all | frequencies |
|
exhibits | applications |
---|---|---|---|---|
manual |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
Users Manual | Users Manual | 3.68 MiB | ||||
1 | Block Diagram | |||||||
1 | External Photos | |||||||
1 | ID Label/Location Info | |||||||
1 | Internal Photos | |||||||
1 | Operational Description | |||||||
1 | Test Report | |||||||
1 | Test Setup Photos |
1 | Users Manual | Users Manual | 3.68 MiB |
2007 Samsung Electronics Co., Ltd. All rights reserved. This users guide is provided for information purposes only. All information included herein is subject to change without notice. Samsung Electronics is not responsible for any direct or indirect damages, arising from or related to use of this users guide. CLX-2160 and CLX-2160N are model names of Samsung Electronics Co., Ltd. Samsung and Samsung logo are trademarks of Samsung Electronics Co., Ltd. PCL and PCL 6 are trademarks of Hewlett-Packard company. Microsoft, Windows, Windows 98, Windows Me, Windows 2000, Windows XP, Windows 2003 and Windows Vista are registered trademarks of Microsoft Corporation. UFST and MicroType are registered trademarks of Monotype Imaging Inc. TrueType, LaserWriter and Macintosh are trademarks of Apple Computer, Inc. All other brand or product names are trademarks of their respective companies or organizations. CONTACT SAMSUNG WORLD WIDE If you have any comments or questions regarding Samsung products, contact the Samsung customer care center. Country Customer Care Center Web Site Country Customer Care Center Web Site LUXEMBURG 02 261 03 710 www.samsung.lu 800-726-7864 (SAMSUNG) www.samsung.com/cl www.samsung.com.cn POLAND 0 801 801 881 www.samsung.com/ar www.samsung.com/au www.samsung.com/be www.samsung.com/br www.samsung.com/ca ARGENTINE 0800-333-3733 AUSTRALIA 1300 362 603 02 201 2418 0800-124-421 4004-0000 1-800-SAMSUNG
(7267864) 800-810-5858 010- 6475 1880 BELGIUM BRAZIL CANADA CHILE CHINA CZECH REPUBLIC DENMARK ECUADOR COLOMBIA 01-8000-112-112 COSTA RICA 0-800-507-7267 www.samsung.com/co www.samsung.com/latin 844 000 844 www.samsung.com/cz Distributor pro eskou republiku : Samsung Zrt., eska organizan sloka Vyskoilova 4, 14000 Praha 4 38 322 887 www.samsung.com/dk 1-800-10-7267 EL SALVADOR 800-6225 FINLAND FRANCE GERMANY 09 693 79 554 08 25 08 65 65
( 0,15/min) 01805 - 121213
( 0,14/min) www.samsung.com/latin www.samsung.com/latin www.samsung.com/fi www.samsung.com/fr www.samsung.de GUATEMALA 1-800-299-0013 www.samsung.com/latin HONG KONG 3698 4698 HUNGARY 06 40 985 985 INDIA 3030 8282 1800 110 011 www.samsung.com/hk www.samsung.com/hu www.samsung.com/in INDONESIA 0800-112-8888 www.samsung.com/id ITALIA JAMAICA JAPAN 800 SAMSUNG(7267864) www.samsung.com/it 1-800-234-7267 0120-327-527 www.samsung.com/latin www.samsung.com/jp MALAYSIA MEXICO NETHERLANDS NORWAY PANAMA PHILIPPINES 1800-88-9999 01-800-SAMSUNG
(7267864) 0900 20 200 88
( 0,10/min) 231 627 22 800-7267 1800-10-SAMSUNG
(7267864) PORTUGAL 80 8 200 128 PUERTO RICO 1-800-682-3180 REP. DOMINICA 1-800-751-2676 www.samsung.com/my www.samsung.com/mx www.samsung.com/nl www.samsung.com/no www.samsung.com/latin www.samsung.com/ph www.samsung.com/pl www.samsung.com/pt www.samsung.com/latin www.samsung.com/latin RUSSIA 8-800-200-0400 www.samsung.ru SINGAPORE 1800-SAMSUNG (7267864) www.samsung.com/sg SLOVAKIA 0850 123 989 www.samsung.com/sk SOUTH AFRICA 0860 7267864 (SAMSUNG) www.samsung.com/za SPAIN SWEDEN TAIWAN THAILAND TRINIDAD &
TOBAGO U.A.E U.K U.S.A 902 10 11 30 08 585 367 87 0800-329-999 1800-29-3232 02-689-3232 www.samsung.com/es www.samsung.com/se www.samsung.com/tw www.samsung.com/th 1-800-7267-864 www.samsung.com/latin 800SAMSUNG (7267864) www.samsung.com/mea 0870 726 7864 1-800-SAMSUNG
(7267864) UKRAINE 8-800-502-0000 VENEZUELA 1-800-100-5303 VIETNAM 1 800 588 889 www.samsung.com/uk www.samsung.com www.samsung.com/ur www.samsung.com/latin www.samsung.com/vn CONTENTS 1. Introduction Special features ...................................................................................................................................................... 1.1 Machine overview ................................................................................................................................................... 1.2 Front view ........................................................................................................................................................... 1.2 Rear view ........................................................................................................................................................... 1.2 Control panel overview ........................................................................................................................................... 1.3 Introducing useful buttons ....................................................................................................................................... 1.4 ID copy button .................................................................................................................................................... 1.4 USB Print button ................................................................................................................................................ 1.4 Scan to button .................................................................................................................................................... 1.4 Understanding the Status LED ............................................................................................................................... 1.4 Status LED ......................................................................................................................................................... 1.4 Status LED with the toner cartridge messages .................................................................................................. 1.5 Finding more information ........................................................................................................................................ 1.5 Selecting a location ................................................................................................................................................. 1.6 2. System setup Menu overview ........................................................................................................................................................ 2.1 Changing the display language .............................................................................................................................. 2.2 Using the power save mode ................................................................................................................................... 2.2 Altitude Adjustment ................................................................................................................................................. 2.2 Auto Continue ......................................................................................................................................................... 2.2 3. Software overview Supplied software ................................................................................................................................................... 3.1 Printer driver features ............................................................................................................................................. 3.1 System requirements .............................................................................................................................................. 3.2 4. Network setup
(CLX-2160N only) Introduction ............................................................................................................................................................. 4.1 Via network administration programs ................................................................................................................. 4.1 Via the control panel .......................................................................................................................................... 4.1 Supported operating systems ................................................................................................................................. 4.1 Configuring TCP/IP ................................................................................................................................................. 4.1 Static addressing ................................................................................................................................................ 4.1 Dynamic addressing (BOOTP/DHCP) ............................................................................................................... 4.2 Setting Ethernet speed ........................................................................................................................................... 4.2 Restoring the network configuration ....................................................................................................................... 4.2 Printing a network configuration page .................................................................................................................... 4.2 5. Selecting and loading print media Loading originals ..................................................................................................................................................... 5.1 Selecting print media ............................................................................................................................................... 5.1
............................................................................................................................................................................ 5.1 Supported print media types and sizes ............................................................................................................... 5.2 Media sizes supported in each mode ................................................................................................................. 5.3 Guidelines for selecting and storing print media ................................................................................................. 5.3 Guidelines for special print media ....................................................................................................................... 5.3 Loading paper ......................................................................................................................................................... 5.5 In the tray ........................................................................................................................................................... 5.5 In the manual feeder ........................................................................................................................................... 5.7 Setting the paper size and type ............................................................................................................................... 5.8 6. Copying Selecting the paper tray .......................................................................................................................................... 6.1 Copying ................................................................................................................................................................... 6.1 Changing the settings for each copy ....................................................................................................................... 6.1 Reduced/Enlarged copy ..................................................................................................................................... 6.1 Darkness ............................................................................................................................................................. 6.1 Original type ........................................................................................................................................................ 6.2 Changing the default copy settings ......................................................................................................................... 6.2 Setting copy timeout ................................................................................................................................................ 6.2 ID card copying ....................................................................................................................................................... 6.3 Using special copy features .................................................................................................................................... 6.3 2-up or 4-up copying ........................................................................................................................................... 6.3 Poster copying .................................................................................................................................................... 6.4 Clone copying ..................................................................................................................................................... 6.4 Erasing background images ............................................................................................................................... 6.5 7. Basic printing Printing a document ................................................................................................................................................ 7.1 Canceling a print job ............................................................................................................................................... 7.1 8. Scanning Scanning basics ...................................................................................................................................................... 8.1 Scanning to an application using a local connection ............................................................................................... 8.1 Scanning using a network connection ..................................................................................................................... 8.2 Preparing for network scanning .......................................................................................................................... 8.2 Scanning to a network client ............................................................................................................................... 8.2 Changing the settings for each scan job ................................................................................................................. 8.3 Changing the default scan settings ......................................................................................................................... 8.3 9. Using USB flash memory About USB memory ................................................................................................................................................ 9.1 Plugging in a USB memory device .......................................................................................................................... 9.1 Scanning to a USB memory device ........................................................................................................................ 9.2 Scanning ............................................................................................................................................................. 9.2 Customizing Scan to USB .................................................................................................................................. 9.2 Printing from a USB memory device ....................................................................................................................... 9.2 Managing USB memory .......................................................................................................................................... 9.3 Deleting an image file ......................................................................................................................................... 9.3 Formatting a USB memory device ...................................................................................................................... 9.3 Viewing the USB memory status ........................................................................................................................ 9.3 Printing directly from a digital camera ..................................................................................................................... 9.3 10. Maintenance Printing reports ...................................................................................................................................................... 10.1 Printing a report ................................................................................................................................................ 10.1 Clearing memory ................................................................................................................................................... 10.1 Cleaning your machine ......................................................................................................................................... 10.2 Cleaning the outside ......................................................................................................................................... 10.2 Cleaning the inside ........................................................................................................................................... 10.2 Cleaning the scan unit ...................................................................................................................................... 10.3 Maintaining the toner cartridge .............................................................................................................................. 10.4 Toner cartridge storage .................................................................................................................................... 10.4 Expected cartridge life ...................................................................................................................................... 10.4 Redistributing toner ............................................................................................................................................... 10.4 Replacing the toner cartridge ................................................................................................................................ 10.5 Replacing the Imaging Unit ................................................................................................................................... 10.6 Replacing the Waste Toner Container .................................................................................................................. 10.8 Maintenance Parts ................................................................................................................................................ 10.9 Checking replaceables ..................................................................................................................................... 10.9 Managing your machine from the website ............................................................................................................ 10.9 Checking the machines serial number ................................................................................................................. 10.9 11. Troubleshooting Tips for avoiding paper jams ................................................................................................................................. 11.1 Clearing paper jams .............................................................................................................................................. 11.1 In the tray .......................................................................................................................................................... 11.1 In the mamual feeder ........................................................................................................................................ 11.2 In the paper exit area ........................................................................................................................................ 11.2 Understanding display messages ......................................................................................................................... 11.3 Solving other problems ......................................................................................................................................... 11.5 Paper feeding problems .................................................................................................................................... 11.5 Printing problems .............................................................................................................................................. 11.6 Printing quality problems .................................................................................................................................. 11.7 Copying problems ........................................................................................................................................... 11.10 Scanning problems ......................................................................................................................................... 11.10 Network Scan problems (CLX-2160N only) .................................................................................................... 11.11 Common Windows problems .......................................................................................................................... 11.11 Common Macintosh problems ........................................................................................................................ 11.11 Common Linux problems ................................................................................................................................ 11.12 12. Ordering supplies Supplies ................................................................................................................................................................ 12.1 How to purchase ................................................................................................................................................... 12.1 13. Specifications General specifications ........................................................................................................................................... 13.1 Printer specifications ............................................................................................................................................. 13.1 Scanner and copier specifications ........................................................................................................................ 13.2 Index Safety and Regulatory Information Important Precautions and Safety Information When using this machine, these basic safety precautions should always be followed to reduce risk of fire, electric shock, and injury to people:
1 Read and understand all instructions. 2 Use common sense whenever operating electrical appliances. 3 Follow all warnings and instructions marked on the machine and in the literature accompanying the machine. If an operating instruction appears to conflict with safety information, heed the safety information. You may have misunderstood the operating instruction. If you cannot resolve the conflict, contact your sales or service representative for assistance. 4 5 Unplug the machine from the AC wall socket before cleaning. Do not use liquid or aerosol cleaners. Use only a damp cloth for cleaning. 6 Do not place the machine on an unstable cart, stand or table. It may fall, 7 causing serious damage. Your machine should never be placed on, near or over a radiator, heater, air conditioner or ventilation duct. 8 Do not allow anything to rest on the power cable. Do not locate your machine where the cords will be abused by persons walking on them. 9 Do not overload wall outlets and extension cords. This can diminish performance, and may result in the risk of fire or electric shock. 10 Do not allow pets to chew on the AC power or PC interface cords. 11 Never push objects of any kind into the machine through case or cabinet openings. They may touch dangerous voltage points, creating a risk of fire or shock. Never spill liquid of any kind onto or into the machine. 12 To reduce the risk of electric shock, do not disassemble the machine. Take it to a qualified service technician when repair work is required. Opening or removing covers may expose you to dangerous voltages or other risks. Incorrect reassembly could cause electric shock when the unit is subsequently used. 13 Unplug the machine from the PC and AC wall outlet, and refer servicing to qualified service personnel under the following conditions:
When any part of the power cord, plug, or connecting cable is damaged or frayed. If liquid has been spilled into the machine. If the machine has been exposed to rain or water. If the machine does not operate properly after instructions have been followed. If the machine has been dropped, or the cabinet appears damaged. If the machine exhibits a sudden and distinct change in performance. 14 Adjust only those controls covered by the operating instructions. Improper adjustment of other controls may result in damage, and may require extensive work by a qualified service technician to restore the machine to normal operation. 15 Avoid using this machine during a lightning storm. There may be a remote risk of electric shock from lightning. If possible, unplug the AC power for the duration of the lightning storm. 16 If you continuously print multiple pages, the surface of the output tray may become hot. Be careful not to touch the surface, and keep children away from the surface. 17 The Power cord supplied with your machine should be used for safe operation. If you are using a cord which is longer than 2 m with 110 V machine, then it should be 16 AWG* or bigger. 18 SAVE THESE INSTRUCTIONS. Environmental and Safety Consideration Laser Safety Statement The printer is certified in the U.S. to conform to the requirements of DHHS 21 CFR, chapter 1 Subchapter J for Class I(1) laser products, and elsewhere, is certified as a Class I laser product conforming to the requirements of IEC 825. Class I laser products are not considered to be hazardous. The laser system and printer are designed so there is never any human access to laser radiation above a Class I level during normal operation, user maintenance, or prescribed service condition. Warning Never operate or service the printer with the protective cover removed from Laser/Scanner assembly. The reflected beam, although invisible, can damage your eyes. When using this product, these basic safety precautions should always be followed to reduce risk of fire, electric shock, and injury to persons:
* AWG: American Wire Gauge vi Ozone Safety During normal operation, this machine produces ozone. The ozone produced does not present a hazard to the operator. However, it is advisable that the machine be operated in a well ventilated area. If you need additional information about ozone, please contact your nearest Samsung dealer. Mercury Safety LAMP(S) INSIDE THIS PRODUCT CONTAIN MERCURY AND MUST BE RECYCLED OR DISPOSED OF ACCORDING TO LOCAL, STATE OR FEDERAL LAWS. For details see lamprecycle.org, eiae.org, or call 1-800-Samsung Power Saver This printer contains advanced energy conservation technology that reduces power consumption when it is not in active use. When the printer does not receive data for an extended period of time, power consumption is automatically lowered. Recycling Please recycle or dispose of packaging materials for this product in an environmentally responsible manner. Correct Disposal of This Product (Waste Electrical
& Electronic Equipment)
(Applicable in the European Union and other European countries with separate collection systems) This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources. Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take this item for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contract. This product should not be mixed with other commercial wastes for disposal. Radio Frequency Emissions FCC Regulations This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
This device may not cause harmful interference, and This device must accept any interference received, including interference that may cause undesired operation. This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Caution:
Changes or modifications not expressly approved by the manufacturer responsible for compliance could void the users authority to operate the equipment. Canadian Radio Interference Regulations This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus as set out in the interference-causing equipment standard entitled Digital Apparatus, ICES-003 of the Industry and Science Canada. Cet appareil numrique respecte les limites de bruits radiolectriques applicables aux appareils numriques de Classe B prescrites dans la norme sur le matriel brouilleur: Appareils Numriques, ICES-003 dicte par lIndustrie et Sciences Canada. Declaration of Conformity (European Countries) Approvals and Certifications The CE marking applied to this product symbolises Samsung Electronics Co., Ltd. Declaration of Conformity with the following applicable 93/68/EEC Directives of the European Union as of the dates indicated:
January 1, 1995: Council Directive 73/23/EEC Approximation of the laws of the member states related to low voltage equipment. January 1, 1996: Council Directive 89/336/EEC (92/31/EEC), approximation of the laws of the Member States related to electromagnetic compatibility. March 9, 1999: Council Directive 1999/5/EC on radio equipment and telecommunications terminal equipment and the mutual recognition of their conformity. A full declaration, defining the relevant Directives and referenced standards can be obtained from your Samsung Electronics Co., Ltd. representative. vii Replacing the Fitted Plug (for UK Only) Important The mains lead for this machine is fitted with a standard (BS 1363) 13 amp plug and has a 13 amp fuse. When you change or examine the fuse, you must re-fit the correct 13 amp fuse. You then need to replace the fuse cover. If you have lost the fuse cover, do not use the plug until you have another fuse cover. Please contact the people from you purchased the machine. The 13 amp plug is the most widely used type in the UK and should be suitable. However, some buildings (mainly old ones) do not have normal 13 amp plug sockets. You need to buy a suitable plug adaptor. Do not remove the moulded plug. Warning If you cut off the moulded plug, get rid of it straight away. You cannot rewire the plug and you may receive an electric shock if you plug it into a socket. Important warning: You must earth this machine. The wires in the mains lead have the following color code:
Green and Yellow:
Blue:
Brown:
If the wires in the mains lead do not match the colors marked in your plug, do the following:
You must connect the green and yellow wire to the pin marked by the letter E or by the safety Earth symbol or colored green and yellow or green. You must connect the blue wire to the pin which is marked with the letter N or colored black. You must connect the brown wire to the pin which is marked with the letter L or colored red. You must have a 13 amp fuse in the plug, adaptor, or at the distribution board. Earth Neutral Live viii ix 1 Introduction Thank you for purchasing this Samsung multifunctional product. Your machine provides printing, copying, scanning functions. This chapter includes:
Special features
Machine overview
Selecting a location Finding more information Special features Your new machine is equipped with special features. Print with excellent quality and speed You can print in full range of colors using cyan, magenta, yellow, and black. You can print up to 2400 x 600 dpi (effective output). For details, see the Software Section. In Black and White mode, your machine prints A4-sized paper at up to 16 ppma and letter-sized paper at up to 17 ppm. In Color mode, your machine prints A4-sized or letter sized paper at up to 4 ppm. Handle paper flexibly The manual feeder supports letterhead, envelopes, labels, transparencies, custom-sized media, postcards, and heavy paper. The manual feeder holds up 1 sheet of paper. The 150-sheet tray support plain paper in various sizes. Create professional documents Print Watermarks. You can customize your documents with words, such as Confidential. See the Software Section. Print Posters. The text and pictures of each page of your document are magnified and printed across the sheet of paper and can then be taped together to form a poster. See the Software Section. Save time and money You can print multiple pages on one single sheet of paper to save paper. You can use preprinted forms and letterhead with plain paper. See the Software Section. This machine automatically conserves electricity by substantially reducing power consumption when not in use. Print in various environments You can print with Windows 98/Me/2000 and Windows XP/2003/Vista as well as Linux and Macintosh systems. Your machine is equipped with a USB interface and a network interface (CLX-2160N only). Copy originals in several formats Your machine can print multiple image copies from the original document on a single page. There are special functions to erase catalog and newspaper background. The print quality and image size may be adjusted and enhance at the same time. Scan the originals and send it right away Scan in color and use the precise compressions of JPEG, TIFF and PDF formats. Quickly scan and send files to multiple destinations using Networks scanning
(CLX-2160N only). Machine features The table below lists a general overview of features supported by your machine.
(I: Installed, O: Option, NA: Not Available) Features CLX-2160 CLX-2160N USB 2.0 USB Memory PictBridge Network Interface
(Ethernet 10/100 Base TX) I I I NA I I I I a. pages per minute 1.1 <Introduction>
Machine overview These are the main components of your machine:
Front view Rear view
* The figure above shows an CLX-2160N with all available accessories. 5 rear cover 1 2 3 4 power switch network port USB port power receptacle
* The figure above shows an CLX-2160N with all available accessories. 10 manual feeder paper width guides waste toner container 11 toner cartridges 12 13 imaging unit 1 2 3 4 5 6 7 8 9 scanner lid scanner glass USB memory port front cover handle control panel output support tray manual feeder Note The surface of the output tray may become hot if you print a large number of pages at once. Please make sure that you dont touch the surface, and prvent children from approaching it. 1.2 <Introduction>
Control panel overview 1 2 3 4 5 6 7 8 9 10 11 12 Display: Shows the current status and prompts during an operation. 13 Stop/Clear: Stops an operation at any time. In Standby mode, clears/cancels the copy options, such as the darkness, the document type setting, the copy size, and the number of copies. Toner colors: The toner colors shown below the LCD display co-
works with display messages. See Status LED with the toner cartridge messages on page 1.4. Status: Shows the status of your machine. See page 1.4. Menu: Enters Menu mode and scrolls through the available menus. Scroll buttons: Scroll through the options available in the selected menu, and increase or decrease values. OK: Confirms the selection on the screen. Back: Sends you back to the upper menu level. ID copy: You can copy both sides of the ID Card like a drivers license to a single side of paper. USB Print:Allows you to directly print files stored on a USB flash drive when it is inserted into the USB port in the front of your machine. Scan to: Allows you to access a list of the PC software programs that an image can be scanned to. Black Start: Starts a job in Black and White mode. Color Start: Starts a job in Color mode. 1.3 <Introduction>
Introducing useful buttons Understanding the Status LED ID copy button The Status LED on the control panel shows the status of your machine. See the table below to know your machines status. When you press this button, your machine prints one side of the original on the upper half of the paper and the other side on the lower half without reducing the size of the original. This feature is helpful for copying a small-sized item, such as a drivers license or other photo ID. This copy feature is available only when you place originals directly on the scanner glass. See page 6.3 USB Print button Scan to button When you press this button, USB memory devices store your files on a small, portable device that you can take anywhere and use in most any USB-friendly machine. They are available in a variety of memory sizes to give you more room for storing documents and presentations to downloading music and full videos, high resolution photographs, or whatever other files you want to store or move. See page 9.2 When you press this button, your machine offers the following ways to scan an image using a simple scanner to PC (local) connection. SmarThru program, Windows images Acquisition
(WIA) driver or USB memory device easy ways to do this are with preset imaging applications. with these applications, scanning an image launches the selected appliction, enabling you to control the scanning process. See page 8.1 Status LED Status Off Green Blinking On Blinking Red On Description The machine is off-line. The machine is in Power Save mode. When data is received, or any button is pressed, it switches to on-line automatically. When the backlight slowly blinks, the machine is receiving data from the computer. When the backlight fast blinks, the machine is printing data. The machine is on-line and can be used. A minor error occurs and the machine is waiting an error to be cleared. Check the display message, and solve the problem referring to Understanding display messages, see page 11.3. The toner cartridge is low. Order a new toner cartridge, see Ordering supplies on page 12.1. You can temporarily improve print quality by redistributing the toner. See page 10.4. The toner cartridge is totally exhausted. Remove the old toner cartridge and install a new one. See page 10.5. A problem has occurred such as a paper jam, opened cover or no paper in the tray, so that the machine can not continue the job. Check the message on the display, and refer to Understanidng display messages on page 11.3 to solve the problem. The toner cartridge is low, empty, or needs to be installed a new one. See Understanding the toner cartridge messages on the display Note Always check the message on the display to solve the problem. The instruction in Trouble shooting part will guide you to operate the machine properly. See page 11.1 1.4 <Introduction>
Status LED with the toner cartridge messages The status of toner cartridges is indicated by the status LED and the LCD display. If the toner cartridge is low or needs to be changed, the status LED turns on red and the display shows the message. However the arrow mark (or marks) shows which color toner needs to be concerned or may be installed with a new cartridge. Example) Finding more information You can find information for setting up and using your machine from the following resources, either printed or onscreen. Quick Install Guide Provides information on setting up your machine and, therefore, be sure to follow the instructions in the guide to get the machine ready. The above example shows the toner cartridges' status of the color shown by arrows. Check the message to find out what the problem is and how to solve it. See page 11.3 to browse the detailed information on error messages. Online Users Guide Network Printer Users Guide Printer Driver Help Provides you with step-by-step instructions for using your machines full features, and contains information for maintaining your machine, troubleshooting, and installing accessories. This users guide also contains the Software Section providing you with information on how to print documents with your machine on various operating systems, and how to use the supplied software utilities. Note You can access the users guides in other languages from the Manual folder on the Printer software CD. If your machine is not equipped with a network interface, this CD is not provided. Contained on the network utilities CD, provides you with information on setting up and connecting your machine to a network. Provides you with help information on printer driver properties and instructions for setting up the properties for printing. To access a printer driver help screen, click Help from the printer properties dialog box. Website If you have Internet access, you can get help, support, printer drivers, manuals, and order information from the Samsung website, www.samsungprinter.com. 1.5 <Introduction>
Selecting a location Select a level, stable place with adequate space for air circulation. Allow extra space for opening covers and trays. The area should be well-ventilated and away from direct sunlight or sources of heat, cold, and humidity. Do not set the machine close to the edge of your desk or table. Clearance space Front: 482.6 mm
(enough space so that the paper tray can be removed) Back: 100 mm (enough space for ventilation) Right: 100 mm (enough space for ventilation) Left: 100 mm (enough space for ventilation) Note When you move the printer, do not tilt or turn it upside down. Or the inside of the printer may be contaminated by toner, which can cause damage to the printer or bad printing quality. Altitude Setting after Software Installation The print quality is affected by atmospheric pressure, which is determined by the height of the machine above sea level. The following information will guide you on how to set your machine to the best print quality or best quality of print. Before you set the altitude value, check your citys altitude. 1 2 3 4 Value High 3 High 2 High 1 Normal 1 2 3 4 Ensure that you have installed the printer driver with the provided Printer Software CD. 0 1 2 Click Windows Start > Programs or All Programs > your printer driver name > Smart Panel. 3 Click Printer Setting. 4 Click Settings > Altitude Adjustment. Select the appropriate value from the dropdown list, and then click Apply. Note If your machine is connected to a network, the screen appears. Click Machine Settings > Setup (or Machine Setup) >
Altitude Adj. Select the appropriate altitude value, and then click Apply. 1.6 <Introduction>
2 System setup This chapter gives you an overview of menus available on your machine and step-by-step instructions for setting up the machines systems. This chapter includes:
Menu overview
Changing the display language
Using the power save mode
Altitude Adjustment
Auto Continue Menu overview The control panel provides access to various menus to set up the machine or use the machines functions. These menus can be accessed by pressing Menu. Refer to the following diagram. Menus available in Copy or Scan mode vary. Note Some menus may not appear in the display depending on your country. If so, it is not applicable to your machine. Copy Menu Copy Feature
( See page 6.3) Reduce/Enlarge Darkness Original Type 2-Up 4-Up Poster Copy Clone Copy Erase Bkgd. Scan Menu Scan Feature
( See page 8.1) USB Memory Scan Size Original Type Resolution Scan Color Scan Format Copy Setup
( See page 6.1) Change Default Copies Reduce/Enlarge Darkness Original Type Scan Setup Change Default USB Memory Network a
( See page 4.1) TCP/IP Ethernet Speed Clear Setting Network Info a. CLX-2160N only Network a
( See page 4.1) TCP/IP Ethernet Speed Clear Setting Network Info a. CLX-2160N only System Setup Machine Setup ( See page 2.2) Language Power Save Timeout Netscan Timeout a Altitude Adj. Auto Continue Paper Size Paper Type Paper Source Paper Setup (See page 5.8) Report (See page 10.1) Maintenance (See page 10.9) Supplies Life Color Serial Number Clear Setting (See page 10.1) a. CLX-2160N only System Setup Machine Setup ( See page 2.2) Language Power Save Timeout Netscan Timeout a Altitude Adj. Auto Continue Paper Size Paper Type Paper Source Paper Setup (See page 5.8) Report (See page 10.1) Maintenance (See page 10.9) Supplies Life Color Serial Number Clear Setting (See page 10.1) a. CLX-2160N only 2.1 <System setup>
Changing the display language Auto Continue This is the option to set the machine to continue printing or not, in case the paper size you have set and the paper within the tray mismatches. 1 Press Menu until Copy Menu appears on the bottom line of the display and press OK. Press Scroll buttons until System Setup appears and press OK. Press Scroll buttons until Machine Setup appears and press OK. Press the Scroll buttons until Auto Continue appears and press OK. Press the Scroll buttons until the binding option you want appears. On: automatically prints after set time passes, when the paper size mismatches the tray paper size. Off: waits until you press Start on the control panel, when the paper size mismatches the tray paper size. Press OK to save your selection. Press Stop/Clear to return to Standby mode. 2 3 4 5 6 7 To change the language that appears on the control panel, follow these steps:
1 Press Menu until Copy Menu appears on the bottom line of the display and press OK. Press the Scroll buttons until System Setup appears and press OK. Press the Scroll buttons until Machine Setup appears and press OK. Press the Scroll buttons until Language appears and press OK. Press the Scroll buttons until the language you want appears and press OK. Press Stop/Clear to return to Standby mode. 2 3 4 5 6 Using the power save mode Power Save mode allows your machine to reduce power consumption when it is not in actual use. You can turn this mode on and select a length of time for which the machine waits after a job is printed before it switches to a reduced power state. 1 Press Menu until Copy Menu appears on the bottom line of the display and press OK. Press the Scroll buttons until System Setup appears and press OK. Press the Scroll buttons until Machine Setup appears and press OK. Press the Scroll buttons until Power Save appears and press OK. Press the Scroll buttons until the time setting you want appears and press OK. Press Stop/Clear to return to Standby mode. 2 3 4 5 6 Altitude Adjustment The atmospheric pressure could affect the printing quality. If you use the machine in over 1,000 m height altitude area, set the Altitude as recommended in step 4 below. 1 Press Menu until Copy Menu appears on the bottom line of the display and press OK. Press Scroll buttons until System Setup appears and press OK. Press Scroll buttons until Machine Setup appears and press OK. Press the Scroll buttons until Altitude Adj. appears and press OK. Press the Scroll buttons until the binding option you want appears. See page 1.6. Press OK to save your selection. Press Stop/Clear to return to Standby mode. 2.2 <System setup>
2 3 4 5 6 7 3 Software overview This chapter gives you an overview of the software that comes with your machine. Further details about installing and using the software are explained in the Software Section. This chapter includes:
Supplied software
Printer driver features
System requirements Supplied software You must install the printer and scanner software using the supplied CDs after you have set up your machine and connected it to your computer. Each CD provides you with the following software:
CD Printer software CD
(continued) Macintosh Windows Network utilities CD
(CLX-2160N only) Contents Printer driver: Use this driver to run your machine from a Macintosh. Scanner driver: TWAIN driver is available for scanning documents on your machine. Smart Panel: This program allows you to monitor the machines status and alerts you when an error occurs during printing. SyncThru Web Admin Service:
Use this web-based program to remotely manage, monitor, and troubleshoot network printers. Set IP: Use this program to set your machines TCP/IP addresses. Network Printer Users Guide in PDF CD Printer software CD Windows Linux Contents Printer driver: Use this driver to take full advantage of your printers features. Scanner driver: TWAIN and Windows Image Acquisition (WIA) drivers are available for scanning documents on your machine. Smart Panel: This program allows you to monitor the machines status and alerts you when an error occurs during printing. SmarThrua: This is the accompanying Windows-based software for your multifunctional machine. Network Scan (CLX-2160N only):
This program allows you to scan a document on your machine and save it to a network-connected computer. Users Guide in PDF Printer driver: Use this driver to run your machine from a Linux computer and print documents. SANE: Use this driver to scan documents. Smart Panel: This program allows you to monitor the machines status and alerts you when an error occurs during printing. a. Allows you to edit a scanned image in many ways using a powerful image edi-
tor and to send the image by email. You can also open another image editor program, like Adobe Photoshop, from SmarThru. For details, please refer to the onscreen help supplied on the SmarThru program. Printer driver features Your printer drivers support the following standard features:
Paper orientation, size, source and media type selection Number of copies In addition, you can use various special printing features. The following table shows a general overview of features supported by your printer drivers:
Feature Print quality option Multiple pages per sheet (N-up) Poster printing Booklet Printing Fit to page printing Scale printing Different source for first page Watermark Overlay Printer Driver Macintosh Windows O O O O O O O O O O O X X O
( Mac 10.4 only) O O X X Linux O O (2, 4) X X X X X X X 3.1 <Software overview>
System requirements Linux Before you begin, ensure that your system meets the following requirements:
Windows Item Operating system CPU RAM Free disk space Internet Explorer Requirements Windows 98/Me/2000/XP/2003/Vista Windows 98/Me/2000 Windows XP/2003/
Vista Windows 98/Me/2000 Windows XP/2003 Windows Vista Windows 98/Me/2000 Windows XP/2003 Windows Vista Windows 98/Me/2000/
XP/2003 Windows Vista Pentium II 400 MHz or higher Pentium III 933 MHz or higher 64 MB or more 128 MB or more 512 MB or more 300 MB or more 1 GB or more 15 GB or more 5.0 or higher 7.0 or higher Recomme nded Pentium III 933 MHz Pentium IV 1 GHz 128 MB 256 MB 1 GB 1 GB 5 GB 15 GB Note For Windows 2000/2003/XP/Vista, users who have an administrator right can install the software. Item Requirements Operating system CPU RAM Free disk page Software RedHat 8.0 ~ 9.0 Fedora Core 1, 2, 3, 4 Mandrake 9.2 ~ 10.1 SuSE 8.2 ~ 9.2 Pentium IV 1 GHz or higher 256 MB or higher 1 GB or higher Linux Kernel 2.4 or higher Glibc 2.2 or higher CUPS SANE(for MFP device only) Note Its necessary to claim swap partition of 300 MB or larger for working with large scanned images. The Linux scanner driver supports the optical resolution at maximum. Macintosh Item Operating system CPU RAM Free disk space Connection Requirements Macintosh 10.3 ~ 10.4 Intel processor PowerPC G4/G5 512 MB for an Intel-based Mac, 128 MB for a Power-PC based Mac 1 GB USB interface, Network interface (CLX-2160 only) 3.2 <Software overview>
4 Network setup
(CLX-2160N only) Introduction This chapter gives you step-by-step instructions for setting up your machine for network connections. This chapter includes:
Supported operating systems
Configuring TCP/IP
Setting Ethernet speed
Restoring the network configuration
Printing a network configuration page Introduction Once you have connected your machine to a network with an RJ-45 Ethernet cable, you can share the machine with other network users. You need to set up the network protocols on the machine to use it as your network printer. Protocols can be set up by the following two methods:
Via network administration programs You can configure your machines print server settings and manage the machine via the following programs that came with your machine:
SyncThru Web Admin Service: A web-based printer management solution for network administrators. SyncThru Web Admin Service provides you with an efficient way of managing network devices and lets you remotely monitor and troubleshoot network printers from any site with corporate intranet access. SyncThru Web Service: A web server embedded to your network print server, which allows you to:
- Configure the network parameters necessary for the machine to connect to various network environments.
- Customize printer, copy, and fax settings. SetIP: A utility program allowing you to select a network interface and manually configure the addresses for use with the TCP/IP protocol. For further details, refer to the users guide on the network utilities CD that came with your machine. Via the control panel You can set up the following basic network parameters through the machines control panel:
Configure TCP/IP Configure Ethernet Speed Supported operating systems The following table shows the network environments supported by the machine:
Item Requirements Network interface Ethernet 10/100 Base-TX Network operating system Windows 98/Me/2000/XP/2003/Vista Various Linux OS Macintosh OS 10.3 ~ 10.4 Network protocols TCP/IP IPP, SNMP Dynamic addressing server DHCP, BOOTP TCP/IP: Transmission Control Protocol/Internet Protocol IPP: Internet Printing Protocol SNMP: Simple Network Management Protocol DHCP: Dynamic Host Configuration Protocol BOOTP: Bootstrap Protocol Configuring TCP/IP Your machine can be set up with a variety of TCP/IP network information, such as an IP address, a subnet mask, a gateway, and DNS addresses. There are several ways in which your machine can be assigned a TCP/
IP address, depending on your network. Static addressing: A TCP/IP address is assigned manually by the system administrator. Dynamic addressing via BOOTP/DHCP: A TCP/IP address is assigned automatically by the server. Note Before configuring TCP/IP, you need to set the network protocol to TCP/IP. Static addressing To enter a TCP/IP address from your machines control panel, take the following steps:
1 Press Menu until Copy Menu appears on the bottom line of the display and press OK. Press the Scroll buttons until Network appears and press OK. Press OK when TCP/IP appears. Press the Scroll buttons until Static appears and press OK. Press OK when IP Address appears. 2 3 4 5 4.1 <Network setup (CLX-2160N only)>
6 Set the first byte between 0 and 255 using the Scroll buttons and press OK to move to the next byte. Repeat this to complete the address from the 1st byte to the 4th byte. 7 When you have finished, press OK. 8 Repeat steps 5 and 6 to configure the other TCP/IP parameters:
subnet mask and gateway address. Press the Scroll buttons until Static appears and press OK. 9 10 Press the Scroll buttons until Primary DNS appears and press OK. 11 Enter each byte of the address and press OK. 12 Press the Scroll buttons until Secondary DNS appears and press OK. 13 Enter each byte of the address and press OK. 14 Press Stop/Clear to return to Standby mode. Dynamic addressing (BOOTP/DHCP) To have a TCP/IP address assigned automatically by the server, take the following steps:
1 Press Menu until Copy Menu appears on the bottom line of the display and press OK. Press the Scroll buttons until Network appears and press OK. Press OK when TCP/IP appears. Press the Scroll buttons until DHCP or BOOTP appears and press OK. Press Stop/Clear to return to Standby mode. 2 3 4 5 Restoring the network configuration You can return the network configuration to its default settings. 1 Press Menu until Copy Menu appears on the bottom line of the display and press OK. Press the Scroll buttons until Network appears and press OK. Press the Scroll buttons until Clear Setting appears and press OK. Press OK when Yes appears to restore the network configuration. Power the machine off and back on. Printing a network configuration page 2 3 4 5 The Network Configuration page shows how the network interface card on your machine is configured. 1 Press Menu until Copy Menu appears on the bottom line of the display and press OK. Press the Scroll buttons until Copy menu appears and press OK. Press the Scroll buttons until Network appears and press OK. Press the Scroll buttons until Network Info. appears and press OK. Press OK when Yes appears. The Network Configuration page prints out. 2 3 4 5 Setting Ethernet speed You can select the communication speed for Ethernet connections. 1 Press Menu until Copy Menu appears on the bottom line of the display and press OK. Press the Scroll buttons until Network appears and press OK. Press the Scroll buttons until Ethernet Speed appears and press OK. Press the Scroll buttons until the speed you want appears and press OK. Press Stop/Clear to return to Standby mode. 2 3 4 5 4.2 <Network setup (CLX-2160N only)>
5 Selecting and loading print media This chapter introduces you to how select and load print media for your machine. This chapter includes:
Loading originals
Selecting print media
Setting the paper size and type Loading paper Loading originals You can use the scanner glass to load an original for copying, scanning. 1 Lift and open the scanner lid. 2 Place the original face down on the scanner glass and align it with the registration guide at the top left corner of the glass. 3 Close the scanner lid. Be careful not to move the document. Note Leaving the scanner lid open while copying may affect copy quality and toner consumption. Dust on the scanner glass may cause black spots on the printout. Always keep it clean. If you are copying a page from a book or magazine, lift the scanner lid until its hinges are caught by the stopper and then close the lid. If the book or magazine is thicker than 30 mm, start copying with the lid open. Selecting print media You can print on a variety of print media, such as plain paper, envelopes, labels, and transparencies. Always use print media that meet the guidelines for use with your machine. Print media that does not meet the guidelines outlined in this users guide may cause the following problems:
Poor print quality Increased paper jams Premature wear on the machine. Properties, such as weight, composition, grain, and moisture content, are important factors that affect the machines performance and the output quality. When you choose print materials, consider the following:
The type, size and weight of the print media for your machine are described later in this section. Desired outcome: The print media you choose should be appropriate for your project. Brightness: Some print media are whiter than others and produce sharper, more vibrant images. Surface smoothness: The smoothness of the print media affects how crisp the printing looks on the paper. Note Some print media may meet all of the guidelines in this section and still not produce satisfactory results. This may be the result of improper handling, unacceptable temperature and humidity levels, or other variables over which Samsung has no control. Before purchasing large quantities of print media, ensure that it meets the requirements specified in this users guide. Caution Using print media that does not meet these specifications may cause problems, requiring repairs. Such repairs are not covered by Samsungs warranty or service agreements. 5.1 <Selecting and loading print media>
Supported print media types and sizes Type Size Dimensions Weight Capacitya Plain paper Envelope Letter Legal Folio Oficio A4 JIS B5 A5 A6 ISO/Envelope B5 Envelope Monarch Envelope COM-10 Envelope No.9 Envelope DL Envelope C5 Envelope C6 Envelope size 6 3/4 216 x 279 mm (8.50 x 11.00 inches) 216 x 356 mm (8.50 x 14.00 inches) 216 x 330 mm (8.50 x 13.00 inches) 215 x 343 mm (8.50 x 13.50 inches) 210 x 297 mm (8.26 x 11.69 inches) 182 x 257 mm (7.16 x 10.11 inches) 148 x 210 mm (5.82 x 8.26 inches) 105 x 148 mm (4.13 x 5.82 inches) 176 x 250 mm(6.93 x 9.84 inches) 98 x 191 mm (3.8 x 7.50 inches) 105 x 241 mm (4.12 x 9.50 inches) 98 x 225 mm (3.87 x 8.87 inches) 110 x 220 mm (4.33 x 8.66 inches) 162 x 229 mm (6.37 x 9.01 inches) 114 x 162 mm (4.48 x 6.38 inches) 92 x 165 mm (3.62 x 6.50 inches) Transparencyb Letter, A4 Refer to the Plain paper section Labels Card stock Letter, Legal, Folio, Oficio, A4, JIS B5, Executive, A5, A6 Letter, Legal, Folio, Oficio, A4, JIS B5, Executive, A5, A6 Refer to the Plain paper section 60 to 90 g/m2 (16 to 24 lb bond) for the paper input tray. 60 to 105 g/m2 (16 to 28 lb bond) for the tray and manual feeder 1 sheet for the manual feeder 150 sheets of 75 g/m2
(20 lb bond) paper for the tray 75 to 90 g/m2 (20 to 24 lb bond) 1 sheet for the manual feeder or tray 138 to 146 g/m2 (37 to 39 lb bond) 1 sheet for the manual feeder or tray 120 to 150 g/m2 (32 to 40 lb bond) 1 sheet for the manual feeder or tray Refer to the Plain paper section 105 to 163 g/m2 (28 to 43 lb bond) 1 sheet for the manual feeder or tray Minimum size (custom) Maximum size (custom) 76 x 127 mm (3.00 x 5.00 inches) 216 x 356 mm (8.50 x 14.00 inches) 60 to 163 g/m2
(16 to 43 lb bond) 1 sheet for the manual feeder or tray a. Maximum capacity may differ depending on media weight, thickness, and environmental conditions. b. Recommended media: Transparency for a Color Laser Printers produced by HP, Xerox and 3M. It is not recommended to use paperbacked transparencies such as Xerox 3R91334, which can cause a jam or be scratched. 5.2 <Selecting and loading print media>
Media sizes supported in each mode Mode Copy mode Print mode Size Letter, A4, Legal, Oficio, Folio, Executive, JIS B5, A5, A6 All sizes supported by the machine Source Tray Manual feeder Tray Manual feeder Guidelines for selecting and storing print media When selecting or loading paper, envelopes, or other print materials, keep these guidelines in mind:
Always use print media that conform with the specifications listed on page 5.5. Attempting to print on damp, curled, wrinkled, or torn paper can cause paper jams and poor print quality. For the best print quality, use only high quality copier grade paper specifically recommended for use in laser printers. Avoid using the following media types:
- Paper with embossed lettering, perforations, or a texture that is too smooth or too rough
- Erasable bond paper
- Multi-paged paper
- Synthetic paper and thermally reactive paper
- Carbonless paper and Tracing paper. Use of these types of paper could result in paper jams, chemical smells, and damage to your machine. Store print media in its ream wrapper until you are ready to use it. Place cartons on pallets or shelves, not on the floor. Do not place heavy objects on top of the paper, whether it is packaged or unpackaged. Keep it away from moisture or other conditions that can cause it to wrinkle or curl. Store unused print media at temperatures between 15o C and 30o C (59o F to 86o F). The relative humidity should be between 10% and 70%. Store unused print media in a moisture-proof wrap, such as a plastic container or bag, to prevent dust and moisture from contaminating your paper. Load special media types one sheet at a time through the manual feeder to avoid paper jams. To prevent print media, such as transparencies and label sheets, from sticking together, remove them as they print out. Guidelines for special print media Media type Guidelines Successful printing on envelopes depends upon the quality of the envelopes. When selecting envelopes, consider the following factors:
- Weight: The weight of the envelope paper should not exceed 90 g/m2 (24 lb) or jamming may occur.
- Construction: Prior to printing, envelopes should lie flat with less than 6 mm
(0.25 inches) curl, and should not contain air.
- Condition: Envelopes should not be wrinkled, nicked, or otherwise damaged.
- Temperature: You should use envelopes that are compatible with the heat and pressure of the machine during operation. Use only well-constructed envelopes with sharp and well creased folds. Do not use stamped envelopes. Do not use envelopes with clasps, snaps, windows, coated lining, self-adhesive seals, or other synthetic materials. Do not use damaged or poorly made envelopes. Be sure the seam at both ends of the envelope extends all the way to the corner of the envelope. Envelopes Acceptable Unacceptable Envelopes with a peel-off adhesive strip or with more than one flap that folds over to seal must use adhesives compatible with the printers fusing temperature for 0.1 second. Check your machines specification to view the fusing temperature, see page 13.1. The extra flaps and strips might cause wrinkling, creasing, or jams, and may even damage the fuser. For the best print quality, position margins no closer than 15 mm (0.6 inches) from the edges of the envelope. Avoid printing over the area where the envelopes seams meet. 5.3 <Selecting and loading print media>
Media type Guidelines Media type Guidelines To avoid damaging the machine, use only transparencies designed for use in laser printers. Transparencies used in the printer must be able to withstand the machines fusing temperature. Check your machines specification to view the fusing temperature, see page 13.1. Place them on a flat surface after removing them from the machine. Do not leave them in the paper tray for long periods of time. Dust and dirt may accumulate on them, resulting in spotty printing. To avoid smudging caused by fingerprints, handle them carefully. To avoid fading, do not expose printed transparencies to prolonged sunlight. Ensure that transparencies are not wrinkled, curled, or have any torn edges. Transparencies To avoid damaging the machine, use only labels designed for use in laser printers. When selecting labels, consider the following factors:
- Adhesives: The adhesive material should be stable at your machines fusing temperature. Check your machines specification to view the fusing temperature, see page 13.1.
- Arrangement: Only use labels with no exposed backing between them. Labels can peel off sheets that have spaces between the labels, causing serious jams.
- Curl: Prior to printing, labels must lie flat with no more than 13 mm (5 inches) of curl in any direction. Labels Caution Recommended media: Transparency for a Color Laser Printers produced by HP, Xerox and 3M. It is not recommended to use paperbacked transparencies such as Xerox 3R91334, which can cause a jam or be scratched. Card stock or custom-sized materials Preprinted paper
- Condition: Do not use labels with wrinkles, bubbles, or other indications of separation. Make sure that there is no exposed adhesive material between labels. Exposed areas can cause labels to peel off during printing, which can cause paper jams. Exposed adhesive can also cause damage to machine components. Do not run a sheet of labels through the machine more than once. The adhesive backing is designed for only a single pass through the machine. Do not use labels that are separating from the backing sheet or are wrinkled, bubbled, or otherwise damaged. Do not print on media smaller than 76 mm
(3.00 inches) wide or 127 mm (5.00 inches) long. In the software application, set margins at least 6.4 mm (0.25 inches) away from the edges of the material. Letterhead must be printed with heat-resistant ink that will not melt, vaporize, or release hazardous emissions when subjected to the printers fusing temperature for 0.1 second. Check your machines specification to view the fusing temperature, see page 13.1. Letterhead ink must be non-flammable and should not adversely affect printer rollers. Forms and letterhead should be sealed in a moisture-proof wrapping to prevent changes during storage. Before you load preprinted paper, such as forms and letterhead, verify that the ink on the paper is dry. During the fusing process, wet ink can come off preprinted paper, reducing print quality. 5.4 <Selecting and loading print media>
Loading paper 6 Load paper with the print side up. In the tray Load the print media you use for the majority of your print jobs in the tray. The tray can hold a maximum of 150 sheets of 75 g/m2 (20 lb bond) plain paper. Loading paper in the tray 1 2 Open the paper cover. Pull the tray out of the machine. Make sure not to overfill the tray and that all four corners are flat in the tray and under the brackets, as shown below. Overfilling the tray may cause a paper jam. 7 Squeeze the paper length guide and slide in it until it lightly touches the end of the paper stack. 3 Adjust the size of tray until it sound click. 4 Enlarge the tray by adjusting the paper width guide. 5 Flex the paper sheets back and forth to separate pages and then fan them while holding one edge. Tap the edges of the stack on a flat surface to even it up. 5.5 <Selecting and loading print media>
8 Close the paper cover. 9 Slide the tray back into the machine. Changing the size of the paper in the tray To load longer sizes of paper, such as Legal-sized paper, you need to adjust the paper guides to extend the paper tray. To change the tray size to other size, you must adjust the paper length guide properly. 1 Pull the tray out of the machine. Open the paper cover and remove paper from the tray if necessary. 2 Pressing and unlatching the guide lock in the top of the tray, pull the tray out manually. You can load letterhead with the design side face up. The top edge of the sheet with the logo should be go into the machine first. After loading paper, set the paper type and size for the tray. See page 5.8 for copying and faxing or the Software Section for PC-
printing. Note Due to insufficient paper in the tray, the paper length guide can be pushed to inside, load enough paper. If you experience problems with paper feed, place one sheet at a time in the manual feeder. You can load previously printed paper. The printed side should be facing down with an uncurled edge into the machine. If you experience problems with paper feed, turn the paper around. Note that print quality is not guaranteed. 3 Load paper into the tray. 4 Slide the paper length guide until it lightly touches the end of the paper stack. Squeeze the paper width guide and slide it to the edge of the paper stack without causing it to bend. 5.6 <Selecting and loading print media>
For paper smaller than Letter-sized, return the paper guides to their original positions and adjust the paper length guide and paper width guide. Note Do not push the paper width guides far enough to cause the material to warp. If you do not correctly adjust the paper width guides, it may cause a paper jams. 5 Close the paper cover. 6 Slide the tray back into the machine. In the manual feeder The manual feeder can hold special sizes and types of print material, such as transparencies, postcards, note cards, labels, and envelopes. It is useful for single page printing on letterhead or colored paper. Tips on using the manual feeder Load only one size of print media at a time in the manual feeder. When you print out many pieces of paper at once, tray use is recommended. To prevent paper jams, do not add paper when there is still paper in the manual feeder. This also applies to other types of print media. Print media should be loaded face up with the top edge going into the manual feeder first and be placed in the center of the tray. Always load only the print media specified in page 5.1 to avoid paper jams and print quality problems. Flatten any curl on postcards, envelopes, and labels before loading them into the manual feeder. To load paper in the manual feeder:
Caution When you do the printing job from the manual feeder, clear the paper in the tray away. 1 Load the paper with the side to be printed on facing up. Depending on the media type you are using, keep the following loading guidelines:
Envelopes: Flap side down and with the stamp area on the top left side. Transparencies: Print side up and the top with the adhesive strip entering the machine first. Labels: Print side up and top short edge entering the machine first. Preprinted paper: Design side up with the top edge toward the machine. Card stock: Print side up and the short edge entering the machine first. Previously printed paper: Previously printed side down with an uncurled edge toward the machine. 5.7 <Selecting and loading print media>
2 Squeeze the manual feeder paper width guides and adjust them to the width of the paper. Do not force too much, or the paper will be bent, which will result in a paper jam or skew. 3 After loading paper, set the paper type and size for the manual feeder. See page 5.8 for copying the Software Section for PC-printing. Note The settings made from the printer driver override the settings on the control panel. Caution If you want to print several pages with the manual feeder, wait the machine complete the printing one page, then place a paper on the manual feeder. Otherwise it may cause the paper jam. 2 3 4 5 6 7 8 9 Setting the paper size and type After loading paper in the paper tray, you need to set the paper size and type using the control panel buttons. These settings will apply to Copy. For PC-printing, you need to select the paper size and type in the application program you use on your PC. 1 Press Menu until Copy Menu appears on the bottom line of the display and press OK. Press the Scroll buttons until System Setup appears and press OK. Press the Scroll buttons until Paper Setup appears and press OK. Press OK when Paper Size appears. Press the Scroll buttons until the paper tray you want appears and press OK. Press the Scroll buttons until the paper size you are using appears and press OK. Press Back to return to the upper level. Press the Scroll buttons until Paper Type appears and press OK. Press the Scroll buttons until the paper type you are using appears and press OK. 10 Press Stop/Clear to return to Standby mode. 5.8 <Selecting and loading print media>
6 Copying This chapter gives you step-by-step instructions for copying documents. This chapter includes:
Selecting the paper tray
Copying
Changing the settings for each copy
Changing the default copy settings
Using special copy features Selecting the paper tray After loading the print media for copy output, you must select the paper tray you will use for copy jobs. 1 Press Menu until Copy Menu appears on the bottom line of the display and press OK. Press Scroll buttons until System Setup appears and press OK. Press Scroll buttons until Machine Setup appears and press OK. Press the Scroll buttons until Paper Setup appears and press OK. Press the Scroll buttons until Paper Source appears and press OK. Press OK when Copy Tray appears. Press the Scroll buttons until the paper tray you want appears and press OK. Press Stop/Clear to return to Standby mode. Copying Place an original document on the scanner glass. Customize the copy settings including copy size, darkness, and original type, by using the control panel Menu buttons. See 6.1. If necessary, you can use special copy features, such as Poster copying or 2 Up copying. See 6.3. Press Color Start to begin color copying. Or, press Black Start to begin black and white copying. Note You can cancel the copy job during an operation. Press Stop/
Clear, and the copying will stop. 2 3 4 5 6 7 8 1 2 Changing the settings for each copy The buttons on the control panel let you select all basic copy options:
darkness, document type and copy size. Set the following options for the current copy job before pressing Stop/Clear to make copies. Note If you press Stop/Clear while setting the copy options, all of the options you have set for the current copy job will be canceled and returned to their default status. Reduced/Enlarged copy You can reduce or enlarge the size of a copied image from 50% to 200%
when you copy original documents from the scanner lid. To select from the predefined copy sizes:
1 Press Menu until Copy Menu appears on the bottom line of the display and press OK. Press Scroll buttons until Copy Feature appears and press OK. Press Scroll buttons until Reduce/Enlarge appears and press OK. Press the Scroll buttons to select the size setting you want and press OK. 2 3 4 To fine-tune the size of copies:
1 Press Menu until Copy Menu appears on the bottom line of the display and press OK. Press Scroll buttons until Copy Feature appears and press OK. Press Scroll buttons until Reduce/Enlarge appears and press OK. Press the Scroll buttons until Custom:50-200% appears and press OK. Press the Scroll buttons to enter the copy size you want. Pressing and holding the button allows you to quickly scroll to the number you want. Press OK to save the selection. 2 3 4 5 6 Note When you make a reduced copy, black lines may appear at the bottom of your copy. Darkness If you have an original document containing faint markings and dark images, you can adjust the brightness to make a copy that is easier to read. 1 Press Menu until Copy Menu appears on the bottom line of the display and press OK. Press Scroll buttons until Copy Feature appears and press OK. Press Scroll buttons until Darkness appears and press OK. 2 3 6.1 <Copying>
Setting copy timeout You can set the time the machine waits before it restores the default copy settings, if you do not start copying after changing them on the control panel. 1 Press Menu until Copy Menu appears on the bottom line of the display and press OK. Press Scroll buttons until System Setup appears and press OK. Press Scroll buttons until Machine Setup appears and press OK. Press the Scroll buttons until Timeout appears and press OK. Press the Scroll buttons until the time setting you want appears. Selecting Off means that the machine does not restore the default settings until you press Black Start or Color Start to begin copying, or Stop/Clear to cancel. Press OK to save your selection. Press Stop/Clear to return to Standby mode. 2 3 4 5 6 7 4 5 Press the Scroll buttons to select the contrast mode you want. Light: works well with dark print. Normal: works well with standard typed or printed documents. Dark: works well with light print or faint pencil markings. Press OK to save the selection. Original type The original type setting is used to improve the copy quality by selecting the document type for the current copy job. 1 Press Menu until Copy Menu appears on the bottom line of the display and press OK. Press Scroll buttons until Copy Feature appears and press OK. Press Scroll buttons until Original Type appears and press OK. Press the Scroll buttons to select the image mode you want. Text: Use for documents containing mostly text. Text/Photo: Use for documents with mixed text and photographs. Photo: Use when the originals are photographs. Press OK to save the selection. 2 3 4 5 Changing the default copy settings The copy options, including darkness, original type, copy size, and number of copies, can be set to those most frequently used. When you copy a document, the default settings are used unless they have been changed by using the corresponding buttons on the control panel. 1 Press Menu until Copy Menu appears on the bottom line of the display and press OK. Press Scroll buttons until Copy Setup appears and press OK. Press OK when Change Default appears. Press the Scroll buttons until the setup option you want appears and press OK. Press the Scroll buttons until the setting you want appears and press OK. 2 3 4 5 6 Repeat steps 4 through 5, as needed. 7 Press Stop/Clear to return to Standby mode. Note While you are setting copy options, pressing Stop/Clear cancels the changed settings and restores the defaults. 6.2 <Copying>
ID card copying Using special copy features 2-up or 4-up copying Your machine can print 2-sided originals on one sheet of A4-, Letter-, Legal-, Folio-, Oficio-, Executive-, B5-, A5-, or A6-sized paper. When you copy using this feature, the machine prints one side of the original on the upper half of the paper and the other side on the lower half without reducing the size of the original. This feature is helpful for copying a small-sized item, such as a name card. This copy feature is available only when you place originals on the scanner glass. 1 2 Press ID Copy. Place a single original face down on the scanner glass. For details about loading an original, see page 5.1. Place Front page and Press[Start] appears on the display. Press OK, Color Start or Black Start. Your machine begins scanning the front side and shows Place Back Page and Press[Start]. 3 4 5 Open the scanner lid and turn the original over. Note If you press Stop/Clear or if no buttons are pressed for approximately 30 seconds, the machine cancels the copy job and returns to Standby mode. 6 Press Color Start to begin color copying. Or, press Black Start to begin black and white copying. Note If the original is larger than the printable area, some portions may not be printed. Your machine can print 2 or 4 original images reduced to fit onto one sheet of paper. 1 Place the document to be copied on the scanner glass, and close the scanner lid. For details about loading an original, see page 5.1. Note You cannot adjust the copy size using the Reduce/Enlarge button for making a 2- or 4-
up copy. 2 Press Menu until Copy Menu appears on the bottom line of the display and press OK. 3 Press Scroll buttons until Copy Feature appears and press OK. 4 Press the Scroll buttons until 2-Up or 4-Up appears and press OK. 5 Press the Scroll buttons to select the color mode you want. There are two types of mode as following:
Yes-Color: Color copy Yes-Mono: Black and White copy 6 Press OK to begin copying. 7 Your machine begins scanning the front side and will then display Another Page?. If an original is placed on the scanner glass, select Yes to add another pages. 8 Place the second document to be copied on the scanner glass. 9 Press OK to begin copying. Note 2- or 4-up copying reduces your original document by 50%. 2 1 2-up copying 1 3 2 4 4-up copying 6.3 <Copying>
Poster copying Your machine can print an image onto 9 sheets of paper (3x3). You can paste the printed pages together to make one poster-sized document. This copy feature is available only when you place originals on the scanner glass. 1 Place the document to be copied on the scanner glass, and close the scanner lid. For details about loading an original, see page 5.1. Press Menu until Copy Menu appears on the bottom line of the display and press OK. Press Scroll buttons until Copy Feature appears and press OK. Press the Scroll buttons until Poster Copy appears and press OK. Press the Scroll buttons to select the color mode you want. There are two types of mode as following:
Yes-Color: Color copy Yes-Mono: Black and White copy Press OK to begin copying. 2 3 4 5 6 Clone copying Your machine can print multiple image copies from the original document on a single page. The number of images is automatically determined by the original image and paper size. This copy feature is available only when you place originals on the scanner glass. 1 Place the document to be copied on the scanner glass, and close the scanner lid. For details about loading an original, see page 5.1. 2 Press Menu until Copy Menu appears on the bottom line of the display and press OK. 3 Press Scroll buttons until Copy Feature appears and press OK. 4 Press the Scroll buttons until Clone Copy appears and press OK. 5 Press the Scroll buttons to select the color mode you want. There are two types of mode as following:
Yes-Color: Color copy Yes-Mono: Black and White copy 6 Press OK to begin copying. Note You cannot adjust the copy size using the Reduce/Enlarge button while making a clone copy. Note You cannot adjust the copy size using the Reduce/Enlarge button when making a poster. Your original is divided into 9 portions. Each portion is scanned and printed one by one in the following order:
6.4 <Copying>
Erasing background images You can set the machine to print an image without its background. This copy feature removes the background color and can be helpful when copying an original containing color in the background, such as a newspaper or a catalog. This copy feature is only for mono copying. 1 Place the document to be copied on the scanner glass, and close the scanner lid. For details about loading an original, see page 5.1. Press Menu until Copy Menu appears on the bottom line of the display and press OK. Press Scroll buttons until Copy Feature appears and press OK. Press the Scroll buttons until Erase Bkgd. appears and press OK. Press the Scroll buttons to select On and press OK. Press Stop/Clear to return to Standby mode. 2 3 4 5 6 7 8 Enter the number of copies using the number keypad. Press Black Start to begin mono copying. 6.5 <Copying>
7 Basic printing This chapter explains common printing tasks. Printing a document Your machine allows you to print from various Windows, Macintosh, or Linux applications. The exact steps for printing a document may vary depending on the application you use. For details about printing, see the Software Section. Canceling a print job If the print job is waiting in a print queue or print spooler, such as the printer group in Windows, delete the job as follows:
1 Click the Windows Start menu. 2 For Windows 98/2000/Me, select Settings and then Printers. For Windows XP/2003, select Printers and Faxes. For Windows Vista, select Control Panel > Hardware and Sound
> Printers. 3 Double-click the Samsung CLX-216x Series icon. 4 From the Document menu, select Cancel Printing (Windows 98/
Me) or Cancel (Windows 2000/XP/2003/Vista). Note You can also access this window by simply double-clicking the printer icon at the bottom right corner of the Windows desktop. You can also cancel the current job by pressing Stop/Clear on the control panel. 7.1 <Basic printing>
8 Scanning Scanning with your machine lets you turn pictures and text into digital files that can be stored on your computer. Then you can email the files, upload them to your website, or use them to create projects that you can print. This chapter includes:
Scanning basics
Scanning to an application using a local connection
Scanning using a network connection
Changing the settings for each scan job
Changing the default scan settings Note The maximum resolution that can be achieved depends upon various factors, including computer speed, available disk space, memory, the size of the image being scanned, and bit depth settings. Thus, depending on your system and what you are scanning, you may not be able to scan at certain resolutions, especially using enhanced resolution. Scanning basics Your machine offers the following ways to scan an image using a local connection:
Via one of the preset imaging applications. Scanning an image launches the selected application, enabling you to control the scanning process. See the next section. Via the SmarThru program supplied with your machine. Scanning an image launches SmarThru and enables you to control the scanning process. Via the Windows Images Acquisition (WIA) driver. See the Software Section. To a portable USB memory device, if inserted into the USB memory port on your machine. See page 11.2. Also, you can send scanned images to several destinations using a network connection:
To your networked computer via the Network Scan program. You can scan an image from the machine, if network-connected, to the computer where the Network Scan program is running. Scanning to an application using a local connection 1 Make sure that your machine and computer are turned on and properly connected to each other. 2 3 4 5 Place a single original face down on the scanner glass. For details about loading an original, see page 5.1. Press Scan to. Ready to Scan appears on the top line of the display. Press the Scroll buttons until Scan to Appl. appears on the bottom line of the display and press OK. Press the Scroll buttons until the application you want to use appears and press OK. MS Paint: Sends the scanned image to Microsoft Paint. Email: Sends the scanned image to your default email program on your computer. A new message windows opens with the image attached. My Documents: Saves the scanned image in the default folder, My Documents, on your computer. SmarThru: Sends the scanned image to SmarThru, installed with the printer driver. OCR: Sends the scanned image to the OCR program for text recognition. Note You can add more TWAIN-compliant software for scanning, such as Adobe Photoshop Deluxe, or Adobe Photoshop, from the Printer Settings Utility. See the Software Section. 6 On the selected application, adjust the scan settings and begin scanning. For details, please refer to the application users guide. 8.1 <Scanning>
Scanning using a network connection If you have connected your machine to a network and set up network parameters correctly, you can scan and send images over the network. Preparing for network scanning Before using your machines network scanning features, you need to add the machine to the Network Scan program for scanning to a network client. Adding the machine to the Network Scan program First, install the Network Scan program. See the Software Section. To scan images from your machine to your computer through the network, you need to register the machine as an authorized network scanner in the Network Scan program. 1 In Windows, select Start Printer Utilities Network Scan. The Samsung Network Scan Manager window opens. Samsung Network Network Scan Programs 2 Click the Add Device button or double-click the Add Device icon. 3 Click Next. 4 Select Browse for a scanner. (recommended), or select Connect to this scanner. and enter the IP address of your machine. 5 Click Next. A list of the scanners on your network appears. 6 Select your machine from the list and enter a name, user ID, and PIN (Personal Identification Number) for the machine. Note For the scanner name, the model name of your machine is automatically entered, but can be changed. You can enter an ID of up to 8 characters. The first character must be a letter. The PIN must be 4 digits. 7 Click Next. 8 Click Finish. Your machine is added to the Network Scan program and you can now scan images through the network. Note You can change the scanner properties of your machine and the scan settings from the Samsung Network Scan Manager window. Click Properties and set the options in each tab. Scanning to a network client Network Scan allows you to remotely scan an original from your network-
connected machine to your computer in JPEG, TIFF, or PDF file format. Scanning 1 Make sure that your machine and the computer are connected to a network and Network Scan is running on the computer. 2 3 4 5 6 7 8 9 Place a single original face down on the scanner glass. For details about loading an original, see page 5.1. Press Scan to. Press the Scroll buttons until Network Scan appears on the bottom line of the display and press OK. Select the Scroll buttons until the ID you have set in the Samsung Network Scan Manager window and press OK. Enter the PIN you have set in the Samsung Network Scan Manager window and press OK. If the scan destination is your computer folders, press the Scroll buttons until My Documents appears on the bottom line of the display and press OK. Note If the scan destination is your computer application, press the Scroll buttons until the application you want appears and press Color Start or Black Start. Scanning is started. Press the Scroll buttons until the scan setting option you want appears and press OK. Or, press Color Start or Black Start to immediately start scanning using the default settings. Resolution: Sets the image resolution. Scan Color: Sets the color mode. Scan Format: Sets the file format in which the image is to be saved. When you select TIFF or PDF, you can select to scan multiple pages. Press the Scroll buttons until the desired status appears and press OK. 10 press Color Start or Black Start to start scanning. Your machine begins scanning the original to the computer where the program is running. 8.2 <Scanning>
Setting network scan timeout If the Network Scan program on your computer does not send a refresh request and does not scan a job within a specified timeout period, your machine cancels the scan job. You can change this timeout setting as needed. 1 Press Menu until Scan Menu appears on the bottom line of the display and press OK. Press the Scroll buttons until System Setup appears and press OK. Press OK when Machine Setup appears. Press the Scroll buttons until NetScanTimeout appears and press OK. Enter the desired timeout value and press OK. The change will be broadcast over the network and will apply to all clients connected to the network. Press Stop/Clear to return to Standby mode. 2 3 4 5 6 Changing the settings for each scan job Your machine provides you with the following setting options. Scan Size: Sets the image size. Original Type: Sets the original documents type. Resolution: Sets the image resolution. Scan Color: Sets the color mode. Scan Format: Sets the file format in which the image is to be saved. If you select TIFF or PDF, you can select to scan multiple pages. To customize the settings before starting a scan job:
1 Press Menu until Scan Menu appears on the bottom line of the display and press OK. Press the Scroll buttons until Scan Feature appears and press OK. Press OK when USB Memory appears. Press the Scroll buttons until the scan setting option you want appears and press OK. Press the Scroll buttons until the desired status appears and press OK. 2 3 4 5 6 Repeat steps 4 and 5 to set other setting options. 7 When you have finished, press Stop/Clear to return to Standby mode. Changing the default scan settings To avoid having to customize the scan settings for each job, you can set up default scan settings. 1 Press Menu until Scan Menu appears on the bottom line of the display and press OK. Press the Scroll buttons until Scan Setup appears and press OK. Press OK when Change Default appears. Press OK when USB Memory appears. Press the Scroll buttons until the scan setting option you want appears and press OK. Press the Scroll buttons until the desired status appears and press OK. 2 3 4 5 6 7 Repeat steps 5 and 6 to change other settings. 8 Press Stop/Clear to return to Standby mode. 8.3 <Scanning>
9 Using USB flash memory This chapter explains how to use a USB memory device with your machine. This chapter includes:
About USB memory
Plugging in a USB memory device
Scanning to a USB memory device
Printing from a USB memory device
Managing USB memory
Printing directly from a digital camera Plugging in a USB memory device The USB memory port on the front of your machine is designed for USB V1.1 and USB V2.0 memory devices. Your machine supports USB memory devices with FAT16/ FAT32 and sector size 512 Byte. Check your USB memory devices file system from your dealer. You must use only an authorized USB memory device with an A plug type connector. Use only a metal/shielded USB memory device. About USB memory Note There are two USB plug types. USB memory devices are available with a variety of memory capacities to give you more room for storing documents, presentations, downloaded music and videos, high resolution photographs, or whatever other files you want to store or move. You can do the following on your machine using a USB memory device:
Scan documents and save them on a USB memory device. Print data stored on a USB memory device. Restore backup files to the machines memory. Format the USB memory device. Check the available memory space. Insert a USB memory device into the USB memory port on the front of your machine. Caution Do not remove the USB memory device while the machine is in operation, or writing to or reading from USB memory. This may damage your machine. If your USB memory device has certain features, such as security settings and password settings, your machine may not automatically detect it. For details about these features, see the devices Users Guide. 9.1 <Using USB flash memory>
Scanning to a USB memory device You can scan a document and save the scanned image onto a USB memory device. There are two ways of doing this: you can scan to the device using the default settings, or you can customize your own scan settings. Scanning 1 Insert a USB memory device into the USB memory port on your machine. 2 5 3 4 Place a single original face down on the scanner glass. For details about loading an original, see page 5.1. Press Scan to. Press OK when Scan to USB appears on the bottom line of the display. Press OK, Color Start or Black Start when USB appears. Regardless of the button you press, the color mode is decided as customized. See Customizing Scan to USB on page 9.2. Your machine begins scanning the original, and then asks if you want to scan another page. Press OK when Yes appears to scan more pages. Load an original and press Color Start or Black Start. Regardless of the button you press, the color mode is decided as customized. See Customizing Scan to USB on page 9.2. Otherwise, press the Scroll buttons to select No and press OK. After scanning is complete, you can remove the USB memory device from the machine. 6 Customizing Scan to USB You can specify image size, file format, or color mode for each scanning to USB job. 1 2 Press Scan to. Press Menu until Scan Feature appears on the bottom line of the display and press OK. Press OK when USB Memory appears. Press the Scroll buttons until the setting option you want appears and press OK. You can set the following options:
Scan Size: Sets the image size. Original Type: Sets the original documents type. Resolution: Sets the image resolution. Scan Color: Sets the color mode. If you select Mono in this option, you can not select JPEG in Scan Format. 3 4 Scan Format: Sets the file format in which the image is to be saved. When you select TIFF or PDF, you can select to scan multiple pages. If you select JPEG in this option, you can not select Mono in Scan Color. Press the Scroll buttons until the desired status appears and press OK. 5 6 Repeat steps 4 and 5 to set other setting options. 7 When you have finished, press Stop/Clear to return to Standby mode. You can change the default scan settings. For details, see page 8.3. Printing from a USB memory device You can directly print files stored on a USB memory device. You can print TIFF, BMP, JPEG. Direct Print option supported file types:
BMP: BMP Uncompressed TIFF: TIFF 6.0 Baseline JPEG: JPEG Baseline To print a document from a USB memory device:
1 Insert a USB memory device into the USB memory port on your machine. If one has already been inserted, press USB Print. Your machine automatically detects the device and reads data stored on it. Press the Scroll buttons until the folder or file you want appears and press OK. If you see D in the front of a folder name, there are one or more files or folders in the selected folder. If you selected a file, skip to the next step. If you selected a folder, press the Scroll buttons until the file you want appears. Press the Scroll buttons to select the number of copies to be printed or enter the number. Press OK, Color Start or Black Start to start printing the selected file. There are two types of mode as following:
OK or Color Start: Color print Black Start: Black and White print After printing the file, the display asks if you want to print another job. Press OK when Yes appears to print another job, and repeat from step 2. Otherwise, press the Scroll buttons to select No and press OK. Press Stop/Clear to return to Standby mode. 2 3 4 5 6 7 9.2 <Using USB flash memory>
Managing USB memory You can delete image files stored on a USB memory device one by one or all at once by reformatting the device. Caution After deleting files or reformatting a USB memory device, files cannot be restored. Therefore, confirm that you no longer need the data before deleting it. Deleting an image file 1 Insert the USB memory device into the USB memory port on your machine. Press Scan to. Press OK when Scan to USB appears on the bottom line of the display. Press the Scroll buttons until File Manage appears and press OK. Press OK when Delete appears. Press the Scroll buttons until the folder or file you want appears and press OK. Note If you see D in the front of a folder name, there are one or more files or folders in the selected folder. If you selected a file, the display shows the size of the file for about 2 seconds. Go to the next step. If you selected a folder, press the Scroll buttons until the file you want to delete appears and press OK. Press OK when Yes appears to confirm your selection. Press Stop/Clear to return to Standby mode. Formatting a USB memory device 1 Insert the USB memory device into the USB memory port on your machine. Press Scan to. Press OK when Scan to USB appears on the bottom line of the display. Press the Scroll buttons until File Manage appears and press OK. Press the Scroll buttons until Format appears and press OK. Press OK when Yes appears to confirm your selection. Press Stop/Clear to return to Standby mode. 2 3 4 5 6 7 8 2 3 4 5 6 7 Viewing the USB memory status You can check the amount of memory space available for scanning and saving documents. 1 Insert the USB memory device into the USB memory port on your machine. Press Scan to. Press OK when Scan to USB appears on the bottom line of the display. Press the Scroll buttons until Check Space appears and press OK. The available memory space appears on the display. Press Stop/Clear to return to the Standby mode. 2 3 4 5 Printing directly from a digital camera This machine supports the PictBridge feature. You can print images directly from any PictBridge-compatible device, such as a digital camera, camera phone, and camcorder. You do not need to connect it to a computer. 1 2 Connect your PictBridge-compatible device to the memory port on Turn on the machine. the front of the machine using the USB cable supplied with the device. 3 Send an order to print images from the PictBridge-compatible device. 9.3 <Using USB flash memory>
10 Maintenance This chapter provides information for maintaining your machine and the toner cartridge. This chapter includes:
Printing reports
Clearing memory
Cleaning your machine
Maintaining the toner cartridge
Redistributing toner
Replacing the toner cartridge
Replacing the Imaging Unit
Replacing the Waste Toner Container
Maintenance Parts
Managing your machine from the website
Checking the machines serial number Printing reports Your machine can provide various reports with useful information you will need. The following reports are available:
Reports in the colored cells are only available with CLX-2160N. Report/List Configuration Supplies Info Network Info. NetScan Report Description This list shows the status of the user-selectable options. You may print this list to confirm your changes after changing settings. This list shows the current status of consumables in your machine. This list shows information on your machines network connection and configuration. his report shows information for the Network Scan records including IP address, time and date, the number of pages scanned, and results. Printing a report 1 Press Menu until Copy Menu appears on the bottom line of the display and press OK. Press the Scroll buttons until System Setup appears and press OK. Press the Scroll buttons until Report appears and press OK. Press the Scroll buttons until the report or list you want to print appears and press OK. To print all reports and lists, select All Report. Press OK when Yes appears to confirm printing. The selected information prints out. 2 3 4 5 Clearing memory You can selectively clear information stored in your machines memory. 1 Press Menu until Copy Menu appears on the bottom line of the display and press OK. Press the Scroll buttons until System Setup appears and press OK. Press the Scroll buttons until Clear Setting appears and press OK. Press the Scroll buttons until the item you want to clear appears. The options in the colored cells are available only with CLX-2160N. 2 3 4 Options All Settings Copy Setup Scan Setup System Setup Network NetScan Report Description Clears all of the data stored in memory and resets all of your settings to the factory default. Restores all of the copy options to the factory default. Restores all of the scan options to the factory default. Restores all of the system options to the factory default. Restores all of the network options to the factory default. Clears the information on network scan sessions in memory. Press OK when Yes appears. Press OK again to confirm clearing. 5 6 7 Repeat steps 5 through 7 to clear another item. 8 Press Stop/Clear to return to Standby mode. 10.1 <Maintenance>
Cleaning your machine 3 Extend the top handle on the imaging unit and then use it to pull the imaging unit out of the machine completely. To maintain print and scan quality, follow the cleaning procedures below each time the toner cartridge is replaced or if print and scan quality problems occur. Caution Cleaning the cabinet of the machine with cleaning materials containing large amounts of alcohol, solvent, or other strong substances can discolor or distort the cabinet. Cleaning the outside Clean the cabinet of the machine with a soft lint-free cloth. You can dampen the cloth slightly with water, but be careful not to let any water drip onto or into the machine. Cleaning the inside During the printing process, paper, toner, and dust particles can accumulate inside the machine. This buildup can cause print quality problems, such as toner specks or smearing. Cleaning the inside of the machine clears or reduces these problems. 1 Turn the machine off and unplug the power cord. Wait for the machine to cool down. 2 Open the front cover and pull the imaging unit out of the machine using the handle on its bottom. Cautions To prevent damage to the imaging unit, do not expose it to light for more than a few minutes. Cover it with a piece of paper, if necessary. Do not touch the green surface on the imaging unit with your hands or any other material. Use the handle on it to avoid touching this area. Be careful not to scratch the surface of the imaging unit. 4 With a dry lint-free cloth, wipe away any dust and spilled toner. Note After cleaning, let the printer to dry completely. 10.2 <Maintenance>
5 Pull the imaging unit about half and push it until it sounds click. Repeat this action two or three times. Cleaning the scan unit Keeping the scan unit clean helps ensure the best possible copies. We suggest that you clean the scan unit at the start of each day and during the day, as needed. 1 2 Open the scanner lid. 3 Wipe the surface of the scanner glass until it is clean and dry. Slightly dampen a soft lint-free cloth or paper towel with water. 6 Push the imaging unit until it sounds click in to the machine. 1 2 3 1 2 3 white sheet scanner lid scanner glass 4 Wipe the underside of the scanner lid and white sheet until it is clean and dry. 5 Close the scanner lid. 7 Close the front cover firmly. Caution If the front cover is not completely closed, the machine will not operate. 8 Plug in the power cord and turn the machine on. Caution If there is a cracking sound, re-install the imaging unit. The imaging unit is not properly installed. 10.3 <Maintenance>
Maintaining the toner cartridge 2 Pull the corresponding toner cartridge out. Toner cartridge storage To get the most from the toner cartridge, keep the following guidelines in mind:
Do not remove the toner cartridge from its package until ready for use. Do not refill the toner cartridge. The machine warranty does not cover damage caused by using a refilled cartridge. Store toner cartridges in the same environment as your machine. To prevent damage to the toner cartridge, do not expose it to light for more than a few minutes. Expected cartridge life The life of the toner cartridge depends on the amount of toner that print jobs require. The actual number may also be different depending on the print density of the pages you print on, and the number of pages may be affected by operating environment, printing interval, media type, and media size. If you print a lot of graphics, you may need to change the cartridge more often. Redistributing toner When the toner cartridge is near the end of its life:
White streaks or light printing occurs. The toner related message telling that the toner is low. SmartPanel program window appears on the computer telling you which color cartridge is low on toner. The Status LED blinks red. If this happens, you can temporarily reestablish print quality by redistributing the remaining toner in the cartridge. In some cases, white streaks or light printing will still occur even after you have redistributed the toner. 1 Open the front cover. 3 Holding the toner cartridge, thoroughly roll it 5 or 6 times to distribute the toner evenly inside the cartridge. Note If toner gets on your clothing, wipe it off with a dry cloth and wash clothing in cold water. Hot water sets toner into fabric. 4 Grasp the toner cartridge and align it with the corresponding slot inside the machine. Insert it back into its slot until it clicks into place. 5 Close the front cover. Make sure that the cover is securely closed. 10.4 <Maintenance>
Replacing the toner cartridge The machine uses four colors and has a different toner cartridge for each one: yellow (Y), magenta (M), cyan (C), and black (K). When the toner cartridge is completely empty:
The Status LED and the toner related message on the display indicate that the toner cartridge should be replaced with each individual toner cartridge according to its color. The machine stops printing. At this stage, the toner cartridge needs to be replaced. For order information for toner cartridges, see page 12.1. 1 Turn the machine off, then wait a few minutes for the machine to cool. 2 Open the front cover. 3 Pull the corresponding toner cartridge out. Note If toner gets on your clothing, wipe it off with a dry cloth and wash clothing in cold water. Hot water sets toner into fabric. 7 Grasp the toner cartridge and align it with the corresponding slot inside the machine. Insert it into its slot until it clicks into place. 8 Close the front cover. Make sure that the cover is securely latched and then turn the machine on. Caution If the front cover is not completely closed, the machine will not operate. Note If the installation is completed properly, a guide report is printed out automatically. Wait for about 1.5 minutes for the machine to get ready. Take a new toner cartridge out of its package. 4 5 Holding the toner cartridge, thoroughly roll it 5 or 6 times to distribute the toner evenly inside the cartridge. 6 Remove the cartridge cap. 10.5 <Maintenance>
Replacing the Imaging Unit 5 Extend the top handle on the imaging unit and then use it to pull the imaging unit out of the machine completely. The life of the imaging unit is approximately 20,000 pages for black or 50,000 image printing whichever comes first. When the life span of the imaging unit has expired, Replace Imaging Unit appears on the display of the control panel, indicating the imaging unit needs to be replaced. Otherwise your printer stops printing. To replace the imaging unit:
1 Turn the machine off, then wait a few minutes for the machine to cool. 2 Open the front cover. 3 Remove all of the toner cartridges and waste toner container from the machine. 4 Pull the imaging unit out of the machine using the handle on its bottom. 6 Take a new imaging unit out of its package. Remove the protective devices on both sides of the imaging unit and the paper protecting the surface of the imaging unit. Caution Dont use sharp objects, such as a knife or scissors, to open the imaging unit package. You could damage the surface of the imaging unit. Be careful not to scratch the surface of the imaging unit. To prevent damage, do not expose the imaging unit to light for more than a few minutes. Cover it with a piece of paper to protect it if necessary. 10.6 <Maintenance>
7 Holding the handles on the new imaging unit, push the imaging unit until it sounds click into the machine. 9 Insert the toner cartridges and waste toner container into their corresponding slots until they click into place. 8 Remove four dummy caps which are on the toner cartridge entrances of the imaging unit. When you remove the dummy cap from the cartridge, lift the handle up and pull it out. 10 Close the front cover firmly. Caution If the front cover is not completely closed, the machine will not operate. 11 Turn the machine on. Note After rebooting, your machine will automatically reset the counter for the imaging unit. If the installation is completed properly, a guide report is printed out automatically. Wait for about 1.5 minutes for the machine to get ready. Caution If there is a cracking sound, re-install the imaging unit. The imaging unit is not properly installed. Caution If you force too much to the dummy caps, it may cause problem. 10.7 <Maintenance>
Replacing the Waste Toner Container 6 Insert the new container into position and then push it to make sure that it is firmly seated in place. The life of the waste toner container unit is approximately 1,250 pages for full color 5% image printing or 5,000 images for black printing. When the life span of the waste toner container has expired, Replace/Install Waste Toner Tank appears on the display of the control panel, indicating the waste toner container needs to be replaced. Otherwise your printer stops printing. To replace the waste toner container:
1 Turn the machine off, then wait a few minutes for the machine to cool. 2 Open the front cover. 3 Pull the waste toner container out of the machine using its handle. Note Make sure that you lay the waste toner container on a flat surface so that the toner does not spill. 4 Remove the containers cap from the ontainer as shown below, and use it to close the waste toner container opening. Caution Do not tilt or turn over the container. 5 Take a new waste toner container out of its package. 7 Close the front cover firmly. Caution If the front cover is not completely closed, the machine will not operate. 8 Turn the machine on. Note After rebooting, your machine will automatically reset the counter for the waste toner container. 10.8 <Maintenance>
Maintenance Parts Managing your machine from the website To avoid print quality and paper feed problems resulting from worn parts and to maintain your machine in top working condition the following items will need to be replaced at the specified number of pages or when the life span of each item has expired. Items Yield (Average) Transfer belt Transfer roller Fuser unit Tray rubber pad Pickup roller Approx. 60,000 images Approx. 100,000 pages Approx. 100,000 black pages or 50,000 color pages Approx. 250,000 pages Approx. 50,000 pages Samsung highly recommends that an authorized service provider, dealer or the retailer where you bought printer performs this maintenance activity. Checking replaceables If you experience frequent paper jams or printing problems, check the number of pages the machine has printed or scanned. Replace the corresponding parts, if necessary. The following information are available for checking the replaceable elements of your machine:
Supplies Info: prints the supply information page. Total: displays the total number of pages printed. Platen Scan: displays the number of pages scanned using the scanner glass. Imaging Uint, Transfer Belt, Fuser, TransferRoller, Tray Roller:
displays the number of pages printed each item. To check the replaceables:
1 Press Menu until Copy Menu appears on the bottom line of the display and press OK. Press the Scroll buttons until System Setup appears and press OK. Press the Scroll buttons until Maintenance appears and press OK. Press the Scroll buttons until Supplies Life appears and press OK. Press the Scroll buttons until the item you want appears and press OK. If you selected to print a supply information page, press OK to confirm. Press Stop/Clear to return to Standby mode. 2 3 4 5 6 7 If you have connected your machine to a network and set up TCP/IP network parameters correctly, you can manage the machine via Samsungs SyncThru Web Service, an embedded web server. Use SyncThru Web Service to:
View the machines device information and check its current status. Change TCP/IP parameters and set up other network parameters. Change the printer properties. Set the machine to send email notifications to let you know the machines status. Get support for using the machine. To access SyncThru Web Service:
1 2 Start a web browser, such as Internet Explorer, from Windows. Enter the machine IP address (http://xxx.xxx.xxx.xxx) in the address field and press the Enter key or click Go. Your machines embedded website opens. Checking the machines serial number When you call for service or register as a user on the Samsung website, the machines serial number may be required. You can check the serial number by taking the following steps:
1 Press Menu until Copy Menu appears on the bottom line of the display and press OK. Press the Scroll buttons until System Setup appears and press OK. Press the Scroll buttons until Maintenance appears and press OK. Press the Scroll buttons until Serial Number appears and press OK. 2 3 4 5 Check your machines serial number. 6 Press Stop/Clear to return to Standby mode. 10.9 <Maintenance>
11 Troubleshooting This chapter gives helpful information for what to do if you encounter an error. This chapter includes:
Clearing paper jams
Understanding display messages
Solving other problems Tips for avoiding paper jams Tips for avoiding paper jams By selecting the correct media types, most paper jams can be avoided. When a paper jam occurs, follow the steps outlined on page 11.1. Follow the procedures on page 5.5. Ensure that the adjustable guides are positioned correctly. Do not overload the tray. Ensure that the paper level is under the brackets of the tray. Do not remove paper from the tray while your machine is printing. Flex, fan, and straighten paper before loading. Do not use creased, damp, or highly curled paper. Do not mix paper types in a tray. Use only recommended print media. See page 5.1. Ensure that the recommended print side of print media is facing up in the mamual tray and tray. Clearing paper jams When a paper jam occurs, Paper Jam appears on the display. Refer to the table below to locate and clear the paper jam. Message Location of jam Go to Paper Jam 0 Open/Close Door Paper Jam 1 Open/Close Door Paper Jam 2 Check Inside Manual Feeder Paper Jam 0 In the paper feed area page 11.1 In the paper exit area page 11.2 In the fuser area or around the toner cartridge page 11.3 In the paper feed area page 11.2 Caution To avoid tearing the paper, pull out the jammed paper gently and slowly. Follow the instructions in the following sections to clear the jam. In the tray 1 Open and close the front cover. The jammed paper is automatically ejected from the machine. If the paper does not exit, go to the next step. 2 Pull the tray out of the machine. 3 Remove the jammed paper by gently pulling it straight out. If the paper does not move when you pull, or if you do not see the paper in this area, check the paper exit area. See page 11.2. 4 Insert the tray into the machine until it snaps into place. Printing automatically resumes. 11.1 <Troubleshooting>
In the mamual feeder 1 2 Pull the tray out. Push the manual feeder tab down. In the paper exit area 1 Open and close the front cover. The jammed paper is automatically ejected from the machine. 2 Gently pull the paper out of the output tray. 3 Pull the Jammed paper out of the manual feeder. If you do not see the jammed paper or if there is any resistance when you pull, stop and go to the next step. 3 Lift the scan unit. 4 Insert the tray into the machine until it snaps into place. Printing automatically resumes. 4 Holding the inner cover open, carefully take the jammed paper out of the machine. 11.2 <Troubleshooting>
5 Holding down the scan unit gently and slowly until it is completely closed. The inner cover will be closed automatically by the scan unit closed. Be careful not to pinch your fingers!
If there is any resistance and the paper does not move when you pull or if you cannot see the paper under the scan unit, continue to the next step. 6 Open the rear cover. 7 If you see the jammed paper, pull it straight up. 8 Close the rear cover. Printing automatically resumes. Understanding display messages Messages appear on the control panel display to indicate the machines status or errors. Refer to the tables below to understand the messages meaning and correct the problem if necessary. Messages and their meanings are listed in alphabetical order. Note When you call for service, it is very convenient to tell the service representative the display message. Messages in the colored cells are available only with CLX-2160N. Message Toner Empty Toner Low TonerSupply Err. Data Read Fail Check USB Mem. Data Write Fail Check USB Mem. Door Open File Format Not Supported Fuser Fan Locked Meaning The color toner cartridge has run out. The machine stops printing. The arrow indicates which color toner cartridge. The corresponding color toner cartridge is almost empty. The arrow indicates which color toner cartridge. The machine received several papers with many images, and it can not supply the toner properly. The arrow indicates which color toner cartridge. Time expired while reading data. Storing to the USB memory failed. The front cover or rear cover is not securely latched. The selected file format is not supported. There is a problem in the cooling fan of the machine. Suggested solutions Replace the color toner cartridge with a new one. See page 10.5 Take out the toner cartridge and thoroughly shake it. By doing this, you can temporarily reestablish printing operations. Unplug the power cord and plug it back in. If the problem persists, please call for service. Try again. Check the available USB memory space. Close the cover until it locks into place. Use the correct file format. Open and then close the front cover. 11.3 <Troubleshooting>
Message Install Toner Install Imaging Unit Invalid Toner Invalid Imaging Unit Meaning The color toner cartridge is not installed. The arrow indicates which color toner cartridge. The corresponding Imaging Unit of the machine is not installed. The color toner cartridge you have installed is not for your machine. The arrow indicates which color toner cartridge. The Imaging Unit of the machine is not for your machine. Low Heat Error Cycle Power There is a problem in the fuser unit. LSU Hsync Error Cycle Power LSU Motor Error Cycle Power Main Motor Locked Manual Feeder Paper Empty Manual Feeder Paper Jam 0 Not Enough Space In USB Memory A problem has occurred in the LSU
(Laser Scanning Unit). A problem has occurred in the LSU
(Laser Scanning Unit). There is a problem in the main motor. There is no paper in the manual feeder. Paper has jammed in the feeding area of the manual feeder. The space for USB memory device is not enough, which is for scanning and saving. Suggested solutions Install the color toner cartridge. Message Meaning Open Heat Error Cycle Power There is a problem in the fuser unit. Install Imaging Unit into your machine. Install the a Samsung-genuine color toner cartridge designed for your machine. Install the a Samsung-genuine part designed for your machine. Unplug the power cord and plug it back in. If the problem persists, please call for service. Unplug the power cord and plug it back in. If the problem persists, please call for service. Unplug the power cord and plug it back in. If the problem persists, please call for service. Open and then close the front cover. Load paper in the manaul feeder. Clear the jam. See page 11.2. Check the available USB memory space. See page 9.3. Out-Bin Full Over Heat Error Cycle Power The output tray of the machine is full of paper. There is a problem in the fuser unit. Paper has jammed in the feeding area of the tray. Paper has jammed in the paper exit area. Paper has jammed In the fuser area or around the toner cartridge The paper size specified in the printer properties does not match the paper you are loading. The toner cartridge you have installed is not genuine or refilled. The arrow indicates which color toner cartridge. This message appears between Toner Empty and Toner Low status. The arrow indicates which color toner cartridge. The life of the part expires totally. Paper Jam 0 Open/Close Door Paper Jam 1 Open/Close Door Paper Jam 2 Check Inside Tray Paper Mismatch Refilled Toner Replace Toner Replace
[zzz]
* zzz indicates the part of the machine. 11.4 <Troubleshooting>
Suggested solutions Unplug the power cord and plug it back in. If the problem persists, please call for service. Remove paper. Unplug the power cord and plug it back in. If the problem persists, please call for service. Clear the jam. See page 11.1, 11.2. Clear the jam. See page 11.2. Clear the jam. See page 11.2. Load the correct paper in the tray 1. The print quality may get poor if the refilled toner cartridge is installed, since its characteristics may significantly differ from the genuine. We recommend Samsung-genuine color toner cartridge. Replace the toner cartridge with a new one. See page 10.5. Replace the part with a new one. Call for service. Message Meaning Replace
[zzz] Soon
* xxx indicates the part of the machine. Replace/Install Waste Toner Tank Scanner locked Transfer Belt Error The life of the part expires soon. The life span of the waste toner tank has expired and the printer will stop printing until a new waste toner tank is placed into the printer. The scanner module is locked A problem has occurred in the transfer belt in the machine. Tray Paper Empty There is no paper in the tray 1. Suggested solutions See page 10.9 and call for service. Solving other problems The following chart lists some conditions that may occur and the recommended solutions. Follow the suggested solutions until the problem is corrected. If the problem persists, please call for service. See page 10.8 Paper feeding problems Unlock the scanner and press Stop/
Clear. Unplug the power cord and plug it back in. If the problem persists, please call for service. Load paper in the tray 1. See page 5.5. Condition Paper is jammed during printing. Paper sticks together. Multiple sheets of paper do not feed. Paper does not feed into the machine. The paper keeps jamming. Suggested solutions Clear the paper jam. See page 11.1. Ensure that there is not too much paper in the tray. The tray can hold up to 150 sheets of paper, depending on the thickness of your paper. Make sure that you are using the correct type of paper. See page 5.3. Remove paper from the tray and flex or fan the Humid conditions may cause some paper to paper. stick together. Different types of paper may be stacked in the tray. Load paper of only one type, size, and weight. If multiple sheets have caused a paper jam, clear the paper jam. See page 11.1. Remove any obstructions from inside the machine. Paper has not been loaded correctly. Remove paper from the tray and reload it correctly. There is too much paper in the tray. Remove excess paper from the tray. The paper is too thick. Use only paper that meets the specifications required by the machine. See page 5.1. There is too much paper in the tray. Remove excess paper from the tray. If you are printing on special materials, use the mamual tray. An incorrect type of paper is being used. Use only paper that meets the specifications required by the machine. See page 5.1. There may be debris inside the machine. Open the front cover and remove the debris. Transparencies stick together in the paper exit. Envelopes skew or fail to feed correctly. Use only transparencies specifically designed for laser printers. Remove each transparency as it exits from the machine. Ensure that the paper guides are against both sides of the envelopes. 11.5 <Troubleshooting>
Condition The machine selects print materials from the wrong paper source. A print job is extremely slow. Possible cause The paper source selection in the printer properties may be incorrect. The job may be very complex. If you are using Windows 9x/Me, the Spool Setting may be set incorrectly. Half the page is blank. The page orientation setting may be incorrect. The paper size and the paper size settings do not match. Suggested solutions For many software applications, the paper source selection is found under the Paper tab within the printer properties. Select the correct paper source. See the printer driver help screen. Reduce the complexity of the page or try adjusting the print quality settings. From the Start menu, choose Settings and then Printers. Right-click the Samsung CLX-216x Series machine icon, choose Properties, click the Details tab, and then choose the Spool Settings button. Select the desired spool setting. Change the page orientation in your application. See the printer driver help screen. Ensure that the paper size in the printer driver settings matches the paper in the tray. Or, ensure that the paper size in the printer driver settings matches the paper selection in the software application settings you use. Printing problems Possible cause The machine is not receiving power. Condition The machine does not print. Suggested solutions Check the power cord connections. Check the power switch and the power source. Select Samsung CLX-216x Series as your default printer in your Windows. The machine is not selected as the default printer. Check the machine for the following:
The front cover is not closed. Close the cover. Paper is jammed. Clear the paper jam. See 11.1. No paper is loaded. Load paper. See 5.5. The toner cartridge is not installed. Install the toner cartridge. Disconnect the printer cable and reconnect it. If a system error occurs, contact your service representative. The connection cable between the computer and the machine is not connected properly. The connection cable between the computer and the machine is defective. If possible, attach the cable to another computer that is working properly and print a job. You can also try using a different printer cable. Check the Windows printer setting to make sure that the print job is sent to the correct port. If the computer has more than one port, make sure that the machine is attached to the correct one. The port setting is incorrect. The machine may be configured incorrectly. The printer driver may be incorrectly installed. The machine is malfunctioning. The document size is so big that the hard disk space of the computer is not enough to access the print job. Check the printer properties to ensure that all of the print settings are correct. Repair the printer software. See the Software Section. Check the display message on the control panel to see if the machine is indicating a system error. Get more hard disk space and print the document again. 11.6 <Troubleshooting>
Possible cause The printer cable is loose or defective. Condition The machine prints, but the text is wrong, garbled, or incomplete. The wrong printer driver was selected. The software application is malfunctioning. The operating system is malfunctioning. The toner cartridge is defective or out of toner. The file may have blank pages. Some parts, such as the controller or the board, may be defective. The setting in the software application is wrong. Incompatibility between the PDF file and the Acrobat products Pages print, but are blank. The illustrations print incorrectly in Adobe Illustrator. The printer does not print PDF file correctly. Some parts of graphics, text, or illustrations are missing. Suggested solutions Disconnect the printer cable and reconnect. Try a print job that you have already printed successfully. If possible, attach the cable and the machine to another computer and try a print job that you know works. Finally, try a new printer cable. Check the applications printer selection menu to ensure that your machine is selected. Try printing a job from another application. Exit Windows and reboot the computer. Turn the machine off and then back on again. Redistribute the toner, if necessary. See page 10.4. If necessary, replace the toner cartridge. Check the file to ensure that it does not contain blank pages. Contact a service representative. Select Download as Bit Image in the TrueType Options window of the graphic properties and print the document again. Printing the PDF file as an image may solve this problem. Turn on Print As Image from the Acrobat printing options. Note: It will take longer to print when you print a PDF file as an image. Printing quality problems If the inside of the machine is dirty or paper has been loaded improperly, you may notice a reduction in print quality. See the table below to clear the problem. Suggested solutions If a vertical white streak or faded area appears on the page:
The toner supply is low. You may be able to temporarily extend the toner cartridge life. See page 10.4. If this does not improve the print quality, install a new toner cartridge. The paper may not meet paper specifications; for example, the paper is too moist or too rough. See page 5.1. If the entire page is light, the print resolution setting is too low. Adjust the print resolution. See the help screen of the printer driver. A combination of faded or smeared defects may indicate that the toner cartridge needs cleaning. The surface of the LSU part inside the machine may be dirty. Clean the LSU. See page 10.2. The paper may not meet specifications; for example, the paper is too moist or too rough. See page 5.1. The transfer roller may be dirty. Clean the inside of your machine. See page 10.2. The paper path may need cleaning. See page 10.2. If faded areas, generally rounded, occur randomly on the page:
A single sheet of paper may be defective. Try reprinting the job. The moisture content of the paper is uneven or the paper has moist spots on its surface. Try a different brand of paper. See page 5.1. The paper lot is bad. The manufacturing processes can cause some areas to reject toner. Try a different kind or brand of paper. Change the printer option and try again. Go to printer properties, click Paper tab, and set type to Thick. Refer to the Software Section for details. If these steps do not correct the problem, contact a service representative. Condition Light or faded print Toner specks AaBbCc AaBbCc AaBbCc AaBbCc AaBbCc Dropouts AaBbCc AaBbCc AaBbCc AaBbCc AaBbCc 11.7 <Troubleshooting>
Condition White Spots Vertical lines Color or Black background Toner smear Suggested solutions White spots appears on the page:
The paper is too rough and a lot of dirt from a paper falls to the inner devices within the machine, so the transfer roller may be dirty. Clean the inside of your machine. See page 10.2. Contact a service representative. The paper path may need cleaning. Contact a service representative. If black vertical streaks appear on the page:
The drum inside the toner cartridge has probably been scratched. Remove the toner cartridge and install a new one. See page 10.5. If white vertical streaks appear on the page:
The surface of the LSU part inside the machine may be dirty. Clean the LSU. See page 10.2. If the amount of background shading becomes unacceptable:
Change to a lighter weight paper. See page Check the machines environment: very dry
(low humidity) or high humidity (higher than 80% RH) conditions can increase the amount of background shading. Remove the old toner cartridge and install a new one. See page 10.5. Clean the inside of the machine. See page Check the paper type and quality. See page 5.1. 10.2. 5.1. Remove the toner cartridge and install a new one. See page 10.5. Suggested solutions If marks repeatedly appear on the printed side of the page at even intervals:
The toner cartridge may be damaged. If a repetitive mark occurs on the page, print a cleaning sheet several times to clean the cartridge; see page 10.4. After the printout, if you still have the same problems, remove the toner cartridge and install a new one. See page 10.5. Parts of the machine may have toner on them. If the defects occur on the back of the page, the problem will likely correct itself after a few more pages. The fusing assembly may be damaged. Contact a service representative. Background scatter results from bits of toner randomly distributed on the printed page. The paper may be too damp. Try printing with a different batch of paper. Do not open packages of paper until necessary so that the paper does not absorb too much moisture. If background scatter occurs on an envelope, change the printing layout to avoid printing over areas that have overlapping seams on the reverse side. Printing on seams can cause problems. If background scatter covers the entire surface area of a printed page, adjust the print resolution through your software application or the printer properties. If characters are improperly formed and producing hollow images, the paper stock may be too slick. Try a different paper. See page 5.1. If characters are improperly formed and producing a wavy effect, the scanner unit may need service. For service, contact a service representative. Ensure that the paper is loaded properly. Check the paper type and quality. See page 5.1. Ensure that the paper or other material is loaded correctly and the guides are not too tight or too loose against the paper stack. Condition Vertical repetitive defects A a B b C c A a B b C c A a B b C c A a B b C c A a B b C c Background scatter A Misformed characters Page skew AaBbCc AaBbCc AaBbCc AaBbCc AaBbCc 11.8 <Troubleshooting>
Condition Curl or wave Wrinkles or creases Suggested solutions Ensure that the paper is loaded properly. Check the paper type and quality. Both high temperature and humidity can cause paper curl. See page 5.1. Turn over the stack of paper in the tray. Also try rotating the paper 180 in the tray. Ensure that the paper is loaded properly. Check the paper type and quality. See page 5.1. Turn over the stack of paper in the tray. Also try rotating the paper 180 in the tray. Back of printouts are dirty Check for leaking toner. Clean the inside of the machine. See page 10.2. Solid Color or Black pages A Loose toner The toner cartridge may not be installed properly. Remove the cartridge and reinsert it. The toner cartridge may be defective and need replacing. Remove the toner cartridge and install a new one. See page 10.5. The machine may require repair. Contact a service representative. Clean the inside of the machine. See page Check the paper type and quality. See page 10.2. 5.1. Remove the toner cartridge and install a new one. See page 10.5. If the problem persists, the machine may require repair. Contact a service representative. Condition Character Voids A Horizontal stripes AaBbCc AaBbCc AaBbCc AaBbCc AaBbCc Curl Suggested solutions Character voids are white areas within parts of characters that should be solid black:
If you are using transparencies, try another type of transparency. Because of the composition of transparencies, some character voids are normal. You may be printing on the wrong surface of the paper. Remove the paper and turn it around. The paper may not meet paper specifications. See page 5.1. If horizontally aligned black streaks or smears appear:
The toner cartridge may be installed improperly. Remove the cartridge and reinsert it. The toner cartridge may be defective. Remove the toner cartridge and install a new one. See page 10.5. If the problem persists, the machine may require repair. Contact a service representative. If the printed paper is curled or paper does not feed into the machine:
Turn over the stack of paper in the tray. Also try rotating the paper 180 in the tray. Change the printer option and try again. Go to printer properties, click Paper tab, and set type to Thin. Refer to the Software Section for details. An unknown image repetitively appears on a next few sheets or loose toner, light print, or contamination occurs. Your printer is probably being used at an altitude of 2,500 m (8,200 ft) or above. The high altitude may affect the print quality such as loose toner or light imaging. You can set this option through Printer Settings Utility or Printer tab in printer drivers properties. Refer to the Software Section for details. 11.9 <Troubleshooting>
Copying problems Scanning problems Suggested solutions Use Light and Dark arrows to darken or lighten the backgrounds of copies. Condition The scanner does not work. If the defects are on the original, press Light and Dark arrows to lighten the background of your copies. If no defects are on the original, clean the scan unit. See page 10.3. Condition Copies are too light or too dark. Smears, lines, marks, or spots appears on copies. Copy image is skewed. Blank copies print out. Image rubs off the copy easily. Frequent copy paper jams occur. Toner cartridge produces fewer copies than expected before running out of toner. Ensure that the original is face down on the Check that the copy paper is loaded scanner glass. correctly. Ensure that the original is face down on the scanner glass. Replace the paper in the tray with paper from a new package. In high humidity areas, do not leave paper in the machine for extended periods of time. Fan the stack of paper, then turn it over in the tray. Replace the paper in the tray with a fresh supply. Check/adjust the paper guides, if necessary. Ensure that the paper is the proper paper weight. 75 g/m2 (20 lb bond) paper is recommended. Check for copy paper or pieces of copy paper remaining in the machine after a paper jam has been cleared. Your originals may contain pictures, solids, or heavy lines. For example, your originals may be forms, newsletters, books, or other documents that use more toner. The machine may be turned on and off frequently. The scanner lid may be left open while copies are being made. Suggested solutions Make sure that you place the original to be scanned face down on the scanner glass. There may not be enough available memory to hold the document you want to scan. Try the prescan function to see if that works. Try lowering the scan resolution rate. Check that the USB cable is connected properly. Make sure that the USB cable is not defective. Switch the cable with a known good cable. If necessary, replace the cable. Check that the scanner is configured correctly. Check scan setting in the SmarThru Configuration or the application you want to use to make certain that the scanner job is being sent to the correct port. The unit scans very slowly. Check if the machine is printing received data. If so, scan the document after the received data has been printed. Graphics are scanned more slowly than text. Communication speed slows in scan mode because of the large amount of memory required to analyze and reproduce the scanned image. Set your computer to the ECP printer mode through BIOS setting. It will help to increase the speed. For details about how to set BIOS, refer to your computer users guide. There may be a copying or printing job in progress. When that job is complete, try your job again. The Selected port is currently being used. Restart your computer and try again. The printer cable may be improperly connected or the power may be off. The scanner driver is not installed or the operating environment is not set up properly. Ensure that the machine is properly connected and the power is on, Then restart your computer. The USB cable may be improperly connected or the power may be off. Message appears on your computer screen:
Device can't be set to the H/W mode you want. Port is being used by another program. Port is Disabled. Scanner is busy receiving or printing data. When the current job is completed, try again. Invalid handle. Scanning has failed. 11.10 <Troubleshooting>
Network Scan problems (CLX-2160N only) Common Macintosh problems Suggested solutions Condition Suggested solutions Condition I cannot find a scanned image file. I cannot find the scanned image file after scanning. I forgot my ID and PIN. I cannot view the Help file. I cannot use the Samsung Network Scan Manager. You can check the scanned files destination in the Advanced page in the Network Scan programs Properties screen. Check if the scanned files application is on your computer. Check Open immediately with the default application in the Advanced page in the Network Scan programs Properties screen to open the scanned image immediately after scanning. Check your ID and PIN in the Server page in the Network Scan programs Properties screen. To view the Help file, you need to have Internet Explorer 4 service pack 2 or above. Check your operating system. Supporting operating systems are Windows 98/Me/2000/XP/
2003/vista. Common Windows problems Condition File in Use message appears during installation. General Protection Fault, Exception OE, Spool32, or Illegal Operation messages appear. Fail To Print, A printer timeout error occurred. messages appear. Suggested solutions Exit all software applications. Remove all software from the StartUp Group, then restart Windows. Reinstall the printer driver. Close all other applications, reboot Windows and try printing again. These messages may appear during printing. Just keep waiting until the machine finishes printing. If the message appears in standby mode or after printing has been completed, check the connection and/or whether an error has occurred. Note Refer to Microsoft Windows 98/Me/2000/XP/2003/Vista Users Guide that came with your PC for further information on Windows error messages. The printer does not print PDF file correctly. Some parts of graphics, text, or illustrations are missing. The document has printed, but the print job has not disappeared from the spooler in Mac OS 10.3.2. Some letters are not displayed normally during the cover sheet printing. Incompatibility between the PDF file and the Acrobat products:
Printing the PDF file as an image may solve this problem. Turn on Print As Image from the Acrobat printing options. Note: It will take longer to print when you print a PDF file as an image. Update your Mac OS to OS 10.3.3. or higher. This problem is caused because Mac OS cannot find the font during the cover page printing. Alphanumeric characters, in the Billing Info field, are only allowed for printing on the cover page. Other characters will be broken on the printout. 11.11 <Troubleshooting>
Common Linux problems Problem Possible cause and solutions The machine does not print. Check if the printer driver is installed in your system. Open Unified Driver configurator and switch to the Printers tab in Printers configuration window to look at the list of available printers. Make sure that your machine is displayed on the list. If not, please, invoke Add new printer wizard to set up your device. Check if the printer has started. Open Printers configuration and select your machine on the printers list. Look at the description in the Selected printer pane. If its status contains (stopped) string, please, press the Start button. After that normal operation of the printer should be restored. The stopped status might be activated when some problems in printing occurred. For instance, this could be an attempt to print a document when a port is claimed by a scanning application. Check if the port is not busy. Since functional components of MFP (printer and scanner) share the same I/O interface (port), the situation of simultaneous access of different consumer applications to the same port are possible. To avoid possible conflicts, only one of them at a time is allowed to gain control over the device. The other consumer will encounter device busy response. You should open ports configuration and select the port assigned to your printer. In the Selected port pane you can see if the port is occupied by some other application. If this is the case, you should wait for completion of the current job or should press Release port button, if you are sure that the present owner is not functioning properly. Check if your application has special print option such as -oraw. If -oraw is specified in the command line parameter then remove it to print properly. For Gimp front-end, select print -> Setup printer and edit command line parameter in the command item. Problem Possible cause and solutions Some color images come out all black. The machine does not print whole pages and its output is half page printed. Some color images come out in unexpected color. This is a known bug in Ghostscript (until GNU Ghostscript version 7.05) when the base color space of the document is indexed color space and it is converted through CIE color space. Because Postscript uses CIE color space for Color Matching System, you should upgrade Ghostscript on your system to at least GNU Ghostscript version 7.06 or later. You can find recent Ghostscript versions at www.ghostscript.com. It is a known problem that occurs when a color printer is used on version 8.51 or earlier of Ghostscript, 64-bit Linux OS, and reported to bugs.ghostscript.com as Ghostscript Bug 688252. The problem is solved in AFPL Ghostscript v. 8.52 or above. Download the latest version of AFPL Ghostscript from http://
sourceforge.net/projects/ghostscript/ and install it to solve this problem. This is a known bug in Ghostscript (until GNU Ghostscript version 7.xx) when the base color space of the document is indexed RGB color space and it is converted through CIE color space. Because Postscript uses CIE color space for Color Matching System, you should upgrade Ghostscript on your system to at least GNU Ghostscript version 8.xx or later. You can find recent Ghostscript versions at www.ghostscript.com. 11.12 <Troubleshooting>
Problem Possible cause and solutions Problem Possible cause and solutions The machine does not appear on the scanners list. Check if your machine is attached to your computer. Make sure that it is connected properly via the USB port and is turned on. Check if the scanner driver for your machine is installed in your system. Open Unified Driver configurator, switch to Scanners configuration, then press Drivers. Make sure that driver with a name corresponding to your machine's name is listed in the window. Check if the port is not busy. Since functional components of MFP (printer and scanner) share the same I/O interface
(port), the situation of simultaneous access of different consumer application to the same port is possible. To avoid possible conflicts, only one of them at a time is allowed to gain control over the device. The other consumer will encounter device busy response. This can usually happen while starting scan procedure, and appropriate message box appears. To identify the source of the problem, you should open ports configuration and select the port assigned to your scanner. port's symbol /dev/mfp0 corresponds to LP:0 designation displayed in the scanners options, /dev/mfp1 relates to LP:1 and so on. USB ports start at /dev/
mfp4, so scanner on USB:0 relates to /
dev/mfp4 respectively and so forth sequentially. In the Selected port pane you can see if the port is occupied by some other application. If this is the case, you should wait for completion of the current job or you should press Release port button, if you are sure that the present port's owner is not functioning properly. The machine does not scan. I cannot scan via Gimp Front-end. 11.13 <Troubleshooting>
Check if a document is loaded into the machine. Check if your machine is connected to the computer. Make sure if it is connected properly if an I/O error is reported while scanning. Check if the port is not busy. Since functional components of MFP (printer and scanner) share the same I/O interface (port), the situation of simultaneous access of different consumer application to the same port is possible. To avoid possible conflicts, only one of them at a time is allowed to gain control over the device. The other consumer will encounter device busy response. This can usually happen while starting scan procedure, and appropriate message box will be displayed. To identify the source of the problem, you should open ports configuration and select the port assigned to your scanner. ports symbol /dev/mfp0 corresponds to LP:0 designation displayed in the scanners options, /dev/mfp1 relates to LP:1 and so on. USB ports start at /dev/
mfp4, so scanner on USB:0 relates to /
dev/mfp4 respectively and so forth sequentially. In the Selected port pane you can see if the port is occupied by some other application. If this is the case, you should wait for completion of the current job or should press the Release port button, if you are sure that the present ports owner is not functioning properly. Check if Gimp Front-end has Xsane: Device dialog. on the Acquire menu. If not, you should install Xsane plug-in for Gimp on the your computer. You can find Xsane plug-in package for Gimp on Linux distribution CD or Gimp home page. For the detail information, refer to the Help for Linux distribution CD or Gimp Front-end application. If you wish to use other kind of scan application, refer to the Help for application. Problem Possible cause and solutions I encounter error Cannot open port device file when printing a document. When printing a document over the network in SuSE 9.2, the machine does not print. Please avoid changing the print job parameters (via LPR GUI, for example) while a print job is in progress. Known versions of CUPS server break the print job whenever print options are changed and then try to restart the job from the beginning. Since Unified Linux Driver locks port while printing, the abrupt termination of the driver keeps the port locked and therefore unavailable for subsequent print jobs. If this situation occurred, please, try to release the port. The CUPS (Common Unix Printing System) version distributed with SuSE Linux 9.2
(cups-1.1.21) has a problem with ipp
(Internet Printing Protocol) printing. Use the socket printing instead of ipp or install later version of CUPS (cups-1.1.22 or higher). 11.14 <Troubleshooting>
How to purchase To order Samsung-authorized supplies, contact your local Samsung dealer or the retailer where you purchased your machine, or visit www.samsungprinter.com and select your country/region for information on calling for technical support. 12 Ordering supplies This chapter provides information on purchasing supplies for your machine.
Supplies
How to purchase Supplies When the toner runs out or, the life span of the supplies expires you can order the following types of toner cartridges and supplies for your machine:
Type Yielda Part number Black toner cartridge Cyan toner cartridge Magenta toner cartridge Yellow toner cartridge Imaging unit Waste toner container Approx. 2,000 pages Approx. 1,000 pages Approx. 1,000 pages Approx. 1,000 pages Approx. 20,000 black pages or 50,000 images Approx. 5,000 imagesb
(1,250 color pages) CLP-K300A CLP-C300A CLP-M300A CLP-Y300A CLP-R300A CLP-W300A a. Average A4-/letter sized page count based on 5% coverage of indivisual colors on each page. Usage conditions and print patterns may cause results to vary. b. Image counts based on one color on each page. If you print documents in full color(Cyan, Magenta, Yellow, Black), the life of this item will be reduced by 25%. 12.1 <Ordering supplies>
13 Specifications This chapter includes:
General specifications
Printer specifications
Scanner and copier specifications General specifications Item Description Paper input capacity Paper output capacity Power rating Power consumption Noise levela Warm-up time Operating environment Display Toner cartridge lifeb Tray 150 multi-pages for plain paper 75 g/m2 (20 lb bond) Manual feeder 1 page for plain paper 75 g/m2 (20 lb bond) For details about paper input capacity, see 5.5 page Face down: 100 sheets 75 g/m2 (20 lb bond) AC 110 - 127 V or AC 220 - 240 V See the Rating label on the machine for the correct voltage, frequency (hertz) and type of current for your machine. Average: 350 W Power save mode: Less than 30 W Standby mode: Less than 35 dBA Printing: Less than 49 dBA Copying mode: Less than 52 dBA Less than 35 seconds (from sleep mode) Temperature: 10 C to 32.5 C (59 F to 90.5 F) Humidity: 30% to 80% RH 16 characters x 2 lines Black Color 2,000 pages at 5% Coverage
(Shipped with 1,500 pages Starter toner cartridge) 1,000 pages at 5% coverage
(Shipped with 700 pages Starter toner cartridge) Item Description Weight Package weight Duty cycle Fusing temperature 20.5 Kg (45.2 lbs) (including consumables) Paper: 3.3 Kg, Plastic: 0.6 Kg Monthly print: Up to 24,200 imagesc 180 C (356 F) a. Sound Pressure Level, ISO 7779 b. The number of pages may be affected by operating environment, printing interval, media type, and media size. c. Image counts based on one color on each page. If you print documents in full color(Cyan, Magenta, Yellow, Black), the life of this item will be reduced by 25%. Printer specifications Description Laser Beam Printing Black &
White Color Up to 16 ppm in A4 (17 ppm in Letter) Up to 4 ppm in A4 or Letter From ready: Less than 14 seconds From coldboot: Less than 45 seconds From ready: Less than 26 seconds From coldboot: Less than 57 seconds Black &
White Color Up to 2,400 x 600 dpi effective output SPL-C (Samsung Printer Language Color) Windows 98/Me/2000/XP/2003/Vista Various Linux OS (USB only) Macintosh 10.3 ~ 10.4 High Speed USB 2.0 Ethernet 10/100 Base TX (Embedded type) Item Printing method Printing speeda First print out time Print resolution Printer language OS Compatibilityb Interface a. Print speed will be affected by operating system used, computing perfor-
mance, application software, connecting method, media type, media size, and job complexity. b. Please visit www.samsungprinter.com to download the latest software ver-
sion. Memory External dimension
(W x D x H) 128 MB (Non extendable) 413.06 x 353.2 x 333.4 mm
(16.26 x 13.9 x 13.12 inches) 13.1 <Specifications>
Scanner and copier specifications Item Compatibility Scanning method Resolution Effective scanning length Effective scanning width Color bit depth Mono bit depth Copy speeda Copy resolution Description TWAIN standard / WIA standard Color CIS Optical: Up to 600 x 1200 dpi (mono and color) Enhanced: 4,800 x 4,800 dpi Max. 216 mm (8.5 inches) Max. 208 mm (8.2 inches) 24 bits 1 bit for Black & White mode 8 bits for Gray mode Black &
white Color Up to 16 ppm in A4
(17 ppm in Letter) Up to 4 cpm in A4 or Letter Text: Up to 600 x 300 dpi Text/photo: Up to 600 x 300 dpi Photo: Up to 600 x 600 dpi for platen Zoom rate Multiple copies Grayscale 50 to 200% for platenS 1 to 99 pages 256 levels a. Copy Speed is based on Single Document Multiple Copy. 13.2 <Specifications>
INDEX Numerics 2/4-up, special copy 6.3 B Back 1.3 background image, erase 6.5 Black Start 1.3 C cleaning inside 10.2 outside 10.2 scan unit 10.3 clone, special copy 6.4 Color Start 1.3 contrast, copy 6.1 copying 2/4-up 6.3 darkness 6.1 default setting, change 6.2 erasing background 6.5 ID card copy 6.3 original type 6.2 poster 6.4 reduce/enlarge 6.1 time out, set 6.2 D Display 1.3 display language, change 2.2 E Erasing background, special copy 6.5 error messages 11.3 I ID card, special copy 6.3 ID copy 1.3 J jam, clear paper 11.1 L Linux problems 11.12 loading paper manual feeder 5.7 tray 1 5.5 M Macintosh problems 11.11 manual feeder 5.7 memory, clear 10.1 Menu 1.3 N network scan scanning 8.2 timeout, set 8.3 Network Scan program adding scanners 8.2 problems 11.11 network setup operating systems 4.1 TCP/IP 4.1 n-up (multiple pages per sheet) copying 6.3 paper load manual feeder 5.7 tray 1/optional tray 2 5.5 paper size setting 5.8 specifications 5.2 paper tray, set copy 6.1 paper type setting 5.8 specifications 5.2 poster, special copy 6.4 print quality problems, solve 11.7 printing reports 10.1 USB memory 9.2 problem, solve copying 11.10 error messages 11.3 Linux 11.12 Macintosh 11.11 Network Scan 11.11 paper feeding 11.5 printing 11.6 printing quality 11.7 scanning 11.10 Windows 11.11 R replacement parts 10.9 replacing imaging unit 10.6 toner cartridge 10.5 waste toner container 10.8 reports, print 10.1 P paper guidelines 5.3 paper jam, clear manual feeder 11.2 paper exit area 11.2 tray 1 11.1 1 S scan power save mode 2.2 Scan to 1.3 scanner glass cleaning 10.3 scanning default setting, change 8.3 scan settings 8.3 to application 8.1 to network computer 8.2 USB flash memory 9.2 special copy features 6.3 special print media, guidelines 5.3 specifications facsimile 13.2 general 13.1 printer 13.1 scanner and copier 13.2 Status 1.3 Status LED 1.4 Stop/Clear 1.3 supplies checking life 10.9 order information 12.1 system requirements Macintosh 3.2 T toner cartridge maintaining 10.4 redistributing 10.4 replacing 10.5 toner cartridge messages Status LED 1.5 Toner colors 1.3 U USB flash memory managing 9.3 printing 9.2 scanning 9.2 USB Print 1.3 W waste toner container replace 10.8 Windows problems 11.11 2 Samsung Printer Software section SOFTWARE SECTION CONTENTS Chapter 1: INSTALLING PRINTER SOFTWARE IN WINDOWS Installing Printer Software ........................................................................................................ 4 Installing Software for Local Printing ................................................................................. 4 Installing Software for Network Printing ............................................................................. 7 Reinstalling Printer Software ................................................................................................... 10 Removing Printer Software ..................................................................................................... 11 Chapter 2: BASIC PRINTING Printing a Document .............................................................................................................. 12 Printing to a file (PRN) .......................................................................................................... 12 Printer Settings ..................................................................................................................... 13 Layout Tab .................................................................................................................. 13 Paper Tab .................................................................................................................... 14 Graphics Tab ............................................................................................................... 15 Extras Tab ................................................................................................................... 16 About Tab ................................................................................................................... 16 Printer Tab .................................................................................................................. 16 Using a Favorite Setting ................................................................................................ 17 Using Help ................................................................................................................... 17 Chapter 3: ADVANCED PRINTING Printing Multiple Pages on One Sheet of Paper (N-Up Printing) ..................................................... 18 Printing Posters ..................................................................................................................... 19 Printing Booklets .................................................................................................................. 19 Printing on Both Sides of Paper ............................................................................................... 20 Printing a Reduced or Enlarged Document ................................................................................ 20 Fitting Your Document to a Selected Paper Size ......................................................................... 20 Using Watermarks ................................................................................................................. 21 1 Using an Existing Watermark ......................................................................................... 21 Creating a Watermark ................................................................................................... 21 Editing a Watermark ..................................................................................................... 21 Deleting a Watermark ................................................................................................... 21 Using Overlays ...................................................................................................................... 22 What is an Overlay? ...................................................................................................... 22 Creating a New Page Overlay ......................................................................................... 22 Using a Page Overlay .................................................................................................... 22 Deleting a Page Overlay ................................................................................................ 22 Chapter 4: SHARING THE PRINTER LOCALLY Setting Up a Host Computer ................................................................................................... 23 Setting Up a Client Computer .................................................................................................. 23 Chapter 5: USING SMART PANEL Understanding Smart Panel .................................................................................................... 24 Opening the Troubleshooting Guide ......................................................................................... 25 Using Printer Settings Utility ................................................................................................... 25 Using Onscreen Help File ............................................................................................... 25 Changing the Smart Panel Program Settings ............................................................................. 25 Chapter 6: SCANNING Scanning Using Samsung SmarThru ......................................................................................... 26 Uninstalling Samsung SmarThru ..................................................................................... 26 Using Samsung SmarThru ............................................................................................. 27 Using Onscreen Help File ............................................................................................... 28 Scanning Process with TWAIN-enabled Software ........................................................................ 28 Scanning Using the WIA Driver ................................................................................................ 28 Windows XP ................................................................................................................. 28 Windows Vista ............................................................................................................. 28 2 Chapter 7: USING YOUR PRINTER IN LINUX Getting Started ..................................................................................................................... 29 Installing the Unified Linux Driver ............................................................................................ 29 Installing the Unified Linux Driver ................................................................................... 29 Uninstalling the Unified Linux Driver ............................................................................... 30 Using the Unified Driver Configurator ....................................................................................... 31 Opening the Unified Driver Configurator .......................................................................... 31 Printers Configuration ................................................................................................... 31 Scanners Configuration ................................................................................................. 32 Ports Configuration ....................................................................................................... 32 Configuring Printer Properties ................................................................................................. 33 Printing a Document .............................................................................................................. 33 Printing from Applications .............................................................................................. 33 Printing Files ................................................................................................................ 34 Scanning a Document ............................................................................................................ 34 Using the Image Manager .............................................................................................. 35 Chapter 8: USING YOUR PRINTER WITH A MACINTOSH Installing Software for Macintosh ............................................................................................. 37 Setting Up the Printer ............................................................................................................ 38 For a Network-connected Macintosh ................................................................................ 38 For a USB-connected Macintosh ..................................................................................... 38 Printing ................................................................................................................................ 39 Printing a Document ..................................................................................................... 39 Changing Printer Settings .............................................................................................. 39 Printing Multiple Pages on One Sheet of Paper .................................................................. 40 Scanning .............................................................................................................................. 41 3 1 Installing Printer Software in Windows This chapter includes:
Installing Printer Software
Reinstalling Printer Software
Removing Printer Software Installing Printer Software You can install the printer software for local printing or network printing. To install the printer software on the computer, perform the appropriate installation procedure depending on the printer in use. A printer driver is software that lets your computer communicate with your printer. The procedure to install drivers may differ depending on the operating system you are using. All applications should be closed on your PC before beginning installation. Installing Software for Local Printing A local printer is a printer directly attached to your computer using the printer cable supplied with your printer, such as a USB or parallel cable. If your printer is attached to a network, skip this step and go to Installing Software for Network Printing on page 7. You can install the printer software using the typical or custom method. NOTE: If the New Hardware Wizard window appears during the installation procedure, click in the upper right corner of the box to close the window, or click Cancel. Typical Installation This is recommended for most users. All components necessary for printer operations will be installed. 1 Make sure that the printer is connected to your computer and powered on. 2 Insert the supplied CD-ROM into your CD-ROM drive. The CD-ROM should automatically run, and an installation window appears. If the installation window does not appear, click Start and then Run. Type X:\Setup.exe, replacing X with the letter which represents your drive and click OK. If you use Windows Vista, click Start and type X:\Setup.exe in Start Search input box. 3 Click Next.
If necessary, select a language from the drop-down list.
View Users Guide: Allows you to view the Users Guide. If your computer doesnt have Adobe Acrobat, click on this option and it will automatically install Adobe Acrobat Reader for you. 4 Select Typical installation for a local printer. Click Next. 4 Installing Printer Software in Windows NOTE: If your printer is not already connected to the computer, the following window will appear. 7 To register yourself as a user of Samsung Printers in order to receive information from Samsung, select the checkbox and click Finish. You are now sent to the Samsung web site. Otherwise, just click Finish.
After connecting the printer, click Next.
If you dont want to connect the printer at this time, click Next, and No on the following screen. Then the installation will start and a test page will not be printed at the end of the installation. The installation window that appears in this Users Guide may differ depending on the printer and interface in use. 5 After the installation is finished, a window asking you to print a test page appears. If you choose to print a test page, select the checkbox and click Next. Otherwise, just click Next and skip to step 7. 6 If the test page prints out correctly, click Yes. If not, click No to reprint it. NOTE: After setup is complete, if your printer driver doesnt work properly, reinstall the printer driver. See Reinstalling Printer Software on page 10. Custom Installation You can choose individual components to install. 1 Make sure that the printer is connected to your computer and powered on. 2 Insert the supplied CD-ROM into your CD-ROM drive. The CD-ROM should automatically run, and an installation window appears. If the installation window does not appear, click Start and then Run. Type X:\Setup.exe, replacing X with the letter which represents your drive and click OK. If you use Windows Vista, click Start and type X:\Setup.exe in Start Search input box. 5 Installing Printer Software in Windows 3 Click Next.
If necessary, select a language from the drop-down list.
View Users Guide: Allows you to view the Users Guide. If your computer doesnt have Adobe Acrobat, click on this option and it will automatically install Adobe Acrobat Reader for you. 4 Select Custom installation. Click Next. NOTE: If your printer is not already connected to the computer, the following window will appear. 5 Select your printer and click Next.
After connecting the printer, click Next.
If you dont want to connect the printer at this time, click Next, and No on the following screen. Then the installation will start and a test page will not be printed at the end of the installation.
The installation window that appears in this Users Guide may differ depending on the printer and interface in use. 6 Select the components to be installed and click Next. NOTE: You can change the desired installation folder by clicking [Browse]. 7 After the installation is finished, a window asking you to print a test page appears. If you choose to print a test page, select the checkbox and click Next. Otherwise, just click Next and skip to step 9. 8 If the test page prints out correctly, click Yes. If not, click No to reprint it. 6 Installing Printer Software in Windows 9 To register yourself as a user of Samsung Printers in order to receive information from Samsung, select the checkbox and click Finish. You are now sent to the Samsung web site. Otherwise, just click Finish. If you use Windows Vista, click Start and type X:\Setup.exe in Start Search input box. 3 Click Next.
If necessary, select a language from the drop-down list.
View Users Guide: Allows you to view the Users Guide. If your computer doesnt have Adobe Acrobat, click on this option and it will automatically install Adobe Acrobat Reader for you. 4 Select Typical installation for a network printer. Click Next. Installing Software for Network Printing When you connect your printer to a network, you must first configure the TCP/IP settings for the printer. After you have assigned and verified the TCP/IP settings, you are ready to install the software on each computer on the network. You can install the printer software using the typical or custom method. Typical Installation This is recommended for most users. All components necessary for printer operations will be installed. 1 Make sure that the printer is connected to your network and powered on. For details about connecting to the network, see the supplied printers Users Guide. 2 Insert the supplied CD-ROM into your CD-ROM drive. The CD-ROM should automatically run, and an installation window appears. If the installation window does not appear, click Start and then Run. Type X:\Setup.exe, replacing X with the letter which represents your drive and click OK. 7 Installing Printer Software in Windows 5 The list of printers available on the network appears. Select the printer you want to install from the list and then click Next.
If you do not see your printer on the list, click Update to refresh the list, or select Add TCP/IP Port to add your printer to the network. To add the printer to the network, enter the port name and the IP address for the printer. To verify your printers IP address or the MAC address, print a Network Configuration page.
To find a shared network printer (UNC Path), select Shared Printer [UNC] and enter the shared name manually or find a shared printer by clicking the Browse button. NOTE: If you cannot find your machine in network, please turn off the firewall and click Update. 6 After the installation is finished, a window appears asking you to print a test page and to register yourself as a user of Samsung Printers in order to receive information from Samsung. If you so desire, select the corresponding checkbox(es) and click Finish. Otherwise, just click Finish. NOTE: After setup is complete, if your printer driver doesnt work properly, reinstall the printer driver. See Reinstalling Printer Software on page 10. Custom Installation You can choose individual components to install and set a specific IP address. 1 Make sure that the printer is connected to your network and powered on. For details about connecting to the network, see the supplied printers Users Guide. 2 Insert the supplied CD-ROM into your CD-ROM drive. The CD-ROM should automatically run, and an installation window appears. If the installation window does not appear, click Start and then Run. Type X:\Setup.exe, replacing X with the letter which represents your drive and click OK. If you use Windows Vista, click Start and type X:\Setup.exe in Start Search input box. 3 Click Next.
If necessary, select a language from the drop-down list.
View Users Guide: Allows you to view the Users Guide. If your computer doesnt have Adobe Acrobat, click on this option and it will automatically install Adobe Acrobat Reader for you. 8 Installing Printer Software in Windows 4 Select Custom installation. Click Next. TIP: If you want to set a specific IP address on a specific network printer, click the Set IP Address button. The Set IP Address window appears. Do as follows:
5 The list of printers available on the network appears. Select the printer you want to install from the list and then click Next.
If you do not see your printer on the list, click Update to refresh the list, or select Add TCP/IP Port to add your printer to the network. To add the printer to the network, enter the port name and the IP address for the printer. To verify your printers IP address or the MAC address, print a Network Configuration page.
To find a shared network printer (UNC Path), select Shared Printer [UNC] and enter the shared name manually or find a shared printer by clicking the Browse button. NOTE: If you cannot find your machine in network, please turn off the firewall and click Update. a. Select a printer to be set with a specific IP address from the list. b. Configure an IP address, subnet mask, and gateway for the printer manually and click Configure to set the specific IP address for the network printer. c. Click Next. 6 Select the components to be installed. After selecting the components, the following window appears. You can also change the printer name, set the printer to be shared on the network, set the printer as the default printer, and change the port name of each printer. Click Next. To install this software on a server, select the Setting up this printer on a server checkbox. 7 After the installation is finished, a window appears asking you to print a test page and to register yourself as a user of Samsung Printers in order to receive information from Samsung. If you so desire, select the corresponding checkbox(es) and click Finish. 9 Installing Printer Software in Windows Otherwise, just click Finish. network, enter the port name and the IP address for the printer.
To find a shared network printer (UNC Path), select Shared Printer [UNC] and enter the shared name manually or find a shared printer by clicking the Browse button. You will see a component list so that you can reinstall any item individually. NOTE: If your printer is not already connected to the computer, the following window will appear. NOTE: After setup is complete, if your printer driver doesnt work properly, reinstall the printer driver. See Reinstalling Printer Software on page 10. Reinstalling Printer Software You can reinstall the software if installation fails. 1 Start Windows. 2 From the Start menu select Programs or All Programs
your printer driver name Maintenance. 3 Select Repair and click Next. 4 The list of printers available on the network appears. Select the printer you want to install from the list and then click Next.
After connecting the printer, click Next.
If you dont want to connect the printer at this time, click Next, and No on the following screen. Then the installation will start and a test page will not be printed at the end of the installation.
The reinstallation window that appears in this Users Guide may differ depending on the printer and interface in use. 5 Select the components you want to reinstall and click Next. If you installed the printer software for local printing and you select your printer driver name, the window asking you to print a test page appears. Do as follows:
a. To print a test page, select the check box and click Next. b. If the test page prints out correctly, click Yes. If it doesnt, click No to reprint it. 6 When the reinstallation is done, click Finish.
If you do not see your printer on the list, click Update to refresh the list, or select Add TCP/IP Port to add your printer to the network. To add the printer to the 10 Installing Printer Software in Windows Removing Printer Software 1 Start Windows. 2 From the Start menu select Programs or All Programs
your printer driver name Maintenance. 3 Select Remove and click Next. You will see a component list so that you can remove any item individually. 4 Select the components you want to remove and then click Next. 5 When your computer asks you to confirm your selection, click Yes. The selected driver and all of its components are removed from your computer. 6 After the software is removed, click Finish. 11 Installing Printer Software in Windows 2 Basic Printing This chapter explains the printing options and common printing tasks in Windows. This chapter includes:
Printing a Document
Printing to a file (PRN)
Printer Settings
- Layout Tab
- Paper Tab
- Graphics Tab
- Extras Tab
- About Tab
- Printer Tab
- Using a Favorite Setting
- Using Help Printing a Document NOTES:
Your printer driver Properties window that appears in this Users Guide may differ depending on the printer in use. However the composition of the printer properties window is similar.
Check the Operating System(s) that are compatible with your printer. Please refer to the OS Compatibility section of Printer Specifications in your Printer Users Guide.
If you need to know the exact name of your printer, you can check the supplied CD-ROM. The following procedure describes the general steps required for printing from various Windows applications. The exact steps for printing a document may vary depending on the application program you are using. Refer to the Users Guide of your software application for the exact printing procedure. 1 Open the document you want to print. 2 Select Print from the File menu. The Print window is displayed. It may look slightly different depending on your application. The basic print settings are selected within the Print window. These settings include the number of copies and print range. Make sure that your printer is selected. 3 Select your printer driver from the Name drop-down list. To take advantage of the printer features provided by your printer driver, click Properties or Preferences in the applications Print window. For details, see Printer Settings on page 13. If you see Setup, Printer, or Options in your Print window, click it instead. Then click Properties on the next screen. Click OK to close the printer properties window. 4 To start the print job, click OK or Print in the Print window. Printing to a file (PRN) You will sometimes need to save the print data as a file for your purpose. To create a file:
1 Check the Print to file box at the Print window. 2 Select the folder and assign a name of the file and then click OK. 12 Basic Printing Printer Settings You can use the printer properties window, which allows you to access all of the printer options you need when using your printer. When the printer properties are displayed, you can review and change the settings needed for your print job. Your printer properties window may differ, depending on your operating system. This Software Users Guide shows the Properties window for Windows XP. Your printer driver Properties window that appears in this Users Guide may differ depending on the printer in use. If you access printer properties through the Printers folder, you can view additional Windows-based tabs (refer to your Windows Users Guide) and the Printer tab (see Printer Tab on page 16). NOTES:
Most Windows applications will override settings you specify in the printer driver. Change all print settings available in the software application first, and change any remaining settings using the printer driver.
The settings you change remain in effect only while you are using the current program. To make your changes permanent, make them in the Printers folder.
The following procedure is for Windows XP. For other Windows OS, refer to the corresponding Windows User's Guide or online help. 1. Click the Windows Start button. 2. Select Printers and Faxes. 3. Select your printer driver icon. 4. Right-click on the printer driver icon and select Printing Preferences. 5. Change the settings on each tab, click OK. 13 Basic Printing Layout Tab The Layout tab provides options to adjust how the document appears on the printed page. The Layout Options includes Multiple Pages per Side, Poster Printing and Booklet Printing . See Printing a Document on page 12 for more information on accessing printer properties. Paper Orientation Paper Orientation allows you to select the direction in which information is printed on a page.
Portrait prints across the width of the page, letter style.
Landscape prints across the length of the page, spreadsheet style.
Rotate 180 Degrees allows you to rotate the page, 180 degrees. Portrait Landscape Layout Options Layout Options allows you to select advanced printing options. You can choose Multiple Pages per Side, Poster Printing and Booklet Printing.
For details, see Printing Multiple Pages on One Sheet of Paper
(N-Up Printing) on page 18.
For details, see Printing Posters on page 19.
For details, see Printing Booklets on page 19. Double-sided Printing Double-sided Printing allows you to print on both sides of paper. If this option does not appear, your printer does not have this feature.
For details, see Printing on Both Sides of Paper on page 20. Paper Tab Use the following options to set the basic paper handling specifications when you access the printer properties. See Printing a Document on page 12 for more information on accessing printer properties. Click the Paper tab to access various paper properties. Copies Copies allows you to choose the number of copies to be printed. You can select 1 to 999 copies. Size Size allows you to set the size of paper you loaded in the tray. If the required size is not listed in the Size box, click Custom. When the Custom Paper Setting window appears, set the paper size and click OK. The setting appears in the list so that you can select it. Source Make sure that Source is set to the corresponding paper tray. Use Manual Feeder when printing on special materials like envelopes and transparencies. You have to load one sheet at a time into the Manual Tray or Multi-Purpose Tray. If the paper source is set to Auto Selection, the printer automatically picks up print material in the following tray order:
Manual Tray or Multi-Purpose Tray, Tray n. Type Set Type to correspond to the paper loaded in the tray from which you want to print. This will let you get the best quality printout. If not, print quality may not be acheived as you want. Thin: Less than 19 lb (70 g/m2) thin paper. Thick: 24 lb to 32 ib (90~ 120 g/m2) thick paper. Cotton: 20 lb to 24 lb (75~90 g/m2) cotton paper such as Gilbert 25 % and Gilbert 100 %. Plain Paper: Normal plain paper. Select this type if your printer is monochrome and printing on the 16 lb (60 g/m2) cotton paper. Recycled Paper: 20 lb to 24 lb (75~90 g/m2) recycled paper. Color Paper: 20 lb to 24 lb (75~90 g/m2) color-backgrounded paper. First Page This property allows you to print the first page using a different paper type from the rest of the document. You can select the paper source for the first page. For example, load thick stock for the first page into the Multi-
purpose Tray, and plain paper into Tray n. Then, select Tray n in the Source option and Multi-Purpose Tray in the First Page option. Scaling Printing Scaling Printing allows you to automatically or manually scale your print job on a page. You can choose from None, Reduce/
Enlarge, and Fit to Page.
For details, see Printing a Reduced or Enlarged Document on page 20.
For details, see Fitting Your Document to a Selected Paper Size on page 20. 14 Basic Printing Advanced Options You can set advanced settings by clicking the Advanced Options button.
TrueType Options: This option determines what the driver tells the printer about how to image the text in your document. Select the appropriate setting according to the status of your document. This option may be available only in Windows 9x/Me, depending on your particular printer model.
- Download as Bitmap: When this option is selected, the driver will download the font data as bitmap images. Documents with complicated fonts, such as Korean or Chinese, or various other fonts, will print faster in this setting.
- Print as Graphics: When this option is selected, the driver will download any fonts as graphics. When printing documents with high graphic content and relatively few TrueType fonts, printing performance (speed) may be enhanced in this setting.
Print All Text To Black: When the Print All Text To Black option is checked, all text in your document prints solid black, regardless of the color it appears on the screen.
Print All Text To Darken: When the Print All Text To Darken option is checked, all text in your document is allowed to print darker than on a normal document. Some printers do not support this feature. Graphics Tab Use the following Graphic options to adjust the print quality for your specific printing needs. See Printing a Document on page 12 for more information on accessing printer properties. Click the Graphic tab to display the properties shown below.. Quality The Resolution options you can select may vary depending on your printer model. The higher the setting, the sharper the clarity of printed characters and graphics. The higher setting also may increase the time it takes to print a document. Color Mode You can choose color options. Setting to Color typically produces the best possible print quality for color documents. If you want to print a color document in grayscale, select Grayscale. If you want to adjust the color options manually, select Manual and click the Color Adjust or Color Matching button.
Color Adjust : You can adjust the appearance of images by changing the settings in the Levels option.
Color Matching : You can adjust the appearance of images by changing the settings in the Settings option. 15 Basic Printing About Tab Use the About tab to display the copyright notice and the version number of the driver. If you have an Internet browser, you can connect to the Internet by clicking on the web site icon. See Printing a Document on page 12 for more information about accessing printer properties. Printer Tab If you access printer properties through the Printers folder, you can view the Printer tab. You can set the printer configuration. The following procedure is for Windows XP. For other Windows OS, refer to the corresponding Windows User's Guide or online help. 1 Click the Windows Start menu. 2 Select Printers and Faxes. 3 Select your printer driver icon. 4 Right-click on the printer driver icon and select Properties. 5 Click the Printer tab and set the options. Extras Tab You can select output options for your document. See Printing a Document on page 12 for more information about accessing the printer properties. Click the Extras tab to access the following feature:
Watermark You can create a background text image to be printed on each page of your document. For details, see Using Watermarks on page 21. Overlay Overlays are often used to take the place of preprinted forms and letterhead paper. For details, see Using Overlays on page 22. Output Options
Print Subset: You can set the sequence in which the pages print. Select the print order from the drop-down list.
- Normal (1,2,3): Your printer prints all pages from the first page to the last page.
- Reverse All Pages (3,2,1): Your printer prints all pages from the last page to the first page.
- Print Odd Pages: Your printer prints only the odd numbered pages of the document.
- Print Even Pages: Your printer prints only the even numbered pages of the document. 16 Basic Printing Using a Favorite Setting The Favorites option, which is visible on each properties tab, allows you to save the current properties settings for future use. To save a Favorites item:
1 Change the settings as needed on each tab. 2 Enter a name for the item in the Favorites input box. 3 Click Save. When you save Favorites, all current driver settings are saved. To use a saved setting, select the item from the Favorites drop down list. The printer is now set to print according to the Favorites setting you selected. To delete a Favorites item, select it from the list and click Delete. You can also restore the printer drivers default settings by selecting Printer Default from the list. Using Help Your printer has a help screen that can be activated by clicking the Help button in the printer properties window. These help screens give detailed information about the printer features provided by the printer driver. You can also click and then click on any setting. from the upper right corner of the window, 17 Basic Printing 3 Advanced Printing This chapter explains printing options and advanced printing tasks. NOTE:
Your printer driver Properties window that appears in this Users Guide may differ depending on the printer in use. However the composition of the printer properties window is similar.
If you need to know the exact name of your printer, you can check the supplied CD-ROM. This chapter includes:
Printing Multiple Pages on One Sheet of Paper (N-Up Printing)
Printing Posters
Printing Booklets
Printing on Both Sides of Paper
Printing a Reduced or Enlarged Document
Fitting Your Document to a Selected Paper Size
Using Watermarks
Using Overlays 1 3 2 4 Printing Multiple Pages on One Sheet of Paper (N-Up Printing) You can select the number of pages to print on a single sheet of paper. To print more than one page per sheet, the pages will be reduced in size and arranged in the order you specify. You can print up to 16 pages on one sheet. 1 To change the print settings from your software application, access printer properties. See Printing a Document on page 12. 2 From the Layout tab, choose Multiple Pages per Side in the Layout Type drop-down list. 3 Select the number of pages you want to print per sheet
(1, 2, 4, 6, 9, or 16) in the Pages per Side drop-down list. 4 Select the page order from the Page Order drop-down list, if necessary. Check Print Page Border to print a border around each page on the sheet. 5 Click the Paper tab, select the paper source, size, and type. 6 Click OK and print the document. 18 Advanced Printing Printing Booklets 8 9 8 9 This printer feature allows you to print your document on both sides of the paper and arranges the pages so that the paper can be folded in half after printing to produce a booklet. 1 To change the print settings from your software application, access the printer properties. See Printing a Document on page 12. 2 From the Layout tab, choose Booklet Printing from the Type drop-down list. NOTE: The booklet printing option is available when A4, Letter, Legal, or Folio size is selected in the Size option on the Paper tab. 3 Click the Paper tab, and select the paper source, size, and type. 4 Click OK and print the document. 5 After printing, fold and staple the pages. Printing Posters This feature allows you to print a single-page document onto 4, 9, or 16 sheets of paper, for the purpose of pasting the sheets together to form one poster-size document. 1 To change the print settings from your software application, access printer properties. See Printing a Document on page 12. 2 Click the Layout tab, select Poster Printing in the Layout Type drop-down list. 3 Configure the poster option:
You can select the page layout from Poster<2x2>, Poster<3x3>, or Poster<4x4>. If you select Poster<2x2>, the output will be automatically stretched to cover 4 physical pages. Specify an overlap in millimeters or inches to make it easier to pasting the sheets together. 0.15 inches 4 Click the Paper tab, select the paper source, size, and type. 5 Click OK and print the document. You can complete the poster by pasting the sheets together. 0.15 inches 19 Advanced Printing Printing a Reduced or Enlarged Document You can change the size of a pages content to appear larger or smaller on the printed page. 1 To change the print settings from your software application, access printer properties. See Printing a Document on page 12. 2 From the Paper tab, select Reduce/Enlarge in the Printing Type drop-down list. 3 Enter the scaling rate in the Percentage input box. You can also click the or button. 4 Select the paper source, size, and type in Paper Options. 5 Click OK and print the document. Fitting Your Document to a Selected Paper Size This printer feature allows you to scale your print job to any selected paper size regardless of the digital document size. This can be useful when you want to check fine details on a small document. 1 To change the print settings from your software application, access printer properties. See Printing a Document on page 12. 2 From the Paper tab, select Fit to Page in the Printing Type drop-down list. 3 Select the correct size from the Output size drop-down list. 4 Select the paper source, size, and type in Paper Options. 5 Click OK and print the document. Printing on Both Sides of Paper You can print on both sides of a sheet of paper. Before printing, decide how you want your document oriented. The options are:
None
Long Edge, which is the conventional layout used in book binding.
Short Edge, which is the type often used with calendars. 2 2 3 5 3 5 Long Edge 2 3 5 2 3 5 Short Edge NOTE:
Do not print on both sides of labels, transparencies, envelopes, or thick paper. Paper jamming and damage to the printer may result.
To use double-sided printing, you can use only the following paper sizes: A4, Letter, Legal, and Folio, with a weight of 20~24 lbs (75~90 g/m). A 1 To change the print settings from your software application, access printer properties. Printing a Document on page 12. 2 From the Layout tab, select the paper orientation. 3 From the Double-sided Printing section, select the binding option you want. 4 Click the Paper tab and select the paper source, size, and type. 5 Click OK and print the document. NOTE: If your printer does not have a duplex unit, you should complete the printing job manually. The printer prints every other page of the document first. After printing the first side of your job, the Printing Tip window appears. Follow the on-
screen instructions to complete the printing job. 20 Advanced Printing Editing a Watermark 1 To change the print settings from your software application, access printer properties. See Printing a Document on page 12. 2 Click the Extras tab and click the Edit button in the Watermark section. The Edit Watermarks window appears. 3 Select the watermark you want to edit from the Current Watermarks list and change the watermark message and options. 4 Click Update to save the changes. 5 Click OK until you exit the Print window. Deleting a Watermark 1 To change the print settings from your software application, access printer properties. See Printing a Document on page 12. 2 From the Extras tab, click the Edit button in the Watermark section. The Edit Watermarks window appears. 3 Select the watermark you want to delete from the Current Watermarks list and click Delete. 4 Click OK until you exit the Print window. Using Watermarks The Watermark option allows you to print text over an existing document. For example, you may want to have large gray letters reading DRAFT or CONFIDENTIAL printed diagonally across the first page or all pages of a document. There are several predefined watermarks that come with the printer, and they can be modified, or you can add new ones to the list. Using an Existing Watermark 1 To change the print settings from your software application, access printer properties. See Printing a Document on page 12. 2 Click the Extras tab, and select the desired watermark from the Watermark drop-down list. You will see the selected watermark in the preview image. 3 Click OK and start printing. NOTE: The preview image shows how the page will look when it is printed. Creating a Watermark 1 To change the print settings from your software application, access printer properties. See Printing a Document on page 12. 2 Click the Extras tab, and click the Edit button in the Watermark section. The Edit Watermarks window appears. 3 Enter a text message in the Watermark Message box. You can enter up to 40 characters. The message displays in the preview window. When the First Page Only box is checked, the watermark prints on the first page only. 4 Select watermark options. You can select the font name, style, size, or grayscale level from the Font Attributes section and set the angle of the watermark from the Message Angle section. 5 Click Add to add a new watermark to the list. 6 When you have finished editing, click OK and start printing. To stop printing the watermark, select (No Watermark) from the Watermark drop-down list. 21 Advanced Printing Dear ABC Regards WORLD BEST WORLD BEST Using Overlays What is an Overlay?
An overlay is text and/or images stored in the computer hard disk drive (HDD) as a special file format that can be printed on any document. Overlays are often used to take the place of preprinted forms and letterhead paper. Rather than using preprinted letterhead, you can create an overlay containing the exact same information that is currently on your letterhead. To print a letter with your companys letterhead, you do not need to load preprinted letterhead paper in the printer. You need only tell the printer to print the letterhead overlay on your document. Creating a New Page Overlay To use a page overlay, you must create a new page overlay containing your logo or image. 1 Create or open a document containing text or an image for use in a new page overlay. Position the items exactly as you wish them to appear when printed as an overlay. 2 To save the document as an overlay, access printer properties. See Printing a Document on page 12. 3 Click the Extras tab, and click Edit button in the Overlay section. 4 In the Edit Overlay window, click Create Overlay. 5 In the Create Overlay window, type a name of up to eight characters in the File name box. Select the destination path, if necessary. (The default is C:\Formover). 6 Click Save. The name appears on the Overlay List box. 7 Click OK or Yes to finish creating. The file is not printed. Instead it is stored on your computer hard disk drive. NOTE: The overlay document size must be the same as the documents you print with the overlay. Do not create an overlay with a watermark. Using a Page Overlay After an overlay has been created, it is ready to be printed with your document. To print an overlay with a document:
1 Create or open the document you want to print. 2 To change the print settings from your software application, access printer properties. See Printing a Document on page 12. 3 Click the Extras tab. 4 Select the desired overlay from the Overlay drop-down list box. 5 If the overlay file you want does not appear in the Overlay list, click Edit button and Load Overlay, and select the overlay file. If you have stored the overlay file you want to use in an external source, you can also load the file when you access the Load Overlay window. After you select the file, click Open. The file appears in the Overlay List box and is available for printing. Select the overlay from the Overlay List box. 6 If necessary, click Confirm Page Overlay When Printing. If this box is checked, a message window appears each time you submit a document for printing, asking you to confirm your wish to print an overlay on your document. If this box is not checked and an overlay has been selected, the overlay automatically prints with your document. 7 Click OK or Yes until printing begins. The selected overlay downloads with your print job and prints on your document. NOTE: The resolution of the overlay document must be the same as that of the document you will print with the overlay. Deleting a Page Overlay You can delete page overlays that you no longer use. 1 In the printer properties window, click the Extras tab. 2 Click the Edit button in the Overlay section. 3 Select the overlay you want to delete from the Overlay List box. 4 Click Delete Overlay. 5 When a confirming message window appears, click Yes. 6 Click OK until you exit the Print window. 22 Advanced Printing 4 Sharing the Printer Locally You can connect the printer directly to a selected computer, which is called host computer, on the network. The following procedure is for Windows XP. For other Windows OS, refer to the corresponding Windows User's Guide or online help. NOTES:
Check the Operating System(s) that are compatible with your printer. Please refer to the OS Compatibility section of Printer Specifications in your Printer Users Guide.
If you need to know the exact name of your printer, you can check the supplied CD-ROM. Setting Up a Host Computer 1 Start Windows. 2 From the Start menu select Printers and Faxes. 3 Double-click your printer driver icon. 4 From the Printer menu, select Sharing. 5 Check the Share this printer box. 6 Fill in the Shared Name field, and then click OK. Setting Up a Client Computer 1 Right-click the Windows Start button and select Explorer. 2 Open your network folder in the left column. 3 Click the shared name. 4 From the Start menu select Printers and Faxes. 5 Double-click your printer driver icon. 6 From the Printer menu, select Properties. 7 From the Ports tab, click Add Port. 8 Select Local Port and click New Port. 9 Fill in the Enter a port name field with the shared name. 10 Click OK and click Close. 11 Click Apply and click OK. 23 Sharing the Printer Locally 5 Using Smart Panel Smart Panel is a program that monitors and informs you of the status of the printer, and allows you to customize the printers settings. Smart Panel is installed automatically when you install the printer software. NOTES:
To use this program, you need:
- Windows 98 or higher To check for Operating System(s) that are compatible with your printer, refer to Printer Specifications in your Printer Users Guide.
- Mac OS X 10.3 or higher
- Linux. To check for Linux systems that are compatible with your printer, refer to Printer Specifications in your Printer Users Guide.
- Internet Explorer version 5.0 or higher for flash animation in HTML Help.(Only for Windows)
If you need to know the exact name of your printer, you can check the supplied CD-ROM. Understanding Smart Panel If an error occurs while printing, Smart Panel appears automatically, showing the error. You can also launch Smart Panel manually. Double-click the Smart Panel icon on the Windows task bar (in Windows), or Notification Area (in Linux). You can also click it on the status bar (in Mac OS X). Double-click this icon in Windows. Click this icon in Mac OS X. Click this icon in Linux. 24 Using Smart Panel If you are a Windows user, from the Start menu, select Programs or All Programs your printer driver name Smart Panel. NOTES:
If you have already installed more than one Samsung printer, first select the printer model you want in order to use the corresponding Smart Panel. Right-click (in Windows or Linux) or click (in Mac OS X) the Smart Panel icon and select your printer name.
The Smart Panel window and its contents shown in this Software Users Guide may differ depending on the printer or Operating System in use. The Smart Panel program displays the current status of the printer, the level of toner remaining in the toner cartridge(s) and various other information. You can also change settings. 1 2 3 4 5 Toner Level 1 You can view the level of toner remaining in the toner cartridge(s). The printer and the number of toner cartridge(s) shown in the above window may differ depending on the printer in use. Any printers do not have this feature. Buy Now 2 You can order replacement toner cartridge(s) online. Troubleshooting Guide 3 You can view Help to solve problems. Printer Setting 4 You can configure various printer settings in the Printer Settings Utility window. Any printers do not have this feature. NOTE: If your printer is connected to a network and you are a Windows user, the SyncThru Web Service window appears instead of the Printer Settings Utility window. Mac OS X and Linux do not support network environments. Driver Setting (Only for Windows) 5 You can use the printer properties window, which allows you to access all of the printer options you need for using your printer. For details, See Printer Settings on page 13. Opening the Troubleshooting Guide Using the troubleshooting guide, you can view solutions for error status problems. Right-click (in Windows or Linux) or click (in Mac OS X) the Smart Panel icon and select Troubleshooting Guide. Changing the Smart Panel Program Settings Right-click (in Windows or Linux) or click (in Mac OS X) the Smart Panel icon and select Options. The following window opens. Using Printer Settings Utility Using the Printer Settings Utility, you can configure and check print settings. 1 Right-click (in Windows or Linux) or click (in Mac OS X) the Smart Panel icon and select Printer Setting. 2 Change the settings. 3 To send the changes to the printer, click the Apply button. NOTES: If your printer is connected to a network, the SyncThru Web Service window appears instead of the Printer Settings Utility window. Using Onscreen Help File For more information about Printer Settings Utility, click
Display when job is finished for network printer: The computer shows the Smart Panel popup window or balloon when your job is complete in Windows. (Only for Windows network-supported printers.)
Display when error occurs during printing: The computer shows the Smart Panel popup window or balloon when an error occurs during printing.
Display with: You can select how the computer shows you a message. If you select Popup window (Smart Panel), the message appears in the Smart Panel popup window in Windows and Mac OS X.
Launch Job Monitor when the job is saved in the printer: If you store print jobs on the printers hard disk, the computer opens the Job Monitor window in Windows.
(Only for Windows network-supported printers with built-in hard disks.)
Schedule an automatic status checking every: The computer updates the printer status regularly. Setting the value close to 1 second causes the computer to check the printer status more frequently, thereby allowing a faster response to any printer error. 25 Using Smart Panel 6 Scanning Scanning with your machine lets you turn pictures and text into digital files on your computer. Then you can fax or e-mail the files, display them on your web site or use them to create projects that you can print using Samsung SmarThru software or the WIA driver. This chapter includes:
Scanning Using Samsung SmarThru
Scanning Process with TWAIN-enabled Software
Scanning Using the WIA Driver NOTES:
Check the Operating System(s) that are compatible with your printer. Please refer to the OS Compatibility section of Printer Specifications in your Printer Users Guide.
You can check your printer name in the supplied CD-
ROM.
The maximum resolution that can be achieved depends upon various factors, including computer speed, available disk space, memory, the size of the image being scanned, and bit depth settings. Thus, depending on your system and what you are scanning, you may not be able to scan at certain resolutions, especially using enhanced dpi. Scanning Using Samsung SmarThru Samsung SmarThru is the accompanying software for your machine. With SmarThru, scanning is the proverbial piece of cake. NOTE: You can use SmarThru 4 in Windows 98 or higher. Uninstalling Samsung SmarThru NOTE: Before beginning uninstallation, ensure that all applications are closed on your computer. 1 From the Start menu, select Programs. 2 Select SmarThru 4, and then select Uninstall SmarThru 4. 3 When your computer asks you to confirm, click OK. 4 Click Finish. You may be prompted to restart your computer. In this case you must shut the computer down and then restart it before the changes will be saved. 26 Scanning Using Samsung SmarThru Follow these steps to start scanning using the SmarThru:
1 Make sure that your machine and computer are turned on and properly connected to each other. 2 Place your photograph or page on the document glass or ADF. 3 Once you have installed Samsung SmarThru, you will see the SmarThru 4 icon on your desktop. Double-click the SmarThru 4 icon. Double-click this icon. The SmarThru 4 window opens. Make sure that your printer is selected.
Scan To Allows you to scan an image and save it to an application or folder, email it, or publish it on a web site.
Image Allows you to edit an image you have saved as a graphic file and send it to a selected application or folder, email it, or publish it on a web site.
Copy Allows you to produce professional quality copies. You can make black and white or color copies of an image if your machine supports it, and customize the copy settings.
Print Allows you to print images you have saved. You can print images in black and white or color mode if your machine supports it.
Fax Allows you to fax images or files you have saved on your computer. This is available when your machine supports the fax feature. 4 Click Scan To. The Scan To menu bar appears on the SmarThru 4 window. Scan To menu bar Adjust the scan settings. Click to start scanning. Scan To lets you use the following services:
Application Scanning an image and placing it in an image editor application, such as Paint or Adobe Photoshop.
E-mail Scanning an image and emailing it. Allows you to scan an image, preview it, and email it. NOTE: To send an image by e-mail, you must have a mail client program, like Outlook Express, which has been set up with your e-mail account.
Folder Scanning an image and saving it to a folder. Allows you to scan an image, preview it, and save it to the folder of your choice.
OCR Scanning an image and performing text recognition. Allows you to scan an image, preview it, and send it to the OCR program for text recognition.
- Recommended Scan Option for OCR
- Resolution: 200 or 300 dpi
- Image Type: Grayscale or Black & White
Web Scanning an image, previewing it, and publishing it on a web site, using the specified file format for the image you want to publish. 27 Scanning
Settings Customizing settings of Scan To basic functions. Allows you to customize settings for Application, E-mail, OCR, and Web functions. 5 Click the service icon according to your job. 6 SmarThru 4 opens for the selected service. Adjust the scan settings. 7 To start scanning, click Scan. NOTE: If you want to cancel the scan job, click Cancel. Using Onscreen Help File For more information about SmarThru, click at the top right corner of the window. The SmarThru Help window opens and allows you to view onscreen help supplied on the SmarThru program. Scanning Process with TWAIN-
enabled Software If you want to scan documents using other software, you will need to use TWAIN-compliant software, such as Adobe PhotoDeluxe or Adobe Photoshop. The first time you scan with your machine, select it as your TWAIN source in the application you use. The basic scanning process involves a number of steps:
1 Make sure that your machine and computer are turned on and properly connected to each other. 2 Load the document(s) face up into the ADF. OR Place a single document face down on the document glass. 3 Open an application, such as PhotoDeluxe or Photoshop. 4 Open the TWAIN window and set the scan options. 5 Scan and save your scanned image. NOTE: You need to follow the programs instructions for acquiring an image. Please refer to the users guide of the application. 28 Scanning Scanning Using the WIA Driver Your machine also supports the Windows Image Acquisition
(WIA) driver for scanning images. WIA is one of the standard components provided by MicrosoftWindowsXP/Vista and works with digital cameras and scanners. Unlike the TWAIN driver, the WIA driver allows you to scan and easily manipulate images without using additional software. NOTE: The WIA driver works only on Windows XP/Vista with USB port. Windows XP 1 Load the document(s) face up into the DADF (or ADF). OR Place a single document face down on the document glass. 2 From the Start menu on your desktop window, select Control Panel, and then Scanners and Cameras. 3 Double click your scanner driver icon. The Scanner and Camera Wizard launches. 4 Choose your scanning preferences and click Preview to see how your preferences affect the picture. 5 Click Next. 6 Enter a picture name, and select a file format and destination to save the picture. 7 Follow the on-screen instructions to edit the picture after it is copied to your computer. NOTE: If you want to cancel the scan job, press the Cancel button on the Scanner and Camera Wizard. Windows Vista 1 Load the document(s) face up into the DADF (or ADF). OR Place a single document face down on the document glass. 2 From the Start menu select Control Panel Hardware and Sound Scanners and Cameras. 3 Click on Scan a document or picture. Then Windows Fax and Scan application is opened automatically. NOTE: To view scanners, user can click on View Scanners and Cameras. 4 Click New Scan and then scan driver is opened. 5 Choose your scanning preferences and click Preview to see your preferences affect the picture. 6 Click Scan. 7 Using Your Printer in Linux You can use your machine in a Linux environment. This chapter includes:
Getting Started
Installing the Unified Linux Driver
Using the Unified Driver Configurator
Configuring Printer Properties
Printing a Document
Scanning a Document Getting Started The supplied CD-ROM provides you with Samsungs Unified Linux Driver package for using your machine with a Linux computer. Samsungs Unified Linux Driver package contains printer and scanner drivers, providing the ability to print documents and scan images. The package also delivers powerful applications for configuring your machine and further processing of the scanned documents. After the driver is installed on your Linux system, the driver package allows you to monitor a number of machine devices via fast ECP parallel ports and USB simultaneously. The acquired documents can then be edited, printed on the same local or network machine devices, sent by e-mail, uploaded to an FTP site, or transferred to an external OCR system. The Unified Linux Driver package is supplied with a smart and flexible installation program. You don't need to search for additional components that might be necessary for the Unified Linux Driver software: all required packages will be carried onto your system and installed automatically; this is possible on a wide set of the most popular Linux clones. Installing the Unified Linux Driver Installing the Unified Linux Driver 1 Make sure that you connect your machine to your computer. Turn both the computer and the machine on. 2 When the Administrator Login window appears, type in root in the Login field and enter the system password. NOTE: You must log in as a super user (root) to install the printer software. If you are not a super user, ask your system administrator. 3 Insert the printer software CD-ROM. The CD-ROM will automatically run. If the CD-ROM does not automatically run, click the icon at the bottom of the desktop. When the Terminal screen appears, type in:
If the CD-ROM is secondary master and the location to mount is /mnt/cdrom,
[root@localhost root]#mount -t iso9660 /dev/hdc /mnt/
cdrom
[root@localhost root]#cd /mnt/cdrom/Linux
[root@localhost root]#./install.sh NOTE: The installation program runs automatically if you have an autorun software package installed and configured. 4 When the welcome screen appears, click Next. 29 Using Your Printer in Linux 5 When the installation is complete, click Finish. The installation program has added the Unified Driver Configurator desktop icon and Samsung Unified Driver group to the system menu for your convenience. If you have any difficulties, consult the onscreen help that is available through your system menu or can otherwise be called from the driver package windows applications, such as Unified Driver Configurator or Image Manager. Uninstalling the Unified Linux Driver 1 When the Administrator Login window appears, type in root in the Login field and enter the system password. NOTE: You must log in as a super user (root) to install the printer software. If you are not a super user, ask your system administrator. 2 Insert the printer software CD-ROM. The CD-ROM will automatically run. If the CD-ROM does not automatically run, click the icon at the bottom of the desktop. When the Terminal screen appears, type in:
If the CD-ROM is secondary master and the location to mount is /mnt/cdrom,
[root@localhost root]#mount -t iso9660 /dev/hdc /mnt/
cdrom
[root@localhost root]#cd /mnt/cdrom/Linux
[root@localhost root]#./uninstall.sh NOTE: The installation program runs automatically if you have an autorun software package installed and configured. 3 Click Uninstall. 4 Click Next. 5 Click Finish. 30 Using Your Printer in Linux Using the Unified Driver Configurator Unified Linux Driver Configurator is a tool primarily intended for configuring Printer or MFP devices. Since an MFP device combines the printer and scanner, the Unified Linux Driver Configurator provides options logically grouped for printer and scanner functions. There is also a special MFP port option responsible for the regulation of access to an MFP printer and scanner via a single I/O channel. After installing the Unified Linux driver, the Unified Linux Driver Configurator icon will automatically be created on your desktop. Opening the Unified Driver Configurator 1 Double-click Unified Driver Configurator on the desktop. You can also click the Startup Menu icon and select Samsung Unified Driver and then Samsung Unified Driver Configurator. 2 Press each button on the Modules pane to switch to the corresponding configuration window. Printers Configuration button Scanners Configuration button Ports Configuration button Printers Configuration Printers configuration has the two tabs: Printers and Classes. Printers Tab You can see the current systems printer configuration by clicking on the printer icon button on the left side of the Unified Driver Configurator window. Switches to Printer configuration. Shows the status, model name and URI of your printer. Shows all of the installed printer. You can use the following printer control buttons:
Refresh: renews the available printers list.
Add Printer: allows you to add a new printer.
Remove Printer: removes the selected printer.
Set as Default: sets the current printer as a default printer.
Stop/Start: stops/starts the printer.
Test: allows you to print a test page to check if the machine is working properly.
Properties: allows you to view and change the printer properties. For details, see page 33. You can use the onscreen help by clicking Help. 3 After changing the configurations, click Exit to close the Unified Driver Configurator. 31 Using Your Printer in Linux Classes Tab The Classes tab shows a list of available printer classes. Ports Configuration In this window, you can view the list of available ports, check the status of each port and release a port that is stalled in busy state when its owner is terminated for any reason. Switches to ports configuration. Shows the port type, device connected to the port and status Shows all of the available ports.
Refresh : Renews the available ports list.
Release port : Releases the selected port. Sharing Ports Between Printers and Scanners Your machine may be connected to a host computer via the parallel port or USB port. Since the MFP device contains more than one device (printer and scanner), it is necessary to organize proper access of consumer applications to these devices via the single I/O port. The Samsung Unified Linux Driver package provides an appropriate port sharing mechanism that is used by Samsung printer and scanner drivers. The drivers address their devices via so-called MFP ports. The current status of any MFP port can be viewed via the Ports Configuration. The port sharing prevents you from accessing one functional block of the MFP device, while another block is in use. When you install a new MFP device onto your system, it is strongly recommended you do this with the assistance of an Unified Driver Configurator. In this case you will be asked to choose I/O port for the new device. This choice will provide the most suitable configuration for MFPs functionality. For MFP scanners I/O ports are being chosen by scanner drivers automatically, so proper settings are applied by default. Shows all of the printer classes. Shows the status of the class and the number of printers in the class.
Refresh : Renews the classes list.
Add Class... : Allows you to add a new printer class.
Remove Class : Removes the selected printer class. Scanners Configuration In this window, you can monitor the activity of scanner devices, view a list of installed Samsung MFP devices, change device properties, and scan images. Switches to Scanners configuration. Shows all of the installed scanners. Shows the vendor, model name and type of your scanner.
Properties... : Allows you to change the scan properties and scan a document. See page 34.
Drivers... : Allows you to monitor the activity of the scan drivers. 32 Using Your Printer in Linux Configuring Printer Properties Printing a Document Using the properties window provided by the Printers configuration, you can change the various properties for your machine as a printer. 1 Open the Unified Driver Configurator. If necessary, switch to Printers configuration. 2 Select your machine on the available printers list and click Properties. 3 The Printer Properties window opens. Printing from Applications There are a lot of Linux applications that you are allowed to print from using Common UNIX Printing System (CUPS). You can print on your machine from any such application. 1 From the application you are using, select Print from the File menu. 2 Select Print directly using lpr. 3 In the LPR GUI window, select the model name of your machine from the Printer list and click Properties. Click. The following five tabs display at the top of the window:
General: allows you to change the printer name, location and description. The name entered in this tab displays on the printer list in Printers configuration.
Connection: allows you to view or select another port. If you change the printer port from USB to parallel or vice versa while in use, you must re-configure the printer port in this tab.
Driver: allows you to view or select another printer driver. By clicking Options, you can set the default device options.
Jobs: shows the list of print jobs. Click Cancel job to cancel the selected job and select the Show completed jobs check box to see previous jobs on the job list.
Classes: shows the class that your printer is in. Click Add to Class to add your printer to a specific class or click Remove from Class to remove the printer from the selected class. 4 Click OK to apply the changes and close the Printer Properties Window. 4 Change the printer and print job properties. 33 Using Your Printer in Linux The following four tabs display at the top of the window.
General - allows you to change the paper size, the paper type, and the orientation of the documents, enables the duplex feature, adds start and end banners, and changes the number of pages per sheet.
Text - allows you to specify the page margins and set the text options, such as spacing or columns.
Graphics - allows you to set image options that are used when printing images/files, such as color options, image size, or image position.
Device: allows you to set the print resolution, paper source, and destination. 5 Click Apply to apply the changes and close the Properties window. 6 Click OK in the LPR GUI window to start printing. 7 The Printing window appears, allowing you to monitor the status of your print job. To abort the current job, click Cancel. Printing Files You can print many different types of files on the Samsung machine device using the standard CUPS way - directly from the command line interface. The CUPS lpr utility allows you do that. But the drivers package replaces the standard lpr tool by a much more user-friendly LPR GUI program. To print any document file:
1 Type lpr <file_name> from the Linux shell command line and press Enter. The LPR GUI window appears. When you type only lpr and press Enter, the Select file(s) to print window appears first. Just select any files you want to print and click Open. 2 In the LPR GUI window, select your printer from the list, and change the printer and print job properties. For details about the properties window, see page 33. 3 Click OK to start printing. Scanning a Document You can scan a document using the Unified Driver Configurator window. 1 Double-click the Unified Driver Configurator on your desktop. 2 Click the 3 Select the scanner on the list. button to switch to Scanners Configuration. Click your scanner. When you have only one MFP device and it is connected to the computer and turned on, your scanner appears on the list and is automatically selected. If you have two or more scanners attached to your computer, you can select any scanner to work at any time. For example, while acquisition is in progress on the first scanner, you may select the second scanner, set the device options and start the image acquisition simultaneously. 4 Click Properties. 5 Load the document to be scanned face up into the ADF
(Automatic Document Feeder) or face down on the document glass. 6 Click Preview in the Scanner Properties window. 34 Using Your Printer in Linux The document is scanned and the image preview appears in the Preview Pane. Drag the pointer to set the image area to be scanned. 7 Change the scan options in the Image Quality and Scan Area sections.
Image Quality: allows you to select the color composition and the scan resolution for the image.
Scan Area: allows you to select the page size. The Advanced button enables you to set the page size manually. If you want to use one of the preset scan option settings, select from the Job Type drop-down list. For details about the preset Job Type settings, see page 35. You can restore the default setting for the scan options by clicking Default. 8 When you have finished, click Scan to start scanning. The status bar appears on the bottom left of the window to show you the progress of the scan. To cancel scanning, click Cancel. 9 The scanned image appears in the new Image Manager tab. 10 When you are finished, click Save on the toolbar. 11 Select the file directory where you want to save the image and enter the file name. 12 Click Save. Adding Job Type Settings You can save your scan option settings to retrieve for a later scanning. To save a new Job Type setting:
1 Change the options from the Scanner Properties window. 2 Click Save As. 3 Enter the name for your setting. 4 Click OK. Your setting is added to the Saved Settings drop-down list. To save a Job Type setting for the next scan job:
1 Select the setting you want to use from the Job Type drop-
down list. 2 The next time you open the Scanner Properties window, the saved setting is automatically selected for the scan job. To delete a Job Type setting:
1 Select the setting you want to delete from the Job Type drop-down list. 2 Click Delete. The setting is deleted from the list Using the Image Manager The Image Manager application provides you with menu commands and tools to edit your scanned image. Use these tools to edit the image. If you want to edit the scanned image, use the toolbar. For further details about editing an image, see page 35. 35 Using Your Printer in Linux You can use the following tools to edit the image:
Tools Function Saves the image. Cancels your last action. Restores the action you canceled. Allows you to scroll through the image. Crops the selected image area. Zooms the image out. Zooms the image in. Allows you to scale the image size; you can enter the size manually, or set the rate to scale proportionally, vertically, or horizontally. Allows you to rotate the image; you can select the number of degrees from the drop-
down list. Allows you to flip the image vertically or horizontally. Allows you to adjust the brightness or contrast of the image, or to invert the image. Shows the properties of the image. For further details about the Image Manager application, refer to the onscreen help. 36 Using Your Printer in Linux 8 Using Your Printer with a Macintosh Your printer supports Macintosh systems with a built-in USB interface or 10/100 Base-TX network interface card. When you print a file from a Macintosh computer, you can use the CUPS driver by installing the PPD file. NOTE: Some printers do not support a network interface. Make sure that your printer supports a network interface by referring to Printer Specifications in your Printer Users Guide. This chapter includes:
Installing Software for Macintosh
Setting Up the Printer
Printing
Scanning Installing Software for Macintosh The CD-ROM that came with your printer provides you with the PPD file that allows you to use the CUPS driver or Apple LaserWriter driver (only available when you use a printer which supports the PostScript driver), for printing on a Macintosh computer. Also, it provides you with the Twain driver for scanning on a Macintosh computer. Install the Printer driver 1 Make sure that you connect your printer to the computer. Turn on your computer and printer. 2 Insert the CD-ROM which came with your printer into the CD-ROM drive. 3 Double-click CD-ROM icon that appears on your Macintosh desktop. 4 Double-click the MAC_Installer folder. 5 Double-click the MAC_Printer folder. 6 Double-click the Samsung SPLC Installer icon. 7 Enter the password and click OK. 8 The Samsung SPL Installer window opens. Click Continue and then click Continue. 9 Select Easy Install and click Install. 10 After the installation is finished, click Quit. Uninstalling the Printer driver Uninstall is required if you are upgrading the software, or if installation fails. 1 Insert the CD-ROM which came with your printer into the CD-ROM drive. 2 Double-click CD-ROM icon that appears on your Macintosh desktop. 3 Double-click the MAC_Installer folder. 4 Double-click the MAC_Printer folder. 5 Double-click the Samsung SPLC Installer icon. 6 Enter the password and click OK. 7 The Samsung SPL Installer window opens. Click Continue and then click Continue. 8 Select Uninstall and then click Uninstall. 9 When the uninstallation is done, click Quit. 37 Using Your Printer with a Macintosh Install the Scan driver 1 Make sure that you connect your printer to the computer. Turn on your computer and printer. 2 Insert the CD-ROM which came with your printer into the CD-ROM drive. 3 Double-click CD-ROM icon that appears on your Macintosh desktop. 4 Double-click the MAC_Installer folder. 5 Double-click the MAC_Twain folder. 6 Double-click the Samsung ScanThru Installer icon. 7 Enter the password and click OK. 8 Click Continue. 9 Click Install. 10 Click Continue. 11 After the installation is finished, click Quit. Uninstalling the Scan driver 1 Insert the CD-ROM which came with your printer into the CD-ROM drive. 2 Double-click CD-ROM icon that appears on your Macintosh desktop. 3 Double-click the MAC_Installer folder. 4 Double-click the MAC_Twain folder. 5 Double-click the Samsung ScanThru Installer icon. 6 Enter the password and click OK. 7 Click Continue. 8 Select Uninstall from the Installation Type and then Click Uninstall. 9 Click Continue. 10 When the uninstallation is done, click Quit. Setting Up the Printer Set up for your printer will be different depending on which cable you use to connect the printer to your computerthe network cable or the USB cable. For a Network-connected Macintosh NOTE: Some printers do not support a network interface. Before connecting your printer, make sure that your printer supports a network interface by referring to Printer Specifications in your Printer Users Guide. 1 Follow the instructions on Installing Software for Macintosh on page 37 to install the PPD and Filter files on your computer. 2 Open Print Setup Utility from the Utilities folder. 3 Click Add on the Printer List. 4 Select the IP Printing tab. 5 Select Socket/HP Jet Direct in Printer Type. WHEN PRINTING A DOCUMENT CONTAINING MANY PAGES, PRINTING PERFORMANCE MAY BE ENHANCED BY CHOOSING SOCKET FOR PRINTER TYPE OPTION. 6 Enter the printers IP address in the Printer Address field. 7 Enter the queue name in the Queue Name field. If you cannot determine the queue name for your printer server, try using the default queue first. 8 Select Samsung in Printer Model and your printer in Model Name. 9 Click Add. 10 Your printers IP address appears on the Printer List, and is set as the default printer. For a USB-connected Macintosh 1 Follow the instructions on Installing Software for Macintosh on page 37 to install the PPD and Filter files on your computer. 2 Open Print Setup Utility from the Utilities folder. 3 Click Add on the Printer List. 4 Select the USB tab. 5 Select Samsung in Printer Model and your printer in Model Name. 6 Click Add. Your printer appears on the Printer List, and is set as the default printer. 38 Using Your Printer with a Macintosh Changing Printer Settings You can use advanced printing features when using your printer. From your Macintosh application, select Print from the File menu. The printer name which appears in the printer properties window may differ depending on the printer in use. Except for the name, the composition of the printer properties window is similar. Layout Setting The Layout tab provides options to adjust how the document appears on the printed page. You can print multiple pages on one sheet of paper. Select Layout from the Presets drop-down list to access the following features. For details, see Printing Multiple Pages on One Sheet of Paper on the next column. Printing NOTES:
The Macintosh printers properties window that appears in this Users Guide may differ depending on the printer in use. However the composition of the printer properties window is similar.
You can check your printer name in the supplied CD-
ROM. Printing a Document When you print with a Macintosh, you need to check the printer software setting in each application you use. Follow these steps to print from a Macintosh. 1 Open a Macintosh application and select the file you want to print. 2 Open the File menu and click Page Setup (Document Setup in some applications). 3 Choose your paper size, orientation, scaling, and other options and click OK. Make sure that your printer is selected. Mac OS 10.3 Mac OS 10.3 4 Open the File menu and click Print. 5 Choose the number of copies you want and indicate which pages you want to print. 6 Click Print when you finish setting the options. 39 Using Your Printer with a Macintosh Printer Features Setting The Printer Features tab provides options for selecting the paper type and adjusting print quality. Select Printer Features from the Presets drop-down list to access the following features:
Printing Multiple Pages on One Sheet of Paper You can print more than one page on a single sheet of paper. This feature provides a cost-effective way to print draft pages. 1 From your Macintosh application, select Print from the File menu. 2 Select Layout. Mac OS 10.3 Paper Type Set Type to correspond to the paper loaded in the tray from which you want to print. This will let you get the best quality printout. If you load a different type of print material, select the corresponding paper type. Resolution(Quality) The Resolution options you can select may vary depending on your printer model. You can select the printing resolution. The higher the setting, the sharper the clarity of printed characters and graphics. The higher setting also may increase the time it takes to print a document. Color Mode You can set the color options. Setting to Color typically produces the best possible print quality for color documents. If you want to print a color document in grayscale, select Grayscale. Mac OS 10.3 3 Select the number of pages you want to print on one sheet of paper on the Pages per Sheet drop-down list. 4 Select the page order from the Layout Direction option. To print a border around each page on the sheet, select the option you want from the Border drop-down list. 5 Click Print, and the printer prints the selected number of pages on one side of each page. 40 Using Your Printer with a Macintosh Scanning If you want to scan documents using other software, you will need to use TWAIN-compliant software, such as Adobe PhotoDeluxe or Adobe Photoshop. The first time you scan with your machine, select it as your TWAIN source in the application you use. The basic scanning process involves a number of steps:
1. Place your photograph or page on the document glass or ADF. 2. Open an application, such as PhotoDeluxe or Photo-
shop. 3. Open the TWAIN window and set the scan options. 4. Scan and save your scanned image. NOTE: You need to follow the programs instructions for acquiring an image. Please refer to the Users Guide of the application. 41 Using Your Printer with a Macintosh SOFTWARE SECTION INDEX A advanced printing, use 18 B booklet printing 19 C canceling scan 28 D document, print Macintosh 39 Windows 12 double-sided printing 20 E Extras properties, set 16 F favorites settings, use 17 G Graphics properties, set 15 H help, use 17 I install printer driver Macintosh 37 Windows 4 installing Linux software 29 L Layout properties, set Macintosh 39 Windows 13 Linux driver, install 29 printer properties 33 printing 33 scanning 34 M Macintosh driver install 37 uninstall 37 printing 39 scanning 41 setting up the printer 38 MFP driver, install Linux 29 N n-up printing Macintosh 40 Windows 18 O orientation, print 34 Windows 13 overlay create 22 delete 22 print 22 paper type, set Macintosh 40 print 34 poster, print 19 print document 12 fit to page 20 from Macintosh 39 from Windows 12 N-up Macintosh 40 Windows 18 overlay 22 poster 21 PRN 12 scaling 20 watermark 21 print resolution 34 printer driver, install printer properties Linux 29 Linux 33 printer properties, set Macintosh 39 Windows 13 printer resolution, set Macintosh 40 Windows 15 printer software install Macintosh 37 Windows 4 uninstall Macintosh 37 Windows 11 booklets 19 double-sided 20 from Linux 33 printing P Paper properties, set 14 paper size, set 14 print 34 paper source, set 34 Windows 14 42 R resolution printing 34 S scanning Linux 34 SmarThru 26 TWAIN 28 WIA driver 28 scanning from Macintosh 41 setting darkness 15 favorites 17 image mode 15 resolution Macintosh 40 Windows 15 toner save 15 true-type option 15 software install Macintosh 37 Windows 4 reinstall Windows 10 system requirements Macintosh 37 uninstall Macintosh 37 Windows 11 status monitor, use 24 T toner save, set 15 TWAIN, scan 28 U uninstall, software Macintosh 37 Windows 11 uninstalling MFP driver Linux 30 W watermark create 21 delete 21 edit 21 print 21 WIA, scan 28 43 Ver. 0.98
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2007-03-27 | JBP - Part 15 Class B Computing Device Peripheral | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2007-03-27
|
||||
1 | Applicant's complete, legal business name |
Samsung Electronics Co Ltd
|
||||
1 | FCC Registration Number (FRN) |
0027908797
|
||||
1 | Physical Address |
19 Chapin Rd., Building D
|
||||
1 |
Pine Brook, New Jersey 07058
|
|||||
1 |
United States
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
r******@pctestlab.com
|
||||
1 | TCB Scope |
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
A3L
|
||||
1 | Equipment Product Code |
CLX2160N
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
J****** C****
|
||||
1 | Title |
General Manager
|
||||
1 | Telephone Number |
973-8********
|
||||
1 | Fax Number |
973-8********
|
||||
1 |
j******@samsung.com
|
|||||
app s | Technical Contact | |||||
1 | Firm Name |
PCTEST Engineering Lab., Inc.
|
||||
1 | Name |
R****** O****
|
||||
1 | Physical Address |
6660-B Dobbin Road
|
||||
1 |
Columbia, Maryland 21045
|
|||||
1 |
United States
|
|||||
1 | Telephone Number |
410-2********
|
||||
1 | Fax Number |
410-2********
|
||||
1 |
r******@pctestlab.com
|
|||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | JBP - Part 15 Class B Computing Device Peripheral | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Multi Function Color Laser Printer | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
Samsung Electronics Co., Ltd.
|
||||
1 | Name |
J******** L****
|
||||
1 | Telephone Number |
82-31********
|
||||
1 | Fax Number |
82-31********
|
||||
1 |
j******@samsung.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15B |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC