FCC ID: A3LEJPX710 S PEN

English Device layout Copyright 2020 Samsung Electronics America, Inc. Bluetooth is a registered trademark of Bluetooth SIG, Inc. worldwide. Other marks are the property of their respective owners. Please read this guide before using the device to ensure safe and proper use. Before using the S Pen, make sure it is compatible with your device. Your consumer rights are governed by the law of the country in which you purchased the product. Please contact your service provider for more information. S Pen button S Pen nib Using the S Pen Use the S Pen to perform touch actions or draw on the screen of your mobile device. You can use additional features by pressing the S Pen button (

When you attach the S Pen on the rear of your mobile device, charging will start. Refer to the mobile devices user manual for more information.

). a b Safety information Read all safety information before using the device to ensure safe and proper use. To view the full safety information, refer to the Samsung website. Use only charging devices and batteries approved by Samsung. Samsung accessories are designed for your device to maximize battery life. Using other accessories may invalidate your warranty and may cause damage Do not touch the device with wet hands Do not drop or cause an impact to the charger or the device Do not allow children or animals to chew or suck the device Do not disassemble, modify, or repair your device FCC 15.21 Warning against unauthorized change Pursuant to Part 15.21 of the FCC Rules, you are cautioned that changes or modifications not expressly approved by Samsung could void your authority to operate the device. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Depending on the region or model, some devices are required to receive approval from the Federal Communications Commission

(FCC). If your device is approved by the FCC, you can view the FCC ID of the device. To view the FCC ID, launch the Settings app and tap About phone Status. Samsung Mobile Products and Recycling Samsung cares for the environment and encourages its customers to properly dispose of Devices and Samsung accessories in accordance with local regulations. In some areas, disposal of these items in household or business trash may be prohibited. Dispose of other unwanted electronics through an approved recycler. To find the nearest recycling location, go to our website:

www.samsung.com/recyclingdirect or call 1-877-278-0799. Samsung Electronics America, Inc 85 Challenger Road, Ridgefield Park, New Jersey, 07660 Phone: 1-800-SAMSUNG (726-7864) QUICK START GUIDE EJ-PX710 S Pen Printed in Korea A00000 Rev.1.0 USA Type 06/2020 QUICK START GUIDE EJ-PX710 Printed in Korea A00000 Rev.1.0 CANADA Type 06/2020 English a b Copyright 2020 Samsung Electronics Bluetooth is a registered trademark of Bluetooth SIG, Inc. worldwide. Please read this guide before using the device to ensure safe and proper use. Before using the S Pen, make sure it is compatible with your device. Your consumer rights are governed by the law of the country in which you purchased the product. Please contact your service provider for more information. Device layout S Pen button S Pen nib Using the S Pen Use the S Pen to perform touch actions or draw on the screen of your mobile device. You can use additional features by pressing the S Pen button. When you attach the S Pen on the rear of your mobile device, charging will start. Refer to the mobile devices user manual for more information. Safety information Read all safety information before using the device to ensure safe and proper use. To view the full safety information, refer to the Samsung website. Use manufacturer-approved batteries, chargers, accessories, and supplies Do not touch the device with wet hands Do not drop or cause an impact to the charger or the device Do not allow children or animals to chew or suck the device Do not disassemble, modify, or repair your device FCC 15.21 Warning against unauthorized change Pursuant to Part 15.21 of the FCC Rules, you are cautioned that changes or modifications not expressly approved by Samsung could void your authority to operate the device. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Depending on the region or model, some devices are required to receive approval from the Federal Communications Commission

(FCC). If your device is approved by the FCC, you can view the FCC ID of the device. To view the FCC ID, launch the Settings app and tap About phone Status. FCC and IC RF Radiation Exposure Statement:

This equipment complies with FCC and IC RF Radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be co-

located or operating in conjunction with any other antenna or transmitter. RSS-Gen, Section 8.4 Statement IC Notice This device complies with Industry Canada licence exempt RSS standard(s). Operation is subject to the following two conditions:

1. This device may not cause interference. 2. This device must accept any interference, including interference that may cause undesired operation of the device. Depending on the region or model, some devices are required to receive approval from Innovation, Science and Economic Development Canada (ISED)/the Federal Communications Commission (FCC). If your device is approved by the ISED/FCC, you can view the ISED/FCC ID of the device. To view the ISED/FCC ID, launch the Settings app and tap About phone Status. RF du FCC et IC d'exposition aux radiations:

Cet quipement est conforme l'exposition de FCC et IC rayonnements RF limites -

tablies pour un environnement non contrl. Lantenne pour ce transmetteur ne doit pas tre mme endroit avec dautres metteur sauf conformment FCC et IC procdures de produits Multi-metteur. GUIDE DE DMARRAGE RAPIDE EJ-PX710 Franais (Canada) Prsentation de lappareil Bouton du S Pen Pointe du S Pen Utilisation du S Pen Utilisez le S Pen pour toucher lcran tactile ou pour dessiner sur lcran de votre appareil mobile. Vous pouvez utiliser dautres fonctionnalits en appuyant sur le bouton S Pen. Lorsque vous fixez le S Pen dans lemplacement du S Pen de votre appareil mobile, le chargement commencera. Reportez-vous au guide dutilisation de lappareil mobile pour plus de dtails ce sujet. Consignes de scurit Lisez toutes les consignes de scurit avant dutiliser lappareil pour vous assurer den faire une utilisation adquate et scuritaire. Pour consulter toutes les consignes de scurit, reportez-vous au site Web de Samsung. Utilisez des piles, des chargeurs, des accessoires et des fournitures approuvs par le fabricant. Ne touchez pas lappareil avec les mains mouilles. Ne laissez pas tomber lappareil ou le chargeur et ne les exposez pas des chocs. Ne laissez pas des enfants ou des animaux mcher ou sucer lappareil. Ne dmontez pas, ne modifiez pas et ne rparez pas vous-mme votre appareil. nonc CNR-Gen, section 8.4 Avis IC Cet appareil est conforme aux normes CNR dIndustrie Canada pour lquipement exempt de licence. Son utilisation est assujettie aux deux conditions suivantes:

1. Cet appareil ne doit causer aucune interfrence. 2. Cet appareil doit accepter toutes les interfrences reues, y compris celles qui pourraient provoquer un fonctionnement non souhaitable de lappareil. Selon la rgion ou le modle, certains appareils doivent recevoir une certification de Innovation, Sciences et Dveloppement conomique Canada (ISDE) et de la Commission fdrale des communications

(FCC). Si votre appareil est approuv par ISDE/FCC, vous pouvez trouver lID ISDE/

FCC de lappareil. Pour ce faire, ouvrez lappli Paramtres et touchez propos du tlphone tat. a b Samsung Electronics, 2020. Bluetooth est une marque dpose de Bluetooth SIG, Inc. partout dans le monde. Veuillez lire le prsent guide avant dutiliser lappareil afin de vous assurer den faire une utilisation scuritaire et adquate. Avant dutiliser le S Pen, assurez-vous quil est compatible avec votre appareil. Vos droits en tant que consommateur sont rgis par les lois du pays o vous avez achet le produit. Veuillez communiquer avec votre fournisseur de services pour obtenir de plus amples renseignements.

Description of E-label on the A3LEJPX710 April 4 th , 2023 IC: 649E-EJPX710 HVIN: EJ-PX710 FCC ID: A3LEJPX710 This model is applied E-label, please find description of E-label below. 1. ISED( E-label) - English: Settings > About phone> Status ISED( E-label) - French: Paramtres > propos du tlphone> tat S Pen FCC and ISED certification FCC ID: A3LEJPX710 IC: 649E-EJPX710 (EJ-PX710)

<Display Screen>

2. Instruction of E-label on the User manual (online manual) Depending on the region or model, some devices are required to receive approval from Innovation, Science and Economic Development Canada (ISED)/the Federal Communications Commission (FCC). If your device is approved by the ISED/FCC, you can view the ISED/FCC ID of the device. To view the ISED/FCC ID, launch the Settings app and tap About phone Status. Selon la rgion ou le modle, certains appareils doivent recevoir une certification de Innovation, Sciences et Dveloppement conomique Canada (ISDE) et de la Commission fdrale des communications (FCC). Si votre appareil est approuv par ISDE/FCC, vous pouvez trouver lID ISDE/FCC de lappareil. Pour ce faire, ouvrez lappli Paramtres et touchez propos du tlphone tat.

19 Chapin Rd., Building D Pine Brook, New Jersey, 07058, United States 03 April 2023 FederalCommunicationsCommission AuthorizationandEvaluationDivision 7435OaklandMillsRoad, Columbia,MD21046 LETTERFORAUTHORIZATION FCC ID: A3LEJPX710 Towhomitmayconcern:

I,theundersigned,herebyauthorizeSGSKoreaCo.,Ltd.and hereafterreferredtoasSGSKorea, toactonourbehalfinallmannersrelatingtoapplicationfor equipment authorization, includingsigningofalldocumentsrelating tothesematters.Anyandallactscarriedoutby SGSKoreaCo., Ltd.onourbehalfshallhavethesameeffectasactsofourown. I, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includesFCCbenefits,pursuanttoSection5301oftheAntiDrugAbuseActof1988,21U.S.C. 853(a). InauthorizingSGS Korea Co., Ltd.asouragent,westillrecognizethatweareresponsibleto:

a) complywiththerelevantprovisionsofthecertificationprogram;

b) makeallnecessaryarrangementsfortheconductoftheevaluation,includingprovision forexaminingdocumentationandaccesstoallareas,records(includinginternalaudit reports) and personnel for the purposes of evaluation (e.g. testing, inspection, assessment,surveillance,reassessment)andresolutionofcomplaints;

c) makeclaimsregardingcertificationonlyinrespectofthescopeforwhichcertification hasbeengranted;

d) do not use our product certification in such a manner as to bring the Certification Divisionintodisreputeandnotmakeanystatementregardingourproductcertification whichtheCertificationDivisionmayconsidermisleadingorunauthorized;

e) upon suspension or cancellation of certification, discontinue use of all advertising matter that contains any referencethereto and returnanycertification documents as requiredbytheCertificationDivision;

f) usecertificationonlytoindicatetheproductsarecertifiedasbeinginconformitywith specifiedstandards;

g) endeavor to ensure that no certificate or report nor any part thereof is used in a misleadingmanner;

h) ensurethatanyreferencetoourproductcertificationincommunicationmediasuchas documents, brochures or advertising, complies with the requirements of the CertificationDivision;

19 Chapin Rd., Building D Pine Brook, New Jersey, 07058, United States i) j) keep a record of all complaints made known to the us relating to the products compliance with requirements of the relevant standard and to make these records availabletotheCertificationDivisionwhenrequested;

takeappropriateactionwithrespecttosuchcomplaintsandanydeficienciesfoundin productsorservicesthataffectcompliancewiththerequirementsforcertification;

k) documenttheactionstaken. Thisauthorizationisvaliduntilfurtherwrittennoticefromtheapplicant. SincerelyYours Jenni Chun /GeneralManager Samsung ElectronicsNorth America INC. TEL: +1-973-808-6362 E-mail: j1.chun@samsung.com

WARNING:pdfminer.pdfpage:The PDF <_io.BufferedReader name='/Volumes/Scratch/Incoming/eg-scratch/6468331.pdf'> contains a metadata field indicating that it should not allow text extraction. Ignoring this field and proceeding. Use the check_extractable if you want to raise an error in this case Antenna Information Item Contents Antenna Type PCB Embedded Antenna Antenna peak gain

-6.02 i Manufacturer / Model name Samsung Electronics Co Ltd / -

Address of manufacturer 19 Chapin Rd., Building D, Pine Brook, New Jersey, United States, 07058 Antenna Length Antenna Width 0.4 cm 0.2 cm Length Width PCB Embedded Antenna EJ-PX711 S-Pen BLE Antenna Specification EJ-PX711 S-Pen BLE PCB Embedded Antenna Top Bottom Antenna Antenna VSWR Freqency [MHz]

VSWR 2400 1.70 2440 1.28 2480 1.33 Antenna Gain Frequency [MHz]

Peak Gain [dBi]

Avg. Gain [dB]

2400

-8.96

-13.32 2440

-7.73

-11.98 2480

-6.02

-10.51 T I S Measurement Report Model Name EJ-PX710 Channel T I S Max. NHPIS 60`

UHIS UHIS Ratio 0 Ch. 79.44 84.79 78.24 78.98 64.65%

19 Ch. 81.79 87.29 80.45 81.38 65.42%

Airlink 3D 39 Ch. 81.89 87.47 80.48 81.52 66.13%

T R P Measurement Report Model Name EJ-PX710 Channel T R P Max. NHPRP 60`

UHRP UHRP Ratio 0 Ch.

-13.93

-8.36

-15.08

-14.38 64.83%

19 Ch.

-11.05

-5.71

-12.36

-11.40 66.14%

Airlink 3D 39 Ch.

-9.92

-4.21

-11.33

-10.23 67.23%

SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Declaration Applicant Legal Business Name Samsung Electronics Co., Ltd. Address Grantee Code FCC ID Authorized Contact Name Contact Email Contact Phone 19 Chapin Rd., Building D, Pine Brook, New Jersey, 07058 A3L A3LEJPX710 Jenni Chun j1.chun@samsung.com 973-808-6375 I, the undersigned, certify that I am an authorized signatory for the Applicant and therefore declare;

a) b) c) d) e) in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this application, the Applicant is responsible for:

labeling the equipment with the exact FCC ID as specified in this application,

(1)

(2) compliance statement labeling pursuant to the applicable rules,

(3) compliance of the equipment with the applicable technical rules, if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCCs technical requirements. in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsible party and agree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321. in accordance with ISO 17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements.

(1)

(2)

(3) the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing. the Applicant shall make provisions to always have a production sample available upon request by SGS, FCC and/or ISED. the Applicant shall, upon request by SGS, at the Applicants expense, provide a production sample of the requested product to SGS, FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. f) g) neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.2002(b) for the definition of a party for these purposes. the Applicant has read, understood, accepts and agrees to abide by the SGS North America, Inc.(TCB) terms and conditions. Link to CFRs: https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-regulations-title-47 Link to KDBs: https://apps.fcc.gov/oetcf/kdb/index.cfm Link to RSP-100: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html Link to the Covered List: Covered List Samsung Electronics Co., Ltd. (the applicant) certifies that the equipment for which authorization is sought is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Samsung Electronics Co., Ltd. (the applicant) certifies that, as of the date of the filing of the application, the applicant [is not] identified on the Covered list, established pursuant to 1.50002, as an entity producing covered equipment. Applicant Signature:

Date: 03 April 2023 Print Name:

Jenni Chun Title:

General Manager

*NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database QSF27-14-04 Rev 1.0 Rev. Feb 6, 2023 Page 1 of 1 Original Issue: Jan. 4, 2021

19 Chapin Rd., Building D Pine Brook, New Jersey, 07058, United States 03 April 2023 FederalCommunicationsCommission AuthorizationandEvaluationDivision 7435OaklandMillsRoad, Columbia,MD21046 REQUEST FORCONFIDENTIALITY FCC ID: A3LEJPX710 ToWhomItMayConcern:

PursuanttoSections0.457and0.459oftheCommissionsRules(CFR47),andSection552(b)(4) of the Freedom of Information Act, Samsung Electronics Co., Ltd. hereby requests confidentiality and treatment of certain information accompanying this application. Thematerials contain trade secrets and proprietary information not customarily released to thepublic. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. WearealsoherebyrequestShortTermConfidentialityfor180daysafterthegrantasoutlined in Public Notice DA 041705. This provision will give Samsung Electronics Co., Ltd temporary confidentiality of commercially sensitive information prior to product release. The requested PermanentandTemporaryConfidentialexhibitsarelistedasfollows:

CONFIDENTIALLIST 1 BlockDiagram Permanent 2 OperationalDescriptions ShortTerm 3 4 5 6 Schematics ExternalPhotos InternalPhotos TestSetupPhotos 7 UserManual TheApplicantunderstandsthatpursuanttoRule0.457,disclosureofthisapplicationandall accompanyingdocumentations,whereapplicable,willnotbemadepublicbeforethedateof theGrantforthisapplication. SincerelyYours, Jenni Chun /GeneralManager Samsung ElectronicsNorth America INC. TEL: +1-973-808-6362 E-mail: j1.chun@samsung.com

SAMSUNG ELECTRONICS CO., LTD 129, Samsung-ro,Yeongtong-gu Suwon-si,Gyeonggi-do, 16677, Korea April 4th, 2023 Federal Communications Commission To Whom It May Concern:

SUBJECT : Label Statement FCC ID : A3LEJPX710 We hereby provide the following attestations according to 47 CFR 2.935 and FCC KDB 784748 D02:

This device operates in conjunction with a device that has an electric display and therefore qualifies for e-labling per 47 CFR 2.935 and FCC KDB 784748 D02. The product and associated device are capable of functioning locally and under control of the end-user, per FCC KDB 784748 D02. At the time of purchase, the FCC ID is readily and physically visible to the purchaser on the exterior package per 2.935(d). The FCC ID will be readily legible without the aid of magnification according to 2.935(a). The literature in the package describes how to access the electronic display to find the FCC ID per 2.935(e) and FCC KDB 784748. The user will be able to access this information within a maximum of 3 steps. We, Samsung have programmed the e-label and it is not able to be modified by any third party.The user will be able to access this information without a SIM card, special accessories or supplemental plug-

ins. The FCC ID will be able to survive normal shipping and handling so it is visible for inspection at the time of import. Should you have any questions or comments concerning the above, please contact the undersigned. Sincerely Yours, JENNI, CHUN General Manager Samsung Electronics CO. LTD TEL: +1-973-808-6375 FAX: +1-973-808-6361 E-mail: j1.chun@samsung.com

UNITED STATES DESIGNATED AGENT LETTER Date: 28-MAR-2023 TO:

Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Applicant Company Name: Samsung Electronics Co., Ltd. A3L Jenni Chun 19 Chapin Rd., Building D Grantee Code:

Contact Name:

Address:

City/Province/Zip: Pine Brook/New U.S. designated agent Company Name: Samsung Electronics Co., FRN:

Contact Name:

Address:

City/Province/Zip: Pine Brook/New Ltd. 0005810205 Jenni Chun 19 Chapin Rd., Building D Telephone:

Fax:

Email:

Jersey/07058 973-808-6375 973-808-6361 j1.chun@samsung.com Telephone:

Fax:

Email:

Jersey/07058 973-808-6375 973-808-6361 j1.chun@samsung.com Applicable Equipment: FCC ID: A3LFEJPX710 ATTN: Director of Certification:

We, Samsung Electronics Co., Ltd., understand and acknowledge the applicants consent and the designated agents obligation to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and e-mail of the designated agent listed above. We, Samsung Electronics Co., Ltd., acknowledge the applicants acceptance of its obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. Applicant Name (Printed):

Jenni Chun U.S. designated agent Name (Printed):

Jenni Chun Title: General Manager Signature:

Title: General Manager Signature: