| all | frequencies |
|
exhibits | applications |
|---|---|---|---|---|
| manual |
| app s | submitted / available | |||||||
|---|---|---|---|---|---|---|---|---|
| 1 |
|
Users Manual | Users Manual | 732.33 KiB | August 07 2004 | |||
| 1 | Attestation Statements | August 07 2004 | ||||||
| 1 | RF Exposure Info | August 07 2004 | ||||||
| 1 | External Photos | August 07 2004 | ||||||
| 1 | ID Label/Location Info | August 07 2004 | ||||||
| 1 | Internal Photos | August 07 2004 | ||||||
| 1 | RF Exposure Info | August 07 2004 | ||||||
| 1 | RF Exposure Info | August 07 2004 | ||||||
| 1 | RF Exposure Info | August 07 2004 | ||||||
| 1 | RF Exposure Info | August 07 2004 | ||||||
| 1 | Test Report | August 07 2004 | ||||||
| 1 | Test Setup Photos | August 07 2004 |
| 1 | Users Manual | Users Manual | 732.33 KiB | August 07 2004 |
DUAL BAND GPRS Series SGH-C225 Portable Digital Telephone User Manual Please read this manual before operating your phone, and keep it for future reference. Intellectual Property All Intellectual Property, as defined below, owned by or which is otherwise the property of Samsung or its respective suppliers relating to the SAMSUNG Phone, including but not limited to, accessories, parts, or software relating thereto (the Phone System), is proprietary to Samsung and protected under federal laws, state laws, and international treaty provisions. Intellectual Property includes, but is not limited to, inventions
(patentable or unpatentable), patents, trade secrets, copyrights, software, computer programs, and related documentation and other works of authorship. You may not infringe or otherwise violate the rights secured by the Intellectual Property. Moreover, you agree that you will not (and will not attempt to) modify, prepare derivative works of, reverse engineer, decompile, disassemble, or otherwise attempt to create source code from the software. No title to or ownership in the Intellectual Property is transferred to you. All applicable rights of the Intellectual Property shall remain with SAMSUNG and its suppliers. Printed in Korea Code No.: GH68-0XXXXA English.05/2004. Rev. 1.0 Samsung Telecommunications America, L. P. U. S. Headquarters:
1301 East Lookout Drive Richardson, Texas 75082 Tel: 972-761-7000 Fax: 972-761-7001 Customer Care Center:
1601 E. Plano Parkway Suite 150 Plano, TX 75047 Tel: 888-987-HELP (4357) Fax: 972-761-7501 Internet Address: http://www.samsungusa.com/
wireless 2003 Samsung Telecommunications America. All rights reserved. No reproduction in whole or in part allowed without prior written approval. Samsung is a registered trademark of Samsung Electronics America, Inc. and its related entities. Table of Contents Important Safety Precautions ..................... 7 Road Safety at All Times ...................................... 7 Switching Off When Refueling ............................... 7 Switching Off in Aircraft ....................................... 7 Switching Off in Hospitals..................................... 7 Interference ....................................................... 7 Special Regulations ............................................. 8 Radio Frequency Exposure ................................... 8 Sensible Use....................................................... 8 Accessories and Batteries..................................... 8 Qualified service ................................................. 8 Unpacking.......................................................... 9 Your Phone ............................................... 10 Phone Layout ................................................... 10 Display ...................................................... 13 Display Layout.................................................. 13 Getting Started.......................................... 16 Installing the SIM Card ...................................... 16 Charging a Battery ............................................ 18 Switching the Phone On/Off................................ 20 Locking or Unlocking the keypad ......................... 21 Call Functions............................................ 23 Making a Call.................................................... 23 Adjusting the Volume ........................................ 25 Answering a Call ............................................... 25 Viewing Missed Calls.......................................... 26 To view the missed call immediately .................... 26 Switching Quickly to the Silent Mode ................... 28 Selecting Functions and Options ............... 29 Example: Setting the Display Language ............... 30 Phonebook ................................................ 31 Storing a Number with a Name ........................... 31 Using Phonebook Entry Options........................... 33 Searching for and Dialing a Number in the Phonebook 34 Editing a Caller Group........................................ 36 Speed-Dialing................................................... 37 Deleting All Phonebook Entries............................ 38 Checking Memory Status.................................... 39 Entering Text ............................................ 40 Changing the Text Input Mode ............................ 40 Using the T9 Mode ............................................ 41 Using the Upper/Lower-Case Character Mode........ 42 Using the Symbol Mode ..................................... 43 Using the Number Mode..................................... 43 In-Call Options .......................................... 45 Putting a Call on Hold ........................................ 45 Switching the Microphone Off (Mute) ................... 46 Muting/Sending DTMF........................................ 46 Searching for a Number in the Phonebook ............ 47 Answering a Second Call .................................... 47 Making a Multiparty Call..................................... 48 Using the Menus........................................ 50 Accessing Menu Functions by Scrolling ................. 50 Accessing Menu Functions by Using Shortcuts ....... 51 List of Menu Functions ....................................... 52 Text Messages........................................... 58 Create ............................................................. 59 Templates........................................................ 62 Settings........................................................... 62 Delete all ......................................................... 63 Memory status.................................................. 63 Voice mail ........................................................ 64 Broadcast ........................................................ 64 Picture messages ...................................... 66 Inbox .............................................................. 66 Outbox ............................................................ 68 Draft ............................................................... 69 Create ............................................................. 69 Templates........................................................ 72 Delete all ......................................................... 72 Memory status.................................................. 73 Call records ............................................... 74 Missed calls...................................................... 74 Incoming calls .................................................. 74 Outgoing calls................................................... 74 Delete all ......................................................... 75 Call time .......................................................... 75 Call cost .......................................................... 76 Sound settings .......................................... 77 Ring tone ......................................................... 77 Ring volume ..................................................... 77 Alert type......................................................... 78 Keypad tone..................................................... 78 Message tone ................................................... 78 Power On/Off.................................................... 80 Extra tones ...................................................... 80 Phone settings .......................................... 81 Display settings ................................................ 81 Greeting message ............................................. 84 Own number .................................................... 84 Language......................................................... 84 Security........................................................... 85 Extra settings ................................................... 88 Short cut ......................................................... 89 Reset settings................................................... 89 Organizer .................................................. 90 Alarm .............................................................. 90 Calendar .......................................................... 91 Time & date ..................................................... 93 Calculator ........................................................ 94 To do list ......................................................... 95 Voice memo ..................................................... 97 Currency exchange............................................ 98 Network services ...................................... 99 Call forwarding ................................................. 99 Call waiting .................................................... 101 Network selection............................................ 102 Caller ID ........................................................ 102 Funbox .................................................... 103 t-zones .......................................................... 103 Games........................................................... 104 Sounds .......................................................... 105 Images.......................................................... 105 Delete all ....................................................... 105 Memory status................................................ 105 Solving Problems .................................... 106 Access Codes........................................... 109 Phone Password.............................................. 109 PIN ............................................................... 110 PUK............................................................... 110 PIN2 ............................................................. 111 PUK2............................................................. 111 WAP Browser .......................................... 112 About the WAP Browser ................................... 112 Using the WAP Browser.................................... 115 Health and Safety Information ................ 119 Usage guidelines:
All about performance and safety ...................... 119 Maintaining Safe Use of and Access to Your Phone 121 Caring for the Battery...................................... 124 Acknowledging Special Precautions and FCC ....... 125 FDA Consumer Update..................................... 126 CTIA Safety Information .................................. 135 Owner's Record .............................................. 139 User Guide Proprietary Notice ........................... 139 STANDARD LIMITED WARRANTY............. 140 Glossary .................................................. 145 Index ...................................................... 149 Important Safety Precautions Read these guidelines before using your wireless phone. Failure to comply with them may be dangerous or illegal. For more detailed safety information, see Health and Safety Information on page 119. Road Safety at All Times Do not use a hand-held phone while driving; park the vehicle first. Switching Off When Refueling Do not use the phone at a service station or near fuels or chemicals. Switching Off in Aircraft Wireless phones can cause interference. Using them in aircraft is both illegal and dangerous. Switching Off in Hospitals Switch off your phone near medical equipment. Follow any regulations or rules in force. Interference All wireless phones may be subject to interference, which could affect their performance. Important Safety Precautions 7 Special Regulations Meet any special regulations in force in any area and always switch off your phone whenever it is forbidden to use it, or when it may cause interference or danger (in a hospital for example). Radio Frequency Exposure The design of this phone complies with FCC (of the U.S. government) requirements relating to radio frequency (RF) exposure. To maintain compliance with these requirements, use only Samsung-supplied or approved accessories. Use of non-
approved accessories may violate the requirements. Sensible Use Use only in the normal position (held to the ear). Avoid unnecessary contact with the antenna when the phone is switched on. Accessories and Batteries Use only Samsung-approved accessories and batteries. Qualified service Only qualified service personnel may install or repair your phone. Unpacking Your package contains the following items. Handset Travel Adapter Battery Users manual Ear Microphone In addition, you can obtain the following accessories for your phone from your local Samsung dealer:
Battery charger Earphone Simple hands-free kit Car holder Standard battery Cigarette lighter adapter Important Safety Precautions 8 Important Safety Precautions 9 Your Phone Phone Layout The following illustrations show the main elements of your phone. Earpiece Ear-microphone jack (on side) Volume/Menu browse keys
(on side) Softkey/Left Dial/Menu Confirmation key Cancel/
correction key Microphone Display Navigation keys Softkey/Right Power on/off/
Menu exit key Alphanumeric keys Special function keys Key Description In the Menu Mode, scroll through the menu options and phonebook memory. In idle mode, allow you to access your favorite menu options directly (for more information on shortcuts, see page 89). In the menu facility, return to the previous menu level and select the current menu respectively. When entering text, move the cursor left and right respectively. In idle mode, allow you to access your favorite menu options directly (for more information on shortcuts, see page 89). Perform the functions indicated by the text above them (on the bottom line of the display). In idle mode, launches the WAP Browser directly. Deletes characters from the display. In the menu facility, returns to the previous menu level.
(soft keys) Your Phone 10 Your Phone 11 Key Description (Continued) Makes or answers a call. When held down in idle mode, recalls the last numbers dialed or received. In the menu facility, selects a menu function or stores information that you have entered (such as a name) in the phone or SIM memory. Ends a call. Also switches the phone on and off when held down. In the menu facility, returns to the idle mode and cancels your input. When held down in idle mode, accesses your voice mail. Enter numbers, letters and some special characters. The key with the * key is used to change from upper to lower case when entering text. The key with the # key is used to enter a space, or to turn on the silent/vibration function.
(on the side of the phone) During a call, adjust the earpiece volume. In idle mode, adjust the key volume. In the menu facility, scroll through the menu options and phone book memory. Display Display Layout The display is comprised of three areas. Icons Text and graphic area Menu Ph.Book Soft key indications Area First line Middle lines Last line Description Displays various icons (see page 14). Display messages, instructions and any information that you enter (number to be dialed, for example). Shows the functions currently assigned to the two soft keys. Your Phone 12 Display 13 Backlight The display is illuminated by a backlight. When you press any key, the backlight illuminates. It turns off if no key is pressed within a given period of time, depending on the Back Light menu option. To specify the length of time for which the backlight is active, set the Back Light menu option (Menu 5.1.5); see page 83 for further details. Main Screen Display Your phone has a main screen display. It indicates that you have an incoming call or a message, and notifies you at the specified time when you set an alarm. Icons Icon Description Shows the received signal strength. The greater the number of bars, the better the signal strength. Appears when a call is in progress. Appears when you are connected to the GPRS network. Appears when the Silent mode is active or you set the Alert Type menu option (Alert type on page 78), so that the phone vibrates when you receive a call; for further details, see page 78. Appears when a new text message has been received. Appears when a new voice mail message has been received. Appears when you are entering text to indicate the current text input mode. Appears when you set the alarm. Shows the level of your battery. The more bars you see, the more power you have left. Appears when the Mute mode is active. Display 14 Display 15 Getting Started Installing the SIM Card When you subscribe to a cellular network, you are provided with a plug-in SIM card loaded with your subscription details, such as your PIN, any optional services available and so on. Note: The plug-in SIM card and its contacts can be easily damaged by scratches or bending, so be careful when handling, inserting or removing the card. Keep all SIM cards out of the reach of small children. 1. If necessary, switch off the phone by holding down the key until the power-off image is displayed. 2. Remove the battery. To do so:
Press down the catch above the battery and hold it in this position. Slide the battery and lift it away, as shown. 3. Slide the SIM card into the SIM card holder so that the holder locks the card in position. Make sure that the cut corner is top right and the gold contacts of the card face into the phone. Note: When you need to remove the SIM card, slide it, as shown, and take it out of the holder. 4. Place the battery back, taking care to match the tabs on the battery with the grooves on the phone. Getting Started 16 Getting Started 17 5. Slide the battery towards the top of the phone until it clicks into place. Make sure that the battery is properly installed before switching on the power. 1. With the battery in position on the phone, connect the lead from the travel adapter to the bottom of the phone. Charging a Battery Your phone is powered by a rechargeable Li-ion battery. A travel adapter is provided with your phone. Use only approved batteries and chargers. Ask your local Samsung dealer for further details. The phone can be used while the battery is charging, but this will cause the phone to charge more slowly. Note: You must fully charge the battery before using your phone for the first time. A discharged battery is fully recharged in approximately 200 minutes. 2. Connect the adapter to a standard AC wall outlet. 3. When charging is finished, disconnect the adapter from the power outlet and from the phone by pressing the grey tabs on both sides of the connector and pulling the connector out. Getting Started 18 Getting Started 19 Low Battery Indicator When the battery is weak and only a few minutes of talk time remain, you will hear a warning tone and a message will be repeated at regular intervals on the display:
**Warning**
Low Battery Menu Name When the battery becomes too weak for the phone to operate, it switches off automatically. Switching the Phone On/Off 1. Hold down the key until the phone switches on. 2. If the phone asks for a password, key in the password and press the OK soft key. The phone password is factory set to 00000000. For further details, see page 109. 3. If the phone asks for a PIN, key in the PIN and press the OK soft key. For further details, see page 110. The phone searches for your network and when it finds it, the idle screen appears with the Service Providers name, date and time. Now, you can make or receive a call. Note: The display language is factory set to English. To change the language, use the Language menu option (Menu 5.4); for further details, refer to page 84. If you locked the keypad, you must unlock it before switching the phone off by pressing the Unlock soft key and the key. 4. When you wish to switch the phone off, hold down the key until the power-off image is displayed. Note: If you locked the keypad, you must unlock it before switching the phone off by pressing the Unlock soft key and the key. Locking or Unlocking the keypad You can lock the keypad to avoid pressing keys by mistake. In Idle Mode, press and hold the and Keypad Locked appear on the display. You can answer incoming calls using any keys, even if you lock the keypad. When you receive a call in the key lock mode, the keypad is automaticlly unlocked. After the call, the key lock mode is canceled. You can dial emergency calls even if you lock the keypad. When the confirming message appears, select Yes by pressing key until the LOCK icon Getting Started 20 Getting Started 21 the left soft key or the Green phone key. When you end the call, your phone returns to the key lock mode after the period of time specified in the Phone Lock menu option. To exit the key lock mode, press the UnLock soft key and then press the key again. Keypad Unlocked appears and the Lock icon no longer displays. Call Functions Making a Call When the idle screen is displayed, key in the area code and phone number, and press the key. Note: If you have checked the Auto Redial option in the Extra Settings menu (Menu 5.6.1), the number is redialed automatically up to ten times when the person does not answer the call or is already on the phone; see page 88 for further details. Making a International Call 1. Press and hold down the 0 key. The + character appears. 2. Key in the country code, area code and phone number and press the key. Correcting the Number To clear... Then... The last digit displayed Any other digit in the number Press the key. or key until the cursor is Press the immediately to the right of the digit to be cleared. Press the key. You can also insert a missing digit simply by pressing the appropriate key. The whole display Hold down the second. key for more than one Getting Started 22 Call Functions 23 Ending a Call When you have finished your call, briefly press the key. Redialing the Last Number The phone stores the numbers you dialed, received or missed.To recall any of these numbers, proceed as follows. 1. If you have typed any characters on the display, clear the key for more than one display by holding down the second. 2. Press the key to display a list of the last numbers in the order in which the calls were made. 3. Use the and keys to scroll through the numbers until the required number is highlighted. 4. To... Dial the number highlighted Edit the number highlighted Then... Press the key. Press the Options soft key select Edit option and change the number as required. Making a Call from the Phonebook You can store frequently-dialed phone numbers with a name in the SIM card or the phone memory, using the phonebook. You then simply select the required name to recall the associated number. For further details on the Phonebook features, refer to page 31. Adjusting the Volume During a call, if you want to adjust the earpiece volume, use the keys on the left side of the phone. Press the key to increase and the In idle mode, you can adjust the key volume using the key to decrease the volume. and keys. Answering a Call When somebody calls you, the phone rings and the following screen appears on each display. If the caller can be identified, the callers phone number or name, if stored in your phonebook, is displayed. 1. Press the key or the Accept soft key to answer the incoming call. 2. If the Anykey Answer option in the Extra Settings menu
(Menu 5.6.2) is checked, you can press any key to answer key and the Reject soft key (see a call except for the page 88). 3. End the call by pressing the key. Note: You can answer a call while using the phonebook or menu features. Call Functions 24 Call Functions 25 Viewing Missed Calls If you are unable to answer a call for any reason, you can find out who was calling you, provided that this service is available. This option provides the ability to call the person back, if necessary. The number of missed calls is displayed on the idle screen immediately after a call was missed. To view the missed call immediately 1. Press the View soft key. 2. The number corresponding to the most recent missed call is displayed, if available. To.... Scroll through the missed calls Then press the... or key. Call the number displayed key. Edit or delete a missed call number Select soft key (see the next page). Editing a Missed Call Number Note: If the number corresponding to the missed call is not available, the Edit Number option is not displayed. 1. Press the Options soft key. 2. Press the or key to highlight the Edit option. 3. Press the Select soft key. 4. Change the number as required. Press the Save soft key. If no change is required press the Exit soft key. To... Then press the... Call the number key. Store the number Save soft key and enter the name and location required (for further details, refer to page 31). Deleting a Missed Call 1. Press the Options soft key. 2. If necessary, press the or key to highlight the Delete option. 3. Press the Select soft key to go to the Options menu. You can press the Call feature. key at any time to exit the Missed Note: You can access the Missed Call feature at any time by selecting the Missed Calls menu option (Menu 3.1); for further details, see page 74. Call Functions 26 Call Functions 27 Switching Quickly to the Silent Mode The Silent Mode is convenient when discretion is required and you a wish to stop the phone from making any noise, in a theater for example. In idle mode, to switch your phone quickly to the silent mode, simply press and hold down the key until the Silent Mode message and vibration icon In the silent mode, your phone changes the sound settings as follows. are displayed. Option New Setting Alert Type (Menu 4.3) Vibration Keypad Tone (Menu 4.4) Off SMS Tone (Menu 4.5) Vibration Power On/Off (Menu 4.6) Extra Tones (Menu 4.7.1) Off Off To exit the silent mode and reactivate the previous Sound Settings, press and hold the Mode appears. The vibration icon (
key again until Exit Silent
) is no longer displayed. Selecting Functions and Options Your phone offers a set of functions that allow you to customize your phone. These functions are arranged in menus and sub-
menus, accessed via the two soft keys marked Each menu and sub-menu allows you to view and alter the settings of a particular function. The roles of the soft keys vary according to the current context;
the label on the bottom line of the display just above each key indicates its current role. To view the various functions/options available and select the one required, proceed as follows. 1. Press the appropriate soft key. and
. To... Then press the... Select the:
Function displayed or Option highlighted Select soft key or the key. View the next function or highlight the next option in a list key or key on the left side of the phone. Move back to the previous function or option in a list key or key on the left side of the phone. Move back up one level in the structure Exit the structure without changing the settings key, soft key or key. key. In some functions, you may be asked for a password or PIN. Enter the required code and press the OK soft key. Call Functions 28 Selecting Functions and Options 29 Example: Setting the Display Language 1. When the idle screen is displayed, press the Menu soft key to access the menus. 2. Scroll through the menus until you reach the Phone Settings menu, by pressing the or key. 3. To select the Phone Settings menu, press the Select soft key or the key. Note: If the menu name is too long for the display, will scroll when highlighted. 4. Scroll through the sub-menus until you reach the Language sub-menu, by pressing the or key. 5. To view the languages available, press the Select soft key or the key. The current setting is highlighted. 6. Scroll through the list of languages until the appropriate one is highlighted, by pressing the or key. 7. Press the Select soft key or the key to confirm your selection. 8. Press the or key twice to exit the menu structure. Phonebook You can store phone numbers and their corresponding names in the memory of your SIM card. In addition, you can store up to 1000 numbers in the phone memory. The SIM card and phone memories, although physically separate, are used as if they were a single entity, called the phonebook. Storing a Number with a Name There are two ways to store a number:
Using the Save soft key in idle mode Using the New Entry option in the Phonebook menu Storing a Number in Idle mode As soon as you start to enter a number, Save appears above the left soft key to allow you to store the number in the phonebook. 1. Key in the number to be stored. Note: If you make a mistake while entering a number, correct it using the key. For further details, refer to page 23. 2. When you are sure that it is correct, press the Save soft key. 3. Select an entry type to identify the category of number to be stored. Four categories are available:
Mobile Number Work Number Home Number 4. To select the category, press the or key, followed by the Select soft key. 5. Enter a name and press the OK soft key. Selecting Functions and Options 30 Phonebook 31 The maximum length of a name depends on your SIM card. For information on how to enter characters, see page 40. The phone now displays the first free location in the last memory used to save a number and name. If that memory is full, the first free location in the other memory is displayed. Note: If you change phones, any numbers stored in your SIM card memory will automatically be available with the new phone, whereas any numbers stored in the phone memory must be restored. 6. Press the right soft key, labeled To Card or To Phone to toggle between the phone and card memories. 7. If you do not want to save the number and name in the suggested location, press the number and enter your preferred location by pressing the number keys. key to clear the location 8. Press the OK soft key to store the name and number. 9. After storing, the phone displays the phonebook entry or name just created. To... Then press the... Use the entry options Options soft key. Return to the idle screen key. Storing a Number Using the Phonebook Menu 1. When the idle screen is displayed, press the Ph.Book soft key. 2. Scroll to New Entry by pressing the 2 or key and press the Select soft key. 3. Select an Entry Type to identify the category of the number to be stored. The following four options are provided:
Mobile Number Work Number Home Number E-mail Address Note: The E-mail icon is available in this step. It allows you to save an E-
mail address instead of a phone number. 4. Continue the procedure from Step 4 on page 31 to store the number. Using Phonebook Entry Options While accessing any phonebook entry, press the Options soft key to access the options for the entry. To... Then press the... Select the highlighted option Select soft key or the key. Highlight a different option or key until the required option is highlighted. The following options are available. Paste: allows you to paste the selected number into the normal dialing mode. Use this option to dial a number similar to one in the phonebook, a different extension in the same office, for example.Use the the number as required; refer to page 23 for further details. When you are ready to dial, press the key to change key. Edit: allows you to edit One Entry or All Entry. Select the name and number and press the Select soft key. Delete: allows you to erase the selected name and number from the phonebook. You are asked to confirm that Phonebook 32 Phonebook 33 you wish to erase the name and number by pressing the Yes soft key. Copy: allows you to copy the selected number to another location. Use this option to store a number similar to one already in memory; once copied, edit the number and store it in the phonebook. Caller Group: allows you to assign the entry to a caller group so that the phone alerts you in a particular way when the corresponding person calls you. Select one of the ten groups available. To remove an entry from a group, select the No Group option. For more information on how to change caller group properties, see page 36. Add Entry: allows you to add a new number in a different category (mobile, office, home or E-mail) to the currently selected name. A phonebook entry or name can contain up to four numbers, one in each category. Searching for and Dialing a Number in the Phonebook After storing numbers in the phonebook, you can search for them in two ways: by name and by caller group. Searching for a Number by Name 1. When the idle screen is displayed, press the Ph.Book soft key. When Search is highlighted, press the Select soft key. You are asked to enter a name. 2. Enter the start of the name that you wish to find. 3. The phonebook entries are listed, starting with the first entry matching your input. This entry is also highlighted. To... View the highlighted entry Then press the... View soft key. Select a different entry or key until the required entry is highlighted. Look for a name starting with a different letter To clear previously entered text, press the Key labeled with the required letter. 4. Once you have found the required entry, press the key to dial the number, or press the Options soft key to access the phonebook entry options; for further details, see page 33. Searching for a Number by Caller Group 1. When the idle screen is displayed, select the Ph.Book soft key key to scroll to Group Search by pressing the and press the Select soft key. You are asked to enter a group name. or 2. Enter the start of the group name that you wish to find. Phonebook 34 Phonebook 35 3. The caller groups are listed, starting with the first group matching your input. The group is also highlighted. 4. Scroll to the required group by pressing the or key and press the View soft key. 5. The phonebook entries in the selected caller group are listed. To... View the highlighted entry Select a different entry Then press the... View soft key. or entry is highlighted. key until the required 6. Once you have found the required entry, press the key to dial the number, or press the Options soft key to access the phonebook entry options; for further details, see page 33. Editing a Caller Group 1. When the idle screen is displayed, select the Ph.Book soft key and key to scroll to Group Edit by pressing the 4 or press the Select soft key. 2. Enter the start of the required group name or scroll through the group list by pressing the or key. 3. When the required group is highlighted, press the Options soft key. 4. Select each option and change the settings, as required. The following options are available. Call ring tone: allows you to select the ring tone to be used when you receive a voice call from a person in the group. Phonebook 36 SMS tone: allows you to select the ring tone to be used when you receive a text message from a person in the group. Graphic: allows you to select the graphic icon to be displayed when you receive a voice call from a person in the group. Group Name: allows you to assign a name to the group;
for further details on how to enter characters, see page 40. 5. When you have finished, press the or key. Speed-Dialing Once you have stored phone numbers in the SIM card, you can set up to eight speed-dial entries and then dial them easily whenever you want, simply by pressing the associated number key. Setting Up Speed-Dial Entries 1. When the idle screen is displayed, select the Ph.Book soft key and key to scroll to Speed Dial by pressing the 5 or press the Select soft key. 2. Select the key to which you wish to assign the speed-dialing feature (keys 2 to 9) and press the OK soft key. Note: If you have already assigned a number to the key, the Options soft key replaces the OK soft key. Go to Step 6. 3. Select the required phonebook entry from the list and press the View soft key. Phonebook 37 4. Select the required number if the entry has more than one key and press the Select or number, by pressing the soft key. 5. Once you have assigned a number to the selected key, four options are available:
Change: allows you to assign a different number to the key. Delete: allows you to clear the setting so that no number is assigned to the key. Delete All: allows you to clear the settings for all keys so that no numbers are assigned to any of the keys. Number: allows you to view the number assigned to the key. 6. When you have finished, press the or key. Speed-Dialing from the Phonebook To speed-dial the numbers assigned to keys 2 to 9, press and hold down the appropriate key. Note: Memory location 1 is reserved for your Voice Mail server number and cannot be changed. Deleting All Phonebook Entries You can delete all of the entries in the selected memory or both memories. 1. When the idle screen displays, press the Ph.Book soft key. 2. Scroll to Delete All by pressing the Up or Down key and press the Select soft key. 3. To place a check mark on the memory you want to empty, ALL, SIM or Phone, press the Mark soft key. You can remove the check mark by pressing the Unmark soft key. Phonebook 38 4. When you are finished marking, press the Delete soft key to delete the entries in the selected memory. 5. Enter the phone password and press the OK soft key. Note: The password is preset to 00000000 at the factory. 6. When the confirming message appears, press the Yes soft key. 7. When you finish deleting, press the or the key. Checking Memory Status You can check how many names and numbers are stored in the phonebook (card and phone memories) or how many free locations remain. 1. When the idle screen is displayed, select the Ph.Book soft key to scroll to Memory Status option pressing the 7 or key and press the Select soft key. 2. When the idle screen is displayed, select the 3. Press the or keys to view the number of existing and remaining entries in the card and phone memories. Phonebook 39 Entering Text When using your phone, you will often need to enter text. For example, when storing a name in the phonebook, creating your personal greeting or scheduling events in your calendar. You can enter alphanumeric characters by using your phones keypad. You are provided with the following text input modes. T9 mode: This mode allows you to enter words with only one keystroke per letter. Each key on the keypad has more than one letter when you press the 5 key once, J, K or L may be displayed. The T9 mode automatically compares your keystrokes with an internal linguistic dictionary to determine the correct word, thus requiring far fewer keystrokes than the traditional upper/lower-case character modes. Upper/lower-case character modes: These modes allow you to enter letters by pressing the key labeledlabeled with the required letter once, twice, three or four times until the letter is displayed. Number mode: This mode allows you to enter numbers. Symbol mode: This mode allows you to enter symbols, such as punction marks. Changing the Text Input Mode When you are in a field that allows characters to be entered, you will notice the text input mode indicator in the display. To select the... Then press the soft key until... T9 mode displays. See page 41. To select the... Then press the soft key until... Alphabet mode abc displays. See page 42. Symbol mode Number mode The symbol list displays. See page 43. 1 is displayed. See page 43. Using the T9 Mode The T9 predictive text input mode allows you to key in any character using single keystrokes. This text input mode is based on a built-in dictionary. 1. When you are in the T9 predictive text input mode, start entering a word by pressing keys 2 to 9. Press each key only once for one letter. Example:to enter HELLO in the T9 mode, press 4, 3, 5, 5 and 6. The word that you are typing appears in the display. It may change with each key that you press. 2. Enter the whole word before editing or deleting the keystrokes. 3. If the word is correct, start entering the next word. 4. Otherwise, press the 0, key repeatedly to display alternate word choices for the keys that you have pressed. or Example:both OF and ME have the sequence 6 and 3. The phone displays the most commonly used choice first. 5. Complete each word with a space by pressing the # key. To type words not found in the T9 mode, change the text input mode to the upper/lower-case character input mode. To enter full stops, hyphens or apostrophes, press the 1 key. The T9 mode applies grammar rules to ensure that the correct punctuation is used. Entering Text 40 Entering Text 41 Refer to the table below for more information about the characters available. Key Characters in the Order Displayed Upper Case Upper Case Lower Case Space To change the case in the T9 mode, use the * key. You can move the cursor by using the keys. To key. Press and hold down and delete letters, press the the key to clear the display. Using the Upper/Lower-Case Character Mode Use the 1 to 0 keys to enter your text. 1. Press the key labeled with the required letter:
Once for the first letter Twice for the second letter, and so on 2. Select the other letters in the same way. Note: The cursor moves to the right when you press a different key. When entering the same letter twice or a different letter on the same key, just wait for a few seconds for the cursor to move right automatically, and then select the next letter. To insert a space, press the # key. You can move the cursor by using the delete letters, press the the key to clear the display. keys. To key. Press and hold down and Using the Symbol Mode The symbol mode enables you to insert symbols in a text message. Use the navigation keys to scroll to the desired symbol and then press OK soft key to insert the highlighted symbol into your message. Using the Number Mode The Number mode enables you to enter numbers in a text message (a telephone number for example). Press the keys Entering Text 43 Entering Text 42 corresponding to the required digits before manually switching back to the appropriate text input mode. Entering Text 44 In-Call Options Your phone provides a number of control functions that you can use during a call. Putting a Call on Hold You can place the current call on hold whenever you want. You can make another call while you have a call in progress if this service is supported by the network. Of these two calls, one is active and the other is on hold and you can switch between the calls. To place a call on hold, simply press the Hold soft key. You can reactivate the call whenever you want, by pressing the Unhold soft key. To make a call while you have a call in progress, proceed as follows. 1. Key in the phone number that you wish to dial or look it up in the phonebook. 2. Press the key to dial the second call. 3. The first call is automatically put on hold. Or alternatively, proceed as follows. 1. Put the current call on hold by pressing the Hold soft key. 2. Make the second call in the normal way. To swap between the two calls, simply press the Swap soft key. The current call is placed on hold and the call on hold is reactivated so that you can continue conversing with the other party. When you have finished, end each call normally by pressing the key. In-Call Options 45 Switching the Microphone Off (Mute) You can temporarily switch your phones microphone off, so that the other party cannot hear you. Example: You wish to say something to another person in the room but do not want the other party to hear you. To switch the microphone off temporarily, proceed as follows. 1. Press the Options soft key. 2. If necessary, press the key to highlight the Mute option. 3. Press the OK soft key. The other party can no longer hear you. To switch the microphone back on, proceed as follows. 1. Press the Options soft key. 2. If necessary, press the key to highlight the Unmute option. 3. Press the OK soft key. The other party can hear you again. Muting/Sending DTMF These options allow you to turn the key tones off or on. If the Mute keys option is selected, your phone does not transmit the key tones. It allows you to press keys without hearing annoying key tones during a call. Note: To communicate with answering machines or computerized telephony systems, the Send keys option must be selected. Searching for a Number in the Phonebook You can search for a number in the phonebook during a call. 1. Press the Options soft key. 2. Press the key to highlight the Phonebook option. 3. Press the OK soft key. The phonebook entries are listed. 4. Enter the name that you wish to find. If you enter the start of the name, the phonebook entries are listed, starting with the first entry matching your input. The entry is also highlighted. 5. To view the highlighted entry, press the Options soft key. For a more detailed description of the Phonebook feature, refer to page 31. Answering a Second Call You can answer an incoming call while you have a call in progress, if this service is supported by the network and you have set the Call Waiting menu option (Menu 7.2) to Activate (see page 101). You will be notified of an incoming call by a call waiting tone. To answer a call while you have a call in progress, proceed as follows. 1. Press the key to answer the incoming call. The first call is automatically put on hold. 2. To switch between the two calls, press the Swap soft key. To end a held call, press the Options soft key and select the End Held Call option. 3. To end the current call, press the key. In-Call Options 46 In-Call Options 47 Making a Multiparty Call A multiparty call is a network service that allows up to six people to take part simultaneously in a multiparty or conference call. For more information, contact your service provider. Setting up the Multiparty Call 1. Call the first participant in the normal way. 2. Call the second participant in the normal way. The first call is automatically put on hold. 3. To join the first participant to the multiparty call, press the Options soft key and select the Join option. 4. To add a new person to the multiparty call, call the person in the normal way, then press the Options soft key and select the Join option. You can add incoming callers by answering the call and pressing Options, followed by Join. Repeat as required. Having a Private Conversation With One Participant 1. Press the Options soft key and choose the Select one option. The list of call participants appears. 2. Highlight the required person, by pressing the key. followed by the Select soft key or the or key, 3. Select the Private option. Now you can talk privately with that person. The other participants can continue to converse with each other. 4. To return to the multiparty call, press the Options soft key and select Join. All the multiparty call participants can now hear each other. In-Call Options 48 Dropping One Participant 1. Press the Options soft key and choose the Select one option. The list of call participants appears. 2. Highlight the required person, by pressing the key. followed by the Select soft key or the or key, 3. Select Remove. The call is ended with that participant, but you can continue to talk with the other participants. 4. End the multiparty call by closing the phone or pressing the key. In-Call Options 49 Accessing Menu Functions by Using Shortcuts The menu items (menu, sub-menus and options) are numbered and can be accessed quickly by using their shortcut numbers. The shortcut number is shown in the bottom right next to the soft key on the display. Simply press the Menu soft key and key in the required number. Example: Accessing the Language option. 1. Press the Menu soft key. 2. Press 5 for Phone Settings. 3. Press 4 for Language. The languages available are displayed directly. Note: The numbers assigned to each menu option are indicated in the list on page 52. They may not match the menu number on the phone. It depends on the services supported by the SIM card. Using the Menus The phone offers a range of functions that allow you to tailor the phone to your needs. These functions are arranged in menus and sub-menus. The menus and sub-menus can be accessed by scrolling with the navigation keys or by using the shortcuts. Accessing Menu Functions by Scrolling 1. In idle mode, press the Menu soft key to access the menu facility. 2. Scroll with the or key to reach the required main menu, Phone Settings for example. Press the Select soft key or the key to enter the menu. 3. If the menu contains any sub-menus, Language for example, you can access them by scrolling with the key and pressing the Select soft key. or If the menu that you have selected contains further options, repeat the same procedure. To... Then press the... Scroll through the menus or key or use the Volume keys on the left side of the phone. Confirm the chosen setting Select soft key or the key. Return to the previous menu level Exit the menu without changing the settings soft key. key. Using the Menus 50 Using the Menus 51 List of Menu Functions The following illustration shows the menu structure available and indicates the:
Number assigned to each option Page on which you can find a description of each feature Note: If you use a SIM AT card that provides additional services, the SIM AT menu (x) is displayed first when you press the Menu soft key to enter the menu facility. For further details, refer to your SIM card documentation. 1. Text messages (see page 58) 1.1 Inbox 1.2 Outbox 1.3 Create 1.4 Templates 1.5 Settings 1.5.1 Setting 1*
1.5.2 Common setting*
1.6 Delete all 1.7 Memory status 1.7.1 SIM memory 1.7.2 PHONE memory 1.7.3 CB memory 1.8 Voice mail 1.8.1 Call voice mail 1.8.2 Voice server number 1.9 Broadcast (If supported) 1.9.1 Read 1.9.2 Receive 1.9.3 Channel List 1.9.4 Language 2. Picture messages (see page 66) 2.1 Inbox 2.2 Outbox 2.3 Draft 2.4 Create 2.5 Templates 2.6 Delete all 2.7 Memory status 3. Call records (see page 74) 3.1 Missed calls 3.2 Incoming calls 3.3 Outgoing calls 3.4 Delete all 3.5 Call time 3.5.1 Last call 3.5.2 Total outgoing 3.5.3 Total incoming 3.5.4 Reset timers 3.6 Call cost 3.6.1 Last call cost 3.6.2 Total cost 3.6.3 Max cost 3.6.4 Reset counters 3.6.5 Set max cost 3.6.6 Price/Unit
* Shown only if supported by your SIM card. Using the Menus 52 Using the Menus 53 4. Sound settings (see page 77) 4.1 Ring tone 4.2 Ring volume 4.3 Alert type 4.4 Keypad Tone 4.5 Message tone 4.5.1 SMS tone 4.5.2 SMS-CB tone 4.5.3 MMS tone 4.6 Power On/Off 4.6.1 Off 4.6.2 Classical 4.6.3 Cheerful 4.7 Extra tones 4.7.1 Error tone 4.7.2 Minute minder 4.7.3 Connect tone 5. Phone settings (see page 81) 5.1 Display settings 5.1.1 Wallpaper 5.1.1.1 Wallpaper list 5.1.1.2 Text color 5.1.2 Menu style 5.1.2.1 Bar style 5.1.2.2 Page style 5.1.3 Auto key lock 5.1.3.1 Off 5.1.3.2 15 seconds 5.1.3.3 30 seconds 5.1.3.4 1 minute 5.1.3.5 2 minutes 5.1.4 Contrast 5.1.5 Back light 5.1.5.1 Off 5.1.5.2 15 Seconds 5.1.5.3 30 Seconds 5.1.5.4 1 Minute 5.1.5.5 3 Minutes 5.1.5.6 10 Minutes 5.1.6 Graphic logo 5.2 Greeting message 5.3 Own number 5.4 Language 5.5 Security 5.5.1 PIN check 5.5.2 Change PIN 5.5.3 Phone lock 5.5.4 Change password 5.5.5 FDN mode*
5.5.6 Change PIN2*
5.6 Extra settings 5.6.1 Auto redial 5.6.2 Anykey answer 5.7 Short cut 5.7.1 Key up 5.7.2 Key down 5.7.3 Key right 5.7.4 Key left 5.8 Reset settings 6. Organizer (see page 90) 6.1 Alarm 6.2 Calendar 6.3 Time & date 6.4 Calculator 6.5 To do list 6.6 Voice memo 6.6.1 Record 6.6.2 Memo list 6.6.3 Delete all 6.7 Currency exchange Using the Menus 54 Using the Menus 55 9. AIM 9.1 Sign on 9.2. Offline convs. 9.3 Settings 9.3.1 Auto-sign on 9.3.2 Change password 9.3.3 Set AIM sounds 9.3.3.1 New IM 9.3.3.2 System message 9.3.3.3 Alert 9.4. Help 9.4.1 Sign up 9.4.2 Sign on 9.4.3 Buddy list 9.4.4 Sending IMs 9.4.5 Receiving IMs 9.4.6 Privacy 9.4.7 Away message 7. Network services (see page 99) 7.1 Call forwarding 7.1.1 Forward always 7.1.2 Busy 7.1.3 No reply 7.1.4 Unreachable 7.1.5 Cancel all 7.2 Call waiting 7.3 Network Selection 7.3.1 Automatic 7.3.2 Manual 7.4 Caller ID 7.4.1 Default 7.4.2 Hide number 7.4.3 Send number 8. Funbox (see page 103) 8.1 t-zones 8.1.1 Home 8.1.2 Favorite 8.1.3 http://
8.1.4 Clear Cache 8.1.5 Push Message 8.2 Games 8.2.1 Game1 8.2.2 Game2 8.2.3 Game3 8.2.4 Game4 8.3 Sounds 8.4 Images 8.5 Delete all 8.6 Memory status Using the Menus 56 Using the Menus 57 Text Messages The SMS (Short Message Service) function is a network service and may not be supported by your network. Messages can be sent by text, fax, Email and paging messaging systems, provided that these services are supported by your network. To send text messages by phone, you must obtain the number of the SMS centre from your service provider. When the message icon (
text messages. Two message boxes are available. Inbox: used to store the messages that you have received. Outbox: used to store the messages that you have already sent or will send. If the message memory is full, an error message is displayed and you cannot receive any new messages.
) appears, you have received new Note: Use the Delete option in the Inbox menu (Menu 1.1) to delete obsolete messages. Reading a Message 1. Select the required box and press the Select soft key. The list of messages in the box is displayed with the sender or recipients phone number or name, if it is available in your phonebook. 2. Select the required message and press the View soft key to view the message contents. 3. To scroll through the message, press the or key. While reading a message, you can choose the following options by pressing the Options soft key. Delete: allows you to delete obsolete messages. Text Reply (inbox only): allows you to reply to the sender by sending a text message. You can also change the SMS center number, if required. Call Back (inbox only): allows you to call the sender back. Cut Number: allows you to extract a number from the message text, so that you can call the number or save it in the phonebook. Send: allows you to send a message that you have received or saved. For further information on how to send a message, see page 59. Edit Message: allows you to edit a message. Select Objects: allows you to save the objects, such as sounds or images, from the message into your phone. You can then use the objects when writing a message; for details, see page 61. Note: The options available vary, depending on the message status
(new/old, not sent or sent for example). Create Via this menu, you can write and send a text message. Note: You can enter up to 918 alphanumeric characters for your message. If you add objects to the message, the number of characters you can enter will be decreased. Creating a Simple Text Message 1. Create your message as required. Note: For more information about entering characters, refer to page 40. Text Messages 58 Text Messages 59 2. When you have completed your message, press the Options soft key. The following options are available. Send only: allows you to send the message. The message will be deleted after sending. Save and send: allows you to save a copy of the message and then send the message to the required destination. You can read the message in your outbox using the Read Messages option. Save only: allows you to save the message so that it can be sent later. You can read the message in your outbox using the Read Messages option. Text formatting allows you to select the following options:
Size, Underline, and Strike through. Add content allows you to select the following objects:
Sound, Melody, Picture, Animation. Add templates provides the ability to select from a list of standard comments. You may edit these templates. Add from phonebook allows you to search through your entries in your phonebook. Add from bookmark allows you to select from bookmarks youve previously entered into your phone. Language allows you to change the language in the text input mode. For details about the options, see page 61. 3. Select Send Only or Save and Send, and press the Select soft key. If you want just to save the message, select Save Only. After saving the message, the phone returns to the Messages menu. 4. Enter a destination number and press the OK soft key. The message is sent. Text Messages 60 Creating a Message using the Options 1. Create your message as required. 2. Press the Options soft key. 3. Select one of the following options as required by using the and keys and pressing the Select soft key. Text Formatting: allows you to format the style of the text. For the Size attribute, the Normal, Large and Small sizes are available. For the Underline and Strike through attributes, select On or Off. The attributes can be combined. Add Objects: allows you to add the required sound, melody picture or animation to the message. Select the category of the object to be added: Sound, Melody, Picture and Animation are available. In each category, you can select the various factory-set items or choose an item received from other sources, such as the Internet or other phones. Add Templates: allows you to apply one of the preset message templates to the text. Select one of the five messages predefined via the Templates menu option
(Menu 1.4); for further details, see page 62. Language: allows you to change the language to be used in the T9 input mode. Select the language to be used. 4. Complete the message, and send or save it by following the procedure from Step 2 on page 60. Text Messages 61 Templates Using this menu, you can preset up to nine messages that you use most frequently. Scroll through the template list using the and keys. When the required message template is highlighted, press the Options soft key. Edit: allows you to write a new message or edit the selected message. Note: For further information on how to enter characters, refer to page 40. Send Message: allows you to recall the selected message. Once you have completed the message, you can send, save and send, or simply save it. For details on how to send a message, see page 59. Delete: allows you to delete the selected message. You are asked to confirm the deletion by pressing the Yes soft key. Settings Via this menu, you can set up default SMS information. A setting group is a collection of settings required to send messages. The number of setting groups available depends on the capacity of your SIM card. Setting x (where x is the setting group number): each group has its own sub-menu. Setting name: allows you to give a name to the setting group currently being defined. Service center: allows you to store or change the number of your SMS center required when sending messages. You must obtain this number from your service provider. Default destination Default type: allows you to set the default message type (Text, Fax, Email and Paging). The network can convert the messages into the selected format. Default validity: allows you to set the length of time for which your text messages will be stored at the message center while attempts are made to deliver them. Common setting: four options are available. Reply path: allows the recipient of your SMS message to send you a reply message via your message center, if the service is provided by the network. Delivery reports: allows you to activate or deactivate the report function. When this function is activated, the network informs you whether your message has been delivered or not. Bearer selection: allows you to choose between GSM and GPRS. Character Support Delete all This menu provides the option to delete messages saved on your SIM or Phone for both your Inbox and Outbox. In addition, it also provides the option to delete CB Messages and by selecting the All Messages, you are capable of deleting all at one time. Memory status This menu shows how many messages are currently stored in the SIM, phone and CB memories. Text Messages 62 Text Messages 63 Voice mail This menu provides you with a way of accessing your voice mailbox (if provided by your network). The following options are available. Call voice mail: before using this feature, you must enter the voice server number obtained from your service provider (see menu option 1.8.2). You can then select this option and simply press the OK soft key to listen to your messages. To quickly connect to the voice server, press and hold down the 1 key in idle mode. Voice server number: allows you to change the voice mail server number, if necessary. To... Then press the... Enter the server number Corresponding numeric keys. Correct a digit Move the cursor to the left/right without clearing the digit key. or key. Note: Voice Mail is a network feature. Please contact your service provider for more information. Broadcast This network service allows you to receive text messages on various topics, such as the weather or traffic. Messages are displayed immediately they are received, provided that:
The phone is in idle mode The Receive option is set to Enable The message channel is currently active in the channel list and The following options are available. Read: lets you view the message. Volatile displays the messages from the network, but loses its contents as soon as the phone is switched off. Scroll through the message by using keys. While reading a message, press the Save the soft key to store the message in the Archive box for later retrieval. Receive: allows you to enable or disable the reception of broadcast messages. Channel list: allows you to indicate the channels from which you wish to receive broadcast messages. The following options are available. Select: used to enable or disable channels in the list by marking or unmarking them respectively (a check mark is displayed in front of each channel selected). Add channel: used to declare the ID and title for a new channel. Delete: used to remove a channel from the list. Edit: used to change the ID and title of an existing channel. Language: allows you to select your preferred language to be used when displaying cell broadcast messages. Please contact your service provider for more information. Text Messages 64 Text Messages 65 Picture messages Multimedia Message Service (MMS) is a messaging service very similar to Short Message Service (SMS). It provides automatic and immediate delivery of personal multimedia messages from phone to phone or from phone to e-mail. In addition to the familiar text content of text messages, multimedia messages can contain images, graphics, voice and audio clips. An MMS message is a multimedia presentation in a single entry. It is not a text file with attachments. Using the MMS feature, your phone can receive multimedia messages. You can also send picture messages, which are short messages that contain images, such as your photos or graphics you downloaded from the Internet. This function is available only if it is supported by your service provider. Only phones that offer picture message features can receive and display picture messages. Inbox Viewing a Message When You Receive it When a new multimedia message comes in, the display shows the text notification along with the senders number. 1. Press the View soft key to view the message. The display shows brief information about the message, such as the senders number, the message size and the subject. If you want to view the message later in the Inbox, press the Exit soft key. 2. To scroll through the message information, press the Up or Down key. Picture messages 66 While viewing the information, press the Options soft key to use the following options:
Retrieve: shows you the message contents. Delete: deletes the message. Properties: shows you detailed information about the message. Viewing a Received Message in the Inbox When you access the Inbox menu option (Menu 2.1), the list of multimedia messages you received displays with the senders phone numbers, if they are available in your Phonebook, or subjects. The icons on the left tells you the status of the messages. Messages you already read. Messages you havent read yet. 1. Select a message and press the Select soft key to view the message. 2. To scroll through the message, press the Up or Down key. 3. Press the OK soft key on the message presentation screen. While viewing a message, you can choose the Message options by pressing the Options soft key. If you are viewing a new message, the options are the same as when you view a message as soon as you receive it. See the previous section. When you are reviewing a message, the following options are available:
Delete: deletes the message. Reply: allows you to reply to the sender by sending a text or picture message. Callback: allows you to call the sender back. Picture messages 67 Cut Address: allows you to extract the destination number from the message, so that you can call the number or save it in your Phonebook. Forward: allows you to forward the message to another person. Save picture: allows you to save an image from the message into your phone. Images are stored in the Pictures folder in the Fun Box menu option. Save sound: allows you to save a sound from the message into the Sounds folder in the Fun box menu option. Properties: shows you information about the message, such as subject, senders address, message size, status and priority. Outbox When you access this menu option, the list of the picture messages you sent or saved displays. The icons on the left tells you the status of the messages. Messages currently being sent Messages sent Messages your phone couldnt send Messages to be sent Messages forwarded 1. Select a message and press the Select soft key to view the message contents. 2. To scroll through the message, press the Up or Down key. 3. Press the OK soft key on the message presentation screen. While viewing a message, you can choose the following options by pressing the Options soft key:
Delete: deletes the message. Save address: allows you to extract the destination number from the message, so that you can call the number save it in your Phonebook. Send: allows you to resend the message. Edit: allows you to change the message contents, sound, picture or text. Properties: shows you information about the message, such as subject, recipients address, message size, status and priority. Draft After creating a picture message, you can store it in this message box for later sending. For further details about viewing a message, see Outbox on page 68. Create This menu option allows you to create a new picture message and then send it to multiple destinations. Creating and Sending a Picture Message 1. Enter the subject of your message and press the OK soft key. 2. When Add here highlights, press the Options soft key and add the message contents using one of the following options:
Add text: Enter the message text and press the OK soft key. Picture messages 68 Picture messages 69 Add picture: allows you to add a picturestored in the Pictures folder in the Funbox menu option. Choose a picture and press the Select soft key. Add sound: allows you to add a sound. You can record a new voice memo or use a sound stored in the Sounds folder in the Funbox menu option. Send: allows you to send the message. Use this option when you finish creating the message. This option is activated after you add a content to the message. Save: saves the message in the Draft or Templates box for later use. This option is activated after you add a content to the message. Settings: allows you to change the message settings. After changing, you need to press the key to go to back to the options screen. Add destination: allows you to enter destination addresses. See steps 7 to 10. After adding, you need to press the options screen. Preview: shows your message as it will display on the recipients phone. key to go to back to the soft key or the soft key or the Note: You can use the adding options only one time for one page. 3. When the added content displays, press the Down key to highlight Add here. 4. Repeat steps 2 and 3 until you finish creating your message. 5. If you want to change the added items, press the Up or Down key to highlight one and press the Options soft key. The following options are available:
Edit Text/Picture/Sound: allows you to change text or replace the image or sound with another one. Add page: allows you to add more pages. You can move to each page using the Left or Right key when Page highlights on the message screen. Delete: deletes the item from your message. Duration: allows you to set how long one page displays. After a specified length of time, the display scrolls to the next page. Send: allows you to send the message. Save: saves the message in the Draft or Templates box for later use. Settings: allows you to change the message settings. Add destination: allows you to enter destination addresses. See steps 7 to 10. Preview: shows your message as it will display on the recipients phone. Note: The options available are different depending on the item selected on the message screen. 6. When you finish creating the message, choose Send from the options and press the Select soft key. 7. Choose one of the following options and press the Select soft key:
Phone number: allows you to enter the phone number you want. E-Mail: allows you to enter the e-mail address of the recipient to send the message as an e-mail. Phone book: allows you to recall a number from your Phonebook. 8. Enter a number or an e-mail address, or select a number in Phonebook. Picture messages 70 Picture messages 71 9. When the correct number or address displays, press the OK soft key. 10. To send the message to multiple destinations, select Add destination and press the Select soft key. 11. Repeat steps 7 to 10. You can enter up to 11 destinations. If you want to edit the destinations, select one and press the Select soft key. You can change or delete it. 12.When you are finished entering the destinations, select Send Message and press the Select soft key. Your phone sends the message. Templates This menu option stores up to five messages you saved as templates. You can make a new message using the text of them. Scroll through the template list using the Up and Down keys. When the message template you want highlights, press the Select soft key. The message text displays. Press the OK soft key to use the following options:
Edit Message: allows you to send a message using the template. For further details about how to send a message, see page 79. Delete: allows you to delete the message. You are asked to confirm the deletion by pressing the Yes soft key. Delete all This menu option allows you to delete all of the picture messages in each message box, Inbox, Outbox and Draft. When a confirming message displays, press the Yes soft key to confirm. Picture messages 72 Memory status This menu option displays the pictures that you have maintained in the memory of your phone. Use the Next soft key to rotate through the pictures. Picture messages 73 Call records Via this menu, you can view the phone calls:
Missed Received Dialed Note: You can access all numbers in the three types of call records by pressing the key in idle mode. Missed calls This option lets you view the last 20 unanswered calls. The number and name, if available, are displayed, together with the date and time at which the call was received. By pressing the Options soft key, you can:
Edit the number if available and dial it or save it in the phonebook Delete the call from the list Incoming calls This option lets you view the last 20 phone calls answered. The number and name, if available, are displayed, together with the date and time at which the call was received. By pressing the Options soft key, you can:
Edit the number if available and dial it or save it in the phonebook Delete the call from the list Outgoing calls This option lets you view the last 20 numbers dialed. The number and name, if available, are displayed, together with the date and time at which the call was made. By pressing the Options soft key, you can:
Call records 74 Delete the number Edit the number and save it in the phonebook Delete all This option lets you delete calls using the following options:
All calls: All calls will be deleted, both incoming and outgoing. Missed calls: All missed calls will be deleted. Incoming calls: All incoming calls will be deleted. Outgoing calls: All outgoing calls will be deleted. Call time This option lets you view the timers for calls made and received. The following timers are available. Last call: length of the last call. Total outgoing: total length of all calls made since the timer was last reset. Total incoming: total length of all calls received since the timer was last reset. Reset timers: option used to reset the call timers; you must first enter the phone password (see page 86) and then press the OK soft key. Note: The actual time invoiced for calls by your service provider may vary, depending on network features, rounding-off for billing purposes and so forth. Call records 75 Call cost This feature lets you view the cost of calls. Note: AOC(Advice Of Charge) information may display in Idle Mode, depending on your SIM card or service provider. the following options are available:
Last call cost: cost of the last call made. Total cost: total cost of all calls made since the cost counter was last reset. If the total cost exceeds the maximum cost set via the Set max cost option, you can no longer make any calls until you reset the counter. Max cost: maximum cost set via the Set max cost option. Reset counters: option used to reset the cost counter; you must first enter your PIN2 (see page 87) and then press the Ok soft key. Set max cost: option used to enter the maximum cost that you authorise for your calls; you must first enter your PIN2 (see page 87) and then press the Ok soft key. Price/Unit: option used to set the cost of one unit; this price per unit is applied when calculating the cost of your calls; you must first enter your PIN2 (see page 87) and then press the Ok soft key. Sound settings You can use the Sound Settings feature to customise various settings, such as the:
Ring melody, volume and type Sounds made when you press a key, make an error or receive a message Note: When the phone is in the Silent mode (see page 28), you cannot change the sound settings. Ring tone This option allows you to select the required ring melody. You can choose between many different melodies. Each time you select a melody, it is played for a few seconds. If you have downloaded any sounds from the Internet or EasyGPRS program or received any ring tone messages, you can view the list in this menu. Ring volume This option allows you to adjust the ring volume to one of five levels. Use the the phone. keys or the Volume keys on the left side of and Call records 76 Sound settings 77 Alert type This option allows you to specify how you are to be informed of any incoming calls. The following options are available. Melody: the phone rings using the ring melody selected via the Ring tone menu option. Vibration: the phone vibrates but does not ring. Vibra+Melody: the phone first vibrates three times and then starts ringing. Keypad tone This option allows you to select the tone that the keypad generates when you press a key. The following options are available. Off: the keys do not make any sound. Cool: each key, when pressed, makes the same sound but is a different tone from the Beep option. Piano: each key, when pressed, plays the piano melody. Tone: each key, when pressed, makes a different sound. Beep: each key, when pressed, makes the same sound. Message tone This option allows you to select how the phone informs you that a new message has been received. SMS tone This option allows you to select how the phone informs you that a new SMS message has been received. The following options are available. Sound settings 78 SMS tone1~10: the phone uses an SMS tone. You are provided with ten SMS tones. OFF: the phone does not use the SMS tone. Light only: the service light at the top of the phone flashes. Vibration: the phone vibrates. Single beep: the phone beeps once. SMS-CB tone This option allows you to select how the phone informs you that a new cell broadcast (CB) message has been received. The following options are available. OFF: the phone does not use the CB tone. Light only: the service light at the top of the phone flashes. Vibration: the phone vibrates. Single beep: the phone beeps once. SMS-CB tone1~10: the phone uses a CB tone. You are provided with ten CB tones. MMS tone This option allows you to select how the phone informs you that a new MMS message has been received. The following options are available. MSG tone1~10: the phone uses an MMS tone. You are provided with ten MSG tones. OFF: the phone does not use the MMS tone. Light only: the service light at the top of the phone flashes. Vibration: the phone vibrates. Single beep: the phone beeps once. Sound settings 79 Power On/Off Use this option to chose the sound you prefer when turning your phone on or off. Three options are Off, Classical, and Cheerful. Extra tones You can customise various other tones used by the phone. To turn a given tone... Then press the... On Off Mark soft key. A check mark is displayed in front of the option. Unmark soft key again. The check mark is no longer displayed. The following options are available. Error tone: sets whether the phone informs you that you have made a mistake or not. Minute minder: sets whether the phone must beep every minute during an outgoing call to keep you informed of the length of your call. Connect tone: sets your phone to beep when the person you are calling answers the phone. Phone settings Many different features of your phone can be customised to suit your preferences. All of these features are accessed via the Phone settings menu. Display settings You can change the background image and the color of the components in the display according to your preference. Wallpaper This option allows you to change the background image
(wallpaper) to be displayed in idle mode. To change the background image, proceed as follows. 1. Scroll through the list by pressing the key. or You have various preset images available. You can also select the blank background and any images downloaded from the Internet or the EasyGPRS program. 2. Press the Select soft key when the required image is highlighted. The selected image is displayed. 3. After viewing the image, press the Select soft key to display it on the idle screen. 4. To change the Text color, scroll through the list by pressing or the Select soft key. key. Select the color desired and press the Sound settings 80 Phone settings 81 Menu style This option allows you to select the menu display style. You can choose between Bar style and Page style. Auto key lock Back light key. The phone displays Keypad active. When the Auto Key Lock feature is enabled, the phone keypad is locked and you must press the Unlock soft key then press the If you wish to keep your phone unlocked, you must go into the settings and change the option to Off. The following options are available. Off: the keypad is not locked. 15 Seconds: the keypad is locked after being idle for 15 seconds 30 Seconds: the keypad is locked after being idle for 30 seconds 1 Minute: the keypad is locked after being idle for 1 minute 2 Minutes: the keypad is locked after being idle for 2 minutes Contrast This option allows you to adjust the contrast of the display screens to make them lighter or darker. To adjust the display contrast, proceed as follows. 1. Adjust the contrast by using the keys or the and Volume keys on the left side of the phone. 2. When you are satisfied, press the OK soft key to save the selection. You can select whether or not the phone uses the backlight. A marginal increase in standby/talk time can be achieved by turning the backlight off. The following options are available. Off: the backlight is not used. 15 Seconds : the backlight comes on when you press a key or receive a call and switches off 15 seconds after the last key is pressed. 30 Seconds: the backlight comes on when you press a key or receive a call and switches off 30 seconds after the last key is pressed. 1 Minute: the backlight comes on when you press a key or receive a call and switches off 1 minute after the last key is pressed. 3 Minutes: the backlight comes on when you press a key or receive a call and switches off 3 minutes after the last key is pressed. 10 Minutes: the backlight comes on when you press a key or receive a call and switches off 10 minutes after the last key is pressed. Graphic logo This option allows you to display your operators logo instead of its name. On: The operator logo stored in your phone is displayed in idle mode; if no logo has been stored, the operator name is displayed. Off: The operator name is displayed in idle mode. Phone settings 82 Phone settings 83 Greeting message This option allows you to set a greeting message to be displayed briefly when the phone is switched on. The current message is displayed. To... Then press the... Clear the existing message key and hold it down until the message is cleared. Enter a new message Appropriate alphanumeric keys. Change the text input mode soft key. For further details on how to enter characters, refer to page 40. Own number This feature allows you to:
Assign a name to each of your own phone numbers registered on your SIM card Edit the names and numbers This function is a memory aid, which you can use to check your own phone numbers if you need to do so. Any changes made here do not in any way affect the actual subscriber numbers on your SIM card. Language You can select a display language. When the language option is set to Automatic, the language is automatically selected according to the language of the SIM card used. Security The Security feature enables you to restrict the use of your phone to:
The people of your choice The types of calls of your choice Various codes and passwords are used to protect the features of your phone. PIN check When the PIN Check feature is enabled, you must enter your PIN each time you switch the phone on. Consequently, any person who does not have your PIN cannot use your phone without your approval. Note: Before disabling the PIN Check feature, you must enter your PIN. To change your PIN, refer to the Change PIN menu option
(Menu 5.5.2). The following options are available. Disable: the phone connects directly to the network when you switch it on. Enable: you must enter the PIN each time the phone is switched on. Change PIN This feature allows you to change your current PIN to a new one, provided that the PIN Check feature is enabled. You must enter the current PIN before you can specify a new one. Once you have entered a new PIN, you are asked to confirm it by entering it again. Phone settings 84 Phone settings 85 Enable: you can only call phone numbers stored in the phonebook. You must enter your PIN2. Note: Not all SIM cards have a PIN2. If your SIM card does not, this menu option is not displayed. To change your PIN2, refer to the Change PIN2 menu option
(Menu 5.5.6) below. Change PIN2 The Change PIN2 feature allows you to change your current PIN2 to a new one. You must enter the current PIN2 before you can specify a new one. Once you have entered a new PIN2, you are asked to confirm it by entering it again. Note: Not all SIM cards have a PIN2. If your SIM card does not, this menu option is not displayed. Phone lock When the Phone Lock feature is enabled, the phone is locked and you must enter the 8-digit phone password each time the phone is switched on. The password is factory set to 00000000. To change the phone password, refer to the Change password menu option. Once the correct password has been entered, you can use the phone until you switch it off. The following options are available. Disable: you are not asked to enter the phone password when you switch the phone on. Enable: you are required to enter the phone password when you switch the phone on. Change password The Change Password feature allows you to change your current phone password to a new one. You must enter the current password before you can specify a new one. The password is factory set to 00000000. Once you have entered a new password, you are asked to confirm it by entering it again. FDN mode The FDN (Fixed Dial Number) mode, if supported by your SIM card, allows you to restrict your outgoing calls to a limited set of phone numbers. The following options are available. Disable: you can phone any number. Phone settings 86 Phone settings 87 Extra settings You can turn the automatic redialing or answering features on or off. To turn a feature... Then press the... On Off ON soft key. A check mark is displayed in front of the option. OFF soft key. The check mark is no longer displayed. The following options are available. Auto redial: when this option is checked, the phone makes up to ten attempts to redial a phone number after an unsuccessful call. Note: The interval between two call attempts varies. Anykey answer: when this option is checked, you can answer an incoming call by pressing any key, except the Reject soft key or the Reject soft key. To reject the call, press the key. When this option is unchecked, you can only press the or Accept soft key. key Short cut The navigation keys can be used as shortcut keys. When held down in idle mode, they allow you to access specific menu options directly. To assign a shortcut to a key, proceed as follows. 1. Select the key to be used as a shortcut key by pressing the or key, followed by the Select soft key. Key up (
) Key down (
Key right (
Key left (
) 2. Select the menu option to be assigned to the key by pressing the or key. Note: To deactivate a shortcut key, select the None option. 3. Press the Select soft key to save the selection. Reset settings You can easily reset your phone to its default configuration. To do so, proceed as follows. 1. Select the Reset settings menu option. 2. Enter the 8-digit phone password and press the OK soft key. Note: The password is preset to 00000000. To change this password, refer to page 86. Phone settings 88 Phone settings 89 Organizer The Organizer feature enables you to:
View the calendar and organize your schedule Define a list of things to do Set the current date and time Set the alarm so that the phone rings at a specific time (to remind you of an appointment for example) Use the phone as a calculator for basic mathematical equations or currency exchange operations Alarm This feature allows you to:
Set the alarm to ring at a specific time Set the phone to switch on automatically and ring the alarm even if the phone is switched off (Autopower menu option set to Enable) The following options are available. Once Alarm: the alarm rings only once and is then deactivated. Daily Alarm: the alarm rings every day at the same time. Morning Call: the alarm rings to wake you up in the morning. To set the alarm, proceed as follows. 1. Choose the type of alarm to be set. 2. Enter the required time and day of the week, if applicable. 3. Press the OK soft key. 4. If you select Morning Call in Step 1, select the repeat option: Monday to Friday or Monday to Saturday. Remove Alarm: deactivates all alarm settings. Autopower: if this option is set to Enable, the alarm will ring at the specified time, even when the phone is switched off. Organizer 90 If the menu option is set to Disable and the phone is switched off at the specified time, the alarm will not ring. To stop the alarm when it rings, press the Exit soft key. When setting or viewing an alarm, the following options are available when you press the Options soft key. Remove Alarm: deactivates the current alarm. Alarm Sound Set: allows you to select the alarm melody this option can be found in each of the Alarm options. Calendar With the Calendar feature, you can:
Consult the calendar Write memos to keep track of your schedule and trigger an alarm if necessary Consulting the Calendar When you select the Calendar menu option, the calendar is displayed. The following options are available when you press the Options soft key. Search all: displays all memos set, regardless of the day and starting with the oldest. To scroll through the memos, press the or key. Delete all: allows you to delete all memos. You are asked to confirm your action. Go to date: allows you to jump to a specific date. Exit: exits the Calendar feature and returns to the idle mode. Organizer 91 Writing a Memo To write or edit a memo on a specific date, proceed as follows. 1. Select the required date in the calendar, using the navigation keys. Note: To skip to the previous or next month, press the left side of the phone. keys on the 2. Press the Select soft key. An empty memo screen is displayed to allow you to enter your memo. 3. Enter your memo and then press the OK soft key. Note: For further details on how to enter characters, refer to page 40. You are asked if you wish to set the alarm. 4. If you want the alarm to ring on the chosen day, press the Yes soft key. Otherwise, press the No soft key. 5. If you pressed the Yes soft key, set the time for the alarm and press the OK soft key. The color of the date is changed to green to indicate that a memo exists. Editing a Memo 1. To edit a memo, selete the Calendar menu option. Select the date your memo is set to occur by using the right and left arrow keys. Press the Select soft key. 2. Press the Options soft key. 3. Select the Edit menu option and edit the memo appropriately. Note: I For further details about how to enter characters, refer to page 40. Organizer 92 Once you have finished editing the memo, press the OK soft key. The following options are then available when you press the Options soft key. Alarm: allows you to set the alarm to ring on the chosen day. Delete: allows you to delete the memo. Copy to: allows you to copy the memo to another date and/or time. Move to: allows you to change the date and/or time of the memo. Time & date This option allows you to change the current time and date displayed. You can also check the current time for Greenwich Mean Time (GMT) and 21 major cities around the world. The following options are available. Set Time: allows you to enter the current time. You can choose the time format via the Time Format menu option (Menu 6.3.4). Note: Before setting the time, you must specify your time zone, via the World Time menu option (Menu 6.3.3). and Set Date: allows you to enter the day, month and year. World Time: allows you to check the current time for Greenwich Mean Time (GMT) and 21 major cities around the world, using the The screen shows the:
City name Current date and time Time difference between the selected city and your city if you have set the local time (see below for further details) or GMT (by default) keys. Organizer 93 To select the time zone in which you are located, proceed as follows. 1. Select the city corresponding to your time zone by pressing and the key one or more times. The local date and time are displayed. 2. Press the Set soft key. Time Format: allows you to change the time format to 24 Hours or 12 Hours. Calculator With this feature, you can use the phone as a calculator. The calculator provides the basic arithmetic functions: addition, subtraction, multiplication and division. Using the Calculator 1. Enter the first number using the numeric keys. 2. Press the right soft key until the required arithmetic symbol appears: + (add), - (subtract), x (multiply), / (divide). 3. Enter the second number. 4. Repeat Steps 1 to 3 as many times as required. Note:
To erase any mistakes and clear the display, press the To include a decimal point or a bracket, press the left soft key until the key. required symbol is displayed. To do list This feature allows you to:
Draw up a list of tasks to be done Assign a priority and deadline to each task Sort the tasks by priority and status mark Creating the To Do List 1. Press the New soft key. 2. Enter the first task. Note: You can enter up to 40 characters. For further details on how to enter characters, see page 40. 3. Press the OK soft key. 4. Select high, normal or low priority using the or key and press the Select soft key. 5. Enter your deadline. If you do not want to set a deadline, press the Skip soft key. 6. Press the OK soft key. Editing the To Do List If tasks are already defined in the To Do List when you select the To Do List menu option (Menu 6.5), the current contents are displayed with the status mark and priority (three stars for high, two for normal and one for low). 5. To calculate the result, press the key. Organizer 94 Organizer 95 The following options are available. To... Then... View the details for a specific task Highlight the task. Press the View soft key. Change the status of a specific task Create a new task Edit an existing task key to mark the task as Highlight the task. Press the completed as of the current date and time. or Highlight the task. Press the Options soft key. Select the Mark option. Select the appropriate status (Done or Undo). Press the Options soft key. Select the New option. Enter the text, priority and deadline for the task. Highlight the task. Press the Options soft key. Select the Edit option. Change the text, priority and deadline for the task. Sort the existing tasks by priority or status Press the Options soft key. Select the Sort option. Select the sort criterion (High, Low, Done or Undo). Copy a task Highlight the task. Press the Options soft key. Select the Copy option. Change the text, priority and deadline for the task as required. To... Then... Copy a task to the calendar Delete a task Delete all tasks Highlight the task. Press the Options soft key. Select the Copy to calendar option. Change the text and deadline for the task and set the alarm as required. Highlight the task. Press the Options soft key. Select the Delete option. Press the Options soft key. Select the Delete all option. Confirm the deletion by pressing OK. Exit the To Do list Press the Options soft key. Select the Exit option. Voice memo Voice Memo allows you to record voice messages for your convenience. The following options are available. To... Record Then... Press the left soft key to BEGIN recording. Once you have completed the recording, press the left soft key again to STOP the recording. You can then 1. Replay 2. Re-record 3. Save 4. Quit Organizer 96 Organizer 97 To... Memo list Delete all Then... To review the memo list select the left soft key and use the through the list of memos. Press the Options soft key. key to scroll or Press the Select soft key. This will delete all the voice memos you have stored. Currency exchange Using this menu option, you can make currency conversions. 1. Enter the current exchange rate of your source currency and press the OK soft key. You can insert a decimal point by pressing the key. 2. Enter the amount for which you wish to conduct the currency conversion and press the OK soft key. The exchange rate amount you entered and equivalent value are displayed. 3. Press the Exit soft key to exit the currency convertor. Organizer 98 Network services These menu functions are network services. Please contact your service provider to check their availability and subscribe to them, if you so wish. Call forwarding This network service enables incoming calls to be rerouted to the number that you specify. Example:You may wish to forward your business calls to a colleague while you are on holiday. Call forwarding can be set up in the following ways. Forward always: all calls (Voice and Data) are forwarded to the designated number. To activate press the Activate soft key. To exit press the Exit soft key. Busy: calls are forwarded if you are already making another call. No reply: calls are forwarded if you do not answer the phone. Unreachable: calls are forwarded if you are not in an area covered by your service provider. Cancel all: all call forwarding options are cancelled. You can specify individual forwarding options for each of the following call types:
Voice calls only Data calls only Example:You can forward voice calls to your colleague if you are already using the phone. Network services 99 To set your call forwarding options, proceed as follows. 1. Select the type of call forwarding required by pressing the key until the appropriate option is highlighted, and or then press Select. 2. Select the type of calls to be forwarded by pressing the or key until the appropriate option is highlighted and then press Select. The current status is displayed. If the option has already been set, the number to which the calls are forwarded is displayed. To... Then... Activate call forwarding Press the Activate soft key. Go to Step 4. Change the call number Press the Change soft key. Go to Step 4. Deactivate call forwarding Press the Remove soft key. 3. Enter the number to which the calls are to be forwarded and press OK. To enter the international code, press the 0 key until the +
sign is displayed. The phone sends your settings to the network and the networks acknowledgement is displayed. You can deactivate all call forwarding settings by selecting the Cancel All option. Call waiting This network service enables you to be informed when someone is trying to reach you during another call. You can specify individual call waiting options for each of the following call types:
Voice calls only Data calls only To set your call waiting options, proceed as follows. 1. Select the type of calls to which the call waiting option is to key until the appropriate be applied by pressing the option is highlighted and then press the Select soft key. The screen informs you whether call waiting is activated or deactivated. or 2. You can activate or deactivate the call waiting feature as necessary by using the Activate or Deactivate soft key respectively. To return to the previous screen, press the Exit soft key. You can also deactivate all call waiting settings by selecting the Cancel All option. Network services 100 Network services 101 Network selection The Network Selection feature enables you to indicate whether the network used when roaming (outside your home area) is selected automatically or manually. Note: You can select a network other than your home network only if it has a valid roaming agreement with your home network. To indicate whether the network is to be selected automatically or manually when roaming, proceed as follows. 1. When Network selection is displayed, press the Select soft key. 2. Press the or key until the appropriate option is highlighted and then press the OK soft key. If you select Automatic, you are connected to the first available network when roaming. If you select Manual, the phone scans for the available networks. Go to Step 3. 3. Press the or key until the preferred network is highlighted and then press the OK soft key. You are connected to that network. Caller ID You can prevent your phone number from being displayed on the phone of the person being called. Note: Some networks do not allow the user to change this setting. The following options are available. Default: the default setting provided by the network is used. Hide number: your number is not displayed on the other persons phone. Send number: your number is sent each time you make a call. Network services 102 Funbox The Funbox menu contains several fun options. t-zones Your phone is equipped with a WAP Browser to allow you to access and navigate the Wireless Web via your phone. Using this menu, you can use the WAP browser. Home Selecting this option connects the phone to the network and loads the homepage of the Wireless Web service provider. You can also press the in Idle Mode. Favorite Selecting the Favorite option allows you to store the URL addresses of your favorite Web sites. You can access this menu directly by pressing and holding the # key while using the WAP browser. To store a URL address:
1. Select an empty location and press the Options soft key. 2. Enter the address and press the Enter soft key. 3. Enter a name for the favorite item and press the Enter soft key. After saving your favorite items, you can use the following options by pressing the Options soft key:
Goto URL: quickly accesses you to the site Edit: allows you to edit the address Delete: deletes the address. Funbox 103 http://
Selecting this option provides a starting point for you to enter the web address you wish to reach. Clear cache You can clear the information stored in the cache, the phones temporary memory which stores the most recently accessed Web pages. Press the Yes soft key to confirm the deletion. Otherwise, press the No soft key. Push message In this menu option, you can receive and access web messages from the server. The following options are available:
Inbox: allows you to read the messages received from the web server. Receive: allows you to set whether or not your phone receives web messages Delete all: allows you to delete all of the web messages. Games You can enjoy three games with your phone. Scroll to the required game, using the keys and press and the Select soft key. For further details on the game, refer to the on-screen help. Funbox 104 Sounds In this menu, you can view the list of sounds downloaded from the server. You can set the downloaded sounds as the current ring tone, but cannot send the sounds to other phones. When the memory is full, a warning message is displayed and the phone rejects additional sounds until you erase obsolete ones. Images In this menu, you can view the list of pictures downloaded from the server. You can set the downloaded pictures as the current background image, but cannot send them to other phones. When the memory is full, a warning message is displayed and the phone rejects additional pictures until you erase obsolete ones. Delete all This option allows you to delete all games, sounds, and images you have stored on your phone. To select one of these options, press the left soft key to Mark your choice. Then press the right soft key to Delete them. Memory status This option displays the memory used for games, sounds, and images. Press the Select soft key to view the following options:
Games: each time you press the Next soft key, the display shows the total, free and used space, and the number of objects you downloaded. Sounds and Images: each time you press the Next soft key, the display shows the total and free space, including the memory for objects in the Sounds and Images menus and the memory for voice memos. Funbox 105 Solving Problems Before contacting the after-sales service, perform the following simple checks. They may save you the time and expense of an unnecessary service call. When you switch your phone on, the following messages may appear Insert SIM Card Check that the SIM card is correctly installed. Phone Locked Enter Password The automatic locking function has been enabled. You must enter the phones password before you can use the phone. Enter PIN You are using your phone for the first time. You must enter the Personal Identification Number supplied with the SIM card. The option requiring that the PIN be entered each time the phone is switched on was enabled. You must enter your PIN and then disable this option if so required. Enter PUK The PIN code was entered wrongly three times in succession and the phone is now blocked. Enter the PUK supplied by your network operator. No service, Network failure or Not done is displayed The network connection was lost. You may be in a weak signal area (in a tunnel or surrounded by buildings). Move and try again. You are trying to access an option for which you have not taken out a subscription with your service provider. Contact the service provider for further details. You have entered a number but it was not dialed Have you pressed the Are you accessing the right cellular network?
You may have set an outgoing call blocking option. key?
Your correspondent cannot reach you Is your phone switched on (the key pressed for more than one second)?
Are you accessing the right cellular network?
You may have set an incoming call blocking option. Your correspondent cannot hear you speaking Have you switched off the microphone?
Are you holding the phone close enough to your mouth?
The microphone is located at the bottom of the phone. The phone starts beeping and **Warning** Low Battery flashes in the display The battery is insufficiently charged. Replace the battery and recharge it. Solving Problems 106 Solving Problems 107 The audio quality of the call is poor Check the signal strength indicator in the display (
the number of bars indicates the signal strength from strong (
) to weak (
). Try moving the phone slightly or moving closer to a window if you are in a building. No number is dialed when you recall a phonebook entry Check that the numbers have been stored correctly, by using the Phonebook Search feature. Re-store the number, if necessary. If the above guidelines do not enable you to solve the problem, take a note of:
The model and serial numbers of your phone Your warranty details A clear description of the problem Then contact your local dealer or Samsung after-sales service. Access Codes There are several access codes that are used by your phone and its SIM card. These codes help you protect the phone against unauthorized use. When requested for any of the codes explained below, key in the appropriate code (displayed as asterisks) and press the OK soft key. If you make a mistake, press the key one or more times until the incorrect digit is cleared and then continue entering the correct code. The access codes, except for the PUK and PUK2 codes can be changed using Security menu options (Menu 5.5). See page 85 for further details. Important! Avoid using access codes resembling emergency numbers, such as 911, so that you do not dial an emergency number accidentally. Phone Password The Phone Lock feature uses the phone password to protect your phone against unauthorized use. The phone password is supplied with the phone and is factory set to 00000000. To... Refer to... Activate/deactivate the Phone Lock feature Page 86
(Menu 5.5.3). Change the phone password Page 86
(Menu 5.5.4). Solving Problems 108 Access Codes 109 PIN The Personal Identification Number or PIN (4 to 8 digits) protects your SIM card against unauthorized use. It is usually supplied with the SIM card. If you enter an incorrect PIN three times in succession, the code is disabled and cannot be used until you re-enable it by entering the PUK (see below). To... Refer to... Activate/deactivate the PIN Check feature Page 85
(Menu 5.5.1). Change the PIN Page 85
(Menu 5.5.2). PUK The 8-digit PUK (Personal Unblocking Key) is required to change a disabled PIN. The PUK may be supplied with the SIM card. If not, or you have lost it, contact your service provider. To re-enable your PIN, proceed as follows. 1. Key in the PUK and press the OK soft key. 2. Enter a new PIN of your choice and press the OK soft key. 3. When the Confirm New PIN message is displayed, key in the same code again and press the OK soft key. If you enter an incorrect PUK ten times in succession, the SIM card becomes invalid. Contact your service provider for a new card. PIN2 The PIN2 (4 to 8 digits), supplied with some SIM cards, is required to access specific functions, such as setting the maximum cost of a call. These functions are available if supported by your SIM card. If you enter an incorrect PIN2 three times in succession, the code is disabled and you cannot access the functions until you re-enable it by entering the PUK2. To change the PIN2, refer to page 87 (Menu 5.5.7). PUK2 The 8-digit PUK2 (Personal Unblocking Key 2), supplied with some SIM cards, is required to change a disabled PIN2. If you lose the code, contact your service provider. To re-enable your PIN2, proceed as follows. 1. Key in the PUK2 and press the OK soft key. 2. Enter a new PIN2 of your choice and press the OK soft key. 3. When the Confirm PIN2 message is displayed, key in the same code again and press the OK soft key. If you enter an incorrect PUK2 ten times in succession, you will not be able to access the functions requiring the PIN2. Contact your service provider for a new card. Access Codes 110 Access Codes 111 WAP Browser Your phone comes equipped with a WAP (Wireless Application Protocol) browser, making it possible for you to access the Wireless Web. About the WAP Browser The WAP Browser allows you to:
Access up-to-the minute information via your phone View specially designed text versions of popular Internet sites including Yahoo!, CNN Mobile and the Weather Channel Browsing the Wireless Web using your phone is unlike using your computer, in that site provides have:
Selected only the critical aspects of their site for wireless phone users Removed most graphics Each time you start the WAP Browser, the phone connects to the Wireless Web and the service indicator icon appears on the display to inform you that you are:
Are connected to the Wireless Web Will be billed accordingly (rates vary according to your service option) The WAP Browser ends the network connection after a certain period of inactivity and automatically reconnects as necessary. For this reason, you may find that you are billed for several network connections within a single session. This is normal and is designed to minimize you bill. Accessing the WAP Browser To enter the t-zones menu to access the WAP browser:
1. When the idle Screen is displayed, press the Menu soft key to enter the menu mode. 2. Press the or until the Funbox menu option is displayed, and then press the Select soft key. You can also press the 8 key directly. 3. Press the or key one or more times to highlight t-
zones, then press the Select soft key. You can also press the 1 key directly. 4. Press the or key one or more times to highlight the required option and then press the Select soft key. Option Description Home http://
Favorite Connects the phone to the network and loads the homepage of the Wireless Web service provider. This option allows you to manually enter the URL address of the Web site that you wish to access. You can access this menu directly by pressing and holding down the key in the WAP Browser. Allows you to store the URL addresses of your favorite Web sites. You can access this menu key directly by pressing and holding the while using the WAP Browser. To store a URL address, select an empty location and enter the address. Three submenus are available. Select Go to URL to access the site quickly, Edit to edit the selected address and Delete to delete the selected address. WAP Browser 112 WAP Browser 113 Option Description Clear Cache Clears the information stored in the cache
(the phones temporary memory used to store the most recently accessed Web pages). Push Message In this menu option, you can receive and access web messages from the server. The following options are available:
Inbox: allows you to read the messages received from the web server. Receive: allows you to set whether or not your phone receives web messages. Delete All: allows you to delete all of the web messages. Starting the WAP Browser Using the WAP Browser Using the Soft Keys A bar containing browser commands is located at the bottom of the WAP Browser display. The soft keys below the bar are used to execute these commands. The two keys are called soft keys because their functions changes depending on the WAP Browser application in use. Navigating the Wap Browser To... Then.... Scroll through and select browser items and key until the Press the symbol points to the required item, and then press the OK soft key to confirm the selection. key or press the Menu soft key, followed by the To start the WAP Browser when the idle screen is displayed press the 8, 1 and 1 keys. A connection is established with your service provider and the corresponding homepage is displayed. The content of the WAP Browser startup homepage depends on your Wireless Web service provider. To scroll through the screen, use the keys. and Note: To access the startup homepage from any other screen in the WAP Browser, use the Home option. For more information on the WAP Browser menus, refer to... Exiting the WAP Browser To exit the browser at any time, simply press the press and hold down the key. key or WAP Browser 114 Select a numbered item Press the corresponding numeric key. Press the Back soft key or the key. Return to the previous page Return to the startup homepage Select the Home menu option; for more information on this option, refer to page 117. WAP Browser 115 Entering Text, Numbers or Symbols Using and Selecting WAP Menu Options When you are prompted to enter text, the current text entry mode is indicated on the screen. The following modes are available. Mode A/a 1 Description Allows you to enter letters in the alphabet. Press the corresponding key until the required letter is displayed Allows you to enter numbers. Note: To enter symbols, press the 1 key repeatedly until the required symbol is displayed. To... Then.... Change modes Enter a space Edit text Press the Press the key one or more times. Set the cursor to the right of the character to be corrected Press the Enter the correct character(s). key as required. Various menu options are available when you are using the WAP Browser to navigate the Wireless Web. To access a menu option, proceed as follows:
1. Press and hold down the key. A menu is displayed. 2. Highlight the required menu option by pressing the and keys. 3. Select the option by pressing the Select soft key. 4. If necessary, select the secondary option using the and keys, and press the Select soft key to confirm. Note: The menus may vary, depending on your version of the WAP Browser. Reload This option reloads the current page. Home This option takes you back at any time to the homepage of the Wireless Web service provider. Go to URL This option allows you to enter manually the URL address of the required Web page. After entering an address, press the OK soft key to go there directly. WAP Browser 116 WAP Browser 117 Show URL This feature displays the URL address of the site to which you are currently connected. It also enables you to declare the current site as the startup homepage. To... Press the... Declare the current page as your startup homepage Option soft key, select the Save to Home option and press Select. Set a bookmark for the current page Option soft key, select the Save to Bookmark option and press Select. Cancel your setting Back soft key. Health and Safety Information Usage guidelines:
All about performance and safety Getting the Most Out of Your Reception The quality of each call you make or receive depends on the signal strength in your area. Your phone informs you of the current signal strength by displaying a number of bars next to the signal strength icon. The more bars displayed, the stronger the signal. If youre inside a building, being near a window may give you better reception. Understanding the Power Save Feature If your phone is unable to find a signal after 15 minutes of searching, a Power Save feature is automatically activated. If your phone is active, it periodically rechecks service availability or you can check it yourself by pressing any key. Anytime the Power Save feature is activated, a message displays on the screen. When a signal is found, your phone returns to standby mode. Understanding How Your Phone Operates Your phone is basically a radio transmitter and receiver. When its turned on, it receives and transmits radio frequency (RF) signals. When you use your phone, the system handling your call controls the power level. This power can range from 0.006 watts to 0.2 watts in digital mode. WAP Browser 118 Health and Safety Information 119 Knowing Radio Frequency Safety The design of your phone complies with updated NCRP standards described below. In 1991-92, the Institute of Electrical and Electronics Engineers
(IEEE) and the American National Standards Institute (ANSI) joined in updating ANSIs 1982 standard for safety levels with respect to human exposure to RF signals. More than 120 scientists, engineers and physicians from universities, government health agencies and industries developed this updated standard after reviewing the available body of research. In 1993, the Federal Communications Commission
(FCC) adopted this updated standard in a regulation. In August 1996, the FCC adopted hybrid standard consisting of the existing ANSI/IEEE standard and the guidelines published by the National Council of Radiation Protection and Measurements
(NCRP). Maintaining Your Phones Peak Performance Note: For the best care of your phone, only authorized personnel should service your phone and accessories. Faulty service may void the warranty. There are several simple guidelines to operating your phone properly and maintaining safe, satisfactory service. Hold the phone with the antenna raised, fully-extended and over your shoulder. Try not to hold, bend or twist the phones antenna. Dont use the phone if the antenna is damaged. Speak directly into the phones receiver. Health and Safety Information 120 Maintaining Safe Use of and Access to Your Phone FAILURE TO FOLLOW THE INSTRUCTIONS OUTLINED MAY LEAD TO SERIOUS PERSONAL INJURY AND POSSIBLE PROPERTY DAMAGE IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE INSTRUCTIONS. DANGER - TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, CAREFULLY FOLLOW THESE INSTRUCTIONS. FOR CONNECTION TO A SUPPLY NOT IN THE U.S.A., USE AN ATTACHMENT PLUG ADAPTOR OF THE PROPER CONFIGURATION FOR THE POWER OUTLET. Using Your Phone While Driving Talking on your phone while driving is illegal in some states. Even where its not, it can divert your attention from driving. Remember that safety always comes first. When using your phone in the car:
Get to know your phone and its features, such as speed dial and redial. When available, use a hands-free device. Position your phone within easy reach. Let the person you are speaking to know you are driving; if necessary, suspend the call in heavy traffic or hazardous weather conditions. Do not take notes or look up phone numbers while driving. Dial sensibly and assess the traffic; if possible, place calls when you stationary or before pulling into traffic. Do not engage in stressful or emotional conversations that may divert your attention from the road. Dial 9,1,1 to report serious emergencies. Its free from your wireless phone. Use your phone to help others in emergencies. Call special non-emergency wireless number when necessary. Health and Safety Information 121 Following Safety Guidelines Note: Always turn off the phone in health care facilities and request permission before using the phone near medical equipment. To operate your phone safely and efficiently, always follow any special regulations in a given area. Turn your phone off in areas where use is forbidden or when it may cause interference or danger. Using Your Phone Near Other Electronic Devices Most modern electronic equipment is shielded from radio frequency (RF) signals. However, RF signals from wireless phones may affect inadequately shielded electronic equipment. RF signals may affect improperly installed or inadequately shielded electronic operating systems and/or entertainment systems in motor vehicles. Check with the manufacturer or their representative to determine if these systems are adequately shielded from external RF signals. Also check with the manufacturer regarding any equipment that has been added to your vehicle. Consult the manufacturer of any personal medical devices, such as pacemakers and hearing aids, to determine if they are adequately shielded from external RF signals. Turning Off Your Phone Before Flying Turn off your phone before boarding any aircraft. To prevent possible interference with aircraft systems, the U.S. Federal Aviation Administration (FAA) regulations require you to have permission from a crew member to use your phone while the plane is on the ground. To prevent any risk of interference, FCC regulations prohibit using your phone while the plane is in the air. Turning Off Your Phone in Dangerous Areas To avoid interfering with blasting operations, turn off your phone when in a blasting area or in other areas with signs indicating that two-way radios should be turned off. Construction crews often use remote-control RF devices to set off explosives. Note: Never transport or store flammable gas, liquid or explosives in the compartment of your vehicle that contains your phone or accessories. Turn off your phone when youre in any area that has a potentially explosive atmosphere. Although its rare, your phone or its accessories could generate sparks. Sparks could cause an explosion or a fire resulting in bodily injury or even death. These areas are often, but not always, clearly marked. They include:
Fueling areas such as gas stations. Below deck on boats. Fuel or chemical transfer or storage facilities. Areas where the air contains chemicals or particles such as grain, dust or metal powders. Any other area where you would normally be advised to turn off your vehicles engine. Restricting Childrens Access to your Phone Your phone is not a toy. Children should not be allowed to play with it because they could hurt themselves and others, damage the phone or make calls that increase your phone bill. Health and Safety Information 122 Health and Safety Information 123 Caring for the Battery The guidelines listed below help you get the most out of your batterys performance. Use only Samsung-approved batteries and desktop chargers. These chargers are designed to maximize battery life. Using other batteries or chargers voids your warranty and may cause damage. In order to avoid damage, charge the battery only in temperatures that range from 32 F to 104 F
(0 C to 40 C). Dont use the battery charger in direct sunlight or in high humidity areas, such as the bathroom. Never dispose of the battery by incineration. Keep the metal contacts on top of the battery clean. Dont attempt to disassemble or short-circuit the battery. The battery may need recharging if it has not been used for a long period of time. Its best to replace the battery when it no longer provides acceptable performance. It can be recharged hundreds of times before it needs replacing. Dont store the battery in high temperature areas for long periods of time. Its best to follow these storage rules:
Less than one month 32 F to 104 F (0 C to 40 C) Disposal of Lithium Ion (Li-Ion) Batteries For safe disposal options of your Li-Ion batteries, contact your nearest Samsung-authorized service center. For safety, do not handle a damaged or leaking Li-Ion battery. Be sure to dispose of your battery properly. In some areas, the disposal of batteries in household or business trash may be prohibited. Acknowledging Special Precautions and FCC FCC Notice The phone may cause TV or radio interference if used in close proximity to receiving equipment. The FCC can require you to stop using the phone if such interference cannot be eliminated. Vehicles using liquefied petroleum gas (such as propane or butane) must comply with the National Fire Protection Standard
(NFPA-58). For a copy of this standard, contact the National Fire Protection Association, One Batterymarch Park, Quincy, MA 02269, Attn: Publication Sales Division. Cautions Any changes or modifications to your phone not expressly approved in this document could void your warranty for this equipment, and void your authority to operate this equipment. Only use approved batteries, antennas and chargers. The use of any unauthorized accessories may be dangerous and void the phone warranty if said accessories cause damage or a defect to the phone. Although your phone is quite sturdy, it is a complex piece of equipment and can be broken. Avoid dropping, hitting, bending or sitting on it. Body-Worn Operation To maintain compliance with FCC RF exposure requirements, use only belt-clips, holsters or similar accessories that maintain a 1.5 cm. separation distance between the user's body and the back of the phone, including the antenna. The use of belt-clips, holsters and similar accessories should not contain metallic components in its assembly. The use of accessories that do not satisfy these requirements may not comply with FCC RF exposure requirements, and should be avoided. For more information about RF exposure, please visit the FCC website at www.fcc.gov. Health and Safety Information 124 Health and Safety Information 125 SAR Values Head: 1.16 (W/kg) Body-worn: 0.404 (W/kg) Distance: 1.5 (cm) FDA Consumer Update Do wireless phones pose a health hazard?
The available scientific evidence does not show that any health problems are associated with using wireless phones. There is no proof, however, that wireless phones are absolutely safe. Wireless phones emit low levels of radio frequency energy (RF) in the microwave range while being used. They also emit very low levels of RF when in stand-by mode. Whereas high levels of RF can produce health effects (by heating tissue), exposure to low level RF that does not produce heating effects causes no known adverse health effects. Many studies of low level RF exposures have not found any biological effects. Some studies have suggested that some biological effects may occur, but such findings have not been confirmed by additional research. In some cases, other researchers have had difficulty in reproducing those studies, or in determining the reasons for inconsistent results. What is FDAs role concerning the safety of wireless phones?
Under the law, FDA does not review the safety of radiation-
emitting consumer products such as wireless phones before they can be sold, as it does with new drugs or medical devices. However, the agency has authority to take action if wireless phones are shown to emit radio frequency energy (RF) at a level that is hazardous to the user. In such a case, FDA could require the manufacturers of wireless phones to notify users of the health hazard and to repair, replace or recall the phones so that the hazard no longer exists. Health and Safety Information 126 Although the existing scientific data do not justify FDA regulatory actions, FDA has urged the wireless phone industry to take a number of steps, including the following:
Support needed research into possible biological effects of RF of the type emitted by wireless phones;
Design wireless phones in a way that minimizes any RF exposure to the user that it is not necessary for device function; and Cooperate in providing users of wireless phones with the best possible information on possible effects of wireless phone use on human health. FDA belongs to a interagency working group of the federal agencies that have responsibility for different aspects of RF safety to ensure coordinated efforts at the federal level. The following agencies belong to this working group:
National Institute for Occupational Safety and Health Environmental Protection Agency Federal Communications Committee Occupational Safety and Health Administration The National Institutes of Health participates in some interagency working group activities, as well. FDA shares regulatory responsibilities about wireless phones with the Federal Communications Commission (FCC). All phones that are sold in the United States must comply with FCC safety guidelines that limit RF exposure. FCC relies on FDA and other health agencies for safety questions about wireless phones. FCC also regulates the base stations that the wireless phone networks rely upon. While these base stations operate at higher power than do the wireless phones themselves, the wireless exposures that people get from these base stations are typically thousands of times lower than those they get from wireless phones. Base stations are thus not the subject of the safety questions discussed in this document. Health and Safety Information 127 What kinds of phones are the subject of this update?
The term wireless phones refers here to hand-held wireless phones with built-in antennas, often called cell, mobile, or PCS. These types of wireless phones can expose the user to measurable radio frequency energy (RF) because of the short distance between the phone and the users head. These RF exposures are limited by Federal Communications Commission safety guidelines that were developed with the advice of FDA and other federal health and safety agencies. When the phone is located at greater distances from the user, the exposure to RF is drastically lower because a persons RF exposure decreases rapidly with increasing distance from the source. The so-called cordless phones which have a base unit connected to the phone wiring in a house, typically operate at far lower per levels, and thus produce RF exposures far below the FCC safety limits. What are the results of the research done already?
The research done thus far has produced conflicting results, and many studies have suffered from flaws in their research methods. Animal experiments investigating the effects of radio frequency energy (RF) exposures characteristic of wireless phones have yielded conflicting results that often cannot be repeated in other laboratories. A few animal studies, however, have suggested that low levels of RF could Accelerate the development of cancer in laboratory animals. However, many of the studies that showed increased tumor development used animals that had been genetically engineered or treated with cancer-causing chemicals so as to be pre-disposed to develop cancer in absence of RF exposure. Other studies exposed the animals to RF for up to 22 hours per day. These conditions are not similar to the conditions under which people use wireless phones, so we dont know with certainty what results of such studies mean for human health. Health and Safety Information 128 Three large epidemiology studies have been published since December 2000. Between them, the studies investigated any possible association between the use of wireless phones and primary brain cancer, glaucoma, meningioma, or acoustic neuroma, tumors of the brain or salivary gland, leukemia, or other cancers. None of the studies demonstrated the existence of any harmful health effects from wireless phones RF exposures. However, none of the studies can answer questions about long-term exposures, since average period of phone use in these studies was around three years. What research is needed to decide whether RF exposure from wireless phones poses a health threat?
A combination of laboratory studies and epidemiological studies of people actually using wireless phones would provide some of the data that are needed. Lifetime animal exposure studies could be completed in a few years. However, very large numbers of animals would be needed to provide reliable proof of a cancer promoting effect if one exists. Epidemiological studies can provide data that is directly applicable to human populations, but ten or more years follow-up may be needed to provide answers about some health effects, such as cancer. This is because the interval between the time of exposure to a cancer-causing agent and the time tumors develop - if they do -
may be many, many years. The interpretation of epidemiological studies is hampered by difficulties in measuring actual RF exposure during day-to-day use of wireless phones. Many factors affect this measurement, such as the angle at which the phone is held, or which model of phone is used. Health and Safety Information 129 What is FDA doing to find out more about the possible health effects of wireless phone RF?
FDA is working with the U.S. Toxicology Program and with groups of investigators around the world to ensure that high priority animal studies are conducted to address important questions about the effects of exposure to radio frequency energy (RF). FDA has been a leading participant in the World Health Organization International Electromagnetic Fields (EMF) Project since its inception in 1996. An influential result of tis work has been the development of a detailed agenda of research needs that has driven the establishment of new research programs around the world. The project has also helped develop a series of public information documents on EMF issues. FDA and the Cellular Telecommunications & Internet Association
(CTIA) have a formal Cooperative Research and Development Agreement (CRADA) to do research on wireless phone safety. FDA provides the scientific oversight, obtaining input from experts in government, industry, and academic organizations. CTIA-funded research is conducted through contracts to independent investigators. The initial research will include both laboratory studies and studies of wireless phone users. The CRADA will also include a broad assessment of additional research needs in the context of the latest research developments around the world. Health and Safety Information 130 How can I find out how much radio frequency energy exposure I can get by using my wireless phone?
All phones sold in the United States must comply with Federal Communications Commission (FCC) guidelines that limit radio frequency energy (RF) exposures. FCC established these guidelines in consultation with FDA and other federal health and safety agencies. The FCC limit for exposure from wireless telephones is set at a Specific Absorption Rate (SAR) of 1.6 watts per kilogram (1.6 W/kg). The FCC limit is consistent with the safety standards developed by the Institute of Electrical and Electronic Engineering (IEEE) and the National Council on Radiation Protection and Measurement. The exposure limit takes into consideration the bodys ability to remove heat from the tissue that absorb energy from the wireless phone and is set well below levels known to have effects. Manufacturers of wireless phones must report the RF exposure level for each model of phone to the FCC. The FCC website
(http://www.fcc.gov/oet/rfsafety) gives directions for locating the FCC identification number on your phone so you can find your phones RF exposure level in the online listing. What has FDA done to measure the radio frequency energy coming from wireless phones?
The Institute of Electrical and Electronic Engineers (IEEE) is developing a technical standard for measuring the radio frequency energy (RF) exposure from wireless phones and other wireless hand sets with the participation and leadership of FDA scientists and engineers. The standard, Recommended Practice for Determining the Spatial-Peak Specific Absorption Rate (SAR) in the Human Body Due to Wireless Communications Devices: Experimental Techniques, sets forth the first consistent test methodology for measuring the rate at which RF is deposited in the heads of wireless phone users. The test method uses a tissue-simulating model of the human head. Health and Safety Information 131 Standardized SAR test methodology is expected to greatly improve the consistency of measurements made at different laboratories on the same phone. SAR is the measurement of the amount of energy absorbed in tissue, either by the whole body or a small part of the body. It is measured in watts/kg (or milliwatts/g) of matter. This measurement is used to determine whether a wireless phone complies with safety guidelines. What steps can I take to reduce my exposure to radio frequency energy from my wireless phone?
If there is a risk from these products--and at this point we do not know that there is--it is probably very small. But if you are concerned about avoiding even potential risks, you can take a few simple steps to minimize your exposure to radio frequency energy (RF). Since time is a key factor in how much exposure a person receives, reducing the amount of time spent using a wireless phone will reduce RF exposure. If you must conduct extended conversations by wireless phone every day, you could place more distance between your body and the source of the RF, since the exposure level drops off dramatically with distance. For example, you could use a headset and carry the wireless phone away from your body or use a wireless phone connected to a remote antenna. Again, the scientific data do not demonstrate that wireless phones are harmful. But if you are concerned about RF exposure from these products, you can use measures like those described above to reduce your RF exposure from wireless phone use. What about children using wireless phones?
The scientific evidence does not show a danger to users of wireless phones, including children and teenagers. If you want to take steps to lower exposure to radio frequency energy (RF), the measured described above would apply to children and teenagers using wireless phones. Reducing the time of wireless phone use and increasing the distance between the user and the RF source will reduce RF exposure. Some groups sponsored by other national governments have advised that children be discouraged from using wireless phones at all. For example, the government in the United Kingdom distributed leaflets containing such a recommendation in December 2000. They noted that no evidence exists that using a wireless phone causes brain tumors or other ill effects. Their recommendation to limit wireless phone use by children was strictly precautionary; it was not based on scientific evidence that any health hazard exists. What about wireless phone interference with medical equipment?
Radio frequency energy (RF) from wireless phones can interact with some electronic devices. For this reason, FDA helped develop a detailed test method to measure electromagnetic interference (EMI) of implanted cardiac pacemakers and defibrillators from wireless telephones. This test method is now part of a standard sponsored by the Association for the Advancement of Medical instrumentation (AAMI). The final draft, a joint effort by FDA, medical device manufacturers, and many other groups, was completed on late 2000. This standard will allow manufacturers to ensure that cardiac pacemakers and defibrillators are safe from wireless phone EMI. Health and Safety Information 132 Health and Safety Information 133 FDA has tested hearing aids for interference from handheld wireless phones and helped develop a voluntary standard sponsored by the Institute of Electrical and Electronic Engineers
(IEEE). This standard specifies test methods and performance requirements for hearing aids and wireless phones so that no interference occurs when a person uses a compatible phone and a compatible hearing aid at the same time. This standard was approved by the IEEE in 2000. FDA continues to monitor the use of wireless phones for possible interactions with other medical devices. Should harmful interference be found to occur, FDA will conduct testing to assess the interference and work to resolve the problem. Where can I find additional information?
For additional information, please refer to the following resources:
FDA web page on wireless phones
(http://www.fda.gov/cdrh/phones/index.html) Federal Communications Commission FCC) RF Safety Program
(http://www.fda.gov/oet/rfsafety) International Commission on Non-Ionizing Radiation Protection
(http://www.icnirp.de) World Health Organization (WHO) International EMF Project
(http://www.who.int/emf) National Radiological Protection Board (UK)
(http://www.nrpb.org.uk) CTIA Safety Information Exposure to radio frequency signals Your wireless hand held portable telephone is a low power radio transmitter and receiver. When it is ON, it receives and also sends out radio frequency (RF) signals. In August, 1996, the Federal Communications Commissions
(FCC) adopted RF exposure guidelines with safety levels for hand-held wireless phones. Those guidelines are consistent with the safety standards previously set by both U.S. and international standard bodies:
ANSI C95.1 (1992) NCRP Report 86 (1986) ICNIRP (1996) Those standards were based on comprehensive and periodic evaluations of the relevant scientific literature. For example, over 120 scientists, engineers, and physicians from universities, government health agencies, and industry reviewed the available body of research to develop the ANSI Standard
(C95.1). The design of your phone complies with the FCC guidelines (and those standards). Antenna care Use only the specified of approved replacement antenna. Unauthorized antennas, modifications, or attachments could damage the phone and may violate FCC regulations. Health and Safety Information 134 Health and Safety Information 135 Phone operation Electronic devices NORMAL POSITION: Hold the phone as you would any other telephone with the antenna pointed up and over your shoulder. Tips on efficient operation:
For your phone to operate most efficiently:
Extend your antenna fully. Do not touch the antenna unnecessarily when the phone is in use. Contact with the antenna affects call quality and may cause the phone to operate at a higher power level than otherwise needed. Driving Check the laws and regulations on the use of wireless telephones in the areas where you drive. Always obey them. Also, if using your phone while driving, please:
Give full attention to driving--driving safety is your first responsibility. Use hands-free operation, if available. Pull off the road and park before making or answering a call if driving conditions so require. Health and Safety Information 136 Most modern electronic equipment is shielded from RF signals. However, certain electronic equipment may not be shielded against RF signals from your wireless phone. Pacemakers The Health Industry Manufacturers Association recommends that a minimum separation of six (6) inches be maintained between a hand-held wireless phone and a pacemaker to avoid potential interference with the pacemaker. These recommendations are consistent with the independent research by and recommendations of Wireless Technology Research. Persons with pacemakers:
Should ALWAYS keep the phone more than six inches from their pacemaker when the pacemaker is turned on;
Should not carry the phone in a breast pocket;
Should use the ear opposite the pacemaker to minimize the potential for interference. If you have any reason to suspect that interference is taking place, turn your phone OFF immediately. Hearing aids Some digital wireless phones may interfere with some hearing aids. In the event of such interference, you may want to consult your service provider (or call the customer service line to discuss alternatives.) Optional for each phone manufacturer. Other medical devices If you use any other personal medical device, consult the manufacturer of your device to determine if they are adequately shielded from external RF energy. Your physician may be able to assist you in obtaining this information. Turn your phone OFF in health care facilities when any regulations posted in these areas instruct you to do so. Hospitals or health care facilities may be using equipment that could be sensitive to external RF energy. Health and Safety Information 137 For vehicles equipped with an airbag An airbag inflates with great force. DO NOT place objects, including both installed or portable wireless equipment, in the area over the air bag deployment area. If in-vehicle wireless equipment is improperly installed and the air bag inflates, serious injury could result. Owner's Record The model number, regulatory number and serial number are located on a nameplate inside the battery compartment. Record the serial number in the space provided below. This will be helpful if you need to contact us about your phone in the future. Model: SGH-C225 Serial No.:
User Guide Proprietary Notice T9 Text Input is licensed by Tegic Communications and is covered by U.S. Pat. 5,818,437, U.S. Pat. 5,953,541, U.S. Pat. 6,011,554 and other patents pending. Vehicles RF signals may affect improperly installed or inadequately shielded electronic systems in motor vehicles. Check with the manufacturer or its representative regarding your vehicle. You should also consult the manufacturer of any equipment that has been added to your vehicle. Posted facilities Turn your phone OFF in any facility where posted notices so require. Aircraft FCC regulations prohibit using your phone while in the air. Switch OFF your phone before boarding an aircraft. Blasting areas To avoid interfering with blasting operations, turn your phone OFF when in a blasting area or in areas posted: Turn off two-
way radio. Obey all signs and instructions. Potentially explosive atmospheres Turn your phone OFF when in any area with a potentially explosive atmosphere and obey all signs and instructions. Sparks in such areas could cause an explosion or fire resulting in bodily injury of even death. Areas with a potentially explosive atmosphere are often but not always clearly marked. They include fueling areas such as gasoline stations; below deck on boats; fuel or chemical transfer or storage facilities; vehicles using liguefied petroleum gas (such as propane or butane); areas where the air contains chemicals or particles, such as grain, dust, or metal powders;
and any other area where you would normally be advised to turn off your vehicle engine. Health and Safety Information 138 Health and Safety Information 139 STANDARD LIMITED WARRANTY What is Covered and For How Long? SAMSUNG TELECOMMUNICATIONS AMERICA, L.P. (SAMSUNG) warrants to the original purchaser ("Purchaser") that SAMSUNGs Phones and accessories ("Products") are free from defects in material and workmanship under normal use and service for the period commencing upon the date of purchase and continuing for the following specified period of time after that date:
Phone Batteries Leather Case/Pouch Holster Other Phone Accessories 1 Year 1 Year 90 Days 90 Days 1 Year What is Not Covered? This Limited Warranty is conditioned upon proper use of Product by Purchaser. This Limited Warranty does not cover: (a) defects or damage resulting from accident, misuse, abuse, neglect, unusual physical, electrical or electromechanical stress, or modification of any part of Product, including antenna, or cosmetic damage; (b) equipment that has the serial number removed or made illegible; (c) any plastic surfaces or other externally exposed parts that are scratched or damaged due to normal use; (d) malfunctions resulting from the use of Product in conjunction with accessories, products, or ancillary/peripheral equipment not furnished or approved by SAMSUNG; (e) defects or damage from improper testing, operation, maintenance, installation, or adjustment; (f) installation, maintenance, and service of Product, or (g) Product used or purchased outside the United States or Canada. This Limited Warranty covers batteries only if battery capacity falls below 80% of rated capacity or the battery leaks, and this Limited Warranty does not cover any battery if (i) the battery has been charged by a battery charger not specified or approved by SAMSUNG for charging the battery, (ii) any of the seals on the battery are broken or show evidence of tampering, or (iii) the battery has been used in equipment other than the SAMSUNG phone for which it is specified. What are SAMSUNGs Obligations? During the applicable warranty period, SAMSUNG will repair or replace, at SAMSUNGs sole option, without charge to Purchaser, any defective component part of Product. To obtain service under this Limited Warranty, Purchaser must return Product to an authorized phone service facility in an adequate container for shipping, accompanied by Purchasers sales receipt or comparable substitute proof of sale showing the date of purchase, the serial number of Product and the sellers name and address. To obtain assistance on where to deliver the Product, call Samsung Customer Care at 1-888-987-4357. Upon receipt, SAMSUNG will promptly repair or replace the defective Product. SAMSUNG may, at SAMSUNGs sole option, use rebuilt, reconditioned, or new parts or components when repairing any Product or replace Product with a rebuilt, reconditioned or new Product. Repaired/replaced leather cases, pouches and holsters will be warranted for a period of ninety
(90) days. All other repaired/replaced Product will be warranted for a period equal to the remainder of the original Limited Warranty on the original Product or for 90 days, whichever is longer. All replaced parts, components, boards and equipment shall become the property of SAMSUNG. If SAMSUNG determines that any Product is not covered by this Limited Warranty, Purchaser must pay all parts, shipping, and labor charges for the repair or return of such Product. STANDARD LIMITED WARRANTY 140 STANDARD LIMITED WARRANTY 141 What Are the Limits On SAMSUNGs Liability? EXCEPT AS SET FORTH IN THE EXPRESS WARRANTY CONTAINED HEREIN, PURCHASER TAKES THE PRODUCT AS IS, AND SAMSUNG MAKES NO WARRANTY OR REPRESENTATION AND THERE ARE NO CONDITIONS, EXPRESS OR IMPLIED, STATUTORY OR OTHERWISE, OF ANY KIND WHATSOEVER WITH RESPECT TO THE PRODUCT, INCLUDING BUT NOT LIMITED TO:
THE MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS FOR ANY PARTICULAR PURPOSE OR USE;
WARRANTIES OF TITLE OR NON-INFRINGEMENT;
DESIGN, CONDITION, QUALITY, OR PERFORMANCE OF THE PRODUCT;
THE WORKMANSHIP OF THE PRODUCT OR THE COMPONENTS CONTAINED THEREIN; OR COMPLIANCE OF THE PRODUCT WITH THE REQUIREMENTS OF ANY LAW, RULE, SPECIFICATION OR CONTRACT PERTAINING THERETO. NOTHING CONTAINED IN THE INSTRUCTION MANUAL SHALL BE CONSTRUED TO CREATE AN EXPRESS WARRANTY OF ANY KIND WHATSOEVER WITH RESPECT TO THE PRODUCT. ALL IMPLIED WARRANTIES AND CONDITIONS THAT MAY ARISE BY OPERATION OF LAW, INCLUDING IF APPLICABLE THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY LIMITED TO THE SAME DURATION OF TIME AS THE EXPRESS WRITTEN WARRANTY STATED HEREIN. SOME STATES/PROVINCES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU. IN ADDITION, SAMSUNG SHALL NOT BE LIABLE FOR ANY DAMAGES OF ANY KIND RESULTING FROM THE PURCHASE, USE, OR MISUSE OF, OR INABILITY TO USE THE PRODUCT OR ARISING DIRECTLY OR INDIRECTLY FROM THE USE OR LOSS OF USE OF THE PRODUCT OR FROM THE BREACH OF THE EXPRESS WARRANTY, INCLUDING INCIDENTAL, SPECIAL, STANDARD LIMITED WARRANTY 142 CONSEQUENTIAL OR SIMILAR DAMAGES, OR LOSS OF ANTICIPATED PROFITS OR BENEFITS, OR FOR DAMAGES ARISING FROM ANY TORT (INCLUDING NEGLIGENCE OR GROSS NEGLIGENCE) OR FAULT COMMITTED BY SAMSUNG, ITS AGENTS OR EMPLOYEES, OR FOR ANY BREACH OF CONTRACT OR FOR ANY CLAIM BROUGHT AGAINST PURCHASER BY ANY OTHER PARTY. SOME STATES/PROVINCES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS, WHICH VARY FROM STATE TO STATE/PROVINCE TO PROVINCE. THIS LIMITED WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE ORIGINAL PURCHASER OF THIS PRODUCT AND STATES PURCHASERS EXCLUSIVE REMEDY. IF ANY PORTION OF THIS LIMITED WARRANTY IS HELD ILLEGAL OR UNENFORCEABLE BY REASON OF ANY LAW, SUCH PARTIAL ILLEGALITY OR UNENFORCEABILITY SHALL NOT AFFECT THE ENFORCEABILITY FOR THE REMAINDER OF THIS LIMITED WARRANTY WHICH PURCHASER ACKNOWLEDGES IS AND WILL ALWAYS BE CONSTRUED TO BE LIMITED BY ITS TERMS OR AS LIMITED AS THE LAW PERMITS. THE PARTIES UNDERSTAND THAT THE PURCHASER MAY USE THIRD-PARTY SOFTWARE OR EQUIPMENT IN CONJUNCTION WITH THE PRODUCT. SAMSUNG MAKES NO WARRANTIES OR REPRESENTATIONS AND THERE ARE NO CONDITIONS, EXPRESS OR IMPLIED, STATUTORY OR OTHERWISE, AS TO THE QUALITY, CAPABILITIES, OPERATIONS, PERFORMANCE OR SUITABILITY OF ANY THIRD-PARTY SOFTWARE OR EQUIPMENT, WHETHER SUCH THIRD-PARTY SOFTWARE OR EQUIPMENT IS INCLUDED WITH THE PRODUCT DISTRIBUTED BY SAMSUNG OR OTHERWISE, INCLUDING THE ABILITY TO INTEGRATE ANY SUCH SOFTWARE OR EQUIPMENT WITH THE PRODUCT. THE QUALITY, CAPABILITIES, OPERATIONS, PERFORMANCE AND SUITABILITY OF ANY SUCH THIRD-PARTY SOFTWARE OR STANDARD LIMITED WARRANTY 143 EQUIPMENT LIE SOLELY WITH THE PURCHASER AND THE DIRECT VENDOR, OWNER OR SUPPLIER OF SUCH THIRD-PARTY SOFTWARE OR EQUIPMENT, AS THE CASE MAY BE. This Limited Warranty allocates risk of Product failure between Purchaser and SAMSUNG, and SAMSUNGs Product pricing reflects this allocation of risk and the limitations of liability contained in this Limited Warranty. The agents, employees, distributors, and dealers of SAMSUNG are not authorized to make modifications to this Limited Warranty, or make additional warranties binding on SAMSUNG. Accordingly, additional statements such as dealer advertising or presentation, whether oral or written, do not constitute warranties by SAMSUNG and should not be relied upon. Samsung Telecommunications America, L.P. 1301 East Lookout Drive Richardson, Texas 75082 Phone: 1-800-SAMSUNG Phone: 1-888-987-HELP (4357) 2003 Samsung Telecommunications America. All rights reserved. No reproduction in whole or in part allowed without prior written approval. Specifications and availability subject to change without notice.
[080802]
STANDARD LIMITED WARRANTY 144 Glossary To help you understand the main technical terms and abbreviations used in this booklet and take full advantage of the features on your mobile phone, here are a few definitions. Call Forwarding Ability to reroute calls to another number. Call Holding Ability to put one call on standby while answering or making another call; you can then switch between the two calls, as required. Call Waiting Ability to inform users that they have an incoming call when engaged on another call. GPRS (General Packet Radio Service) New non-voice value-added service that allows information to be sent and received across a mobile telephone network. GPRS provides continuous connection to the Internet for mobile phone and computer users. It is based on the Global System for Mobile Communication (GSM) circuit-switched cellular phone connections and the Short Message Service (SMS). GSM (Global System for Mobile Communication) International standard for cellular communication, guaranteeing compatibility between the various network operators. GSM covers most European countries and many other parts of the world. Glossary 145 Java Programming language generating applications that can run on all hardware platforms, whether small, medium or large, without modification. It has been promoted for and geared heavily to the Web, both for public Web sites and Intranets. When a Java program runs from a Web page, it is called a Java applet. When it is run on a mobile phone or pager, it is called a MIDlet. Line Identification Services (Caller ID) Services allowing subscribers to view or block the telephone numbers of callers. Multiparty Calling Ability to establish a conference call involving up to five additional parties. Phone Password Security code used to unlock the phone when you have selected the option to lock it automatically each time it switches on. PIN (Personal Identification Number) Security code that protects the phone against unauthorized use. The PIN is supplied by the service provider with the SIM card. It may be a four to eight-digit number and can be changed, as required. PUK (PIN Unblocking Key) Security code used to unlock the phone when an incorrect PIN has been entered three times in succession. The eight-digit number is supplied by the service provider with the SIM card. Glossary 146 Roaming Use of your phone when you are outside your home area (when travelling for example). SDN (Service Dialing Numbers) Telephone numbers supplied by your network provider and giving access to special services, such as voice mail, directory inquiries, customer support and emergency services. SIM (Subscriber Identification Module) Card containing a chip with all the information required to operate the phone (network and memory information, as well as the subscribers personal data). The SIM card fits into a small slot on the back of the phone and is protected by the battery. SMS (Short Message Service) Network service sending and receiving messages to and from another subscriber without having to speak to the correspondent. The message created or received can be displayed, received, edited or sent. Soft Keys Two keys marked which:
Varies according to the function that you are currently on the phone, the purpose of and using Is indicated on the bottom line of the display just above the corresponding key Dual Band Glossary 147 Ability to handle any of the following types of network: GSM 900 and GSM 1900 MHz bands, for greater call success and wider roaming. Voice Mail Computerized answering service that automatically answers your calls when you are not available, plays a greeting
(optionally in your own voice) and records a message. Glossary 148 Index A Access codes 109 Accessories 9 Active Flip 88 Alarm (5.4) 94 Alert type (3.3) 78 Answering a call 25 a second call 47 Anykey Answer 88 Auto Power 90 Auto redial (4.5) 88 B Background Image 81 Backlight 15, 83 Barring calls (6.2) 101 Battery charging 18 low battery indicator 20 Battery Care 124 Broadcast (1.5) 64 C Calculator (5.5) 94 Calendar (5.1) 91 Caller ID (6.5) 102 Calls answering a call 25 a second call 47 barring (6.2) 101 cost (2.5) 77 dialled (2.3) 74, 75, 76 diverting (6.1) 99 ending 24 holding 45 international 23 making 23 missed 26, 74 multiparty 48 received (2.2) 74 records (2) 66 redialling automatically 88 time (2.4) 75 via phonebook 34 waiting (6.3) 47, 101 Card Changing installing the SIM 16 password (4.6.4) 86 PIN (4.6.2) 85 PIN2 (4.6.7) 87 Characters changing mode 40 entering 40 Charging battery 18 Closed User Group (6.6) 103 Colour Theme 81 Conference call 48 Connect tone 80 Copying memos 93 phonebook number 34 task 96 Correcting numbers 23 Cost of call 77 CUG 103 Currency Exchange (5.6) 98 D Dangerous Areas 123 Date setting (5.3.2) 93 Deleting memos 93 messages 59 missed calls 27 phonebook number 33 tasks 97 Dialled calls (2.3) 74, 75, 76 Display icons 14 Index 149 layout 13 setting language 84 Diverting calls (6.1) 99 E Earpiece volume 25 Editing memos 92 messages 59 missed calls 27, 74 phonebook number 33 tasks 96 to do list 95 Error tone 80 F FCC Notice 125 FDN mode (4.6.6) 86 Fixed Dial Number mode 86 Flying 122 Fun Box (7) 103 Functions selecting 29 G Game (7.1) 103, 104 Greeting message (4.3) 84 Groups user 103 H Holding calls 45 I Icons description 14 Identifying a caller 25 Infrared Activate (4.1) 81 IrDA port 81 K Key tones adjusting volume 25 muting 46 selecting (3.4) 78 sending 46 Keypad tone (3.4) 78 Keys description 11 location 10 shortcut 89 L Language (4.5) 84 Last number, redial 24 Length of calls 75, 80 Letters changing mode 40 entering 40 Light Locking backlight 15, 83 service 16 phone (4.6.3) 82 SIM card (4.6.5) 86 Low battery indicator 20 Lower-case characters entering 42 M Memory Status message (1.8) 66 phonebook 39 Memos copying 93 deleting 93 editing 92 writing 92 Menus accessing by scroll 50 accessing by shortcuts 51 list 52 Message tone (3.5) 78 Messages broadcast (1.5) 64 setup (1.4) 62 templates (1.3) 62 voice mail (1.6) 66 writing (1.2) 59 Microphone mute 46 Minute minder 80 Missed calls (1.1) 26, 74 Morning Call 90 Multiparty calls dropping 49 making 48 private conversation 48 Muting key tones 46 microphone 46 My Contents (1.7) 66 N Names entering 40 searching/dialling 34 storing 31 Network selection (6.4) 102 Network services (7) 99 Numbers copying phonebook 34 correcting 23 erasing 33 fixed dial 86 own 84 pasting phonebook 33 searching/dialling 34 storing 31 O Options selecting 29 Organiser (5) 90 Own number (4.4) 84 Owner's Record 139 P Password phone changing 86 code 109 Peak Performance 120 Phone lock (4.6.3) 82 password 109 settings (4) 81 Phone While Driving 121 Phone while driving 121 Phonebook copying 34 editing 33 erasing 33 options 33 pasting 33 searching/dialling 34 speed-dialling 37 storing numbers/names 31 PIN PIN2 changing 85 checking 85 code 110 changing 87 code 111 Power Save Feature 119 Problem solving 106 PUK 110 PUK2 111 R Radio Frequency 120 Received calls (2.2) 74 Reception 119 Redialling automatically 88 last number 24 Reset setting (4.10) 89 Ring tone (3.1) 77 type (3.3) 78 volume (3.2) 77 Index 150 Index 151 Roaming 102 S Safe Use of and Access to Your Phone 121 Safety information 119 quick guide 7 Safety Guidelines 122 Schedule 91 Searching in phonebook 34 Security (6) 99 Selecting functions/options 29 Sending key tones 46 messages 59 Service light 16 Setting alarm (5.4) 94 date (5.3.2) 93 language (4.5) 84 time (5.3.1) 93 Shortcut (4.9) 89 Silent mode 29 SIM card installing 16 locking 86 SIM Lock (4.6.5) 86 SMS message icon 58 setup 62 using 47, 57, 58 Soft keys 29 Solving problems 106 Sound settings (3) 77 Special Precautions 125 Speed-dialling 37 Switching on/off microphone 46 phone 20 T T9 mode 41 Index 152 Tasks defining 95 editing 95 Templates (2.3) 62 Text changing mode 40 entering 40 Time call 75 format (5.3.4) 94 setting (5.3.1) 93 world (5.3.3) 93 To do list (5.2) 95 Tone connect 80 error 80 keypad 78 message 78 ring 77 Travel adapter 18 U Unpacking 9 Upper-case characters entering 42 User group 103 User Guide Proprietary Notice 139 V Vibration 78 Voice mail (1.6) 66 Voice server 64 Volume adjusting 25 selecting the ring 77 W Waiting call 47, 101 World time (5.3.3) 93 Write messages (2.2) 59 Writing memos 92 e n o h p e l e T S R P G 5 2 2 C
H G S d n a B l a u D d r a C e c n e r e f e R k c i u Q
. y e k t f o s u n e M e h t s s e r P l e h t d o h d n a s s e r P
. y e k f f O
n O h c t i w S
. r e b m u n e h t n i y e K
. y e k e h t s s e r P l l a C a e k a M e h t s s e r p y l f e i r B
. y e k l l a C a d n E s y e k w o r r a N W O D d n a d e s s i m e h t h g u o r h t P U e h t h t i w l l o r c S
. s l l a c s s e r p
, l l a c e h t n r u t e r o T
. y e k e h t d n a e n o h p e h t n e p O t f o s w e i V e h t s s e r p
. y e k d e s s i M w e V i s l l a C l i y e t a d e m m I g n i s s i M r e t f A m e h T e h t h c a e r u o y l i t n u s u n e m d n a P U e h t h t i w l l o r c S e h t f o t s i l e h t h g u o r h t s y e k w o r r a N W O D
. u n e m d e r i u q e r
. y e k t f o s t c e l e S e h t s s e r P d e r i u q e r e h t l i t n u s n o i t p o e h t f o t s i l e h t h g u o r h t d n a P U e h t h t i w l l o r c S s y e k w o r r a N W O D l
. d e t c e e s s i e n o e h t s s e c c A s n o i t c n u F u n e M
. y e k t f o s t c e l e S e h t s s e r P y b d e t a c i d n i n o i t c n u f e h t m r o f r e p
) e h t n i e n i l m o t t o b
t i e v o b a t x e t e h t d n a
s y e k t f o s o w t e h t f o h c a E l
) y a p s i d T y p e C h o o s e t h e A e r t l l V o u m e A d j u s t t h e M e l o d y L i g h t o n l y i V b r a t i o n i V b r a
M e l o d y l S e e c t a n o p t i o n
P r e s s t h e S e l e c t s o f t k e y
. m e n u o p t i o n
4
. 3
. l S e e c t t h e A l e r t T y p e p h o n e
. k e y o n t h e l e f t s i d e o f t h e P r e s s t h e U P o r D O W N a r r o w C a l l A n s w e r a o r O p e n t h e p h o n e P r e s s t h e k e y
. t h e P h o n e b o o k N u m b e r i n S e a r c h f o r a t h e P h o n e b o o k S t o r e N u m b e r s i n P r e s s t h e k e y t o d a l
. i T o s c r o l l t h r o u g h t h e a n d D O W N a r r o w k e y s
. n u m b e r s
, p r e s s t h e U P P r e s s t h e V i e w s o f t k e y
. a r r o w k e y s
. p r e s s t h e U P a n d D O W N T o s c r o l l t h r o u g h t h e n a m e s
, l S e e c t t h e S e a r c h o p t i o n
. E n t e r t h e s t a r t o f t h e n a m e
. P r e s s t h e P h
. B o o k s o f t k e y
. P r e s s t h e O K s o f t k e y
. P r e s s t h e l t o i d e m o d e
. k e y t o r e t u r n l o c a t i o n
. I f n e c e s s a r y
, c h a n g e t h e E n t e r t h e n a m e
. P r e s s t h e O K s o f t k e y
. K e y i n t h e n u m b e r
. l S e e c t a n i c o n f o r l a b e l
. P r e s s t h e S a v e s o f t k e y
. P r e s s t h e S e l e c t s o f t k e y
| frequency | equipment class | purpose | ||
|---|---|---|---|---|
| 1 | 2004-07-08 | 1850.2 ~ 1909.8 | PCE - PCS Licensed Transmitter held to ear | Original Equipment |
| app s | Applicant Information | |||||
|---|---|---|---|---|---|---|
| 1 | Effective |
2004-07-08
|
||||
| 1 | Applicant's complete, legal business name |
Samsung Electronics Co Ltd
|
||||
| 1 | FCC Registration Number (FRN) |
0027908797
|
||||
| 1 | Physical Address |
19 Chapin Rd., Building D
|
||||
| 1 |
Pine Brook, New Jersey 07058
|
|||||
| 1 |
United States
|
|||||
| app s | TCB Information | |||||
| 1 | TCB Application Email Address |
r******@pctestlab.com
|
||||
| 1 | TCB Scope |
B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27
|
||||
| app s | FCC ID | |||||
| 1 | Grantee Code |
A3L
|
||||
| 1 | Equipment Product Code |
SGHC225
|
||||
| app s | Person at the applicant's address to receive grant or for contact | |||||
| 1 | Name |
J****** C********
|
||||
| 1 | Title |
General Manager
|
||||
| 1 | Telephone Number |
973-8********
|
||||
| 1 | Fax Number |
973-8********
|
||||
| 1 |
j******@samsung.com
|
|||||
| app s | Technical Contact | |||||
| 1 | Firm Name |
PCTEST Engineering Lab., Inc.
|
||||
| 1 | Name |
R******** O******
|
||||
| 1 | Physical Address |
6660-B Dobbin Road
|
||||
| 1 |
Columbia, Maryland 21045
|
|||||
| 1 |
United States
|
|||||
| 1 | Telephone Number |
410-2********
|
||||
| 1 | Fax Number |
410-2********
|
||||
| 1 |
r******@pctestlab.com
|
|||||
| app s | Non Technical Contact | |||||
| n/a | ||||||
| app s | Confidentiality (long or short term) | |||||
| 1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
| 1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
| 1 | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 08/22/2004 | ||||
| if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
| app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
| 1 | Is this application for software defined/cognitive radio authorization? | No | ||||
| 1 | Equipment Class | PCE - PCS Licensed Transmitter held to ear | ||||
| 1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Single-Band PCS GSM Phone | ||||
| 1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
| 1 | Modular Equipment Type | Does not apply | ||||
| 1 | Purpose / Application is for | Original Equipment | ||||
| 1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
| 1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
| 1 | Grant Comments | Output is EIRP. SAR compliance for body-worn operating configuration is based on a separation distance of 1.5 cm between the back of the phone and the body of the user. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. Belt clips or holsters may not contain metallic components. The highest reported SAR values are Head: 1.16 W/kg: Body-worn: 0.404 W/kg. This device contains 900 MHz GSM functions that are not operational in U.S. Territories. This filing is only applicable for 1900 MHz PCS operations. | ||||
| 1 | Is there an equipment authorization waiver associated with this application? | No | ||||
| 1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
| app s | Test Firm Name and Contact Information | |||||
| 1 | Firm Name |
SAMSUNG ELECTRONICS CO., LTD.
|
||||
| 1 | Name |
N****** P******
|
||||
| 1 | Telephone Number |
82-31********
|
||||
| 1 | Fax Number |
82-31********
|
||||
| 1 |
n******@samsung.co..kr
|
|||||
| Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 1 | 1 | 24E | 1850.20000000 | 1909.80000000 | 1.7060000 | 2.5000000000 ppm | 250KGXW | ||||||||||||||||||||||||||||||||||
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC