FCC ID: A3L-NP-Q1-C Notebook PC

Users Guide 1 Product Features Small but Strong UMPC (Ultra Mobile PC) VIA C7 MULV 512MB ~ Max. 1GB DDR2 Memory 1.8" High Capacity Hard Disk Drive of 30~60GB 7" WVGA TFT LCD Basic Resolution of 800x480 Pixels, Maximum Resolution of 1600x1200 Pixels

(when an external display is connected) Auto Scaler (Automatic Resolution Adjustment) Function to Support High Resolu-

tion Output Easy-to-Use Touch Screen usable with your fingers. Microsoft Windows XP Tablet PC Edition Resolve PDA and Pocket PC restrictions Usability Similar to a Normal PC with Windows Powerful Multimedia Functions Various Multimedia Programs Such as AVStation etc. Multiple Network Support Wireless LAN, Bluetooth (Optional) Resolves Space Restrictions through the Wireless Communication Function Compact, Light-Weight Design for Portability / Polished Design A mere 746g (Including the Bluetooth modules) High-Gloss Front Panel Optional Accessories for Additional Convenience USB Data Cable Enabling Data Exchange with another PC. USB External ODD, Ultra-Slim USB External Keyboard Power Bank to Extend Use Time Product Features 2 Using Your Document Congratulations on your purchase of a computer with the Windows XP operating system. Whether you are new to using a portable computer or are an experienced user, this users manual can help you get the most from your computer. Manual Documentation Conventions Some devices and software may differ from the descriptions in the User's guide or may not be supplied with the product depending on your computer model. The actual appearance of the computer may differ from the pictures printed on the cover and in the User's guide. This manual describes procedures with both the Stylus Pen and Mouse.

'Single-Click' in this manual also means 'Single-tap' for the Stylus Pen. Information Icons Three icons and their associated messages appear in this manual. The information icons are placed before the step/information they apply to:

Warning Indicates the possibility of personal injury. Caution Warns you of possible damage to equipment or data. Note Informs you of special circumstances. Before starting!

Informs you of special requirements or limitations for use of item(s). p.xx Shows the page number you can refer to for more detailed information. Using Your Document 3 Contents Product Features Using Your Document Contents Safety Precautions Maintaining a Proper Posture While Using the Computer Chapter 1. Getting Started Overview Front View / Status Indicators Top View Right View Left View Rear View Turning the Computer On and Off Turning the computer on Turning the computer off 2 3 4 6 11 14 14 15 16 16 17 18 18 18 Chapter 2. Using the Computer Stylus Pen Entering Text Using the Tablet PC Input Panel Entering text using the Dialkeys Volume Control Using the Buttons The Menu Button The Quick Launch Button The Auto Scaler Button Using an external Monitor Connecting a Monitor Viewing on a Monitor Dual View 20 22 22 25 26 27 27 28 30 31 31 31 32 Chapter 3. Using Microsoft Windows XP About Microsoft Windows XP Get Going with the Tablet PC Tablet PC Tutorials Reinstalling Windows XP The Windows XP Screen Layout Desktop Understanding the Start Menu Understanding a Window Control Panel Opening the Control Panel User Account Changing the Resolution and Colors Chapter 4. Using the Network Connecting to a Wireless LAN Connecting to an Access Point (AP) Connecting to computer-to-computer networks (peer-to-peer or ad hoc) Setting up a Wireless Network Setup Using the Wireless LAN Setup Program Using Samsung Network Manager Setting Up a Network Accessing a network from a different location Network Status Diagnosis Using Bluetooth Devices Bluetooth Software Setup Using Bluetooth 35 35 36 36 37 37 38 39 40 40 41 43 45 46 47 50 51 51 54 54 55 56 58 Contents 4 Chapter 5. Using Applications Chapter 7. Troubleshooting / Appendix Introducing Programs Using Samsung Update Plus Program Launcher Program Launcher Screen Layout Using Program Launcher Using AVStation premium Start and Screen Layout MUSIC Station PHOTO Station MOVIE Station Using AVStation NOW /

AVStation Viewer Start / Exit AVStation NOW Start / Exit AVStation Viewer Screen Layout MUSIC Station PHOTO Station MOVIE Station CyberLink PowerDVD Chapter 6. Settings Using System Setup Starting System Setup The System Setup Screen Setting a Booting Password Changing the Booting Priority Using the Battery Removing and Attaching a Battery Charging the Battery Monitoring the Battery Charge Extending the Battery Usage Time 63 65 67 67 68 69 69 70 73 76 79 79 80 81 81 83 84 86 89 89 90 92 95 96 96 97 97 99 103 104 105 105 Using Magic Doctor Using Norton AntiVirus Restoring the System Creating a Restore Point Returning your computer to an earlier restore point Undoing the last restoration Reinstalling Software Questions and Answers Reinstalling Windows XP Running the system software Media Installing drivers and programs 106 107 108 108 109 110 110 Running the System Recovery Media 111 Quick Installation Standard Installation 112 Installing Windows When Windows Fails 113 114 114 114 116 117 120 121 122 124 125 Specifications 127 Glossary 130 Index Important Safety Information 131 Regulatory Compliance Statements 132 WEEE Symbol Information 138 139 Contact SAMSUNG WORLD WIDE Windows Related Display Related Sound Related Wireless LAN Related Games and Programs Related Bluetooth Security Center Other Contents 5 Safety Precautions For security purposes and to prevent damage, please read the following safety instructions carefully. Warning Failing to follow the instructions marked with this symbol may cause injury to yourself and even fatality. Caution Failing to follow the instructions marked with this symbol may cause injury to yourself or damage the product. Warning Installation Related Do not install the product in places exposed to humidity such as bathrooms. There is a danger of electric shock. Use the product within the operating conditions specified in the User Guide. Keep the plastic bags out of reach of childrens reach, as there is a danger of suffo-

cation. Power Related Do not touch the power cord with wet hands, as there is a danger of electric shock. Take care not to exceed the standard capacity (voltage/current) of a multi-tap or power outlet extension when using it for the product. Electric leakage may cause electric shock or fire. If the power cord or power outlet makes a noise, disconnect the power cord from the wall outlet and contact a service center, as there is a danger of electric shock or fire. Do not use a damaged or loose power cord or power outlet, as there is a danger of electric shock or fire. Plug the power cord into the power outlet firmly. Failing to do so may cause fire. Do not unplug the power cord by pulling only the cable. If the cord is damaged, this may cause electric shock. Safety Precautions 6 Do not bend the power cord excessively and do not place heavy objects on the power cord. Keep the power cord out of the reach of infants and pets. A damaged cord may cause electric shock or fire. Use a wall outlet or multi-tap with a grounding port. Failing to do so may cause electric shock. If water or another substance comes into contact with the power input jack or into the computer, disconnect the power cord and contact a service center. Damage to the device within the computer may cause electric shock or fire. Keep the power cord and power outlet clean. Failing to do so may cause fire. Use Related Do not place a cup or container filled with water or chemicals over or near the com-

puter. If water or chemicals come into contact with the computer, it may cause fire or electric shock. When dropping the computer or the computer is broken, disconnect the power cord and contact a service center for a safety check. Using a broken computer may cause electric shock or fire. Avoid direct sunlight when in an air-tight location such as inside a vehicle. The computer may become deformed or fire may be caused by high temperatures. Do not scratch the surface of the LCD with a sharp object such as a knife. THE LAMP(S) INSIDE THIS PRODUCT CONTAIN MERCURY AND MUST BE RECYCLED OR DISPOSED OF ACCORDING TO LOCAL, STATE OR FEDERAL LAWS. For details see lamprecy-

cle.org, eise.org, or call 1-800-Samsung. Upgrade Related Never disassemble the power supply or AC adapter. There is a danger of electric shock. Use only authorized parts (multi-bay, battery and memory) and never disassemble parts. There is a danger of damage to the product, electric shock or fire. Custody and Movement Related Follow the instructions of the relevant location (e.g. airplane, hospital, etc.) when using a wireless communication device (wireless LAN, Bluetooth, etc.). Safety Precautions 7 Caution Installation Related Do not block the ports (hole), vents, etc. of the product and take care not to insert any alien substances into the product. Damage to the device within the computer may cause electric shock or fire. Do not place heavy objects over the product, as this may cause a problem with the computer. In addition, the object may fall and cause injury or damage the com-

puter. Battery Use Related Dispose of worn-out batteries properly. Failing to do so may cause fire or an explosion. Follow the proper disposal method relevant to your region. The battery disposal method may differ depending on your location. Dispose of the used battery in the appropriate way. Do not throw or disassemble the battery, as this may cause injury, fire or an explo-

sion. Use only batteries authorized by Samsung Electronics. Failing to do so, may cause an explosion. Avoid contact with metal objects such as car keys or clips when storing or carrying a battery. Contact with metal may cause excessive current and a high temperature and may damage the battery or cause fire. Change the battery according to the instructions in the manual. Failing to do so may damage the product. Do not place the battery into a fire or heat it, as there is a danger of fire or explosion. Safety Precautions 8 Use Related Do not place a candle, lighted cigar, etc. over the product. There is a danger of fire. Make sure that the product is tested by a service engineer after repairing the prod-

uct. Using a repaired product without a safety test might cause electric shock or fire. In case of lightning, immediately turn the system off and disconnect the power cord from the wall outlet, as there is a danger of electric shock or fire. Connect only permitted devices to the connectors or ports of the computer. Failing to do so may cause electric shock or fire. When the computer is used for a long time, an odd smell may arise. Ventilate the room frequently and use the computer carefully. Do not press the Eject Button while the CD-ROM drive is operating, as this might cause data to be lost. The disk may suddenly eject and cause injury. When using a walkie-talkie, please keep a distance of at least 1m between the walkie-talkie and the computer. Since a walkie-talkie's transmission power is very high, this may cause the computer to malfunction. Avoid dropping the product while using it. Dropping the product may damage the product or cause data loss. Take care not to drop the product when using the computer on the stand. Do not touch the antenna and power outlet, as there is a danger of electric shock. Upgrade Related Take care when touching the product or any of the parts, as this may damage the device or cause injury. Take care not to drop any computer part or device. Dropping a device or part may cause injury, or damage the product. Use parts authorized by Samsung Electronics only. Failing to do so may cause fire or damage the product. To connect a device that is not manufactured or authorized by Samsung Electron-

ics, ask at a service center before connecting the device. Failing to do so may damage the product. Safety Precautions 9 Custody and Movement Related When moving the product, turn the power off and separate all connected cables first. Failing to do so may damage the product or cause users to trip over the cables. Keep the Stylus Pen out of the reach of children. Children may injure themselves by swallowing it or damaging their eyes. Use a computer cleansing solution when cleaning the product. Using a cleansing solution or chemical not explicitly developed for computer use may damage the product. Do not use or watch the computer while driving a vehicle, as this may cause a traf-

fic accident. Concentrate on driving. Avoiding Data Loss (HDD Management) Avoid damaging the data on a hard disk drive. A hard disk drive is extremely sensitive to external impact and may cause data loss on the surface of the disk. The company is not liable for any loss of user data due to a user's carelessness or any external impact. Possible causes of data loss of a hard disk drive. Data may be lost due to an external impact to the disk while disassembling or assembling the computer. Data may be lost when the computer is turned off or reset by a power failure while the hard disk drive is in operation. Data may be lost if the power is turned off while running a program. Moving the computer or any impact caused to it while the hard disk drive is in operation, may damage the data on the hard disk drive. To prevent data loss due to damage to the hard disk drive, please backup your data frequently. Safety Precautions 10 Maintaining a Proper Posture While Using the Computer Maintaining a proper posture while using the computer is very important for avoiding physical discomfort or even harm. The following instructions are about maintaining the proper posture while using the computer de-

veloped through human engineering. Please read and follow the instructions carefully for when using the computer. Failing to do so may increase the probability of RSI (Repetitive Strain Injury) through repeated op-

erations may increase and serious physical bodily harm may result. The recommendations (System specification, applied within the coverage of general users. If users are not included in the coverage, the recommendations are to be applied according to the user's needs. p.125) have been prepared so that they can be Proper Posture Do not use the computer on your lap or close to your skin for long periods. There is a danger of burns due to the high temperature of the computer. To use the computer while talking over the telephone, use the ear-microphone phone. When using the computer while holding a phone over your shoulder and talking on the phone, your posture becomes bad. Keep frequently used work items within an easy working range (where they can easily be reached). Eye Position Keep a distance of at least 50cm between the LCD and your eyes. Adjust the height of the LCD screen so that its top height is equal to or lower than your eyes. Avoid setting the LCD excessively bright. Keep the LCD screen clean. When wearing glasses, clean them before using the computer. Hand Position It is recommended connecting and using an external keyboard and mouse when using the computer over long periods. Do not hold the Stylus Pen with excessive force. Do not press the touch screen with excessive force. Maintaining a Proper Posture While Using the Computer 11 Volume Control (Headphones and Speakers) Check the volume level before listening to music. Check if the volume level is too high before using the headphones. Do not set the volume to the maximum from the beginning. Set the volume low and find a comfortable level while turning it up. Do not use the headphones for long periods of time. Usage Time (Break Time) When working for more than one hour, take a 10 minute break after every 50 minutes of work. Using this computer for two hours or less a day is recommended. Illumination Do not use the computer in a dark environment. The illumination level for computer use must be as bright so when reading a boo. Indirect illumination is recommended. Use a curtain to prevent the reflection of the LCD screen. Operating Conditions Do not use the computer in hot and humid locations. Use the computer within the allowed temperature and humidity ranges specified in the User Guide. Maintaining a Proper Posture While Using the Computer 12 Chapter 1. Getting Started Overview Front View / Status Indicators Top View Right View Left View Rear View Turning the Computer On and Off Turning the computer on Turning the computer off 14 14 15 16 16 17 18 18 18 Overview Before Starting!

The actual appearance and color of the contents may differ from the pictures used in the mate-

rial. Front View / Status Indicators z LCD x Mono Speaker c Joystick v Auto Scaler Button

, Quick Launch Button m Enter Button n Menu Button b Status Indicators z LCD x Mono Speaker c Joystick The screen images from the computer are displayed here. A device generating sound. One speaker is at the top left of the computer. Plays the same role as the direction keys ( , , , ) on the keyboard. Used as a joystick when playing games. v Auto Scaler Button (Automatic Resolution Adjustment Button) Press this button to change the screen resolution. Auto Scaler provides 3-step resolutions. Whenever you press this button, the screen resolution changes to 800x480 (Default Resolution) > 800x600 > 1024x600 sequen-

tially. (

p.30) b Status Indicators Shows the operating status of the computer. The corresponding operating LED is lit when the corresponding function operates. (

p.15) n Menu Button m Enter Button

, Quick Launch Button Press this button to launch the Menu Program. (

The Menu Program provides shortcuts to frequently used functions on the computer. You can easily change the settings. p.27) Press this button to select an item. It is the same as the Enter key on the keyboard. You can register a frequently used program to launch it just by pressing this button.

(

p.28) Overview 14 Status Indicators z HDD v Power Status x Wireless LAN c Charge Status This turns on while the hard disk drive is being accessed. This turns on when the wireless LAN is operating. (

p.45) This shows the power source and the battery charge status. Green: When the battery is fully charged or the battery is not installed. Amber: When the battery is being charged. Blinks: It blinks for a while when sliding the HOLD switch up or when pressing a button when the HOLD switch is in the HOLD position. Off : When the computer is running on battery power without being connected to AC power. This shows the computer operating status. On : When the computer is operating. Blinks: When the computer is in Standby mode. z HDD x Wireless LAN c Charge Status v Power Status Top View z Windows Security Button v Vents b Stylus Pen / Stylus Slot x Volume Control Button c Power Switch / AVStation NOW Switch z Windows Security Button x Volume Control Button c Power Switch /

AVStation NOW Switch Pressing this button is the same as pressing the <Ctrl>+<Alt>+<Del> keys on the keyboard. Press the Stylus Pen, display the Windows Task Manager window. A button used to control the volume. (

p.26) You can turn the computer on or off by sliding this switch to the right and releasing it. (

p.18) You can launch AVStation NOW by sliding this switch to the left when the computer is turned off. (

p.79) To turn the computer on, slide the Power switch to the right and hold it for more than 0.1 seconds before releasing it. v Vents The internal heat of the computer is emitted through these holes. If the vents are blocked the computer may over-heat. This may be danger-

ous, so avoid blocking the vents. b Stylus Pen /

Stylus Slot The Stylus is used to enter information through the touch screen. (

You can keep the Stylus Pen in the Stylus Slot. p.20) Overview 15 Right View z Monitor Port A jack used to connect a monitor, TV or projector supporting a 15-pin D-SUB inter-

face. (

p.31) z x USB Port A port used to connect a USB device such as a USB keyboard, mouse, etc. c DC-in Jack A port used to connect the AC adapter supplying power to the computer. x c Left View z x c v b n z External ODD Power Port A port used to supply power to the external USB ODD. x USB Port A port used to connect a USB device such as a USB keyboard, mouse, USB ODD, etc. c Headphone Jack A jack used to connect the headphones. v MIC Jack The jack for connecting a microphone. b HOLD Switch When sliding the HOLD switch into the HOLD position (upwards), no buttons will work. When pressing a button or switch in the HOLD status, the Charge LED (

blinks for a moment.

) To use the computer again, slide the HOLD switch down. n Hand Strap Hole You can connect the Hand Strap here. Overview 16 Rear View z 20 Stand x 80 Stand c Battery Latch v Battery z 20 Stand x 80 Stand c Battery Latch v Battery You can position the computer at a 20 degree angle so that you can comfortably enter text. You can position the computer at an 80 degree angle so that you can comfortably view the screen. The latch used to remove or install the battery. (

p.96) A Lithium Ion rechargeable battery which supplies power to the computer. (

p.96) Overview 17 Turning the Computer On and Off Turning the computer on 1 Install the battery and connect the AC adapter. (Refer to the Getting Started Guide.) 2 Adjust the stand at the back of the computer to a comfortable angle. 3 Slide the Power Switch to the right, hold it for more than 0.1 seconds and then release it. The computer is turned on. When running the computer on battery power, the LCD brightness is automatically dimmed to save battery power. Press the Menu button and then Brightness Up or Brightness Up to adjust the LCD brightness.

(

Alternatively, press the + or - Volume Control buttons at the top of the computer while holding down the Menu button to adjust the LCD brightness. p.27). Turning the computer off 1 Click the start button (

2 Click Turn Off Computer.

) on the taskbar. 3 Click Turn Off. When the system cannot be shut down due to a system error, turn it off by sliding and holding the Power Switch for more than 4 seconds. After that, when turning it on by sliding the Power Switch, the disk checking program may launch. Turning the Computer On and Off 18 Chapter 2. Using the Computer Stylus Pen Entering Text Using the Tablet PC Input Panel Entering text using the Dialkeys Volume Control Using the Buttons The Menu Button The Quick Launch Button The Auto Scaler Button Using an external Monitor Connecting a Monitor Viewing on a Monitor Dual View 20 22 22 25 26 27 27 28 30 31 31 31 32 Stylus Pen A Stylus Pen instead of a mouse is supplied with the computer and provides the same function. Before Starting!

It is recommended connecting and using a USB keyboard and mouse when using the computer over long periods. Removing the Stylus Pen from the computer Pull the Stylus Pen upwards and out. When finished, return it to the Stylus Slot. Stylus Pen Functions Mouse Stylus Pen Function Single-click Single-tap Single-tap with the pen to select an item. Double-click Double-tap Double-tap with the pen to run an item. Right-click Press and Hold Press and hold for more than 3 seconds with the pen to display the Pop-up menu. Drag Drag Press an item and drag it with the pen to move the item. Learning How to Use the Stylus Pen Select Start > Get Going with Tablet PC to learn how to use the Stylus Pen. (

p.35) Operate the touch screen LCD with a Stylus Pen or your finger. Sharp objects may scratch or damage the LCD surface. Stylus Pen 20 Calibrating the Stylus Pen When using the Stylus Pen for the first time or the pointing position of the Stylus Pen is incorrect, you can correct the pointing position using the TouchKit program. 1 Select Start > All Programs > Touchkit > Configure Utility. 2 In the Tools tab, select 4 Points Calibration. Enhancing the Accuracy If greater precision is required, you can correct the pointing position by using 9-Points or 25-

Points Calibration. To setup 9-Point or 25 Point Calibration, follow these steps:

z Before beginning with the Calibration, click on the Settings tab in the TouchKit. x In the Linearization Style item in the Settings tab, select 9-Points or 25-Points and then press the Apply button. c To calibrate, click the Tools tab. v x Select Linearization from the Tools tab. The higher the number, the more precise the correction. 3 Press and hold the X-symbol displayed on the screen until it stops blinking. The X-symbol appears repeatedly according to the selected number of points. 4 If the Calibration Result window appears, click the OK button. The pointing position of the Stylus Pen is corrected. Stylus Pen 21 Entering Text You can enter text by using the Tablet PC Input Panel or the DialKeys on-screen keyboard. Before Starting!

Using a USB keyboard and Notepad is more convenient than using the Tablet PC Input Panel or the Dialkeys when entering large amounts of text. For example, to enter texts in Notepad, select Start > All Programs > Accessories > Note-

pad and run Notepad. Using the Tablet PC Input Panel The Tablet PC Input Panel is an on-screen letter input pad provided by Windows. Letters can be entered with the Stylus Pen when a keyboard is not available. There are three ways in which letters can be entered using the Tablet PC. Input Panel: with the Writing Pad, with the Character Pad, and with the On-Screen Keypad. To open the Tablet PC Input Panel, click on the Tablet PC Input Panel (

A picture of the Tablet PC Input Panel is displayed below.

) icon on the taskbar. Writing Pad Character Pad On-Screen Keyboard Tablet PC Input Panel icon Close Tools and Options Help You can learn detailed usage for the Tablet PC Input Panel. Entering text using the Writing Pad The Writing Pad converts text written with the Stylus Pen into electronic text. To use the Writing Pad, follow these steps:

1 Open the Tablet PC Input Panel and an editing program. 2 In the Tablet PC Input Panel, click the Writing Pad icon (

3 Enter text into the input area of the Writing Pad using the Stylus Pen and wait a moment. The

). written letters are converted into the corresponding computer characters. Entering Text 22 4 Press the Insert button to enter the converted letters. Insert Editing Letters Write over incorrect letters or press the lower part of a letter to select another letter from the displayed letters. Entering text using the Character Pad The Character Pad is divided into cells separated by lines. Text entered with the stylus pen into each cell is converted into electronic text. To use the Character Pad, follow these steps:

1 Open the Tablet PC Input Panel and an editing program. 2 In the Tablet PC Input Panel, click the Character Pad icon (

3 Write a letter in the cell of the Character Pad with the Stylus Pen and wait a moment. The writ-

). ten letter is converted into the corresponding computer character. Entering Text 23 4 Press the Insert button to enter a converted letter. Insert Entering text using the On-Screen Keyboard The On-Screen Keyboard displays a standard keyboard on the screen. Text is entered by pressing the corresponding keys on the screen. To use the On-Screen Keyboard, follow these steps:

1 Open the Tablet PC Input Panel and an editing program. 2 In the Tablet PC Input Panel, click the On-Screen Keyboard icon (

3 Select letters using the Stylus Pen.

). Entering Text 24 Entering text using the Dialkeys DialKeys is an on-screen keyboard designed to be used with compact touch screen computers. You can enter letters using the DialKeys by pressing key on the screen with your thumbs while holding both of the lower corners of the computer with your hands. To launch the DialKeys for the first time, click Start > All Programs > Microsoft Touch Pack for Tablet PC > DialKeys. You can launch the DialKeys as follows after the first launch. To use DialKeys, Follow thexe steps:

1 Click on the Dialkeys icon (

2 Select Show/Hide DialKeys from the pop-up menu.

) on the taskbar. 3 Open an editing program. 4 The Dialkeys appears on both lower corners of the screen. Enter letters using your thumbs. Corresponds to the Enter key on a keyboard. Corresponds to the space bar on a keyboard. Minimizes the Dialkeys. Corresponds to the Backspace on a keyboard. Move the current window upwards. To View Detailed Usage of the Dialkeys Click on the Dialkeys icon (

the pop-up menu.

) on the taskbar for more than 3 seconds and select Help from Entering Text 25 Volume Control You can control the volume with the Volume Control button or Volume Control program. Controlling the Volume Using the Volume Control Button Press the right side (+) of the Volume Control button (

the left side (-) to turn the volume down.

) to turn the volume up and press Using the Volume Control Program Click on the Volume icon (

) on the taskbar and slide the volume bar up or down. Alternatively, double-click on the Volume icon (

) and adjust the master volume control. Volume Control 26 Using the Buttons The procedures to use the Menu, Quick Launch and Auto Scaler buttons are described below. The Menu Button (

Press the Menu button to launch the Menu Program. The Menu Program provides shortcuts to fre-

quently used functions on the computer. You can easily change the settings.

) Press the Menu button again or press a point on the screen to hide the Menu Program. Menu Items Brightness Up Function This increases the LCD brightness by one step. Brightness Down This decreases the LCD brightness by one step. Wireless LAN ON (OFF) Turns the Wireless LAN on or off. Sound ON (OFF) Turns the volume on or off. Backlit OFF Turns the LCD backlight off. Press a point on the screen once to turn it on again. Etiquette Mode ON (OFF) You can select Etiquette Mode for a tranquil work enviornment. Using the Buttons 27 LCD/CRT Press the item to view screen images on an external monitor. When pressing this item once, screen images are displayed on the LCD. When pressing this item twice, screen images are displayed on both the LCD and the CRT (external monitor) simultaneously. CRT Output Only is not supported. Battery Shows the remaining battery charge. Rotation Whenever this item is pressed, the screen rotates by 90 degrees to the left. When rotating the screen, a part of the screen image may not be dis-

played in some software programs. The Quick Launch Button You can register a frequently used program, and launch a program just by pressing this button. The procedures to change the default settings are described below. Default Setting The Quick Launch button is defined as follows by default. Button Function Description u1 u2 u3 u4 Mouse Scroll Up Scrolls up in the current window. Back Moves to the previous page in Internet Explorer or Windows Explorer. Mouse Scroll Down Moves to the next page in Internet Explorer or Windows Explorer. Scrolls down in the current window. Forward Scrolls down in the current window. Using the Buttons 28 Changing the Settings The procedures to change the default settings are described below. 1 Double-click the Magic Keyboard icon (

2 Click the add button. 3 Enter a name in the Group Name field and select a shortcut key in the Select Shortcut Key field. 4 Select the Run Program option, click the Browse button, select a program to be launched

) on the taskbar. and click the Open button. Example) C:\Program Files\Internet Explorer\IEXPLORE Select a program and click the Apply button. Keyboard Effect Function A Keyboard Effect Function is used to simulate key combinations that are difficult to enter using the Tablet PC Input Pad. For example, to simulate the Ctrl+C key combination by pressing the u2 button, select Key-

board Effect, select Ctrl+C and click Apply. 5 Click OK to finish the setting. Using the Buttons 29 The Auto Scaler Button The default resolution of this computer is 800x480 pixels. In the default resolution, the complete screen image of programs designed for high resolutions may not be displayed properly. In this case, press the Auto Scaler button(Automatic Resolution Adjustment Button) on the left side of the computer and select a higher screen resolution. When pressing the Auto Scaler button, the Auto Scaler menu appears. Whenever this button is pressed, the screen resolution changes between 800 x 480 (Default Resolution) > 800 x 600 > 1024 x 600 sequentially. Example) Selecting a 800 x 480 pixels resolution Example) Selecting a 800 x 600 pixels resolution The Auto Scaler button provides a function that fits high resolution screen images to the screen size and does not support all resolutions supported by the graphics chipset. To select a resolu-

tion, which is not supported by Auto Scaler, use the Display Properties. (

p.43) Using the Buttons 30 Using an external Monitor Using an external display device is useful when giving a presentation or watching a movie. Connecting a Monitor Open the Monitor OUT port cover by pulling the cover and connecting a monitor. Viewing on a Monitor 1 Press the Menu button. 2 Press the LCD/CRT item once to display screen images on the LCD screen. When pressing the item twice, you can view screen images on both the LCD and CRT screens simultaneously. LCD: Computer Screen CRT: External Monitor Screen Outputting to CRT only is not supported. Using an external Monitor 31 Dual View Dual View is a function that enables a computer screen to be viewed over two display devices. The Menu button does not support Dual View mode. You have to use Windows 'Display Properties'

to use Dual View. When using Dual View, use a USB mouse. Using a mouse to move between screens is convenient. You cannot move between screens using the Stylus Pen. Using Dual View to View an Extended Screen Check if an external display device has been properly connected and configure Dual View. 1 Select Start > Control Panel > Appearance and Themes > Display. 2 Click the Settings tab. 3 Click the monitor '2' icon, select the 'Extend my Windows desktop onto this monitor'

check box and click Apply and then the OK button. 4 If the LCD is set as the primary display device, the primary display device (the LCD) is indicated as '1', and the secondary display device is indicated as '2'. Now you can view the screen through two monitors. Using an external Monitor 32 It is recommended setting the LCD screen as the primary device ('1') when using Dual View. If the screen of the secondary display device is displayed at 640x480 pixels with 256 colors, select Start > Control Panel > Appearance and Themes > Display > Settings tab >

Monitor 2 and change the settings to the desired screen resolution and color quality. To Move a Window between Monitors in Dual View Mode Click and hold a window title bar on the primary display device ('1') with the mouse and drag the window title bar to the secondary display device ('2') to move the window. Deactivating Dual View Mode 1 Select the Start > Control Panel > Appearance and Themes > Display > Settings tab. 2 Click the monitor '2' icon, unselect the 'Extend my Windows desktop onto this monitor'

check box and then click Apply. Using an external Monitor 33 Chapter 3. Using Microsoft Windows XP About Microsoft Windows XP Get Going with the Tablet PC Tablet PC Tutorials Reinstalling Windows XP The Windows XP Screen Layout Desktop Understanding the Start Menu Understanding a Window Control Panel Opening the Control Panel User Account Changing the Resolution and Colors 35 35 36 36 37 37 38 39 40 40 41 43 About Microsoft Windows XP The Microsoft Windows XP Tablet PC Edition (hereafter, Windows) operating system is installed on this computer. The Microsoft Windows XP Tablet PC Edition is an operating system based on Microsoft Windows XP Profes-

sional. Additional features for the tablet PC, such as a hand-writing recognition function, have been added. You can learn elementary functions for using this PC through the Get Going with Tablet PC and Tablet PC Tutorials. The computer has adopted touch screens so that you can operate the computer with your hands and does not accord completely with the characteristics of a typical tablet PC. In addition, since a Stylus Pen is provided instead of a Tablet Pen, the Tablet and Pen Settings provided by the Windows XP Tablet PC Edition are not completely supported by the Pen Op-

tions. To calibrate the Pen, use the Touchkit program. (

p.21) Get Going with the Tablet PC Select Start > All Programs > Get Going with Tablet PC. The Welcome to Tablet Computing screen appears. Click Start to learn how to use your tablet PC. About Microsoft Windows XP 35 Tablet PC Tutorials You can tour elementary functions of your tablet PC and learn how to hand-write on the Writing Pad through the Tablet PC Tour. The Tablet PC Tutorials only supports the 1024x768 pixels resolution. Before running the Tutorials, select the Start > Control Panel > Appearance and Themes

> Display > Settings tab and change the screen resolution to 1024x768 pixels. Select Start > All Programs > Tablet PC > Tablet PC Tutorials. The Tablet PC Tour screen appears. Click Next to learn how to perform 'Note Writing', 'Entering texts with the Tablet PC Input Panel', etc. Reinstalling Windows XP If Windows cannot be started up due to damage to the system or errors frequently occur, you can reinstall Windows using the System Recovery Media (DVD). (

p.110) You can use the system recovery media by connecting the external USB ODD to the system. About Microsoft Windows XP 36 The Windows XP Screen Layout The screen layout of Windows XP Tablet PC Edition is the same as that of Windows XP. Desktop The desktop is the working area on the computer. It consists of a large workspace and a taskbar at the bottom as shown in the figure below. z Start x Tablet PC Input Panel c Taskbar v System Tray with Clock z Start Opens the Start menu. x Tablet PC Input Panel The Input Pad used to enter letters. c Taskbar Programs currently running are displayed here. v System Tray with Clock Displays some program icons that are currently running. Infrequently used icons are hidden. Clicking the left arrow icon, displays hidden icons. The Windows XP Screen Layout 37 Understanding the Start Menu The Start menu includes everything required to start Windows. From the Start menu it is possible to run a program, open a file, assign system users with the Control Panel, receive support by selecting Help and Support, and search for items on the computer or on the Internet by selecting Search. Frequently used programs All Programs Start Button My Computer Control Panel Help and Support My Computer Displays the contents of the hard disk, the CD-ROM drive, the network drive(s), and floppy disks. It can also be used to search and open files and folders. Control Panel Enables users to configure settings on the computer. Help and Support Search Run Provides on-line help, information on Windows and troubleshooting. Enables users to search for information in files or the Internet. Runs programs or documents. The Windows XP Screen Layout 38 Understanding a Window A window is the basic display component of Windows computers. The My Computer window, which displays information on the computer's hard drive, will be used as an example to show the basic composition of a window. Click Start > My Computer. Title Bar Tool Bar Quick Task Window Menu Bar Minimize Button Maximize Button Close Button Folder Icon Drive Icon

(Storage Device) Double-click the hard drive (local disk) to view the folders and files stored on in it. If the contents do not appear, click Show the contents of this folder. What is a drive?

A storage device on which files and folders are saved in, and read from. What is a folder?

A folder is used to group and manage files systematically, and may include files in sub-folders. It is similar to a filing cabinet. What is a file?

A file is a document or a collection of various kinds of data generated as a result of program operation. To view the entire structure of the drive Click the Folder icon in the taskbar to view the entire structure. Click the icon again to return to the Quick Task Window. The Windows XP Screen Layout 39 Control Panel The Control Panel contains tools to configure Windows. Opening the Control Panel Select Start > Control Panel. Icon Name Function Appearance and Themes Network and Internet Connections Add or Remove Programs Changes the appearance of Windows. This function is used to change the Desktop, apply a theme and a screen saver to the computer, and change the Start menu and Taskbar. This function is used to configure the network settings or configure and add Internet connections. This function is used to add remove a program from Windows. Sound, Speech and Audio Devices This function is used to adjust the volume, select a sound scheme, and set up the speakers. Performance and Maintenance This function is used to configure the Windows performance options. In addition, you can manage the hard disk drive and hardware. Printers and Other Hardware This function is used to add or configure a printer, mouse, keyboard, scan-

ner, camera, or gaming device, etc. User Accounts This function is used to add or set up a Windows XP user account. Date, Time, Language and Regional Options This function is used to configure the date, time, language, and regional settings. Accessibility Options This function is used to select options for disabled persons and people with bad vision. Security Center This function is used to check the current security status to protect a user's computer and configure the security settings for the firewall, virus anti-

virus program, etc. Control Panel 40 User Account Windows XP allows multiple user to use a computer with their own user account. The procedures to add a user account and switch between user accounts are described below. Adding a User Account 1 Select Start > Control Panel. 2 Double-click User Accounts and click Create a New account. 3 Click the Tablet PC Input Panel icon, enter a name and then click the Next button. 4 Select an account type, click Create Account, and then check the newly created account in the user account screen. If you cannot see the bottom of the screen, press and drag the scroll bar of the window with the Stylus Pen. 5 To change the user account information, click on account to be changed. You can change the account name, password, type and picture. Control Panel 41 Deleting a User Account 1 Select Start > Control Panel > User Accounts. 2 Click on user account to be deleted and click Delete Account. You cannot delete a currently logged in user account. Switching Users 1 Select Start > Log Off. 2 Click Switch User. 3 Click on user account to login to the Start screen. Login with a new user account. Control Panel 42 Changing the Resolution and Colors The resolution means the number of pixels displayed on the screen. When selecting a higher reso-

lution, items on the Desktop become smaller and more items can be displayed on the screen. The color quality can also be configured. The higher the color quality, the more colors are displayed on the screen. To change the screen resolution or color quality, follow these steps:

1 Select Start > Control Panel > Appearance and Themes > Display. 2 Click on Settings and change the Screen Resolution and Color Quality. 3 Click OK. You can check your graphics chipset. To set the color quality, select a color quality in the Color quality field. To set the resolution, slide the resolution slide bar to a desired resolution in the Screen resolution field. If the 800x480 resolution is not available When selecting the 800x600 or 1024x600 resolution by pressing the Auto Scaler button, the 800x480 resolution may not appear in the Display Properties window. In this case, press the Auto Scaler button and select the 800x480 resolution. About the 1024X768 Pixels Resolution The 1024x768 pixels resolution is also fits to the screen size. You can select the 1024X768 pixels resolution by selecting the Start > Control Panel > Appearance and Themes > Display >

Setting tab. Control Panel 43 Chapter 4. Using the Network Connecting to a Wireless LAN Connecting to an Access Point (AP) Connecting to computer-to-computer networks (peer-to-peer or ad hoc) Setting up a Wireless Network Setup Using the Wireless LAN Setup Program Using Samsung Network Manager Setting Up a Network Accessing a network from a different location Network Status Diagnosis Using Bluetooth Devices Bluetooth Software Setup Using Bluetooth 45 46 47 50 51 51 54 54 55 56 58 Connecting to a Wireless LAN (Optional) A wireless network (Wireless LAN) environment is a network environment that enables communication be-

tween multiple computers using wireless LAN devices. Using the wireless network connections between computer systems, you can use normal network functions such as sharing of files, folders and printers. A wireless LAN card is optional. The model of the wireless LAN card is determined by the relevant product. To view the installed wireless LAN card, click Start > Control Panel > Performance and Mainte-

nance > System > Hardware tab > Device Manager. The wireless LAN connection settings are described on the basis of a Windows XP Service Pack 2 installed computer. It is recommended using the default settings provided by Windows XP as the wireless LAN set-

tings for Windows XP installed computers. To setup the wireless card using the software supplied by the wireless LAN card manufacturer, refer to "Setting up a Wireless Network Setup Using the Wireless LAN Setup Program" (p50). To use the Wireless LAN, the Wireless LAN must be turned on. Press the Menu button and press the Wireless LAN ON item to turn it on. If the Wireless LAN is turned on, the Wireless LAN LED (

) is lit up. Wireless Network Connection Types Wireless network connections can be classified into two categories. 1) Access Point (AP) You can connect to an AP to use the network. This is only possible in an environment equipped with an AP. For details, see Connecting to an Access Point (AP) on page 46. What is an Access Point (AP)?

An AP is a network device that bridges wired and wireless LANs, and act a s a wireless hub. You can connect multiple wireless LAN installed computers to an AP. 2) Computer-to-computer (ad hoc) This is also called a peer-to-peer network. In computer-to-computer wireless networks, you can wirelessly connect 2 or more computers that have wireless LAN modules. For details, see Connecting to computer-to-computer networks (peer-

to-peer or ad hoc) on page 47. Connecting to a Wireless LAN (Optional) 45 Connecting to an Access Point (AP) This section describes how to connect to an AP. You can access the network when you are connected to an AP. For more detailed information, about your network, such as the network key (encryption key), ask your network administrator. To connect to an AP, follow these steps:

1 Right-click(press and hold the Stylus Pen for more than 3 seconds) on the Wireless Network Connections (

) icon on the taskbar, and select View Available Wireless Networks. 2 Select an AP (E.g. see the Test network diagram below) to connect to and click Connect. If there is a configured network key for the AP, the Enter Network Key window appears. Enter the Network Key and click the Connect button. When on network key is defined for a selected AP, click on Link to display the warning message box. Then click on Connect again in the box. Now when Connected is displayed in the right corner of the AP information window, you can access the network. Checking the connection status Move the mouse pointer over the Wireless Network Connection (

play the connection status.

) icon on the taskbar to dis-

Connecting to a Wireless LAN (Optional) 46 Connecting to computer-to-computer networks (peer-to-peer or ad hoc) In computer-to-computer wireless networks, you can connect two or more computers that have wireless LAN modules. Using this method, a computer that is not connected to the Internet can ac-

cess the Internet through another computer connected to the Internet. You can connect by completing the following steps:

Step 1. Set up a computer-to-computer network on a computer. Step 2. Connect to the configured computer from other computers. Step 1. Setting up a computer-to-computer network 1 Right-click(press and hold the Stylus Pen for more than 3 seconds) on the Wireless Network Connection (

) icon on the taskbar, and select View Available Wireless Networks. 2 Click Change the order of Preferred Networks. 3 In the Wireless Network tab, click Advanced. 4 Make sure the 'Automatically connect to non-default network' checkbox is not, selected. Select 5 In the Wireless Networks tab, click Add.

'Computer-to-computer (ad hoc) networks only', and click Close. Connecting to a Wireless LAN (Optional) 47 6 Enter the network name (e.g. samsung), and unselect 'The key is provided for me automatical-

ly'. Enter the encryption key in the Network key field, and click OK. To prevent a network access from unauthorized user, it is better to configure a network key (en-

cryption key). A network key consists of 5 ~ 13 alphanumeric characters (e.g. magic), or of 10

~ 26 hexadecimal numbers (a hexadecimal number is represented by the numbers '0' to '9' and the letters 'a' to 'f'). 7 Check that the configured network name (e.g. samsung) is in the Preferred networks item, and click OK. Now your wireless network setup has been completed. Connecting to a Wireless LAN (Optional) 48 Step 2. Connecting to the configured computer 1 Right-click(press and hold the Stylus Pen for more than 3 seconds) on the Wireless Network 2 Select the wireless network name (e.g. samsung) specified in Connecting to computer-to-com-

) icon on the taskbar, and select View Available Wireless Networks. Connection (

puter networks (peer-to-peer or ad hoc) on page 47, and click Connect. 3 Enter a cryptographic key in the network key box and click Connect. If the network key is not configured in Connecting to computer-to-computer networks (peer-to-

peer or ad hoc) on page 47, just click Connect, without any keystrokes. When connected to the wireless network, the system displays Connected in the selected net-

work of the Network Connection window. Checking the connection status Move the mouse pointer over the Wireless Network Connection (

display the connection status is displayed.

) icon on the taskbar, to Connecting to a Wireless LAN (Optional) 49 Setting up a Wireless Network Setup Using the Wireless LAN Setup Program The procedures to connect to an access point using a wireless LAN configuration program are de-

scribed below. Since the wireless LAN configuration program is included on the System Software Media, the user has to install the program. Before Starting!

To use the system software media, the external USB ODD must be connected to the computer. The following descriptions presuppose that the external ODD is connected. 1 Insert the System Software Media into the CD drive and install the wireless LAN configura-

tion program (ACU: Atheros Client Utility). Select System Software Media > User Installation > Wireless LAN Driver ReadMe, click ReadMe and install the program according to the instructions. 2 Right-click( press and hold the Stylus Pen for more than 3 seconds) on the wireless LAN con-

figuration program (

Alternatively, click Start > All Programs > Atheros Client Utility > Atheros Client Util-

ity.

) on the taskbar and select Open Atheros Client Utility. 3 In the Profile Management tab, click Scan to search for available wireless networks. 4 Select the name of an access point (AP) to connect to from the network name (SSID) and then 5 Enter a profile name to be used for the connection and select the security settings of the AP to click Activate. be connected to in the Security tab. The network authentication, encryption type and password of an access point are configured through the access point management program. For the security information, check the security settings of an access point or ask your wireless network administrator. Refer to the following when configuring a WEP key. Data encryption (WEP): The IEEE 802.11 WEP (Wired Equivalent Privacy) standard defines two levels of encryption, a 64-bit key (this is sometimes represented by 40bits) and a 128-bit key. When connecting to an Atheros access point, you can use the 152-bit key (32 hexadecimal digits or 16 ASCII characters). Key index: Select the current encryption key index used by the access point from between Using an encryption key: Enter 5 (for 64-bit) or 13 (for 128-bit) alphanumeric characters 1 to 4.

(represented by 0-9, a-z, or A-Z). 6 Click OK and then OK again in the Profile Management window. If the profile is created, the profile appears in the list in the Profile Management tab and the connection is established using the profile. Connecting to a Wireless LAN (Optional) 50 Using Samsung Network Manager Samsung Network Manager is a program that helps configure the network settings. Samsung Network Manager provides the following features. You can easily configure the network and printer settings. You can immediately use the network without defining new network settings again after moving locations. By setting the network settings (IP address, printer settings, etc.) for each location, you can im-

mediately access the network without following network setting procedures each time regard-

less of your location. You can diagnose the network status. You can diagnose the network status when the network is not properly connected. Setting Up a Network The setup procedures include the procedures to add a printer to the network. Before Starting!

Before configuring the network settings, click the Auto Scaler button and set the resolution to 800 x 600 or 1024 x 600 pixels. At the default resolution (800x480), the lower part of the software screen may not be displayed. 1 To use a wireless LAN, make sure it is on. Press the Menu button and click the Wireless LAN ON item to turn it on. When the wireless LAN is turned on, the Wireless LAN LED (

) lights up. 2 Run Samsung Network Manager. Select Start > All Programs > Samsung > Samsung Network Manager > Samsung Network Manager or double click the Samsung Network Manager(

Desktop. 3 Click the Add button. You may need to rotate the screen to access the Add button. 4 Select a network location icon and enter the name of the location (e.g. Home). Click the Next

) icon on the button. Using Samsung Network Manager 51 5 Select Internet direct connection and click the Next button. 6 Select the LAN device, configure the IP address, and click the Next button. Select Device Setup IP Address Select Device Select a device to be connected to the Internet. Select Wireless LAN. Setting up the IP Address To allocate an IP address automatically (DHCP), select Get IP Automatically. To use a static IP address, unselect Get IP Automatically and enter an IP address. For the IP address information, ask your network administrator. 7 When the Printer Setting window appears, click Finish. To add a printer, click Add Printer. The Add Printer Wizard appears. Set up the printer accord-

ing to the instructions displayed on the screen. When the printer has been added, click the Show printer button, select the newly added print-

er and then click the Finish button. To not add a printer, select No Default Printer and then click the Finish button. When the network setting is complete, the Do you want to move to newly added location now? message appears. If you select Yes, the network settings for the added location are ap-

plied. When the network settings for the added location are applied, the added place and the correspond-

ing network connection information is displayed in The detailed Information for window. Using Samsung Network Manager 52 When the network setting is complete, an icon for the added location is created within the Saved Locations window. Now you can use the Internet at that location or add a new network location. Menu Current Place Information Saved Locations Wireless LAN AP Connection Procedures To use a wireless LAN, first connect to a wireless LAN AP to access the network even when at a different location. Or moving location and then you can access the network even when connect-

ing to a wireless LAN AP. z Right-click over the Wireless Network Connection (

) icon on the Taskbar and click View Available Wireless Networks. x Click Search AP from the Wireless menu to search for wireless LAN APs. Select an available wireless network (e.g. SAMSUNG) and click the Connect button. For in-

formation on available wireless LAN APs, ask your network administrator. Available AP Connect c The network key (security key) input window appears.

- If a network key has been configured for the wireless LAN AP, enter the network key and click the Connect button. For the network key information, ask your network administrator.

- If no network key has been configured for the wireless LAN AP, click the Connect button without entering the network key. v When the computer is connected to the wireless LAN AP, the Connected message will ap-

pear on the Wireless Network icon in the Taskbar. Using Samsung Network Manager 53 Accessing a network from a different location By configured the network settings (IP address, printer setting, etc.) for each location, you can immedi-

ately access the network without performing the network setting procedures regardless of your location. To access a network you have entered into the Network Manager, follow these steps:

1 Run Samsung Network Manager when connected to the Internet. 2 Select an icon that represents the corresponding location from the Saved Locations window and then click Move. You may need to rotate the screen to click Move. 3 When the network settings of the selected location are applied, the new location and the net-

work connection information are displayed in The detailed Information for window. Network Status Diagnosis You can diagnose the network status when the network is not properly connected. 1 Run Samsung Network Manager. 2 Select Auto Diagnosis from the Manage menu. 3 The Network Connections figure window appears. Click the Start button to start the network 4 When the diagnosis is complete, devices which are out of order are marked by the exclamation diagnosis. mark icon. For detailed device status, read the description at the bottom of the window. Reconnect and set up the device according to the diagnosis result. Using Samsung Network Manager 54 Using Bluetooth Devices (Optional) Bluetooth is a wireless communication technology that allows access to nearby devices such as computers, mobile phones, printers, keyboards or mice without a cable connection. Bluetooth enables file transmis-

sions, Internet access, a private area network function, and access to a keyboard, mouse and printer be-

tween devices supporting the Bluetooth function without a cable connection. Before Starting!

The Bluetooth function is only available between devices supporting Bluetooth (computers, mobile phones, PDAs, printers, etc.), and the function may be restricted depending on the device profile. The Bluetooth function is optional and may not be supported depending on your model. Compatibility with a Bluetooth device not certified by a Bluetooth certification or logo is not guaranteed. Bluetooth Functions File Transmission (

) You can exchange files between 2 Bluetooth devices. You can exchange files with other com-

puters, mobile phones, PDAs, etc. Network Access (

) You can connect to another computer using the Bluetooth function as if accessing a wireless LAN in Ad-Hoc mode or connect to the Internet through an AP or Internet Connecting Sharing Server. Network Access through a Phone Connection (

) You can connect to the Internet through a Bluetooth mobile phone. Data Sync (Synchronization) (

) You can synchronize the PIMS data (Outlook E-mail address data) with mobile phones, PDAs, notebook computers, etc. supporting Bluetooth. Electronic Business Card (Vcard) Exchange (

) You can exchange electronic business cards with mobile phones, PDAs, notebook computers, etc. supporting Bluetooth. Sound Output (

) You can listen to audio from the computer through another Bluetooth device or listen to audio of another Bluetooth device through the computer. HID Connections (

) You can connect a keyboard, mouse, joystick, etc. supporting Bluetooth. To use the Bluetooth function, refer to the online help of the corresponding Bluetooth device. Using Bluetooth Devices (Optional) 55 Bluetooth Software Setup Bluetooth software is installed on computers supporting Bluetooth. For first time use, configure the Bluetooth software as follows. 1 Double-click the My Bluetooth Environment icon (

2 Click the Next button to start the configuration.

) on the Desktop. In the configuration steps, enter a device name to be displayed in the Bluetooth Manager pro-

gram. Enter a Name in the Computer Name field and select Laptop for the Computer Type field. Also, a step appears for selecting the services to be provided by your Bluetooth device for other Bluetooth devices. At this point, the program automatically detects available services and dis-

plays them as selected. It is recommended keeping the default selection. If you change the service settings, the drivers necessary for the additionally selected services are installed. At this point, a warning message may appear informing you that there is no Microsoft logo. Since it does not affect the operation, continue the installation. Using Bluetooth Devices (Optional) 56 3 If the driver installation is complete, the next step proceeds which searches for nearby Blue-

tooth devices. Since you do not have to search while setting up, click the Skip button and finish the settings. 4 If the settings are complete, the My Bluetooth Environment window appears. Using Bluetooth Devices (Optional) 57 Using Bluetooth Describes how to exchange files between computers supporting Bluetooth and how to use other Bluetooth devices. Bluetooth Help Bluetooth Help provides detailed procedures on using Bluetooth functions. Double-click on My Bluetooth Settings on the Desktop and click Help > Bluetooth Help from the top menu. Select Start > Help and Support > Networking and the Web > Networking > Wireless networking

> Bluetooth devices (wireless) to view Windows Help. Exchanging Files between Bluetooth computers The procedures to exchange files and folders between Bluetooth computers are described below. 1 On the computer which is sending a file (hereafter Computer A), right-click(press and hold the Stylus Pen for more than 3 seconds) the Bluetooth icon (

Connection > File Transmission > Search for Device.

) on the taskbar and select Quick 2 In the Select Device window, click on a computer to be connected (hereafter Computer B). Using Bluetooth Devices (Optional) 58 3 If the Bluetooth Security Settings window appears, enter the Bluetooth Security Code (or Bluetooth PIN) and click on Start Pairing. The Bluetooth PIN Code is a password used for the connection between two Bluetooth devic-

es, the user just enter the same PIN Code (E.g. same numbers) on both Bluetooth devices to make a connection. 4 After a short while, the Bluetooth PIN Code required dialog box appears on Computer B, 5 If the FTP File Access Privilege Request window appears on Computer B, click on the window. enter the same code entered in Step 3 above. If the Select Access Permission window appears, click the OK button. Using Bluetooth Devices (Optional) 59 6 The file transmission window appears on computer A. Drag files or folders to send onto the window, and the files or folders are automatically transmitted. 7 If the file transmission is complete, close the File Transmission window. The received files are saved in the C:\Documents and Settings\[user name]\My Docu-

ments\Bluetooth Exchange folder. Connecting Keyboard, Mouse, Joystick and Headset devices The procedures to use Bluetooth HID devices (keyboard, mouse, joystick, etc.) or a headset, etc. on the computer are described below. The Bluetooth PIN Code is a password used for the connection between two Bluetooth devices, the user simply enters the same PIN Code on both Bluetooth devices to make a connection. 1 Turn on the Bluetooth function on the device to connect to (mouse, keyboard, joystick or head-

set). Some devices have a button to turn on the Bluetooth function, so refer to the corresponding device manual. 2 Double-click on the My Bluetooth Settings icon (

3 If the My Bluetooth Settings window appears, click on View Devices within Coverage.

) on the Desktop. If the device to connect to appears, click on the device. (E.g. mouse) Using Bluetooth Devices (Optional) 60 If the device does not appear, click the View Devices within Coverage. If the device has not appeared yet, since this menu changes to Search Devices within Coverage, click the Search Devices within Coverage to show the device. 4 If the Bluetooth PIN Code input window appears, enter a PIN code referring to the manual of the corresponding device. The PIN code for an HID device is generally printed in the manual of the corresponding device. 5 If you enter the PIN code, you can immediately use the device. A Bluetooth keyboard and mouse work only in Windows. They will not work in MS-DOS mode or in Hibernation mode. Stopping a Bluetooth device Right-click(press and hold the Stylus Pen for more than 3 seconds) the Bluetooth icon (

the taskbar and select Stop the Bluetooth Device.

) on To use a Bluetooth device after stopping it, select Start Bluetooth device as above. Usage Instructions Bluetooth devices must be within a 3m (10 ft.) distance. For a better communications environment, use the devices in an open space where no wall or obstacle exists. For a telephone connection, data synchronization, electronics business card exchange, fax transmission/reception, sound related functions, and serial port function, you can connect with only one Bluetooth device. Using the network connection or file transmission function, multiple Bluetooth devices can be connected. However, since connecting with multiple devices may slow down the data rate or make the connection unstable, connecting with one device at a time is recommended. The Bluetooth function of a Bluetooth PDA, mobile phone, mouse or keyboard may be turned off. To use them in connection with a Samsung computer supporting Bluetooth, you must check if the Bluetooth function of the device to connect to is turned on. For the procedures on turning on the Bluetooth function of a device, refer to the manual of the device. The services provided by Bluetooth devices may vary depending on their capability. For the services provided by Bluetooth devices, refer to the manual of the device. Using Bluetooth Devices (Optional) 61 Chapter 5. Using Applications Introducing Programs Using Samsung Update Plus Program Launcher Program Launcher Screen Layout Using Program Launcher Using AVStation premium Start and Screen Layout MUSIC Station PHOTO Station MOVIE Station Using AVStation NOW / AVStation Viewer Start / Exit AVStation NOW Start / Exit AVStation Viewer Screen Layout MUSIC Station PHOTO Station MOVIE Station CyberLink PowerDVD 63 65 67 67 68 69 69 70 73 76 79 79 80 81 81 83 84 86 Introducing Programs Using software supplied with the Samsung computer, you can easily use functions and troubleshoot prob-

lems. For detailed information, refer to the help of the corresponding software. Before Starting!

Not every software program may be provided or the version may differ depending on your com-

puter model. Multi Media Functions Program Launcher The Program Launcher categorizes frequently used programs, folders, web sites so that you can easily manage and access them. This program is designed for the small LCD size so that you can easily use this program with the Stylus Pen or your fingers. (

p.67) AVStation premium (

) AVStation premium is an integrated multimedia program that enables users to enjoy better mu-

sic, photographs, video, movies, etc. quality all with a single program. (

p.69) AVStation Viewer AVStation Viewer is a program that enables you to easily run AVStation premium in full screen.

(

p.79) AVStation NOW AVStation NOW is an integrated multimedia program that enables users to enjoy photographs, video, DVDs, music, etc. all with a single program and without booting Windows even when the computer is turned off. (

p.79) Introducing Programs 63 CyberLink PowerDVD (

) CyberLink PowerDVD is a DVD player program supplied with the external USB ODD. To use this program, you have to install this program manually. (

p.86) Management Functions Samsung Update Plus (

) Samsung Update Plus is software that examines and updates the Samsung software and drivers installed on your Samsung computer to the most recent versions. (

p.65) Samsung Network Manager (

) Samsung Network Manager is a program provided to support network and Internet sharing set-

up. You can configure the network settings by location and diagnose your network. (

p.51). Samsung Battery Manager (

) Samsung Battery Manager is a power management program that provides easy-to-use power management and power saving settings so that the battery usage time can be extended. (

p.99) Samsung Display Manager Samsung Display Manager is a program that displays the setting status of some buttons on the screen. Example) The icon that appears when pressing the Menu button and clicking Brightness Up. Touchkit (

) Touchkit is a program used to calibrate the Stylus Pen when the pointer position is not correct. (

p.21) Troubleshooting Functions Magic Doctor (

) Magic Doctor is troubleshooting software provided by Samsung Computer. A user can diagnose system problems via one-click or by selecting diagnostic items. (

p.103) Norton AntiVirus (

) Norton AntiVirus is a program that examines the computer for viruses and deals with any found viruses. Since viruses may damage the files and data on your computer, it is recommended to examine your system frequently with the Norton AntiVirus program. (

p.104) Introducing Programs 64 Using Samsung Update Plus Samsung Update Plus is software that examines and updates Samsung software and drivers installed on your Samsung computer to the latest version. To use Samsung Update Plus, your computer has to be con-

nected to the Internet. To Update Samsung Software and Drivers 1 Select Start > All Programs > Samsung > Samsung Update Plus > Samsung Update Plus. If this is the first time you are running the program, a window will appear asking you if you agree to the agreement in the window. Click Agree to use this software. 2 Click Search for and Install Updates and click the Search for New Updates button. 3 If there are available software or driver updates for your computer, the available updates will be listed. Select the required updates from the list and click Install Update to start the update.

(The update list on the screen may differ depending on the computer model.) Updates that must be installed separately. If you select Install as an update item that must be installed separately, a message appears informing you of this. Follow the instruction message to correctly install it. Using Samsung Update Plus 65 Automatic update items display By default, your computer is configured to automatically search for updates. If there is a new update available, this is displayed in the notification area. Click the balloon help icon in the no-

tification area, to locate the latest available updates. To change the automatic update settings, click the Configuration button in Figure 2 and change the settings. Samsung Update Plus does not provide updates for additionally installed software and device drivers. Using Samsung Update Plus 66 Program Launcher The Program Launcher categorizes frequently used programs, folders, and websites so that you can easily manage and access them. This program is designed for the small LCD size so that you can easily use this program with the Stylus Pen or your fingers. Program Launcher Screen Layout To launch the Program Launcher, click Start > All Programs > Microsoft Touch Pack for Tab-

let PC > Program Launcher. The Program Launcher is launched. Battery Charge Status When clicking the icon, the Power Option Properties window appears. Wireless LAN Status When clicking the icon, the Network Connections window appears. View Taskbar Clock Minimize Close Category Short-

cut Icon Program Launcher 67 Using Program Launcher As an example, the procedures to launch the Calculator on the Program Launcher are described below. 1 Run the Program Launcher. 2 Select More Programs > Calculator. The Calculator program is launched. For more detailed usage For more detailed usage, click Program Launcher Help from the Tools category. Program Launcher User Setting functions You can add a category and add or delete a shortcut icon. Click on Customize Launcher from the Tools category to change the settings. Program Launcher 68 Using AVStation premium AVStation premium is an integrated multimedia program that enables users to enjoy music, photo-

graphs, video, movies, etc. all with a single program. gram version. Before Starting!

AVStation premium is optional and is not always provided depending on the model. The screenshots used in this manual may differ from the actual screens according to the pro-

TV Station is only available for systems supporting the TV function. To play an audio CD or DVD, you have to connect the external USB ODD to the computer. For detailed usage, refer to the program help. The following descriptions presuppose that the external ODD is connected. Start and Screen Layout To launch the program, select Start > All Programs > Samsung > AVStation premium >

AVStation premium. Alternatively double-click the AVStation premium icon (

) on the Desktop. x c v z z Station Bar x Menu Bar c Library v Exit Press the Exit button to exit the program. MUSIC You can play a music file or an audio CD. PHOTO You can view or edit a photograph (image), and also view the photographs through in a SlideShow. MOVIE You can play a video (movie) file or a DVD/VCD title. Using AVStation premium 69 MUSIC Station Launch AVStation premium and click MUSIC on the Station Bar. z c x b v m

, n

. z MUSIC Menu Bar x Station Bar c MUSIC Library v Register a File b Playlist n Playlist Control Buttons m Play Control Buttons

, Volume Control

. Play Options Playing an Audio CD The procedures to play an audio CD are described below. 1 Launch AVStation premium and insert an audio CD into the CD drive. 2 In the Audio CD window, select Play Audio CD using Samsung AVStation and click the OK button. Using AVStation premium 70

3 The tracks on the audio CD are displayed in the Playlist and the first track is automatically played. If an audio CD is already in the CD drive, double-click the album title in the Audio CD folder of the Library and add the tracks to the Playlist. The tracks added to the Playlist are played. Playing a Music File If a music file is registered to the MUSIC Library, you can easily play the music file. For the procedures to register tracks to the Library, refer to (

p.72). 1 Move to MUSIC Station and double-click on All Music. 2 Double-click a music file. The file is added to the playlist and played. Using AVStation premium 71 Playing a Track not registered to the Library Click File > Open, select a music file to be played and click Open. The selected track is regis-

tered to the Library and played. Creating My Playlist My Playlist is a personal album used to collect, manage and play your favorite music files. For the procedures to create My Playlist, refer to the descriptions of MUSIC Station in Help. Adding Music Files to the Library MUSIC Library is a library of music files used by MUSIC Station. The procedures to add music files saved on the computer to the Library are described below. You can add files, folders or search and add files. As an example, the procedures to add a folder are described below. 1 Click on the Register a File (

) button below the Library and click on Add by Folders. 2 Select a folder which includes music files and click the OK button. The music files in the folder are added to the Library. The tracks used in AVStation are automatically added to the Library. Using AVStation premium 72 PHOTO Station Launch AVStation premium and click PHOTO on the Station Bar. b n m z c v x

, z PHOTO Menu Bar x Station Bar c PHOTO Library v Register a File b Image Viewer Tab n Image Editor Tab m Move to a Higher-Level Folder

, Preview/Zoom-in Viewing an Image The procedures to view images registered to the PHOTO Library indivedually or via a SlideShow are described below. For the procedures to register image files to the Library, refer to (

p.75). 1 Move to PHOTO Station and double-click on All Images. 2 Click on a folder which includes images, and the images in the folder are displayed in the Image Viewer window. Image Viewer Window Image Using AVStation premium 73 3 Double-click on an image. The selected image is zoomed in on. Viewing an Image not registered to the Library Click File > Open, select an image file to view and click Open. The selected image file is registered to the Library and displayed in the Image Viewer window. Viewing an Image in Full Screen or through a SlideShow. Click the Full Screen (

window.

) button or SlideShow (

) button below the Image Viewer To return to the Image Viewer window, double-click on the screen. Watching a SlideShow while Listening to Music To view a SlideShow while listening to music, play music from MUSIC Station and run SlideShow. Setting an Image as the Background. Click the Set as Background (

image is set as the Desktop background.

) button below the Image Viewer window. The selected Editing an Image You can change the shape of an image, edit an image or apply special effects to an image. The im-

age editor functions are described below. 1 Select an image to edit in the Image Viewer window, and select the Image Editor tab. The Image Editor screen appears. Using AVStation premium 74 The Image Editor screen consists of an Image Workspace window and 3 Tool tabs. Image Workspace Zoom In / Zoom Out 2 Edit the image using the Shape, Edit and Effect tools. Tool Tabs Shape tool: Change the shape of an image through cut, resize. Edit tool: Draw a line, add some clip art or enter letters. Effect tool: Apply various effects to an image. 3 When finishing editing an image, click the Save Edited Image (

age Editor window. The edited image is saved.

) button below the Im-

Adding Images to the Library The PHOTO Library is a library storing image files to be used by PHOTO Station. The procedures to add image files saved on the computer to the Library are described below. You can add files, add folders or search and add files. As an example, the procedures to add folders are described below. 1 Click the Register a File (

) button below the Library and click on Add by Folders. 2 Select a folder with image files and click the OK button. The image files in the folder are added to the Library. The image files used in AVStation are automatically added to the Library. Using AVStation premium 75 MOVIE Station Launch AVStation premium and click on MOVIE on the Station Bar. z c x b z MOVIE Menu Bar x Station Bar c MOVIE Library v Register a File b Video Play window n Play Control Buttons m Volume Control

, Capture Button v n m

, Playing a DVD The procedures to play a DVD title are described below. To play a DVD title, DVD playing software (e.g. CyberLink PowerDVD) must be installed. Install the DVD playing software first. 1 Launch AVStation premium and insert a DVD title into the DVD drive. 2 In the 'What do you want Windows to do?' window, select Play DVD Video using Sam-

sung AVStation and click the OK button. Using AVStation premium 76 3 The DVD title is played. If a DVD title is already in the DVD drive, double-click the DVD title in the DVD / VCD folder of the Library. The DVD title is played. Playing a Movie(Video) File The procedures to play a video file registered to the MOVIE Library are described below. For the procedures to register files to the Library, refer to p.78. 1 Move to MOVIE Station and double-click All Movies. 2 Double-click a video file. The file is played. Playing a Video File not Registered to the Library Click File > Open, select a video file to be played and click Open. The selected file is registered to the Library and played. Using AVStation premium 77 Playing a Video File in Full Screen 1) Double-click on the current playback screen. 2) The video is played in full screen. In full screen, move the mouse pointer to the bottom of the screen to show the Play Control bar. To play at the default screen size, double-click on the screen. Capturing the Video Screen

) below the Play window when the desired image ap-

Click on Capture Current Screen (

pears on the screen and click the OK button. Captured images are saved in the C:\Program Files\Samsung\AVStation premium x.x\Data\Captured Images folder. In addition, you can view captured images in the PHOTO Station > Captured Images folder. Adding Videos to the Library The MOVIE Library is a library storing video files to be used by MOVIE Station. The procedures to add video files saved on the computer to the Library are described below. You can add files, add folders or search and add files. As an example, the procedures to add folders are described below. 1 Click the Register a File (

) button below the Library and click Add by Folders. 2 Select a folder which includes video files and click the OK button. The video files in the folder are added to the Library. The video files used in AVStation are automatically added to the Library. Using AVStation premium 78 Using AVStation NOW / AVStation Viewer Using these programs, you can play music, photographs, video and movies in full screen. You can enjoy multimedia files using AVStation NOW when the computer is off and using AVStation Viewer when the com-

puter is on. Before Starting!

AVStation NOW and AVStation Viewer are optional and may not be provided depending on the model. AVStation NOW Restrictions You can only use AVStation NOW when the computer is turned off. Using AVStation NOW, you can play files registered to the AVStation premium Library, saved to My Computer, and saved on the multi-card slot. (For the procedures to register files to the Library, refer to If a login password for a Windows user account has been defined or if the folder is protected, you cannot play the files in the folder in AVStation NOW. p.75 and p.78.) p.72, In AVStation NOW, the Auto Scaler function is not available. AVStation Viewer Restrictions Using AVStation Viewer, you can only play files registered to the AVStation premium Library.

(For the procedures to register files to the Library, refer to p.75 and p.78.) p.72, Since the screen layout and usage of the two programs are similar, the manual describes the functions and screens on the basis of AVStation NOW. The screenshots figures may differ from actual ones depending on the program version. TV Station is only available for systems supporting the TV function. Start / Exit AVStation NOW Starting To turn the computer on, slide the Power switch/AVS NOW switch to the left (

for more than 0.1 seconds.

) and hold it If the HOLD switch on the left side of the computer is slid upwards all buttons of the computer are locked and do not function. If AVStation NOW is not launched, check the position of the HOLD switch. Using AVStation NOW / AVStation Viewer 79 Exiting Move the mouse pointer to the top screen and click the Exit (

) button. Alternatively, slide and hold the Power switch/AVS NOW switch to the right for more than 0.1 seconds. Start / Exit AVStation Viewer Starting Select Start > All Programs > Samsung > AVStation premium > AVStation Viewer from Windows. Exiting Move the mouse pointer to the top of the screen and click the Exit (

) button. Using AVStation NOW / AVStation Viewer 80 Screen Layout MUSIC You can play a music file or audio CD. PHOTO You can view a photograph or image file one by one or in a SlideShow. MOVIE You can play a video, DVD or VCD title. Settings You can configure the Music, Photo and Movie settings. Move to the start screen while using the program Click over the top left in the current screen. Then the you can move to the start screen. icon appears. When dicking this icon, MUSIC Station The procedures to play a music file or an audio CD are described below. Playing a Music File The procedures to play a music file registered to the MUSIC Library are described below. (For the procedures to register files, refer to p.72.) 1 Launch AVStation NOW and click on Music. Using AVStation NOW / AVStation Viewer 81 2 Click on All Music and double-click a file in the right pane. The music file is played. z x v c z My Computer This only appears in AVS-

tation NOW. You can manually find and play files on My Computer or a removable disk. x All Music c Playlist Window v Music File Playing an Audio CD 1 Launch AVStation NOW and insert an audio CD into the CD drive. 2 In the AVStation NOW start screen, click on Music. 3 Double-click the Audio CD in the left pane and double-click on an album or music file in the right pane. The selected music file is played. Using AVStation NOW / AVStation Viewer 82 PHOTO Station The procedures to view images registered to the PHOTO Library one by one and through a Slide-

Show are described below.

(For the procedures to register image files to the Library, refer to p.75.) 1 Launch AVStation NOW and click on Photo. 2 Click on All Images and double-click on an image file in the right pane. z x c z My Computer This only appears in AVS-

tation NOW. You can manually find and play files on My Computer or a removable disk. x All Images c Image File 3 The selected image is zoomed in on. To view an image in Full Sreen or via a SlideShow. Click on the SlideShow or Full Screen button below the zoomed in image. To return to the previous status in the SlideShow or Full Screen, double-click on the screen. In AVStation NOW, double-click and click on Back. Using AVStation NOW / AVStation Viewer 83 MOVIE Station The procedures to play a video (movie) file or DVD/VCD title are described below. Playing a Movie File The procedures to play a video file registered to the MOVIE Library are described below. (Refer to p.78.) 1 Launch AVStation NOW and click the Movie. 2 Click on All Movies and double-click a movie file in the right pane. The movie file is played. z x c z My Computer This only appears in AVS-

tation NOW. You can manually find and play files on My Computer or a removable disk. x All movies c movie File Displaying the Play Control window When clicking on the screen once, the Play Control window appears at the bottom. Using AVStation NOW / AVStation Viewer 84 Playing a DVD 1 Launch AVStation NOW and insert a DVD title into the DVD drive. 2 In the AVStation NOW start screen, click on Movie. 3 Click on DVD/VCD and double-click on the DVD title. The DVD title is played. Using AVStation NOW / AVStation Viewer 85 CyberLink PowerDVD CyberLink PowerDVD is a DVD player program. Before Starting!

CyberLink PowerDVD is supplied with the external USB ODD. So, it is optional and is not supplied with some models. In addition, to use this program, you have to install the program manually using the external USB ODD. 1 Insert a DVD title into the DVD drive. 2 Select Play DVD Video Using PowerDVD and click OK. z x After a moment, the DVD title is played. 3 If the DVD title is not played automatically, click Start > All Programs > CyberLink Pow-

4 Click the Play button in the CyberLink PowerDVD play control panel. erDVD > CyberLink PowerDVD. z x z PLAY x SETTINGS CyberLink PowerDVD 86 For more detailed usage For more detailed usage, click Start > All Programs > CyberLink PowerDVD > PowerDVD Help. DVD Region Code A DVD title has a region code according to the international specifications so that it can be played only in that specific region. DVD titles with a region code will only play on DVD drives with the same region code. A DVD drive is sold with an empty region code and the region code is set when the user inserts a DVD title into the drive for the first time. Whenever a DVD title is inserted with a region code that is different from that of the DVD drive, the region code of the DVD drive is automatically changed to the region code of the DVD title. However, changing the region code of a DVD drive is limited to 5 changes. After that, the region code is permanently fixed to the last region code. CyberLink PowerDVD 87 Chapter 6. Settings Using System Setup Starting System Setup The System Setup Screen Setting a Booting Password Changing the Booting Priority Using the Battery Removing and Attaching a Battery Charging the Battery Monitoring the Battery Charge Extending the Battery Usage Time 89 89 90 92 95 96 96 97 97 99 Using System Setup The System Setup (BIOS) program enables the configuration of the computer hardware. Before Starting!

Use the BIOS setup to define a booting password, change the booting priority or add a new device. Since incorrect settings may cause your system to malfunction or crash, take care when con-

figuring up the BIOS. The functions of the BIOS setup are subject to change for product function enhancement Press the + or - Volume Control buttons at the top of the computer while holding down the purposes. Menu button to adjust the LCD brightness. Starting System Setup 1 Slide the Power switch to the right to turn the computer on. 2 The booting screen (SAMSUNG logo) appears. Press the Menu button (

of the computer. When an external keyboard is connected, press the F2 key.

) on the right side Using System Setup 89 3 After a moment, the BIOS setup screen appears. The items of the BIOS setup may differ de-

pending on the product. z x c z Setup Menu x Setup Items c Help Descriptions of the selected item are displayed. The System Setup Screen Menu Main Advanced Security Boot Exit Function Changes the basic system. Configures the advanced functions on your computer. Enables the security functions, including passwords. Specifies the order of the boot devices and configures them. Exits System Setup Using System Setup 90 System Setup Buttons(Keys) The following buttons (keys) are used in System Setup. When an external keyboard is connected, you can use the keys enclosed by parenthesis. For ex-

ample, you can press the F1 key instead of the Auto Scaler button. Setup Key Button Function Auto Scaler Button (F1) When pressing the Auto Scaler button, Help appears. When pressing the button again, Help disappears. Up & Down Keys ( , ) Move the Joystick up or down to move the cursor up and down. Left & Right Keys ( , ) Move the Joystick left or right to move the cursor left or right. u3(F5) / u1(F6) Press the u3 (F5) / u1 (F6) u3 and u1 buttons to change the value of an item. u4(Esc) Enter

(F9)

(F10) Press the u4 button to return to a higher-level menu or to move to the Exit menu. Selects an item or opens a submenu. To initialize the setup settings, press the F9 key on the external keyboard. If an external keyboard is not connected, select Exit >

Load Setup Default from the setup menu. To save the changes press the F10 key on the external keyboard. If an external keyboard is not connected, select Exit >

Exit Saving Changes from the setup menu. Exiting the System Setup z Move to Exit menu > Exit Saving Changes using the Joystick and press Enter. x Select Yes and press the Enter button. The System Setup is closed and Windows is started. Using System Setup 91 Setting a Booting Password When setting a password, you have to enter a password to start up the computer or enter the System Setup. By configuring a supervisor password, you can restrict system access to authorized users only and protect data and files saved on the computer. Before Starting!

Do not lose or forget your password. If you have forgotten your password, contact a Samsung service center. In this case, a service fee will be charged. For the setup buttons, refer to the description of 'System Setup Buttons(Keys)'. p.91 Setting a Supervisor Password A Supervisor Password is required to turn the computer on or to start System Setup. When a supervisor Password is set, users other than a supervisor cannot use the computer. 1 Select the Security menu in the System Setup. 2 In the Set Supervisor Password item, press <Enter>. Setting a Booting Password 92 3 On the screen, the password setting buttons are described. You can set a password by entering numbers between 1 and 4 with the Joystick. Since the u2 button is used as the Delete (BackSpace) function and the u4 button is used as the Cancel (Esc) function, enter the password using the Joystick. Up: 1 Left: 4 Right: 2 Next: 3 Enter a password, press <Enter>, re-enter the password for confirmation, and press <Enter>

again. 4 When a message confirming the password configuration appears in the [Setup Notice] win-

dow, press <Enter>. The supervisor password has been set. The supervisor password is required to turn the com-

puter on or to enter System Setup. Setting a User Password Users can start the system with their user password, but cannot enter the System Setup. Before configuring a user password, a supervisor password must have been configured. Deactivating the supervisor password also deactivates the user password. However, please note that deactivating a user password does not deactivate the supervisor pass-

word. In the Set User Password item, press <Enter> and complete the procedures of Step 3 for Setting a Supervisor Password. Activating the Booting Password Before activating the booting password, a supervisor password must be configured. Set the Password on boot option to Enabled. From now on, system booting will not proceed with-

out the password. Setting a Booting Password 93 Deactivating the Password password in the Set Supervisor Password item, press<Enter>. 1 On the password to be deactivated, press <Enter>. For example, to deactivate a supervisor 2 In the Enter Current Password item, enter the currently configured password and press 3 Leave the Enter New Password item field empty, and press <Enter>. 4 Leave the Confirm New Password field empty, and press <Enter>. 5 In the [Setup Notice] window, press <Enter>.

<Enter>. The password is deactivated. Setting a Booting Password 94 Changing the Booting Priority The default booting priority of your computer is the CD-ROM, a removable device and the hard disk drive in this order. You can change the booting priority using the Boot menu of the System Setup. 1 Select the Boot menu in System Setup. 2 Press <Enter> on the Boot Device Priority item. 3 Use the u1 or u3 button to move a booting device up. 4 Exit from the Boot menu by pressing the u4 button and move to the Exit > Exit Saving Changes menu using the Joystick and press <Enter> to save the settings and exit the setup. Changing the Booting Priority 95 Using the Battery Please refer to the following instructions when running the computer on battery power, without connecting the AC power. A Lithium-Ion smart battery is supplied with this computer. Before Starting!

Carefully read and follow the precautions printed on the battery before using the battery. 60C, as this may cause fire. Precautions Use only charges specified in the user's guide. Never heat the battery pack, put it near or in a fire or use at a temperature higher than Never cause a short circuit between the battery pack terminals or disassemble the battery Carefully read and follow the precautions printed on the battery and the safety instructions in Please refer to the system operation environment of this manual and operate and the store the user's guide before using the battery. pack. the battery at room temperature. (

p.125) Removing and Attaching a Battery 1 Shutdown the system and place the computer upside down on a flat surface. 2 Pull the two battery latches outwards (

), then remove the battery. Battery latch 3 To install the battery again, slide the battery into the system. The battery latches move inwards and fix the battery automatically. Check if the battery latch has been moved inwards. Using the Battery 96 Charging the Battery 1 Attach the battery and connect the AC adapter to the DC-in jack of the computer. 2 When charging is complete, the Charge LED turns green. The battery will then be charged. Status Charging Charging complete AC adapter not connected Charge LED Amber Green Off Monitoring the Battery Charge You can view the battery charge status by completing the following procedures. Viewing the battery Charge from the Menu button Press the Menu button and select Battery. Viewing the Battery Charge the Control Panel Select the Start > Control Panel > Performance and Maintenance > Power Options >

Power Meter tab. z Power Supply Status x Remaining Battery Charge z x Using the Battery 97 Viewing the Battery Charge on the battery Separate the battery and press the PUSH button on the battery. The remaining battery charge (%) will be displayed. Battery Warning An alarm will sound when the remaining battery charge reaches below 10%. In this case, connect the AC adapter or turn off the computer and install a fully charged bat-

tery. When the remaining battery charge is under 3%, the computer automatically saves the cur-

rent work and turns off. These settings may differ according to the settings in the Control Panel > Performance and Maintenance > Power Options > Alarms tab. Using the Battery A battery is an expendable supply, so when using it for a long time, the capacity/battery life is short-

ened. If the battery life is reduced to under half its initial time, we recommend purchasing a new battery. For long periods of not using the battery, store the battery after discharging it. This extends the battery life time. Using the Battery 98 Extending the Battery Usage Time Using Samsung Battery Manager The Battery Manager is a power management program that enables using battery power efficiently. You can select an optimized power mode according to your requirements. Click Start > All Programs > Samsung > Samsung Battery Manager > Samsung Battery Manager. Change Power Mode Power Saving Effects You can only change the detailed configuration in Custom Mode. Maximum Battery Saving Mode This mode is appropriate for conditions which require the maximum battery usage time. This may degrade the performance of the system. Normal Mode This mode is appropriate for normal conditions. Both system performance and battery usage time are optimized. Maximum Performance Mode This mode is appropriate for conditions that require maximum system performance. Therefore, the battery usage time may be reduced in this mode. Custom Mode In this mode, a user can configure a detailed configuration to save the battery usage time. You can adjust the LCD brightness, the system standby time, the screen color quality, and the graphics mode values. Using the Battery 99 Power Saving Effect This shows the relative battery usage time for each power mode. The more effective the power saving, the longer the graph will appear. When Running a Game or Multimedia Application A game or multimedia application may not work smoothly in Maximum Battery Saving Mode. Us-

ing this is recommended when the AC adapter is connected or in Normal or higher modes. Samsung Battery Manager Power Modes Since the Maximum Battery Saving Mode of the Samsung Battery Manager controls the sys-

tem operating speed to extend the battery usage time, the performance of the system may be degraded. When changing the power settings in Custom Mode in the Samsung Battery Manager, the To use Normal Mode in Samsung Battery Manager after reinstalling Windows XP, you have to settings of the Power Options Properties window are changed accordingly. install the Samsung Battery Manager using the system software media. Turning Off Unnecessary Devices Turning off unnecessary devices extends the battery usage time. 1 Select the Start > Control Panel > Performance and Maintenance > System > Hard-

2 Right-click(press and hold the Stylus Pen for more than 3 seconds) a device you are not using, ware tab and click on Device Manager. and select Disable. Example) Wireless LAN, Bluetooth, etc. Using the Battery 100 Battery Calibration When charging/discharging the battery repeatedly for only a short time, the battery usage time may be reduced by the difference between the actual battery charge and the remaining charge display. In this case, the actual battery charge and the remaining charge display will be the same by dis-

charging the battery completely using the Battery Calibration function, and then recharging it again. 1 Disconnect the AC power adapter after turning off the system. 2 Restart your computer and press the Menu button when the SAMSUNG logo appears, to start 3 Using the arrow keys, select Smart Battery Calibration in the Boot menu and press Enter. System Setup. 4 Highlight Yes in the [Battery Calibration Confirmation] window and press Enter. The Battery Calibration function is activated and the battery is discharged by force. To stop the operation press the u4 (Esc) button. This operation requires 3~5 hours depending on the battery capacity and the remaining battery charge. Using the Battery 101 Chapter 7. Troubleshooting / Appendix Using Magic Doctor Using Norton AntiVirus Restoring the System Creating a Restore Point Returning your computer to an earlier restore point Undoing the last restoration Reinstalling Software Running the system software Media Installing drivers and programs Reinstalling Windows XP Running the System Recovery Media Quick Installation Standard Installation Installing Windows When Windows Fails Questions and Answers Windows Related Display Related Sound Related Wireless LAN Related Games and Programs Related Bluetooth Security Center Other Specifications Glossary Index Important Safety Information Regulatory Compliance Statements WEEE Symbol Information Contact SAMSUNG WORLD WIDE 103 104 105 105 106 107 108 108 109 110 110 111 112 113 114 114 114 116 117 120 121 122 124 125 127 130 131 132 138 139 Using Magic Doctor Magic Doctor is troubleshooting software provided by Samsung Computer. A user can diagnose system problems via one-click or by selecting diagnostic items. 1 Click Start > All Programs > Samsung > Magic Doctor > Magic Doctor. 2 Click on an icon at the top of the screen. OneClick Diagnosis: You can diagnose problems affecting the system connections and system operations via one-click. User Diagnosis: You can select the necessary diagnostic items and diagnose system problems. System Recovery: Launches the Restoring the System function of Windows XP. p.105 3 When the system diagnosis is completed, the diagnostic result appears. If problems are found, click the Cure button to correct the problem. Magic Doctor starts the correction operations. Using Magic Doctor 103 Using Norton AntiVirus The Norton AntiVirus software is provided as the virus inspection program. Before Starting!

When first running Norton AntiVirus, the Norton AntiVirus Configuration window pops up. If you complete the configuration and your computer is connected to a network, you can download and install the latest updates via the network. When the live update is completed, virus scanning starts automatically. To stop scanning, click on Stop. If you didnt configure the Norton AntiVirus program, a security alert icon (

) appears in the notification area on the right of the task bar. This indicates that the current security state of your computer is not secure. Configure the virus-scanning program to make the security alert icon disappear. To run Norton Antivurs, follow the steps below:

1 Select Start > All Programs > Norton AntiVirus > Norton AntiVirus 200x. 2 Click Scan Virus, select the drive to inspect, and click Scan. Vaccines for the latest viruses can be downloaded by con-

necting to Symantecs homepage. 3 If a virus is detected, select Automatic in Norton AntiVirus, and click Next to delete the virus. Using Norton AntiVirus 104 Restoring the System This description is only for models running Window XP. The System Restore function allows you to restore your computer to an earlier copy (called a restore point), and restores the settings if a problem occurs.The System Restore function is provided by Windows XP to enable the resolution of various problems without reinstalling Windows XP complete-

ly. You can use System Restore in the following cases. The system files are deleted or damaged by mistake. The system is unstable or a problem occurs in a device driver. A problem occurs after changing system files such as the registry. A problem occurs after installing a new program. Creating a Restore Point Restore points are created at predetermined times and at times of significant system events such as when a program or a driver is installed. You can also decide when to create your own restore points. There must be more than 200MB of free space on the hard disk drive. If the disk space is insuf-

ficient, a saved restore point might be deleted. It is recommended to creating a restore point when purchasing a new computer and before in-

stalling new programs or device drivers. Before creating a restore point, check that the computer is operating properly. The procedures to create your own restore point are described below. 1 Click Start > All Programs > Accessories > System Tools > System Restore. Restoring the System 105 2 Select "Create a restore point", and click Next. Since changes made after the Recovery Point may not be maintained, please back-up all neces-

sary files to another location before performing system recovery. 3 In the Restore point description box, type a name to identify the restore point, and than click Create. A restore point has been created. Returning your computer to an earlier restore point The procedures to return your computer to an earlier restore point when a problem has occurred are described below. 1 Click Start > All Programs > Accessories > System Tools > System Restore. 2 Select "Restore my computer to an earlier time", and then click Next. Restoring the System 106 3 Select a restore date from the calendar restoration and select a restore point from the list, and then click Next. The date of the restore point is displayed in bold font. 4 Confirm the selected restore point and click Next. System Restore shuts down Windows, and 5 After the restoration is complete, Windows restarts. In the [System Restore completed] dialog, starts the restoration processes. click OK.Your computer has been restored to the selected restore point. Undoing the last restoration The procedures to undo a restoration are described below. 1 Click Start > All Programs > Accessories > System Tools > System Restore. 2 Select "Undo my last restoration", and then click Next. 3 Confirm the restoration information to undo, and than click Next. System Restore shuts down 4 After the undo restoration is complete, Windows restarts. In the [Undo the last restoration com-

Windows and starts undoing the restoration. pleted] dialog, click OK.Your computer has been restored to the point prior to the last restora-

tion. Restoring the System 107 Reinstalling Software If you have reinstalled the Windows operating system, or the system and program do not operate properly, you can re-install the driver and program using the system software Media. Before Starting!

If a program has a problem, it is recommended removeing the program using Add or Remove Programs in the Control Panel and reinstalling it using the system software media. To use the system software media, the external USB ODD must be connected to the com-

puter. The following descriptions presuppose that the external USB ODD is connected. This computer is optimized for Microsoft Windows XP, therefore drivers for other operating sys-

tems are not included on the System Software Media. Running the system software Media Insert the system software Media into the external USB ODD. The initial screen appears automati-

cally. Standard Installation: This displays a list of drivers or programs that are not currently installed on your computer from the system software Media provided. All necessary components are installed using the factory defaults. Minimum Installation: This displays the components (driver, Windows programs, etc) that, if not installed, may cause problems with the system performance. You can install only required components. Custom Installation: You can customize the installation of drivers and programs. Reinstalling Software 108 Installing drivers and programs 1 Click Standard Installation in the main window of the System Software Media. (Standard In-

2 The system is scanned to display the drivers and programs that need to be installed. 3 Click OK. The drivers and programs are automatically installed as factory defaults. stallation is recommended) 4 When done, restart the system. Reinstalling Software 109 Reinstalling Windows XP If Windows XP is not operating properly due to a system error, or if the hard disk drive has been replaced, you can reinstall Windows XP using the system recovery media. ter. The following descriptions presuppose that the external ODD is connected. Before Starting!

To use the system recovery media, the external USB ODD must be connected to the compu-

There are two Windows installation modes: Standard Installation, which allows users to If you cannot run Windows, refer to When Windows does not run or when trying to install Windows using the Standard Installa-

change options, and Quick Installation, which allows users to install Windows easily. p.113 to install Windows. tion of the system recovery media, a USB external keyboard is necessary. Before turning the computer on, connect the USB keyboard. Then, install Win-

dows. When connecting the USB keyboard during the installation, the system will not recognize the USB keyboard. Reinstalling Windows may delete the data on the hard disk drive such as files, programs, etc. In order to minimize damage from data loss, please remember to always back up your data. Sam-

sung Electronics is not liable for any data loss. Running the System Recovery Media Insert the system recovery media into the external USB ODD. The start screen will appear auto-

matically. Standard Installation You can change the settings for Regional and Language Options, Date and Time, Computer Name, User Accounts, etc. during the Windows installation. However, after reinstalling Windows, you have to manually reinstall device drivers and programs using the system software media. Reinstalling Windows XP 110 Quick Installation This reinstalls Windows with the user data and the system settings intact by over-

writing the Windows folder. Since the user data and the system settings in the already existing Windows folders are pre-

served, you do not have to reinstall device drivers and programs. Quick Installation The Windows Quick Installation procedures are described below. You can install using the Stylus Pen. 1 In the system recovery media start screen, click Quick Installation. 2 The description for the Quick Installation appears. Click Yes to start Windows installation. When the installation is complete, the Windows Desktop appears. Remove the system recov-

ery media from the ODD. Reinstalling Windows XP 111 Standard Installation The Windows Standard Installation procedures are described below. For the Standard Installation, a USB keyboard is necessary. You have to connect the USB key-

board before turning the computer on. The descriptions assume that you are using an external USB ODD and USB keyboard. 1 In the system recovery media start screen, click Standard Installation. 2 The description for the Standard Installation appears. Click Yes to start the Windows installation. The system restarts and the Windows installation begins. If you have set a booting password, enter the booting password when booting the system to continue the installation. 3 After the system has restarted, the message 'Press any key to boot from DVD' appears. Do not press any key at this time. After a moment the partition configuration screen appears. To leave the partition unchanged, move to the C:Partition 2 using the direction key ( ) and press <Enter>. Partition setting is a function that divides the hard disk drive into one or several partitions. Note that changing the partition deletes all data on the hard disk drive. 4 Select the folder to install the Windows operating system. To delete the previous version of Windows and install in the current folder, press <L> on the keyboard. Reinstalling Windows XP 112 When pressing the ESC key to select another folder for the installation, a new Windows folder is created causing the risk of dual booting. 5 After the installation process copies the necessary folders for the Windows installation, restart the system, and the message "Press any key to boot from DVD" is displayed. You do not need to enter anything. The Windows XP installation screen will appear shortly to proceed with the installation. 6 When the Regional and Language Options window appears, click Next. 7 When a window that requires your name and organization pops up, enter your name and the organization and click Next. A window that requires the computer name and the administrator password appears. Enter the computer name and the administrator password and click Next. 8 When the Date and Time Settings window appears, click Next. Setup continues and the sys-

9 When the system restarts, the message "Press any key to boot from DVD" is displayed. You tem restarts. do not need to enter anything. In a moment, the Windows XP Desktop appears. When you see the Windows desktop, this means that the installation process is completed. 10 Remove the system recovery media and install the device drivers and applications from the system software media. (

p.108) Installing Windows When Windows Fails If you cannot run Windows, you have to boot the system with the system recovery media and rein-

stall Windows. An external USB ODD and USB keyboard must be connected before starting the installation. You have to connect the USB keyboard before turning the computer on. If you connect the USB keyboard during the installation, the system will not recognize the USB keyboard. do not need to press anything. 1 Insert the system recovery media into the external USB ODD and turn the computer on. 2 When the system restarts, the message "Press any key to boot from DVD" is displayed. You 3 The partition configuration screen will appear. To install Windows in the selected partition with-

4 Select a file system (format). To keep the current file system, press <Enter>. 5 Select the folder to install the Windows operating system. 6 The subsequent procedures are the same as those after Step 5 of <Standard Installation>. (

To delete the previous version of Windows and install in the current folder, press <L> on the keyboard. out change, press <Enter>. p.113) Reinstalling Windows XP 113 Questions and Answers This section provides information on possible problems, solutions and other references for system use. Windows Related Q1 The system does not shutdown properly. A When the system does not shutdown normally, press and hold the Power button until the sys-

tem shuts down manually. If the Power-Saving Mode is configured into the Power button, press and hold for more than 4 seconds to shut the system off. When the system is turned on after such a manual shutdown, Scandisk will run to check errors in the system. Q2 The system freezes during a program operation A1 There is an error with the program currently being used. Press the <Ctrl>, <Alt>, and <Del>

keys (Windows Security Button) simultaneously and select End Task in the [Windows Task Manager] window. A2 There is an error with the Windows OS. Reboot the system by using the Power button. Display Related Q1 The LCD screen is too dark or too bright A Adjust the LCD brightness. Press the Menu button and select either Brightness UP or Brightness Down. Alternatively, press the + or - Volume Control buttons at the top of the computer while hold-

ing down the Menu button to adjust the LCD brightness. Q2 The screen saver is activated while Media Player is playing a movie or video clip. A Unselect Tools > Options > Player > Allow screen saver during playback in the Media Player. Q3 In the following cases, the screen blinks or displays noise for a short time. A Clicking on the Graphics Related tab, Changing the Resolution, Changing the Display Device, Removing the AC Adapter, Restarting the System, Changing the Power Mizer level. This may happen while the video driver is examining the connected device. While busy detect-

ing, any connected display devices may blink or some noise may occur. In addition, when pressing the Auto Scaler button, the screen may blink or display noise for a short time, while the resolution changes or the Down Scale (resolution zoom out) function op-

erates. Questions and Answers 114 A A Q4 When I connect a projector, and change the settings to display the screen image on both the LCD and the projector by pressing the Menu button, the screen is not displayed properly. Press the Menu button and press the LCD/CRT twice to select LCD+CRT. If the screen image or some part of it is not displayed on the screen, this is because the LCD resolution is low or the current resolution is too wide and cannot be supported by the projector. Press the Auto Scaler button and change the resolution to 800x600 pixels. A Q5 I have run a function from the menu program, but the corresponding shortcut icon does not appear on the screen. The shortcut icons only appear when both the Magic Keyboard and Samsung Display Manager programs are installed. Q6 When I connect an external monitor and select the monitor, no screen image is dis-

played (Clone Mode). This may happen when the current resolution is inappropriate or Dual View (Extended Mode) is selected. Try the following methods. z When the current resolution is inappropriate This computer supports the 800x480 WVGA resolution. Since this resolution is lower than that of the operating system, the above symptom may appear when the external monitor cannot support this resolution. Change the resolution to 800x600 pixels, press the Menu button and press the LCD/CRT twice to select LCD+CRT. x When Dual View (Extended mode) is selected When Dual View is selected, Clone Mode is not supported. In this case, unselect Dual View, and press the Menu button to select the Clone Mode. For the procedures to deactivate Dual View, refer to (p.33). Q7 In the Display Properties window, the resolution starts from 800x600. A Even if the current resolution is 800x480 pixels, it may be represented as 800x600 in the Dis-

play Properties. This is because the lowest resolution of the operating system is 800x600 and is unable to show the 800x480 resolution in the Display Properties window. Q8 Pressing [Start] displays a [Some items cannot be shown] message. A This message appears when all start menu items cannot be displayed in the default resolution

(800x480 pixels). In this case, change the screen resolution to 800x600 pixels or press the Auto Scaler button to change the resolution. Q9 When I press the Auto Scaler button, the letters on the screen are blurry. A For the resolutions provided by Auto Scaler, the letters on the screen may be blurred because these are not the optimal resolutions of the LCD panel. In this case, press the Auto Scaler button again and change the screen resolution to 800x480 pixels which is the default resolution of the LCD panel. Questions and Answers 115 Q10 I've run the Rotation function from the Menu, and the pointer on the screen does A not correspond to the pointer position. It is recommended using an external USB mouse when the screen is pivoted. If the above problem appears, complete the following steps. z Right-click on the TouchKit (

Pivot Support function is selected (V). If it is not selected, select it by selecting the Display Pivot Function. If you cannot find the TouchKit icon on the Taskbar, click Start > All Programs > TouchKit

> TouchMon. x Click on Start > All Programs > TouchKit > Configure Utility and click on 4-Point Calibration from the Tools tab. If the Stylus Pen Calibration screen appears, proceed accord-

ing to the instructions on the screen.

) icon from the Taskbar and confirm that the Display Q11 When using the 'Mouse Function' Rotation function using the joystick, the pointer on the screen may move in a different direction from that of the joystick. A When using the Rotation function, use the Stylus Pen or external USB mouse. The Mouse Function is a function that enables moving the pointer by moving the joystick while holding down the Menu button.

(See Using the Buttons in the 'Getting Started Manual'.) Q12 The rotation function does not work. A If the Rotation function does not work, run the 'Setup.exe' file in the 'C:\Program Files\samsung\Graphics Driver' folder. If you have reinstalled Windows, reinstall the Graphics Driver using the supplied 'System Software Media'. Sound Related Q1 How can I configure the Recording Mixer while I am video or audio chatting?

A z Double-click the volume icon from the Taskbar and select Options > Properties from the menu. x In the Mixer device field, select Realtek HD Audio Input. c Unselect 'Mute all' in the Recording control and unselect 'Mute' in the Microphone volume. v Select 'Mute' in the Stereo Mixer. Q2 How can I configure the Recording Mixer while playing music in WinAMP?

A z Double-click the Volume icon in the Taskbar and click on Options. x In the Mixer device field, select Realtek HD Audio Input. c Unselect 'Mute all' in the Recording control and unselect 'Mute' in the Microphone volume. v Unselect 'Mute' of the Stereo Mixer. Questions and Answers 116 Wireless LAN Related Q1 I cannot find an AP. Check the Wireless LAN LED. A Check if the Wireless LAN LED is on. If off, click the Menu button and select Wireless LAN ON to turn the Wireless LAN on. Reinstall the driver using the software media. Reinstall the driver. A Check the Wireless Zero Configuration (WZC) service. A If the "Windows cannot make this wireless connection" message appears while searching for wireless networks, it indicates that a program other than Windows is set to manage the wire-

less LAN settings. To use the wireless LAN settings using Windows:

A z Click Start > Control Panel > Network and Internet Connections > Network Con-

nections > Wireless LAN Connection, right-click and check if the "Windows manages wire-

less network settings (W)" option is selected in the Wireless Network tab of the Properties window. If not, select the option. x Click Start > Control Panel > Performance and Maintenance > Administrative Tools > Computer Management and click Services and Applications > Services. In the right pane, double-click the Wireless Zero Configuration and check if the Startup Type is Automatic and the Status is Started. Q2 I cannot connect to an AP. (The wireless connection is disconnected frequently.) Check the Network Key. A Right-click the Wireless Network Connections icon from the Taskbar and click on 'View available wireless networks'. If wireless networks are found, it indicates that the device is operating properly but the network settings may have a problem. Please check the Network Key (Encryption Key) and the AP settings. Check if there is a device nearby using the same frequency band. A1 If there is a device nearby using the same frequency band such as another wireless LAN de-

vice, wireless video transceiver, microwave oven, plasma bulb, etc., channel interference may occur. If you experience interference from another device, it is recommended changing the AP channel. A2 When operating in EEE802.11g mode, if there is a IEEE802.11b device operating nearby, you may experience low data rates or even disconnection as it operates in Hybrid mode. Check the authentication type. A A connection may be disconnected after a period of time if the "Use IEEE 802.1x network au-

thentication" option is selected when IEEE 802.1x authentication is not being used. View the properties of the corresponding AP in the Wireless Network Properties. In the Au-

thentication tab, unselect the "Use IEEE 802.1x authentication in this network" option. For detailed information on the authentication server, ask your network administrator. Questions and Answers 117 Check the AP settings. A1 Check if the surroundings are appropriate for a wireless LAN. A wireless LAN connection may be limited by the surrounding environment and distance. Obstacles such as walls and door mats affect the quality of the wireless LAN signal. You have to install an AP in a high, open position far away from any other radio signal sources. If the AP is excessively far away, or is installed at the end of a building and you are attempting to use the wireless LAN from the other end, you may not be able to use the wireless communication normally because the signal is blocked by obstacles between you and the AP (such as a wall). A2 Check if the AP operates properly. If the AP is not operating properly, turn it off and on again and try again. A3 Check if the AP firmware is the latest version. (For more information on the AP firmware, ask the AP manufacturer or your product provider.) A4 Check if the AP is properly connected to the network. Connect the LAN cable from the AP to a computer and check if the network is connected properly. A5 Check the Network Key (Encryption Key) settings again. If the automatic password converting function (passphrase function) is enabled and the wire-

less connection is normal but you cannot send data over the connection, please enter the Net-

work Key (Encryption Key) manually. A6 Check the AP settings as follows. If there are multiple APs running at the same time, check the channel setting of each AP. If the interval between the channels of the APs is narrow, you may experience electromagnetic interference. Set the channel numbers of the APs so that the internals between the channels are maximized. (E.g., Ch1, Ch5, Ch9, Ch13) If the SSID option is set to Hide, you will not be able to find the AP on your computer. It is recommended unselecting the Hide option of the AP. SSID (Service Set ID) is a name used to distinguish a wireless LAN from other wireless LANs. It is recommended using Long Preamble. Preamble is a signal for data transmission synchro-

nization. Although some APs support Short Preamble, there might be a compatibility problem. Because 'Fixed' channel selection is more stable then 'Auto' channel selection, 'Fixed' channel selection is recommended. It is recommended not using the 'Block Any' and 'Any Connection Block' functions. Although these functions block connections at the client side when the net-

work name is Any or Blank, it may cause a compatibility problem. For more information on the AP settings, refer to the owner's manual supplied with the AP. Q3 Although a connection has been established, I cannot connect to the Internet. Check the TCP/IP settings. A If you cannot connect to the Internet but you are connected to an AP, check if the TCP/IP settings are configured properly. When you are not connected to an AP, an X mark appears over the 'Wireless Network Connec-

tions' (

) icon in the Taskbar. If you double-click the icon, the Search for Wireless Connec-

tions window appears. Reconnect to a wireless network referring to the descriptions of Connecting to a Wireless LAN in the Using the Network section. When you are connected to an AP, an X mark appears over the 'Wireless Network Connections'

(

) icon in the Taskbar. Double-click the icon and check if the IP address is properly allocat-

ed on the Support tab. If the IP address is not properly allocated, the IP address will be dis-

played as follows; (e.g. 169.254.xxx.xxx). Questions and Answers 118 If your network does not support DHCP, you have to manually configure an IP address by ask-

ing your network administrator. In addition, even if your network supports DHCP, the Internet connection may not be available if the DHCP server fails to allocate an IP address to your computer. A A A Q4 I have configured both wired and wireless connections with the same IP address, but the network connections do not work properly. You cannot use the same IP address for wired and wireless connections. To use only one IP address for both wired and wireless connections, you must disable one of them according to your requirements in Network Connections in the Control Panel. Q5 After installing the Wireless LAN Setting program, the "AEGIS Protocol (IEEE 802.1x)" protocol appears in the [Local Area Connect Properties] window. The protocol is a security authentication protocol that is automatically installed when the Wire-

less LAN Settings program is installed and does not affect the program operation. Q6 I want to use the Wireless LAN power saving function to extend the system battery use time. You can configure this in the Samsung Battery Manager program. Run the Samsung Battery Manager and select Options > Wireless LAN Power Saving > On from the menu. However, this setting may affect the performance of the Wireless LAN. In addition, the wireless LAN connection might be disconnected while configuring this. Questions and Answers 119 Games and Programs Related Q1 3D games cannot run, or some functions are not working. A Change the graphics setting of the game to '2D' or 'Software Renderer', then run the program again. Q2 While playing a game, pressing the Menu button or pressing the LCD/CRT item A does not work or the screen is not properly displayed. Some games and 3D application programs may change the display device control. Therefore, pressing the Menu button and clicking the LCD/CRT item may terminate the running program or may display an abnormal screen. Press the Menu button and press the LCD/CRT item before launching a program and do not press these buttons while running the program. Q3 The running speed of a game is too slow or too fast. A Change the setting of the Power Schemes to 'Always On'.

(Click the Start > Control Panel > Performance and Maintenance > Power Options > Power Schemes tab, then configure the Power schemes field to 'Always On'.) Q4 Some part of a game image is not displayed or is black. A This may happen when running a game designed for DirectX 8.1, such as NHL 2003, MVP Baseball 2003, etc. Q5 The picture is not displayed properly for some games. A Some games such as 'Harry Potter and the Sorcerer's Stone', 'Harry Potter and the Chamber of Secrets', etc. may not display the picture properly when the screen resolution is set to 1024x768 and the color quality is set to 32 bit. For these games, set the screen resolution to 1024x768, and the color quality to 16 bit. Q6 Game play is not performed smoothly on the screen. A For 3D games, the texture data for the 3D screen display is saved to the system memory. If there is insufficient system memory, the data is saved to the hard disk drive and loaded to memory when required. This operation may temporarily stop displaying the picture on the screen. In this case, lower the game resolution or the screen settings. (For Delta Force: Black Hawk Down, Medal of Honor, Battle Field, 1942, etc.) Q7 If I run a program, an error message appears or the program does not launch. A This may happen when the program does not support the 800x480 pixels resolution. This is caused by a program that is designed for a minimum resolution of 800x600 pixels and fails to support a resolution lower than its minimum resolution. In this case, change the screen resolution to 800x600 pixels or press the Auto Scaler button to change the resolution. Questions and Answers 120 Bluetooth Q1 The characters are broken when I receive a business card with Korean or Chinese characters using the Send Business Card function via Bluetooth. A1 If a business card with Korean or Chinese characters is sent by selecting the Select a busi-

ness card from files (*.vcf, *.vcd) option in the Send Business Card menu, the characters of the received business card will be broken because the character set of the business card is not set to the Korean or Chinese character set (CHARSET). To resolve this problem, edit the contents of the business card file directly. z Right-click a business card (*.vcf, *.vcd) to be transmitted and select Connect a program

> Select a program. x Select Notepad from the program list. c Modify the contents of the file as follows. Example) N:MagicSense => N;CHARSET=KS_C_5601:MagicSense For Korean, add "CHARSET=KS_C_5601". For Chinese Simplified (CHS), add "CHARSET=gb2312". For Chinese Traditional (CHT), add "CHARSET=Big5". A2 When sending a business card directly from the address book of Microsoft Outlook, or sending it by selecting the Select an Outlook business card option in the Send Business Card menu, you can properly send a business card with Korean or Chinese characters without editing the VCF file. Q2 I cannot locate or connect the headset. A1 If the headset is connected to another device and is being used, you will not be able to locate it on your computer and connect to it even if it is found. To resolve this problem, disconnect the headset from the currently connected device and locate it again. A2 If the headset is connected to the power adapter, it cannot be connected through the Blue-

tooth connection. In this case, disconnect the headset from the power adapter and try again. A3 In general, a Bluetooth headset has two operating modes - On/Off mode and Pairing mode. To connect a headset to another Bluetooth device such as a PC or cellphone, it must be in Pairing mode. Switch the headset to Pairing mode and try to locate it again. In general, a headset automatically switches from Pairing mode to On/Off mode after a pre-

determined period of time. Q3 I have connected the headset, but sound is heard intermittently or not at all. A1 If a Bluetooth headset is connected to a PC, the Sound playback device in the Control Panel is to be changed to Bluetooth Audio (for a mono headset) or High Quality Blue-

tooth Audio (for a stereo headset). If the Sound playback device in the Control Panel is not changed properly, there may be no sound through the headset. Check the audio settings of the Control Panel according to the procedures given below. Configuring the Audio Device in the Control Panel z Click Start > Control Panel and double-click on Sound and Audio Devices. x Select the Audio tab in the Sound and Audio Devices Properties window. c Check if the Sound playback device and the Sound recording device are set to Bluetooth Audio (for a mono headset) or High Quality Bluetooth Audio (for a stereo headset). Questions and Answers 121 A2 When using a Bluetooth headset with another Bluetooth device, you may experience no sound, data transmission rate degradation, transmission errors or the disconnection of the device. Therefore, it is recommended not using another Bluetooth device when using a Bluetooth headset. A3 Check if the headset is properly connected and working properly. A4 Check the volume level of the headset and PC. A5 When running a multimedia program such as Windows Media Player that accesses the audio device, a headset may not be properly connected or used. To resolve this problem, exit the multimedia program, connect the headset and then launch the multimedia program again. Security Center Q1 How do change change the popup window display settings when connected to the Internet. In the Windows XP SP2 environment, you can decide whether to display a popup window when connected to the Internet, for user convenience and se-

curity. A1 To display most of the popup windows when connected to the Internet:

z Select the Internet Options in Start > Control Panel > Security Center > Manage security settings for. x In the Privacy tab of Internet Properties, clear Block pop-ups. A2 To only display popup windows from the current site when connected to the Internet:

Place the cursor on the notification area at the bottom of the Internet address bar and right-

click to display a menu, from which you can select Temporarily Allow Pop-ups or Always Allow Pop-ups from This Site. A3 To display popup windows from a particular site:

z Click on Internet Options in Start > Control Panel > Security Center > Manage security set-

tings for. x In the Privacy tab of Internet Properties, click on Settings from Block pop-ups. c Enter a URL for which to allow pop-ups for into the Address of Websites to allow and click on Add. v The entered address is added to the allowed sites list. The next time you connect to the website, you will see pop-ups appearing. When you need to re-block a permitted site, select the website address that you want to block from the Allowed Sites and click on Remove. Q2 When connecting to a website, the message, To help protect your security, Inter-

net Explorer stopped this site from installing an ActiveX control on your computer or This site might require the following ActiveX control is displayed below the ad-

dress bar. A Windows XP SP2 blocks unsigned ActiveX controls from being installed when connected to cer-

tain websites for security reasons. On some Websites that have no ActiveX controls installed, applications are not started or do not display properly. In this case, to install ActiveX controls, right-click the notification area to display a menu from which you can select Install ActiveX control. Questions and Answers 122 Q3 When a Windows Security Alert icon (

) appear on the right part of the task bar. With the Security Center feature added, Windows XP SP2 checks the Firewall, the automatic updates configuration and installation of virus-checking pro-

grams to display a Windows Security Alert icon on the right part of the task bar when it judges that the computer is vulnerable to attacks from the Inter-

net. In this case, check the following to install the necessary components. A1 Configure the Windows Firewall. When configuring the Windows Firewall, you will be protected from unauthorized access through the Internet or the network. z Click on Windows Firewall in Start > Control Panel > Security Center > Manage security settings for. x From the General tab of Windows Firewall, select ON (recommended). c To allow certain program or service to gain access to your computer via the Firewall, select and check the program or service that you want to allow access from, in the Exceptions tab of the Windows Firewall. If you want to add a program to Programs and Services, click on Add Program and select it. A2 Setting up Windows Automatic Updates. This automatically downloads and installs critical updates via the Internet to keep your com-

puter up to date. z Click on Automatic Updates in Start > Control Panel > Security Center > Manage security settings for. x From general tab of the Automatic Updates window, select Automatic (recommended). A3 Keep your computer current with the latest virus updates. (ex: Norton Antivirus) Even when Norton AntiVirus is installed on your computer, Windows cannot recognize the pro-

gram until you configure the settings, displaying a Security Alert icon. When first using or installing Norton AntiVirus, follow the Registration Wizard steps to config-

ure the registration settings. To protect your computer from virus attacks with the latest updates, click on Options to display the Norton AntiVirus Options window. From the left menu of the window, check Run Automatic Protection to select Automatic Protection and check Run LiveUpdate to select LiveUpdate. A4 Two virus scanning programs on one computer may cause a system conflict. Remove one of the programs from the system. A5 If Windows does not recognize the existence of an anti-virus program even when it has been installed, your computer could be vulnerable to attacks from the Internet. You should install an anti-virus program that your computer is able to identify. Check the following programs which Windows can detect and select one from the list. A list of anti-virus programs that Windows can detect:

-Symantec Norton Anti-Virus

-NetworkAssociates (McAfee)

-TrendMicro

-ComputerAssociates

-Panda

-Kaspersky

-Ahnlabs (AhnLab) Questions and Answers 123 Visit the Microsoft Web site (www.microsoft.com) regularly to check the latest list. Other Q1 I cannot run any functions. A1 This may happen when the computer is in the HOLD status. When pressing a button or switch

) blinks for a moment. Slide the HOLD switch down-

in the HOLD status, the Charge LED (

wards and try again. A2 If the computer is running on battery power, check the battery charge status. Q2 The [Power Switch] and the [AVStation NOW] switch do not work. A1 This may happen when the computer is in the HOLD status. When pressing a button or switch

) blinks for a moment. Slide the HOLD switch down-

in the HOLD status, the Charge LED (

wards and try again. A2 To use the switch, you have to slide and hold the switch for more than 0.1 seconds. Slide and hold the switch for more than 0.1 seconds before releasing it. A3 If the computer is running on battery power, check the battery charge status. Q3 I've hidden the Taskbar, but I cannot display it again. A If the Taskbar is behind the screen, you cannot display it with the Stylus Pen. In this case, press the Menu button to display the Taskbar again. Q4 How can I install a program onto my computer?

A To install a program to the UMPC, you have to purchase one of the following devices. For more information, refer to the Installing Programs of the 'Getting Started Guide'. External USB ODD Designed for UMPC or other compatible external USB ODD External USB HDD USB Data Cable Q5 Precautions for Using a Portable USB Keyboard A When using a Portable USB Keyboard Designed for UMPC, which is sold separately, if you selected Backlit OFF (Screen Off) by pressing the <Fn>+<F5> keys, you must press the <Fn>+<F5> keys on the USB keyboard to select Backlit ON (Screen On) because if the backlight is off while using the USB keyboard, the backlight does not turn on even if you touch the computer screen. The Portable USB Keyboard is equipped with a Pointing Stick that can be used instead of a mouse. Another pointing stick cap is supplied with the USB keyboard. If you need to replace the cap, pull the cap out and install the new cap. Questions and Answers 124 Specifications System Specifications The system specifications will be described below. The system specifications may differ depending on the derived models. Item CPU Specification Intel Celeron M ULV Cache memory Celeron (512KB) Main memory 256MB ~ Max 1GB, Memory type : DDR2 SODIMM Main Chipset Intel 915GMS / 400 MHz FSB Support, Intel ICH6-M Hard disk drive

(HDD) Graphics Sound 1.8" HDD 20 ~ 60GB Intel 915GMA 900 Graphics AD1986 (2CH) Remarks Optional Optional Optional Optional Optional Optional Network Interface Wired LAN: Marvell Yukon 88E8036 PCI-E Fast Ethernet Controller Wireless LAN: 802.11BG Bluetooth 2.0+EDR Optional Optional Optional CF Card Slot Type I and II Compatible Ports USB 2.0 x 2, Video (Monitor) Out Port, Headphone Jack, Wired LAN Port, DC-in Jack, External ODD Power Port Dimensions (mm) 227.5 x 138 x 24~25.7 LCD Weight Battery 7" WVGA (800x480) 746g (Including the Bluetooth modules) Lithium-Ion smart battery: 3 Cells or 6 Cells Operation Environ-

ment Temperature (storage) : -5 ~ 40C (operation) : 10 ~ 32 C Humidity (storage) : 5% ~ 90% (operation) : 20% ~ 80%

Optional W x D x H Optional Optional Operating Voltage 100 - 240 VAC Frequency 50 - 60 Hz Output Power 60W Output Voltage 19.0VDC The system specifications are subject to change without notice. For detailed system specifications, refer to the product catalog. Specifications 125 Wireless LAN Specifications (Optional) Atheros AR5006EX Wireless Network Adapter Device Product Specification Item Physical Specifications Power Specifications Detailed Specifications Dimensions

(Width X Height) 30 X 50.95 mm Operating Temperature and Humidity Same as system operation Temperature: 0C ~ 70C Humidity: 85%

Power Saving Mode Receiving Mode Transmission Mode Power 726mW 1.353W 2.046W 3.3V Network Specifications Compatibility IEEE 802.11g, IEEE 802.11b Operating System Microsoft Windows XP

- NDIS5 Miniport Driver Media Access Protocol CSMA/CA (Collision Avoidance) with Acknowledge-

ment(ACK) Security Wired Equivalent Privacy support (WEP) 64bit / 128bit

*WPA, *CCX

* This device supports the Wi-Fi wireless LAN security standard, WPA (Wi-Fi Protected Access) and CCX (Cisco Compatible eXtensions). To connect to a wireless network consisting of the WPA and CCX, certificates or Atheros Client Utility may be required depending on the network settings. For more information, ask your network administrator. Radio Specifications RF Band 2.4 GHz Support Channels Channels allowed per country. Device Transceiver Modulation Scheme 11b Mode: DSSS, CCK 11g Mode: OFDM Standard Output Power MAX 10 mW

*Transmission Rate

**11g mode: 54, 48, 36, 24, 18, 12, 9, 6 11b mode: 11, 5.5, 2, 1 Antenna Type 1ea internal antennas (main)

* The data rate may differ from the real data transmission rate.

**11g mode is supported only when the device is connected with an IEEE 802.11g device. (e.g. Access Point sup-

ported IEEE 802.11g) Specifications 126 Glossary You can find the terminologies in this User Guide listed in alphabetic order. For terminologies other than these, find them in the Windows Help. Backup A way to save the current data, which can be restored later if necessary. Backup is a way to restore computer data when the data or computer is damaged. Client This refers to a computer that uses a shared network resource provided by a server. DDR SDRAM (Double Date Rate Synchronous Dymamic Random Access Memory) DRAM is a memory type whose cells consist of a capacitor and transistor manufactured at a low price. SDRAM is a memory type whose performance is improved by synchronizing the clock with the ex-

ternal clock of the CPU. DDR SDRAM is a memory type whose performance has been improved by doubling the operating speed of the SDRAM and is widely used nowadays. This computer uses DDR SDRAM. Device Manager An administrative tool used to manage computer devices. You can add or remove hardware or up-

date a device driver using the Device Manager. Direct X An application interface that has been developed to enable Windows application programs to access hardware devices at a very high speed. Since the operating speed of graphics, memory and sound cards must be very fast to provide high quality video and sound for games, Direct X enables a faster control and interaction between applications and hardware devices. By using Direct X, the multime-

dia performance of Windows has been hugely improved. Driver Software that interacts between the hardware and the operating system. An operating system man-

ages and controls the hardware information. In general, a driver is supplied with the corresponding hardware device. DVD (Digital Versatile Disk) The DVD was developed to replace the CD (compact disk). Although the shape and size of a DVD are the same as a CD, the capacity of a DVD is at least 4.7GB while the capacity of a CD is 600MB. DVD video is digital unlike VHS video and supports MPEG2 compression and digital audio. To play a DVD, a DVD drive is required. Firewall A security system that is used to protect an internal network or intranet from external networks through an authentication procedure. Glossary 127 Hibernation Mode A power mode that saves all data in memory to the hard disk and turns the CPU and hard disk off. When canceling Hibernation Mode, all application programs that were running are restored to their last state. Icon This refers to a small image that represents an object that a user can use. LAN (Local Area Network) A communication network connecting computers, printers and other devices within a local area such as within a building. A LAN enables all connected devices to interact with other devices on the net-

work. The current LAN uses the Ethernet media access control method developed in the early 1980s. To connect to an Ethernet, a network card called a LAN card, Ethernet card or network interface card is required. To exchange data between computers, a protocol is required besides the hardware equipment. Windows XP uses TCP/IP as the default protocol. LCD (Liquid Crystal Display) There are Passive Matrix and Active Matrix LCD types. This computer uses the Active Matrix type LCD called TFT LCD. Since an LCD is implemented by transistors instead of a cathode-ray tube unlike a CRT, it can be slim. Because it does not blink, it reduces eye strain. Network A group of computers and devices, such as a printer and scanner, connected by a communications link. A network can be either small or large and can be connected permanently through cables or temporarily through a telephone lines or a wireless link. The biggest network is the Internet, a world-

wide network group. Network Administrator A user who plans, configures and manages the network operations. Sometimes, a network admin-

istrator is called a system administrator. Notification Area This refers to the right area of the Taskbar including program icons such as the volume control, the power options and the time. Power Schemes This refers to a pre-determined power management option group. For example, you can set the time the computer waits before entering Standby Mode, or before the monitor or hard drive turns off. The settings are saved as a power scheme. Quick Launch This refers to a toolbar that can be configured so that you can launch a program such as Internet Explorer or display Windows Desktop with one click. You can add any icon to the quick launch area of the Taskbar and launch frequently used program by clicking that icon. Glossary 128 Server In general, a server refers to a computer that provides shared resources for network users. Share This refers to configuring a resource of a computer such as a folder or printer so that other users can also use it. Shared Folder A folder that can be used by other users on the network. Standby Mode A power mode that enables a computer to save power consumption when not in use. When a com-

puter is in Standby Mode, the data on the computer memory is not saved onto the hard disk. If the power is tuned off, the data in memory will be lost. System Restore A tool that tracks computer changes and creates a restoration point when a change is made. If you restore your computer to a restoration point, you can restore your computer to the previous status that has been saved before the change, which caused a problem. System File System Files refer to files that are read and used by the Windows operating system. In general, sys-

tem files must not be deleted or moved. USB (Universal Serial Bus) This refers to a serial interface standard developed to replace the conventional interface standards such as Serial and PS/2. While USB 1.1 supports 12Mbps (12 million bits per second), USB 2.0 supports a data rate that is 40 times (480Mpbs) faster then that of USB 1.1. The data rate of USB 2.0 is equivalent to that of IEEE1394. Therefore USB 2.0 is used for A/V devices supported by IEEE 1394 and 2nd HDD and CD-

RW that require a high data rate. Windows The name of an operating system developed by Microsoft Corp. Windows XP Tablet PC Edition is installed on this computer,. Windows Media Player A multimedia program included with Windows. Using this program, you can play a media file, create an audio CD, listen to a radio broadcast, search and manage media files, copy files to a portable device, etc. Glossary 129 Index A AP / AP Connection Auto Scaler Button AVStation NOW AVStation premium B Battery Battery Calibration Battery Remaining Charge BIOS (BIOS, Setup) Setting Bluetooth / Help Booting Priority C Charge Click Control Panel CyberLink PowerDVD D Desktop Dual View DVD Play M Magic Doctor Maximum Battery Saving Mode Menu Button Monitor Connection / Output Multimedia Music Play N Network Network Status Diagnosis Norton AntiVirus O Overviews 46 30 79 69 96 101 101 89 55 95 97 20 40 64, 86 37 32 76, 86 103 99 27 31 63 70, 81 44 54 104 14 P Password Playlist Program Program Launcher Q Quick Launch Button R Resolution / Color S Samsung Battery Manager Samsung Network Manager Samsung Update Plus Slideshow Specifications Status Indicators Stylus Pen T Tablet PC Input Panel Writing Pad Character Pad On-Screen Keyboard Touchkit U User Account / Switch User V Video Play Volume Control W Windows XP Wireless Network 92 72 63 67 28 43 99 51 65 83 125 15 20 22 22 23 24 21 41 77, 84 26 35 45 Index 130 Important Safety Information Battery Disposal Do not place rechargeable batteries or products powered by non-removable rechargeable bat-

teries in the garbage. Contact the Samsung Helpline for information on how to dispose of batteries that are no longer re-

quired. Follow all local regulations when disposing of old batteries. Laser Safety All systems equipped with CD or DVD drives comply with the appropriate safety standards, including IEC 825. The laser devices in these components are classified as Class 1 Laser Products under a US Department of Health and Human Services (DHHS) Radiation Performance Standard. Should the unit ever need servicing, contact an authorized service location. Laser Safety Note Use of controls, or adjustments, or performing procedures other than those specified in this man-

ual may result in hazardous radiation exposure. To prevent exposure to laser beams, do not try to open the enclosure of a CD or DVD drive. Power Cord Requirements The power cord set (wall plug, cable and AC adapter plug) received with your computer meets the requirements for use in the country where the equipment was purchased. Power cord sets for use in other countries must meet the requirements of the country where the computer is used. For more information on power cord set requirements, contact an authorized deal-

er, reseller, or service provider. General Requirements The requirements listed below are applicable to all countries:

The length of the power cord set must be at least 6.00 feet (1.8m) and a maximum of 9.75 feet

(3.0m). All power cord sets must be approved by an acceptable accredited agency responsible for evaluation in the country where the power cord set will be used. The power cord set must have a minimum current capacity of 7 A and a nominal voltage rating of 125 or 250 volts AC, as required by each countrys power system. The appliance coupler must meet the mechanical configuration of an EN 60 320/IEC 320 Standard Sheet C7 connector, for mating with the appliance inlet on the computer. Important Safety Information 131 Regulatory Compliance Statements Wireless Guidance Low power, Radio LAN type devices (radio frequency (RF) wireless communication devices), oper-

ating in the 2.4 GHz Band, may be present (embedded) in your notebook system. The following sec-

tion is a general overview of considerations while operating a wireless device. Additional limitations, cautions, and concerns for specific countries are listed in the specific country sections (or country group sections). The wireless devices in your system are only qualified for use in the countries identified by the Radio Approval Marks on the system rating label. If the country you will be using the wireless device in, is not listed, please contact your local Radio Approval agency for the requirements. Wireless devices are closely regulated and using them may be restricted. The power output of the wireless device or devices that may be embedded in your notebook is well below the RF exposure limits as known at this time. Because the wireless devices (which may be embedded in your notebook) emit less energy than permitted by the radio frequency safety stan-

dards and recommendations, the manufacturers believe these devices are safe for use. Regardless of the power levels, care should be taken to minimize human contact during normal operation. This transmitter must not be collocated or operate in conjunction with any other antenna or trans-

mitter except for the installed Bluetooth transmitter. Some circumstances require restrictions on wireless devices. Examples of common restrictions are listed below:

Radio frequency wireless communication can interfere with equipment on commercial aircraft. Current aviation regulations require wireless devices to be turned off while travelling in an air-

plane. 802.11B/G (also known as wireless Ethernet or Wifi) and Bluetooth communication devic-

es are examples of devices that provide wireless communication. In environments where the risk of interference to other devices or services is harmful or per-

ceived as harmful, the option to use a wireless device may be restricted or eliminated. Airports, Hospitals, and Oxygen or flammable gas laden atmospheres are limited examples where use of wireless devices may be restricted or eliminated. When in environments where you are uncertain of whether wireless devices can be used, ask the applicable authority for authorization prior to use or turning on the wireless device. Every country has different restrictions on the use of wireless devices. Since your system is equipped with a wireless device, when travelling between countries with your system, check with the local Radio Approval authorities prior to any move or trip for any restrictions on the use of a wireless device in the destination country. If your system came equipped with an internal embedded wireless device, do not operate the wireless device unless all covers and shields are in place and the system is fully assembled. Regulatory Compliance Statements 132 Wireless devices are not user serviceable. Do not modify them in any way. Modification to a wire-

less device will void the authorization to use it. Please contact the respective manufacturer for servicing. Only use drivers approved for the country in which the device will be used. See the manufacturer System Restoration Kit, or contact manufacturer Technical Support for additional information. United States of America USA and Canada Safety Requirements and Notices Do not touch or move the antenna while the unit is transmitting or receiving. Do not hold any component containing the radio so that the antenna is very close or touching any exposed parts of the body, especially the face or eyes, while transmitting. Do not operate the radio or attempt to transmit data unless the antenna is connected; if not, the radio may be damaged. Use in specific environments:

The use of wireless devices in hazardous locations is limited by the constraints posed by the safety directives of such environments. The use of wireless devices on airplanes is governed by the Federal Aviation Administration (FAA). The use of wireless devices in hospitals is restricted to the limits set forth by each hospital. Explosive Device Proximity Warning Do not operate a portable transmitter (such as a wireless network device) near unshielded blasting caps or in an explosive environment unless the device has been modified to be qualified for such use. Using On Aircraft Warning Regulations of the FCC and FAA prohibit airborne operation of radio-frequency wireless devices because their signals could interfere with critical aircraft instruments. Other Wireless Devices Safety Notices for Other Devices in the Wireless Network: Refer to the documentation supplied with wireless Ethernet adapters or other devices in the wireless network. The Part 15 radio device operates on a non-interference basis with other devices operating at this frequency. Any changes or modification to said product not expressly approved by Samsung could void the user's authority to operate this device. Regulatory Compliance Statements 133 Unintentional Emitter per FCC Part 15 This device complies with Part 15 of the FCC Rules. Operation are subject to the following two con-

ditions:(1) this device may not cause harmful interference, and (2) this device must accept any in-

terference received, including interference that may cause undesired operations. This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference. If this equipment does cause harmful interference to radio or tele-

vision reception, which can be determined by turning the equipment off and on, the user is en-

couraged to try to correct the interference by following one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the distance between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is Consult the dealer or an experienced radio/TV technician for help. connected. If necessary, users should consult the dealer or an experienced radio/television technician for addi-

tional suggestions. Users may find the following booklet helpful: Something About Interference. This is available at FCC local regional offices. Our company is not responsible for any radio or tele-

vision interference caused by unauthorized modifications of the equipment or the substitution or at-

tachment of connecting cables and equipment other than those specified by our company. The correction will be the responsibility of the user. Use only shielded data cables with this system. Intentional emitter per FCC Part 15 Low power, Radio LAN type devices (radio frequency (RF) wireless communication devices), oper-

ating in the 2.4 GHz Band, may be present (embedded) in your notebook system. This section is only applicable if these devices are present. Refer to the system label to verify the presence of wire-

less devices. Wireless devices that may be in your system are only qualified for use in the United States of America if an FCC ID number is on the system label. This transmitter must not be collocated or operate in conjunction with any other antenna or trans-

mitter except for the installed Bluetooth transmitter. Operation of this device is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interfer-

ence that may cause undesired operations of the device. Wireless devices are not user serviceable. Do not modify them in any way. Modification to a wire-

less device will void the authorization to use it. Contact the manufacturer for servicing. Regulatory Compliance Statements 134 European Union European Union CE Marking and Compliance Notices Products intended for sale within the European Union are marked with the Conformit Europene

(CE) mark, which indicates compliance with the applicable Directives and European standards and amendments identified below. This equipment also carries the Class 2 identifier. The following information is only applicable to systems labeled with the CE mark

. European Directives This Information Technology device has been tested and found to comply with the following Euro-

pean directives:

EMC Directive 89/336/EEC with amending directives 92/31/EEC & 93/68/EEC as per EN 55022 Class B EN 61000-3-2 EN 61000-3-3 EN 55024 Low Voltage Directive (Safety) 73/23/EEC as per EN 60950(A1/A2/A3/A4/A11) Radio and Telecom Terminal Equipment Directive 199/5/EC as per CTR21 (if fitted with a modem device) ETS 300 328 (if fitted with a 2.4 GHz band embedded wireless device) ETS 301 489-1 (if fitted with a 2.4 GHz band embedded wireless device) ETS 301 489-17 (if fitted with a 2.4 GHz band embedded wireless device) European Radio Approval Information (for products fitted with EU-approved radio devices) This Product is a Notebook computer; low power, Radio LAN type devices (radio frequency (RF) wireless communication devices), operating in the 2.4 GHz band, may be present (embedded) in your notebook system which is intended for home or office use. This section is only applicable if these devices are present. Refer to the system label to verify the presence of wireless devices. Wireless devices that may be in your system are only qualified for use in the European Union or associated areas if the CE mark The power output of the wireless device or devices that may be embedded your notebook is well below the RF exposure limits as set by the European Commission through the R&TTE directive. with the Alert Symbol is on the system label. See 802.11b and 802.11g restrictions for specific countries or regions within countries under the heading European Economic Area Restrictions below. Regulatory Compliance Statements 135 Translated Statements of Compliance European Economic Area Restrictions Local Restriction of 802.11b/802.11g Radio Usage

[Note to integrator: The following statements on local restrictions must be published in all end-user documentation provided with the system or product incorporating the Wireless product.]

Due to the fact that the frequencies used by 802.11b/802.11g wireless LAN devices may not yet be harmonized in all countries, 802.11b/802.11g products are designed for use in specific coun-

tries or regions only, and are not allowed to be operated in countries or regions other than those designated. As a user of these products, you are responsible for ensuring that the products are used only in the countries or regions for which they were intended and for verifying that they are configured with the correct selection of frequencies and channels for the country or region of use. Any de-

viation from permissible settings and restrictions in the country or region of use could be an in-

fringement of local law and may be punishable as such. Regulatory Compliance Statements 136 The European variant is intended for use throughout the European Economic Area. However, autho-

rization for use is further restricted in particular countries or regions within countries, as follows:

General European standards dictate a maximum radiated transmit power of 100 mW effective isotropic ra-

diated power (EIRP) and the frequency range 2400 2483.5 MHz. Belgium The product may be used outdoors, but for outdoor transmissions over a distance of 300m or more, a license from the BIPT is required. This restriction should be indicated in the manual as follows:

Dans le cas d'une utilisation prive, l'extrieur d'un btiment, au-dessus d'un espace public, aucun enregistrement n'est ncessaire pour une distance de moins de 300m. Pour une distance suprieure 300m un enregistrement auprs de l'IBPT est requise. Pour une utilisation publique l'extrieur de btiments, une licence de l'IBPT est requise. Pour les enregistrements et licences, veuillez con-

tacter l'IBPT. France For Metropolitan departments:

2.400 - 2.4835 GHz for indoor use. 2.400 -2.454 GHz (channels 1 to 7) for outdoor use. For Guadeloupe, Martinique, St Pierre et Miquelon, Mayotte:

2.400 - 2.4835 GHz for indoor and outdoor use. For Reunion, Guyane:

2.400 - 2.4835 GHz for indoor use. 2.420 - 2.4835 GHz for outdoor use (channels 5 to 13) Regulatory Compliance Statements 137 WEEE Symbol Information Correct Disposal of This Product

(Waste Electrical & Electronic Equipment)

(Applicable in the European Union and other European countries with separate collection systems) The marking shown on the product or in the literature, indicates that it should not be disposed of with other household wastes at the end of its working life. To prevent possible harm to the environ-

ment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources. Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take this item for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase con-

tract. This product should not be mixed with other commercial waste for disposal. WEEE Symbol Information 138 Contact SAMSUNG WORLD WIDE

[U.S.A. / U.K. / AUSTRALIA / HONG KONG / INDIA / MALAYSIA / SINGAPORE]

Contact SAMSUNG WORLD WIDE If you have any comments or questions regarding a Samsung product, contact the SAMSUNG Cus-

tomer Care Center. Customer Care Center TEL WebSite U.S.A. U.K. AUSTRALIA HONG KONG INDIA MALAYSIA SINGAPORE 1 800 SAMSUNG (7267864) www.samsung.com 0870 242 0303 1300 362 603 2862 6001 www.samsung.com/uk www.samsung.com/au www.samsung.com/hk 3030 8282 / 1600 1100 11 www.samsung.com/in 1800-88-9999 www.samsung.com/my 1800-SAMSUNG(7267864) www.samsung.com/sg

[FRANCE] Comment contacter Samsung dans le monde Si vous avez des suggestions ou des questions concernant les produits Samsung, veuillez contacter le Service Consommateurs Samsung. Customer Care Center TEL FRANCE 08 25 08 65 65 WebSite www.samsung.fr

[GERMANY] Kontakt zu Samsung Falls Sie Fragen oder Anregungen zu Samsung-Produkten haben, wenden Sie sich bitte an den Sam-

sung-Kundendienst. Customer Care Center TEL GERMANY 01805 121213 WebSite www.samsung.de

[SPAIN] Contacte con SAMSUNG WORLD WIDE Si tiene alguna pregunta o comentario referente a nuestros productos, por favor contacte con nues-

tro Servicio de Atencion al Cliente. Customer Care Center TEL WebSite SPAIN 902 10 11 30 www.samsung.com/es Contact SAMSUNG WORLD WIDE 139

[PORTUGAL] Contacte SAMSUNG GLOBAL Se tem algumas dvidas ou comentrios sobre os produtos Samsung, contacte por favor a nossa linha de apoio a clientes Samsung. Customer Care Center TEL PORTUGAL 808 200 128 WebSite www.samsung.pt

[RUSSIA / UKRAINE] SAMSUNG Samsung, Samsung. Customer Care Center TEL 8-800-200-0400 8-800-502-0000 RUSSIA UKRAINE

[CHINA]

WebSite www.samsung.ru www.samsung.com/ur Customer Care Center TEL WebSite CHINA 800-810-5858 / (010) 64751880 www.samsung.com.cn

[THILAND]

Customer Care Center TEL WebSite THAILAND 1800-29-3232 / 02-689-3232 www.samsung.com/th Rev.1.1 Contact SAMSUNG WORLD WIDE 140

416 Maetan-Dong, Young-Tong-Gu, Suwon City, Gyungki-Do, 443-742 Korea Date: March 1, 2006 Compliance Certification Services Certification Division 561F Monterey Road Morgan Hill, CA 95037 To whom it may concern:

We, the undersigned, hereby authorize the Testing Division of Compliance Engineering Services, Inc., d.b.a. Compliance Certification Services and hereafter referred to as CCS, to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by CCS on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). In authorizing CCS Testing Division as our agent, we still recognize that we are responsible to:

a) comply with the relevant provisions of the certification program;

b) c) d) e) make all necessary arrangements for the conduct of the evaluation, including provision for examining documentation and access to all areas, records (including internal audit reports) and personnel for the purposes of evaluation (e.g. testing, inspection, assessment, surveillance, reassessment) and resolution of complaints;

make claims regarding certification only in respect of the scope for which certification has been granted;

do not use our product certification in such a manner as to bring the Certification Division into disrepute and not make any statement regarding our product certification which the Certification Division may consider misleading or unauthorized;

upon suspension or cancellation of certification, discontinue use of all advertising matter that contains any reference thereto and return any certification documents as required by the Certification Division;

f) g) h) i) j) use certification only to indicate the products are certified as being in conformity with specified standards;

endeavor to ensure that no certificate or report nor any part thereof is used in a misleading manner;

ensure that any reference to our product certification in communication media such as documents, brochures or advertising, complies with the requirements of the Certification Division;

keep a record of all complaints made known to the us relating to the products compliance with requirements of the relevant standard and to make these records available to the Certification Division when requested;

take appropriate action with respect to such complaints and any deficiencies found in products or services that affect compliance with the requirements for certification;

k) document the actions taken. This authorization is valid until further written notice from the applicant. Sincerely Yours, John SC Lee/Manager and Chief Engineer Samsung Electronics/PC R&D Division REMARK:

1. This authorization letter will be sent along with your application when filing with the Certification Division. Please follow the format and type it on company letterhead and send original to us. 2.

Regulatory WLAN Antenna Information (SANTAFE)

(English Language Required for Intel Regulatory Review / Approval)

(OEM/ODM or antenna vendor is required to complete this document with platform antenna information. Remove Intel references and make this your own document) SANTAFE Amphenol KAE Brand Name Model Name Antenna Vendor Antenna Part Number Main Antenna: SS-03-03-076 With WLAN Module WM3B2100

(Check Box) Aux Antenna:

WM3B2200BG WM3B2915ABG WM3945ABG Doc.No.:9.27.05 Rev 0.0 Regulatory WLAN Antenna Information 1/1 Doc.No.:9.27.05 Rev 0.0 Antenna Sample / Antenna Data Requirements for worldwide regulatory approval n o i t c e S Description of Required OEM / ODM Antenna Information 1A Part Number for Antenna only 1B Antenna Manufacturer Name 1C Description of Antenna Type Part number of Antenna Assembly / cable impedance, length & diameter. 1D 1E Main & Aux antenna (Peak Gain W/ cable loss) 1E OR 1F, 1G, 1H 1F Main & Aux antenna (Peak Gain only) 1G VSWR of cable including connector 1H Main & Aux antenna (Cable loss W/ connector) Dimensioned Photographs and Drawings of main &

auxiliary antennas Radiation patterns of antennas loaded in the host platform. Platform model name / number - correlated to antenna manufacturer and antenna part number Photograph(s) or Drawings showing location of antennas in platform. (S. Korea requires photographs of antennas for approval submission). Taiwan requires pictures of each antenna type shown in the system. Mech. drawings / photos with dimensions of antenna locations and distance from end-user (For evaluation of SAR testing requirement). Photograph(s) or Drawings showing the location of all antennas (WLAN, BT, other) and distance between those transmitting antennas. Information will be used to evaluate whether co-location testing is required. 2 3 4 5 6 7 8 EU US / IC Japan Taiwan Required Required Required Required Required Required Required Required Required N/A N/A N/A Required Desired Required Required Required Required Desired Desired Required Required Required Required Required Required Required Required Required Required Required Required S.Korea Required Required N/A Desired Required Required Required Required Required Required Required Required Required Required Desired Required N/A Required Required Required Desired Required Desired Required Required Desired Required

(Photos) Required

(Photos) Required N/A N/A N/A N/A Local representative contact information for LMA/

PARS process. Required N/A N/A N/A Required N/A N/A N/A N/A N/A Regulatory WLAN Antenna Information 2/2 Doc.No.:9.27.05 Rev 0.0 Antenna Information Section 1. Antenna Assembly Specifications Antenna Assembly Summary:

1A Antenna Part Number 1B Manufacture 1C Antenna Type

(P/N:

SS-03-03-081) Main antenna Amphenol KAE Co., Ltd PIFA 1D Cable Assembly Part Number and Information

(P/N:

SS-03-03-076) 50 ohm Coaxial. length: 160mm diameter:

1.37mm Connector:

MHC-231(KAE) 1E

*Peak Gain W/

Cable loss (dBi) 2400-2500MHz 1.71 dBi (peak) 5150-5350MHz 1.80 dBi (peak) 5470-5725MHz 4.79 dBi (peak) 5725-5850MHz 4.79 dBi (peak) 1F Peak Gain w/o Cable Loss

(dBi) 2400-2500MHz 2.10 dBi (peak) 5150-5350MHz 2.41 dBi (peak) 5470-5725MHz 5.45 dBi (peak) 5725-5850MHz 5.48 dBi (peak) 1G VSWR 2400-2500MHz 1.07 max 5150-5350MHz 1.19 max 5470-5725MHz 1.27 max 5725-5850MHz 1.16 max 1H Cable Loss

(dBi) 2400-2500MHz 0.39 dBi (peak) 5150-5350MHz 0.61 dBi (peak) 5470-5725MHz 0.65 dBi (peak) 5725-5850MHz 0.69 dBi (peak)

(P/N:

) Auxiliary antenna Antenna Peak Gain Table:

Frequency (MHz) Hori+Ver

(dBi) 1.71 dB 0.83 dB 0.81 dB 1.80 dB 1.72 dB 1.46 dB 1.99 dB 3.57 dB 4.79 dB 3.85 dB Vertical

(dBi)

-1.71 dB

-2.10 dB

-2.20 dB 1.77 dB 1.67 dB 0.63 dB 0.92 dB 1.51 dB 2.85 dB 2.56 dB Horizontal

(dBi) 0.94 dB

-0.37 dB

-1.40 dB

-2.24 dB

-2.15 dB 0.15 dB 0.30 dB 0.50 dB 1.59 dB 1.74 dB 2400 2442 2484 5150 5250 5350 5470 5600 5725 5850

Antenna Peak Gain required being test in system basis.

1E frame contend absolutely peak antenna gain include H/ V/ H+V. Main antenna Aux Antenna Horizontal

(dBi) Vertical

(dBi) Hori+Ver

(dBi) Regulatory WLAN Antenna Information 3/3 Doc.No.:9.27.05 Rev 0.0 Section 2. Dimensioned Photos or Drawings of Antennas Include a dimensioned photo and dimensioned drawing of main antenna here. Main Antenna Dimensioned Drawing:

Regulatory WLAN Antenna Information 4/4 Doc.No.:9.27.05 Rev 0.0 Main Antenna Photo:

Regulatory WLAN Antenna Information 5/5 Doc.No.:9.27.05 Rev 0.0 Section 3. Radiation characteristics of antennae Loaded in Host Platform 1. Main antenna Radiation pattern and gain 1.1 H-Phi(horizontal) 1.2 H-Theta(vertical) Regulatory WLAN Antenna Information 6/6 Doc.No.:9.27.05 Rev 0.0 1.3 H-Phi+ H-Theta 1.4 Peak gain (dBi) summary Frequency (MHz) Horizontal 2400 2442 2484 5150 5250 5350 5470 5600 5725 5850 0.94 dB

-0.37 dB

-1.40 dB

-2.24 dB

-2.15 dB 0.15 dB 0.30 dB 0.50 dB 1.59 dB 1.74 dB Vertical

-1.71 dB

-2.10 dB

-2.20 dB 1.77 dB 1.67 dB 0.63 dB 0.92 dB 1.51 dB 2.85 dB 2.56 dB Hori+Ver 1.71 dB 0.83 dB 0.81 dB 1.80 dB 1.72 dB 1.46 dB 1.99 dB 3.57 dB 4.79 dB 3.85 dB Regulatory WLAN Antenna Information 7/7 Doc.No.:9.27.05 Rev 0.0 Section 4. Host Platform Information OEM / ODM Host platform: (XXXXXXX) platform correlated to antenna data Rating Label Photo:

Module Location Photo: (if Singapore required) Regulatory WLAN Antenna Information 8/8 Doc.No.:9.27.05 Rev 0.0 Section 5. Antenna Host Platform Location Information Include a dimensioned photo or dimensioned drawing of main and auxiliary antenna placements. AUX ANTENNA XX.0 mm XX.0 mm MAIN ANTENNA XX.0 mm XX.0 mm XX.0 mm Regulatory WLAN Antenna Information 9/9 Doc.No.:9.27.05 Rev 0.0 Section 6. Antenna dimensional information for SAR evaluation Include a dimensioned photo or dimensioned drawing showing the distance (mm) between the transmit (main) antenna and the user (excluding hands, wrist, feet, and ankle) MAIN ANTENNA XX.0 mm XX.0 mm XX.0 mm Regulatory WLAN Antenna Information 10/10 Doc.No.:9.27.05 Rev 0.0 Section 7. Diagram Example of Co-Location Antenna Separation Include a dimensioned photo or dimensioned drawing showing the distance (mm) between WLAN antenna and 2nd radiator transmit antenna.

(Note: Due to the evolving rules regarding co-location, each platform will need to be reviewed on a case by case basis) XX.0 mm XX.0 mm XX.0 mm XX.0 mm OTHER ANTENNA

(BLUETOOTH) XX.0 mm OTHER MODULE

(BLUETOOTH) XX.0 mm WLAN MODULE XX.0 mm XX.0 mm XX.0 mm Regulatory WLAN Antenna Information 11/11 Doc.No.:9.27.05 Rev 0.0 Section 8. Local representative contact information Local representative contact information is required for regulatory support for target countries below. Local company name Contact name Phone number FAX Number e-Mail Address Notes Argentina Brazil Indonesia Israel Malaysia Mexico Singapore USA, Canada Telecommunication Equipment Dealer License Required Regulatory WLAN Antenna Information 12/12

Santafe Regulatory WLAN Antenna Information

(English Language Required for Intel Regulatory Review / Approval) Samsung Santafe Foxconn Brand Name Model Name Antenna Vendor Antenna Part Number Main Antenna: WDAN-S1SAT001-DF With WLAN Module WM3B2100

(Check Box) WM3B2200BG WM3B2915ABG WM3945ABG Doc.No.:3.8.05 Rev 6.0 Regulatory WLAN Antenna Information 1/1 Doc.No.:3.8.05 Rev 6.0 Antenna Sample / Antenna Data Requirements for worldwide regulatory approval n o i t c e S Description of Required OEM / ODM Antenna Information 1A Part Number for Antenna only 1B Antenna Manufacturer Name 1C Description of Antenna Type Part number of Antenna Assembly / cable impedance, length & diameter. 1D 1E Main & Aux antenna (Peak Gain W/ cable loss) 1E OR 1F, 1G, 1H 1F Main & Aux antenna (Peak Gain only) 1G VSWR of cable including connector 1H Main & Aux antenna (Cable loss W/ connector) Dimensioned Photographs and Drawings of main &

auxiliary antennas Radiation patterns of antennas loaded in the host platform. Platform model name / number - correlated to antenna manufacturer and antenna part number Photograph(s) or Drawings showing location of antennas in platform. (S. Korea requires photographs of antennas for approval submission). Taiwan requires pictures of each antenna type shown in the system. Mech. drawings / photos with dimensions of antenna locations and distance from end-user (For evaluation of SAR testing requirement). Photograph(s) or Drawings showing the location of all antennas (WLAN, BT, other) and distance between those transmitting antennas. Information will be used to evaluate whether co-location testing is required. 2 3 4 5 6 7 8 EU Japan Taiwan US / IC Required Required Required Required Required Required Required Required Required N/A N/A N/A Required Desired Required Required Required Required Desired Desired Required Required Required Required Required Required Required Required Required Required Required Required S.Korea Required Required N/A Desired Required Required Required Required Required Required Required Required Required Required Desired Required N/A Required Required Required Desired Required Desired Required Required Desired Required

(Photos) Required

(Photos) Required N/A N/A N/A N/A Local representative contact information for LMA/

PARS process. Required N/A N/A N/A Required N/A N/A N/A N/A N/A Regulatory WLAN Antenna Information 2/2 Doc.No.:3.8.05 Rev 6.0 Antenna Information Section 1. Antenna Assembly Specifications Antenna Assembly Summary:

1A Antenna Part Number 1B Manufacture 1C Antenna Type

(P/N:

WDAN-S1SAT0 01-DF) Main antenna PIFA HON HAI PRECISION IND. CO.,LTD 1D Cable Assembly Part Number and Information 1.Cable P/N:

FOXCONN:

703-3009-215 2.Cable type: 30 AWG O,D. 1.37 mm 50 ohm coaxial cable 3.Cable length: 182mm 4. Connector P/N:

IPEX: 073-0001-899

(P/N:) 1E

*Peak Gain W/

Cable loss

(dBi) 2400-2500MHz 1.67 dBi (peak) 5150-5350MHz 3.43 dBi (peak) 5470-5725MHz 3.61 dBi (peak) 5725-5850MHz 3.30 dBi (peak) 2400-2500MHz 1F Peak Gain w/o Cable Loss

(dBi) 2400-2500MHz 2.109 dBi (peak) 5150-5350MHz 4.103 dBi (peak) 5470-5725MHz 4.301 dBi (peak) 5725-5850MHz 4.019 dBi (peak) 2400-2500MHz 5150-5350MHz 5150-5350MHz 5470-5725MHz 5470-5725MHz 1G VSWR 2400-2500MHz 2.0 max 5150-5350MHz 2.0 max 5470-5725MHz 2.0 max 5725-5850MHz 2.0 max 2400-2500MHz 2.0 max 5150-5350MHz 2.0 max 5470-5725MHz 2.0 max 2.0 max 1H Cable Loss

(dBi) 2400-2500MHz

-0.439 dBi (peak) 5150-5350MHz

-0.673 dBi (peak) 5470-5725MHz

-0.691 dBi (peak) 5725-5850MHz

-0.719 dBi (peak) 2400-2500MHz 5150-5350MHz 5470-5725MHz 5725-5850MHz 5725-5850MHz 5725-5850MHz 5725-5850MHz Antenna Peak Gain Table:

Frequency (MHz) 2400 2442 2484 5150 5250 5350 5470 5600 5725 5800 5850 Horizontal

(dBi) 0.43 0.29

-1.01

-1.68

-2.23 0.31 0.98

-0.97

-0.83

-0.81 0.06 Main antenna Vertical

(dBi)

-0.84

-0.35

-1.09 1.84 2.75 2.85 2.87 3.00 2.22 1.89 1.94 Hori+Ver

(dBi) 1.67 1.66 1.05 2.81 3.03 3.43 3.61 3.52 3.21 2.93 3.30

Antenna Peak Gain required being test in system basis.

1E frame contend absolutely peak antenna gain include H/ V/ H+V. Regulatory WLAN Antenna Information 3/3 Doc.No.:3.8.05 Rev 6.0 Section 2. Dimensioned Photos or Drawings of Antennas Include a dimensioned photo and dimensioned drawing of main antenna here. Main Antenna Dimensioned Drawing:

Main Antenna Photo:

Regulatory WLAN Antenna Information 4/4 Doc.No.:3.8.05 Rev 6.0 Section 3. Radiation characteristics of antennae Loaded in Host Platform 2400-2500MHz radiation characteristic Main antenna: 2400 MHz Center Frequency Horizontal (dBi) peak Vertical (dBi) peak Horz+Vert (dBi) peak 2400 MHz 0.43

-0.84 1.67 Regulatory WLAN Antenna Information 5/5 Doc.No.:3.8.05 Rev 6.0 Main antenna: 2442 MHz Center Frequency Horizontal (dBi) peak Vertical (dBi) peak Horz+Vert (dBi) peak 2442 MHz 0.29

-0.35 1.66 Regulatory WLAN Antenna Information 6/6 Doc.No.:3.8.05 Rev 6.0 Main antenna: 2484 MHz Center Frequency Horizontal (dBi) peak Vertical (dBi) peak Horz+Vert (dBi) peak 2484 MHz

-1.01

-1.09 1.05 Regulatory WLAN Antenna Information 7/7 Doc.No.:3.8.05 Rev 6.0 5150-5350 MHz radiation characteristic Main antenna: 5150 MHz Center Frequency Horizontal (dBi) peak Vertical (dBi) peak Horz+Vert (dBi) peak 5150 MHz

-1.68 1.84 2.81 Regulatory WLAN Antenna Information 8/8 Doc.No.:3.8.05 Rev 6.0 Main antenna: 5250 MHz Center Frequency Horizontal (dBi) peak Vertical (dBi) peak Horz+Vert (dBi) peak 5250 MHz

-2.23 2.75 3.03 Regulatory WLAN Antenna Information 9/9 Doc.No.:3.8.05 Rev 6.0 Main antenna: 5350 MHz Center Frequency Horizontal (dBi) peak Vertical (dBi) peak Horz+Vert (dBi) peak 5350 MHz 0.31 2.85 3.43 Regulatory WLAN Antenna Information 10/10 Doc.No.:3.8.05 Rev 6.0 5470-5725MHz radiation characteristic Main antenna: 5470 MHz Center Frequency Horizontal (dBi) peak Vertical (dBi) peak Horz+Vert (dBi) peak 5470 MHz 0.98 2.87 3.61 Regulatory WLAN Antenna Information 11/11 Doc.No.:3.8.05 Rev 6.0 Main antenna: 5600 MHz Center Frequency Horizontal (dBi) peak Vertical (dBi) peak Horz+Vert (dBi) peak 5600 MHz

-0.97 3.00 3.52 Regulatory WLAN Antenna Information 12/12 Doc.No.:3.8.05 Rev 6.0 Main antenna: 5725 MHz Center Frequency Horizontal (dBi) peak Vertical (dBi) peak Horz+Vert (dBi) peak 5725 MHz

-0.83 2.22 3.21 Regulatory WLAN Antenna Information 13/13 Doc.No.:3.8.05 Rev 6.0 5725-5850 MHz radiation characteristic Main antenna: 5750 MHz Center Frequency Horizontal (dBi) peak Vertical (dBi) peak Horz+Vert (dBi) peak 5750 MHz

-0.81 1.89 2.93 Regulatory WLAN Antenna Information 14/14 Doc.No.:3.8.05 Rev 6.0 Main antenna: 5800 MHz Center Frequency Horizontal (dBi) peak Vertical (dBi) peak Horz+Vert (dBi) peak 5800 MHz 0.06 1.94 3.30 Regulatory WLAN Antenna Information 15/15 Doc.No.:3.8.05 Rev 6.0 Main antenna: 5850 MHz Center Frequency Horizontal (dBi) peak Vertical (dBi) peak Horz+Vert (dBi) peak 5850 MHz

-0.63 1.85 2.98 Regulatory WLAN Antenna Information 16/16 Doc.No.:3.8.05 Rev 6.0 Section 4. Host Platform Information OEM / ODM Host platform: (XXXXXXX) platform correlated to antenna data Rating Label Photo:

Module Location Photo: (if Singapore required) Regulatory WLAN Antenna Information 17/17 Doc.No.:3.8.05 Rev 6.0 Section 5. Antenna Host Platform Location Information Include a dimensioned photo or dimensioned drawing of main and auxiliary antenna placements. AUX ANTENNA XX.0 mm XX.0 mm MAIN ANTENNA XX.0 mm XX.0 mm XX.0 mm Regulatory WLAN Antenna Information 18/18 Doc.No.:3.8.05 Rev 6.0 Section 6. Antenna dimensional information for SAR evaluation Include a dimensioned photo or dimensioned drawing showing the distance (mm) between the transmit (main) antenna and the user (excluding hands, wrist, feet, and ankle) MAIN ANTENNA XX.0 mm XX.0 mm XX.0 mm Regulatory WLAN Antenna Information 19/19 Doc.No.:3.8.05 Rev 6.0 Section 7. Diagram Example of Co-Location Antenna Separation Include a dimensioned photo or dimensioned drawing showing the distance (mm) between WLAN antenna and 2nd radiator transmit antenna.

(Note: Due to the evolving rules regarding co-location, each platform will need to be reviewed on a case by case basis) XX.0 mm XX.0 mm XX.0 mm XX.0 mm OTHER ANTENNA

(BLUETOOTH) XX.0 mm OTHER MODULE

(BLUETOOTH) XX.0 mm WLAN MODULE XX.0 mm XX.0 mm XX.0 mm Regulatory WLAN Antenna Information 20/20 Doc.No.:3.8.05 Rev 6.0 Section 8. Local representative contact information Local representative contact information is required for regulatory support for target countries below. Local company name Contact name Phone number FAX Number e-Mail Address Notes Argentina Brazil Indonesia Israel Malaysia Mexico Singapore USA, Canada Telecommunication Equipment Dealer License Required Regulatory WLAN Antenna Information 21/21

416 Maetan-Dong, Youngtong-Gu, Suwon City, Gyungki-Do, 443-742 Korea Date: June 24, 2006 Federal Communications Commission Equipment Authorization branch 7435 Oakland Mills Road Columbia, MD 21046 Re: Request for Confidentiality Gentlemen:

Schematics Block Diagrams Theory of Operation . Sincerely, John SC Lee/Manager and Chief Engineer Samsung Electronics/PC R&D Division In reference to the application under FCC ID:A3L-NP-Q1-C, and pursuant to Sections 0.457(d)(l)(ii) and 0.459 of the Commissions Rules, the Applicant hereby requests confidential treatment of the accompanying information as outlined below:

These documents contain detailed system and equipment description and related information about the product that <Samsung and Atheros> considers to be proprietary, confidential, and a custom design and, otherwise, would not release to the general public. Since this design is a basis from which future technological products will evolve,

<Samsung and Atheros> considers that this information would be of benefit to its competitors, and that disclosure of the information in these documents would give competitors an unfair advantage in the market.

Helen Zhao Subject:

FW: answer: SAMSUNG ELECTRONICS CO., LTD., FCC ID: A3L-NP-Q1-C, Assessment NO.: AN06T5926, Notice#1 From:

Sent:

To:

Cc:

Subject:

Claire Hoque Wednesday, July 12, 2006 10:28 AM Helen Zhao Michael Heckrotte; Kathy Yao answer: SAMSUNG ELECTRONICS CO., LTD., FCC ID: A3L-NP-Q1-C, Assessment NO.: AN06T5926, Notice#1 Hi Helen, Pls see answer below, thanks. Question #1: The external photos does not show accessories, such as AC/DC power supply, etc. Please provide additional photos.

<answer> pls see revised external photos attached. Question #2: The EUT will be equipped with two kinds of antenna, either 1.71dBi KAE antenna or 1.67 Foxconn antenna. But the internal photos show only one antenna, please provide photos of both antennas and specify clearly.

<answer> pls see revised internal photos attached. Question #3: The Theory of Opeation exhibit indicates that "This product may utilize one of two available chip versions: AR2414 is a fully functional version and AR2413 is identical but with a Turbo feature disabled. This Turbo feature is not supported for European operation." Please explain whether EUT will have two versions in US market: 1) with 11g turbo mode (using AR2414 chip); 2) without 11g turbo mode (using AR2413 chip). If not, please modify theory of operation, if yes, please provide 11g turbo test data.

<answer> pls see revised theory of operation attached. Question #4: Please update EMC report in the following areas:

a) Bluetooth module has already got FCC approval, it is not covered in this filing. In section 5.1, please provide FCC ID of bluetooth module. b) The EMC test report provides 2 sets of test data: one for KAE antenna, one for Foxconn antenna, but section 5.3 - Description of available antennas does not include Foxconn antenna. If Hon Hai is the manufacturer of Foxconn antenna, please indicate clearly. c) The EUT is the notebook PC, not the wireless LAN card, but section 5.6 indicates "The EUT is installed inside a host laptop computer", please update. d) Radiated spurious emission test data (page 65/74/83/92) show S/N other than those listed on page 4. Please explain.

<answer> pls see revised EMC report attached. Question #5: EMC report shows average power at 11g mode @ 2412MHz is 11.50 dBm. SAR Test report shows SAR test was done with average power 13.80dBm at 11g mode @ 2412MHz, please explain why there is so big difference.

<answer> Power level was reduced to that level so that EUT could pass bandedge testing. Question #6: SAR test report: page 20 of test report shows signal generate was past due during the test. Please explain.

<answer> pls see revised SAR report attached. 06I10286-2C FCC SAR REPORT.pdf... Theory of peration -WLAN(revi 06I10286-1B FCC DTS Report.pd... Internal External Photos(revised).pdf Photos(revised).pdf Best Regards, 1 Helen Zhao The items indicated above must be submitted before processing can continue on the above referenced application. Failure to provide the requested information within 30 days of the original e-mail date may result in application dismissal and forfeiture of the filing fee. Also, please note that partial responses increase processing time and should not be submitted. Any questions about the content of this correspondence should be directed to the e-mail address listed below the name of the sender. 2