Specifications RF Band 2.4 GHz Support Channels Channels allowed per country. Device Transceiver Modulation Scheme 11b Mode: DSSS, CCK 11g Mode: OFDM Standard Output Power MAX 10 mW
*Transmission Rate
**11g mode: 54, 48, 36, 24, 18, 12, 9, 6 Antenna Type 11b mode: 11, 5.5, 2, 1 1ea internal antennas (main)
* The data rate may differ from the real data transmission rate.
**11g mode is supported only when device is connected with an IEEE 802.11g device. (e.g. Access Point supported IEEE 802.11g) Specifications 135 Abbreviations A . Amperes AC . Alternating current ACPI. Advanced Configuration and Power management Interface APM . Advanced Power Management ATA . AT attachment (refers to the hard-drive interface in an AT-
compatible computer) ATAPI. AT attachment packet interface BBS . Bulletin board system BIOS . Basic input/output system C . Centigrade CD . Compact disc CD-ROM . Compact disc read-only memory cm . Centimeters COM. Communication (as in communication port) CMOS . Complementary metal-oxide semiconductor DC . Direct current DMA. Direct memory access DPMS . Display power-management signaling DRAM. Dynamic random access memory DSTN . Double layer super twist nematic ECP . Extended capabilities port EPP . Enhanced parallel port g . gram G . Gravity GB . Gigabytes hr. hour Hz . Hertz IDE . Integrated drive electronics I/O. Input/output IRQ . Interrupt request line ISA. Industry Standard Architecture KB . Kilobytes kg . Kilograms LAN . Local-area network lb. . Pounds LBA . Logical block addressing LCD . Liquid-crystal display m. Meters mA. Milliampere mAhr . Milliampere hour Abbreviations 136 MB . Megabyte mm . millimeter MPEG . Motion Picture Experts Group MPU . Microprocessor unit ms . Millisecond PDF . Portable document format PC . Personal computer PCI. Peripheral component interconnect PCMCIA . Personal Computer Memory Card International Association POST . Power-on self-test PNP . Plug and play PS/2 . Personal System/2 RAM . Random-access memory ROM. Read-only memory SVGA . Super video graphics array TFT . Thin-film transistor USB . Universal serial bus V . Volt VAC . Voltage alternating current VCC . Voltage collector current VDC . Voltage direct current whr . Watt hour Abbreviations 137 Glossary AC adapter The AC (or alternating current) adapter regulates current coming into your computer from the wall outlet. The current at the wall outlet is alternating current and needs to be changed by the adapter to DC (direct current) before your computer can use it for power. ACPI ACPI (Advanced Configuration and Power Interface)- a method for describing hardware interfaces in terms abstract enough to allow flexible and innovative hardware implementations and concrete enough to allow shrink-wrap OS code to use such hardware interfaces. BIOS BIOS stands for basic input/output system. The BIOS is software (often called firmware) that is independent of any operating system. It enables the computer to communicate with the screen, keyboard, and other peripheral devices without using programs on the hard disk. The BIOS on your computer is flash BIOS, which means that it has been recorded on a flash memory chip that can be updated if needed. Boot To start your computer. A cold boot resets the entire computer and runs through all computer self-tests. A warm boot clears out computer memory only. Boot disk A disk containing operating system programs required to start your computer. A boot disk can be a floppy disk, hard drive, or compact disc. Byte The basic unit of measure for computer memory. A charactersuch as a letter of the alphabetuses one byte of memory. Computer memory is often measured in kilobytes (1,024 bytes) or megabytes (1,048,576 bytes). Each byte is made up of eight bits. For more information on bytes and bits, see an introductory book on computers. Cache memory Cache is very fast, zero-wait-state memory located between the microprocessor and main memory. Cache reduces the average time required by the microprocessor to get the data it needs from the main memory by storing recently accessed data in the cache. CardBus CardBus technology enables the computer to use 32-bit PC Cards. Hardware in the computer and the Windows operating system provide support for the 32-bit cards. The voltage of 32-bit cards (3.3 volts) is lower than that of 16-bit cards (5 volts). The 32-bit cards can transmit more data at a time than the 16-bit cards, thus increasing their speed. CMOS memory CMOS (complementary metal oxide semiconductor) memory is powered by the CMOS battery. The System Setup settings and other parameters are maintained in CMOS memory. Even when you turn your computer off, the information in CMOS memory is saved. Glossary 138 COM port COM stands for communication. COM ports are the serial ports in your computer. Compact Disc A compact disc (CD). Conventional memory The first 640 KB of system memory. Operating systems and application programs can directly access this memory without using memory-management software. Disk The device used by the computer to store and retrieve information. Disk can refer to a floppy disk, hard disk, or RAM disk. Disk cache A software device that accumulates copies of recently used disk sectors in RAM. The application program can then read these copies without accessing the disk. This, in turn, speeds up the performance of the application. A cache is a buffer for transferring disk sectors in and out of RAM. Data stored in a disk cache is a copy of data already stored on the physical disk. DMA (direct memory access) A method of transferring data from a device to memory without having the data pass through the microprocessor. Using DMA can speed up system performance. DPMS Display Power Management Signalling. Displays or monitors that comply with this can be managed by the Power Management features found in the system setup. Floppy disk A removable disk, also called floppy or diskette. Hard drive Also called fixed disk. A hard drive is connected to the computer and can be installed or removed. Data written to a hard drive remains until it is overwritten or corrupted. The 2.5-inch hard drive in your computer was designed for use in a notebook computer. Because hard drives in notebook computers are smaller than those in desktop computers, their maximum storage capacity may be less than that of desktop hard drives. However, because of their smaller size, the drives handle shock and vibration better than larger drives, which is important for a notebook computer. I/O Input/output. Refers to peripheral devices, such as printers, that are addressed through an I/
O address. I/O address I/O stands for input/output. Peripheral devices, such as printers, are addressed through the I/O port address. IRQ (interrupt request line) The IRQ is a hardware line that a device uses to signal the microprocessor when the device needs the microprocessors services. The number of IRQs is limited by industry standards. LCD (liquid-crystal display) The LCD screen on your computer differs from the display screen of a desktop monitor. Most desktop monitors use CRT (cathode-ray tube) displays, which work by moving an electron Glossary 139 beam across phosphor dots on the back of the screen. The phosphor dots light up to show the image. LCDs use a liquid-crystal solution between two sheets of polarizing material. Electric current passing through the liquid aligns the crystals so that light can or cannot pass through them, creating an image. MB (megabyte) 1,024 kilobytes. Megabit 1,048,576 bits or about 128 kilobytes. Operating system A program that supervises the computer's operation, including handling I/O. Application programs and users can request operating-system services. A user might request operation-
system services to copy files or format a disk. An application program might use the operating system to obtain keyboard input, write data to a file, or write data to a screen. PC Card PC Card stands for personal computer card. The Personal Computer Memory Card International Association (PCMCIA) defines the standards used to develop all PC Cards. PC Card types include: modems, Ethernet adapters, SCSI adapters, ATA cards, and memory cards. PC slot The PC slot is the hardware slot in the computer where the PC Card is placed. Pixel A pixel is an individual dot in a graphic displayed on your computer. The pixels are so close together that they look as though they are connected. An LCD screen displays thousands or millions of pixels. Plug and Play A plug and play operating system automatically configures computer components to work with your system. With this type of operating system, you normally do not need to set jumpers on devices or set memory addresses or IRQs. RAM (random access memory) The computer's system memory, including conventional and extended memory. You can write to and read from RAM. Information stored in RAM is temporary, and is erased when the system is turned off. Refresh rate The refresh rate is the rate at which the image on the LCD screen is rewritten to the screen. A fast refresh rate helps keep the image from flickering. Resolution The resolution is the sharpness or clarity of the image on your LCD screen. Resolution is measured by the number of pixels the computers screen can display. For example, a resolution of 800 x 600 means that the screen can display 800 pixels in row and can display 600 rows. The more pixels displayed, the higher the resolution and the better the image. ROM (read-only memory) Permanent computer memory dedicated to a particular function. For example, the instructions for starting the computer when you first turn on power are contained in ROM. You cannot write to ROM. (ROM is not the same as RAM). Glossary 140 Sector Also known as disk sector. The portion of a track that is numbered and can hold a specified number of characters (usually 512 KB). Shadow RAM A write-protected area of RAM that contains a copy of the BIOS. As the computer boots, the BIOS is copied from its permanent location in ROM to RAM. The BIOS can be executed much faster in RAM than in ROM. The BIOS remains in shadow RAM until you turn off the computer. TFT (thin film transistor) LCD A TFT LCD uses a separate transistor circuit to control each pixel. This technology provides the best resolution for an LCD screen. A TFT LCD is also sometimes called an active matrix LCD. Glossary 141 Index A AP / AP Connection Auto Scaler Button AVStation NOW AVStation premium B Battery Battery Calibration Battery Remaining Charge BIOS (BIOS, Setup) Setting Bluetooth / Help Booting Priority C Charge Click Control Panel Creating a Document CyberLink PowerDVD D Desktop / Change Dual View DVD Play I Internet Sharing M Magic Doctor Maximum Battery Saving Mode Menu Button Monitor Connection / Output Multimedia Music Play N Network Network Status Diagnosis Norton AntiVirus O Overviews 53 29 87 77 112 116 113 106 65 111 112 22 43 47 71, 95 40 35 94, 95 58 118 114 29 34 70 78, 90 49 62 120 16 P Password Playlist Program Program Launcher Q Quick Launch Button R Resolution / Color S Samsung Battery Manager Samsung Network Manager Samsung Update Plus Shared Server Shared Client Slideshow Small Office Network Specifications SRS Status Indicators Stylus Pen T Tablet PC Input Panel Writing Pad Character Pad On-Screen Keyboard Touchkit U User Account / Switch User V Video Play Volume Control W Windows XP Wired Network Wireless Network Wireless LAN Service 109 78 70 75 30 46 114 56 73 59 60 82 53 141 30 16 22 24 24 25 26 23 44 84, 93 28 38 50 53 53 Index 142 Regulatory Compliance Statements Wireless Guidance Low power, Radio LAN type devices (radio frequency (RF) wireless communication devices), operating in the 2.4 GHz Band, may be present (embedded) in your notebook system. The following section is a general overview of considerations while operating a wireless device. Additional limitations, cautions, and concerns for specific countries are listed in the specific country sections (or country group sections). The wireless devices in your system are only qualified for use in the countries identified by the Radio Approval Marks on the system rating label. If the country you will be using the wireless device in, is not listed, please contact your local Radio Approval agency for requirements. Wireless devices are closely regulated and use may not be allowed. The power output of the wireless device or devices that may be embedded in your notebook is well below the RF exposure limits as known at this time. Because the wireless devices (which may be embedded into your notebook) emit less energy than is allowed in radio frequency safety standards and recommendations, manufacturer believes these devices are safe for use. Regardless of the power levels, care should be taken to minimize human contact during normal operation. This transmitter must not be collocated or operate in conjunction with any other antenna or transmitter except the installed Bluetooth transmitter. Some circumstances require restrictions on wireless devices. Examples of common restrictions are listed below:
Radio frequency wireless communication can interfere with equipment on commercial aircraft. Current aviation regulations require wireless devices to be turned off while traveling in an airplane. 802.11B/G (also known as wireless Ethernet or Wifi) and Bluetooth communication devices are examples of devices that provide wireless communication. vi Users Manual In environments where the risk of interference to other devices or services is harmful or perceived as harmful, the option to use a wireless device may be restricted or eliminated. Airports, Hospitals, and Oxygen or flammable gas laden atmospheres are limited examples where use of wireless devices may be restricted or eliminated. When in environments where you are uncertain of the sanction to use wireless devices, ask the applicable authority for authorization prior to use or turning on the wireless device. Every country has different restrictions on the use of wireless devices. Since your system is equipped with a wireless device, when traveling between countries with your system, check with the local Radio Approval authorities prior to any move or trip for any restrictions on the use of a wireless device in the destination country. If your system came equipped with an internal embedded wireless device, do not operate the wireless device unless all covers and shields are in place and the system is fully assembled. Wireless devices are not user serviceable. Do not modify them in any way. Modification to a wireless device will void the authorization to use it. Please contact manufacturer for service. Only use drivers approved for the country in which the device will be used. See the manufacturer System Restoration Kit, or contact manufacturer Technical Support for additional information. Regulatory Compliance Statements vii United States of America USA and Canada Safety Requirements and Notices Do not touch or move antenna while the unit is transmitting or receiving. Do not hold any component containing the radio such that the antenna is very close or touching any exposed parts of the body, especially the face or eyes, while transmitting. Do not operate the radio or attempt to transmit data unless the antenna is connected; if not, the radio may be damaged. Use in specific environments:
The use of wireless devices in hazardous locations is limited by the constraints posed by the safety directors of such environments. The use of wireless devices on airplanes is governed by the Federal Aviation Administration (FAA). The use of wireless devices in hospitals is restricted to the limits set forth by each hospital. Explosive Device Proximity Warning Do not operate a portable transmitter (such as a wireless network device) near unshielded blasting caps or in an explosive environment unless the device has been modified to be qualified for such use. viii Users Manual Use On Aircraft Caution Regulations of the FCC and FAA prohibit airborne operation of radio-
frequency wireless devices because their signals could interfere with critical aircraft instruments. Other Wireless Devices Safety Notices for Other Devices in the Wireless Network: Refer to the documentation supplied with wireless Ethernet adapters or other devices in the wireless network. The Part 15 radio device operates on a non-interference basis with other devices operating at this frequency. Any changes or modification to said product not expressly approved by Samsung could void the user's authority to operate this device. Unintentional Emitter per FCC Part 15 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Written by: Daryl L. Osden This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generate uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Regulatory Compliance Statements ix If necessary, the user should consult the dealer or an experienced radio/television technician for additional suggestions. The user may find the following booklet helpful:
Something About Interference. This is available at FCC local regional offices. Our company is not responsible for any radio or television interference caused by unauthorized modifications of this equipment or the substitution or attachment of connecting cables and equipment other than those specified by our company. The correction will be the responsibility of the user. Use only shielded data cables with this system. Intentional emitter per FCC Part 15 Low power, Radio LAN type devices (radio frequency (RF) wireless communication devices), operating in the 2.4 GHz Band, may be present (embedded) in your notebook system. This section is only applicable if these devices are present. Refer to the system label to verify the presence of wireless devices. Wireless devices that may be in your system are only qualified for use in the United States of America if an FCC ID number is on the system label. This transmitter must not be collocated or operate in conjunction with any other antenna or transmitter except the installed Bluetooth transmitter. Operation of this device is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation of the device. Wireless devices are not user serviceable. Do not modify them in any way. Modification to a wireless device will void the authorization to use it. Contact manufacturer for service. x Users Manual Canada Unintentional Emitter per ICES-003 This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus as set out in the radio interference regulations of Industry Canada. Le prsent appareil numrique nmet pas de bruits radiolectriques dpassant les limitesapplicables aux appareils numriques de Classe B prescrites dans le rglement sur le brouillage radiolectrique dict par Industrie Canada. Intentional Emitter per RSS 210 Low power, Radio LAN type devices (radio frequency (RF) wireless communication devices), operating in the 2.4 GHz Band, may be present (embedded) in your notebook system. This section is only applicable if these devices are present. Refer to the system label to verify the presence of wireless devices. Wireless devices that may be in your system are only qualified for use in Canada if an Industry Canada ID number is on the system label. The power output of the wireless device (or devices), which may be embedded in your notebook, is well below the RF exposure limits as set by Industry Canada. This transmitter must not be collocated or operate in conjunction with any other antenna or transmitter except the installed Bluetooth transmitter. Operation of this device is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation of the device. To prevent radio interference to licensed service, this device is intended to be operated indoors and away from windows to provide maximum shielding. Equipment (or its transmit antenna) that is installed outdoors is subject to licensing. Wireless devices are not user serviceable. Do not modify them in any way. Modification to a wireless device will void the authorization to use it. Contact manufacturer for service. Regulatory Compliance Statements xiii European Union European Union CE Marking and Compliance Notices Products intended for sale within the European Union are marked with the Conformit Europene (CE) Marking, which indicates compliance with the applicable Directives and European standards and amendments identified below. This equipment also carries the Class 2 identifier. The following information is only applicable to systems labeled with the CE mark European Directives This Information Technology Equipment has been tested and found to comply with the following European directives:
. EMC Directive 89/336/EEC with amending directives 92/31/EEC & 93/68/
EEC as per EN 55022 Class B EN 61000-3-2 EN 61000-3-3 EN 55024 Low Voltage Directive (Safety) 73/23/EEC as per EN 60950(A1/A2/A3/A4/
A11) Radio and Telecom Terminal Equipment Directive 199/5/EC as per CTR21 (if fitted with a modem device) ETS 300 328 (if fitted with a 2.4 GHz band embedded wireless device) ETS 301 489-1 (if fitted with a 2.4 GHz band embedded wireless device) ETS 301 489-17 (if fitted with a 2.4 GHz band embedded wireless device) European Radio Approval Information
(for products fitted with EU-approved radio devices) This Product is a Notebook computer; low power, Radio LAN type devices (radio frequency (RF) wireless communication devices), operating in the 2.4 GHz band, may be present (embedded) in your notebook system which is intended for home or office use. This section is only applicable if these devices are present. Refer to the system label to verify the presence of wireless devices. Regulatory Compliance Statements xv Wireless devices that may be in your system are only qualified for use in the European Union or associated areas if a CE mark with the Alert Symbol is on the system label. The power output of the wireless device or devices that may be embedded in you notebook is well below the RF exposure limits as set by the European Commission through the R&TTE directive. See 802.11b and 802.11g restrictions for specific countries or regions within countries under the heading European Economic Area Restrictions below. Translated Statements of Compliance
[English]
This product follows the provisions of the European Directive 1999/5/EC.
[Danish]
Dette produkt er i overensstemmelse med det europiske direktiv 1999/5/EC
[Dutch]
Dit product is in navolging van de bepalingen van Europees Directief 1999/5/EC.
[Finnish]
Tm tuote noudattaa EU-direktiivin 1999/5/EC mryksi.
[French]
Ce produit est conforme aux exigences de la Directive Europenne 1999/5/EC.
[German]
Dieses Produkt entspricht den Bestimmungen der Europischen Richtlinie 1999/5/EC
[Greek]
1999/5/C.
[Icelandic]
essi vara stenst regluger Evrpska Efnahags Bandalagsins nmer 1999/5/EC
[Italian]
Questo prodotto conforme alla Direttiva Europea 1999/5/EC.
[Norwegian]
Dette produktet er i henhold til bestemmelsene i det europeiske direktivet 1999/5/EC.
[Portuguese]
Este produto cumpre com as normas da Diretiva Europia 1999/5/EC. xvi Users Manual
[Spanish]
Este producto cumple con las normas del Directivo Europeo 1999/5/EC.
[Swedish]
Denna produkt har tillverkats i enlighet med EG-direktiv 1999/5/EC. European Economic Area Restrictions Local Restriction of 802.11b/802.11g Radio Usage
[Note to integrator: The following statements on local restrictions must be published in all end-user documentation provided with the system or product incorporating the Wireless product.]
Due to the fact that the frequencies used by 802.11b/802.11g wireless LAN devices may not yet be harmonized in all countries, 802.11b/802.11g products are designed for use only in specific countries or regions, and are not allowed to be operated in countries or regions other than those of designated use. As a user of these products, you are responsible for ensuring that the products are used only in the countries or regions for which they were intended and for verifying that they are configured with the correct selection of frequency and channel for the country or region of use. Any deviation from permissible settings and restrictions in the country or region of use could be an infringement of local law and may be punished as such. The European variant is intended for use throughout the European Economic Area. However, authorization for use is further restricted in particular countries or regions within countries, as follows:
General European standards dictate maximum radiated transmit power of 100 mW effective isotropic radiated power (EIRP) and the frequency range 2400 2483.5 MHz. Belgium The product may be used outdoors, but for outdoor transmissions over a distance of 300m or more, a license from the BIPT is required. This restriction should be indicated in the manual as follows:
Dans le cas d'une utilisation prive, l'extrieur d'un btiment, au-dessus d'un espace public, aucun enregistrement n'est ncessaire pour une distance de moins de 300m. Pour une distance suprieure 300m un enregistrement auprs de l'IBPT est requise. Pour une utilisation publique l'extrieur de btiments, une licence de l'IBPT est requise. Pour les enregistrements et licences, veuillez contacter l'IBPT. Regulatory Compliance Statements xvii France For Metropolitan departments:
2.400 - 2.4835 GHz for indoor use. 2.400 -2.454 GHz (channels 1 to 7) for outdoor use. For Guadeloupe, Martinique, St Pierre et Miquelon, Mayotte:
2.400 - 2.4835 GHz for indoor and outdoor use. For Reunion, Guyane:
2.400 - 2.4835 GHz for indoor use. 2.420 - 2.4835 GHz for outdoor use (channels 5 to 13) xviii Users Manual
1 2 3 | Users Manual 2 | Users Manual | 99.42 KiB | March 28 2006 |
Regulatory Compliance Statements Wireless Guidance Low power, Radio LAN type devices (radio frequency (RF) wireless communication devices), operating in the 2.4 GHz Band, may be present (embedded) in your notebook system. The following section is a general overview of considerations while operating a wireless device. Additional limitations, cautions, and concerns for specific countries are listed in the specific country sections (or country group sections). The wireless devices in your system are only qualified for use in the countries identified by the Radio Approval Marks on the system rating label. If the country you will be using the wireless device in, is not listed, please contact your local Radio Approval agency for requirements. Wireless devices are closely regulated and use may not be allowed. The power output of the wireless device or devices that may be embedded in your notebook is well below the RF exposure limits as known at this time. Because the wireless devices (which may be embedded into your notebook) emit less energy than is allowed in radio frequency safety standards and recommendations, manufacturer believes these devices are safe for use. Regardless of the power levels, care should be taken to minimize human contact during normal operation. This transmitter must not be collocated or operate in conjunction with any other antenna or transmitter except the installed Bluetooth transmitter. Some circumstances require restrictions on wireless devices. Examples of common restrictions are listed below:
Radio frequency wireless communication can interfere with equipment on commercial aircraft. Current aviation regulations require wireless devices to be turned off while traveling in an airplane. 802.11B/G (also known as wireless Ethernet or Wifi) and Bluetooth communication devices are examples of devices that provide wireless communication. vi Users Manual In environments where the risk of interference to other devices or services is harmful or perceived as harmful, the option to use a wireless device may be restricted or eliminated. Airports, Hospitals, and Oxygen or flammable gas laden atmospheres are limited examples where use of wireless devices may be restricted or eliminated. When in environments where you are uncertain of the sanction to use wireless devices, ask the applicable authority for authorization prior to use or turning on the wireless device. Every country has different restrictions on the use of wireless devices. Since your system is equipped with a wireless device, when traveling between countries with your system, check with the local Radio Approval authorities prior to any move or trip for any restrictions on the use of a wireless device in the destination country. If your system came equipped with an internal embedded wireless device, do not operate the wireless device unless all covers and shields are in place and the system is fully assembled. Wireless devices are not user serviceable. Do not modify them in any way. Modification to a wireless device will void the authorization to use it. Please contact manufacturer for service. Only use drivers approved for the country in which the device will be used. See the manufacturer System Restoration Kit, or contact manufacturer Technical Support for additional information. Regulatory Compliance Statements vii United States of America USA and Canada Safety Requirements and Notices Do not touch or move antenna while the unit is transmitting or receiving. Do not hold any component containing the radio such that the antenna is very close or touching any exposed parts of the body, especially the face or eyes, while transmitting. Do not operate the radio or attempt to transmit data unless the antenna is connected; if not, the radio may be damaged. Use in specific environments:
The use of wireless devices in hazardous locations is limited by the constraints posed by the safety directors of such environments. The use of wireless devices on airplanes is governed by the Federal Aviation Administration (FAA). The use of wireless devices in hospitals is restricted to the limits set forth by each hospital. Explosive Device Proximity Warning Do not operate a portable transmitter (such as a wireless network device) near unshielded blasting caps or in an explosive environment unless the device has been modified to be qualified for such use. viii Users Manual Use On Aircraft Caution Regulations of the FCC and FAA prohibit airborne operation of radio-
frequency wireless devices because their signals could interfere with critical aircraft instruments. Other Wireless Devices Safety Notices for Other Devices in the Wireless Network: Refer to the documentation supplied with wireless Ethernet adapters or other devices in the wireless network. The Part 15 radio device operates on a non-interference basis with other devices operating at this frequency. Any changes or modification to said product not expressly approved by Samsung could void the user's authority to operate this device. Unintentional Emitter per FCC Part 15 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Written by: Daryl L. Osden This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generate uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help. Regulatory Compliance Statements ix If necessary, the user should consult the dealer or an experienced radio/television technician for additional suggestions. The user may find the following booklet helpful:
Something About Interference. This is available at FCC local regional offices. Our company is not responsible for any radio or television interference caused by unauthorized modifications of this equipment or the substitution or attachment of connecting cables and equipment other than those specified by our company. The correction will be the responsibility of the user. Use only shielded data cables with this system. Intentional emitter per FCC Part 15 Low power, Radio LAN type devices (radio frequency (RF) wireless communication devices), operating in the 2.4 GHz Band, may be present (embedded) in your notebook system. This section is only applicable if these devices are present. Refer to the system label to verify the presence of wireless devices. Wireless devices that may be in your system are only qualified for use in the United States of America if an FCC ID number is on the system label. This transmitter must not be collocated or operate in conjunction with any other antenna or transmitter except the installed Bluetooth transmitter. Operation of this device is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation of the device. Wireless devices are not user serviceable. Do not modify them in any way. Modification to a wireless device will void the authorization to use it. Contact manufacturer for service. x Users Manual European Union European Union CE Marking and Compliance Notices Products intended for sale within the European Union are marked with the Conformit Europene (CE) Marking, which indicates compliance with the applicable Directives and European standards and amendments identified below. This equipment also carries the Class 2 identifier. The following information is only applicable to systems labeled with the CE mark
. European Directives This Information Technology Equipment has been tested and found to comply with the following European directives:
EMC Directive 89/336/EEC with amending directives 92/31/EEC & 93/68/
EEC as per EN 55022 Class B EN 61000-3-2 EN 61000-3-3 EN 55024
Low Voltage Directive (Safety) 73/23/EEC as per EN 60950(A1/A2/A3/A4/
A11)
Radio and Telecom Terminal Equipment Directive 199/5/EC as per CTR21 (if fitted with a modem device) ETS 300 328 (if fitted with a 2.4 GHz band embedded wireless device) ETS 301 489-1 (if fitted with a 2.4 GHz band embedded wireless device) ETS 301 489-17 (if fitted with a 2.4 GHz band embedded wireless device) European Radio Approval Information
(for products fitted with EU-approved radio devices) This Product is a Notebook computer; low power, Radio LAN type devices (radio frequency (RF) wireless communication devices), operating in the 2.4 GHz band, may be present (embedded) in your notebook system which is intended for home or office use. This section is only applicable if these devices are present. Refer to the system label to verify the presence of wireless devices. Regulatory Compliance Statements xv Wireless devices that may be in your system are only qualified for use in the European Union or associated areas if a CE mark with the Alert Symbol is on the system label. The power output of the wireless device or devices that may be embedded in you notebook is well below the RF exposure limits as set by the European Commission through the R&TTE directive. See 802.11b and 802.11g restrictions for specific countries or regions within countries under the heading European Economic Area Restrictions below. Translated Statements of Compliance
[English]
This product follows the provisions of the European Directive 1999/5/EC.
[Danish]
Dette produkt er i overensstemmelse med det europiske direktiv 1999/5/EC
[Dutch]
Dit product is in navolging van de bepalingen van Europees Directief 1999/5/EC.
[Finnish]
Tm tuote noudattaa EU-direktiivin 1999/5/EC mryksi.
[French]
Ce produit est conforme aux exigences de la Directive Europenne 1999/5/EC.
[German]
Dieses Produkt entspricht den Bestimmungen der Europischen Richtlinie 1999/5/EC
[Greek]
1999/5/C.
[Icelandic]
essi vara stenst regluger Evrpska Efnahags Bandalagsins nmer 1999/5/EC
[Italian]
Questo prodotto conforme alla Direttiva Europea 1999/5/EC.
[Norwegian]
Dette produktet er i henhold til bestemmelsene i det europeiske direktivet 1999/5/EC.
[Portuguese]
Este produto cumpre com as normas da Diretiva Europia 1999/5/EC. xvi Users Manual
[Spanish]
Este producto cumple con las normas del Directivo Europeo 1999/5/EC.
[Swedish]
Denna produkt har tillverkats i enlighet med EG-direktiv 1999/5/EC. European Economic Area Restrictions Local Restriction of 802.11b/802.11g Radio Usage
[Note to integrator: The following statements on local restrictions must be published in all end-user documentation provided with the system or product incorporating the Wireless product.]
Due to the fact that the frequencies used by 802.11b/802.11g wireless LAN devices may not yet be harmonized in all countries, 802.11b/802.11g products are designed for use only in specific countries or regions, and are not allowed to be operated in countries or regions other than those of designated use. As a user of these products, you are responsible for ensuring that the products are used only in the countries or regions for which they were intended and for verifying that they are configured with the correct selection of frequency and channel for the country or region of use. Any deviation from permissible settings and restrictions in the country or region of use could be an infringement of local law and may be punished as such. The European variant is intended for use throughout the European Economic Area. However, authorization for use is further restricted in particular countries or regions within countries, as follows:
General European standards dictate maximum radiated transmit power of 100 mW effective isotropic radiated power (EIRP) and the frequency range 2400 2483.5 MHz. Belgium The product may be used outdoors, but for outdoor transmissions over a distance of 300m or more, a license from the BIPT is required. This restriction should be indicated in the manual as follows:
Dans le cas d'une utilisation prive, l'extrieur d'un btiment, au-dessus d'un espace public, aucun enregistrement n'est ncessaire pour une distance de moins de 300m. Pour une distance suprieure 300m un enregistrement auprs de l'IBPT est requise. Pour une utilisation publique l'extrieur de btiments, une licence de l'IBPT est requise. Pour les enregistrements et licences, veuillez contacter l'IBPT. Regulatory Compliance Statements xvii France For Metropolitan departments:
2.400 - 2.4835 GHz for indoor use. 2.400 -2.454 GHz (channels 1 to 7) for outdoor use. For Guadeloupe, Martinique, St Pierre et Miquelon, Mayotte:
2.400 - 2.4835 GHz for indoor and outdoor use. For Reunion, Guyane:
2.400 - 2.4835 GHz for indoor use. 2.420 - 2.4835 GHz for outdoor use (channels 5 to 13) xviii Users Manual
1 2 3 | Antenna Location Photos | Internal Photos | 289.99 KiB | July 25 2006 |
REPORT NO: 06I10409-2 DATE: July 5, 2006 FCC ID: A3L-NP-Q1 KAE Antenna and EUT Location KAE Antenna WLAN COMPLIANCE CERTIFICATION SERVICES This report shall not be reproduced except in full, without the written approval of CCS. Page: 22 of 24 REPORT NO: 06I10409-2 DATE: July 5, 2006 FCC ID: A3L-NP-Q1 Foxconn Antenna and EUT Location Foxconn Antenna WLAN COMPLIANCE CERTIFICATION SERVICES This report shall not be reproduced except in full, without the written approval of CCS. Page: 23 of 24
1 2 3 | ID Label | ID Label/Location Info | 117.63 KiB | March 28 2006 |
Test Report No. : LBE060772 Picture 7. Label Location Picture 8. Label
-21/21-
1 2 3 | Antenna Spec | Parts List/Tune Up Info | 1.11 MiB | July 25 2006 |
Regulatory WLAN Antenna Information (SANTAFE)
(English Language Required for Intel Regulatory Review / Approval)
(OEM/ODM or antenna vendor is required to complete this document with platform antenna information. Remove Intel references and make this your own document) SANTAFE Amphenol KAE Brand Name Model Name Antenna Vendor Antenna Part Number Main Antenna: SS-03-03-076 With WLAN Module WM3B2100
(Check Box) Aux Antenna:
WM3B2200BG WM3B2915ABG WM3945ABG Doc.No.:9.27.05 Rev 0.0 Regulatory WLAN Antenna Information 1/1 Doc.No.:9.27.05 Rev 0.0 Antenna Sample / Antenna Data Requirements for worldwide regulatory approval n o i t c e S Description of Required OEM / ODM Antenna Information 1A Part Number for Antenna only 1B Antenna Manufacturer Name 1C Description of Antenna Type Part number of Antenna Assembly / cable impedance, length & diameter. 1D 1E Main & Aux antenna (Peak Gain W/ cable loss) 1E OR 1F, 1G, 1H 1F Main & Aux antenna (Peak Gain only) 1G VSWR of cable including connector 1H Main & Aux antenna (Cable loss W/ connector) Dimensioned Photographs and Drawings of main &
auxiliary antennas Radiation patterns of antennas loaded in the host platform. Platform model name / number - correlated to antenna manufacturer and antenna part number Photograph(s) or Drawings showing location of antennas in platform. (S. Korea requires photographs of antennas for approval submission). Taiwan requires pictures of each antenna type shown in the system. Mech. drawings / photos with dimensions of antenna locations and distance from end-user (For evaluation of SAR testing requirement). Photograph(s) or Drawings showing the location of all antennas (WLAN, BT, other) and distance between those transmitting antennas. Information will be used to evaluate whether co-location testing is required. 2 3 4 5 6 7 8 EU US / IC Japan Taiwan Required Required Required Required Required Required Required Required Required N/A N/A N/A Required Desired Required Required Required Required Desired Desired Required Required Required Required Required Required Required Required Required Required Required Required S.Korea Required Required N/A Desired Required Required Required Required Required Required Required Required Required Required Desired Required N/A Required Required Required Desired Required Desired Required Required Desired Required
(Photos) Required
(Photos) Required N/A N/A N/A N/A Local representative contact information for LMA/
PARS process. Required N/A N/A N/A Required N/A N/A N/A N/A N/A Regulatory WLAN Antenna Information 2/2 Doc.No.:9.27.05 Rev 0.0 Antenna Information Section 1. Antenna Assembly Specifications Antenna Assembly Summary:
1A Antenna Part Number 1B Manufacture 1C Antenna Type
(P/N:
SS-03-03-081) Main antenna Amphenol KAE Co., Ltd PIFA 1D Cable Assembly Part Number and Information
(P/N:
SS-03-03-076) 50 ohm Coaxial. length: 160mm diameter:
1.37mm Connector:
MHC-231(KAE) 1E
*Peak Gain W/
Cable loss (dBi) 2400-2500MHz 1.71 dBi (peak) 5150-5350MHz 1.80 dBi (peak) 5470-5725MHz 4.79 dBi (peak) 5725-5850MHz 4.79 dBi (peak) 1F Peak Gain w/o Cable Loss
(dBi) 2400-2500MHz 2.10 dBi (peak) 5150-5350MHz 2.41 dBi (peak) 5470-5725MHz 5.45 dBi (peak) 5725-5850MHz 5.48 dBi (peak) 1G VSWR 2400-2500MHz 1.07 max 5150-5350MHz 1.19 max 5470-5725MHz 1.27 max 5725-5850MHz 1.16 max 1H Cable Loss
(dBi) 2400-2500MHz 0.39 dBi (peak) 5150-5350MHz 0.61 dBi (peak) 5470-5725MHz 0.65 dBi (peak) 5725-5850MHz 0.69 dBi (peak)
(P/N:
) Auxiliary antenna Antenna Peak Gain Table:
Frequency (MHz) Hori+Ver
(dBi) 1.71 dB 0.83 dB 0.81 dB 1.80 dB 1.72 dB 1.46 dB 1.99 dB 3.57 dB 4.79 dB 3.85 dB Vertical
(dBi)
-1.71 dB
-2.10 dB
-2.20 dB 1.77 dB 1.67 dB 0.63 dB 0.92 dB 1.51 dB 2.85 dB 2.56 dB Horizontal
(dBi) 0.94 dB
-0.37 dB
-1.40 dB
-2.24 dB
-2.15 dB 0.15 dB 0.30 dB 0.50 dB 1.59 dB 1.74 dB 2400 2442 2484 5150 5250 5350 5470 5600 5725 5850
Antenna Peak Gain required being test in system basis.
1E frame contend absolutely peak antenna gain include H/ V/ H+V. Main antenna Aux Antenna Horizontal
(dBi) Vertical
(dBi) Hori+Ver
(dBi) Regulatory WLAN Antenna Information 3/3 Doc.No.:9.27.05 Rev 0.0 Section 2. Dimensioned Photos or Drawings of Antennas Include a dimensioned photo and dimensioned drawing of main antenna here. Main Antenna Dimensioned Drawing:
Regulatory WLAN Antenna Information 4/4 Doc.No.:9.27.05 Rev 0.0 Main Antenna Photo:
Regulatory WLAN Antenna Information 5/5 Doc.No.:9.27.05 Rev 0.0 Section 3. Radiation characteristics of antennae Loaded in Host Platform 1. Main antenna Radiation pattern and gain 1.1 H-Phi(horizontal) 1.2 H-Theta(vertical) Regulatory WLAN Antenna Information 6/6 Doc.No.:9.27.05 Rev 0.0 1.3 H-Phi+ H-Theta 1.4 Peak gain (dBi) summary Frequency (MHz) Horizontal 2400 2442 2484 5150 5250 5350 5470 5600 5725 5850 0.94 dB
-0.37 dB
-1.40 dB
-2.24 dB
-2.15 dB 0.15 dB 0.30 dB 0.50 dB 1.59 dB 1.74 dB Vertical
-1.71 dB
-2.10 dB
-2.20 dB 1.77 dB 1.67 dB 0.63 dB 0.92 dB 1.51 dB 2.85 dB 2.56 dB Hori+Ver 1.71 dB 0.83 dB 0.81 dB 1.80 dB 1.72 dB 1.46 dB 1.99 dB 3.57 dB 4.79 dB 3.85 dB Regulatory WLAN Antenna Information 7/7 Doc.No.:9.27.05 Rev 0.0 Section 4. Host Platform Information OEM / ODM Host platform: (XXXXXXX) platform correlated to antenna data Rating Label Photo:
Module Location Photo: (if Singapore required) Regulatory WLAN Antenna Information 8/8 Doc.No.:9.27.05 Rev 0.0 Section 5. Antenna Host Platform Location Information Include a dimensioned photo or dimensioned drawing of main and auxiliary antenna placements. AUX ANTENNA XX.0 mm XX.0 mm MAIN ANTENNA XX.0 mm XX.0 mm XX.0 mm Regulatory WLAN Antenna Information 9/9 Doc.No.:9.27.05 Rev 0.0 Section 6. Antenna dimensional information for SAR evaluation Include a dimensioned photo or dimensioned drawing showing the distance (mm) between the transmit (main) antenna and the user (excluding hands, wrist, feet, and ankle) MAIN ANTENNA XX.0 mm XX.0 mm XX.0 mm Regulatory WLAN Antenna Information 10/10 Doc.No.:9.27.05 Rev 0.0 Section 7. Diagram Example of Co-Location Antenna Separation Include a dimensioned photo or dimensioned drawing showing the distance (mm) between WLAN antenna and 2nd radiator transmit antenna.
(Note: Due to the evolving rules regarding co-location, each platform will need to be reviewed on a case by case basis) XX.0 mm XX.0 mm XX.0 mm XX.0 mm OTHER ANTENNA
(BLUETOOTH) XX.0 mm OTHER MODULE
(BLUETOOTH) XX.0 mm WLAN MODULE XX.0 mm XX.0 mm XX.0 mm Regulatory WLAN Antenna Information 11/11 Doc.No.:9.27.05 Rev 0.0 Section 8. Local representative contact information Local representative contact information is required for regulatory support for target countries below. Local company name Contact name Phone number FAX Number e-Mail Address Notes Argentina Brazil Indonesia Israel Malaysia Mexico Singapore USA, Canada Telecommunication Equipment Dealer License Required Regulatory WLAN Antenna Information 12/12
1 2 3 | Class II change letter | Cover Letter(s) | 110.08 KiB | July 25 2006 |
416 Maetan-Dong, Young-Tong-Gu, Suwon City, Gyungki-Do, 443-742 Korea Date: July 19,2006 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Attn: OET Dept. Ref: FCC Class II Permissive change for FCC ID: A3L-NP-Q1
(Original Grant date: 03/28/2006 ) Applicant: SAMSUNG ELECTRONICS CO., LTD. Dear Examiner, This is to request a Class II permissive change for FCC ID: A3L-NP-Q1, originally granted on 03/28/2006. The major change filed under this application is:
Change #1 Adding another shape KAE antenna If you have any questions regarding this application, please feel free to contact me. Sincerely yours, Sincerely Yours, John SC Lee/Manager and Chief Engineer Samsung Electronics/PC R&D Division
1 2 3 | Power of Attorney Letter | Cover Letter(s) | 101.59 KiB | July 25 2006 |
416 Maetan-Dong, Young-Tong-Gu, Suwon City, Gyungki-Do, 443-742 Korea Date: March 1, 2006 Compliance Certification Services Certification Division 561F Monterey Road Morgan Hill, CA 95037 To whom it may concern:
We, the undersigned, hereby authorize the Testing Division of Compliance Engineering Services, Inc., d.b.a. Compliance Certification Services and hereafter referred to as CCS, to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by CCS on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). In authorizing CCS Testing Division as our agent, we still recognize that we are responsible to:
a) comply with the relevant provisions of the certification program;
b) c) d) e) make all necessary arrangements for the conduct of the evaluation, including provision for examining documentation and access to all areas, records (including internal audit reports) and personnel for the purposes of evaluation (e.g. testing, inspection, assessment, surveillance, reassessment) and resolution of complaints;
make claims regarding certification only in respect of the scope for which certification has been granted;
do not use our product certification in such a manner as to bring the Certification Division into disrepute and not make any statement regarding our product certification which the Certification Division may consider misleading or unauthorized;
upon suspension or cancellation of certification, discontinue use of all advertising matter that contains any reference thereto and return any certification documents as required by the Certification Division;
f) g) h) i) j) use certification only to indicate the products are certified as being in conformity with specified standards;
endeavor to ensure that no certificate or report nor any part thereof is used in a misleading manner;
ensure that any reference to our product certification in communication media such as documents, brochures or advertising, complies with the requirements of the Certification Division;
keep a record of all complaints made known to the us relating to the products compliance with requirements of the relevant standard and to make these records available to the Certification Division when requested;
take appropriate action with respect to such complaints and any deficiencies found in products or services that affect compliance with the requirements for certification;
k) document the actions taken. This authorization is valid until further written notice from the applicant. Sincerely Yours, John SC Lee/Manager and Chief Engineer Samsung Electronics/PC R&D Division REMARK:
1. This authorization letter will be sent along with your application when filing with the Certification Division. Please follow the format and type it on company letterhead and send original to us. 2.
1 2 3 | TCB Q and A | Cover Letter(s) | 62.44 KiB | July 25 2006 |
Helen Zhao Subject:
FW: answer: SAMSUNG ELECTRONICS CO., LTD., FCC ID: A3L-NP-Q1, Assessment NO.:
AN06T5996, Notice#1 06I10409-1B FCC DTS Report.pd... Hi Helen, Pls see answer below, thanks.
-----Original Message-----
Sent: Monday, July 24, 2006 3:21 PM Subject: SAMSUNG ELECTRONICS CO., LTD., FCC ID: A3L-NP-Q1, Assessment NO.: AN06T5996, Notice#1 Question #1: This is a Class II permissive change filing. In the cover letter, it says "Adding another shape KAE antenna". But the SAR report does not mention this, it shows test data with two antennas: KAE, and Foxconn which was already covered in the original filing. Please explain why the device with Foxconn antenna needs to be retested, what kind of change(s) have been made.
<answer> There are no changes to the Foxconn antenna. However, a preliminary test was made to determine which antenna (KAE or Foxconn) produces the highest SAR. In the original test, an preliminary test was used to determine which antenna (KAE or Foxconn)produces worse SAR. Best Regards, Helen Zhao The items indicated above must be submitted before processing can continue on the above referenced application. Failure to provide the requested information within 30 days of the original e-mail date may result in application dismissal and forfeiture of the filing fee. Also, please note that partial responses increase processing time and should not be submitted. Any questions about the content of this correspondence should be directed to the e-mail address listed below the name of the sender. 1
1 2 3 | Antenna Foxconn | Parts List/Tune Up Info | 459.43 KiB | March 28 2006 |
Santafe Regulatory WLAN Antenna Information
(English Language Required for Intel Regulatory Review / Approval) Samsung Santafe Foxconn Brand Name Model Name Antenna Vendor Antenna Part Number Main Antenna: WDAN-S1SAT001-DF With WLAN Module WM3B2100
(Check Box) WM3B2200BG WM3B2915ABG WM3945ABG Doc.No.:3.8.05 Rev 6.0 Regulatory WLAN Antenna Information 1/1 Doc.No.:3.8.05 Rev 6.0 Antenna Sample / Antenna Data Requirements for worldwide regulatory approval n o i t c e S Description of Required OEM / ODM Antenna Information 1A Part Number for Antenna only 1B Antenna Manufacturer Name 1C Description of Antenna Type Part number of Antenna Assembly / cable impedance, length & diameter. 1D 1E Main & Aux antenna (Peak Gain W/ cable loss) 1E OR 1F, 1G, 1H 1F Main & Aux antenna (Peak Gain only) 1G VSWR of cable including connector 1H Main & Aux antenna (Cable loss W/ connector) Dimensioned Photographs and Drawings of main &
auxiliary antennas Radiation patterns of antennas loaded in the host platform. Platform model name / number - correlated to antenna manufacturer and antenna part number Photograph(s) or Drawings showing location of antennas in platform. (S. Korea requires photographs of antennas for approval submission). Taiwan requires pictures of each antenna type shown in the system. Mech. drawings / photos with dimensions of antenna locations and distance from end-user (For evaluation of SAR testing requirement). Photograph(s) or Drawings showing the location of all antennas (WLAN, BT, other) and distance between those transmitting antennas. Information will be used to evaluate whether co-location testing is required. 2 3 4 5 6 7 8 EU Japan Taiwan US / IC Required Required Required Required Required Required Required Required Required N/A N/A N/A Required Desired Required Required Required Required Desired Desired Required Required Required Required Required Required Required Required Required Required Required Required S.Korea Required Required N/A Desired Required Required Required Required Required Required Required Required Required Required Desired Required N/A Required Required Required Desired Required Desired Required Required Desired Required
(Photos) Required
(Photos) Required N/A N/A N/A N/A Local representative contact information for LMA/
PARS process. Required N/A N/A N/A Required N/A N/A N/A N/A N/A Regulatory WLAN Antenna Information 2/2 Doc.No.:3.8.05 Rev 6.0 Antenna Information Section 1. Antenna Assembly Specifications Antenna Assembly Summary:
1A Antenna Part Number 1B Manufacture 1C Antenna Type
(P/N:
WDAN-S1SAT0 01-DF) Main antenna PIFA HON HAI PRECISION IND. CO.,LTD 1D Cable Assembly Part Number and Information 1.Cable P/N:
FOXCONN:
703-3009-215 2.Cable type: 30 AWG O,D. 1.37 mm 50 ohm coaxial cable 3.Cable length: 182mm 4. Connector P/N:
IPEX: 073-0001-899
(P/N:) 1E
*Peak Gain W/
Cable loss
(dBi) 2400-2500MHz 1.67 dBi (peak) 5150-5350MHz 3.43 dBi (peak) 5470-5725MHz 3.61 dBi (peak) 5725-5850MHz 3.30 dBi (peak) 2400-2500MHz 1F Peak Gain w/o Cable Loss
(dBi) 2400-2500MHz 2.109 dBi (peak) 5150-5350MHz 4.103 dBi (peak) 5470-5725MHz 4.301 dBi (peak) 5725-5850MHz 4.019 dBi (peak) 2400-2500MHz 5150-5350MHz 5150-5350MHz 5470-5725MHz 5470-5725MHz 1G VSWR 2400-2500MHz 2.0 max 5150-5350MHz 2.0 max 5470-5725MHz 2.0 max 5725-5850MHz 2.0 max 2400-2500MHz 2.0 max 5150-5350MHz 2.0 max 5470-5725MHz 2.0 max 2.0 max 1H Cable Loss
(dBi) 2400-2500MHz
-0.439 dBi (peak) 5150-5350MHz
-0.673 dBi (peak) 5470-5725MHz
-0.691 dBi (peak) 5725-5850MHz
-0.719 dBi (peak) 2400-2500MHz 5150-5350MHz 5470-5725MHz 5725-5850MHz 5725-5850MHz 5725-5850MHz 5725-5850MHz Antenna Peak Gain Table:
Frequency (MHz) 2400 2442 2484 5150 5250 5350 5470 5600 5725 5800 5850 Horizontal
(dBi) 0.43 0.29
-1.01
-1.68
-2.23 0.31 0.98
-0.97
-0.83
-0.81 0.06 Main antenna Vertical
(dBi)
-0.84
-0.35
-1.09 1.84 2.75 2.85 2.87 3.00 2.22 1.89 1.94 Hori+Ver
(dBi) 1.67 1.66 1.05 2.81 3.03 3.43 3.61 3.52 3.21 2.93 3.30
Antenna Peak Gain required being test in system basis.
1E frame contend absolutely peak antenna gain include H/ V/ H+V. Regulatory WLAN Antenna Information 3/3 Doc.No.:3.8.05 Rev 6.0 Section 2. Dimensioned Photos or Drawings of Antennas Include a dimensioned photo and dimensioned drawing of main antenna here. Main Antenna Dimensioned Drawing:
Main Antenna Photo:
Regulatory WLAN Antenna Information 4/4 Doc.No.:3.8.05 Rev 6.0 Section 3. Radiation characteristics of antennae Loaded in Host Platform 2400-2500MHz radiation characteristic Main antenna: 2400 MHz Center Frequency Horizontal (dBi) peak Vertical (dBi) peak Horz+Vert (dBi) peak 2400 MHz 0.43
-0.84 1.67 Regulatory WLAN Antenna Information 5/5 Doc.No.:3.8.05 Rev 6.0 Main antenna: 2442 MHz Center Frequency Horizontal (dBi) peak Vertical (dBi) peak Horz+Vert (dBi) peak 2442 MHz 0.29
-0.35 1.66 Regulatory WLAN Antenna Information 6/6 Doc.No.:3.8.05 Rev 6.0 Main antenna: 2484 MHz Center Frequency Horizontal (dBi) peak Vertical (dBi) peak Horz+Vert (dBi) peak 2484 MHz
-1.01
-1.09 1.05 Regulatory WLAN Antenna Information 7/7 Doc.No.:3.8.05 Rev 6.0 5150-5350 MHz radiation characteristic Main antenna: 5150 MHz Center Frequency Horizontal (dBi) peak Vertical (dBi) peak Horz+Vert (dBi) peak 5150 MHz
-1.68 1.84 2.81 Regulatory WLAN Antenna Information 8/8 Doc.No.:3.8.05 Rev 6.0 Main antenna: 5250 MHz Center Frequency Horizontal (dBi) peak Vertical (dBi) peak Horz+Vert (dBi) peak 5250 MHz
-2.23 2.75 3.03 Regulatory WLAN Antenna Information 9/9 Doc.No.:3.8.05 Rev 6.0 Main antenna: 5350 MHz Center Frequency Horizontal (dBi) peak Vertical (dBi) peak Horz+Vert (dBi) peak 5350 MHz 0.31 2.85 3.43 Regulatory WLAN Antenna Information 10/10 Doc.No.:3.8.05 Rev 6.0 5470-5725MHz radiation characteristic Main antenna: 5470 MHz Center Frequency Horizontal (dBi) peak Vertical (dBi) peak Horz+Vert (dBi) peak 5470 MHz 0.98 2.87 3.61 Regulatory WLAN Antenna Information 11/11 Doc.No.:3.8.05 Rev 6.0 Main antenna: 5600 MHz Center Frequency Horizontal (dBi) peak Vertical (dBi) peak Horz+Vert (dBi) peak 5600 MHz
-0.97 3.00 3.52 Regulatory WLAN Antenna Information 12/12 Doc.No.:3.8.05 Rev 6.0 Main antenna: 5725 MHz Center Frequency Horizontal (dBi) peak Vertical (dBi) peak Horz+Vert (dBi) peak 5725 MHz
-0.83 2.22 3.21 Regulatory WLAN Antenna Information 13/13 Doc.No.:3.8.05 Rev 6.0 5725-5850 MHz radiation characteristic Main antenna: 5750 MHz Center Frequency Horizontal (dBi) peak Vertical (dBi) peak Horz+Vert (dBi) peak 5750 MHz
-0.81 1.89 2.93 Regulatory WLAN Antenna Information 14/14 Doc.No.:3.8.05 Rev 6.0 Main antenna: 5800 MHz Center Frequency Horizontal (dBi) peak Vertical (dBi) peak Horz+Vert (dBi) peak 5800 MHz 0.06 1.94 3.30 Regulatory WLAN Antenna Information 15/15 Doc.No.:3.8.05 Rev 6.0 Main antenna: 5850 MHz Center Frequency Horizontal (dBi) peak Vertical (dBi) peak Horz+Vert (dBi) peak 5850 MHz
-0.63 1.85 2.98 Regulatory WLAN Antenna Information 16/16 Doc.No.:3.8.05 Rev 6.0 Section 4. Host Platform Information OEM / ODM Host platform: (XXXXXXX) platform correlated to antenna data Rating Label Photo:
Module Location Photo: (if Singapore required) Regulatory WLAN Antenna Information 17/17 Doc.No.:3.8.05 Rev 6.0 Section 5. Antenna Host Platform Location Information Include a dimensioned photo or dimensioned drawing of main and auxiliary antenna placements. AUX ANTENNA XX.0 mm XX.0 mm MAIN ANTENNA XX.0 mm XX.0 mm XX.0 mm Regulatory WLAN Antenna Information 18/18 Doc.No.:3.8.05 Rev 6.0 Section 6. Antenna dimensional information for SAR evaluation Include a dimensioned photo or dimensioned drawing showing the distance (mm) between the transmit (main) antenna and the user (excluding hands, wrist, feet, and ankle) MAIN ANTENNA XX.0 mm XX.0 mm XX.0 mm Regulatory WLAN Antenna Information 19/19 Doc.No.:3.8.05 Rev 6.0 Section 7. Diagram Example of Co-Location Antenna Separation Include a dimensioned photo or dimensioned drawing showing the distance (mm) between WLAN antenna and 2nd radiator transmit antenna.
(Note: Due to the evolving rules regarding co-location, each platform will need to be reviewed on a case by case basis) XX.0 mm XX.0 mm XX.0 mm XX.0 mm OTHER ANTENNA
(BLUETOOTH) XX.0 mm OTHER MODULE
(BLUETOOTH) XX.0 mm WLAN MODULE XX.0 mm XX.0 mm XX.0 mm Regulatory WLAN Antenna Information 20/20 Doc.No.:3.8.05 Rev 6.0 Section 8. Local representative contact information Local representative contact information is required for regulatory support for target countries below. Local company name Contact name Phone number FAX Number e-Mail Address Notes Argentina Brazil Indonesia Israel Malaysia Mexico Singapore USA, Canada Telecommunication Equipment Dealer License Required Regulatory WLAN Antenna Information 21/21
1 2 3 | Antenna KAE | Parts List/Tune Up Info | 1.11 MiB | March 28 2006 |
Regulatory WLAN Antenna Information (SANTAFE)
(English Language Required for Intel Regulatory Review / Approval)
(OEM/ODM or antenna vendor is required to complete this document with platform antenna information. Remove Intel references and make this your own document) SANTAFE Amphenol KAE Brand Name Model Name Antenna Vendor Antenna Part Number Main Antenna: SS-03-03-076 With WLAN Module WM3B2100
(Check Box) Aux Antenna:
WM3B2200BG WM3B2915ABG WM3945ABG Doc.No.:9.27.05 Rev 0.0 Regulatory WLAN Antenna Information 1/1 Doc.No.:9.27.05 Rev 0.0 Antenna Sample / Antenna Data Requirements for worldwide regulatory approval n o i t c e S Description of Required OEM / ODM Antenna Information 1A Part Number for Antenna only 1B Antenna Manufacturer Name 1C Description of Antenna Type Part number of Antenna Assembly / cable impedance, length & diameter. 1D 1E Main & Aux antenna (Peak Gain W/ cable loss) 1E OR 1F, 1G, 1H 1F Main & Aux antenna (Peak Gain only) 1G VSWR of cable including connector 1H Main & Aux antenna (Cable loss W/ connector) Dimensioned Photographs and Drawings of main &
auxiliary antennas Radiation patterns of antennas loaded in the host platform. Platform model name / number - correlated to antenna manufacturer and antenna part number Photograph(s) or Drawings showing location of antennas in platform. (S. Korea requires photographs of antennas for approval submission). Taiwan requires pictures of each antenna type shown in the system. Mech. drawings / photos with dimensions of antenna locations and distance from end-user (For evaluation of SAR testing requirement). Photograph(s) or Drawings showing the location of all antennas (WLAN, BT, other) and distance between those transmitting antennas. Information will be used to evaluate whether co-location testing is required. 2 3 4 5 6 7 8 EU US / IC Japan Taiwan Required Required Required Required Required Required Required Required Required N/A N/A N/A Required Desired Required Required Required Required Desired Desired Required Required Required Required Required Required Required Required Required Required Required Required S.Korea Required Required N/A Desired Required Required Required Required Required Required Required Required Required Required Desired Required N/A Required Required Required Desired Required Desired Required Required Desired Required
(Photos) Required
(Photos) Required N/A N/A N/A N/A Local representative contact information for LMA/
PARS process. Required N/A N/A N/A Required N/A N/A N/A N/A N/A Regulatory WLAN Antenna Information 2/2 Doc.No.:9.27.05 Rev 0.0 Antenna Information Section 1. Antenna Assembly Specifications Antenna Assembly Summary:
1A Antenna Part Number 1B Manufacture 1C Antenna Type
(P/N:
SS-03-03-081) Main antenna Amphenol KAE Co., Ltd PIFA 1D Cable Assembly Part Number and Information
(P/N:
SS-03-03-076) 50 ohm Coaxial. length: 160mm diameter:
1.37mm Connector:
MHC-231(KAE) 1E
*Peak Gain W/
Cable loss (dBi) 2400-2500MHz 1.71 dBi (peak) 5150-5350MHz 1.80 dBi (peak) 5470-5725MHz 4.79 dBi (peak) 5725-5850MHz 4.79 dBi (peak) 1F Peak Gain w/o Cable Loss
(dBi) 2400-2500MHz 2.10 dBi (peak) 5150-5350MHz 2.41 dBi (peak) 5470-5725MHz 5.45 dBi (peak) 5725-5850MHz 5.48 dBi (peak) 1G VSWR 2400-2500MHz 1.07 max 5150-5350MHz 1.19 max 5470-5725MHz 1.27 max 5725-5850MHz 1.16 max 1H Cable Loss
(dBi) 2400-2500MHz 0.39 dBi (peak) 5150-5350MHz 0.61 dBi (peak) 5470-5725MHz 0.65 dBi (peak) 5725-5850MHz 0.69 dBi (peak)
(P/N:
) Auxiliary antenna Antenna Peak Gain Table:
Frequency (MHz) Hori+Ver
(dBi) 1.71 dB 0.83 dB 0.81 dB 1.80 dB 1.72 dB 1.46 dB 1.99 dB 3.57 dB 4.79 dB 3.85 dB Vertical
(dBi)
-1.71 dB
-2.10 dB
-2.20 dB 1.77 dB 1.67 dB 0.63 dB 0.92 dB 1.51 dB 2.85 dB 2.56 dB Horizontal
(dBi) 0.94 dB
-0.37 dB
-1.40 dB
-2.24 dB
-2.15 dB 0.15 dB 0.30 dB 0.50 dB 1.59 dB 1.74 dB 2400 2442 2484 5150 5250 5350 5470 5600 5725 5850
Antenna Peak Gain required being test in system basis.
1E frame contend absolutely peak antenna gain include H/ V/ H+V. Main antenna Aux Antenna Horizontal
(dBi) Vertical
(dBi) Hori+Ver
(dBi) Regulatory WLAN Antenna Information 3/3 Doc.No.:9.27.05 Rev 0.0 Section 2. Dimensioned Photos or Drawings of Antennas Include a dimensioned photo and dimensioned drawing of main antenna here. Main Antenna Dimensioned Drawing:
Regulatory WLAN Antenna Information 4/4 Doc.No.:9.27.05 Rev 0.0 Main Antenna Photo:
Regulatory WLAN Antenna Information 5/5 Doc.No.:9.27.05 Rev 0.0 Section 3. Radiation characteristics of antennae Loaded in Host Platform 1. Main antenna Radiation pattern and gain 1.1 H-Phi(horizontal) 1.2 H-Theta(vertical) Regulatory WLAN Antenna Information 6/6 Doc.No.:9.27.05 Rev 0.0 1.3 H-Phi+ H-Theta 1.4 Peak gain (dBi) summary Frequency (MHz) Horizontal 2400 2442 2484 5150 5250 5350 5470 5600 5725 5850 0.94 dB
-0.37 dB
-1.40 dB
-2.24 dB
-2.15 dB 0.15 dB 0.30 dB 0.50 dB 1.59 dB 1.74 dB Vertical
-1.71 dB
-2.10 dB
-2.20 dB 1.77 dB 1.67 dB 0.63 dB 0.92 dB 1.51 dB 2.85 dB 2.56 dB Hori+Ver 1.71 dB 0.83 dB 0.81 dB 1.80 dB 1.72 dB 1.46 dB 1.99 dB 3.57 dB 4.79 dB 3.85 dB Regulatory WLAN Antenna Information 7/7 Doc.No.:9.27.05 Rev 0.0 Section 4. Host Platform Information OEM / ODM Host platform: (XXXXXXX) platform correlated to antenna data Rating Label Photo:
Module Location Photo: (if Singapore required) Regulatory WLAN Antenna Information 8/8 Doc.No.:9.27.05 Rev 0.0 Section 5. Antenna Host Platform Location Information Include a dimensioned photo or dimensioned drawing of main and auxiliary antenna placements. AUX ANTENNA XX.0 mm XX.0 mm MAIN ANTENNA XX.0 mm XX.0 mm XX.0 mm Regulatory WLAN Antenna Information 9/9 Doc.No.:9.27.05 Rev 0.0 Section 6. Antenna dimensional information for SAR evaluation Include a dimensioned photo or dimensioned drawing showing the distance (mm) between the transmit (main) antenna and the user (excluding hands, wrist, feet, and ankle) MAIN ANTENNA XX.0 mm XX.0 mm XX.0 mm Regulatory WLAN Antenna Information 10/10 Doc.No.:9.27.05 Rev 0.0 Section 7. Diagram Example of Co-Location Antenna Separation Include a dimensioned photo or dimensioned drawing showing the distance (mm) between WLAN antenna and 2nd radiator transmit antenna.
(Note: Due to the evolving rules regarding co-location, each platform will need to be reviewed on a case by case basis) XX.0 mm XX.0 mm XX.0 mm XX.0 mm OTHER ANTENNA
(BLUETOOTH) XX.0 mm OTHER MODULE
(BLUETOOTH) XX.0 mm WLAN MODULE XX.0 mm XX.0 mm XX.0 mm Regulatory WLAN Antenna Information 11/11 Doc.No.:9.27.05 Rev 0.0 Section 8. Local representative contact information Local representative contact information is required for regulatory support for target countries below. Local company name Contact name Phone number FAX Number e-Mail Address Notes Argentina Brazil Indonesia Israel Malaysia Mexico Singapore USA, Canada Telecommunication Equipment Dealer License Required Regulatory WLAN Antenna Information 12/12
1 2 3 | Authorization Letter | Cover Letter(s) | 101.59 KiB | March 28 2006 |
416 Maetan-Dong, Young-Tong-Gu, Suwon City, Gyungki-Do, 443-742 Korea Date: March 1, 2006 Compliance Certification Services Certification Division 561F Monterey Road Morgan Hill, CA 95037 To whom it may concern:
We, the undersigned, hereby authorize the Testing Division of Compliance Engineering Services, Inc., d.b.a. Compliance Certification Services and hereafter referred to as CCS, to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by CCS on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). In authorizing CCS Testing Division as our agent, we still recognize that we are responsible to:
a) comply with the relevant provisions of the certification program;
b) c) d) e) make all necessary arrangements for the conduct of the evaluation, including provision for examining documentation and access to all areas, records (including internal audit reports) and personnel for the purposes of evaluation (e.g. testing, inspection, assessment, surveillance, reassessment) and resolution of complaints;
make claims regarding certification only in respect of the scope for which certification has been granted;
do not use our product certification in such a manner as to bring the Certification Division into disrepute and not make any statement regarding our product certification which the Certification Division may consider misleading or unauthorized;
upon suspension or cancellation of certification, discontinue use of all advertising matter that contains any reference thereto and return any certification documents as required by the Certification Division;
f) g) h) i) j) use certification only to indicate the products are certified as being in conformity with specified standards;
endeavor to ensure that no certificate or report nor any part thereof is used in a misleading manner;
ensure that any reference to our product certification in communication media such as documents, brochures or advertising, complies with the requirements of the Certification Division;
keep a record of all complaints made known to the us relating to the products compliance with requirements of the relevant standard and to make these records available to the Certification Division when requested;
take appropriate action with respect to such complaints and any deficiencies found in products or services that affect compliance with the requirements for certification;
k) document the actions taken. This authorization is valid until further written notice from the applicant. Sincerely Yours, John SC Lee/Manager and Chief Engineer Samsung Electronics/PC R&D Division REMARK:
1. This authorization letter will be sent along with your application when filing with the Certification Division. Please follow the format and type it on company letterhead and send original to us. 2.
1 2 3 | Request for Confidentiality | Cover Letter(s) | 69.80 KiB | March 28 2006 |
416 Maetan-Dong, Young-Tong-Gu, Suwon City, Gyungki-Do, 443-742 Korea Date: March 1, 2006 Federal Communications Commission Equipment Authorization branch 7435 Oakland Mills Road Columbia, MD 21046 Re: Request for Confidentiality Gentlemen:
In reference to the application under FCC ID: A3L-NP-Q1, and pursuant to Sections 0.457(d)(l)(ii) and 0.459 of the Commissions Rules, the Applicant hereby requests confidential treatment of the accompanying information as outlined below:
Schematics Block Diagrams Theory of Operation . These documents contain detailed system and equipment description and related information about the product that Samsung and Atheros considers to be proprietary, confidential, and a custom design and, otherwise, would not release to the general public. Since this design is a basis from which future technological products will evolve, Samsung and Atheros considers that this information would be of benefit to its competitors, and that disclosure of the information in these documents would give competitors an unfair advantage in the market. Sincerely, John SC Lee/Manager and Chief Engineer Samsung Electronics/PC R&D Division
1 2 3 | Antennan Foxconn | Parts List/Tune Up Info | 459.42 KiB | March 28 2006 |
Santafe Regulatory WLAN Antenna Information
(English Language Required for Intel Regulatory Review / Approval) Samsung Santafe Foxconn Brand Name Model Name Antenna Vendor Antenna Part Number Main Antenna: WDAN-S1SAT001-DF With WLAN Module WM3B2100
(Check Box) WM3B2200BG WM3B2915ABG WM3945ABG Doc.No.:3.8.05 Rev 6.0 Regulatory WLAN Antenna Information 1/1 Doc.No.:3.8.05 Rev 6.0 Antenna Sample / Antenna Data Requirements for worldwide regulatory approval n o i t c e S Description of Required OEM / ODM Antenna Information 1A Part Number for Antenna only 1B Antenna Manufacturer Name 1C Description of Antenna Type Part number of Antenna Assembly / cable impedance, length & diameter. 1D 1E Main & Aux antenna (Peak Gain W/ cable loss) 1E OR 1F, 1G, 1H 1F Main & Aux antenna (Peak Gain only) 1G VSWR of cable including connector 1H Main & Aux antenna (Cable loss W/ connector) Dimensioned Photographs and Drawings of main &
auxiliary antennas Radiation patterns of antennas loaded in the host platform. Platform model name / number - correlated to antenna manufacturer and antenna part number Photograph(s) or Drawings showing location of antennas in platform. (S. Korea requires photographs of antennas for approval submission). Taiwan requires pictures of each antenna type shown in the system. Mech. drawings / photos with dimensions of antenna locations and distance from end-user (For evaluation of SAR testing requirement). Photograph(s) or Drawings showing the location of all antennas (WLAN, BT, other) and distance between those transmitting antennas. Information will be used to evaluate whether co-location testing is required. 2 3 4 5 6 7 8 EU Japan Taiwan US / IC Required Required Required Required Required Required Required Required Required N/A N/A N/A Required Desired Required Required Required Required Desired Desired Required Required Required Required Required Required Required Required Required Required Required Required S.Korea Required Required N/A Desired Required Required Required Required Required Required Required Required Required Required Desired Required N/A Required Required Required Desired Required Desired Required Required Desired Required
(Photos) Required
(Photos) Required N/A N/A N/A N/A Local representative contact information for LMA/
PARS process. Required N/A N/A N/A Required N/A N/A N/A N/A N/A Regulatory WLAN Antenna Information 2/2 Doc.No.:3.8.05 Rev 6.0 Antenna Information Section 1. Antenna Assembly Specifications Antenna Assembly Summary:
1A Antenna Part Number 1B Manufacture 1C Antenna Type
(P/N:
WDAN-S1SAT0 01-DF) Main antenna PIFA HON HAI PRECISION IND. CO.,LTD 1D Cable Assembly Part Number and Information 1.Cable P/N:
FOXCONN:
703-3009-215 2.Cable type: 30 AWG O,D. 1.37 mm 50 ohm coaxial cable 3.Cable length: 182mm 4. Connector P/N:
IPEX: 073-0001-899
(P/N:) 1E
*Peak Gain W/
Cable loss
(dBi) 2400-2500MHz 1.67 dBi (peak) 5150-5350MHz 3.43 dBi (peak) 5470-5725MHz 3.61 dBi (peak) 5725-5850MHz 3.30 dBi (peak) 2400-2500MHz 1F Peak Gain w/o Cable Loss
(dBi) 2400-2500MHz 4.532 dBi (peak) 5150-5350MHz 6.758 dBi (peak) 5470-5725MHz 6.512 dBi (peak) 5725-5850MHz 6.867 dBi (peak) 2400-2500MHz 5150-5350MHz 5150-5350MHz 5470-5725MHz 5470-5725MHz 1G VSWR 2400-2500MHz 2.0 max 5150-5350MHz 2.0 max 5470-5725MHz 2.0 max 5725-5850MHz 2.0 max 2400-2500MHz 2.0 max 5150-5350MHz 2.0 max 5470-5725MHz 2.0 max 2.0 max 1H Cable Loss
(dBi) 2400-2500MHz
-0.439 dBi (peak) 5150-5350MHz
-0.673 dBi (peak) 5470-5725MHz
-0.691 dBi (peak) 5725-5850MHz
-0.719 dBi (peak) 2400-2500MHz 5150-5350MHz 5470-5725MHz 5725-5850MHz 5725-5850MHz 5725-5850MHz 5725-5850MHz Antenna Peak Gain Table:
Frequency (MHz) 2400 2442 2484 5150 5250 5350 5470 5600 5725 5800 5850 Horizontal
(dBi) 0.43 0.29
-1.01
-1.68
-2.23 0.31 0.98
-0.97
-0.83
-0.81 0.06 Main antenna Vertical
(dBi)
-0.84
-0.35
-1.09 1.84 2.75 2.85 2.87 3.00 2.22 1.89 1.94 Hori+Ver
(dBi) 1.67 1.66 1.05 2.81 3.03 3.43 3.61 3.52 3.21 2.93 3.30
Antenna Peak Gain required being test in system basis.
1E frame contend absolutely peak antenna gain include H/ V/ H+V. Regulatory WLAN Antenna Information 3/3 Doc.No.:3.8.05 Rev 6.0 Section 2. Dimensioned Photos or Drawings of Antennas Include a dimensioned photo and dimensioned drawing of main antenna here. Main Antenna Dimensioned Drawing:
Main Antenna Photo:
Regulatory WLAN Antenna Information 4/4 Doc.No.:3.8.05 Rev 6.0 Section 3. Radiation characteristics of antennae Loaded in Host Platform 2400-2500MHz radiation characteristic Main antenna: 2400 MHz Center Frequency Horizontal (dBi) peak Vertical (dBi) peak Horz+Vert (dBi) peak 2400 MHz 0.43
-0.84 1.67 Regulatory WLAN Antenna Information 5/5 Doc.No.:3.8.05 Rev 6.0 Main antenna: 2442 MHz Center Frequency Horizontal (dBi) peak Vertical (dBi) peak Horz+Vert (dBi) peak 2442 MHz 0.29
-0.35 1.66 Regulatory WLAN Antenna Information 6/6 Doc.No.:3.8.05 Rev 6.0 Main antenna: 2484 MHz Center Frequency Horizontal (dBi) peak Vertical (dBi) peak Horz+Vert (dBi) peak 2484 MHz
-1.01
-1.09 1.05 Regulatory WLAN Antenna Information 7/7 Doc.No.:3.8.05 Rev 6.0 5150-5350 MHz radiation characteristic Main antenna: 5150 MHz Center Frequency Horizontal (dBi) peak Vertical (dBi) peak Horz+Vert (dBi) peak 5150 MHz
-1.68 1.84 2.81 Regulatory WLAN Antenna Information 8/8 Doc.No.:3.8.05 Rev 6.0 Main antenna: 5250 MHz Center Frequency Horizontal (dBi) peak Vertical (dBi) peak Horz+Vert (dBi) peak 5250 MHz
-2.23 2.75 3.03 Regulatory WLAN Antenna Information 9/9 Doc.No.:3.8.05 Rev 6.0 Main antenna: 5350 MHz Center Frequency Horizontal (dBi) peak Vertical (dBi) peak Horz+Vert (dBi) peak 5350 MHz 0.31 2.85 3.43 Regulatory WLAN Antenna Information 10/10 Doc.No.:3.8.05 Rev 6.0 5470-5725MHz radiation characteristic Main antenna: 5470 MHz Center Frequency Horizontal (dBi) peak Vertical (dBi) peak Horz+Vert (dBi) peak 5470 MHz 0.98 2.87 3.61 Regulatory WLAN Antenna Information 11/11 Doc.No.:3.8.05 Rev 6.0 Main antenna: 5600 MHz Center Frequency Horizontal (dBi) peak Vertical (dBi) peak Horz+Vert (dBi) peak 5600 MHz
-0.97 3.00 3.52 Regulatory WLAN Antenna Information 12/12 Doc.No.:3.8.05 Rev 6.0 Main antenna: 5725 MHz Center Frequency Horizontal (dBi) peak Vertical (dBi) peak Horz+Vert (dBi) peak 5725 MHz
-0.83 2.22 3.21 Regulatory WLAN Antenna Information 13/13 Doc.No.:3.8.05 Rev 6.0 5725-5850 MHz radiation characteristic Main antenna: 5750 MHz Center Frequency Horizontal (dBi) peak Vertical (dBi) peak Horz+Vert (dBi) peak 5750 MHz
-0.81 1.89 2.93 Regulatory WLAN Antenna Information 14/14 Doc.No.:3.8.05 Rev 6.0 Main antenna: 5800 MHz Center Frequency Horizontal (dBi) peak Vertical (dBi) peak Horz+Vert (dBi) peak 5800 MHz 0.06 1.94 3.30 Regulatory WLAN Antenna Information 15/15 Doc.No.:3.8.05 Rev 6.0 Main antenna: 5850 MHz Center Frequency Horizontal (dBi) peak Vertical (dBi) peak Horz+Vert (dBi) peak 5850 MHz
-0.63 1.85 2.98 Regulatory WLAN Antenna Information 16/16 Doc.No.:3.8.05 Rev 6.0 Section 4. Host Platform Information OEM / ODM Host platform: (XXXXXXX) platform correlated to antenna data Rating Label Photo:
Module Location Photo: (if Singapore required) Regulatory WLAN Antenna Information 17/17 Doc.No.:3.8.05 Rev 6.0 Section 5. Antenna Host Platform Location Information Include a dimensioned photo or dimensioned drawing of main and auxiliary antenna placements. AUX ANTENNA XX.0 mm XX.0 mm MAIN ANTENNA XX.0 mm XX.0 mm XX.0 mm Regulatory WLAN Antenna Information 18/18 Doc.No.:3.8.05 Rev 6.0 Section 6. Antenna dimensional information for SAR evaluation Include a dimensioned photo or dimensioned drawing showing the distance (mm) between the transmit (main) antenna and the user (excluding hands, wrist, feet, and ankle) MAIN ANTENNA XX.0 mm XX.0 mm XX.0 mm Regulatory WLAN Antenna Information 19/19 Doc.No.:3.8.05 Rev 6.0 Section 7. Diagram Example of Co-Location Antenna Separation Include a dimensioned photo or dimensioned drawing showing the distance (mm) between WLAN antenna and 2nd radiator transmit antenna.
(Note: Due to the evolving rules regarding co-location, each platform will need to be reviewed on a case by case basis) XX.0 mm XX.0 mm XX.0 mm XX.0 mm OTHER ANTENNA
(BLUETOOTH) XX.0 mm OTHER MODULE
(BLUETOOTH) XX.0 mm WLAN MODULE XX.0 mm XX.0 mm XX.0 mm Regulatory WLAN Antenna Information 20/20 Doc.No.:3.8.05 Rev 6.0 Section 8. Local representative contact information Local representative contact information is required for regulatory support for target countries below. Local company name Contact name Phone number FAX Number e-Mail Address Notes Argentina Brazil Indonesia Israel Malaysia Mexico Singapore USA, Canada Telecommunication Equipment Dealer License Required Regulatory WLAN Antenna Information 21/21
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2006-07-25 | 2412 ~ 2462 | DTS - Digital Transmission System | Class II permissive change or modification of presently authorized equipment |
2 | 2006-03-28 | 2412 ~ 2462 | DTS - Digital Transmission System | Original Equipment |
3 | JBC - Part 15 Class B Computing Device/Personal Computer |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 2 3 | Effective |
2006-07-25
|
||||
1 2 3 |
2006-03-28
|
|||||
1 2 3 | Applicant's complete, legal business name |
Samsung Electronics Co Ltd
|
||||
1 2 3 | FCC Registration Number (FRN) |
0027908797
|
||||
1 2 3 | Physical Address |
19 Chapin Rd., Building D
|
||||
1 2 3 |
Pine Brook, 07058
|
|||||
1 2 3 |
Pine Brook, New Jersey 07058
|
|||||
1 2 3 |
United States
|
|||||
app s | TCB Information | |||||
1 2 3 | TCB Application Email Address |
m******@ccsemc.com
|
||||
1 2 3 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
1 2 3 |
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
|||||
app s | FCC ID | |||||
1 2 3 | Grantee Code |
A3L
|
||||
1 2 3 | Equipment Product Code |
NP-Q1
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 2 3 | Name |
J****** C******
|
||||
1 2 3 | Title |
General Manager
|
||||
1 2 3 | Telephone Number |
973-8********
|
||||
1 2 3 | Fax Number |
973-8********
|
||||
1 2 3 |
j******@samsung.com
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 2 3 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
1 2 3 | Yes | |||||
1 2 3 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 2 3 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 2 3 | Equipment Class | DTS - Digital Transmission System | ||||
1 2 3 | JBC - Part 15 Class B Computing Device/Personal Computer | |||||
1 2 3 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Notebook PC | ||||
1 2 3 | Mobile PC | |||||
1 2 3 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 2 3 | Modular Equipment Type | Does not apply | ||||
1 2 3 | Purpose / Application is for | Class II permissive change or modification of presently authorized equipment | ||||
1 2 3 | Original Equipment | |||||
1 2 3 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | Yes | ||||
1 2 3 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 2 3 | Grant Comments | Class II permissive change filing. Power Output listed is conducted. Co-located optional Bluetooth transmitter (FCC ID: QDS-BRCM1018) operating conditions have been evaluated as described in filings under this FCC ID - separate equipment certification is needed for other co-location configurations and RF exposure conditions. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. The highest reported SAR value is 1.53 W/kg. | ||||
1 2 3 | Power Output listed is conducted. Co-located optional Bluetooth transmitter (FCC ID: QDS-BRCM1018) operating conditions have been evaluated as described in this filing - separate equipment certification is needed for other co-location configurations and RF exposure conditions. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. The highest reported SAR value is 1.50 W/kg. | |||||
1 2 3 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 2 3 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 2 3 | Firm Name |
Compliance Certification Services
|
||||
1 2 3 |
Compliance Certification Services Inc
|
|||||
1 2 3 | Name |
B******** J******
|
||||
1 2 3 |
S**** C********
|
|||||
1 2 3 | Telephone Number |
510-7******** Extension:
|
||||
1 2 3 |
408-4******** Extension:
|
|||||
1 2 3 | Fax Number |
510-6********
|
||||
1 2 3 |
408-4********
|
|||||
1 2 3 |
b******@ccsemc.com
|
|||||
1 2 3 |
s******@ccsemc.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | CC | 2412.00000000 | 2462.00000000 | 0.2510000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
2 | 1 | 15C | CC | 2412.00000000 | 2462.00000000 | 0.2510000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
3 | 1 | 15B | CC |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC