's M
S978L Draft Manual: The Manual is preliminary and some features discussed may not be applicable or complete and are not final. (i.e. Items such as battery, SIM Card, .etc)
Health and safety information Exposure to Radio Frequency (RF) Signals Certification Information (SAR) Your wireless phone is a radio transmitter and receiver. It is designed and manufactured not to exceed the exposure limits for radio frequency (RF) energy set by the Federal Communications Commission (FCC) of the U.S. government. These FCC exposure limits are derived from the recommendations of two expert organizations, the National Counsel on Radiation Protection and Measurement
(NCRP) and the Institute of Electrical and Electronics Engineers (IEEE). In both cases, the recommendations were developed by scientific and engineering experts drawn from industry, government, and academia after extensive reviews of the scientific literature related to the biological effects of RF energy. The exposure limit set by the FCC for wireless mobile phones employs a unit of measurement known as the Specific Absorption Rate (SAR). The SAR is a measure of the rate of absorption of RF energy by the human body expressed in units of watts per kilogram (W/kg). The FCC requires wireless phones to comply with a safety limit of 1.6 watts per kilogram (1.6 W/ kg). The FCC exposure limit incorporates a substantial margin of safety to give additional protection to the public and to account for any variations in measurements. SAR tests are conducted using standard operating positions accepted by the FCC with the phone transmitting at its highest certified power level in all tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR level of the phone while operating can be well below the maximum value. This is because the phone is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output. Before a new model phone is available for sale to the public, it must be tested and certified to the FCC that it does not exceed the exposure limit established by the FCC. Tests for each model phone are performed in positions and locations (e.g. at the ear and worn on the body) as required by the FCC. For body worn operation, this model phone has been tested and meets the FCC RF exposure guidelines when used with a Samsung accessory designated for this product or when used with an accessory that contains no metal and that positions the handset a minimum of 1.5 cm from the body. Non-compliance with the above restrictions may result in violation of FCC RF exposure guidelines. SAR information on this and other model phones can be viewed on-line at http://www.fcc.gov/oet/ea/fccid/. Please use the phone FCC ID number for search, A3LSMS978L. Sometimes it may be necessary to remove the battery pack to find the number. Once you have the FCC ID number for a particular phone, follow the instructions on the website and it should provide values for typical or maximum SAR for a particular phone. Additional product specific SAR information can also be obtained at http://www.fcc.gov/encyclopedia/specific-absorption-rate-sar-cellular-telephones Consumer Information on Wireless Phones
What kinds of phones are the subject of this update?
Do wireless phones pose a health hazard?
What is FDA's role concerning the safety of wireless phones?
What are the results of the research done already?
What research is needed to decide whether RF exposure from wireless phones poses a health risk?
What is FDA doing to find out more about the possible health effects of wireless phone RF?
What steps can I take to reduce my exposure to radio frequency energy from my wireless phone?
What about children using wireless phones?
Do hands-free kits for wireless phones reduce risks from exposure to RF emissions?
Do wireless phone accessories that claim to shield the head from RF radiation work?
What about wireless phone interference with medical equipment?
Road Safety
The wireless industry reminds you to use your phone safely when driving. For more information, please call 1-888-901-SAFE, or visit our web-site www.wow-com.com Provided by the Cellular Telecommunications & Internet Association Operating Environment
Using Your Phone Near Other Electronic Devices
Pacemakers
Persons with pacemakers:
Hearing Aids
Other Medical Devices
Vehicles
Posted Facilities
Potentially Explosive Environments
Emergency Calls
Restricting Children's access to your Phone
FCC Notice and Cautions FCC Notice
Cautions
Other Important Safety Information
Product Performance Getting the Most Out of Your Signal Reception
Understanding the Power Save Feature
Maintaining Your Phone's Peak Performance
Availability of Various Features/Ring Tones
Battery Standby and Talk Time
Battery Precautions
Care and Maintenance
About the low battery indicator
power button 1.
Mode
Function
Connectivity Bluetooth
Turn on the Bluetooth wireless feature
Settings Connectivity Bluetooth
Bluetooth 3
Settings Connectivity Bluetooth
Bluetooth
Custom Done
Settings My phones name
Settings Secure
mode
Bluetooth services
Find and pair with other Bluetooth-enabled devices
Settings Connectivity Bluetooth
Search
DoneYes
Browse files
Service list
Rename
Authorise device
Send data using the Bluetooth wireless feature
Send My files
Delete
My files
3
Receive data using the Bluetooth wireless feature
OK
Yes
Use Remote SIM mode
Settings Connectivity Bluetooth
Settings Remote SIM mode
Wi-Fi
b/g/n
Activate the WLAN feature
Settings Connectivity Wi-Fi
Deactivate the WLAN feature
Settings Connectivity Wi-Fi
Find and connect to a WLAN 1 Settings Connectivity Wi-Fi
2
3 Done
Customise the connection profile 1 Settings Connectivity Wi-Fi2
3
Forget
Connect to a WLAN using a Wi-Fi Protected Setup
(WPS) 1 Settings Connectivity Wi-Fi2
WPS PBCWPS PIN 3
Start
Mobile AP
Settings ConnectivityMobile AP
Mobile AP
OK
Wi-Fi direct
Configuring Wi-Fi direct
PC Connections
Configuring Your Phone USB Settings
troubleshooting
Message
Try this to solve the problem:
Hearing Aid Compatibility with Mobile Phones When some mobile phones are used near some hearing devices (hearing aids and cochlear implants), users may detect a buzzing, humming, or whining noise. Some hearing devices are more immune than others to this interference noise, and phones also vary in the amount of interference they generate. The wireless telephone industry has developed ratings for some of their mobile phones, to assist hearing device users in nding phones that may be compatible with their hearing devices. Not all phones have been rated. Phones that are rated have the rating on their box or a label on the box. The ratings are not guarantees. Results will vary depending on the users hearing device and hearing loss. If your hearing device happens to be vulnerable to interfer-ence, you may not be able to use a rated phone successfully. Trying out the phone with your hearing device is the best way to evaluate it for your personal needs. M-Ratings: Phones rated M3 or M4 meet FCC requirements and are likely to gener-ate less interference to hearing devices than phones that are not labeled. M4 is the better/higher of the two ratings. T-Ratings: Phones rated T3 or T4 meet FCC requirements and are likely to be more usable with a hearing devices telecoil (T Switch or Telephone Switch) than unrated phones. T4 is the better/higher of the two ratings. (Note that not all hearing devices have telecoils in them.) Hearing devices may also be measured for immunity to this type of interference. Your hearing device manufacturer or hearing health professional may help you nd results for your hearing device. The more immune your hearing aid is, the less likely you are to experience interference noise from mobile phones. This phone has been tested and rated for use with hearing aids for some of the wireless technologies that it uses. However, there may be some newer wireless technologies used in this phone that have not been tested yet for use with hearing aids. It is important to try the different features of this phone thoroughly and in different locations, using your hearing aid or cochlear implant, to determine if you hear any interfering noise. Consult your service provider or the manufacturer of this phone for information on hearing aid compatibility. If you have questions about return or exchange policies, consult your service provider or phone retailer.